NotaTech Switch 8000SeriesI O User Manual

8000 Series I/O

Product Catalog

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

8000 Series I/O

Product Catalog

Page

Contents

Family Overview

Module Data Sheets

Analog Input Modules

ꢀ0

ꢀꢀ

ꢀꢂ

ꢀ4

• NT-8ꢀ0ꢀ-HI-TX 8-channel AI, 4-ꢁ0mA with HART for ꢁ- or 4-wire

• NT-8ꢀ0ꢂ-AI-TX 8-channel AI, 4-ꢁ0mA for ꢁ- or 4-wire

• NT-8ꢀꢀ9-VI-05 8-channel Voltage Input, ꢀ-5Vdc

• NT-8ꢀꢂꢁ-AI-UN 8-channel isolated AI, 4-ꢁ0mA with HART, Thermocouple, RTD,Voltage

• NT-8ꢀ05-TI-TC 4-channel THC/mV input

• NT-8ꢀ06-TI-RT 4-channel RTD input

Analog Output Modules

• NT-8ꢀ0ꢁ-HO-IP 8-channel AO, with HART for 4-ꢁ0mA

• NT-8ꢀ04-AO-IP 8-channel AO, 4-ꢁ0mA

ꢀ5

ꢀ6

Digital Inputs

ꢀ7

ꢀ8

ꢀ9

ꢁ0

ꢁꢀ

ꢁꢁ

ꢁꢂ

ꢁ4

• NT-8ꢀ09-DI-DC 8-Channel DI, ꢁ4VdC isolated, sinking

• NT-8ꢀꢀ0-DI-DC 8-channel DI, ꢁ4Vdc non-isolated, module powered

• NT-8ꢀꢁꢀ-DI-DC ꢀ6-channel DI, ꢁ4Vdc non-isolated, module powered

• NT-8ꢀꢁꢁ-DI-DC ꢀ6-channel DI, ꢁ4Vdc isolated, sinking

• NT-8ꢀꢀꢀ-DI-AC 8-channel DI, ꢀꢀ5Vac isolated, sinking

• NT-8ꢀꢀꢁ-DI-AC 8-channel DI, ꢀꢀ5Vac non-isolated, module powered

• NT-8ꢀꢀꢂ-DI-AC 8-channel DI, ꢁꢂ0Vac isolated, sinking

• NT-8ꢀꢀ4-DI-AC 8-channel DI, ꢁꢂ0Vac non-isolated, module powered

Digital Outputs

ꢁ5

ꢁ6

ꢁ7

ꢁ8

• NT-8ꢀꢀ5-DO-DC 8-channel DO, ꢁ-60Vdc non-isolated, module powered

• NT-8ꢀꢀ7-DO-DC 8-channel DO, ꢁ-60Vdc isolated, unpowered

• NT-8ꢀꢀ6-DO-AC8-channel DO, ꢁ0-ꢁ50Vac non-isolated, module powered

• NT-8ꢀꢀ8-DO-AC8-channel DO, ꢁ0-ꢁ50Vac isolated, unpowered

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

8000 Series I/O

Product Catalog

Overview

Key Features

The NovaTech 8000 Series I/O is the newest remote I/O

family native to the D/3® Process Automation System

(PAS). It is the preferred I/O for new installations and

it can replace the older NovaTech 16000 series I/O

in existing PCM cabinets, using existing field wiring

connected to new termination panels with existing

connectors.

• Wide range of input and output types, in any mix

• Up to 64 I/O modules per node

• Up to 50 nodes per EthernetMPC card

• Wide operating temperature range, -40 to +70°C

• General-purpose and intrinsically-safe I/O within a

single node

• Redundant Local Area Networks (LAN) and power

supplies supported

With its -40 to +70° temperature range and G3 cor-

rosive coating, the NovaTech 8000 Series I/O is an I/O

system designed for field mounting. It connects to

conven-tional and smart field devices through multi-

channel I/O modules. The modules communicate, via

a fast internal bus, with redundant Ethernet Bus Inter-

face Modules (EBIMs) which provide dual-redundant

high speed Ethernet data connections to the D/3®.

• High channel density

• Zone 2 and Division 2 hazardous area mounting as

standard

• I/O module hot-swapping even in Zone 2 and Divi-

sion 2

• HART® pass-through supported

• Rugged construction, optimized for true field mount-

ing

• Integrated (per-channel) fusing and loop-disconnect

facility

• Bussed field power on carriers eliminates daisy-chain

wiring at field terminals

• Sophisticated mechanical keying system eliminates

risk to plant and personnel

Up to 64 I/O modules can be supported within a single

8000 Series node, and each module has between 4

and 16 channels. An EthernetMPC card can support

up to 50 nodes. With the availability of intrinsically

safe modules, 8000 Series I/O provides a solution for

both general purpose and hazardous area applications

- even within the same node.

8000 Series connects to both conventional (such as

4-20mA) and smart field devices. It allows the cost

benefits of fieldbus to be enjoyed with existing field

instruments—ideal for plant upgrades and expan-

sions. Pass-through of HART® information between

HART® instruments and the D/3® network is possible.

Designed for use with PCM 4100 or PCM 4200 PCI-

based PCMs, it requires an Ethernet Multi Protocol

Controller (EthernetMPC) card and D/3® version 12.2-2

or higher.

8000 Series nodes can be located within, and con-

nected into, a hazardous area where there is a risk

of explosion from flammable gases. The standard,

general purpose system is approved for operation in a

Zone 2 or Class I, Division 2 hazardous area, with field

devices in a similarly classified area. I/O modules with

intrinsically safe field circuits can be connected to

certified devices in Zone 0 and Class I, II, III, Division 1

hazardous areas.

Enclosures are also available for application where the

Series 8000 node must be located in a Zone 1 or Divi-

sion 1 area—consult NovaTech for availability.

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8000 Series I/O

Product Catalog

Node Architecture

lation time by removing the need to make daisy chain

wiring connections at the field terminals of each I/O

module.

An 8000 Series node comprises single or redundant

Ethernet Bus Inter-face Modules, up to 64 I/O modules,

field terminals, and associated power supplies.

Node Operation

A schematic node architecture is shown below. In-

formation from the I/O modules is transferred to and

from the communication module (EBIM) via the Rail-

bus. The Railbus is a fast, serial data bus with parallel

module addressing and extends over the full length of

the node. The parallel address architecture means that

each I/O module position has a unique address which

eliminates the need to ‘train’ modules during installa-

tion.

A typical request for data from the field might happen

as follows:

The D/3® PAS requires the temperature from a par-

ticular thermocouple input at a particular node and

transmits a signal on the I/O LAN. There are several

Series 8000 nodes on the I/O LAN, but the EBIM at the

chosen node recognizes its own node address, and

acknowledges the request.

Power for the node is provided by integrated power

supply modules; these convert the locally available

power source into a regulated internal supply rail. This

rail energizes the EBIM and all Railbus communication

between the EBIM and I/O modules.

At each node, the input modules constantly monitor,

linearize and digitize their respective field signals,

and make them available to scanning on the node’s

internal bus (Railbus).

The EBIM continually scans the I/O modules via the

Railbus, and builds up a map of the values of the input

variables, ready for the PCM to read. These are con-

verted into the LAN protocol and placed on the LAN

by the EBIM, together with acknowledgement signals.

The D/3 then interprets the signal and reconstructs

the temperature reading.

For some I/O module types—such as those with

low-power and intrinsically safe field circuits—it also

provides power for the field wiring. Where additional

power is required for field devices (such as high cur-

rent AC circuits), power can be provided by means

of cabled connections from each module to external

relays. This Bussed Field Power facility reduces instal-

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8000 Series I/O

Product Catalog

NovaTech 8000 Series I/O Components

Modules

Field Terminals

I/O modules transfer signals to and from field instru-

ments. Input modules receive signals from transmit-

ters and sensors and convert them into a digital form

for presentation to the EBIM. Output modules receive

commands from the EBIM and transfer them to actua-

tors. A wide range of modules is available, including

types for low-level instrumentation, AC circuits, and

intrinsically safe signals. I/O modules typically have 4,

8, or 16 field channels.

Field terminals provide the interface between the

I/O modules and the field wiring. They include fusing

and loop disconnect as options. A mechanical keying

system prevents an I/O module from being connected

to the wrong type of field terminal. Field terminals

mount onto the module carrier, one to each I/O

module. They are clamped firmly by the I/O module

to form an electrical and mechanical assembly of high

integrity. They may be replaced in service without

removing carriers or disturbing the operation of other

modules.

Carriers

Carriers allow the 8000 Series I/O to mount onto a flat

panel or T- or G-section DIN rail. They support and in-

terconnect the EBIM, power supplies, I/O modules and

field terminals, and carry the address, data and power

lines of the internal Railbus. They provide termination

points for the LAN and field wiring cable screens and

can also distribute bussed field power to the I/O mod-

ules. I/O module carriers support eight I/O modules.

Power Supplies

8000 Series I/O power supplies accept locally available

unregulated power and provide a regulated supply

for the EBIM and I/O modules. Supply redundancy is

supported. The system power supply at an 8000 Series

node converts the local DC supply to power the node,

and can also provide field power for I/O modules with

low-level field circuits. Where heavy-current or AC

mains circuits are handled by the I/O modules, the

8000 Series method for distributing field power avoids

complex wiring at the field terminal and minimizes the

backplane/carrier wiring.

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8000 Series I/O

Product Catalog

Ethernet Bus Interface Module (EBIM)

NovaTech 8000 Series I/O uses the Ethernet Bus Inter-

face Module (EBIM) to provide a high speed Ethernet

data connection to the D/3®. The EBIMs communicate

using a propri-etary protocol over Ethernet at speeds

of 10/100MB to the D/3® PCMs.

NovaTech 8000 Series I/O Support

8000 Series I/O offers a variety of I/O boards and signal

conditioning termination panels suitable for virtually

every standard process sensor and actuator. Details

on signal conditioning termination panels, as well as

their associated I/O function boards, can be obtained

in individual specification sheets. The standard D/3®

configuration supports such I/O signals as:

• Analog Inputs: 4-20 mA, 10-50 mA, 0-10V (program-

mable ranges of 0-50mV, 0-100mV, 0-1V and 0-10V),

100 ohm platinum RTDs, thermocouples

• Pulse Train Inputs up to 50 Hz @ +10 to +32 VDC and

95 to 130 VAC

• Digital and Pulse Outputs:

• DC Output +5, +12, +24, and +5 to +60 VDC

• AC Output 12 to 140 VAC

• Pulse Output 2 msec. to 3.3 sec. @ +5, +12, +24, and

+5 to +60 VDC

• Pulse Output 10 msec. to 11 min. @ +5, +12, +24,

and +5 to +60 VDC

• Pulse Output 2 msec. to 3.3 sec. @ 12 to 140 VAC

• Pulse Output 10 msec. to 11 min. @ 12 to 140 VAC

• Analog Outputs: 4-20 mA, 10-50 mA, 0-10V

• Digital and Pulse Inputs:

• Contact Closures +5, +12, +24 and +10 to +32 VDC

• Contact Closures 95 to 130 VAC

• Pulse Train Inputs up to 100 KHz @ +5, +12, +24 VDC

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8KIO_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Channel Analog Input

4–20 mA with HART®

. 8 single-ended 4-20 mA input channels

. Non-incendive field circuits

. HART pass-through

. HART variable and status reporting

. 2- or 4-wire transmitters

. open and short circuit detection

. 24 V dc bussed field power required

Module Speciﬁcations

Inputs

NovaTech 8000 Series I/O Family

Number of channels ...............................................8, single-ended

Nominal signal range (span) ..........................................4 to 20 mA

Full signal range.................................................................1 to 23 mA

Line fault detection

Conﬁgurable Parameters

Input filter time constant .................................user defined value

Input dead zone .................................................user defined value

Drive on failsafe............................. disabled /upscale /downscale

Channel status.......................................................... active /inactive

Short circuit current .....................................................> 23.5 mA

Open circuit current ......................................................< 0.5 mA

Output voltage (@ 20mA).............................................13.5 V (min.)

Output current ..............................................................32 mA (max.)

Accuracy (over temp range) ................................... 0.1% of span

Resolution ..................................................................................16 bits

Repeatability ................................................................0.05% of span

Isolation

Image Description

HART variable and status reporting ................... enable /disable

Response Time

Signal change to availability on Railbus

4–20 mA mode .........................................................27 ms (max.)

HART mode......................................................0.75 s per channel

(any channel to Railbus) .................................................100 V ac

(between channels)................................................................none

Safety

FM non-incendive field wiring parameters (each channel)

V_oc= 28.7 V; I_sc= 33 mA; C_a= 0.17 µF; L_a= 11.0 mH

Power Supplies

Railbus (12V) current .....................100 mA (typ.), 150 mA (max.)

Bussed Field Power 2-wire Tx...................................300 mA (max.)

(@ 24 V dc 10%) 4-wire Tx.........................................60 mA (max.)

Mechanical

Module Key Code .............................................................................A1

Module width ............................................................................42 mm

Weight............................................................................................200 g

Field Terminals (2-WIRE TX)

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8602-FT-ST

Standard

NT-8604-FT-FU

Fused

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NI

Non-incendive

NT-8603-FT-FU

Non-incendive

Field Terminals (4-WIRE TX)

Field Wiring

Recommended Compatible

Field Terminal

NT-8615-FT-4W

Field Terminal

General Purpose

Class 1, Div 2

or Zone 2 hazard-

ous area

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8101_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Analog Input

4–20 mA

. 8 single-ended 4-20mA input channels

. Non-incentive field circuits

. 4-20mA

. 2- or 4-wire transmitters

. Open and short circuit detection

. 24Vdc bussed field power required

Module Speciﬁcations

Inputs

Number of channels ...............................................8, single-ended

Nominal signal range (span) ..........................................4 to 20 mA

Full signal range.................................................................1 to 23 mA

Out of range alarm

NovaTech 8000 Series I/O Family

Conﬁgurable Parameters

Input filter time constant .................................user defined value

Input dead zone .................................................user defined value

Drive on failsafe............................. disabled /upscale /downscale

Lower threshold.............................................................> 23.5 mA

Upper threshold .............................................................< 0.5 mA

Output voltage (@ 20 mA)............................................13.5 V (min.)

Output current ..............................................................32 mA (max.)

Accuracy (over temp range) ................................... 0.1% of span

Resolution ..................................................................................16 bits

Repeatability ................................................................0.05% of span

Isolation

Channel status.......................................................... active /inactive

Image Description

Response Time

Signal change to availability on Railbus .................27 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

..................V_oc= 28.7 V; I_sc= 33 mA; C_a= 0.17 µF; L_a= 11.0 mH

(any channel to Railbus) .................................................100 V ac

(between channels)................................................................none

Power Supplies

Railbus (12V) current .....................100 mA (typ.)/150 mA (max.)

Bussed Field Power ..................................2-wire Tx 300 mA (max.)

(@ 24 Vdc 10%) 4-wire Tx 60 mA (max.)

Mechanical

Module Key Code .............................................................................A1

Module width ............................................................................42 mm

Weight............................................................................................200 g

Field Terminals (2-wire TX)

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8602-FT-ST

Standard

NT-8604-FT-FU

Fused

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NI

Non-incendive

NT-8603-FT-FU

Non-incendive

Fused

Field Terminals (4-wire TX)

Field Wiring

Recommended Compatible

Field Terminal

NT-8615-FT-4W

Field Terminal

General Purpose

Class 1, Div 2

or Zone 2 hazard-

ous area

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8103_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Analog Input

1–5 V

. 8 single-ended input channels

. Non-incendive field circuits

. 1–5 V inputs open circuit and short circuit detection

. 24 V dc bussed field power required

Module Speciﬁcations

Inputs

Number of channels ...............................................8, single-ended

Nominal signal range (span) ................................................1 to 5 V

Full signal range ...........................................................0.19 to 5.64 V

Input impedance.........................................................................2 MΩ

Out of range alarm

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code ............................................................A1

Module width .............................................................42 mm

Weight..........................................................................200 g

Lower threshold ................................................................< 0.19 V

Upper threshold ................................................................> 5.64 V

Accuracy (over temp range) ................................... 0.1% of span

Resolution ..................................................................................16 bits

Repeatability ................................................................0.05% of span

Isolation (any channel to Railbus) .....................................100 V ac

(between channels)................................................................none

Image Description

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8615-FT-4W

4-wire transmitter

Conﬁgurable Parameters

Input filter time constant .................................user defined value

Input dead zone .................................................user defined value

Drive on failsafe............................. disabled /upscale /downscale

Channel status.......................................................... active /inactive

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8615-FT-4W

4-wire transmitter

Response Time

Signal change to availability on Railbus .................27 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

..................V_oc= 28.7 V; I_sc= 33 mA; C_a= 0.17 µF; L_a= 11.0 mH

Power Supplies

Railbus (12V) current .....................100 mA (typ.)/150 mA (max.)

Bussed Field Power ...................... 60 mA (max.) at 24 Vdc 10%

3AFE AREA

OR :ONE ꢀꢁ$IV ꢀ HAZARDOUS AREA

/THER

CHANNELS

-58

!ꢁ$

#HANNEL ꢂ OF ꢃ

ꢂnꢄ6

2AILBUS

ꢀꢁ 6DC

"USSED &IELD 0OWER

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8119_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ0

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Isolated Universal

Analog Input

4-20mA with Thermocouple, RTD, Voltage

• 8 isolated, universal, input channels

• Configurable on a channel by channel basis:

4-20mA, THC, RTD, resistance & voltage

• 250V ac rms channel to channel isolation

• Thermocouple types B, E, J, K, N, R, S, T, W3, W5, Russian

K, Russian L

• RTD types Pt100, jPt100, Pt200, Pt500, Ni120, Cu10

• Volt input types 120mV, 0-1V, 0-5V, 1-5V, 0-10V, 10V

• 2 or 3-wire RTDs

• 2 or 4-wire transmitters

NovaTech 8000 Series I/O Family

• Non-incendive field circuits

• 24 V dc bussed field power required

Resolution .......................................................................14 bits (typ.)

Optional open circuit bleed current .................... 1.2uA (nom.)

Open circuit detection time .....................................................1 sec

Module Speciﬁcations

Inputs

......................................................(with < 0.5 µF cable capacitance)

Image Description

Number of configurable channels .................................8 isolated

RTD Input (2 or 3 Wire)

4-20mA Inputs

RTD types ....................Pt100, Pt200, Pt500, Cu10, Ni120; jPt100

Maximum wire resistance ...................................................40 ohms

Calibration accuracy 3-wire

Nominal signal range (span) ...........................................4 to 20mA

Full signal range (FSR).......................................................0 to 25mA

Output voltage (@ 20mA) ............................................13.5 V (min.)

Output current (linear operation) ............................25 mA (max.)

Short circuit current (max.) .................................75 mA for 100ms

(Output turns off after ~100ms at more than 25mA)

Calibration accuracy

10°C to 40°C ........................................................... 0.1% of span

–40°C to 70°C ........................................................ 0.2% of span

RTD excitation current .....................selected for ~0.2 mW at 0°C

Resolution .......................................................................14 bits (typ.)

Open circuit detection time .....................................................1 sec

......................................................(with < 0.5 µF cable capacitance)

10°C to 40°C ............................................................. 0.1% of FSR

–40°C to 70°C ........................................................... 0.3% of FSR

Resolution .......................................................................15 bits (typ.)

Repeatability ................................................................0.05% of span

Resistance Input (2 or 3 Wire)

Input resistance range (span) ...................................0 to 110, 280,

...............................................................................470 and 1000 ohms

Calibration accuracy 3-wire

Thermocouple Inputs

THC Types ....B, E, J, K, N, R, S, T, W3, W5, Russian K, Russian L

Calibration Accuracy

10°C to 40°C ........................................................... 0.2% of span

–40°C to 70°C ........................................................ 0.4% of span

Maximum wire resistance ...................................................40 ohms

Resistance excitation current ..selected for ~1.0 mW at max R

Resolution .......................................................................14 bits (typ.)

10°C to 40°C................................................. 0.1% of span (typ.)

–40°C to 70°C .............................................. 0.2% of span (typ.)

Cold junction compensation error †< 1°C (–40°C to + 70°C)

† C J compensation located in recommended field terminal

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Isolated Universal

Analog Input

4-20mA with Thermocouple, RTD, Voltage

Field Terminals

Voltage Input

Nominal signal range 1 (span) .............................. 120 mV, 0-1 V,

.........................................................................0-5V, 1-5V, 0-10V, 10V

Resolution .......................................................................14 bits (typ.)

Field Wiring

Recommended Compatible

Field Terminal

All Purpose

THC

NT-8608-FT-RT

(no internal CJ)

8607-FT-TC (see

note) (internal CJ)

Conﬁgurable Parameters

Sensor type ................................................................user selectable

Input dead zone .................................................user defined value

Channel status ...........................................................active/inactive

Filter/sample rates ....................................................user selectable

NT-8606-FT-TC

(internal CJ)

8608-FT-RT (see

note) (no internal

CJ)

NOTE: For further advice on field terminals for this module

and for operations with more than one type of sensor, see

NovaTech 8000 I/O Hardware User’s Guide

General Speciﬁcations

Common mode rejection (using 50/60Hz filter) ...........................

.............................................................................> 120 dB @ 50/60 Hz

Series mode rejection (using 50/60Hz filter) .................................

................................................................................> 65 dB @ 50/60 Hz

Maximum input voltage (except current I/P) ...................... 25V

Common mode voltage between channels ...........250 V ac rms

Isolation

Image Description

(channel to channel) ...............................................250 V ac rms

(any channel to Railbus) .........................................250 V ac rms

(any channel to Bussed Field Power) ..................250 V ac rms

(Railbus to Bussed Field Power) ............................150 V ac rms

Input filter frequency response .....................time constant 4 ms

Input impedance ..............................................................> 1 M ohm

Data Format ...............0 to 66535 corresponds to selected span

Open circuit detection ...........................................................< 1 sec

......................................................(with < 0.5 µF cable capacitance)

Safety

FM non-incendive field wiring parameters (each channel)

...........................Voc=20 V; Isc = 75mA; Ca= 0.61 µF; La= 11.3mH

Power Supplies

Railbus (12V) current ....................................................60 mA (typ.)

.........................................................................................125 mA (max.)

Bussed Field Power @ 24 V dc 10%

All configurations - except 4/20mA with excitation ..125 mA

(max.)

4/20mA with excitation ............................................300 mA (max.)

Mechanical

Module Key Code ...........................................................................A1*

Module width .............................................................................42mm

Weight ............................................................................................185g

* WARNING If this module is being used in an application that

requires 250V ac rms channel-to-channel isolation, it must be

replaced only with an A1 key code module that has equiva-

lent, or better, channel-to-channel isolation rating.

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀꢁ

warranty. DS_8132_0607

Download from Www.Somanuals.com. All Manuals Search And Download.

4-channel Analog Input

Thermocouple and mV

. 4 thermocouple or mV* input channels

• Cold junction compensation

Module Speciﬁcations

Inputs

Number of channels ..........................................................................4

THCs types

.....................B,E,J,K,N,R,S, or T to EN 60584-2, IEC584-2, BS4937;

.............................................................................................W3 and W5

NovaTech 8000 Series I/O Family

Input Ranges

Conﬁgurabe Parameters

Input Type

Range

Sensor type ................................................................user selectable

Input dead zone (hysteresis)............................user defined value

Selectable input filtering ....off /2 reading avge./running avge.

Drive on open circuit fault......... disabled /upscale /downscale

Channel status...........................................................active/ inactive

0 to 120 mV

Thermocouples: B

0 to 1820 °C

– 270 to + 1000 °C

– 210 to + 1200 °C

– 270 to + 1372 °C

– 50 to + 1768 °C

– 270 to + 400 °C

0 to + 2315 °C

K & N

R & S

Response Times

Signal change to availability on Railbus

...........................................................................................120 ms (min.)

..........................................................................................420 ms (max.)

O/C sensor detection.................................................................≤ 10 s

W3 & W5

Calibration Accuracy

Safety

mV input................................... 0.2% of span (– 40 to + 70 °C)

...................................................... 0.1% of span(+10 to + 40 °C)

THC input ...........................dependent on thermocouple type-

Cold junction compensation error†.......< 1°C (–40 to + 70 °C)

Resolution ..........................................................15 bits plus sign bit

Common mode rejection................................> 80 dB @ 50/60 Hz

Series mode rejection.......................................> 40 dB @ 50/60 Hz

Maximum input voltage ......................................................... 4.0 V

Common mode voltage between channels.......... 4.5 V (max.)

Isolation (any channel to Railbus) ............................250 V ac rms

Open circuit bleed current..................................... 0.5 µA (nom.)

FM non-incendive field wiring parameters (each channel)

...............Voc = 10.5 V; Isc = 3.6 mA; Ca = 14.9 µF; La = 1000 mH

Power Supplies

Railbus (12V) current...................................................150 mA (typ.)

.........................................................................................200 mA (max.)

Bussed Field Power .......................................................not required

Mechanical

Module Key Code .............................................................................C1

Module width ............................................................................42 mm

Weight............................................................................................200 g

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8605-FT-TC

THC

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8605-FT-TC

THC

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8105_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

4-channel Analog Input

RTD and Ω

. 4 RTD or resistance* source inputs

. Function defined by configuration

. 2-, 3- or 4-wire RTD types accommodated

Module Speciﬁcations

Inputs

Number of channels ..........................................................................4

RTD input (2,3, or 4 wire)

....................................................Pt100 to BS1904/DIN43760/IEC 75

........................................................Ni120; jPt100 to JIS C1604: 1989

NovaTech 8000 Series I/O Family

Input Ranges

Conﬁgurabe Parameters

Sensor type....................................................................user selection

Input deadzone ..................................................user defined value

Selectable input filtering....off /2-reading avge./running avge.

Input Type

Resistance

Range

Consult NovaTech for availability

– 200 to + 850 °C

RTDs: Pt100

jPt100

Drive on open circuit fault................................. disabled /upscale

Image Description

– 200 to + 510 °C

Channel status...........................................................active/ inactive

Offset (2-wire RTD mode).................................user defined value

Ni120

– 60 to + 320 °C

Response Times

Input resistance range (span)..........................................0 to 500 Ω

Accuracy (% of span)

Signal change to availability on Railbus

...........................................................................................180 ms (min.)

..........................................................................................840 ms (max.)

O/C sensor detection.................................................................≤ 10 s

Tamb

(RTD & Ω inputs)

25°C

0.05%

0.1%

0.2%

+10 to + 40°C

– 40 to + 70°C

Safety

FM non-incendive field wiring parameters (each channel)

...............V_oc= 10.5 V; I_sc= 3.6 mA; C_a= 14.9 µF; L_a= 1000 mH

RTD excitation current ..............................................200 μA (nom.)

Resolution ..........................................................15 bits plus sign bit

Common mode rejection................................> 80 dB @ 50/60 Hz

Series mode rejection.......................................> 40 dB @ 50/60 Hz

Isolation (any channel to Railbus) .............................250 V ac rms

Open circuit bleed current.........................................0.5 μA (nom.)

Power Supplies

Railbus (12V) current...................................................150 mA (typ.)

.........................................................................................200 mA (max.)

Bussed Field Power .......................................................not required

Mechanical

Module Key Code .............................................................................C1

Module width ............................................................................42 mm

Weight............................................................................................200 g

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8606-FT-RT

RTD

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8606-FT-RT

RTD

*Consult NovaTech for availability.

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8106_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ4

Download from Www.Somanuals.com. All Manuals Search And Download.

8 Channel Analog Output

4–20 mA with HART®

. 8 single-ended 4-20 mA output channels

. Non-incendive field circuits

. HART pass-through

. HART variable and status reporting

. Valve positioners and remote indicators, etc.

. Open circuit detection on each channel

. 24 V dc bussed field power required

Module Speciﬁcations

Inputs

NovaTech 8000 Series I/O Family

Number of channels ...............................................8, single-ended

Nominal signal range (span) ..........................................4 to 20 mA

Full signal range.................................................................1 to 23 mA

Open loop detection threshold ...............................0.7 0.25 mA

Output compliance ..............................20 mA at 21.6 V dc supply

....................................................................................(into 700 Ω load)

Accuracy (over temp range) ................................. 0.25% of span

Resolution ..................................................................................12 bits

Isolation

Response Time

Signal change to availability on Railbus

4–20 mA mode .........................................................25 ms (max.)

HART mode......................................................0.75 s per channel

Image Description

Safety

FM non-incendive field wiring parameters (each channel)

..................V_oc= 28.7 V; I_sc= 33 mA; C_a= 0.17 µF; L_a= 11.0 mH

(any channel to Railbus) .................................................100 V ac

(between channels)................................................................none

Power Supplies

Railbus (12V) current ..................................................100 mA (typ.)

.........................................................................................150 mA (max.)

Bussed Field Power .................... 300 mA (max.) at 24 Vdc 10%

Conﬁgurable Parameters

Initialization state..................................................predefined value

Drive on fail-safe ................................predefined value/last value

Channel status.......................................................... active /inactive

HART variable and status reporting.....................enable /disable

Mechanical

Module Key Code .............................................................................A4

Module width ............................................................................42 mm

Weight............................................................................................200 g

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

General Purpose

NT-8602-FT-ST

Standard

NT-8604-FT-FU

Fused

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NI

Non-incendive

NT-8603-FT-FU

Non-incendive

3AFE AREA

OR :ONE ꢀꢁ$IV ꢀ HAZARDOUS AREA

2EGULATOR

/THER

CHANNELS

((#

-58

$ꢁ!

#HANNEL ꢂ OF ꢃ

ꢁꢄꢀꢅM!

2AILBUS

)

ꢀꢁ 6DC

"USSED &IELD 0OWER

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8102_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ5

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Analog Output

4–20 mA

. 8 single-ended outputs

. 4–20 mA

. For I/P converters and remote indicators, etc

. Open circuit detection is provided on each channel

. 24 V dc bussed field power required

Module Speciﬁcations

Outputs

Number of channels ...............................................8, single-ended

Nominal signal range (span) ..........................................4 to 20 mA

Full signal output range ..................................................1 to 23 mA

Open loop detection threshold ...............................0.7 0.25 mA

Output compliance

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code .............................................................................A4

Module width ............................................................................42 mm

Weight............................................................................................200 g

...................................20 mA at 21.6 V dc supply (into 700 Ω load)

Accuracy (over temp range) ................................. 0.25% of span

Output ripple............................................................< 0.02% of span

Resolution ..................................................................................12 bits

Isolation

Image Description

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

any channel to Railbus ....................................................100 V ac

Field Terminal

General Purpose

NT-8602-FT-ST

Standard

NT-8604-FT-FU

Fused

Conﬁgurable Parameters

Initialization state..................................................predefined value

Drive on fail-safe ..............................predefined value / last value

Channel status..........................................................active / inactive

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NI

Non-incendive

NT-8603-FT-FU

Non-incendive

Fused

Response time

From Railbus command to output change ............25 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

..................V_oc= 28.7 V; I_sc= 33 mA; C_a= 0.17 μF; L_a= 11.0 mH

Power Supplies

Railbus (12V) current ..................................................100 mA (typ.)

.........................................................................................150 mA (max.)

Bussed Field Power......................300 mA (max.) @ 24 V dc 10%

Quiescent current .....................................................................60 mA

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8104_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ6

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

24 V dc, isolated, sinking

. 8 discrete isolated inputs

. 24 V dc field voltage sources

. User definable input threshold

. Pulse counting option

Module Speciﬁcations

Inputs

Number of channels ...........................................................................8

OFF voltage...........................................................................< 3.2 V dc

ON voltage .............................................................................> 11 V dc

Wetting current ........................................6.3 mA (nom.) @ 24 V dc

Minimum pulse width detected ...............................................3 ms

Maximum switching frequency (no-filtering)....................200 Hz

Maximum voltage

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code..............................................................................B2

Module width ............................................................................42 mm

Weight............................................................................................170 g

Input ......................................................................................30 V dc

Reverse input....................................................................– 25 V dc

Image Description

Field Terminals

Conﬁgurable Parameters

Field Wiring

Recommended Compatible

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

Field Terminal

General Purpose

NT-8602-FT-ST

Standard †

NT-8604-FT-FU

Fused

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NA

Non-arcing †

NT-8611-FT-FU

Non-arcing,

Fused

Response Time

I/O response time

† External fusing of the Field Power supply is recommended

in order to protect the field wiring.

Field event to new data available on Railbus............3 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

........................V_max= 30 V; I_max= 100 mA; C_i= 0 μF; L_i= 0 mH

Power Supplies

Railbus (12V) current......................................................35 mA (typ.)

...........................................................................................55 mA (max.)

Bussed Field Power .......................................................not required

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8109_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ7

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

24 V dc, non-isolated, module powered

. 8 discrete inputs for dry contact switches

. 24 V dc provided on input high side

. Returns commoned internally

. Pulse counting option

. 24 V dc bussed field power required

Module Speciﬁcations

Inputs

Number of channels ...........................................................................8

OFF current ..........................................................................< 0.69 mA

ON current............................................................................> 2.24 mA

Wetting current .................................................................5 mA (typ.)

Minimum pulse width detected ...............................................3 ms

Maximum switching frequency (no-filtering)....................200 Hz

Isolation (any channel to Railbus) .....................................250 V ac

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code..............................................................................B1

Module width ............................................................................42 mm

Weight............................................................................................170 g

Image Description

Field Terminals

Conﬁgurable Parameters

Field Wiring

Recommended Compatible

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

Field Terminal

General Purpose

NT-8602-FT-ST

Standard †

NT-8604-FT-FU

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8601-FT-NI

Non-incendive †

NT-8603-FT-FU

Non-incendive,

fused

Response Time

I/O response time

† External fusing of the field power supply is recommended

in order to protect the field wiring.

Field event to new data available on Railbus............3 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

...................V_oc= 30 V; I_sc= 15.2 mA; C_a= 0.12 μF; L_a= 151 mH

Power Supplies

Railbus (12V) current......................................................35 mA (typ.)

...........................................................................................55 mA (max.)

Bussed Field Power ......................................40 mA, @ 18—36 V dc

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8110_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ8

Download from Www.Somanuals.com. All Manuals Search And Download.

16-channel Discrete Input

24 V dc, non-isolated, module-powered

. 16 input channels for dry contact switches

. 24 V dc provided on input high side

. Returns commoned internally

. Pulse counting option

. 24 V dc bussed field power required

Module Speciﬁcations

Inputs

Number of channels ........................................................................16

OFF current ............................................................................< 0.3 mA

ON current..............................................................................> 1.2 mA

Wetting current .............................................................2.8 mA (typ.)

Minimum pulse width detected ...............................................5 ms

Max input freq in pulse counting mode (no-debounce)100 Hz

Isolation (any channel to Railbus) .....................................250 V ac

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code..............................................................................E1

Module width ...........................................................................42 mm

Weight............................................................................................210 g

Image Description

Field Terminals

Conﬁgurable Parameters

Field Wiring

Recommended Compatible

Field Terminal

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

Field Terminal

General Purpose

NT-8617-FT-NI

16 channel DI

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8617-FT-NI

16 channel DI

Response Time

I/O response time

Field event to new data available on Railbus............5 ms (max.)

Safety

FM non-incendive field wiring parameters (each channel)

..............V_oc= 30 V; I_sc= 3.5 mA; C_a= 0.12 μF; L_a= 1000 mH

Power Supplies

Railbus (12V) current......................................................90 mA (typ.)

.........................................................................................135 mA (max.)

Bussed Field Power.........................................60 mA, @ 18–30 V dc

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8121_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢀ9

Download from Www.Somanuals.com. All Manuals Search And Download.

16-channel Discrete Input

24 V dc, isolated, sinking

. 16 input channels

. 24 V dc field voltage sources

. Individually isolated channels

. User definable input threshold

. Pulse counting option

Module Speciﬁcations

Inputs

Number of channels ........................................................................16

OFF voltage...........................................................................< 3.4 V dc

ON voltage .............................................................................> 11 V dc

Wetting current ........................................2.8 mA (nom.) @ 24 V dc

Minimum pulse width detected ...............................................5 ms

Max input freq in pulse counting mode (no-debounce)100 Hz

Maximum voltage

NovaTech 8000 Series I/O Family

Power Supplies

Railbus (12V) current......................................................90 mA (typ.)

.........................................................................................135 mA (max.)

Bussed Field Power .......................................................not required

Image Description

Mechanical

Input ......................................................................................30 V dc

Reverse input ................................................................. – 25 V dc

Isolation (Any Channel to railbus) .....................................250 V ac

Isolation (channel to channel) ......................................150 V peak

Module Key Code .............................................................................E2

Module width ............................................................................42 mm

Weight............................................................................................210 g

Conﬁgurable Parameters

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Pulse counting ..........................................................enable /disable

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

NT-8617-FT-NI †

16 channel DI

Field Terminal

Response Time

General Purpose

I/O response time ............................................................5 ms (max.)

(Field event to new data available on Railbus)

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8617-FT-NI †

16 channel DI

Safety

FM non-incendive field wiring parameters (each channel)

......................V_max= 30 V; I_max= 100 mA; C_i= 0 µF; L_i= 0 mH

† External fusing of the Field Power supply is recommended

in order to protect the field wiring.

3AFE AREA

OR :ONE ꢀꢁ$IV ꢀ HAZARDOUS AREA

NNE

L ꢀ

F ꢀ

ꢁ

24V

2AILBUS

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8122_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ0

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

115 V ac, isolated, sinking

. 8 discrete inputs

. 115 V ac field voltage sources

. User definable input threshold

. Pulse counting option

Module Speciﬁcations

Inputs

Number of channels ...........................................................................8

OFF voltage............................................................................< 34 V ac

ON voltage .............................................................................> 84 V ac

Wetting current .........................................2 mA (nom.) @ 115 V ac

Max. input voltage ................................................................130 V ac

Frequency ............................................................................50 / 60 Hz

NovaTech 8000 Series I/O Family

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

NT-8602-FT-ST

Standard †

Field Terminal

NT-8604-FT-FU

Fused

Conﬁgurable Parameters

Image Description

General Purpose

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8610-FT-NA

Non-arching †

NT-8611-FT-FU

Non-arching,

fused

† External fusing of the Field Power supply is recommended

in order to protect the field wiring.

Response Time

I/O response time

Field event to new data available on Railbus....33 ms (max.)

Power Supplies

Railbus (12V) current......................................................40 mA (typ.)

...........................................................................................60 mA (max.)

Bussed Field Power .......................................................not required

Mechanical

Module Key Code..............................................................................E4

Module width ............................................................................42 mm

Weight............................................................................................170 g

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8111_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

115 V ac, non-isolated, module powered

. 8 discrete inputs for dry contact switches

. 115 V ac provided on input high side

. Returns commoned internally

. Pulse counting option

. 115 V ac Bussed Field Power required

Module Speciﬁcations

Inputs

Number of channels ...........................................................................8

OFF current ..........................................................................< 0.56 mA

ON current..............................................................................> 1.4 mA

Wetting current .........................................2 mA (nom.) @ 115 V ac

NovaTech 8000 Series I/O Family

Field Terminals

Field Wiring

Recommended Compatible

Conﬁgurable Parameters

Field Terminal

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

General Purpose

Image Description

NT-8604-FT-FU

Fused

NT-8602-FT-ST

Standard †

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing †

† Alternative fusing in the field wiring is recommended if it is

not provided in the field terminal.

Response Time

I/O response time

Field event to new data available on Railbus....33 ms (max.)

Power Supplies

Railbus (12V) current......................................................40 mA (typ.)

...........................................................................................60 mA (max.)

Bussed Field Power ...................................................115 V ac 10%

Frequency ............................................................................50 / 60 Hz

Mechanical

Module Key Code..............................................................................E1

Module width ............................................................................42 mm

Weight............................................................................................170 g

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8112_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁꢁ

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

230 V ac, isolated, sinking

. 8 discrete isolated inputs

. 230 V ac field voltage sources

. User definable input threshold

. Pulse counting option

Module Speciﬁcations

Inputs

Number of channels ...........................................................................8

OFF voltage............................................................................< 68 V ac

ON voltage ...........................................................................> 168 V ac

Wetting current .........................................1 mA (nom.) @ 230 V ac

Max. input voltage ................................................................265 V ac

Frequency ............................................................................50 / 60 Hz

NovaTech 8000 Series I/O Family

Field Terminals

Field Wiring

Recommended Compatible

Conﬁgurable Parameters

Field Terminal

Image Description

General Purpose

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

NT-8602-FT-ST

Standard †

NT-8604-FT-FU

Fused

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8610-FT-NI

Non-arcing †

NT-8611-FT-FU

Non-arcing,

fused

† External fusing of the Field Power supply is recommended

in order to protect the field wiring.

Response Time

I/O response time

Field event to new data available on Railbus....33 ms (max.)

Power Supplies

Railbus (12V) current......................................................40 mA (typ.)

...........................................................................................60 mA (max.)

Bussed Field Power .......................................................not required

Mechanical

Module Key Code..............................................................................E5

Module width ............................................................................42 mm

Weight............................................................................................170 g

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8113_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Input

230 V ac, non-isolated, module powered

. 8 discrete inputs for dry contact switches

. 230 V ac provided on input high side

. Returns commoned internally

. Pulse counting option

. 230 V ac Bussed Field Power required

Module Speciﬁcations (See also System Specification)

Inputs

Number of channels ...........................................................................8

OFF current ..........................................................................< 0.28 mA

ON current............................................................................> 0.71 mA

Wetting current .........................................1 mA (nom.) @ 230 V ac

NovaTech 8000 Series I/O Family

Field Terminals

Field Wiring

Recommended Compatible

Conﬁgurable Parameters

Field Terminal

Selectable input filter ...........................fast, slow or user defined

(User defined permits 0 to 512 ms values in 2ms steps)

Latch inputs................................................................enable /disable

Latch polarity......................................latch on high / latch on low

Pulse counting ..........................................................enable /disable

General Purpose

Image Description

NT-8604-FT-FU

Fused

NT-8602-FT-ST

Standard †

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing †

† Alternative fusing in the field wiring is recommended if it is

not provided in the field terminal.

Response Time

I/O response time

Field event to new data available on Railbus....33 ms (max.)

Power Supplies

Railbus (12V) current......................................................40 mA (typ.)

...........................................................................................60 mA (max.)

Bussed Field Power ..................................................207 to 265 V ac

Frequency ............................................................................50 / 60 Hz

Mechanical

Module Key Code..............................................................................E2

Module width ............................................................................42 mm

Weight............................................................................................170 g

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8114_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ4

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Output

2–60 V dc, non-isolated, module powered

. 8 powered outputs

. Controls solenoids and relays

. Common load supply of up to 60 V dc

. Discrete or pulsed outputs

. 1A per channel switched current

. 2–60 V dc bussed field power required

Module Speciﬁcations

Outputs

NovaTech 8000 Series I/O Family

Number of channels ...........................................................................8

Output voltage range.........................................................2–60 V dc

ON voltage drop.............................................................0.25 V (max.)

OFF leakage current ...................................................1.0 mA (max.)

Switched current per channel ††

Mechanical

Module Key Code..............................................................................B6

Module width ............................................................................42 mm

Weight............................................................................................200 g

Continuous *................................................................................1 A

For < 100 ms.................................................................................4 A

For < 20 ms...................................................................................6 A

Image Description

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

Conﬁgurable Parameters

General Purpose

NT-8604-FT-FU

Fused

NT-8602-FT-ST

Standard †

Output initialization state....................................predefined

value

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing †

Fail-safe.................................................predefined value/last value

Output .....................discrete, momentary or continuous pulse‡

Pulse width.....................................................................2 ms to 130 s

Response Time

† Alternative fusing in the field wiring is recommended if it is

not provided in the field terminal.

†† The total instantaneous switched current should not

exceed the following:

Response time

From Railbus command to output change ..........1 ms (max.)

Power Supplies

10 A for < 100 ms

Railbus (12V) current......................................................45 mA (typ.)

...........................................................................................70 mA (max.)

Bussed Field Power .........................................................2 to 60 V dc

18 A for < 20 ms

*Limited to 6 A per module

‡Consult NovaTech for availability

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8115_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ5

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Output

2–60 V dc, isolated, unpowered

. 8 fully isolated semiconductor switched outputs

. Controls solenoids and relays

. For load supplies of up to 60 V dc

. Discrete or pulsed outputs

. 1A per channel switched

Module Speciﬁcations

Outputs

Number of channels ...........................................................................8

Output voltage range.........................................................2–60 V dc

ON voltage drop.............................................................0.25 V (max.)

OFF leakage current ...................................................1.0 mA (max.)

Switched current per channel

NovaTech 8000 Series I/O Family

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

NT-8604-FT-FU

Fused

Continuous...................................................................................1 A

For < 100ms .................................................................................4 A

For < 20ms ...................................................................................6 A

Field Terminal

NT-8602-FT-ST

Standard

Image Description

General Purpose

Conﬁgurable Parameters

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing

Output initialization state...................................predefined value

Fail-safe.................................................predefined value/last value

Output .....................discrete, momentary or continuous pulse‡

Pulse width.....................................................................2 ms to 130 s

Note: External fusing to protect field wiring is recommended.

‡Consult NovaTech for availability.

Response Time

Response time

From Railbus command to output change ..........3 ms (max.)

Power Supplies

Railbus (12V) current......................................................45 mA (typ.)

...........................................................................................70 mA (max.)

Bussed Field Power .......................................................not required

Mechanical

Module Key Code..............................................................................B5

Module width ............................................................................42 mm

Weight............................................................................................200 g

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8117_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ6

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Output

20–265 V ac, non-isolated, module powered

. 8 powered outputs

. Controls solenoids and relays

. Common load supply of up to 265 V ac

. Discrete or pulsed outputs

. 1A per channel maximum

. 20–265 V ac bussed field power required

Module Speciﬁcations

Outputs

NovaTech 8000 Series I/O Family

Number of channels ...........................................................................8

Output voltage range.....................................................20–265 V ac

Frequency ............................................................................50 / 60 Hz

ON voltage drop........................................................................< 1.2 V

OFF leakage current .................................................................< 4mA

Switched current per channel ††

Mechanical

Module Key Code .............................................................................F1

Module width ............................................................................42 mm

Weight............................................................................................220 g

Image Description

Field Terminals

Continuous.................................................................................1 A*

For < 100 ms.................................................................................5 A

For < 20 ms.................................................................................20 A

Minimum load current, per channel

Field Wiring

Recommended Compatible

Field Terminal

@ 115 V ac...............................................................................11 mA

@ 230 V ac.................................................................................5 mA

General Purpose

NT-8604-FT-FU

Fused

NT-8602-FT-ST

Standard †

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing †

Conﬁgurable Parameters

Output initialization state...................................predefined value

Fail-safe.................................................predefined value/last value

Output .....................discrete, momentary or continuous pulse‡

Pulse width.....................................................................2 ms to 130 s

† Alternative fusing in the field wiring is recommended if it is

not provided in the field terminal.

Response Time

†† Stated figures are for operation with unfused field termi-

nal. When operating with 2 A fused field terminal part no.

NT-8604-FT-FU, maximum switched current is 5 A inrush for

<10 ms pulse width at 0.1% duty cycle and <108 operations

*Limited to 3 A per module.

Response time (max.) ..2 ms + 1/2 cycle of mains frequency

(From Railbus command to output change)

Power Supplies

Railbus (12V) current......................................................75 mA (typ.)

..........................................................................................125mA (max.)

Bussed Field Power (voltage)....................................20 to 265 V ac

‡Consult NovaTech for availability

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8116_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ7

Download from Www.Somanuals.com. All Manuals Search And Download.

8-channel Discrete Output

20–265 V ac, isolated, unpowered

. 8 fully isolated semiconductor switched outputs

. Controls solenoids and relays

. For load supplies of up to 250 V ac

. Discrete or pulsed outputs

. 1A per channel switched

Module Speciﬁcations

Outputs

Number of channels ...........................................................................8

Output voltage range.....................................................20–265 V ac

Frequency ............................................................................50 / 60 Hz

ON voltage drop........................................................................< 1.2 V

OFF leakage current ...............................................................< 4 mA

Switched current per channel †

NovaTech 8000 Series I/O Family

Mechanical

Module Key Code .............................................................................F4

Module width ...........................................................................42 mm

Weight............................................................................................220 g

Continuous.................................................................................1 A*

For < 100ms .................................................................................5 A

For < 20ms .................................................................................20 A

Minimum load current, per channel

Image Description

Field Terminals

Field Wiring

Recommended Compatible

Field Terminal

@ 115 V ac...............................................................................11 mA

@ 230 V ac.................................................................................5 mA

Field Terminal

NT-8602-FT-ST

Standard

General Purpose

NT-8604-FT-FU

Fused

Conﬁgurable Parameters

Class 1, Div 2

or Zone 2 hazard-

ous area

NT-8611-FT-FU

Non-arcing,

Fused

NT-8610-FT-NA

Non-arcing

Output initialization state...................................predefined value

Fail-safe.................................................predefined value/last value

Output .....................discrete, momentary or continuous pulse‡

Pulse width.....................................................................2 ms to 130 s

† Stated figures are for operation with unfused field terminal.

When operating with 2 A fused field terminal part no. NT-

8604-FT-FU, maximum switched current is 5 A inrush for <10

ms pulse width at 0.1% duty cycle and <10⁸operations.

* Limited to 3 A per module.

Response Time

Response time (max.) ..2 ms + 11⁄42 cycle of mains frequency

(From Railbus command to output change)

Power Supplies

‡Consult NovaTech for availability

Railbus (12V) current......................................................75 mA (typ.)

.........................................................................................125 mA (max.)

Bussed Field Power .......................................................not required

are properties of their respective owners. NovaTech is a registered

trademark of NovaTech, LLC. The information in this literature is

subject to change without notice and is not to be construed as a

warranty. DS_8118_0607

Contact:

NovaTech Process Solutions, LLC

11500 Cronridge Dr., Suite 110

Owings Mills, MD 21117

T: 410.753.8300

Toll Free: 800.253.3842

www.novatechweb.com

ꢁ8

Download from Www.Somanuals.com. All Manuals Search And Download.

Mustek Printer PP3000 User Manual
NETGEAR Riding Toy FSV144 User Manual
Nikon Marine Battery MB D12 User Manual
Nikon Washer Dryer Capture NX2 User Manual
Nokia Headphones HS 37W User Manual
NordicTrack Home Gym 236670 User Manual
Nortel Networks Computer Accessories 1303 User Manual
Nortel Networks IP Phone NN40050 109 User Manual
Oki Printer 2426 User Manual
Panasonic Blower BG1002 User Manual