NTNM13XKAB
INM Products
Integrated Network Management
Network Wide Backup & Restore Planning Guide
Standard Rel 1.0 July 1999
Update issue: 2
July 1999
What’s inside...
Network Wide Backup & Restore Description
Network Wide Backup & Restore Compatibilities
Network Wide Backup & Restore Engineering Considerations
Network Wide Backup & Restore Requirements
TCP/IP Network Requirements
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
Publication history
0
July 1999
Oficial release, for GA load, of Network Wide Backup & Restore Planning
Guide, Rel 1.0, update 0.2.
June 1999
May 1999
Oficial release of Network Wide Backup & Restore Planning Guide, Rel 1.0,
update 0.1.
Draft release for internal review of Network Wide Backup & Restore Planning
Guide, Rel 1.0.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
iv Publication history
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
v
Contents
0
About this document
vii
Network Wide Backup & Restore Description
1-1
Graphical User Interface (GUI) 1-2
Controller List 1-2
Controller List Filtering/Sorting 1-3
Refreshing View 1-4
User Preferences Tab 1-5
Print & Export Tab 1-6
History Tab 1-7
Recurring/Custom Storage Location 1-7
Details Window Description 1-8
Controllers Tab 1-8
Restore Tab 1-11
Restore Action 1-11
Recurring/Custom Storage Location 1-11
Stored Backup Window Description 1-11
Details Window description 1-12
Recurring Backup Tab 1-12
One Time Backup Tab 1-14
Network Wide Backup & Restore Compatibilities
2-1
GUI compatibilities 2-1
Network Wide Backup & Restore Engineering Considerations 3-1
Network Wide Backup & Restore Engineering Rules 3-1
Engineering Capacities 3-1
Disk Space Requirements 3-1
Estimated Time to Backup an OPC 3-2
Estimated Time to Backup an NP 3-2
Additional Capacities 3-2
Network Wide Backup & Restore Requirements
4-1
Hardware Requirements 4-1
Operating System Requirements 4-1
First Time Installation 4-1
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
vi Contents
TCP/IP Network Requirements
Ethernet 5-1
TCP/IP 5-2
LAN requirements 5-2
X.25 5-2
5-1
6-1
WAN requirements 5-3
Summary 5-4
List of terms
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
About this document
0
This document describes the Network Wide Backup & Restore supported by
INM. Network Wide Backup & Restore is a software application that allows
customer to manage network wide controller backups, which can be used to
aid in network restoration after catastrophic hardware failure.
This software application provides the ability to centralize and automate
backup of Network Element database and Subnetwork Controller
configuration data onto an INM server.
Audience for this document
This planning guide is for the following audience:
•
•
•
•
strategic and current planners
provisioners
transmission standards engineers
network administrators
References
This document references the following Nortel Networks technical
publications (NTP) and other documentation:
•
•
•
INM Planning Guide, PG OC 98-15
INM Installation and Administration User Guide, 450-3101-201
Network Wide Backup & Restore User Guide, 450-3101-031
Technical support and information
Nortel Networks maintains Integrated Network Management (INM) support
centers in North America and the United Kingdom (UK). Based on the
location from which your account is managed, refer to one of the following
sections.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
viii About this document
Customer accounts managed in North America
INM Customer Care provides technical support for INM customer accounts
managed in North America. The support provided consists of emergency and
regular technical support and an INM Product Services suite of additional
support services.
Use one of the following telephone numbers to reach INM Customer Care.
If you are in Canada or the US
Call toll free:
If you are not in Canada or the US
Call: 1 (country code) 613-765-7766
1-877-684-6622 (1-877-NTINMCC)
Emergency technical support
You can reach emergency technical support personnel outside of the regular
technical support hours through an automatic paging system.
Nortel Networks provides emergency technical support for INM customers
who have purchased an optional, value-added service package. The service
package provides technical support outside of regular hours for critical issues
for the period covered by the service package.
Note: Access to regular technical support for all issues defined in the
service package is also available for the period covered by the service
package.
Issues considered critical include:
•
issues that are now having an effect on, or have the potential to
immediately have an effect on, services carried by the managed nodes
•
issues causing the loss of network visibility or loss of fault management
functionality to one or more of the managed nodes
Regular technical support
Nortel Networks provides regular technical support for INM customers who
have purchased an optional, value-added service package. Call INM Customer
Care:
•
•
•
Monday to Friday
08:00 to 20:00 hrs
eastern standard time (EST) or eastern daylight time (EDT)
Use the regular technical support to report and receive help for issues covered
by the product warranty, as described in your purchase agreement with Nortel
Networks.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
About this document ix
You can be charged a standard rate for service requests that Nortel Networks
considers to be outside the scope or period covered by the product warranty.
You can purchase extended warranty coverage and additional support services.
These optional, value-added service packages are part of the INM Product
Services suite.
INM Product Services
A full suite of optional, value-added services and service packages is available
for purchase through the INM Product Services suite.
The services include:
•
•
•
•
•
•
•
•
•
extended product warranty support
advanced technical support
installation planning and support
on-site installation
technical training
software upgrades
extended HP warranty
network planning and integration consultation
Network Management System Audits and Performance Reports
Contact your Nortel Networks representative for more information about the
INM Product Services suite.
Customer accounts managed in the United Kingdom
The Nortel Networks Service Desk provides technical support for INM
customer accounts managed in the UK. You can reach the Service Desk from
Monday to Friday between 08:30 and 17:00 (UK local time) using the
following FAX or telephone numbers:
If you are in the United Kingdom
Freephone:
Telephone:
FAX:
0800 626 881
0208 361 4693
0208 945 3456
If you are not in the United Kingdom
Telephone:
FAX:
+44 208 361 4693
+44 208 945 3456
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
x About this document
EMC conformance
This product/product family complies with the provisions of
the Low Voltage Directive 73/23/EEC, and with the essential
protection requirements of the EMC Directive 89/336/EEC as
amended by 92/31/EEC, when it is properly installed and
maintained and when it is used for the purposes for which it is
intended.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1
1-1
Network Wide Backup & Restore
Description
1-
Network Wide Backup & Restore centralizes controller backup administration
and storage by allowing all backup related activities to be managed at the INM
platform.
The Network Wide Backup & Restore Release 1.0 features are listed below:
•
Administration and Maintenance of all controller backups from 1 common
graphical user interface on the INM platform.
•
A centralized disk oriented storage solution for maintaining backups that
is more reliable than remote tape archives. There is no longer a need to
travel to remote controllers to collect backup tape archives.
•
•
Ability to set the bandwidth consumption for the transfer of the remote
backup to INM on an individual controller basis (OPCs only).
7
Ability to schedule both recurring and one time backups on an individual
controller basis.
•
•
Ability to specify the storage disk used on an individual controller basis.
Ability to maintain a specified number of backups before overwriting older
backups (FIFO - First In, First Out)
•
Ability to “lock” a specified backup. If a controller’s configuration is very
stable, and a certain backup has been tested, the customer might not want
to have that backup overwritten by other scheduled backups. All other
backups for that controller would continue to run, but would not overwrite
this version. This would still allow for backups of some minor provisioning
changes which might occur.
•
Ability to support 2 levels of users: NOCADM for making schedule
changes and READ ONLY for all others. Each installation of INM Backup
& Restore can concurrently support a maximum of 1 NOCADM UI.
10
•
•
Ability to initiate a restore, which transfers archived files back to the
remote controller.
Ability to support 150 controllers from each INM Backup & Restore
installation where a controller can be an OPC, NP, or an EC1 MOA.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-2 Network Wide Backup & Restore Description
•
Ability to print summaries of controllers being managed in both a readable,
and comma separated value format.
Graphical User Interface (GUI)
The Network Wide Backup & Restore application is launched as a separate
process from the GNB’s Configuration menu.
Controller List
This window contains information that the Backup & Restore application
possesses about the controllers (refer to Figure 1-1). This controller list is used
as the source of information for many of the tabs (History, Controllers,
Restore, Recurring Backup, One Time Backup). The information that it
contains is listed in Table 1-1.
Table 1-1
Controller information
Column
Description
Name
contains the name of the particular controller
contains the IP address of the controller
IP Address
Port
contains the Port of the controller (if any)
State
contains the state of the controller with respect to Backup & Restore
indicates the type of the controller
Ctrl Type
Recurring Backup
One-Time Backup
indicates the date and time of the next recurring backup (if any)
indicates the date and time of the scheduled one-time backup (if any)
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-3
1
Figure 1-1
Controller List window
7
10
Controller List Filtering/Sorting
This feature allows users to customize the controller list according to the
options that are chosen.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-4 Network Wide Backup & Restore Description
The list is filtered by selecting the checkboxes that appear at the top of the
controller list. The default is “All”, by de-selecting all and selecting the desired
controllers, a list of controllers that fall into those contraints will be displayed.
For example, if OPC and NPC were selected, then the controller list will
display the controllers of type OPC and type NPC, complying to the
constraints. It is possible to filter the table a controller type that does not appear
as a checkbox, this is done through the “Other” checkbox and the selectable
drop down window that appears.
The list is sorted by clicking on the column heading that you wish to be sorted.
Sorting can be done in ascending or descending order. To sort in ascending
order merely click on the column heading in which you want to use as your
key, to sort in descending order click on the heading again. Sorting can be done
on any of the 7 columns found in the controller list window in the same
fashion.
Refreshing View
The view that is displayed is a static view, correct to the time that is displayed,
therefore to obtain a newer instance of the controller list and information you
must click on the “Refresh” button. This will import a new instance of the
controller list, correct to the date and time displayed on “Last Refresh” line.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-5
1
User Preferences Tab
Figure 1-2
User Preferences tab
7
Under the User Preferences tab will be the following preference setting
options:
Table 1-2
Preference setting options
Label
Input Widget values
option menu 1-5
Default
Description
Log Level:
1
Amount of detail to add to the log file.
For the Print & Export tab
Print command: text entry
widget
max 80 char NULL
Concurrent Jobs: option menu
1-5
1
Number of concurrent ftp backup
sessions possible
Email notification radio button
YES/NO
NO
Should errors be emailed to addresses
below.
10
of Errors
YES/NO
Email error
messages to:
text entry
widget
max 80 char NULL
Any errors will notify these email
addresses (comma separated).
(80 characters max)
—continued—
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-6 Network Wide Backup & Restore Description
Table 1-2 (continued)
Preference setting options
Label
Input Widget values
Default
Description
Describe
Controllers as
option menu
IP:Port,
IP:Port
IP:Port
How to describe controller in error/log
messages.
Name, Name
Managed Error
States
text entry
widget
max 80 char new
Describes States errors can be set to in
the “Manage Errors” Tab.
Print & Export Tab
Figure 1-3
Print & Export tab
Under the Print & Export Tab should be the following radio button options:
•
CSV Controller Data with Header
CSV Controller Data without Header
Readable Controller Data
•
•
•
•
INM vs. Backup & Restore OPC List
Managed Errors
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-7
1
The user would first select from the above radio buttons.
The user next would select between “Printer” and “File” radio buttons (one
must always be selected). If selecting “Printer”, the UI first defaults to the print
command defined in the Preferences tab, but it can be changed. For “File”, the
user must define an export file.
History Tab
The History Tab provides detailed information on the backups stored for a
particular controller. It also provides for administration of these backup files.
In addition, detailed information about a specific backup, such as the software
load and the scheduled backup date, is viewable. This tab contains features in
which a backup for a selected controller can be deleted, locked, or unlocked.
Figure 1-4
History tab
7
10
Recurring/Custom Storage Location
It is possible to have backups that are located somewhere other than the default
location as defined in the “Recurring Backup” tab. To facilitate this possibility,
the user of Backup & Restore will be able to specify a different location to look
for controller backups. The default of this tab is to view the backups that are
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-8 Network Wide Backup & Restore Description
located in the “Storage Location” defined in the “Recurring Backup” tab. To
choose a custom storage Location, select the Custom Storage Location radio
button and type in the directory where the backups reside. Alternatively, once
the Custom Storage Location Radio Button is selected, the Browse button can
be used to locate the repository for the backups desired. After the appropriate
location is chosen, selecting the “OK” button, the information pertaining to
these files will be filled into the tables.
Details Window Description
The Details window contains information for a particular backup. Once a
backup is selected, the Details table will indicate any related data that has been
sent by the controller at the time the backup was created.
The following data is mandatory and is passed from the controller to the
Backup & Restore application:
•
•
•
•
•
Controller Type
Controller Name, IP Address
Name of Controller Software Load
Backup Date (from controller)
Backup Date (timestamp developed by INM)
The controller can also pass other information which will be presented in this
window.
Controllers Tab
The Controllers tab enables the addition/deletion of a controller to the tool’s
list of managed controllers.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-9
1
Figure 1-5
Controllers tab
The Controller Tab screen contains crucial information pertaining to the
Controller in question, such as the IP, MOA IP, etc. Using this component of
the Backup & Restore, the controllers can be added or deleted to and from the
controllers list, respectively.
7
Table 1-3
Controller tab information
Item Description
Valid Inputs
Controller Type The controller type field enables the selection of a The valid inputs for this
controller from a list of pre-determined controllers. structure is a selection from the
drop down menu.
Name
Name is the unique identifier that will distinctly
distinguish each controller from another.
IP
The address in which the controller is occupying
within the network.
A valid IP address for the
network in question.
10
Port
If the selected controller needs a specific port in
which it can be reached, then it is entered here.
A valid port that exists on the
selected controller.
MOA IP
The IP of the MOA that is managing the connectivity The IP address of the MOA.
to the network elements.
—continued—
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-10 Network Wide Backup & Restore Description
Table 1-3 (continued)
Controller tab information
Add new
controller
This is selected if a new controller is added to the N/A
network. This disables the delete feature of Save &
Restore.
Delete selected By choosing Delete selected controller, the
N/A
controller
information of the selected controller will then
appear in the appropriate boxes.
Save
Save makes permanent all the changes that have N/A
occurred.
Delete
Delete erases the controller for the controller list
N/A
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-11
1
Restore Tab
Figure 1-6
Restore tab
7
Restore Action
After selecting a backup to restore in the “Stored Backup Window”, selecting
“Restore” will start an ftp download of the file to the controller. After the
download is initiated, it can be cancelled at any time using the “Cancel” button
located in the Controller Status Tab. The “Cancel Restore” button will only be
enabled after a restore has started. It is only possible to restore 1 controller at
a time, Once a restore has commenced, the “Restore” button for all controller
will be disabled.
Recurring/Custom Storage Location
For description, see section “Recurring/Custom Storage Location” of the
History Tab.
10
Stored Backup Window Description
For description, see section “Stored Backup Window” of the History Tab.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-12 Network Wide Backup & Restore Description
Details Window description
For description, see section “Details Window” of the History Tab.
Recurring Backup Tab
The recurring backup tab contains the information pertaining to the controller's
time and storage location of the backups. Using this tab, time and storage
location can be entered for Backup & Restore to perform a backup on a
recursive basis.
Figure 1-7
Recurring Backup tab
Setting a recurring backup time
To set up a recurring backup time for a particular controller, select the
controller and the Recurring Backup tab and by adjusting the controller's
recurring attributes. The following table lays out the field type, description,
and valid input.
Table 1-4
Setting a recurring backup time information
Field
Description
Valid Input
Start Date
YYYY
MM
Four digit calendar year.
Two digit calendar month.
XXXX where XXXX denotes an integer form of year.
XX-- where XX denotes an integer between 01 - 12
inclusive.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-13
1
Table 1-4 (continued)
Setting a recurring backup time information
DD
Two digit calendar day.
XX -- where XX denotes an integer between 01 - 31
inclusive.
Start Time
HH
Two digit representation of hour XX -- where XX denotes an integer between 00-23
on a 24 hour clock.
inclusive.
MM
SS
Two digit representation of
minutes.
XX -- where XX denotes an integer between 00 - 59
inclusive.
Two digit representation of
seconds.
XX -- where XX denotes an integer between 00 - 59
inclusive.
Backup Every Integer accompanied by the
portion of date that the integer
represents.
Integer; accompanied by Weeks, Days, or Hours
from the drop down menu.
OPC pacing
speed
Packet size of the backup.
Drop down menu.
Number to
Keep
The number of desired backups Integer; falling between 1 - 9.
kept as archived backups.
Storage
Location
The exact path to the storage
location of the backup.
Path to directory on a UNIX NFS.
Save
7
Saving the dates, time, storage location, etc. of a recurring backup for a
particular controller is done by entering the information into the appropriate
form boxes and pressing the "Save" button. If there is a type error, where the
information that is entered is not valid, a error dialog will pop up and alert you
to such. If all the information is of a logical type, then the UI will perform the
addition or modification of the recurring backup for the selected controller.
To delete a recurring backup, clear the fields using the “Clear” button and save
the information.
Clear/Set To Defaults/Save As Defaults
These three actions refer to the content that is filled in the Start date, time,
pacing speed, and storage location.
10
“Clear” clears all the information. It does not delete the information from the
scheduler.
“Set To Defaults” action button loads default information stored by the UI into
the corresponding textboxes. After the information is loaded from the data
store, it is still possible to change/alter the information in the text fields.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-14 Network Wide Backup & Restore Description
“Save as Defaults” action button saves the current information in the data fields
as the UI defaults for recurring backups. This is stored, and can be read in by
the “Set To Defaults” action button. It is important to realize that this
information should be generic enough to span the entire controller list, not just
selected controllers.
One Time Backup Tab
Figure 1-8
One Time Backup tab
The one time backup tab allows for a backup to take place on a controller
which occurs only once. A one time backup might be performed before some
upgrades, testing etc.
Setting up a One Time Backup
To set up a one time backup time for a particular controller, select the
controller and the One-Time Backup tab. Then set the required fields. The
following table lays out the field type, description, and valid input.
Table 1-5
Setting up a One Time Backup information
Field
Description
Valid Input
Start Date
YYYY
MM
Four digit calendar year. XXXX where XXXX denotes an integer form of year.
Two digit calendar month. XX-- where XX denotes an integer between 01 - 12 inclusive.
—continued—
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Description 1-15
1
Table 1-5
Setting up a One Time Backup information
DD
Two digit calendar day.
XX -- where XX denotes an integer between 01 - 31 inclusive.
Start Time
HH
Two digit representation of XX -- where XX denotes an integer between 00-23 inclusive.
hour on a 24 hour clock.
MM
SS
Two digit representation of XX -- where XX denotes an integer between 00 - 59 inclusive.
minutes.
Two digit representation of XX -- where XX denotes an integer between 00 - 59 inclusive.
seconds.
OPC pacing The packet size of the
Drop down menu.
speed
backup.
Storage
Location
The exact path to the
storage location of the
backup.
Path to directory on a UNIX NFS.
Save Action
See description in “Recurring Backup” section.
Clear/Set To Defaults/Save As Defaults
See description in “Recurring Backup” section.
7
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
1-16 Network Wide Backup & Restore Description
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
2
2-1
Network Wide Backup & Restore
Compatibilities
2-
Network Wide Backup & Restore Release 1.0 software is compatible with
INM Release 5.0 and currently supports the S/DMS TransportNode product
releases listed in Table 2-1.
GUI compatibilities
Table 2-1 lists the S/DMS TransportNode product releases required to obtain
Network Wide Backup & Restore Release 1.0 functionality.
Table 2-1
Controller release line-up
Controller
OC12
Release
Data Backed Up
Release 14.0
Release 15.0
Release 6.0
NE & OPC Databases, and misc. OPC files
NE & OPC Databases, and misc. OPC files
NE & OPC Databases, and misc. OPC files
NE & OPC Databases, and misc. OPC files
SP’s transport/provisioning data, PM Threshold Crossings
7
OC48
OC192
AccessNode
OC3 Express
Release 18.0 Planned
HX - Release 5.0
CX - Release 4.0
JAPAN - Release 5.0
TN-1P
TN-1C
TN-1X
TN-4XE
TN-64X
Release 2
NE & OPC Databases
NE & OPC Databases
NE & OPC Databases
NE & OPC Databases
NE & OPC Databases
Release 1, 2, 3
Release 7, 8
Release 1, 2, 2.02, 3
Release 2
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2 Network Wide Backup & Restore Compatibilities
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
3-1
3
Network Wide Backup & Restore
Engineering Considerations
3-
Network Wide Backup & Restore Engineering Rules
The Network Wide Backup & Restore engineering considerations for Release
1.0 are as follows:
•
•
Since Network Wide Backup & Restore application is coresident with
INM Broadband Release 5.0, the minimal bandwidth for the WAN
communication link is 56 Kbits/sec. The recommended bandwidth is
1.544 Mbits (DS1).
For an OPC connectivity to the INM and Backup & Restore workstation,
the minimal recommended bandwidth for the communication link is
56 Kbits/sec.
Engineering Capacities
Disk Space Requirements
7
The disk space required to store controller backups is dependent on the
following:
•
•
•
•
number of controllers
type of controllers
number of Network Elements which store data on the controller
number of backups maintained/controller
Following formula can be used to estimate the amount of disk space required
specifically for Network Wide Backup and Restore application.
Disk_space_1 = (# of OPCs) * (5 MByte/OPC) * (# of backups to keep)
Disk_space_2 = (# of NPs) * (1 MByte/NP) * (# of backups to keep)
Disk_space_3 = (# of EC1 MOAs) * (TBD) * (# of backups to keep)
Total_disk_space = Disk_space_1 + Disk_space_2 + Disk_space_3
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2 Network Wide Backup & Restore Engineering Considerations
Estimated Time to Backup an OPC
The estimated time for OPC backup to complete is dependent on the following:
available bandwidth
number of controllers
concurrent jobs setting under the user preferences of the GUI
•
•
•
Table 3-1
Estiimated time to backup an OPC
# of OPC
56kb/s
Conc_Job=1
56 kb/s
Conc_Job=5
1.544 mb/s (T1)
Conc_Job=1
1.544 mb/s (T1)
Conc_Job=5
1
27 minutes
27 minutes
45 minutes
165 minutes
465 minutes
17 minutes
27 minutes
115 minutes
315 minutes
17 minutes
25 minutes
65 minutes
165 minutes
10
50
150
135 minutes
615 minutes
1815 minutes
Estimated Time to Backup an NP
The estimated time for NP backup to complete is dependent on the following:
•
•
•
# of NPs on the same MOA
available bandwidth
number of NPs
Table 3-2
Estimated time to backup an NP
# of NP
1
56 kb/s
1.544 mb/s (T1)
4 minutes
7 minutes
10
70 minutes
350 minutes
1050 minutes
40 minutes
20 minutes
600 minutes
50
150
Additional Capacities
The following table shows the engineering capacities for the backup and
restore GUI usage, as well the number of simultaneous backups and restores
allowed.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
Network Wide Backup & Restore Engineering Considerations 3-3
Table 3-3
Network Wide Backup & Restore capacities
Description
INM Broadband Release 5.0
HP Workstation Model
C360
Number of instances of the Backup and Restore GUI with Admin
priviledges
1
3
Number of instances of the Backup and Restore GUI with View only
priviledges
3
Number of simultaneous backups
Number of simultaneous restores
5
1
Number of controllers that can be added in Backup and Restore’s
Controllers List
150
7
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
3-4 Network Wide Backup & Restore Engineering Considerations
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
4-1
Network Wide Backup & Restore
Requirements
4-
4
7
This section references the various requirements, both hardware and software,
necessary to support the Network Wide Backup & Restore Release 1.0
software.
Hardware Requirements
Since Network Wide Backup & Restore software has to be coresident with
INM Release 5.0, the recommneded hardware platforms of choice are
described in INM Release 5.0 Planning Guide under the section “INM Release
5.0 Requirements”.
Operating System Requirements
HP workstations must run HP-UX Release 10.20 ACE, and HP-VUE 3.0 to
support Network Wide Backup & Restore.
Again since Network Wide Backup & Restore software is coresident with INM
Release 5.0, refer to INM 5.0 Planning Guide for detailed information on
operating system requirements and HP-UX 10.20 software patches.
First Time Installation
If the workstation is purchased from Northern Telecom (Nortel), the HP-UX
operating system is installed and configured.
However, the following tasks must be performed before installing the
software:
•
•
Connect the workstation to the local area network (LAN).
Configure HP-UX 10.20 ACE according to the requirements for INM
Release 5.0 (refer to HP-UX System Administration Tasks manual for this
procedure).
10
•
Modify the HP-UX kernel parameters as required (refer to HP-UX System
Administration Tasks manual for this procedure). This procedure verifies
the setup of the HP-UX kernel parameters described in INM 5.0 Planning
Guide.
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
4-2 Network Wide Backup & Restore Requirements
•
•
Install the INM 5.0 Core software prior to the Backup & Restore software.
Refer to chapter 1, “Getting Started”, and chapter 2, “Installing the INM
software”, in INM 5.0 User Guide
Install the Network Wide Backup & Restore software. Refer to chapter 2,
“Installation of Network Wide Backup and Restore”, in Network Wide
Backup & Restore User Guide.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
5-1
TCP/IP Network Requirements
5-
This section provides a general description of ethernet networks, TCP/IP and
X.25 protocols and the requirements needed to support the operation of the
Network Wide Backup and Restore application with INM Broadband.
Ethernet
The ethernet protocol is a standard defined by the Institute of Electrical and
Electronics Engineers (IEEE) for communication networks. The IEEE
standard 802.3 defines the layer 2 functionality in the protocol stack shown
below.
5
7
Figure 5-1
OSI 7 Layer Protocol Stack
NM-00014(R5)
7
6
5
4
3
2
1
Application
Presentation
Session
Transport
Network
Data Link
Physical
The characteristics of a 10-Base-T Ethernet network are:
•
•
•
Maximum speed of 10 Mbits/sec
Maximum number of 100 Ethernet devices per network
10
Carrier Sense Multiple Access with Collision Detection (CSMA/CD)
media access control
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
5-2 TCP/IP Network Requirements
TCP/IP
The TCP/IP acronym stands for Transport Control Protocol/Internet Protocol.
These protocols are implemented in the protocol stack as shown in Figure 5-1
on page 1. This protocol is commonly used in conjunction with ethernet
networks. The TCP/IP address, also known as the IP address, is used to
uniquely identify each ethernet device on a network. This address is of the
form:
nnn.nnn.nnn.nnn
where nnn is a number from 0 to 255 (i.e., 47.246.0.71). This address is
normally assigned by the LAN administrator in order to prevent address
conflicts between ethernet devices. For more information please see Mark A.
Miller, Internetworking: A Guide to Network Communications, MT&T Books,
1991.
LAN requirements
The definition of a Local Area Network (LAN) is a network supporting
peer-to-peer communication over distances of tens of meters to several
kilometers.
The LAN requirements for the INM Broadband are:
•
•
•
•
Connectivity to the INM workstation
Ethernet connections between the INM Broadband and the X Terminals
Router or bridge access to remote OPC modules through a WAN
Ethernet connection between local OPCs and INM Broadband
Routers are usually stand-alone devices which provide the capability to
interface to many different types of networks, as well as to determine the
optimal path to the destination. Routers are commonly used to bridge remote
LANs through a WAN and can provide access to X.25, T1, frame relay, and
other types of network. The router for the INM Broadband must be capable of
supporting a minimum bandwidth of 56 Kbit/s for a setup consisting of the
INM Broadband and two X Terminals. The routers for the OPC modules must
have a minimum bandwidth of 56 Kbit/s to support 6 user sessions each. The
routers should be able to support both TCP/IP and OSI protocols for future
applications.
X.25
The X.25 protocol standard defines the interface to a Packet Data Network
(PDN), or more specifically, it defines the Data Terminal Equipment (DTE)
and Data Communications Equipment (DCE) interfaces between a
synchronous packet-mode host and a PDN. The X.25 protocol suite does not,
however, define the internal architecture of the PDN nor does it define the
PDN’s operation. An X.25 data packet network is normally used in a wide area
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP/IP Network Requirements 5-3
network for data communications to remote sites. For more information please
see Mark A. Miller, Internetworking: A Guide to Network Communications,
MT&T Books, 1991.
Figure 5-2
INM Broadband X.25 WAN Configuration
PG-0005.1
LAN router
with WAN
LAN router
with WAN
(X.25) access
(X.25) access
X.25 DCN
56 Kb/sec
56 Kb/sec
IEEE 802.3
S/DMS Network
Manager
56 Kb/sec
O
56 Kb/sec
P
C
5
7
IEEE 802.3
O
P
C
IEEE 802.3
X terminal
O
P
C
O
P
C
IEEE
802.3
X terminal
WAN requirements
The requirement for the wide area network is to provide ports to the INM
Broadband at 56 Kbit/s and to the OPC modules at 19.2 Kbit/s
The definition of a Wide Area Network (WAN) is a network that ties together
users or networks of users which are widely separated geographically.
Typically, a WAN will use public or private telecommunications facilities,
such as X.25 or T1, to provide the link between its users. If the primary
functions of the INM Broadband are surveillance and provisioning, then X.25
or sub-DS0 line rates will be sufficient for the WAN, shown in Figure 5-2 on
page 3. If the INM Broadband is to be used in a software delivery function,
then sub-rate T1 or T1 links are recommended as shown in Figure 5-3 on
page 4.
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
5-4 TCP/IP Network Requirements
Figure 5-3
INM Broadband Leased Line WAN Configuration
PG-0005.1
LAN router
with lease line
capability
56 Kb/sec or
higher
IEEE 802.3
56 Kb/sec or
higher
S/DMS Network
Manager
IEEE 802.3
O
P
C
56 Kb/sec or
higher
O
P
C
IEEE 802.3
X terminal
O
P
C
O
P
C
IEEE
802.3
X terminal
Summary
Two approaches can be used to connect the INM Broadband to the OPC
modules:
•
If the INM Broadband and the OPC modules are co-located, then a LAN
only solution may be used
•
If the INM Broadband and all the OPC modules are not co-located, then a
WAN solution must be used to supplement the LAN solution. Two
different types of WANs can be used, X.25 and Leased Line.
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
6-1
List of terms
6-
ABM
Access Bandwidth Manager
ADM
add-drop multiplexer
alarm
AN
a signal which alerts staff to an equipment fault or problem
S/DMS AccessNode
6
7
ASCII
balloon
BLSR
CCITT
American Standard Code for Information Interchange
a balloon-shaped object that appears on a node to indicate alarm counts
bidirectional line switched ring
Consultative Committee on International Telegraphy and Telephony. This
committee has been replaced by the International Telecommunications Union
(ITU)
CLFI
CMT
10
Common Language facility identifier
character-mode terminal
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
6-2 List of terms
CNet
control network
CPC
common product code
CPG
circuit pack group
CSM
centralized software management
Defense Advanced Research Projects Agency
digital data storage (tape)
DARPA
DDS
DMS
Digital Multiplex System
DMS MAP
DV45
EDA
Digital Multiplex System Maintenance Access Position
Digital Video Codec
external device access
ftp
file transfer protocol
GNB
Graphical Network Browser
Graphical Network Editor
a logical collection of network elements
GNE
group
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
List of terms 6-3
GUI
graphical user interface
highlighting
HP
the graphical application of color to a node to indicate a certain alarm severity
Hewlett-Packard
HP VUE
indicator
ISO
Hewlett-Packard Visual User Environment
an audible or visible alert to an alarm or status condition
International Organization for Standardization
ITU
International Telecommunications Union. This committee replaces the
Consultative Committee on International Telegraphy and Telephony (CCITT).
6
7
LAN
local area network
log in
log out
LTE
the action of opening a user interface element
the action of closing a user interface element
line terminating equipment
MAPCI
menu
menu bar
Maintenance and Administration Position Command Interpreter
a list of action options
10
the portion of the graphical user interface that contains the status indicator, and
the window menus
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
6-4 List of terms
MOA
managed object agent, for example, an operations controller
network element (NE)
a collection of equipment at one location that functions and is administered as
a single entity
node
NTP
graphic object representing groups or single network elements
Nortel Networks technical publication
NUM
Network Upgrade Manager, an OPC tool
operations, administration, maintenance, and provisioning
OAM&P
OC-3
an optical carrier signal in the SONET optical format which is three times the
OC-1 rate (OC-1 is an STS-1 signal translated into an optical signal)
OC-12
OC-48
OC-192
an optical carrier signal in the SONET optical format which is 12 times the
OC-1 rate (OC-1 is an STS-1 signal translated into an optical signal))
an optical carrier signal in the SONET optical format which is 48 times the
OC-1 rate (OC-1 is an STS-1 signal translated into an optical signal))
an optical carrier signal in the SONET optical format which is 192 times the
OC-1 rate (OC-1 is an STS-1 signal translated into an optical signal)
OPC
OSI
operations controller
Open Systems Interconnection
product engineering code
PEC
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
List of terms 6-5
PM
performance monitoring
SAM
System Administration Manager
Synchronous/Digital Multiplexing System
span of control
S/DMS
SOC
SONET
a standard for optical transport formulated by the Exchange Carriers Standards
Association (ESCA) for the American National Standards Institute (ANSI).
The standard defines optical carrier (OC) levels and their electrically
equivalent synchronous transport signals (STS).
span
all network elements under the control of a single operations controller (OPC)
synchronous transport signal level 1 (SONET, 51.84 Mbit/s)
6
7
STS-1
subnetwork
a graphical collection of objects organized into groups to represent the network
elements monitored by INM Broadband.
system
network elements associated with the same payload
TA-1230 ring
Bellcore standard for SONET BLSR Equipment Criteria, TA-NWT-001230
(issue 2)
TCP/IP
UDLC
UI
Transmission Control Protocol/Internet Protocol
Universal Digital Loop Carrier
user interface
10
Network Wide Backup & Restore Planning Guide
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
6-6 List of terms
USM
User Session Manager
VTBM
window
WAN
virtual tributary bandwidth management
a rectangular area of a display screen used to contain a particular application
wide area network
X.25
CCITT protocol used for wide-area packet switching. OSI Data
communication standard
Integrated Network Management
Rel 1.0 Standard July 1999
Download from Www.Somanuals.com. All Manuals Search And Download.
INM Products
Integrated Network Management
Network Wide Backup & Restore Planning Guide
Copyright 1999 Nortel Networks, All Rights Reserved.
The information contained herein is the property of Nortel Networks and
is strictly confidential. Except as expressly authorized in writing by Nortel
Networks, the holder shall keep all information contained herein
confidential, shall disclose it only to its employees with a need to know,
and shall protect it, in whole or in part, from disclosure and dissemination
to third parties with the same degree of care it uses to protect its own
confidential information, but with no less than reasonable care. Except as
expressly authorized in writing by Nortel Networks, the holder is granted
no rights to use the information contained herein.
*Nortel Networks, the Nortel Networks logo, the Globemark, How the
World Shares Ideas, Unified Networks, S/DMS TransportNode, S/DMS
AccessNode, SONET Radio 4/40, and DMS are trademarks of Nortel
Networks.
ORBIX is a trademark of IONA Technologies.
UNIX is a trademark of X/Open Company Limited.
HP and HP-UX are trademarks of Hewlett-Packard, Inc.
Standard Rel 1.0
July 1999
Printed in Canada
Download from Www.Somanuals.com. All Manuals Search And Download.
|