O2 DSL Router Classic
Quick start guide
Overview of the package contents and the necessary installation information
You will require the following components to set up and configure your O2 DSL Router Classic. Please note that the O2 DSL Router Classic
will only work once your telephone line has been activated. Please see your welcome letter for the activation date.
Telephone outlet
TAE outlet (F)
Power outlet
B
C
O2 DSL Router
Classic1
Power supply unit
with power cable
DSL cable
2 adaptors for
phone/fax
A
B
C
D
ON/OFF switch
RESET
A
E
D
Ethernet/LAN
cable
O2 DSL Starter CD
O2 DSL manual
Welcome letter
(received in advance)
E
F
G
H
Phone/fax (analogue)
Computer
Tip: You will find English and Turkish versions of the quick start guide as PDF documents
on the O2 DSL Starter CD in the »Handbücher« folder.
Setting up and connecting the O2 DSL Router Classic
Please only use your O2 DSL Router Classic in conjunction with your O2 DSL connection.
2
1
Connecting the DSL router to the power supply
Connecting the DSL router to the telephone socket
Connect the power cable B to the DSL router A . Then plug the
Connect the small connector on the DSL cable C to the grey DSL connector
on the DSL router. Now insert the other end of the DSL cable into the
telephone outlet, which is labelled with an (F) or a telephone symbol.
A
power supply unit into a power outlet.
Turn the DSL router on using the ON/OFF switch.
B
The DSL router will now establish a DSL connection. During this time, the
LEDs marked »DSL« and »INTERNET« will flash in succession.
C
Once the blue LED lamp marked »POWER« is continuously illuminated,
the DSL router is ready for use.
Once the »DSL« LED is permanently illuminated and the »INTERNET« LED
flashes, the DSL router has successfully established the internet connection.
Note: This process may take up to 1 minute.
Tip: When setting up the DSL router, please follow the safety notes
in the manual.
Note: This process may take up to 3 minutes.
3
4
Connecting the phone/fax to the DSL router
Connecting the DSL router to the computer
Please wait until the blue »PHONE 1« and »PHONE 2« LEDs are
permanently illuminated. You can now connect your phone/fax.
The DSL router and computer are connected via LAN (with Ethernet cable).
Connect the Ethernet/LAN cable E to one of the yellow Ethernet
connections marked 1–4on the DSL router. Connect the second yellow
plug on the cable to the network connection port on your computer.
E
Note: This process may take between 3 and 5 minutes.
Your phone/fax is connected directly to the DSL router and not to the
telephone socket.
Typ 1
Typ 2
If your telephone connector cable has a Type 1 plug (see top picture),
connect this plug directly to one of the two DSL router connectors marked
»PHONE 1« or »PHONE 2«.
If your telephone connection cable has a Type 2 plug, please use one of the
adapters supplied
as shown in the adjacent picture.
D
Tip: Connect the phone to the adapter via socket (F); fax via socket (N).
D
Your phone/fax is now ready to use.
1 The O2 DSL Router Classic only works with an O2 DSL tariff from O2 Germany. If you want to use it with a
different DSL provider, the integrated calling function will not be available.
Please turn over
Download from Www.Somanuals.com. All Manuals Search And Download.
|