Nortel Networks IP Phone NN40050 107 User Manual

IP Phone 2002 User Guide  
BCM  
Business Communications Manager  
Document Status: Standard  
Document Version: 03.01  
Part Code: NN40050-107  
Date: November 2006  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Contents  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Contents  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Chapter 1  
Getting started  
The Nortel IP Phone 2002 brings voice and data to your desktop.  
Introduction  
This guide contains information about:  
telephone buttons and lights  
telephone display  
telephone setup  
how to make and answer calls  
how to use the navigation buttons  
how to program memory buttons  
how to offset the time on your telephone display  
Figure 1 shows the IP Phone 2002.  
Figure 1 IP Phone 2002  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6
Chapter 1 Getting started  
IP Phone 2002 button and light descriptions  
Figure 2 shows the IP Phone 2002 lights and buttons.  
Figure 2 IP Phone 2002 buttons  
M
L
L
J
K
I
N
H
Q
G
O
P
C
A
D
F
B
E
Table 1 shows a description of the lights and buttons.  
Table 1 IP Phone 2002 buttons and descriptions  
Hold button  
A
Places an active call on hold.  
Goodbye button  
B
C
Ends an active call.  
Handsfree button with LED  
Turns on the Handsfree mode.  
Volume control bar  
D
E
F
Adjusts the handset, Handsfree, headset, and ringer volume.  
Mute button with LED  
Turns the microphone off and on when you are on a call.  
Headset button with LED  
Turns on the headset mode.  
Mailbox in button (programmable memory button #06)  
G
Opens your CallPilot mailbox. For more information about mailbox options,  
refer to your CallPilot Quick Reference Card.  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Chapter 1 Getting started  
7
Express messaging (FEATURE 980)  
(programmable memory button #07)  
H
I
Enables you to send voice mail messages. For more information on  
voice mail messaging, refer to your CallPilot Quick Reference Card.  
Navigation cluster buttons  
Enables you to view items stored in your Call Log. For more information  
on the Call Log feature, refer to “Navigation buttons” on page 14.  
Feature  
Feature button  
J
Starts or ends a feature.  
Display buttons  
K
L
Shows feature options.  
Line and Memory buttons  
For more information on line and memory buttons, refer to “You can  
Telephone light  
M
Flashes when a call rings at the telephone.  
Lights up when Message for you appears on the display.  
Programmable memory button #05  
N
O
(Default: Blank)  
Default Services button (programmable memory button #08)  
Default access to scrollable feature display menu (FEATURE *900),  
including the hot desking feature.  
Programmable memory button #09  
Q
(Default: Blank)  
The following button is reserved for future development.  
PC Expansion button  
P
IP Phone 2002 telephone display  
There are three areas to the IP Phone 2002 telephone display:  
Button label area  
Information area  
Feature options area  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8
Chapter 1 Getting started  
Figure 3 shows an example of the display and describes each area.  
Figure 3 Display area  
Call fwd  
Page gen  
Intercom  
Button label area  
Conference  
07/24 3:12 pm  
Timer  
Information area  
Forward  
More  
DND  
Feature options area  
Button label area  
The button label area shows the label and status of the four programmable memory buttons. For  
more information about these buttons, refer to “You can program a memory button with a new  
Information area  
The Information area shows:  
the date and time when the telephone is not in use, and changes to show features and call  
information when the telephone is in use.  
Feature options area  
When a feature is activated, or when you are on an active call, the display command line shows  
you the action you must take to proceed.  
For example: Pswd. This means you must enter your mailbox password.  
The Feature options area shows the label for the FEATURE button and for the three display buttons.  
These button labels appear in capital letters directly above the Feature and display buttons, and to  
the right of the FEATURE label on the display. These button labels vary depending on the feature in  
use.  
About programmable buttons  
Your System Administrator assigns the four programmable buttons as line, intercom, or memory  
buttons. The label for each button appears on the display next to the button. For more information,  
see your System Administrator.  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 1 Getting started  
9
Telephone setup  
This section describes the IP Phone 2002 display features:  
Display contrast  
Language choice  
Ring type  
Note: For more information about the features available on your telephone and how to use them,  
refer to the Telephone Features User Guide.  
Display contrast level  
Adjust the contrast for the telephone display.  
1
2
3
Press Feature *7.  
Press DOWN and UP to view the levels.  
Press OK to select a level.  
Language choice  
Select the Primary Language for the telephone display.  
1
Press Feature *501.  
Select the Alternate Language for the telephone display.  
2
Press Feature *502.  
Select the Alternate Language 2 for the telephone display.  
3
Press Feature *503.  
Select the Alternate Language 3 for the telephone display.  
4
Press Feature *504.  
Select the Alternate Language 4 for the telephone display.  
Ring type  
Select a different ring type for your telephone.  
1
2
3
Press Feature *6.  
Press 1, 2, 3, 4, or NEXT or to hear the different ring types.  
Press OK to store the ring type.  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
10 Chapter 1 Getting started  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Chapter 2  
Features and buttons  
This chapter describes some of the IP Phone 2002 buttons and call features:  
Basic call features  
Navigation buttons  
Memory buttons  
Note: For more information about the features available on your telephone and how to use them, refer to the Telephone Features  
User Guide.  
Basic call features  
You can make external and internal calls using the following features:  
make a call  
answer a call  
hold a call  
Handsfree  
headset  
Mute  
Time Offset  
Make a call  
There are many ways to make a call depending on your telephone programming and the type of  
call.  
External calls using line buttons  
1
2
3
Lift the handset.  
Press a line button.  
Dial the external telephone number.  
External calls using intercom buttons  
1
2
Lift the handset.  
Press an intercom button, and enter a line pool access code.  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
12 Chapter 2 Features and buttons  
3
When you hear an external dial tone, dial the external telephone number.  
Note: Contact your System Administrator for a list of line pool codes. When entering a line pool  
access code on PRI lines, you do not hear dial tone.  
Internal calls using intercom buttons  
1
2
3
Lift the handset.  
Press an intercom button.  
Dial the extension number.  
Note: Contact your System Administrator for a list of extension numbers.  
Answer calls  
When your telephone rings and the light flashes, or an intercom or line button  
flashes:  
indicator  
lift the handset.  
OR  
press the line or intercom button with the flashing  
indictor before you lift the handset.  
Hold  
Calls are put on hold automatically when you switch from one line to another.  
While on a call, press . The indicator for the line on hold flashes.  
To retrieve a held call, press the line button with the flashing indicator.  
Handsfree  
Your System Administrator must program the Handsfree feature to your telephone.  
Press  
to make or answer a call.  
To switch to Handsfree when you are on a handset call, press  
the handset to switch back.  
and replace the handset. Lift  
. Press to switch  
To switch to Handsfree when you are on a headset call, press  
back.  
Headset  
You must have a headset installed on your telephone to use this feature.  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Chapter 2 Features and buttons 13  
Press  
to activate the headset mode. When the  
light is on, press a line or  
intercom button to make a call.  
To switch to your headset when you are on a handset call, press  
handset. Lift the handset to switch back.  
and replace the  
To switch to your headset when you are on a Handsfree call, press  
switch back.  
. Press  
to  
Mute  
While on a call, press  
microphone is off.  
to turn off the microphone. The  
button lights when the  
Press  
Use  
again to turn on the microphone.  
on handset, Handsfree, or headset calls.  
Time offset  
When your IP Phone 2002 is located in a different time zone from your system, the display shows  
the system time, not the local time. The Time Offset feature enables you to adjust the time that  
appears on the display.  
Before you begin, calculate the time difference, in hours, between the server time and local time.  
To change the time that appears on your telephone display to  
local time:  
1
2
3
4
Press Feature *510.  
Press CHANGE.  
Press * to switch between adding or subtracting time.  
Using the dialpad, enter the number of hours between local time and system time.  
Note: Press # to enter half hour increments.  
5
Press OK.  
Note: It may take up to one minute for the change to appear on the display.  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
14 Chapter 2 Features and buttons  
Navigation buttons  
Use the Navigation buttons to scroll through or make changes to your call log.  
1
Press Feature 812.  
Call log  
Call log displays use the following special characters:  
1
¯
(underline) identifies a new item  
identifies answered calls  
§
/
identifies long distance calls  
identifies that the information has been shortened  
To view your Call Log:  
1
Press  
Press  
Press  
Press  
Press  
to view old items.  
to view new items.  
to return to the last viewed item.  
2
3
and  
and  
to move through your items.  
to view more information on an item.  
To erase a Call Log entry:  
1
Press  
while viewing an item.  
To return a call from your Call Log:  
1
2
Display the desired number on your telephone.  
Edit the number, if required. You can add numbers for long-distance dialing or line pool  
access, or you can remove numbers using  
and  
.
3
4
Press a line button.  
Lift the handset.  
To set call log options:  
1
2
3
4
Press Feature •°›.  
Select the type of calls that will automatically be stored in your Call Log.  
Press to see the next setting.  
Press ÷ to select the displayed setting.  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Chapter 2 Features and buttons 15  
Memory buttons  
This section contains information about the IP Phone 2002 memory buttons and how to use them.  
These are buttons not assigned as line or intercom buttons. Memory buttons store internal and  
external numbers or features to give you one-touch dialing or feature activation.  
Program Memory Buttons  
You can program a memory button with a new number or feature.  
To set up external autodial:  
1
2
3
4
Press Feature *1.  
Press a memory button.  
Dial the external number.  
Press OK to store the number.  
To set up internal autodial:  
1
2
3
4
Press Feature *2.  
Press a memory button.  
Dial the extension number.  
Press OK to store the number.  
To use features:  
1
2
3
4
Press Feature *3.  
Press a memory button.  
Press Feature and enter the feature code.  
Press OK to store the feature code.  
Erasing memory buttons:  
1
2
3
Press Feature *1.  
Press a memory button.  
Press OK to erase the button.  
IP Phone 2002 User Guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
16 Chapter 2 Features and buttons  
NN40050-107  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Lawn Mower 795 792 791 790 User Manual
Multiquip Welding System GA 6RZR2 User Manual
National Instruments Network Card NI PXI 7831R User Manual
OEM Systems Speaker RB 12 User Manual
Olympus Microcassette Recorder DS 150 User Manual
Onkyo Home Theater System 29344937 User Manual
OWI Speaker LGS347 User Manual
Palsonic Flat Panel Television 6820PF User Manual
Panasonic Car Stereo System CQ R545 User Manual
Panasonic Telephone K10059 User Manual