C5150/C5200/C5400/C5400n
Duplex Option
Installation Instructions
Oki 42158411 Duplex Unit
7. If you will always be using duplex
printing, go into the printer menu
and change the default setting for
DUPLEX to ON:
2. Right click the Postscript
Install the Duplexer
1. Unpack the duplexer and remove
the shipping materials.
emulation printer icon, then click
Properties.
3. Next:
– Windows XP, 2000 and NT 4.0:
click the Device Settings tab.
– Windows Me and 98: click the
Device Options tab.
2. Turn off the printer.
a. Press + until you see PRINT
3. Insert the duplexer through the
hinged door in the back of the
printer.
MENU on the display.
b. Press ENTER.
c. Press + until you see DUPLEX
4. Under Installable Options, click
on the display.
Duplex and select Installed.
5. Click OK, then close the Printers
d. Press ENTER.
(Printers and Faxes) dialog box.
e. Press + to change the setting
Hiper-C Driver (C5150, C5200)
from OFF to ON.
1. Click Start →Settings →Printers
[Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
f. Press ENTER to engage the
setting, then press ON-LINE to
save the setting and exit the
menu.
2. Right click the printer icon, then
click Properties.
Activate the
Duplexer in the
Printer Driver
3. Next:
– Windows XP, 2000 and NT 4.0:
click the Device Option(s) tab.
– Windows Me and 98: click the
Printer Properties tab, then click
the Device Option tab.
4. Turn on the printer.
5. Print out the Menu Map.
Windows®
O
N
LINE
BACK
ENTER
4. Select Duplex Option Unit.
PCL Driver (C5400, C5400n)
MENU
5. Click OK, then close the Printers
CANCEL
Click Start →Settings →Printers
[Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
(Printers and Faxes) dialog box.
Macintosh®
a. Press + one or more times until
INFORMATION MENU appears
on the display.
OS 8.x and 9.x (C5400n)
8. Right click the PCL printer icon,
then click Properties
1. Activate Chooser from the Apple
b. Press ENTER twice.
menu.
9. Click the Device Option(s) tab.
10.Click Duplex Option Unit.
The MenuMap prints.
2. Select LaserWriter 8.
3. Click Printer →Setup.
4. Click Configure.
6. Check to be sure that “DUPLEX
installed” shows in the information
at the top of the first page. If it
doesn’t, turn off the printer and
push firmly on the duplexer to be
sure it is firmly seated in the
11.Click OK, then close the Printers
(Printers and Faxes) dialog box.
5. Change the Duplex Unit setting to
Postscript Emulation Driver
(C5400n)
1. Click Start →Settings →Printers
[Printers and Faxes for XP].
The Printers (Printers and Faxes)
dialog box opens.
Installed.
6. Click OK twice.
7. Close Chooser.
printer, then turn on the printer and
print the MenuMap again.
OS X to X.1 (C5400n)
No activation is required.
(continued on back)
© 2004 Oki Data Americas, Inc.
58368601
Download from Www.Somanuals.com. All Manuals Search And Download.
|