OK International Soldering Gun MFR 2200 Series User Manual

MFR-2200 Series  
Dual Simultaneous Soldering & Rework System  
Systems Guide & MFR Range Comparison  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Configurations &  
Part Numbers  
6 NEW SYSTEMS  
MFR-2210  
MFR-2220  
MFR-2240  
MFR-2241  
MFR-2211  
MFR-2222  
Example  
MFR-2241  
MFR-2xxx  
MFR-x2xx  
MFR-xx4x  
MFR-xxx1  
= 2 Outputs  
= 2 Dual, no pump  
= 4 Tweezers  
= 1 Cartridge  
Confidential and Proprietary to OK International. © OK International All rights reserved.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Power Supply Comparison  
MFR-PS1K (Existing)  
MFR-PS2200 (New)  
Power: 50W  
Power: 60W  
Output: dual switched  
Output: dual simultaneous  
Two position switch- left or right  
Markings on front panel: none  
Three position switch: left, center  
(both) or right  
Markings on front panel: “I II I”  
Sleep function: “Auto-Standby”,  
user selectable to one hour  
Sleep function: via Auto Sleep  
Workstands  
Auto-off: user adjustable to 2.5  
hours  
Auto-Off: fixed at two hours  
Confidential and Proprietary to OK International. © OK International All rights reserved.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hand-piece Guide  
New  
Existing  
Description  
Tips & Cartridges  
Hand-piece  
Hand-pieces  
Hand-piece, soldering cartridge  
Hand-piece, soldering tip  
MFR-HSR  
MFR-HPS  
MFR-HPT  
MFR-H1-SC  
MFR-H2-ST  
MFR-H4-TW  
SFP & RFP  
SFV  
Hand-piece, tweezers cartridge  
TFP  
Design Change of New Hand-pieces  
The new hand-pieces, MFR-H1-SC, MFR-H2-ST & MFR-H4-TW, do not contain the motion switch which  
detects movement and activates the “Auto-Standby” or “Auto-Off” modes in the existing model, MFR-PS1K.  
Backwards Compatibility: New Hand-pieces to Old Power Supply  
The new hand-pieces can be used with the old power supplies (MFR-PS1K) but MUST also include an Auto  
Sleep Workstand (WS1). NOTE: When the new hand-pieces are used with the MFR-PS1K, the “Auto-Off”  
function will not function. WHILE THE NEW HAND-PIECES CAN BE USED WITH THE EXISTING POWER  
SUPPLY (MFR-PS1K), IT IS NOT RECOMMENDED.  
Forward Compatibility: Old Hand-pieces to New Power Supply  
The new power supply (MFR-PS2200) will operate all of the old hand-pieces. HOWEVER, the old hand-  
pieces must use Auto Sleep Workstands to retain the "sleep" function.  
Confidential and Proprietary to OK International. © OK International All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Upgrade Kits  
New  
Upgrade  
Kit  
Existing  
Upgrade Kit  
Hand-piece  
Workstand  
MFR-H1-SC: hand-piece, WS1: Sleeper workstand,  
solder cartridge black cradle  
MFR-SRC-AD  
MFR-UK1  
MFR-H2-ST: hand-piece, WS1: sleeper workstand,  
solder tip black cradle  
MFR-H4-TW: hand-piece, MFR-WSPT: workstand,  
precision tweezers black cradle  
MFR-PST-AD  
MFR-PTZ-AD  
MFR-UK2  
MFR-UK4  
Upgrade Kits allow the user to add hand-pieces and workstands as needed.  
There is no financial “penalty” for adding to an existing system.  
Confidential and Proprietary to OK International. © OK International All rights reserved.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Convection Oven H 4784 BP User Manual
MTD Lawn Mower 111 500R000 User Manual
MTD Snow Blower 312 980I000 User Manual
MTX Audio Stereo Amplifier TA3202 User Manual
NEC Computer Monitor PlasmaSync 3300 User Manual
NXP Semiconductors Car Amplifier TDA8560Q User Manual
Onkyo Stereo Receiver HT R510 User Manual
Panasonic CD Player CQ 4330U User Manual
Panasonic CRT Television CT 27G22 User Manual
Panasonic Satellite TV System M0212 0 User Manual