DIGITAL CAMERA
SP-800UZ
Instruction Manual
●
Thank you for purchasing an Olympus digital camera. Before you start to
use your new camera, please read these instructions carefully to enjoy
optimum performance and a longer service life. Keep this manual in a
safe place for future reference.
●
●
●
The application software and instruction manual PDF file are stored on
the internal memory of the camera.
We recommend that you take test shots to get accustomed to your
camera before taking important photographs.
In the interest of continually improving products, Olympus reserves the
Download from Www.Somanuals.com. rAighllt tMo uapndauteaolsr mSodeifay rincfohrmAatniodn cDonotawinendloinathdis.manual.
Camera Settings
Using the Direct Buttons
Frequently used functions can be accessed using the direct buttons.
Operation guide
The symbols FGHI displayed for image selections
and settings indicate that the wheel controller is to
be used by pressing, not turning, the wheel controller
sections shown below.
4/30
X
Y
M
D
TIME
14M
NORM
Y/M/D
2010.02.26 12:30
FILE
100 0004
’10/02/26 12:30
OK
PRINT
MORE
MENU
OK
SET
SINGLE PRINT
CANCEL
Wheel controller
F (up) /
INFO button (changing
information display) (p. 17, 19)
Zoom lever (p. 16, 19)
H (left)
I (right)
Shutter button (p. 15, 53)
Movie record button (p. 16)
A button
G (down) /
D button (erase) (p. 18)
qbutton (switching
between shooting and
playback) (p. 16, 17, 41)
Operation guides displayed at the bottom of the screen
indicate that the m button, A button, or zoom lever
be used.
1
IMAGE SIZE
COMPRESSION
SHADOW ADJUST
AF MODE
14M
NORMAL
AUTO
m button (p. 4)
2
FACE/iESP
ESP
1
2
3
ESP/
FINE ZOOM
DIGITAL ZOOM
OFF
OFF
E button (menu guide/
camera guide) (p. 20)
MENU
OK
SET
EXIT
OK
SET
OK
MENU
ERASE/CANCEL
Operation guide
EN
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu
Use the menu to change camera settings such as the shooting mode.
Press the m button to display the function menu. The function menu can be used to set frequently
used shooting and playback functions such as shooting mode.
Selected option
Shooting
Playback
Shooting
mode
PROGRAM AUTO
SLIDESHOW
PHOTO SURFING
EVENT
P
BEAUTY FIX
EDIT
Function
menu
0.0
WB
AUTO
ERASE
ISO
AUTO
o [SETUP]
menu
SETUP
14M
4
To select the shooting mode
Use FG to select a menu and press
Use HI to select the shooting mode and
press the A button.
the A button.
To select the function menu
Use FG to select a menu and use HI to
select a menu option. Press the A button to
set the function menu.
In the [SETUP] menu, various camera functions can be set,
including shooting and playback functions not displayed in the
function menu, and other settings such as date, time and screen
display.
1
Select [SETUP] and then press the A
button.
4
Use FG to select the desired submenu 2
and then press the A button.
● The [SETUP] menu is displayed.
● Once a setting is selected, the display returns
to the previous screen.
1
IMAGE SIZE
14M
2
COMPRESSION
SHADOW ADJUST
AF MODE
NORMAL
AUTO
There may be additional operations.
“Menu Settings” (p. 30 to 47)
FACE/iESP
ESP
1
2
3
ESP/
1
X
--.--.-- --:--
FINE ZOOM
DIGITAL ZOOM
OFF
2
WORLD TIME
TV OUT
x
OFF
MENU
OK
SET
EXIT
POWER SAVE
REC VIEW
ON
ON
1
2
PIC ORIENTATION ON
2
Press H to select the page tabs. Use FG
to select the desired page tab and press I.
3
MENU
OK
SET
EXIT
Page tab
Submenu 1
5
Press the m button to complete the
1
2
1
2
X
--.--.-- --:--
X
--.--.-- --:--
WORLD TIME
TV OUT
x
WORLD TIME
TV OUT
x
setting.
POWER SAVE
REC VIEW
OFF
ON
POWER SAVE
REC VIEW
OFF
ON
Some functions cannot be used in some
shooting modes. In such cases, the
following message is displayed after
setting.
1
2
1
2
PIC ORIENTATION ON
PIC ORIENTATION ON
3
3
MENU
OK
MENU
OK
SET
EXIT
SET
EXIT
1
IMAGE SIZE
14M
NORMAL
AUTO
2
COMPRESSION
SHADOW ADJUST
3
Use FG to select the desired submenu 1
and then press the A button.
Submenu 2
CONFLICTING SETTINGS
OFF
OFF
2
3
FINE ZOOM
DIGITAL ZOOM
1
2
1
2
X
WORLD TIME
TV OUT
--.--.-- --:--
X
WORLD TIME
TV OUT
POWER SAVE
x
MENU
OK
SET
EXIT
OFF
POWER SAV
POWER SAVE
REC VIEW
OFF
ON
ON
1
2
1
2
REC VIEW
PIC ORIENTATION ON
PIC ORIENTA
3
3
MENU
OK
MENU
OK
SET
EXIT
SET
EXIT
4
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Index
Menus for Shooting Functions
PROGRAM AUTO
1
2
3
4
5
6
7
8
P
1
2
9
IMAGE SIZE
COMPRESSI
SHADOW ADJU
AF MODE
14M
1
2
R
OFF
IMAGESTABILIZ
1
2
IMAGE SIZE
VGA
BKT
IMAGE QUALITY NORMAL
1
2
3
ESP/
NOISE REDUC
0.0
IS MOVIE MODE
OFF
ON
FINE ZOOM
DIGITAL ZOO
WB
1
2
3
SET TIME LAP
AUTO
R
AF ILLUMINA
ISO
1
2
3
FULLTIME AF
OFF
MENU
AUTO
EXIT
ICON GUIDE
MENU
EXIT
14M
4
MENU
OK
SET
EXIT
DIGITAL ZOOM.................p.32
R (Still images)..................p.33
R (Movies).........................p.33
IMAGE STABILIZER
(Still images)/
IS MOVIE MODE
(Movies).............................p.33
BKT....................................p.33
NOISE REDUCT. ..............p.34
SET TIME LAPSE .............p.34
FULLTIME AF....................p.34
AF ILLUMINAT. .................p.34
ICON GUIDE.....................p.34
1 Shooting mode
P (PROGRAM AUTO).......p.15
8 Drive..................................p.29
9 o (SETUP)
IMAGE SIZE
(Still images)......................p.30
IMAGE SIZE (Movies).......p.30
COMPRESSION
(Still images)......................p.30
IMAGE QUALITY
(Movies).............................p.30
SHADOW ADJUST ...........p.31
AF MODE..........................p.31
ESP/n ............................p.32
FINE ZOOM ......................p.32
M
(iAUTO)....................p.21
s (SCENE MODE) ......p.21
P (MAGIC FILTER).....p.23
A (PANORAMA)...............p.23
Q(BEAUTY)................p.25
2 Flash..................................p.26
3 Macro ................................p.26
4 Self-timer...........................p.27
5 Exposure compensation....p.27
6 White balance....................p.28
7 ISO ....................................p.28
Menus for Playback, Editing, and Printing Functions
SLIDESHOW
PHOTO SURFING
EVENT
1
2
3
4
5
6
7
8
1
2
PRINT ORDER
0
y
R
COLLECTION
BEAUTY FIX
EDIT
1
2
3
MENU
OK
SET
EXIT
ERASE
SETUP
y (Rotate).........................p.40
R (Add sound to still images)
.......................................p.40
1 SLIDESHOW.....................p.35
2 PHOTO SURFING.............p.35
3 EVENT q........................p.36
4 COLLECTION q.............p.36
5 BEAUTY FIX......................p.37
6 EDIT ..................................p.38
7 ERASE ..............................p.39
8 o (SETUP)
PRINT ORDER..................p.40
0(Protect) .....................p.40
Menus for Other Camera Settings
PW ON SETUP .................p.42
SOUND SETTINGS ..........p.43
FILE NAME .......................p.43
PIXEL MAPPING...............p.44
s (Monitor).....................p.44
3 t (Settings 3)
X(Date/time)..................p.44
WORLD TIME....................p.45
TV OUT .............................p.45
POWER SAVE...................p.47
REC VIEW.........................p.47
PIC ORIENTATION ...........p.47
1 r (Settings 1)
INTERNAL/SD...................p.41
MEMORY FORMAT/
FORMAT............................p.41
DATA REPAIR ...................p.41
u COPY.....................p.41
D (Language) ................p.41
RESET...............................p.42
USB CONNECTION..........p.42
2 s (Settings 2)
1
2
INTERNAL/SD
MEMORY FORMAT
DATA REPAIR
COPY
AUTO
1
2
3
ENGLISH
1
2
3
RESET
USB CONNECTION
PC
MENU
OK
EXIT
SET
qPOWER ON ................p.42
SAVE SETTINGS..............p.42
EN
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of Parts
Camera unit
3
9
9
1
4
5
2
6
9
7
8
1
Self-timer lamp/
6
7
8
9
Card slot.......................................p. 14
Battery/card compartment cover...p. 10
Tripod socket
AF illuminator .........................p. 27, 34
Speaker
2
3
4
5
Flash ............................................p. 26
Microphone ............................p. 33, 40
Lens .............................................p. 58
Flash knob (Flash flip-up).............p. 26
6
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
3
1
2
4
5
6
7
8
9
10
13
14
11
12
1
15
1
1
2
3
4
Strap eyelet..................................p. 10
Monitor .........................p. 8, 15, 44, 53
Movie record button .....................p. 16
Indicator lamp
8
9
E button
(camera guide/menu guide) .........p. 20
m button ..............................p. 3, 4
10 Connector cover......... p. 11, 12, 46, 48
11 Multi-connector........... p. 11, 12, 46, 48
12 HDMI micro connector .................p. 46
13 Zoom lever .............................p. 16, 19
14 Shutter button.........................p. 15, 53
15 n button........................p. 13, 15
5 qbutton (switching between
shooting and playback) ....p. 16, 17, 42
6
7
A button (OK) ...............................p. 3
Wheel controller .............................p. 3
INFO button (changing
information display).............p. 17, 19
D button (erase) .......................p. 18
EN
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitor
Shooting mode display
1
2
P
25
24
3
4
5
23
22
21
20
19
0.0
6
WB
7
AUTO
ISO
8
AUTO
00:34
9
NR
14M
4
NORM
10
18 17 16 15 14 13 12 11
1/100 F2.8
27 26
Still image
1
2
3
Battery check .........................p. 12, 54
Shooting mode.......................p. 15, 21
Flash ............................................p. 26
Flash standby/flash charge ..........p. 53
Macro/super macro ......................p. 26
Self-timer......................................p. 27
Exposure compensation...............p. 27
White balance ..............................p. 28
ISO...............................................p. 28
Drive.............................................p. 29
15 Shadow Adjustment Technology
....................................................p. 31
16 Compression (still images).....p. 30, 61
17 Image size (still images).........p. 30, 61
18 Number of storable still pictures
(still images).................................p. 15
19 Current memory ...........................p. 60
20 Movie recording icon....................p. 16
21 Remaining recording time
(movies) .......................................p. 16
22 Image size (movies).....................p. 30
23 Histogram.....................................p. 17
24 AF target mark .............................p. 15
25 Camera shake warning
26 Aperture value..............................p. 15
27 Shutter speed...............................p. 15
4
5
6
7
8
9
10 [SETUP] menu ...........................p. 4, 5
11 Noise reduction ............................p. 34
12 World time....................................p. 45
13 Image stabilization (still images)/
Digital image stabilization (movies)
....................................................p. 33
14 Metering .......................................p. 32
8
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback mode display
● Standard display
1
2
3 4
5 6
1
10
4/30
00:12/00:34
6
’10/02/26 12:30
17
Still image
● Advanced display
Movie
1
2
3 4
5 6
8
9
10 11
10
4/30
1/1000 F2.8
2.0
ISO WB
7
22
21
20
19
12
13
14
15
16
P
AUTO AUTO
1/1000 F2.8
2.0
14M
NORM
ISO WB
P
AUTO AUTO
18
FILE
14M
NORM
100 0004
FILE
100 0004
’10/02/26 12:30
17
’10/02/26 12:30
1
2
Battery check .........................p. 12, 54
Print reservation/
11 Exposure compensation...............p. 27
12 White balance ..............................p. 28
13 Compression (still images).....p. 30, 61
Image quality (movies)...........p. 30, 61
14 Image size..............................p. 30, 61
15 Drive.............................................p. 29
16 File number
number of prints .....................p. 51, 50
Protect..........................................p. 40
Adding sound .........................p. 33, 40
Current memory ...........................p. 60
Number of frame/total number of
3
4
5
6
images (still images) ....................p. 17
Elapsed time/total recording time
17 Date and time...............................p. 13
18 Metering .......................................p. 32
19 Shadow Adjustment Technology
...................................................p. 31
20 Flash ............................................p. 26
21 Shooting mode.......................p. 15, 21
22 Macro ...........................................p. 26
(movies) .......................................p. 18
Histogram.....................................p. 17
Shutter speed...............................p. 15
Aperture value..............................p. 15
7
8
9
10 ISO...............................................p. 28
EN
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Camera
Attaching the camera strap
and lens cap
Inserting the battery
1
1
Battery/card
compartment cover
2
3
2
4
Battery lock knob
Align l to the battery lock knob side and
insert as shown in the figure. If you insert
the battery reversely, the camera will
not turn on even if the n button is
pressed.
Damage to the battery exterior (scratches,
etc.) may produce heat or an explosion.
● Attach the strap to the other eyelet in the same manner.
5
Insert the battery while sliding the battery
lock knob in the direction of the arrow.
Slide the battery lock knob in the direction
of the arrow to unlock, and then remove the
battery.
Turn off the camera before opening the
battery/card compartment cover.
When using the camera, be sure to close
the battery/card compartment cover.
Pull the strap tight so that it does not come
loose.
10 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera setup
Battery charge and camera
setup
Set the camera date and time, time zone
and display language automatically; install
the camera instruction manual and PC
software (ib).
Connect the camera to the computer to charge
the battery and setup the camera.
Do not insert SD/SDHC memory cards
before the camera setup.
System requirements
Windows XP (SP2 or later)/
Windows Vista/Windows 7
Do not format the internal memory until the
camera setup is complete. Doing so will
erase the camera instruction manual and
the PC software (ib) data that are stored on
the internal memory.
When using another system other
than the above or no computer,
see “Charging the battery with the
included USB-AC adapter.” (p. 12)
Check that your computer meets the
following system requirements:
Windows XP (SP2 or later)/
1
Connect the camera to the
computer.
Windows Vista/Windows 7
Refer to the PC software (ib) help guide for
details on how to use the PC software (ib).
Open the connector cover
in the direction of the arrow.
2
Select and execute “OLYMPUS
Camera Initialization”, which is
displayed on the computer screen
when the camera is recognized by
the computer.
Multi-
connector
If nothing is displayed on the camera screen
even after connecting the camera to the
computer, the battery may be exhausted.
Leave the camera connected to the
USB cable (supplied)
computer until the battery has charged, then
disconnect and reconnect the camera.
Even if a computer has USB ports, proper
operation is not guaranteed in the following
cases.
● Computers with USB ports installed using an
expansion card, etc.
● Computers without a factory-installed OS and
home-built computers
Charging the battery
Double-click the icon for the camera drive
(Removable Disk), and then execute
CameraInitialSetup.exe to start the camera
setup.
When the camera is connected to the
computer, the battery in the camera will be
charged.
● When charging, the indicator lamp light. When
charging is complete, the indicator lamp will turn
off.
3
Follow the instructions on the
computer screen and setup the
camera.
If the indicator lamp does not light, the
camera may be incorrectly connected, or
the battery, camera, computer, or USB cable
may not be functioning correctly.
EN 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the battery with the
included USB-AC adapter
The battery is not fully charged at shipment.
Before use, be sure to charge the battery
until the indicator lamp turns off (up to 3.5).
The included USB-AC adapter (F-2AC)
(hereafter referred as AC adapter) has
been designed to be used for charging
and playback. Make sure that shooting
is not being used while the AC adapter is
connected to the camera.
If the indicator lamp does not light, the AC
adapter is not connected to the camera
correctly, or the battery, camera, or AC
adapter may be broken.
For details on the battery and the AC
adapter, see “Battery, USB-AC adapter
(included), Charger (sold separately)”
(p. 58).
Example: AC adapter with an AC cable
Battery can be charged by connecting
the camera to the computer. However,
when charging with the system other than
Windows XP (SP2 or later)/Windows Vista/
Windows 7, charging takes much time.
1
Open the connector cover
in the direction of the arrow.
Multi-
connector
When to charge the batteries
Charge the battery when the error message
shown below appears.
Flashes in red
2
BATTERY EMPTY
USB cable (supplied)
14M
4
Monitor top left
Error message
When not using a computer
See the next section under “Setting the date,
time and time zone.”
1
3
AC outlet
When using a computer with system
other than Windows XP (SP2 or later)/
Windows Vista/Windows 7
The Instruction Manual PDF file can be
saved on a computer with the following
procedure.
2
● Connect the camera to the computer and copy
the instruction manual PDF file for your language
in the “Manual” folder in the internal memory of
the camera.
Indicator lamp
On: Charging
Off: Charged
12 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the date, time and
time zone
4
5
As in Steps 2 and 3, use FGHI
and the A button to set [M]
(month), [D] (day), [TIME] (hours
and minutes), and [Y/M/D] (date
order).
The date and time set here are saved to image
file names, date prints, and other data.
1
Press the n button to turn on
the camera.
For a more accurate setting, press the
A button when the time signal hits
00 seconds.
● The date and time setting screen is displayed
when the date and time are not set.
To change the date and time, adjust the
setting from the menu. [X] (Date/time)
(p. 44)
X
Y
M
--
D
TIME
Use HI to select the [x] time
zone and then press the A button.
● Use FG to turn daylight saving time ([SUMMER])
on or off.
Y/M/D
----
.
.
-- -- --
:
MENU
CANCEL
’10.02.26.12:30
Date and time setting screen
Seoul
Tokyo
2
3
Use FG to select the year for [Y].
X
OK
SET
SUMMER
Y
M
D
TIME
Y/M/D
2010. --
.
-- -- --
:
The menus can be used to change the
selected time zone. [WORLD TIME] (p. 45)
MENU
CANCEL
Press I to save the setting for [Y].
X
Y
M
D
TIME
Y/M/D
2010.00. -- -- --
:
MENU
CANCEL
EN 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display language
1
2
Write-protect switch
Contact area
The language for the menu and error messages
displayed on the monitor is adjustable.
1
Display the [SETUP] menu.
“Using the Menu” (p. 4)
2
r
Use FG to select the
(Settings
1) tab and then press I.
Insert the card straight until it clicks into
place.
1
INTERNAL/SD
AUTO
Do not touch the contact area directly.
2
MEMORY FORMAT
DATA REPAIR
COPY
1
ENGLISH
PC
2
3
RESET
USB CONNECTION
MENU
OK
SET
EXIT
3
4
5
Use FG to select [D] and press
the A button.
“Number of storable pictures (still images)/
Remaining recording time (movies) in the
internal memory and SD/SDHC memory
cards” (p. 61)
Use FGHI to select your
language and press the A button.
To remove the SD/SDHC memory card
Press the m button.
1
2
Inserting the SD/SDHC
memory card (sold separately)
Always use SD/SDHC memory cards with
this camera. Do not insert other types of
memory card. “Using an SD/SDHC memory
card” (p. 59)
Press the card in until it clicks and comes
out slightly, then remove the card.
Although the camera can store images in
internal memory, SD/SDHC memory cards
(sold separately) can be also used to store
pictures.
14 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting, Playback, and Erasing
Shooting with the optimum
3
Hold the camera and compose the
shot.
aperture value and shutter
speed (P mode)
In this mode, automatic shooting settings are
activated while also allowing changes to a wide
range of other shooting menu functions, such
as exposure compensation, white balance, etc.
as needed.
Monitor
Horizontal grip
1
Remove the lens cap.
2
Press the n button to turn on
the camera.
P mode indicator
Vertical grip
P
When holding the camera, take care not to
cover the flash with your fingers, etc.
0.0
WB
AUTO
4
ISO
Press the shutter button halfway
down to focus on the subject.
● When the camera focuses on the subject, the
exposure is locked (shutter speed and aperture
value are displayed), and the AF target mark
changes to green.
AUTO
00:34
14M
4
Number of storable still pictures (p. 61)
Monitor
(standby mode screen)
● The camera was unable to focus if the AF target
mark flashes red. Try focusing again.
If P mode is not displayed, press the m
button to display the function menu screen
and then set the shooting mode to P. “Using
the Menu” (p. 4)
AF target mark
P
Current shooting mode display
PROGRAM AUTO
P
Press halfway
1/400 F2.8
Shutter speed Aperture value
“Focusing” (p. 55)
0.0
WB
AUTO
ISO
AUTO
14M
4
Press the n button again to turn off
the camera.
EN 15
Download from Www.Somanuals.com. All Manuals Search And Download.
5
2
To take the picture, gently press
the shutter button all the way down
while being careful not to shake the
camera.
Press the movie record button
again to stop recording.
Using the zoom
P
Turning the zoom lever adjusts the shooting
range.
W side
T side
Press fully
1/400 F2.8
Zoom bar
Image review screen
P
P
To view images during shooting
Pressing the qbutton enables playback of
images. To return to shooting, either press
the qbutton or press the shutter button
halfway down.
0.0
0.0
WB
WB
AUTO
AUTO
ISO
ISO
AUTO
AUTO
00:34
00:34
14M
14M
4
4
Optical zoom: 30x, Digital zoom: 5x
Shooting movies
To take larger images without reducing
image quality
[FINE ZOOM] (p. 32)
1
Press the movie record button to
start recording.
To take larger images
[DIGITAL ZOOM] (p. 32)
Remaining recording time (p. 61)
The zoom bar appearance identifies the
status of the fine zoom/digital zoom.
When using
optical zoom
Optical zoom range
00:34
REC
00:12
When using
fine zoom
Recording time
Fine zoom
range
Lights up red when recording
When using
digital zoom
The effects of the set shooting mode can
be used when shooting movies (when
P mode, A mode or Q mode is
set, shooting is performed with the P mode
setting).
Digital zoom
range
Sound will also be recorded.
During sound recording, only the digital
zoom can be used. To record a movie with
optical zoom, set [R] (movies) (p. 33) to
[OFF].
16 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the shooting
information display
Viewing images
1
The display of the screen information can
be changed to best match the situation, for
example, the need for a clear view of the screen
or for making a precise composition by using the
grid display.
Press the q button.
Number of frames/
Total number of images
4/30
1
Press F (INFO).
● The displayed shooting information changes in
the order shown below each time the button is
pressed. “Shooting mode display” (p. 8)
Normal
’10/02/26 12:30
P
Playback image
0.0
WB
AUTO
No information
ISO
2
AUTO
Turn the wheel controller to select
an image.
00:34
14M
4
● It can be performed by pressing HI.
Detailed
P
Displays
Displays
previous
next image
image
0.0
WB
AUTO
ISO
AUTO
00:34
14M
4
NORM
Keep turning the wheel controller to fast
forward or reverse. It can be performed by
holding HI.
Reading a histogram
The display size of the images can be
changed. “Index view, close-up view, and
event index” (p. 19)
If the peak fills too much of the frame,
the image will appear mostly white.
If the peak fills too
much of the frame,
the image will
To play sound recordings
To play sound recorded with an image,
select the image and press the A button. A
! icon appears on images with which sound
has been recorded.
appear mostly black.
The green section shows
luminance distribution
within the screen’s center.
[R] (still images) (p. 33)
During audio playback
EN 17
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back movies
Operations while playback is paused
Select a movie, and press the A button.
4/30
00:14/00:34
OK
During pause
MOVIE PLAY
’10/02/26 12:30
Movie
Use F to display the first
Cueing
frame and press G to display
the last frame.
Operations during movie playback
Turn the wheel controller to
advance or rewind by one
frame at a time. Keep turning
the wheel controller for
Advancing
and rewinding
one frame at a
time*1
continuous advance or rewind.
Resuming
playback
Press the A button to resume
playback.
Elapsed time/
Total recording
time
00:12/00:34
To operate with HI
During playback
*1
Press I or H to advance or rewind one frame
at a time. Hold I or H pressed for continuous
advance or rewind.
Press the A button to pause
playback. During pause, fast
forward or reverse, press the
A button to restart playback.
Pausing and
restarting
playback
To stop movie playback
Press the m button.
Press I to fast forward. Press
Fast forward I again to increase the fast
forward speed.
Erasing images during
Press H to rewind. The speed
at which the recording rewinds
playback (Single image erase)
Rewind
increases each time H is
pressed.
1
Display the image you want to erase
Turn the wheel controller
and press G ( ).
Adjusting the
or use FG to adjust the
volume
D
volume.
ERASE
ALL ERASE
SEL. IMAGE
ERASE
CANCEL
MENU
OK
SET
CANCEL
2
Press FG to select [ERASE], and
press the A button.
[ALL ERASE] (p. 39) and [SEL. IMAGE]
(p. 39) can be used to erase multiple images
at the same time.
18 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
To select an image in index view
Index view, close-up view, and
event index
Use FGHI to select an image, and press
the A button to display the selected image
in single-image view.
Index view enables quick selection of a desired
image. Close-up view (up to 10x magnification)
allows checking of image details. In event
index*1, images are grouped by the shooting
dates and representative images for an event
can be displayed.
To scroll an image in close-up view
Use FGHI to move the viewing area.
To select an image in event index
*1
Pictures with different dates can be grouped into the
same event using the PC software (ib).
Use HI to select the representative image
and press the A button. The images in the
selected event are played back.
1
Turn the zoom lever.
Changing the image
information display
Shooting information settings displayed on the
screen can be changed.
W side
T side
Close-up view
Single-image view
1
Press F (INFO).
● The displayed image information changes in
the order shown below each time the button is
pressed.
4/30
4/30
W
T
Normal
’10/02/26 12:30
’10/02/26 12:30
10
4/30
W
T
No information
Index view
’10/02/26 12:30
’10/02/26
Detailed
2
10
4/30
4
1/1000 F2.8
2.0
ISO WB
P
W
T
AUTO AUTO
14M
NORM
’10/02/26
FILE
100 0004
’10/02/26 12:30
2
4
“Reading a histogram” (p. 17)
W
T
Event index
’10/02/26
EN 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back panorama
images
Using the menu guide
If the E button is pressed while settings are
being adjusted in the playback function or
[SETUP] menus, a description of the selected
option is displayed.
Panorama images that were combined together
using [AUTO] or [MANUAL] can be scrolled for
viewing.
“Using the Menu” (p. 4)
“Creating panoramic images (A mode)”
(p. 23)
Using the camera guide
1
Select a panorama image during
playback.
Use the camera guide to look up camera
operations.
“Viewing images” (p. 17)
4/30
1
Press the E button in the standby
mode screen or the playback
screen.
IN-CAMERA MANUAL
Search
Learn about the camera
History
OK
REPLAY
’10/02/26 12:30
Message
2
Press the A button.
EXIT
OK
SET
Submenu 2
Search
Application
Functions or operating methods
can be searched from a term or
shooting objective.
Information is shown about
recommended functions and basic
operating methods for the camera.
Learn about the
camera
Current viewing area
Searches can be performed from
the search history.
History
Messages from the camera can
be viewed.
To control panorama image playback
Message
Zoom in/Zoom out: Press the A button to
pause playback. Then turn the zoom lever
to enlarge/shrink the image.
Playback direction: Press the A button to
pause playback. Then press FGHI
to scroll the image in the direction of the
pressed button.
2
Use FG to select the desired item
and press the A button to set.
IN-CAMERA MANUAL
Pause: Press the A button.
Restart scrolling: Press the A button.
Stop playback: Press the m button.
Search
Learn about the camera
History
Message
EXIT
OK
SET
● Follow the on-screen instructions to search the
desired contents.
20 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Shooting Modes
To change the shooting mode
Using the best mode for the
shooting scene (s mode)
The shooting mode (P, M, s, P,
A, Q) can be changed with using the
function menu. “Using the Menu” (p. 4)
1
Set the shooting mode to s.
SCENE MODE
Shooting with automatic
settings (M mode)
The camera will automatically select the optimal
shooting mode for the scene. This is a fully
automatic mode that allows you to take a picture
suited to the scene by simply pressing the
shutter button. In M mode, settings in the
shooting menu can be selected, but the changed
setting is not reflected in the actual shot.
0.0
WB
AUTO
14M
4
2
3
Press G to go to the submenu.
1
Set the shooting mode to M.
PORTRAIT
The icon changes depending on the scene
that the camera automatically selects.
0.0
WB
AUTO
14M
4
Use HI to select the mode and
then press the A button to set.
00:34
14M
4
NORM
In some cases, the camera may not select
the desired shooting mode.
When the camera cannot identify the
optimal mode, P mode will be selected.
0.0
WB
AUTO
00:34
14M
4
Icon indicating the scene mode
that is set
EN 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Making an overlay image
([ MULTIPLE EXPOSURE] mode)
The method of shooting is the same as
in [b MULTI FIREWORKS] mode. While
shooting settings cannot be changed in [b
MULTI FIREWORKS], it is possible to do so
In s modes, the optimum shooting
settings are pre-programmed for specific
shooting scenes. For this reason, settings
may not be changed in some modes.
0
Option
Application
BPORTRAIT/FLANDSCAPE/
in [
MULTIPLE EXPOSURE].
0
GNIGHT SCENE*1/
NIGHT+PORTRAIT /
*1
M
Taking pictures with blurred
backgrounds ([1 SOFT
CSPORT/NINDOOR/
WCANDLE*1/
The camera
R
S
SELF PORTRAIT/
SUNSET /XFIREWORKS / using the
takes a picture
BACKGROUND SHOT] mode)
*1
*1
1Use FG to select [1 SOFT
BACKGROUND SHOT], and press the A
button to set.
b MULTI FIREWORKS/
optimum settings
for the scene
conditions.
0 MULTIPLE EXPOSURE/
V
CUISINE/dDOCUMENTS/
qBEACH & SNOW/
z BIRD WATCHING/
1 SOFT BACKGROUND SHOT/
PET
2Use HI to select a frame (6 different
types are available/AUTO), and then
press the A button.
● AUTO recognizes the subject (people,
flowers, etc) automatically and blurs the
background for shooting.
*1
When the subject is dark, noise reduction is
automatically activated. This approximately doubles
the shooting time during which no other pictures can
be taken.
3Shoot the subject within the frame.
● The frame can be moved by pressing
FGHI.
Making an overlay image with
fireworks
([b MULTI FIREWORKS] mode)
To take pictures of a moving subject
like a pet ([ PET] mode)
1Use HI to select [b MULTI
FIREWORKS], and press the A button to
set.
1Use HI to select [ PET], and press
the A button to set.
2Hold the camera to align the AF target
mark on the subject and press the A
button.
2Press the shutter button to take the first
frame.
● The exposure is locked at the first frame. The
saved image is displayed as the background.
● When the camera recognizes the subject,
the AF target mark automatically tracks the
subject movement to focus on it continuously.
“To focus on a moving subject continuously
(AF Tracking)” (p. 31).
To retake the first shot, press the A button,
and then press the shutter button again.
3Adjust the position of the fireworks that
will be taken in the second frame over the
first frame used as the background, and
then press the shutter button.
● The overlay image is saved as a separate
image from the first and second frames.
To retake the second shot, press the shutter
button again.
22 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting with special effects
Creating panoramic images
(P mode)
(A mode)
To add expression to your photo, select the
desired special effect.
1
Set the shooting mode to A.
1
PANORAMA
Set the shooting mode to P.
AUTO
0.0
MAGIC FILTER
WB
AUTO
0.0
14M
4
WB
AUTO
14M
4
2
3
Press G to go to the submenu.
2
3
Press G to go to the submenu.
Use HI to select the desired mode
and then press the A button to set.
POP ART
Submenu 1
Application
Three frames are taken and
combined by the camera. The
user only composes the shots
so that the target marks and
pointers overlap, and the camera
automatically releases the shutter.
0.0
AUTO
WB
AUTO
Three frames are taken and
combined by the camera. The
user composes the shots using
the guide frame and manually
releases the shutter.
MANUAL
PC
Use HI to select the desired effect
and then press the A button to set.
The frames that were taken are
combined into a panorama image
using the PC software (ib).
For details on installing the PC software
(ib), see “Battery charge and camera setup”
(p. 11).
0.0
WB
AUTO
00:34
When set to [AUTO] or [MANUAL], [IMAGE
SIZE] (p. 30) is fixed to [2].
14M
4
Icon indicating P mode that
The focus, exposure (p. 27), zoom position
(p. 16), and white balance (p. 28) are locked
at the first frame.
is set
Shooting mode
Option
[POP ART
\PIN HOLE
]FISH EYE
@DRAWING
The flash (p. 26) is fixed to $(FLASH OFF)
mode.
MAGIC FILTER
In P mode, the optimum shooting
settings are pre-programmed for each
scene effect. For this reason, some settings
cannot be changed in some modes.
EN 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures with [AUTO]
Taking pictures with [MANUAL]
1Press the shutter button to take the first
1Use HI to specify at which edge the
frame.
next picture is to be connected.
2Move the camera slightly in the direction
of the second frame.
MANUAL
Direction for
combining the
next frame
AUTO
1
2
Target mark
MENU
BACK
Pointer
MENU
OK
SAVE
CANCEL
2Press the shutter button to take the first
frame.
Screen when combining images
from left to right
Joint areas
3Move the camera slowly while keeping it
straight, and stop the camera where the
pointer and target mark overlap.
MANUAL
MANUAL
● The camera releases the shutter
automatically.
1
2
1
2
MENU
MENU
OK
SAVE
BACK
CANCEL
AUTO
1st frame
3Compose the next shot so that joint area
1 overlaps joint area 2.
MENU
OK
SAVE
CANCEL
MANUAL
To combine only two pictures, press the
A button before taking a third frame.
1
2
4Repeat Step 3to take a third frame.
MENU
OK
SAVE
CANCEL
● After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
Composition of the 2nd frame
4Press the shutter button to take the next
shot.
To exit the panorama function without
saving an image, press the m button.
To combine only two pictures, press the
A button before taking the third frame.
If the shutter does not automatically release,
try [MANUAL] or [PC].
5Repeat Steps 3and 4to take a third
frame.
● After the third frame is taken, the camera
automatically processes the frames and the
combined panorama image is displayed.
To exit the panorama function without
saving an image, press the m button.
24 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking pictures with [PC]
Smoothing out skin tone and
texture (Q mode)
1Use FGHI to select the direction that
the frames are combined.
The camera identifies a person’s face and gives
the skin a smooth, translucent look for taking
the picture.
2Press the shutter button to take the first
frame, and then compose the second
shot.
1
Set the shooting mode to Q.
Before first
shot
PC
BEAUTY
P
1
2
0.0
WB
AUTO
MENU
BACK
14M
4
2
Point the camera toward the
After first
shot
subject. Check the frame appearing
around the face detected by the
camera, and then press the shutter
button to take the picture.
PC
1
2
● The unedited image and edited image are both
saved.
● If the image cannot be retouched, only the
unedited image is saved.
MENU
EXIT
The frame may not appear or may take
some time to appear for some subjects. In
addition, this function may have no visible
effect on some subjects.
● After the first shot, the area shown in white
reappears on the side of the display opposite
the pan direction. Frame subsequent
photographs so that they overlap with the
image in the monitor.
The [IMAGE SIZE] of the retouched image
3Repeat Step 2until the number of
desired frames is taken, and then press
the A button or m button when
finished.
is limited to [n] or lower.
Panorama shooting is possible for up to
10 frames.
Refer to the PC software (ib) help guide for
details on how to make panorama images.
EN 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Shooting Functions
“Using the Menu” (p. 4)
3
Use HI to select the setting
option, and press the A button to
set.
Using the flash
The flash functions can be selected to best
match the shooting conditions.
Option
Description
The flash fires automatically in
low-light or backlight conditions.
FLASH AUTO
1
Lift the flash knob to flip up the
built-in flash.
Pre-flashes are emitted to reduce
the occurrence of red eye in your
photos.
REDEYE
FILL IN
Flash knob
The flash fires regardless of the
available light.
After the pre-flashes that reduce
the red eye, the flash fires
regardless of the available light.
RED-EYE +
FILL-IN
The flash fires at a slow shutter
speed immediately after the
shutter is opened (first curtain
sync). Both the subject in the
foreground and the night scene in
the background are captured.
SLOW
The flash settings cannot be adjusted with
the flash closed.
FLASH OFF
The flash does not fire.
To turn off the flash
Press the flash down back into the camera.
This sets to $(FLASH OFF) mode.
Shooting closeups
(Macro shooting)
2
Select the flash option in the
shooting function menu.
This function enables the camera to focus and
shoot subjects at close distances.
P
1
Select the macro option in the
shooting function menu.
FLASH AUTO
0.0
WB
P
AUTO
ISO
AUTO
OFF
14M
4
0.0
WB
AUTO
ISO
AUTO
14M
4
26 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2
Use HI to select the setting
option, and press the A button to
set.
Use HI to select the setting
option, and press the A button to
set.
Option
Description
Option
Description
OFF
Macro mode is deactivated.
The self-timer is deactivated.
YOFF
This enables shooting as close as
10 cm/3.9 in.*1 (180 cm/70.8 in.*2)
to the subject.
The self-timer lamp turns on for
approx. 10 seconds, then blinks
for approx. 2 seconds, and then
the picture is taken.
MACRO
Y12 SEC
This enables shooting as close as
1 cm/0.4 in. to the subject.
SUPER MACRO*3
The self-timer lamp blinks for
approx. 2 seconds, then the
picture is taken.
Y2 SEC
*1
*2
*3
When the zoom is at the widest (W) position.
When the zoom is at the most telephoto (T) position.
The zoom is automatically fixed.
Self-timer shooting is automatically canceled
after one shot.
The flash (p. 26) and zoom (p. 16) cannot
be set when [a SUPER MACRO] is
selected.
To cancel the self-timer after it starts
Press the m button.
Using the self-timer
Adjusting the brightness
(Exposure compensation)
After the shutter button is pressed all the way
down, the picture is taken after a short delay.
The standard brightness (appropriate exposure)
set by the camera based on the shooting mode
(except for M) can be adjusted brighter or
darker to obtain a desired shot.
1
Select the self-timer option in the
shooting function menu.
P
1
Select the exposure compensation
option in the shooting function
menu.
OFF
2
12
0.0
WB
AUTO
ISO
AUTO
P
0.0
14M
4
0.3 0.0 0.3
WB
AUTO
ISO
AUTO
2
Use HI to select the desired
brightness, and press the A button.
EN 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting to a natural color
scheme (White balance)
Selecting the ISO sensitivity
Abbreviation for the International
For more natural coloring, choose a white
balance option suited to the scene.
Organization for Standardization. ISO
standards specify the sensitivity for digital
cameras and film, thus codes such as “ISO
100” are used to represent sensitivity.
1
Select the white balance option in
the shooting function menu.
In the ISO setting, although smaller values
result in less sensitivity, sharp images can
be taken under fully lit conditions. Larger
values result in higher sensitivity, and
images can be taken at fast shutter speeds
even under low light conditions. However,
high sensitivity introduces noise into the
resulting picture, which may give it a grainy
appearance.
P
WB AUTO
0.0
WB
AUTO
ISO
AUTO
1
Select the ISO setting option in the
shooting function menu.
2
Use HI to select the setting
option, and press the A button to
set.
P
Option
Description
0.0
WB
The camera automatically adjusts
the white balance according to the
shooting scene.
AUTO
ISO
1100
ISO
200
ISO
ISO 200
WB AUTO
400
1/400 F2.8
For shooting outdoors under a
clear sky.
5
3
1
For shooting outdoors under a
cloudy sky.
2
Use HI to select the setting
option, and press the A button to
For shooting under tungsten
lighting.
set.
For shooting under daylight
fluorescent lighting (household
lighting, etc.)
Option
Description
w
The camera automatically adjusts
the sensitivity according to the
shooting scene.
ISO AUTO
For shooting under neutral
fluorescent lighting (desk lamps,
etc.)
x
y
The camera uses a higher
sensitivity compared to
For shooting under white
fluorescent lighting (offices, etc.)
HIGH ISO AUTO [ISO AUTO] to minimize blur
caused by a moving subject or by
camera shake.
The ISO sensitivity is fixed to the
selected value.
Value
28 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Timelapse shooting
Sequential shooting (Drive)
Once the shutter button is pressed, the first
shot will be taken, and subsequently all
other shots will be taken automatically. The
camera automatically enters sleep mode
after the first frame has been saved. Sleep
mode is exited around 7 seconds before the
next shot. Once the preset number of frames
is taken, the camera automatically turns off.
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
P
Use of charged batteries or an AC adapter
is recommended when taking frames over
an extended period of time.
0.0
WB
If any of the following operations are
performed while the camera is in sleep
mode, the camera cancels timelapse mode
and returns to normal shooting: opening
of the battery/card compartment cover,
connecting the camera to a computer,
pressing the shutter button or wheel
controller.
AUTO
ISO
AUTO
SEQUENTIAL
Option
Description
One frame is shot each time the
shutter button is pressed.
o
If the internal memory or card or the battery
power runs out during timelapse mode, a
warning is displayed, [TIMELAPSE] mode
is canceled and the camera automatically
turns off.
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the first frame.
j*1
The camera takes sequential shots
at a faster speed than in [j].
c
d
B
i
The camera takes sequential shots
at approximately 10.2 frames/sec.
The camera takes sequential shots
at approximately 15.2 frames/sec.
Sequential shooting while
adjusting the focus for each image.
Sequential shooting that
automatically changes the
exposure for each frame while
using the focus and white balance
that were locked at the first frame
(Bracket shooting). “7” (p. 33)
7
The camera takes sequential
shots automatically for the number
of pictures and interval specified.
“SET TIME LAPSE” (p. 34)
TIMELAPSE
*1
The shooting speed varies depending on the
settings for “image quality” (p. 30).
When set to [j], the flash (p.26) cannot
be set to [REDEYE]. In addition, when set
to [c], [d] or [B] the flash is fixed to
[FLASH OFF].
[IMAGE SIZE] is limited to [n] or lower
when set to [c] or [d], and to [2] or
lower when set to [B]. The ISO sensitivity
is fixed at [ISO AUTO] in both cases.
Setting of recording sound when shooting
still images (R) is disabled when taking
sequential shots.
EN 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Menus for Shooting Functions
The default settings of the function are highlighted in
.
Selecting the image quality for still images [IMAGE SIZE/COMPRESSION]
I (Shooting menu 1) X IMAGE SIZE/COMPRESSION
M s P A Q
Available shooting modes:P
Submenu 1
Submenu 2
Application
14M (4288 × 3216) Suitable for printing pictures over A3 (11×17 in.).
8M (3264×2448)
5M (2560×1920)
3M (2048×1536)
2M (1600×1200)
1M (1280×960)
Suitable for printing pictures up to A3 (11×17 in.).
Suitable for printing pictures at A4 (8.5×11 in.).
Suitable for printing pictures up to A4 size (8.5×11 in.).
Suitable for printing pictures at A5 (5×7 in.).
Suitable for printing pictures at postcard size.
IMAGE SIZE
Suitable for viewing pictures on a TV or using pictures on emails and
web sites.
VGA (640×480)
Suitable for playing pictures on a widescreen TV and for printing on A3
or 11×17 in.
16:9G (4288×2416)
16:9F (1920×1080)
Suitable for playing pictures on a widescreen TV and for printing on A5
or 5×7 in.
FINE
Shooting at high quality.
COMPRESSION
NORMAL
Shooting at normal quality.
“Number of storable pictures (still images)/Remaining recording time (movies) in the internal memory
and SD/SDHC memory cards” (p. 61)
Selecting the image quality for movies [IMAGE SIZE/IMAGE QUALITY]
A (Movie menu) X IMAGE SIZE/IMAGE QUALITY
M s P A Q
Available shooting modes:P
Submenu 1
Submenu 2
720P
Application
IMAGE SIZE
VGA (640×480)
QVGA (320×240)
Select the image quality based on the image size and frame rate.
Select [FINE] to shoot with higher image quality.
IMAGE QUALITY FINE/NORMAL
When [IMAGE SIZE] is set to [QVGA], [IMAGE QUALITY] is fixed to [FINE].
“Number of storable pictures (still images)/Remaining recording time (movies) in the internal memory
and SD/SDHC memory cards” (p. 61)
30 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
To focus on a moving subject
continuously (AF Tracking)
Brightening the subject against
backlight [SHADOW ADJUST]
1Hold the camera to align the AF target
mark on the subject and press the
A button.
I (Shooting menu 1) X SHADOW ADJUST
M s P
Available shooting modes:P
Submenu 2
AUTO
A Q
2When the camera recognizes the subject,
the AF target mark automatically tracks
the subject movement to focus on it
continuously.
Application
The shadow adjustment effect is
applied when shooting against
backlight.
3To cancel the tracking, press the
A button.
OFF
ON
The effect is not applied.
Shoot with automatic adjustment
to brighten an area that has
become darker.
Depending on the subjects or the shooting
conditions, the camera may be unable to
lock the focus or fail to track the subject
movement.
When set to [ON], [ESP/n] (p. 32) is
automatically fixed to [ESP].
When the camera fails to track the subject
movement, the AF target mark changes to
red.
Selecting the focusing area [AF MODE]
I (Shooting menu 1) X AF MODE
When set to [ON], [ESP/n] (p. 32) is
automatically fixed to [ESP].
M s P
Available shooting modes:P
A Q
To move and lock the AF target mark
[AREA]
Submenu 2
Application
The camera focuses automatically.
(If a face is detected, it is shown
by a white frame*1; when the
shutter button is pressed halfway
and the camera focuses, the
frame turns to green*2. If no face is
detected, the camera chooses a
subject in the frame and focuses
automatically.)
Use FGHI to move the AF target mark
(V) on the screen. To lock the AF target
mark, press and hold the A button until the
mark changes to R. To unlock the AF target
mark, press and hold the A button until the
mark changes to V.
FACE/iESP*1
The camera focuses on the
subject located within the AF
target mark.
SPOT
The camera tracks the subject
movement automatically to focus
on it continuously.
AF TRACKING
The AF target mark position is
moved to focus the camera on the
subject located at a position other
than the center.
AREA
*1
*2
For some subjects, the frame may not appear or
may take some time to appear.
If the frame blinks in red, the camera cannot focus.
Try refocusing on the subject.
EN 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the method for measuring
the brightness [ESP/n]
Shooting at higher magnifications than
optical zoom without reducing the
image quality [FINE ZOOM]
I (Shooting menu 1) X ESP/n
M s P
I (Shooting menu 1) X FINE ZOOM
Available shooting modes:P
A Q
M s P
Available shooting modes:P
Submenu 2
OFF
A Q
Submenu 2
Application
Application
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the
center and surrounding areas of
the screen separately).
Optical zoom is used to zoom in
for shooting.
ESP
Optical zoom and image cropping
are combined to zoom in for
ON
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
shooting. (Approx. 201x (max.))
5 (spot)
This function will not reduce the image
quality since it dose not convert the data
with fewer pixels into the data with larger
pixels.
Shoots without being affected
by the surrounding brightness.
(Meters a wide range based on the
center section of the screen.)
(center
weighted)
E
When set to [ON], [IMAGE SIZE] is limited
to [4] or lower.
When set to [ESP], the center may
appear dark when shooting against strong
backlighting.
The setting is not available when [DIGITAL
ZOOM] is set to [ON].
[FINE ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
[5(spot)] can be selected when [SHADOW
ADJUST] is set to [OFF], or when [AF
MODE] is set to [SPOT].
Shooting at higher magnifications than
optical zoom [DIGITAL ZOOM]
I (Shooting menu 1) X DIGITAL ZOOM
M s P
Available shooting modes:P
Submenu 2
OFF
A Q
Application
Only optical zoom is used to zoom
in for shooting.
Optical zoom and digital zoom
are combined to zoom in for
shooting.(Approx. 150x (max.))
ON
The setting is not available when [FINE
ZOOM] is set to [ON].
[DIGITAL ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
32 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Recording sound when shooting still
images [R]
Reducing the blur caused by the
camera shake when shooting
[IMAGE STABILIZER] (still images)/
[IS MOVIE MODE] (movies)
J (Shooting menu 2) X R
M s P
Available shooting modes:P
A Q
J (Shooting menu 2) X
IMAGE STABILIZER (still images)/
A (Movie menu) X
Submenu 2
OFF
Application
No sound is recorded.
IS MOVIE MODE (movies)
The camera automatically starts
recording sound for approx.
M s P
Available shooting modes:P
ON
4 seconds after a picture is taken.
This is useful for recording notes
or comments about the picture.
A Q
Submenu 2
Application
The image stabilizer is
deactivated. This is recommended
for shooting when the camera is
fixed in place on a tripod or other
stable surface.
When recording, aim the microphone (p. 6)
at the source of the sound you want to
record.
OFF
Setting is disabled when taking sequential
shots.
ON
The image stabilizer is activated.
The camera’s default settings are [IMAGE
STABILIZER] (still images) to [ON] and [IS
MOVIE MODE] (movies) to [OFF].
Recording sound when shooting
movies [R]
There may be a noise coming from inside
the camera when the shutter button is
pressed with [IMAGE STABILIZER] (still
images) set to [ON].
A (Movie menu) X R
Available shooting modes:P
M s P
A Q
Submenu 2
OFF
ON
Application
Images may not be stabilized if camera
shake is too severe.
No sound is recorded.
Sound is recorded.
When the shutter speed is extremely slow,
such as when taking pictures at night,
[IMAGE STABILIZER] (still images) may not
be as effective.
When set to [ON], only the digital zoom can
be used during movie recording. To record
the movie with the optical zoom, set [R]
(movies) to [OFF].
When shooting while the [IS MOVIE MODE]
(movies) is set to [ON], the image will be
enlarged somewhat before saving.
Specifying the exposure compensation
and number of pictures [7]
J (Shooting menu 2) X 7
M s P
Available shooting modes:P
A Q
Submenu 2
Application
EXPOSURE
COMP.
Set the exposure
difference and the
number of shots.
±0.3/±0.7/±1.0
x3/x5
PICTURES
1Use FG to select [EXPOSURE COMP.]
(±0.3/±0.7/±1.0), and press the I.
2Use FG to select [PICTURES] (x3/x5), and
press the A button.
EN 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Reducing noise during long exposures
[NOISE REDUCT.]
Using the AF illuminator to focus on a
shadowy subject [AF ILLUMINAT.]
J (Shooting menu 2) X NOISE REDUCT.
J (Shooting menu 2) X AF ILLUMINAT.
M s P
M s P
Available shooting modes:P
Available shooting modes:P
A Q
A Q
Submenu 2
Application
Submenu 2
OFF
Application
The AF illuminator is not used.
The camera takes pictures at a fast
shutter speed. No noise reduction is used.
OFF
When the shutter button is pressed
halfway down, the AF illuminator
turns on to aid focusing.
ON
The camera takes pictures at a slow
shutter speed. Noise reduction is
activated when the shutter speed is
slower than 1/2 second.
ON
When set to [ON], the time for saving data is
approx. twice as long as usual. During this wait
time, no pictures can be taken.
AF illuminator
This function may not work effectively for
some subjects and shooting conditions.
Displaying icon guides [ICON GUIDE]
Specifying the shooting interval and
number of pictures [SET TIME LAPSE]
J (Shooting menu 2) X ICON GUIDE
M s P
Available shooting modes:P
A Q
J (Shooting menu 2) X SET TIME LAPSE
M s P
Available shooting modes:P
Submenu 2
OFF
Application
No icon guide is displayed.
A Q
Submenu 2
Application
The explanation of the selected
icon will be displayed when
a shooting mode or shooting
function menu icon is selected
(position the cursor on the icon for
a while to display the explanation).
Set the shooting
interval and the number
of shots.
INTERVAL 1MIN to 99MIN
ON
PICTURES
2 to 99
1Use FG to select [INTERVAL] (1 to 99
MIN), and press the I.
PROGRAM AUTO
P
2Use FG to select [PICTURES] (2 to 99),
Functions can be changed
manually.
and press the A button.
Icon guide
0.0
Shooting pictures while keeping the
subject in focus [FULLTIME AF]
WB
AUTO
ISO
AUTO
A (Movie menu) X FULLTIME AF
14M
4
M s P
Available shooting modes:P
A Q
Submenu 2
OFF
Application
Pressing the shutter button
halfway down brings the subject
into focus and locks the focus.
Fulltime AF keeps the subject in
focus, without having to press the
shutter button down halfway. This
reduces focusing time.
ON
34 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Menus for Playback, Editing, and
Printing Functions
The menu descriptions shall begin with the playback function menu. The default settings of the
function are highlighted in
.
Data must have been created with the PC software (ib) before using some function.
For details on installing the PC software (ib), see “Battery charge and camera setup” (p. 11).
Refer to the PC software (ib) help guide for details on how to use the PC software (ib).
Playing back pictures automatically
[SLIDESHOW]
Searching for images and playing back
the related images [PHOTO SURFING]
SLIDESHOW
PHOTO SURFING
In [PHOTO SURFING], images can be
searched and related images can be played
back by selecting the related items.
Submenu 1 Submenu 2
Application
Selects the content
to be included in the
slideshow.
ALL/EVENT/
SLIDE
COLLECTION
To start [PHOTO SURFING]
Press the A button to start
OFF/
Cosmic/
Breeze/
Mellow/
Dreamy/
Urban
[PHOTO SURFING].
Selects the
background music
options.
When a related item of the image displayed
is selected with FG, images related to the
item are displayed in the lower part of the
monitor. Use HI to display an image.
To select the related items undisplayed,
press the A button when selecting an item.
To stop [PHOTO SURFING], press the
m button, or select [BACK] and press
the A button.
BGM
STANDARD/ Selects the type of
FADE/
ZOOM
TYPE
transition effect used
between slides.
START
―
Starts the slideshow.
Single-frame advance/rewind:
BACK
During a slideshow, press I to skip ahead
one frame or press H to go back one frame.
2010/
02/26
Related items
35ºN
139ºE
Images corresponding the
related items
EN 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing back images by Collection
created with the PC software (ib)
[COLLECTION q]
Viewing images by event [EVENT q]
EVENT q
In [EVENT q], images in an event are
played back. (Images with the same
shooting date are grouped into the same
event.)
COLLECTION q
In [COLLECTION q], the collection is
played back that has been created with the
PC software (ib) and imported back from a
computer.
To start [EVENT q]
Press the A button to start [EVENT q].
(The event, including the image for which
single-image view was being performed
when the playback function menu was
selected, is played back.)
Use HI to advance or rewind by one
frame.
To stop [EVENT q], press the
m button.
To start [COLLECTION q]
Press the A button, and then use FGHI
to select the desired collection. Press the
A button again to start playback of the
selected collection. Use HI to advance or
rewind by one frame.
To stop [COLLECTION q], press the
m button.
4/30
COLLECTION
MENU
EXIT
OK
PLAY
’10/02/26 12:30
MENU
OK
SET
BACK
36 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Using a PC software (ib) and importing
data back to the camera
Retouching the skin and eyes
[BEAUTY FIX]
The following functions can be performed
BEAUTY FIX
when data created with the PC software (ib)
is imported back to the camera.
Depending on the picture, the editing may
not be effective.
Refer to the PC software (ib) help guide for
details on how to use the PC software (ib).
Submenu 1 Submenu 2
Application
[PHOTO SURFING]
[CLEAR SKIN],
[SPARKLE EYE] and
[DRAMATIC EYE] are
applied together.
Information of persons or shooting locations
and new Collections can be added in the
related items.
ALL
―
Makes skin look
smooth and
translucent. Select the
correction effect from
3 levels.
[EVENT q]
Images can be played back by event created
with the PC software (ib).
SOFT/AVG/
HARD
CLEAR SKIN
Enhances the contrast
of the eyes.
SPARKLE EYE
―
―
Event index (p. 19)
The representative images for an event
created with the PC software (ib) can be
displayed.
DRAMATIC
EYE
Enlarges the subject’s
eyes.
1Use FG to select a correction item, and
press the A button.
2Use HI to select an image for
retouching, and press the A button.
● The retouched image is saved as a separate
image.
When [CLEAR SKIN] is selected
Use FG to select the retouching level, and
press the A button.
CLEAR SKIN
SOFT
AVG
HARD
MENU
OK
SET
BACK
EN 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the color tone of image
[COLOR EDIT]
Changing the image size [Q]
EDIT X Q
EDIT X COLOR EDIT
Submenu 2
Application
Submenu 2
Application
This saves a high-resolution image
as a separate image with a smaller
size for use in e-mail attachments
and other applications.
C640 × 480
This changes the image to black
and white.
BLACK & WHITE
E320 × 240
This changes the image to a
sepia tone.
SEPIA
1Use HI to select an image.
HIGH
SATURATION
This increases the color saturation
of the image.
2Use FG to select an image size and
press the A button.
LOW
SATURATION
This slightly increases the color
saturation of the image.
● The resized image is saved as a separate
image.
COLOR EDIT
SEPIA
Cropping image [P]
EDIT X P
1Use HI to select an image, and press
the A button.
2Use the zoom lever to select the size of
the cropping frame, and use FGHI to
move the frame.
MENU
OK
SET
BACK
1Use HI to select an image, and press
the A button.
2Use HI to select the desired color, and
press the A button.
● The image with the selected color is saved as
a separate image.
Cropping frame
Adding a calendar to an image
[CALENDAR]
OK
SET
3Press the A button after you have
selected the area to trim.
EDIT X CALENDAR
● The edited image is saved as a separate
image.
CALENDAR
OK
SET
38 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
1Use HI to select an image, and press
the A button.
Erasing images [ERASE]
ERASE
2Use HI to select a calendar. Use FG
to select the image orientation, and then
press the A button.
Submenu 1
Application
All images in the internal memory
or card will be erased.
ALL ERASE
3Use FG to select the Year of the
calendar, and press I.
Images are individually selected
and erased.
SEL. IMAGE
4Use FG to select the Month of the
ERASE/
Deletes the image displayed.
calendar, and press the A button.
ERASE EVENT*1
● The edited image is saved as a separate
image.
CANCEL
Cancels deletion of the image.
*1
If G is pressed when an event is played back, all
images in the event are erased.
Brightening areas that are dark
due to backlight or other reasons
[SHADOW ADJ]
When erasing pictures in the internal
memory, do not insert the card into the
camera. Or set [INTERNAL/SD] to [IN].
“Selecting a storage device [INTERNAL/
SD]” (p. 41)
EDIT X SHADOW ADJ
1Use HI to select an image, and press
Before erasing pictures from a memory
card, insert the card into the camera and
select [AUTO] for [INTERNAL/SD].
“Selecting a storage device [INTERNAL/
SD]” (p. 41)
the A button.
● The edited image is saved as a separate
image.
Depending on the picture, the editing may
not be effective.
Protected images cannot be erased.
The retouching process may lower the
image resolution.
To individually select and erase
images [SEL. IMAGE]
Retouching red eyes in flash shooting
1Use FG to select [SEL. IMAGE], and
[REDEYE FIX]
press the A button.
2Use HI to select the image to be
erased, and press the A button to add a
R mark to the image.
EDIT X REDEYE FIX
1Use HI to select an image, and press
the A button.
● Turn the zoom lever to the W end to display
an index view. Images can be quickly selected
using the FGHI buttons. Turn to the T
end to return to the single frame display.
● The edited image is saved as a separate
image.
Depending on the picture, the editing may
not be effective.
SEL. IMAGE
The retouching process may lower the
image resolution.
R mark
OK
MENU
ERASE/CANCEL
3Repeat Step 2to select the images to be
erased, and then press the m button
to erase the selected images.
4Use FG to select [YES], and press the
A button.
● The images with a R mark are erased.
EN 39
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all images [ALL ERASE]
Adding sound to still images [R]
1Use FG to select [ALL ERASE], and
press the A button.
2Use FG to select [YES], and press the
q(Playback menu) X R
1Use HI to select an image.
2Aim the microphone toward the sound
source.
A button.
Microphone
Saving print settings to the image data
[PRINT ORDER]
q(Playback menu) X PRINT ORDER
“Print Reservations (DPOF)” (p. 51)
Print reservation can be set only for still
images that are recorded to the card. Set
[INTERNAL/SD] to [AUTO].
Protecting images [0]
q(Playback menu) X 0
Protected images cannot be erased by
[ERASE] (p. 18, 39), [ALL ERASE] (p. 39),
[SEL. IMAGE] (p. 39) or [ERASE EVENT]
(p. 39), but all images are erased by
3Press the A button.
● Recording starts.
● The camera adds (records) sound for approx.
4 seconds while playing back the image.
[MEMORY FORMAT]/[FORMAT] (p. 41).
1Use HI to select an image.
2Press the A button.
● Press the A button again to cancel the
settings.
3If necessary, repeat Steps 1and 2
to protect other images, and press the
m button.
Rotating images [y]
q(Playback menu) X y
1Use HI to select an image.
2Press the A button to rotate the image.
3If necessary, repeat Steps 1and 2to
make settings for other images, and press
the m button.
The new picture orientations will be saved
even after the power is turned off.
40 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Menus for Other Camera Settings
The default settings of the function are highlighted in
.
Selecting a storage device
[INTERNAL/SD]
Restoring data in the camera
[DATA REPAIR]
r (Settings 1) X INTERNAL/SD
r (Settings 1) X DATA REPAIR
Playback will become available by
performing [DATA REPAIR] when images
never appear on the monitor after qbutton
is pressed. However, data such as
collections and other groups created with
the PC software (ib) is deleted from the
database in the camera.
Submenu 2
Application
If a card is inserted, the card is
automatically selected. If no card
is inserted, internal memory is
used.
AUTO
IN*1
Internal memory is selected.
Import the data back into the camera from a
computer to playback the data created with
the PC software (ib).
*1
Internal memory is used even if a card is inserted.
Erasing data completely
[MEMORY FORMAT]/[FORMAT]
Copying images in the internal memory
r (Settings 1) X MEMORY FORMAT/
to the card [u COPY]
FORMAT
r (Settings 1) X u COPY
Before formatting, check that no important
data is left in the internal memory or card.
To copy images in the internal memory
to the card
Use HI to select an image, and press the
If the internal memory is formatted, the
camera instruction manual and the PC
software (ib) data that are stored on the
internal memory are erased. If necessary,
store the backup before formatting.
A button.
Changing the display language [D]
r (Settings 1) X D
Cards must be formatted with this camera
before first use or after being used with
other cameras or computers.
“Changing the display language” (p. 14)
Submenu 2
YES*1
NO
Application
Submenu 2
Application
Completely erases the image data
in the internal memory or card
(including protected images).
The language for the menus and
error messages displayed on the
monitor is selected.
Languages
Cancels formatting.
*1
If [AUTO] is selected for [INTERNAL/SD] and a card
is inserted, the card will be formatted. If no card is
inserted, internal memory will be formatted.
If [IN] is selected for [INTERNAL/SD], internal
memory will be formatted whether a card is inserted
or not.
EN 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring the shooting functions to the
default settings [RESET]
Even if a computer has USB ports, proper
operation is not guaranteed in the following
cases:
r (Settings 1) X RESET
● Computers with USB ports installed using an
expansion card, etc.
Submenu 2
Application
● Computers without a factory-installed OS and
home-built computers
Restores the following menu
functions to the default settings.
• Flash (p. 26)
• Macro (p. 26)
• Self-timer (p. 27)
• Exposure compensation (p. 27)
• White balance (p. 28)
• ISO (p. 28)
Turning on the camera with the q
button [qPOWER ON]
YES
s (Settings 2) X qPOWER ON
• Drive (p. 29)
Submenu 2
YES
Application
I
J
,
• Menu functions in [
,
A
] (p. 30 to 34)
Pressing the qbutton turns on
the camera and starts the camera
in the playback mode.
The current settings will not be
changed.
NO
The camera is not turned on. To
turn on the camera, press the
n button.
NO
Selecting a method for connecting
the camera to other devices
[USB CONNECTION]
Saving the mode when the camera is
turned off [SAVE SETTINGS]
r (Settings 1) X USB CONNECTION
s (Settings 2) X SAVE SETTINGS
Submenu 2
AUTO
Application
When the camera is connected
to another device, the settings
selection screen is displayed.
Submenu 2
Application
The shooting mode is saved
when the camera is turned off and
is reactivated the next time the
camera is turned on.
Select when connecting the
camera to a computer via a
storage device.
YES
STORAGE
The shooting mode is set to P
mode when the camera is turned
on.
Select when connecting a camera
and computer.
PC
NO
Select when connecting to a
PictBridge-compatible printer.
PRINT
Choosing the opening screen display
[PW ON SETUP]
System requirements
Windows
:
Windows 2000 Professional/
XP Home Edition/
s (Settings 2) X PW ON SETUP
XP Professional/Vista/
Windows 7
Macintosh : Mac OS X v10.3 or later
Submenu 2
OFF
Application
No opening screen is displayed.
The opening screen is displayed
when the camera is turned on.
ON
42 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Selecting the camera sound and its volume [SOUND SETTINGS]
s (Settings 2) X SOUND SETTINGS
Submenu 2
Submenu 3
Submenu 4
Application
Select [ON] to disable camera sounds
(operation sounds, shutter sound, and
warning sounds) and mute sound during
playback.
SILENT MODE*1, 2
OFF/ON
—
SOUND TYPE
VOLUME
1/2/3
Selects the operating sound and volume
of the camera buttons (except the shutter
button).
BEEP
OFF (No Sound)/
LOW/HIGH
SOUND TYPE
VOLUME
1/2/3
Selects the type and volume of the shutter
sound.
SHUTTER SOUND
OFF (No Sound)/
LOW/HIGH
OFF (No Sound)/
LOW/HIGH
8
—
—
Selects the warning sound volume.
Selects the image playback volume.
OFF (No Sound) or
5 levels of volume
qVOLUME
*1
Even when [SILENT MODE] is [ON], FG can be used to adjust volume during playback.
Even when [SILENT MODE] is [ON], sound is played when images are displayed on a television.
*2
Resetting the file names of pictures
Submenu 2
Application
[FILE NAME]
This resets the sequential number
for the folder name and file name
whenever a new card is inserted.*1
This is useful when grouping
images on separate cards.
s (Settings 2) X FILE NAME
RESET
Folder name
DCIM
Folder name
100OLYMP
File name
Pmdd0001.jpg
Even when a new card is inserted,
this continues the numbering for
the folder name and file name from
the previous card. This is useful for
managing all image folder names
and files names with sequential
numbers.
AUTO
999OLYMP
Pmdd9999.jpg
*1
The number for the folder name is reset to 100, and
the one for the file name is reset to 0001.
Automatic
numbering
Automatic
numbering
Month: 1 to C
(A=October,
B=November,
C=December)
Pmdd
Day: 01 to 31
EN 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the CCD and the image
processing function [PIXEL MAPPING]
Setting the date and time [X]
t (Settings 3) X X
s (Settings 2) X PIXEL MAPPING
“Setting the date, time and time zone”
(p. 13)
This function has already been adjusted
at factory shipping, and no adjustment is
needed right after purchase. Approximately
once a year is recommended.
To select the date display order
1Press I after setting Minute, and use
FG to select the date display order.
For best results, wait at least one minute
after taking or viewing pictures before
performing pixel mapping. If the camera is
turned off during pixel mapping, be sure to
perform it again.
X
Y
M
D
TIME
Y/M/D
2010.02.26 12:30
To adjust the CCD and the image
processing function
Date order
Press the A button when [START]
(Submenu 2) is displayed.
MENU
OK
SET
CANCEL
● The camera checks and adjusts the CCD and the
image processing function at the same time.
Adjusting the brightness of the monitor
[s]
s (Settings 2) X s
To adjust the monitor brightness
1Use FG to adjust the brightness while
viewing the screen, and then press the
A button.
s
MENU
OK
SET
BACK
44 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
Choosing home and alternate time zones [WORLD TIME]
t (Settings 3) X WORLD TIME
You will not be able to select a time zone using [WORLD TIME] if the camera clock has not first been
set using [X].
Submenu 2
Submenu 3
Application
The time in the home time zone (the time zone selected for x in
submenu 2).
x
y
HOME/ALTERNATE
The time in the travel destination time zone (the time zone selected
for y in submenu 2).
x*1
y*1, 2
—
—
Select the home time zone (x).
Select the travel destination time zone (y).
*1
In areas where daylight saving time is in effect, use FG to turn daylight saving time ([SUMMER]) on.
When you select a time zone, the camera automatically calculates the time difference between the selected
zone and the home time zone (x) to display the time in the travel destination time zone (y).
*2
Playing back images on a TV [TV OUT]
t (Settings 3) X TV OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2
Submenu 3
NTSC
Application
Connecting the camera to a TV in North America, Taiwan, Korea,
Japan, and so on.
VIDEO OUT
Connecting the camera to a TV in European countries, China, and
so on.
PAL
480p,576p/720p/
1080i
HDMI OUT
Set the playback format.
Operate with the camera.
OFF
ON
HDMI CONTROL
Operate with the TV remote control.
The factory default settings differ according to the region where the camera is sold.
EN 45
Download from Www.Somanuals.com. All Manuals Search And Download.
To play back camera images on a TV
● Connection via AV cable
1Use the camera to select the same video signal system as the one of connected TV
([NTSC]/[PAL]).
2Connect the TV and camera.
Open the connector cover
in the direction of the arrow.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
Multi-
connector
AV cable (supplied)
● Connection via HDMI cable
1On the camera, select the digital signal format that will be connected ([480p,576p]/[720p]/
[1080i]).
2Connect the TV and camera.
When set to [1080i], “1080i” format takes priority for HDMI output. However, if this setting does not
match the input setting of the TV, the signal format is changed first to “720p” and then to “480p,576p”.
For details on changing the input setting of the TV, refer to the TV’s instruction manual.
When the camera is connected to the computer or the like by the USB cable, do not connect the
HDMI cable to the camera.
Open the connector cover
in the direction of the arrow.
HDMI micro
Connect to the HDMI
connector
connector on the TV.
HDMI cable (type D/sold separately: CB-HD1)
3Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
4Turn on the camera, and use HI to select the image for playback.
For details on changing the input source of the TV, refer to the TV’s instruction manual.
Use an HDMI cable that matches the HDMI micro connector on the camera and the HDMI connector on
the TV.
When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable
will take priority.
Depending on the TV’s settings, the displayed images and information may become cropped.
46 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
For information on using the menus, see “Using the Menu” (p. 4).
To operate images with the TV remote
control
Viewing the image immediately after
shooting [REC VIEW]
t (Settings 3) X REC VIEW
1Set [HDMI CONTROL] to [ON], and turn
off the camera.
Submenu 2
Application
2Connect the camera and TV with an
HDMI cable. “Connection via HDMI cable”
(p. 46)
The image being recorded is not
displayed. This allows the user
to prepare for the next shot while
following the subject in the monitor
after shooting.
OFF
3First turn on the TV, and then turn on the
camera.
● Operate by following the operation guide that
The image being recorded is
displayed. This allows the user to
make a brief check of the image
that was just taken.
is displayed on the TV.
ON
With some TVs, operations cannot be
performed with the TV remote control even
though the operation guide is displayed on
the screen.
Even when set to [ON], you can resume
shooting while the image is being displayed.
If operations cannot be performed with the
TV remote control, set [HDMI CONTROL] to
[OFF] and operate using the camera.
Automatically rotating images shot
with the camera in a vertical position
during playback [PIC ORIENTATION]
Saving battery power between shots
[POWER SAVE]
t (Settings 3) X PIC ORIENTATION
t (Settings 3) X POWER SAVE
During shooting, the [y] (p. 40) setting on
the playback menu is set automatically.
Submenu 2
OFF
Application
This function may not work properly if
the camera is facing up or down during
shooting.
Cancels [POWER SAVE].
When the camera is not being
used for approx. 10 seconds, the
monitor automatically turns off to
save battery power.
ON
Submenu 2
Application
Information about the vertical/
horizontal orientation of the
camera during shooting is not
recorded with images. Images
shot with the camera in a vertical
position are not rotated during
playback.
To resume standby mode
Press any button.
OFF
Information about the vertical/
horizontal orientation of the
camera during shooting is
recorded with images. Images
are automatically rotated during
playback.
ON
EN 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing
Direct printing (PictBridge*1)
2
Turn on the printer, and then
connect the printer and camera.
By connecting the camera to a PictBridge-
compatible printer, you can print images directly
without using a computer.
Open the connector cover
in the direction of the arrow.
To find out if your printer supports PictBridge,
refer to the printer’s instruction manual.
Multi-
connector
*1
PictBridge is a standard for connecting digital
cameras and printers of different makers and
printing out pictures directly.
USB cable
(supplied)
The printing modes, paper sizes, and other
parameters that can be set with the camera
vary depending on the printer that is used.
For details, refer to the printer’s instruction
manual.
For details on the available paper types,
loading paper, and installing ink cassettes,
refer to the printer’s instruction manual.
Printing images at the
printer’s standard settings
[EASY PRINT]
EASYPRINT START
CUSTOM PRINT OK
In the [SETUP] menu, set [USB
CONNECTION] to [PRINT]. “Using the
Menu” (p. 4)
1
Display the image to be printed on
the monitor.
3
4
Press I to start printing.
To print another image, use HI
to select an image, and press the
A button.
“Viewing images” (p. 17)
To exit printing
After a selected image is displayed on the
screen, disconnect the USB cable from the
camera and printer.
OK
PRINT
EXIT
48 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the printer’s settings
for printing [CUSTOM PRINT]
5
Use FG to select the
[BORDERLESS] or [PICS/SHEET]
settings, and press the A button.
1
Follow Steps 1 and 2 for [EASY
PRINT] (p. 48).
Submenu 4
(BORDERLESS
Application
or PICS/SHEET)
2
3
Press the A button.
The image is printed with a border
around it ([OFF]).
The image is printed to fill the
entire paper ([ON]).
OFF/ON*1
Use FG to select the print mode,
and press the A button.
(The number of The number of images per sheet
images per sheet ([PICS/SHEET]) is selectable only
varies depending when [MULTI PRINT] is selected
PRINT MODE SELECT
PRINT
on the printer.)
in Step 3.
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
*1
The available settings for [BORDERLESS] vary
depending on the printer.
If [STANDARD] is selected in Steps 4 and 5,
the image is printed at the printer’s standard
settings.
MENU
OK
SET
EXIT
4/30
Submenu 2
Application
This prints the image selected in
Step 6.
PRINT
14M
NORM
This prints all images stored in the
internal memory or card.
ALL PRINT
MULTI PRINT
FILE
100 0004
’10/02/26 12:30
This prints one image in a multiple
layout format.
OK
PRINT
MORE
SINGLE PRINT
This prints an index of all images
stored in the internal memory
or card.
ALL INDEX
6
7
Use HI to select an image.
This prints images based on the
print reservation data on the card.
PRINT ORDER*1
Press F to make a print reservation
for the current image. Press G to
make the detailed printer settings
for the current image.
*1
[PRINT ORDER] is available only when print
reservations have been made. “Print Reservations
(DPOF)” (p. 51)
4
Use FG to select [SIZE] (Submenu
3), and press I.
To make the detailed printer settings
1Use FGHI to select the setting, and
If the [PRINTPAPER] screen is not
displayed, the [SIZE], [BORDERLESS],
and [PICS/SHEET] are set to the printer’s
standard.
press the A button.
PRINT INFO
<x
1
PRINTPAPER
DATE
FILE NAME
P
WITHOUT
WITHOUT
SIZE
BORDERLESS
STANDARD
STANDARD
MENU
OK
EXIT
SET
MENU
OK
SET
BACK
EN 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Submenu Submenu
9
Press the A button.
Application
5
6
This selects the number
of prints.
PRINT
<×
0 to 10
Selecting [WITH] prints the
images with the date.
Selecting [WITHOUT]
prints the images without
the date.
PRINT
WITH/
WITHOUT
CANCEL
DATE
Selecting [WITH] prints the
file name on the image.
Selecting [WITHOUT] does
not print any file name on
the image.
MENU
OK
SET
BACK
WITH/
WITHOUT
FILE NAME
10
Use FG to select [PRINT], and
press the A button.
● Printing starts.
(Proceeds
to the
setting
This selects a portion of
the image for printing.
P
● When [OPTION SET] is selected in [ALL PRINT]
mode, [PRINT INFO] screen is displayed.
screen.)
● When printing is finished, the [PRINT MODE
SELECT] screen is displayed.
To crop an image [P]
1Use the zoom lever to select the size
of the cropping frame, use FGHI
to move the frame, and then press the
A button.
PRINT MODE SELECT
PRINT
ALL PRINT
MULTI PRINT
ALL INDEX
PRINT ORDER
MENU
OK
SET
EXIT
Cropping frame
To cancel printing
1Press the m button while
OK
SET
[DO NOT REMOVE USB CABLE] is
displayed.
2Use FG to select [OK], and press the
A button.
2Select [CANCEL] using FG and then
press the A button.
P
OK
DO NOT REMOVE USB CABLE
CANCEL
MENU
CANCEL
MENU
OK
SET
BACK
CONTINUE
CANCEL
8
If necessary, repeat Steps 6 and 7
to select the image to be printed,
OK
SET
make the detailed settings, and set
[SINGLEPRINT].
50 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
3
4
Press the m button.
Use FG to select [<], and press
the A button.
When the message [REMOVE USB
CABLE] is displayed, disconnect
the USB cable from the camera and
printer.
4/30
0
14M
NORM
Print Reservations (DPOF*1)
FILE
100 0004
’10/02/26 12:30
OK
SET
In print reservations, the number of prints and
date imprint option are saved in the image on
the card. This enables easy printing at a printer
or print shop supporting DPOF by using only the
print reservations on the card without a computer
or a camera.
Use HI to select the image for
print reservation. Use FG to select
the quantity. Press the A button.
*1
DPOF is a standard for storing automatic printout
X
information from digital cameras.
Print reservations can be set only for the
images stored on the card. Insert a card
with recorded images before making print
reservations.
NO
DATE
TIME
DPOF reservations set by another DPOF
device cannot be changed by this camera.
Make changes using the original device.
Making new DPOF reservations with this
camera will erase the reservations made by
the other device.
MENU
OK
SET
BACK
5
Use FG to select the [X] (date
print) screen option, and press the
DPOF print reservations can be made for up
to 999 images per card.
A button.
Submenu 2
Application
NO
This prints the image only.
Single-frame print
This prints the image with the
shooting date.
reservations [<]
DATE
This prints the image with the
shooting time.
TIME
1
Display the [SETUP] menu.
“Using the Menu” (p. 4)
PRINT ORDER
2
From the playback menu q, select
[PRINT ORDER] and then press the
(
)
1
1
A button.
SET
PRINT ORDER
CANCEL
MENU
OK
SET
BACK
<
U
6
Use FG to select [SET], and press
the A button.
MENU
OK
SET
EXIT
EN 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Reserving one print each of all
Resetting the print reservation
data for selected images
images on the card [U]
1
1
Follow Steps 1 and 2 in [<] (p. 51).
Follow Steps 1 and 2 in [<] (p. 51).
2
2
3
4
Use FG to select [U], and press
Use FG to select [<], and press
the A button.
the A button.
3
Follow Steps 5 and 6 in [<].
Use FG to select [KEEP] and
press the A button.
Resetting all print reservation
data
Use HI to select the image with
the print reservation you want to
cancel. Use FG to set the print
quantity to “0”.
1
Follow Steps 1 and 2 in [<] (p. 51).
2
5
6
Select either [<] or [U], and press
If necessary, repeat Step 4, and then
press the A button when finished.
the A button.
PRINT ORDER SETTING
PRINT ORDERED
Use FG to select the [X] (date
print) screen option, and press the
A button.
● The settings are applied to the remaining images
with the print reservation data.
RESET
KEEP
MENU
OK
SET
BACK
7
Use FG to select [SET], and press
the A button.
3
Use FG to select [RESET], and
press the A button.
52 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Usage Tips
If the camera does not work as intended, or if
an error message is displayed on the screen,
and you are unsure of what to do, refer to the
information below to fix the problem(s).
Monitor
“Difficult to see”.
● Condensation*1 may have occurred. Turn off the
power, and wait for the camera body to become
acclimated to the surrounding temperature and dry
out before taking pictures.
Troubleshooting
*1
Dew drops can form in the camera when it is
suddenly taken from a cold location into a warm,
humid room.
Battery
“The camera does not work even when
batteries are installed”.
“Vertical lines appear on the screen”.
● This condition may occur when the camera is
pointed at an extremely bright subject under a
clear sky and so on. The lines do not appear,
however, in the final image.
● Insert recharged batteries in the correct direction.
“Inserting the battery” (p. 10)
● Battery performance may have been reduced
temporarily due to low temperature. Take the
batteries out of the camera, and warm them by
putting them in your pocket for a while.
“The light is caught in the picture”.
● Shooting with flash in dark situations results in
an image with many flash reflections on dust in
the air.
Card/Internal memory
“An error message is displayed”.
“Error message” (p. 54)
Date and time function
“Date and time settings return to the
default setting”.
Shutter button
● If the batteries are removed and left out of the
camera for about 3 days*2, the date and time
settings return to the default setting, and must
be reset.
“No picture is taken when the shutter
button is pressed”.
● Cancel sleep mode.
*2
The time until the date and time settings return
To save battery power, the camera automatically
goes into sleep mode and the monitor turns off
if there is no operation for 3 minutes when the
camera is turned on. No picture is taken even if
the shutter button is fully pressed in this mode.
Operate the zoom lever or other buttons to restore
the camera from sleep mode before taking a
picture. If the camera is left for another 12 minutes,
it automatically turns off. Press the n button
to turn the camera on.
to the default setting varies depending on how
long the batteries have been loaded.
“Setting the date, time and time zone” (p. 13)
Miscellaneous
“The camera makes a noise when taking
pictures”.
● The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
● Press the qbutton to switch to the shooting
mode.
● Wait until #(flash charge) stops blinking before
taking pictures.
● With prolonged camera use, the internal
temperature may increase, resulting in automatic
shutdown. If this occurs, remove the battery
from the camera and wait until the camera
has sufficiently cooled. The camera’s external
temperature may also increase during use,
however this is normal and does not indicate
malfunction.
EN 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Error message
Error message
NO INK
Corrective action
Printer problem
When one of the messages below is
displayed on the monitor, check the
corrective action.
Refill the ink in the printer.
Printer problem
Remove the jammed paper.
Error message
Corrective action
JAMMED
Card problem
Insert a new card.
Printer problem
Return to the status where the
printer can be used.
SETTINGS
CHANGED*3
CARD ERROR
Card problem
Printer problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Turn off the camera and printer,
check the printer for any
problems, and then turn the
power on again.
WRITE
PROTECT
PRINT ERROR
Internal memory problem
• Insert a card.
• Erase unwanted images.*1
Problem with selected image
MEMORY FULL
Use a computer to print.
CANNOT PRINT*4
Card problem
• Replace the card.
• Erase unwanted images.*1
*1
CARD FULL
Before erasing important images, download them to
a computer.
All data will be erased.
This is displayed, for instance, when the printer’s
paper tray has been removed. Do not operate
the printer while making the print settings on the
camera.
This camera may be unable to print images taken by
other cameras.
CARD SETUP
Card problem
*2
*3
Use FG to select [FORMAT],
and press the A button. Next,
use FG to select [YES], and
press the A button.*2
POWER OFF
FORMAT
OK
SET
*4
Internal memory problem
Use FG to select [MEMORY
FORMAT], and press the
A button. Next, use FG to
select [YES], and press the
A button.*2
MEMORY SETUP
POWER OFF
MEMORY FORMAT
OK
SET
Internal memory/Card problem
Take pictures before viewing
them.
NO PICTURE
Problem with selected image
Use photo retouch software,
etc. to view the image on a
computer. If the image still
cannot be viewed, the image file
is corrupted.
PICTURE
ERROR
Problem with selected image
Use photo retouch software, etc.
to edit the image on a computer.
THE IMAGE
CANNOT
BE EDITED
Battery problem
Charge the battery.
BATTERY
EMPTY
Connection problem
Connect the camera and
computer or printer correctly.
NO
CONNECTION
Printer problem
Load paper into the printer.
NO PAPER
54 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting tips
When you are unsure of how to take a picture
that you envision, refer to the information below.
Fast-moving object
Focusing
“Focusing on the subject”
The subject is not in the center
of the frame
● Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Camera shake
Pressing the shutter button halfway (p. 15)
● Set [AF MODE] (p. 31) to [FACE/iESP]
“Taking pictures without camera shake”
● Taking a picture in [AF TRACKING] mode
(p. 31)
● Taking pictures using [IMAGE STABILIZER]
(p. 33)
The camera tracks the subject movement
automatically to focus on it continuously.
When a picture is taken of a shadowy subject, the
CCD*1 shifts to correct for camera shake even if
the ISO speed is not increased. This function is
also effective when taking pictures at a high zoom
magnification.
● Taking a picture of a shadowy subject
Using the AF illuminator makes focusing easier.
[AF ILLUMINAT.] (p. 34)
*1
A device that takes light received through the
lens and converts it into electric signals.
● Taking a picture of subjects where autofocus
is difficult
● Shooting movies using [IS MOVIE MODE]
(p. 33)
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
● Select C (SPORT) in the scene mode (p. 21)
The C (SPORT) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
● Taking pictures at a high ISO sensitivity
Subjects with low contrast
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a flash cannot be used.
“Selecting the ISO sensitivity” (p. 28)
When extremely bright objects
appear in the center of the
screen
Object with no vertical lines*1
*1
It is also effective to compose the shot by holding the
camera vertically to focus, and then returning to the
horizontal position to take the picture.
When objects are at different
distances
EN 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Exposure (brightness)
Image quality
“Taking pictures with the right
brightness”
“Taking sharper pictures”
● Taking pictures with the optical zoom
Avoid using digital zoom (p. 32) to take pictures.
● Taking pictures at a low ISO sensitivity
● Taking pictures of a subject against a backlight
Faces or backgrounds are bright even when shot
against backlight.
If the picture is taken with a high ISO sensitivity,
noise (small colored spots and color unevenness
that were not in the original image) can occur, and
the image can appear grainy.
[SHADOW ADJUST] (p. 31)
● Taking pictures using [FACE/iESP] (p. 31)
Appropriate exposure is obtained for a face
against backlight, and the face is brightened.
“Selecting the ISO sensitivity” (p. 28)
● Taking pictures using [n] for [ESP/n]
(p. 32)
Panorama
Brightness is matched with a subject in the center
of the screen and the image is not affected by
background light.
“Taking pictures so that the frames are
stitched smoothly”
● A tip for panoramic shooting
● Taking pictures using [FILL IN] (p. 26) flash
Taking pictures by pivoting with the camera at the
center prevents shifting of the image. When taking
pictures of close objects in particular, pivoting with
the lens end at the center produces favorable
results.
A subject against backlight is brightened.
● Taking pictures of a white beach or snow
scene
Set the mode to [q BEACH & SNOW] (p. 21)
● Taking pictures using exposure compensation
(p. 27)
[PANORAMA] (p. 23)
Adjust the brightness while viewing the screen
for taking the picture. Normally, taking pictures of
white subjects (such as snow) results in images
that are darker than the actual subject. Use the
exposure compensation to adjust in the positive
(+) direction to express whites as they appear.
When taking pictures of black subjects, on the
other hand, it is effective to adjust in the negative
(-) direction.
Batteries
“Making batteries last longer”
● Avoid any of the following operations when not
actually taking pictures because they deplete
the battery power
● Repeatedly pressing the shutter button
halfway.
● Repeatedly using the zoom.
Color hue
● Set [POWER SAVE] (p. 47) to [ON]
“Taking pictures with colors at the same
shade as they appear”
● Taking pictures by selecting white balance
(p. 28)
Best results in most environments can normally
be obtained with the [WB AUTO] setting, but for
some subjects, you should try experimenting
with different settings. (This is especially true for
sunshade under a clear sky, mixed natural and
artificial light settings, and so on.)
● Taking pictures using [FILL IN] (p. 26) flash
Use of the flash is also effective for shooting under
fluorescent and other artificial lighting.
56 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback/Editing tips
Playback
“Playing images in the internal memory
and card”
● Remove the card and display the images in
internal memory
● “Inserting the SD/SDHC memory card (sold
separately)” (p. 14)
● Selecting a storage device
[INTERNAL/SD] (p. 41)
“Viewing images with high picture quality
on a high-definition TV”
● Connect the camera to the TV using an HDMI
cable (sold separately)
● “To play back camera images on a TV” (p. 46)
Editing
“Erasing the sound recorded to a still
image”
● Record over the sound with silence when
playing back the image
“Adding sound to still images [R]” (p. 40)
EN 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Camera care
Battery, USB-AC adapter
(included), Charger (sold
separately)
Exterior
• Wipe gently with a soft cloth. If the camera is
very dirty, soak the cloth in mild soapy water
and wring well. Wipe the camera with the
damp cloth and then dry it with a dry cloth. If
you have used the camera at the beach, use a
cloth soaked in clean water and wrung well.
• This camera uses one Olympus lithium ion
battery (LI-50B). No other type of batteries can
be used.
Caution:
There is a risk of explosion if the battery is
replaced with the incorrect battery type.
Dispose of the used battery following the
instructions. (p. 64)
Monitor
• Wipe gently with a soft cloth.
• Power consumption by the camera varies
depending on which functions are used.
• During the conditions described below, power
is consumed continuously and the battery
becomes exhausted quickly.
Lens
• Blow dust off the lens with a commercial
blower, then wipe gently with a lens cleaner.
Battery/USB-AC adapter
• Wipe gently with a soft, dry cloth.
• The zoom is used repeatedly.
• The shutter button is pressed halfway
repeatedly in shooting mode, activating the
auto focus.
Do not use strong solvents such as benzene
or alcohol, or chemically treated cloth.
Mold may form on the lens surface if the
lens is left dirty.
• A picture is displayed on the monitor for an
extended period of time.
• The camera is connected to a printer.
• Using an exhausted battery may cause the
camera to turn off without displaying the
battery level warning.
• The rechargeable battery is not fully charged
at the time of purchase. Before using the
camera, charge it by connecting it to a
computer, or charge it using the included
USB-AC adapter (F-2AC), a separately sold
AC adapter (F-1AC/D-7AC) or charger (LI-
50C).
Storage
• When storing the camera for extended
periods, remove the battery, AC adapter and
card, and keep in a cool, dry place that is well
ventilated.
• Periodically insert the battery and test the
camera functions.
Avoid leaving the camera in places where
chemical products are handled since this
may result in corrosion.
• When the included USB-AC adapter (F-2AC)
is used, charging usually takes approximately
3.5 hours (varies on usage).
• The included USB-AC adapter (F-2AC) has
been designed to be used for charging and
playback. Make sure that shooting is not being
used while the USB-AC adapter is connected
to the camera.
58 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
• The included USB-AC adapter (F-2AC) is
designed to be used only with this camera.
Other cameras cannot be charged with this
USB-AC adapter.
• Do not connect the included USB-AC adapter
(F-2AC) to equipment other than this camera.
• For plug-in type USB-AC adapter:
The included USB-AC adapter (F-2AC) is
intended to be correctly orientated in a vertical
or floor mount position.
Using your charger and
USB-AC adapter abroad
• The charger and USB-AC adapter can be
used in most home electrical sources within
the range of 100 V to 240 V AC (50/60Hz)
around the world. However, depending on the
country or area you are in, the AC wall outlet
may be shaped differently and the charger and
USB-AC adapter may require a plug adapter to
match the wall outlet. For details, ask at your
local electrical shop or travel agent.
Charging the battery by
connecting the camera to a
computer
• Do not use travel voltage converters as
they could damage your charger and
USB-AC adapter.
The battery can be charged by connecting the
camera to a computer.
Using an SD/SDHC memory
card
Using a separately sold AC
adapter
A card (and internal memory) also corresponds
to the film that records images in a film camera.
Otherwise, the recorded images (data) can be
erased, and retouching is also available with
the use of a computer. Cards can be removed
from the camera and exchanged, but this is
not possible with the internal memory. Use of
larger capacity cards enables you to take more
pictures.
An AC adapter (D-7AC/sold separately) is useful
for time-consuming tasks such as when running
a slideshow for a long period of time. To use
a separately sold AC adapter for this camera,
the multi-adapter (CB-MA1, CB-MA3/sold
separately) is required.
Do not use any other AC adapter with this
camera.
SD/SDHC memory card write-protect
switch
Using a separately sold
charger
The SD/SDHC memory card body has a
write-protect switch. If you set the switch to
the “LOCK” side, you will not be able to write
to the card, delete data or format. Return the
switch to enable writing.
A charger (LI-50C:sold separately) can be used
to charge the battery. In this case, remove the
battery from the camera and set the battery to
the charger.
LOCK
Cards compatible with this camera
SD/SDHC memory cards (for more
information, visit the Olympus website)
EN 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a new card
Readout/recording process of the card
During shooting, the current memory
indicator is displayed in red while the camera
is writing data. Never open the battery/card
compartment cover or unplug the USB
cable. This can not only damage the image
data but also render the internal memory or
card unusable.
Cards must be formatted with this camera
before first use or after being used with other
cameras or computers.
[MEMORY FORMAT]/[FORMAT] (p. 41)
Checking the image saving location
The memory indicator shows whether the
internal memory or card is being used during
shooting and playback.
P
Current memory indicator
v: Internal memory is being used
w: Card is being used
0.0
WB
AUTO
ISO
Current memory
AUTO
indicator
00:34
4
P
14M
Displayed in red
0.0
WB
AUTO
ISO
AUTO
00:34
14M
4
4/30
Shooting mode
’10/02/26 12:30
Playback mode
Even if [MEMORY FORMAT]/[FORMAT],
[ERASE], [SEL. IMAGE], [ALL ERASE] or
[ERASE EVENT] is performed, the data in
the card is not completely erased. When
disposing of the card, damage the card to
prevent the disclosure of personal data.
60 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Number of storable pictures (still images)/Remaining recording time (movies) in the
internal memory and SD/SDHC memory cards
The figures in the following tables are quoted only as a rough guideline. The actual number of
storable pictures or remaining recording times will differ according to the shooting conditions and
memory cards used.
The figures in the table below are the number of the storable pictures when using the internal
memory formatted. “Erasing data completely [MEMORY FORMAT]/[FORMAT]” (p.41)
Still pictures
Number of storable still pictures
COMPRES-
IMAGE SIZE
Internal memory
SD/SDHC memory card (1 GB)
SION
With sound
Without sound
265
With sound
140
Without sound
141
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
L
M
264
514
6 4288×3216
4 3264×2448
n 2560×1920
3 2048×1536
2 1600×1200
1 1280×960
7 640×480
518
275
277
449
452
239
241
864
877
462
469
713
722
380
385
1,426
1,118
2,113
1,783
3,170
2,594
4,755
7,133
11,413
350
1,463
1,141
2,194
1,840
3,356
2,717
5,188
8,152
14,267
352
766
786
605
617
1,164
961
1,211
992
1,781
1,441
2,633
4,325
6,729
186
1,892
1,514
2,883
5,046
8,651
187
K 4288×2416
0 1920×1080
679
687
362
367
1,630
3,003
1,678
3,170
890
917
1,682
1,781
Movies
Remaining recording time
Internal memory SD/SDHC memory card (1 GB)
With sound Without sound With sound Without sound
19 min. 54 sec. 20 min. 13 sec. 10 min. 32 sec. 10 min. 42 sec.
IMAGE
QUALITY
IMAGE SIZE
L 1280×720
8 640×480
L
M
L
39 min. 9 sec.
39 min. 9 sec.
40 min. 25 sec. 20 min. 44 sec. 21 min. 24 sec.
40 min. 25 sec. 20 min. 44 sec. 21 min. 24 sec.
1 h 15 min.
52 sec.
1 h 20 min.
44 sec.
M
L
40 min. 10 sec. 42 min. 45 sec.
1 h 15 min.
52 sec.
1 h 20 min.
9
320×240
40 min. 10 sec. 42 min. 45 sec.
44 sec.
The maximum file size of a single movie is 4 GB, regardless of the capacity of the card.
Increasing the number of pictures that can be taken
Either erase unwanted images, or connect the camera to a computer or other device to save the
images, and then erase the images in the internal memory or card. [ERASE] (p. 18, 39), [ALL
ERASE] (p. 39), [SEL. IMAGE] (p. 39), [ERASE EVENT](p. 39), [MEMORY FORMAT]/[FORMAT]
(p. 41)
EN 61
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
Handling the Camera
WARNING
Do not use the camera near flammable or
explosive gases.
Do not use the flash and LED on people
(infants, small children, etc.) at close range.
You must be at least 1 m (3 ft.) away from the
faces of your subjects. Firing the flash too close
to the subject’s eyes could cause a momentary
loss of vision.
CAUTION
RISK OF ELECTRIC SHOCK
•
•
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED OLYMPUS
SERVICE PERSONNEL.
•
•
Keep young children and infants away from
the camera.
An exclamation mark enclosed in a
triangle alerts you to important operating
and maintenance instructions in the
documentation provided with the product.
•
Always use and store the camera out of the
reach of young children and infants to prevent
the following dangerous situations which could
cause serious injury:
DANGER
WARNING
CAUTION
If the product is used without observing
the information given under this symbol,
serious injury or death may result.
•
•
•
•
Becoming entangled in the camera strap,
causing strangulation.
Accidentally swallowing the battery, cards or
other small parts.
Accidentally firing the flash into their own eyes
or those of another child.
Accidentally being injured by the moving parts
of the camera.
If the product is used without observing the
information given under this symbol, injury
or death may result.
If the product is used without observing the
information given under this symbol, minor
personal injury, damage to the equipment,
or loss of valuable data may result.
WARNING!
•
•
Do not look at the sun or strong lights with the
camera.
Do not use or store the camera in dusty or
humid places.
TO AVOID THE RISK OF FIRE OR ELECTRICAL SHOCK,
NEVER DISASSEMBLE, EXPOSE THIS PRODUCT TO
WATER OR OPERATE IN A HIGH HUMIDITY ENVIRONMENT.
•
•
Do not cover the flash with a hand while firing.
Use SD/SDHC memory cards only. Never use
other types of cards.
If you accidently insert another type of card into
the camera, contact an authorized distributor or
service center. Do not try to remove the card by
force.
General Precautions
Read All Instructions — Before you use the
product, read all operating instructions. Save all
manuals and documentation for future reference.
Cleaning — Always unplug this product from the
wall outlet before cleaning. Use only a damp
cloth for cleaning. Never use any type of liquid or
aerosol cleaner, or any type of organic solvent to
clean this product.
CAUTION
•
Stop using the camera immediately if you
notice any unusual odors, noise, or smoke
around it.
Attachments — For your safety, and to avoid
damaging the product, use only accessories
recommended by Olympus.
•
Never remove the batteries with bare hands,
Water and Moisture — For precautions on
products with weatherproof designs, read the
weatherproofing sections.
Location — To avoid damage to the product, mount
the product securely on a stable tripod, stand,
or bracket.
Power Source — Connect this product only to the
power source described on the product label.
Lightning — If a lightning storm occurs while using
an AC adapter, remove it from the wall outlet
immediately.
which may cause a fire or burn your hands.
Never hold or operate the camera with wet
hands.
Do not leave the camera in places where it may
be subject to extremely high temperatures.
Doing so may cause parts to deteriorate and, in
some circumstances, cause the camera to catch
fire. Do not use the charger or AC adapter if it is
covered (such as a blanket). This could cause
overheating, resulting in fire.
•
•
•
Foreign Objects — To avoid personal injury, never
insert a metal object into the product.
Heat — Never use or store this product near any
heat source such as a radiator, heat register,
stove, or any type of equipment or appliance that
generates heat, including stereo amplifiers.
62 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Handle the camera with care to avoid getting a
low-temperature burn.
•
•
Do not use a battery if it is cracked or broken.
If a battery leaks, becomes discolored or
deformed, or becomes abnormal in any other way
during operation, stop using the camera.
If a battery leaks fluid onto your clothing or skin,
remove the clothing and flush the affected area
with clean, running cold water immediately. If
the fluid burns your skin, seek medical attention
immediately.
•
When the camera contains metal parts,
overheating can result in a low-temperature
burn. Pay attention to the following:
•
•
•
When used for a long period, the camera will
get hot. If you hold on to the camera in this
state, a low-temperature burn may be caused.
In places subject to extremely cold
•
Never subject batteries to strong shocks or
continuous vibration.
temperatures, the temperature of the camera’s
body may be lower than the environmental
temperature. If possible, wear gloves when
handling the camera in cold temperatures.
CAUTION
•
•
•
Before loading, always inspect the battery carefully
for leaks, discoloration, warping, or any other
abnormality.
The battery may become hot during prolonged
use. To avoid minor burns, do not remove it
immediately after using the camera.
Always unload the battery from the camera before
storing the camera for a long period.
•
Be careful with the strap.
•
Be careful with the strap when you carry the
camera. It could easily catch on stray objects
and cause serious damage.
Battery Handling Precautions
Follow these important guidelines to prevent
batteries from leaking, overheating, burning,
exploding, or causing electrical shocks or
burns.
Caution for Usage Environment
•
To protect the high-precision technology contained
in this product, never leave the camera in the
places listed below, no matter if in use or storage:
DANGER
•
Places where temperatures and/or humidity
are high or go through extreme changes.
Direct sunlight, beaches, locked cars, or near
other heat sources (stove, radiator, etc.) or
humidifiers.
•
The camera uses a lithium ion battery specified
by Olympus. Charge the battery with the specified
AC adapter or charger. Do not use any other AC
adapters or chargers.
•
•
Never heat or incinerate batteries.
Take precautions when carrying or storing
batteries to prevent them from coming into contact
with any metal objects such as jewelry, pins,
fasteners, etc.
Never store batteries where they will be
exposed to direct sunlight, or subjected to high
temperatures in a hot vehicle, near a heat source,
etc.
To prevent causing battery leaks or damaging their
terminals, carefully follow all instructions regarding
the use of batteries. Never attempt to disassemble
a battery or modify it in any way, solder, etc.
If battery fluid gets into your eyes, flush your eyes
immediately with clear, cold running water and
seek medical attention immediately.
Always store batteries out of the reach of small
children. If a child accidentally swallows a battery,
seek medical attention immediately.
•
•
•
In sandy or dusty environments.
Near flammable items or explosives.
In wet places, such as bathrooms or in the rain.
When using products with weatherproof designs,
read their manuals as well.
•
•
•
In places prone to strong vibrations.
•
•
Never drop the camera or subject it to severe
shocks or vibrations.
When mounted on a tripod, adjust the position of
the camera with the tripod head. Do not twist the
camera.
•
•
Do not touch electric contacts on cameras.
Do not leave the camera pointed directly at the
sun. This may cause lens or shutter curtain
damage, color failure, ghosting on the CCD, or
may possibly cause fires.
Do not push or pull severely on the lens.
Before storing the camera for a long period,
remove the batteries. Select a cool, dry location
for storage to prevent condensation or mold from
forming inside the camera. After storage, test the
camera by turning it on and pressing the shutter
button to make sure that it is operating normally.
Always observe the operating environment
restrictions described in the camera’s manual.
•
•
•
•
WARNING
Keep batteries dry at all times.
•
•
To prevent batteries from leaking, overheating,
or causing a fire or explosion, use only batteries
recommended for use with this product.
Insert the battery carefully as described in the
operating instructions.
If rechargeable batteries have not been recharged
within the specified time, stop charging them and
do not use them.
•
•
•
EN 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Handling Precautions
Disclaimer of Warranty
•
•
This camera uses a lithium ion battery specified by
Olympus. Do not use any other type of battery.
If the battery’s terminals get wet or greasy, camera
contact failure may result. Wipe the battery well
with a dry cloth before use.
Always charge a battery when using it for the first
time, or if it has not been used for a long period.
When operating the camera with battery power
at low temperatures, try to keep the camera and
spare battery as warm as possible. A battery that
has run down at low temperatures may be restored
after it is warmed at room temperature.
The number of pictures you can take may vary
depending on the shooting conditions or battery.
Before going on a long trip, and especially before
traveling abroad, purchase extra batteries. A
recommended battery may be difficult to obtain
while traveling.
Please recycle batteries to help save our planet’s
resources. When you throw away dead batteries,
be sure to cover their terminals and always
observe local laws and regulations.
•
Olympus makes no representations or warranties,
either expressed or implied, by or concerning any
content of these written materials or software, and
in no event shall be liable for any implied warranty
of merchantability or fitness for any particular
purpose or for any consequential, incidental or
indirect damages (including but not limited to
damages for loss of business profits, business
interruption and loss of business information)
arising from the use or inability to use these
written materials or software or equipment. Some
countries do not allow the exclusion or limitation
of liability for consequential or incidental damages
or of the implied warranty, so the above limitations
may not apply to you.
•
•
•
•
•
Olympus reserves all rights to this manual.
Warning
•
Unauthorized photographing or use of
copyrighted material may violate applicable
copyright laws. Olympus assumes no
responsibility for unauthorized photographing,
use or other acts that infringe upon the rights of
copyright owners.
LCD Monitor
•
Do not push the monitor forcibly; otherwise the
image may become vague, resulting in a playback
mode failure or damage to the monitor.
Copyright Notice
•
•
A strip of light may appear on the top/bottom of the
monitor, but this is not a malfunction.
When a subject is viewed diagonally in the
camera, the edges may appear zigzagged on the
monitor. This is not a malfunction; it will be less
noticeable in playback mode.
In places subject to low temperatures, the LCD
monitor may take a long time to turn on or its
color may change temporarily. When using the
camera in extremely cold places, it is a good idea
to occasionally place it in a warm place. An LCD
monitor exhibiting poor performance due to low
temperatures will recover in normal temperatures.
The LCD used for the monitor is made with
high-precision technology. However, black spots
or bright spots of light may appear constantly on
the LCD Monitor. Due to its characteristics or the
angle at which you are viewing the monitor, the
spot may not be uniform in color and brightness.
This is not a malfunction.
All rights reserved. No part of these written
materials or this software may be reproduced
or used in any form or by any means, electronic
or mechanical, including photocopying and
recording or the use of any type of information
storage and retrieval system, without the prior
written permission of Olympus. No liability
is assumed with respect to the use of the
information contained in these written materials
or software, or for damages resulting from
the use of the information contained therein.
Olympus reserves the right to alter the features
and contents of this publication or software
without obligation or advance notice.
•
•
Legal and Other Notices
•
•
Olympus makes no representations or warranties
regarding any damages, or benefit expected by
using this unit lawfully, or any request from a third
person, which are caused by the inappropriate use
of this product.
Olympus makes no representations or warranties
regarding any damages or any benefit expected
by using this unit lawfully which are caused by
erasing picture data.
64 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Notice
•
•
Radio and Television Interference
Changes or modifications not expressly approved
by the manufacturer may void the user’s authority
to operate this equipment. This equipment has
been tested and found to comply with the limits for
a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide
reasonable protection against harmful interference
in a residential installation.
•
•
This equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
•
•
Adjust or relocate the receiving antenna.
Increase the distance between the camera and
receiver.
•
•
Connect the equipment to an outlet on a circuit
different from that to which the receiver is
connected.
Consult your dealer or an experienced radio/TV
technician for help. Only the OLYMPUS-supplied
USB cable should be used to connect the
camera to USB enabled personal computers
(PC).
Any unauthorized changes or modifications to
this equipment would void the user’s authority
to operate it.
Use Only Dedicated Rechargeable
Battery, Battery Charger and
AC adapter
We strongly recommend that you use only
the genuine Olympus dedicated rechargeable
battery, battery charger and AC adapter with
this camera. Using a non-genuine rechargeable
battery, battery charger and/or AC adapter
may result in fire or personal injury due to
leakage, heating, ignition or damage to the
battery. Olympus does not assume any liability
for accidents or damage that may result from
the use of a battery, battery charger and/or
AC adapter that are not genuine Olympus
accessories.
EN 65
Download from Www.Somanuals.com. All Manuals Search And Download.
preventive maintenance, installation,
deinstallation, or maintenance.
Olympus reserves the right to (i) use
For customers in North and South
America
For customers in USA
Declaration of Conformity
reconditioned, refurbished, and/or serviceable
used parts (that meet Olympus’s quality
assurance standards) for warranty or any other
repairs and (ii) make any internal or external
design and/or feature changes on or to its
products without any liability to incorporate such
changes on or to the Products.
Model Number
Trade Name
Responsible Party
:SP-800UZ
:OLYMPUS
:
Address
:3500 Corporate
Parkway, P.O. Box
610, Center Valley, PA
18034-0610, U.S.A.
:484-896-5000
WHAT IS NOT COVERED BY THIS
LIMITED WARRANTY
Excluded from this limited warranty and not
warranted by Olympus in any fashion, either
express, implied, or by statute, are:
Telephone Number
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
(a) products and accessories not manufactured by
Olympus and/or not bearing the “OLYMPUS” brand
label (the warranty coverage for products and
accessories of other manufacturers, which may be
distributed by Olympus, is the responsibility of the
manufacturers of such products and accessories
in accordance with the terms and duration of such
manufacturers’ warranties);
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference
received, including interference that may cause
undesired operation.
(b) any Product which has been disassembled,
repaired, tampered with, altered, changed, or
modified by persons other than Olympus’s own
authorized service personnel unless repair by
others is made with the written consent of Olympus;
(c) defects or damage to the Products resulting
from wear, tear, misuse, abuse, negligence,
sand, liquids, impact, improper storage,
nonperformance of scheduled operator and
maintenance items, battery leakage, use of non-
“OLYMPUS” brand accessories, consumables, or
supplies, or use of the Products in combination
with non-compatible devices;
For customers in Canada
This Class B digital apparatus meets all
requirements of the Canadian Interference-
Causing Equipment Regulations.
OLYMPUS WORLDWIDE LIMITED
WARRANTY - IMAGING PRODUCTS
Olympus warrants that the enclosed Olympus®
imaging product(s) and related Olympus®
accessories (individually a “Product” and
collectively the “Products”) will be free from
defects in materials and workmanship under
normal use and service for a period of one (1)
year from the date of purchase.
If any Product proves to be defective within the
one-year warranty period, the customer must
return the defective Product to any of Olympus
Service Centers, following the procedure
set forth below (See “WHAT TO DO WHEN
SERVICE IS NEEDED”).
Olympus, at its sole discretion, will repair,
replace, or adjust the defective Product, provided
that Olympus investigation and factory inspection
disclose that (a) such defect developed under
normal and proper use and (b) the Product is
covered under this limited warranty.
Repair, replacement, or adjustment of defective
Products shall be Olympus’s sole obligation and
the customer’s sole remedy hereunder.
The customer is liable and shall pay for shipment
of the Products to the Olympus Service Center.
Olympus shall not be obligated to perform
(d) software programs;
(e) supplies and consumables (including but not
limited to lamps, ink, paper, film, prints, negatives,
cables and batteries); and/or
(f) Products which do not contain a validly placed
and recorded Olympus serial number, unless they
are a model on which Olympus does not place
and record serial numbers.
EXCEPT FOR THE LIMITED WARRANTY SET
FORTH ABOVE, OLYMPUS MAKES NO AND
DISCLAIMS ALL OTHER REPRESENTATIONS,
GUARANTIES, CONDITIONS, AND
WARRANTIES CONCERNING THE
PRODUCTS, WHETHER DIRECT OR INDIRECT,
EXPRESS OR IMPLIED, OR ARISING UNDER
ANY STATUTE, ORDINANCE, COMMERCIAL
USAGE OR OTHERWISE, INCLUDING BUT
NOT LIMITED TO ANY WARRANTY OR
REPRESENTATION AS TO THE SUITABILITY,
DURABILITY, DESIGN, OPERATION, OR
66 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITON OF THE PRODUCTS (OR ANY
PART THEREOF) OR THE MERCHANTABILITY
OF THE PRODUCTS OR THEIR FITNESS FOR
A PARTICULAR PURPOSE, OR RELATING
TO THE INFRINGEMENT OF ANY PATENT,
COPYRIGHT, OR OTHER PROPRIETARY
RIGHT USED OR INCLUDED THEREIN.
IF ANY IMPLIED WARRANTIES APPLY AS
A MATTER OF LAW, THEY ARE LIMITED
IN DURATION TO THE LENGTH OF THIS
LIMITED WARRANTY.
SOME STATES MAY NOT RECOGNIZE
A DISCLAIMER OR LIMITATION OF
WARRANTIES AND/OR LIMITATION OF
LIABILITY SO THE ABOVE DISCLAIMERS AND
EXCLUSIONS MAY NOT APPLY.
THE CUSTOMER MAY ALSO HAVE DIFFERENT
AND/OR ADDITIONAL RIGHTS AND REMEDIES
THAT VARY FROM STATE TO STATE.
THE CUSTOMER ACKNOWLEDGES AND
AGREES THAT OLYMPUS SHALL NOT
BE RESPONSIBLE FOR ANY DAMAGES
THAT THE CUSTOMER MAY INCUR FROM
DELAYED SHIPMENT, PRODUCT FAILURE,
PRODUCT DESIGN, SELECTION, OR
WHAT TO DO WHEN SERVICE IS NEEDED
The customer must transfer any image or other
data saved on a Product to another image or
data storage medium and/or remove any film
from the Product prior to sending the Product to
Olympus for service.
IN NO EVENT SHALL OLYMPUS BE
RESPONSIBLE FOR SAVING, KEEPING OR
MAINTAINING ANY IMAGE OR DATA SAVED
ON A PRODUCT RECEIVED BY IT FOR
SERVICE, OR ON ANY FILM CONTAINED
WITHIN A PRODUCT RECEIVED BY IT
FOR SERVICE, NOR SHALL OLYMPUS BE
RESPONSIBLE FOR ANY DAMAGES IN
THE EVENT ANY IMAGE OR DATA IS LOST
OR IMPAIRED WHILE SERVICE IS BEING
PERFORMED (INCLUDING, WITHOUT
LIMITATION, DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR IMPAIRMENT.
PRODUCTION, IMAGE OR DATA LOSS OR
IMPAIRMENT OR FROM ANY OTHER CAUSE,
WHETHER LIABILITY IS ASSERTED IN
CONTRACT, TORT (INCLUDING NEGLIGENCE
AND STRICT PRODUCT LIABILITY) OR
OTHERWISE. IN NO EVENT SHALL OLYMPUS
BE LIABLE FOR ANY INDIRECT, INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES OF
ANY KIND (INCLUDING WITHOUT LIMITATION
LOSS OF PROFITS OR LOSS OF USE),
WHETHER OR NOT OLYMPUS SHALL BE OR
SHOULD BE AWARE OF THE POSSIBILITY OF
SUCH POTENTIAL LOSS OR DAMAGE.
Package the Product carefully using ample
padding material to prevent damage in transit
and either deliver it to the Authorized Olympus
Dealer that sold you the Product or ship it
postage prepaid and insured to any of our
Olympus Service Centers.
When returning Products for service, your
package should include the following:
1
2
Sales receipt showing date and place of
purchase.
Copy of this limited warranty bearing the
Product serial number corresponding to the
serial number on the Product (unless it is a
model on which Olympus does not place and
record serial numbers).
Representations and warranties made by any
person, including but not limited to dealers,
representatives, salespersons, or agents of
Olympus, which are inconsistent or in conflict
with or in addition to the terms of this limited
warranty, shall not be binding upon Olympus
unless reduced to writing and approved by an
expressly authorized officer of Olympus.
This limited warranty is the complete and
exclusive statement of warranty which
Olympus agrees to provide with respect to the
Products and it shall supersede all prior and
contemporaneous oral or written agreements,
understandings, proposals, and communications
pertaining to the subject matter hereof.
This limited warranty is exclusively for the
benefit of the original customer and cannot be
transferred or assigned.
3
4
A detailed description of the problem.
Sample prints, negatives, digital prints (or files on
disk) if available and related to the problem.
When service is completed, the Product will be
returned to you postage prepaid.
WHERE TO SEND PRODUCT FOR
SERVICE
See “WORLDWIDE WARRANTY” for the
nearest service center.
INTERNATIONAL WARRANTY SERVICE
International warranty service is available under
this warranty.
EN 67
Download from Www.Somanuals.com. All Manuals Search And Download.
affect the customer’s legal warranty rights under
the applicable national legislation governing the
sale of consumer goods mentioned above.
This Guarantee does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the
Guarantee period referred to above.
For customers in Europe
“CE” mark indicates that this product complies
with the European requirements for safety,
health, environment and customer protection.
“CE” mark cameras are intended for sales in
Europe.
2
a. Any defect that occurs due to mishandling
(such as an operation performed that is not
mentioned in the Handling Care or other
sections of the instructions, etc.)
b. Any defect that occurs due to repair,
modification, cleaning, etc. performed by
anyone other than Olympus or an Olympus
authorized service station.
This symbol [crossed-out wheeled bin WEEE
Annex IV] indicates separate collection of waste
electrical and electronic equipment in the EU
countries.
Please do not throw the equipment into the
domestic refuse.
Please use the return and collection systems
available in your country for the disposal of this
product.
c. Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase of
the product.
d. Any defect or damage that occurs due to fire,
earthquake, flood damage, thunderbolt, other
natural disasters, environmental pollution and
irregular voltage sources.
This symbol [crossed-out wheeled bin Directive
2006/66/EC Annex II] indicates separate
collection of waste batteries in the EU countries.
Please do not throw the batteries into the
domestic refuse. Please use the return and
collection systems available in your country for
the disposal of the waste batteries.
e. Any defect that occurs due to careless or
improper storage (such as keeping the
product under conditions of high temperature
and humidity, near insect repellents such as
naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted
batteries, etc.
g. Any defect that occurs due to sand, mud, etc.
entering the inside of the product casing.
h. When the Guarantee Certificate is not
returned with the product.
i. When any alterations whatsoever are made to
the Guarantee Certificate regarding the year,
month and date of purchase, the customer’s
name, the dealer’s name, and the serial
number.
j. When proof of purchase is not presented with
this Guarantee Certificate.
This Guarantee applies to the product only; the
Guarantee does not apply to any other accessory
equipment, such as the case, strap, lens cap and
batteries.
Olympus’s sole liability under this Guarantee shall
be limited to repairing or replacing the product.
Any liability under the Guarantee for indirect
or consequential loss or damage of any kind
incurred or suffered by the customer due to a
defect of the product, and in particular any loss
or damage caused to any lenses, films, other
equipment or accessories used with the product
or for any loss resulting from a delay in repair or
loss of data, is excluded. Compelling regulations
by law remain unaffected by this.
Provisions of warranty
1
If this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during the applicable national
warranty period and has been purchased from
an authorized Olympus distributor within the
business area of Olympus Europa Holding GmbH
com this product will be repaired, or at Olympus’s
option replaced, free of charge. To claim under
this warranty the customer must take the product
before the end of the applicable national warranty
period to the dealer where the product was
purchased or any other Olympus service station
within the business area of Olympus Europa
Holding GmbH as stipulated on the website:
period of the World Wide Guarantee the customer
may turn the product in at any Olympus service
station. Please notice that not in all countries
such Olympus service station exists.
3
4
2
The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
Provisions of Guarantee
1
“OLYMPUS IMAGING CORP., Shinjuku
Monolith, 2-3-1 Nishi-Shinjuku, Shinjuku-ku,
Tokyo 163-0914, Japan grants a one year World
Wide Guarantee. This worldwide Guarantee
must be presented at an Olympus authorized
repair service station before any repair can
be made under conditions of this Guarantee.
This Guarantee is valid only if the Guarantee
Certificate and proof of purchase are presented
at the Olympus repair service station. Please note
that this Guarantee is in addition to and does not
68 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
e. Any defect that occurs due to careless or
improper storage (such as keeping the
product under conditions of high temperature
and humidity, near insect repellents such as
naphthalene or harmful drugs, etc.), improper
maintenance, etc.
f. Any defect that occurs due to exhausted
batteries, etc.
g. Any defect that occurs due to sand, mud, etc.
entering the inside of the product casing.
h. When this Warranty Certificate is not returned
with the product.
i. When any alterations whatsoever are made
to the Warranty Certificate regarding the year,
month and date of purchase, the customer’s
name, the dealer’s name, and the serial
number.
j. When proof of purchase is not presented with
this Warranty Certificate.
This Warranty applies to the product only; the
Warranty does not apply to any other accessory
equipment, such as the case, strap, lens cap and
batteries.
Notes regarding Guarantee maintenance
1
This Guarantee will only be valid if the Guarantee
Certificate is duly completed by Olympus or an
authorized dealer or other documents contain
sufficient proof. Therefore, please make sure
that your name, the name of the dealer, the
serial number and the year, month and date of
purchase are all completed or the original invoice
or the sales receipt (indicating the dealer’s
name, the date of purchase and product type) is
attached to this Guarantee Certificate. Olympus
reserves the right to refuse free-of-charge service
if neither Guarantee Certificate is completed
nor the above document is attached or if the
information contained in it is incomplete or
illegible.
2
Since this Guarantee Certificate will not be re-
issued, keep it in a safe place.
*
Please refer to the list on the web site: http://
Olympus service network.
4
5
For customers in Asia
Olympus’ sole liability under this warranty shall be
limited to repairing or replacing the product and
any liability for indirect or consequential loss or
damage of any kind incurred or suffered by the
customer due to a defect in the product, and in
particular any loss or damage caused to any film
or lenses or other equipment or accessories used
with the product or for any loss resulting from
delay in repair, is excluded.
Provisions of warranty
1
lf this product proves to be defective, although it
has been used properly (in accordance with the
written Handling Care and Operating instructions
supplied with it), during a period of up to one
year from the date of purchase this product will
be repaired, or at Olympus’s option replaced,
free of charge. To claim under warranty the
customer must take the product and this Warranty
certificate before the end of the one year warranty
period to the dealer where the product was
purchased or any Olympus authorized service
station listed in the instructions and request the
necessary repairs.
Notes;
1
This Warranty is in addition to and does not affect
the customer’s statutory right.
lf you have any queries regarding this Warranty,
call any of the Olympus authorized service
stations listed in the instructions.
2
2
3
The customer shall transport the product to the
dealer or Olympus authorized service station
at his own risk and shall be responsible for any
costs incurred in transporting the product.
This warranty does not cover the following
and the customer will be required to pay repair
charge, even for defects occurring within the one
year period referred to above.
a. Any defect that occurs due to mishandling
(such as an operation performed that is not
mentioned in the Handling Care or other
sections of the instructions, etc.)
b. Any defect that occurs due to repair,
modification, cleaning, etc. performed by
anyone other than Olympus or an Olympus
authorized service station.
c. Any defect or damage that occurs due to
transport, a fall, shock, etc. after purchase of
the product.
Notes regarding warranty maintenance
1
This Warranty will only be valid if the Warranty
Certificate is duly completed by Olympus or the
dealer. Make sure that your name, the name of
the dealer, the serial number and the year, month
and date of purchase are all completed.
Since this Warranty Certificate will not be
re-issued, keep it in a safe place.
Any request for repair by a customer in same
country where the product was purchased shall
be subject to the terms of the warranty issued by
the Olympus distributor in that country. Where
the local Olympus distributor does not issue a
separate warranty or where the customer is not in
the country where the product was purchased the
terms of this worldwide warranty shall apply.
Where applicable, this Warranty is valid
worldwide. The Olympus authorized service
stations listed in this Warranty will gladly honor it.
Please refer to the appended list for the
authorized international Olympus service
network.
2
3
4
d. Any defect or damage that occurs due to fire,
earthquake, flood damage, thunderbolt, other
natural disasters, environmental pollution and
irregular voltage sources.
*
EN 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Disclaimer of Warranty
Olympus makes no representations or
warranties, either expressed or implied, by or
concerning any content if these written materials
or software, and in no event shall be liable
for any implied warranty of merchantability or
fitness for any particular purpose or for any
consequential, incidental or indirect damages
(including but not limited to damages for loss
of business profits, business interruption and
loss of business information) arising from the
use of inability to use these written materials or
software. Some states do not allow the exclusion
or limitation of liability for consequential or
incidental damages, so the above limitations
may not apply to you.
Trademarks
•
•
IBM is a registered trademark of International
Business Machines Corporation.
Microsoft and Windows are registered trademarks
of Microsoft Corporation.
•
•
•
Macintosh is a trademark of Apple Inc.
The SDHC logo is a trademark.
All other company and product names are
registered trademarks and/or trademarks of their
respective owners.
•
The standards for camera file systems referred to
in this manual are the “Design rule for Camera File
system/DCF” standards stipulated by the Japan
Electronics and Information Technology Industries
Association (JEITA).
THIS PRODUCT IS LICENSED UNDER THE
AVC PATENT PORTFOLIO LICENSE FOR THE
PERSONAL AND NONCOMMERCIAL USE
OF A CONSUMER TO (i) ENCODE VIDEO IN
COMPLIANCE WITH THE AVC STANDARD (“AVC
VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT
WAS ENCODED BY A CONSUMER ENGAGED
IN A PERSONAL AND NON-COMMERCIAL
ACTIVITY AND/OR WAS OBTAINED FROM A
VIDEO PROVIDER LICENSED TO PROVIDE AVC
VIDEO. NO LICENSE IS GRANTED OR SHALL
BE IMPLIED FOR ANY OTHER USE. ADDITIONAL
INFORMATION MAY BE OBTAINED FROM MPEG
LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM
70 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Camera
Product type
:
Digital camera (for shooting and displaying)
Recording system
Still pictures
:
:
:
Digital recording, JPEG (in accordance with Design rule for Camera File system (DCF))
Exif 2.2, Digital Print Order Format (DPOF), PRINT Image Matching III, PictBridge
Wave format
Applicable standards
Sound with still
pictures
Movie
:
:
MPEG-4AVC/H.264
Memory
Internal memory
SD memory card
SDHC memory card
No. of effective pixels
Image pickup device
Lens
:
:
:
14,000,000 pixels
1/2.33” CCD (primary color filter)
Olympus lens 4.9 to 147 mm, f2.8 to 5.6
(equivalent to 28 to 840 mm on a 35 mm camera)
Photometric system
Shutter speed
:
:
:
Digital ESP metering, spot metering system
1/2 to 1/2000 sec.
Shooting range
0.1 m (0.3 ft.) to (W) 1.8 m (5.9 ft.) to (T) (normal/macro mode)
0.01 m (0.03 ft.) to (super macro mode)
Monitor
:
:
3.0” TFT color LCD display, 230,000 dots
Connector
Multi-connector (DC-IN jack, USB connector, A/V OUT jack) /
HDMI micro connector (type D)
Automatic calendar
system
:
:
2000 up to 2099
Operating environment
Temperature
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Humidity
Power supply
Dimensions
:
:
:
30 % to 90 % (operation)/10 % to 90 % (storage)
One Olympus lithium ion battery (LI-50B) or separately sold AC adapter
107.3 mm (W) × 73.4 mm (H) × 84.7 mm (D)
(4.2 × 2.9 × 3.3 in.) (excluding protrusions)
Weight
:
418 g (14.7 oz) (Including battery and card)
EN 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Lithium ion battery (LI-50B)
Product type
:
:
:
:
:
Lithium ion rechargeable battery
LI-50BA/LI-50BB
Model No.
Standard voltage
Standard capacity
Battery life
DC 3.7 V
925 mAh
Approx. 300 full charges (varies on usage)
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (charging)/
-10 °C to 60 °C (14 °F to 140 °F) (operation)/
-10 °C to 35 °C (14 °F to 95 °F) (storage)
Dimensions
Weight
:
:
34.4 mm (W) × 40.0 mm (H) × 7.0 mm (D) (1.4 × 1.6 × 0.3 in.)
Approx. 20 g (0.7 oz)
USB-AC adapter (F-2AC)
Model No.
:
:
:
F-2AC-1A/F-2AC-2A/F-2AC-1B/F-2AC-2B
AC 100 to 240 V (50/60 Hz)
DC 5 V, 500 mA
Power requirements
Output
Operating environment
Temperature
:
0 °C to 40 °C (32 °F to 104 °F) (operation)/
-20 °C to 60 °C (-4 °F to 140 °F) (storage)
Dimensions
Weight
:
:
50.0 mm (W) × 54.0 mm (H) × 22.0 mm (D) (2.0 × 2.1 × 0.9 in.)
Approx. 46.0 g (1.6 oz) (F-2AC-1A)/Approx. 42.0 g (1.5 oz) (F-2AC-2A)/
Approx. 44.0 g (1.6 oz) (F-2AC-1B)/Approx. 40.0 g (1.4 oz) (F-2AC-2B)
Design and specifications subject to change without notice.
HDMI, the HDMI Logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
72 EN
Download from Www.Somanuals.com. All Manuals Search And Download.
VN695901
Download from Www.Somanuals.com. All Manuals Search And Download.
|