Nortel Networks Cordless Telephone C3060 User Manual

COMPANION

C3060 Portable Telephone

User Guide

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting started

Before you use your portable for the first time, see Safety

information on page 38. You should charge its battery pack

overnight (See All about batteries and recharging

on page 32).

The parts of your

portable

Volume switch

Softkeys

Navigation keys

Mute

Directory

Line

Power On/Off

Release calls

Services

Terminate activity

Headset /data connector

Download from Www.Somanuals.com. All Manuals Search And Download.

Turn the por table on

Turn the por table off

Portable screen icons

Press and hold the k button for at least two seconds.

Press the k button for at least two seconds.

Battery strength indicators (strong to very weak)

Radio signal strength indicator (strong to very weak)

Vibrator indicator

J,I,H,G

p, Q, P

Note: The three buttons directly below your portable’s display are

called softkeys. Their labels appear on the display with an underline

above the button to which they are assigned. A softkey label is shown

like this in this user guide: REDIAL.

Setting your

You can set your portable to one of three ring options by

pressing the m button when the portable is idle. Select

one of the softkeys for FULL, CHIRP, or NONE then press the

OK softkey, or press the m button.

portable to ring

Download from Www.Somanuals.com. All Manuals Search And Download.

FULL provides a normal ring volume and cadence. CHIRP

provides one short ring at low volume. NONE provides no

audible ring.

Answering a call

Press the i button. When the portable is ringing, you

can press the m button to stop the ringing/vibration and

continue to answer the call.

Adjusting the ringing

volume

When the phone is ringing, you can adjust the ringing

volume with the volume switch. When the phone is not

ringing, use the Menu to access the volume adjustment

levels.

Adjusting the

While on a call, pressing b or B can adjust the volume in

twelve steps. The steps 0 to 8 raise the volume, with step 0

the lowest volume. The steps 9 to 11 are for noisy

environments. The display shows the volume step for two

seconds as follows:

speaker volume

• after adjusting the volume

• before making or receiving a call at volume levels 9 to 11

Download from Www.Somanuals.com. All Manuals Search And Download.

to increase volume,press here

to reduce volume,press here

Making a call

Dial the telephone number directly or:

• dial from your directory (See Using your telephone

directory on page 11)

• predial (See Customizing your portable on page 21)

• press a customized softkey (See Customizing softkeys on

page 30)

Accessing features

during a call

You can access features or Computer Telephony

Integration (CTI) applications while on a call, by three

methods:

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Press m, then select the appropriate softkey and dial the

access code digits.

2. Select an entry from your Services directory. (See Using

your services directory on page 15.)

3. Dial a feature from a programmable On-a-call softkey.

(See To assign a number to a softkey when the portable is

on a call on page 30.)

Ending a call

Press the k button.

Makingtwo callsin a

row

Press

after your first call. The portable maintains its

radio connection for another call.

Keeping your

connection

To maintain your call, stay in the radio coverage area. If you

have problems with your connection, retrace your steps. The

signal strength icon Q indicates if the signal is becoming

stronger or weaker.

Download from Www.Somanuals.com. All Manuals Search And Download.

Muting a call

To prevent your caller from hearing you, press m on the left

side of the portable. The display shows Microphone muted

and then i in j flashes. To end muting, press m again.

Redialing last

number

Your portable is set up so that you can redial the last

number you dialed by pressing

when it appears.

REDIAL

Dialing the last caller

You can view the names of the last two callers when

LAST

appears on the display. Press

and , or . to view

LAST

the names. Press > to view the number. Press

to call

DI A L

the number or

to delete the number. To add the

ERASE

name to the directory, press

SAVE

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your telephone directory

Your portable has an alphanumeric directory that allows

you to store up to 100 entries for telephone numbers.

Storing telephone

directory entries

1. Press l,

ADD

2. Enter the telephone number, then press

SAVE

3. Enter the first letter of the name by pressing the button

that has the letter you want. For example to enter A,

press 2; to enter B, press 22. Use 1 to

choose special characters such as , - ’ _ . ( )

4. Enter the rest of the letters as shown in step 3. Use >

to move the cursor forward if the next letter you want is

on the same button, or select

to insert a space.

SPACE

5. When the name is complete, press

SAVE

Hint: If you want an entry to appear at the start of your directory, make

its first character a space using > or other special characters on the

1 key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Find an entry in the

telephone directory

Once you have stored entries into the telephone directory,

you can move through them quickly by pressing the first

letter of the entry you want. For example to look for

listings under D, press l, then 3; for listings under E,

press l, then 33. If there is more than one entry

under a letter, press . to keep looking.

Note: Use 1 to choose special characters such as , - ’ _ . ( )

Editing telephone

directory entries

1. Press l, then . or , (or the first letter of the entry

you want) until you reach the entry you want to change.

Directory entries are in alphabetical order.

2. To edit the entry’s name press

3. Press

, then edit the name.

EDIT

SAVE

4. To edit the entry’s number press >, then press

EDIT

then edit the number.

5. Press , k or press l.

SAVE

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting an entry

1. Press l, then , or ..

2. Press . The display will ask Erase item?

ERASE

3. Press . The display will show Item erased. (Select

if you do not want to erase the entry.)

CANCEL

4. Press k or l.

Dialing from the

Press l, find the entry,

DI A L

telephone directory

Pause and link signal

When adding a directory item or customizing a softkey,

you may need to insert a pause or a link signal. LINK or

PAUSE appears when you are on a call to enable features

such as Transfer and Conference.

To insert a pause when you are predialing a number or

storing it in your directory, press m and select Pause. The

display shows P.

Download from Www.Somanuals.com. All Manuals Search And Download.

To insert a link signal, press m and select Link signal.

The display shows L. (See Using your C3060 Portable with

Meridian Companion or with Companion 200 or with

Norstar Companion in this guide for using this feature.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your services directory

Your portable has a services directory that allows you to

store up to 15 entries for feature codes and Computer

Telephony Integration (CTI) applications.

Note: Although the services directory can store telephone num bers,

use the services directory for feature codes and CTI applications.

If your system has a CTI server, double clicking the j

button displays a pre-programmed menu of CTI

applications.

Note: The pre-program m ed m enu of CTI applications is only available

on certain CTI system s.

Storing services

directory entries

1. Press j,

ADD

2. Enter the feature code or application code, then press

. (See Using your C3060 Portable with Meridian

SAVE

Companion or with Companion 200 or with Norstar

Companion in this guide for using this feature.) (See the

Download from Www.Somanuals.com. All Manuals Search And Download.

your system administrator for feature codes to access

CTI applications.)

3. Enter the first letter of the name by pressing the button

that has the letter you want. For example to enter A,

press 2; to enter B, press 22.

4. Enter the rest of the letters as shown in step 3. Use >

to move the cursor forward if the next letter you want is

on the same button, or select

to insert a space.

SPACE

5. When the name is complete, press

SAVE

Hint: If you want an entry to appear at the start of your directory, make

the directory entries first character a space using > or other special

characters on the 1 key.

Find an entry in the

services directory

Once you have stored entries into the services directory,

you can move through them quickly by pressing the first

letter of the entry you want. For example to look at listings

under D, press j, then 3; for listings under E, press

j, then 33. If there is more than one entry under a

letter, press . to keep looking.

Note: Use 1 to choose special characters such as , - ’ _ . ( )

Download from Www.Somanuals.com. All Manuals Search And Download.

Pause, link signal

When adding a directory item, you may need to insert a

pause, link or a feature request signal. You can use the

feature request signal to enable CTI applications.

and feature request

Pause

To insert a pause when you are predialing a number or

storing a pause in your directory, press m and select

Pause. The display shows P.

Link signal

To insert a link signal, press m and select Link signal or

press Link if it is available. The display shows L. (See

Using your C3060 Portable with Meridian Companion or

with Companion 200 or with Norstar Companion in this

guide for using this feature.)

Feature request signal

To insert a feature request signal, press m and select

Feature request or press Feat if it is available. The

display shows F. (See Using your C3060 Portable with

Meridian Companion or with Companion 200 or with

Norstar Companion in this guide for using this feature.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Editing services

directory entries

1. Press j, then find an entry. Directory entries are in

alphabetical order.

2. To edit the entry’s name press

, then edit the name.

EDIT

3. Press

SAVE

4. To edit the entry’s number press >, then press

EDIT

5. Press

, k.

SAVE

Deleting an entry

1. Press j, then find an entry.

2. Press . The display will ask Erase item?

ERASE

3. Press . The display will show Item erased. (Select

if you do not want to erase the entry.)

CANCEL

4. Press k or j.

Dialing from the

services directory

Press j, find an entry,

SELCT

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your headset

Use one of the optional headsets to free both hands for

other tasks.

Hint: Use the portable with a holster to protect the portable from falls.

A holster also allows you free movement while you are on a call.

Connecting and

disconnecting the

headset

You can disconnect the headset during a call and the call

remains on the portable.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your portable

with the headset

To answer a call, press i. To end a call, press k.

Note: If you wear a hearing aid, use the C3002 headset to prevent

unwanted tones in your hearing aid.

Note: In noisy environm ents you can use the C3002 headset to

provide better voice transm ission and reception.

Download from Www.Somanuals.com. All Manuals Search And Download.

Customizing your portable

Hint: Whenever you are searching through a list, you can press the

first letter of the feature, directory, or system entry you want. If there is

m ore than one entry under a letter, press . to keep looking.

To customize your portable, use the Menu, which contains

a number of features in alphabetical order.

Find a menu item

To search through the available options on the Menu press

m ,

Note: The portable displays options in several different ways.

Whenever the display shows a heading followed by a colon, as in

Vibrator: On, you can select the underlined softkey,

in this

OFF

case, to switch to the other option.

Whenever the display shows a heading followed by >, as in

Language>, press

to enter a m enu of options which you can

then move through by pressing , or ..

Download from Www.Somanuals.com. All Manuals Search And Download.

Key click

1. Select Key click:.

2. Choose to hear a short beep when you press a button.

Keypad light

Your portable’s keypad and display light for low-light

conditions. The keypad and display lights independent of

key pad light settings when the portable rings.

1. Select Keypad light:.

2. Choose

to light the keypad when pressing a key.

You can extend battery life by leaving the keypad light

when lighting is not required.

OFF

Key-protect

Key protect prevents accidently pressing the keys.

1. Select Key-protect:.

2. Choose

OFF

When Key-protect is turned on, press

to activate

START

softkeys or buttons on the portable.

Language

1. Select Language>.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Press

English and En français selections.

3. Press or , to select your choice.

, then

to move between the In

SELCT SÉL

Last caller

Line select

See Last caller on page 26.

To check that a number is correct before you dial, set up

your portable for predialing.

1. Choose Line selct:.

2. Select

MANUAL

3. Enter the telephone number, which may be edited using

BKSP

4. Press

to dial your call or

to store it in your

SAVE

directory.

Note: You can insert a pause or a link into a predial sequence (See

page 13).

Long tones

See Long tones on page 26.

Download from Www.Somanuals.com. All Manuals Search And Download.

Message service

Program softkeys

Ringer

See Message Service on page 27

See Program softkeys on page 30

1. Select Ringer:.

2. Press FULL for a normal ring volume and cadence.

3. Press CHIRP for one short ring at low volume.

4. Press NONE for no audible ring.

Ring types

1. Select Ring types>.

2. Press >, ^,or ^.to hear samples.

3. Press

to choose a new ring type, k.

SELCT

Ringer volume

1. Select Ringer volume>.

2. Press > , ^,or ^., to hear samples or press a number

from 1 to 5.

3. Press

to choose a new ring volume, k.

SELCT

Vibrator

Select Vibrator:. The display shows V, and the portable

vibrates briefly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Extra features

Find a menu item

To search through the available options on the Menu press

m, ^,or ^..

Note: The portable displays options in several different ways.

Whenever the display shows a heading followed by a colon, as in

Vibrator: On, you can select the underlined softkey,

in this

OFF

case, to switch to the other option.

Whenever the display shows a heading followed by >, as in

Language>, press > to enter a m enu of options which you can

then move through by pressing , or ..

If your system supports features such as Call Forward or

Call Transfer, you can customize your Services directory

to include them or you can assign them to a softkey (See

Using your services directory on page 15, Customizing

softkeys on page 30) and (See Using your C3060 Portable

with Meridian Companion or with Companion 200 or with

Norstar Companion in this guide for using this feature.)

Download from Www.Somanuals.com. All Manuals Search And Download.

You can put CTI feature codes, or system feature codes, or

telephone numbers into your Services directory.

Last caller

If your system supports calling line ID, the last caller list

shows the last two incoming calls.

1. Select Last caller:.

2. Press

to choose the last caller.

LAST

3. Press

to save the last caller in the telephone

SAVE

directory.

4. Press

to erase the last caller from the last caller

ERASE

list.

5. Press

to return to the idle display.

END

Long tones

1. Select Long tones:.

2. Choose k for long tones to respond to electronic

ON,

banking services and telephone answering machines.

This way you can send a tone that lasts until you take

your finger off the button (up to 3 seconds).

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: Not all systems support this feature. (See your system

administrator for features your system supports.)

Message waiting

Message Service

Some systems allow your portable to display Message

waiting if you have a voice mail message.

Even if your system does not support Message Waiting

indication, you can set up your portable with Message

Service to dial directly into your voice mailbox.

First, store a message service code. See To store your

message service code on page 28.

1. Press

2. Press

to access the voice mail system.

MAIL

PLAY

to listen to the message and

to move on

to the next message.

3. Press

4. Press

to listen to the previous message.

to dial the number. Press

to delete the

CALL

DEL

message.

5. Press

to exit your message service.

END

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: If you press

, and you want to use your active softkeys,

CALL

press

EXIT

Depending on your voice mail system, you may be required to

change the dial codes. Dial codes are the numbers used to access

voice mail system features. For example, the default dial code 76

deletes a message. If your voice mail system is Meridian Mail,

you do not have to change the dial codes. If you change your

message service code, you will have to change the dial codes as

required.

To store your message service code

1. Select Msg service #,

CODE

2. Enter ___________ (your voice mail service access

number) and insert one or more pauses as required (See

Pause and link signal page 13).

3. Enter __________ (your voice mailbox number and

password) and press

SAVE

Note: Your voice m ail system m ay require you to press # after you

enter your mailbox number or password.

Download from Www.Somanuals.com. All Manuals Search And Download.

4. The display shows Dialcodes?

Note: Dialcodes? is only displayed after you first store the

message service code. If you erase your m essage service code, you

will have to go through dial codes again and change as required.

Hint: For m ost Meridian Voice Mail system s, select

. For

DEFAULT

Norstar Com panion system s that support integrated voice m ail, select

. On som e Norstar Com panion system s, m essage service m ay work

differently. (See your system adm inistrator for assistance.)

5. Press

to change the default dial codes. Press

EDIT

when you do not want to change the dial codes.

when you are not using dial codes.

DEFAULT

Press

6. Go through the dial codes and change the values for

your voice mail system, if required.

Download from Www.Somanuals.com. All Manuals Search And Download.

Program softkeys

For direct, one-touch access to frequently used features or

frequently called numbers, customize your softkeys.

You can program the softkeys for use when the portable is

idle or is on a call.

Softkeys not programmed keep their default values when

the portable is idle or is on a call.

The default idle softkeys are

default on a call softkeys are

and

. The

LAST

REDIAL MAIL

and

SAVE

NEXT LINK

To assign a number to a softkey for use when the

portable is idle or on a call

1. Select Program softkeys.

2. Press the

softkey.

SELCT

3. Press the IDLE softkey to use the softkey when the

portable is idle or press the On CALL softkey to use the

softkey when the portable is on a call.

4. Press the SK - , SK - , or SK - to select a softkey.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Enter a number at prompt Enter number, and SAVE. You

can press m to access Pause, Link signal or Feature

request. (See Pause, link signal and feature request on

page 17.)

6. Enter a key label at prompt Enter key lable and SAVE.

Label your softkey with up to four characters by

pressing the button that has the letter you want. For

example to enter A, press 2; to enter B, press

22.

To return a customized softkey to the default setting

1. Select Program softkeys.

2. Press the

softkey.

SELCT

3. Press the On CALL or IDLE softkey.

4. Press the SK - , SK - , or SK - to select the softkey

you want to return to the default value.

5. Select new softkey to redefine another number and lable

to the softkey. Or select

REDIAL MAIL LAST NEXT LINK

to return the softkey to the default setting.

SAVE

Download from Www.Somanuals.com. All Manuals Search And Download.

Batteries and charging

Important battery

information

Before using your rechargeable battery pack for the first

time, it must be charged for at least 8 hours. This is

necessary to ensure full battery life.

Do not leave your portable or battery pack on a battery

charger for extended periods when the batteries are fully

charged.

Do not expose the battery packs to temperatures above

40°C/104°F for extended periods.

Your portable needs a rechargeable battery pack. Battery

level is shown by the J symbol on the top right of the

display. If the batteries are very low, the display flashes G

and you hear warning beeps. Your programming will not

be lost if you replace your batteries.

Preparing the

chargers

Connect the ac adaptor plug of the power cable to the rear

of the chargers, then attach the ac adaptor to a power

source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Group Charger

The Companion Group Charger accepts up to six battery

packs for charging. Each slot has a LED indicator.

Batteries are charged independent of position. For

example, the first battery inserted is the first battery

charged.

Installing battery packs

Insert the battery pack under the tab in the charger slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

Individual Charger

The Companion Individual Charger can charge a handset

or a spare battery pack. To charge a separate battery pack

in the desktop charger, you must place the battery pack

under the tab in the desktop charger.

You can store a spare battery pack in the rear slot of the

battery charger. The rear slot is not a charging slot.

Download from Www.Somanuals.com. All Manuals Search And Download.

Note: All Com panion battery chargers will charge all Com panion

battery packs. Except the Com panion C3050 Standard battery

charger (A0628269/NTHH06BA) which will not charge the hi-cap

(A0628217/NTHH04CA) batteries.

Hint: In high usage environments it is a good idea to have a spare

battery pack. Alternating the spare battery pack between charges will

prolong battery life.

Companion battery charger LED indications

This table applies to the group and individual battery chargers.

LED Indication

Description

Red

Fast flashing Battery defective. Replace the battery

Flashing

Battery charging

Yellow Flashing

Green Steady

Testing or preparing battery for charging

Battery fully charged

Off

None

Battery not inserted under the tab correctly

Download from Www.Somanuals.com. All Manuals Search And Download.

AAA batteries

You can also use an optional AAA battery holder with your

portable. Insert the batteries into the battery holder.

Note: The comm ercially available AAA batteries cannot be charged

in any Com panion battery charger.

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories for your portable

The following accessories work with your C3060 portable:

• C3001 Ear Bud Headset

a small and lightweight ear-bud type headset

• C3002 Over-the-head Headset

a full over-the-head band for extra stability and hold with a single

earpiece.

• C3050 Clip-on Holster

a custom-designed holster with an adjustable belt clip.

• C3060 Leather Glove

a leather glove that holds the portable with a plastic panel covering

the keypad and display.

• C3050 Rugged Protector

a rubber protective case with a built-in rigid black plastic belt clip.

The accessories listed here are available from your Nortel

Networks distributor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Safety information

Electromagnetic

energy safety

Hazardous conditions can occur while operating a portable

telephone near construction blasting caps or near

emergency service radio receivers.

Do not use this portable telephone in locations bearing

warning signs that caution against radio transmission.

Follow standard hospital acceptance procedures when

using a portable near life-support systems.

Battery safety

Do not replace batteries in a hazardous environment

(where sparks are considered dangerous, or where there are

flammable gases, flammable liquids, dust, or flammable

fumes).

Do not attempt to charge alkaline batteries.

Do not discard batteries in a fire. Batteries can explode

when subjected to extremely high temperatures.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not place the portable where the battery charging

contacts, on the bottom of the portable, will short out. For

example, placing the portable in a pocket with loose coins.

Charge the battery pack provided with the portable only in

accordance with the instructions specified in this manual.

Antenna safety

Charger safety

The C3060 portable telephone emits low levels of radio

energy. Although any risk associated with this energy is

minimal, you can further minimize your exposure by not

touching the antenna to your face while the portable

telephone is turned on.

The C3060 charger power supply is an electrical device

containing hazardous voltages. Do not open the power

supply or the charger.

Care when using

earpiece

Do not place the earpiece next to your ear if a foreign

object has become attached to the earpeice.

Note for hearing aid

users

Use of the portable telephone can produce an audible tone

within a hearing aid. The C3002 headset can be used with

hearing aids and will prevent the occurrence of the audible

tone.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical specifications for USA

Voltage

3.6 V rechargeable batteries

4.5 V (total voltage rating), three AAA alkaline batteries

Frequency band

1.920 to 1.930 GHz

Total channel

capacity

Operating

14°F to 104°F

temperature

RF output power

32 mW ERP maximum

Download from Www.Somanuals.com. All Manuals Search And Download.

Regulatory

compliance

PCI CAI: FCC Etiquette

This device complies with Part 15 of the FCC rules.

Operation is subject to the following two conditions:

1). This device may not cause harmful interference, and

2). This device must accept any interference received,

including interference that may cause undesired operation.

Any changes or modifications applied to the portable

telephone not expressly approved by Nortel could void the

user’s authority to operate the equipment.

Privacy

This portable telephone uses digital encoding to protect the

speech transmission.

Download from Www.Somanuals.com. All Manuals Search And Download.

Caring for your portable

Temperature

extremes

Avoid subjecting the portable telephone to extremes in

temperature.

Care and

Clean the portable telephone by wiping it with a damp

cloth. Do not use solvents or polishes. If your portable

telephone does not work, check all charging contacts on

the portable and the charger for dirt, grease, or other

material. If necessary, clean them with a soft dry cloth.

maintenance

If your portable drops into a liquid, let the portable dry for

two days before using.

Do not spray cleaning or disinfectant solutions on the

portable. Spray the solution on a cloth and wipe the

portable with the cloth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Do not spray

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your C3060 Portable with

Meridian Companion

This procedure describes steps to access several features of your

portable telephone. Available features vary depending on your

telephone system.

Features

Call Forward

1. Press i.

2. Enter ___________ (flexible feature code).

3. Dial the number to which you want to forward your calls.

4. Press k.

Cancel Call Forward

1. Press i.

2. Enter ____________ (flexible feature code).

3. Press k.

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Park

1. While on a call, press LINK.

2. Enter ____________ (flexible feature code).

3. Enter ____________ (the number where you want to park

the call).

4. Press k to end the current call.

Retrieve a parked call

1. Press i.

2. Enter ____________ (flexible feature code).

3. Enter the number to which the call was parked.

Conference

1. While on a call with the first party, press LINK.

2. Dial the second number.

3. When your call is answered, press LINK.

Transfer

1. While on a call, press LINK.

2. Dial the second number.

3. When the second number rings, press k.

Download from Www.Somanuals.com. All Manuals Search And Download.

Call Waiting

While you are on a call, your portable beeps to indicate you have

another call.

1. Press LINK to answer the second call.

2. Press LINK again to return to your previous call.

Ring Again

1. When you encounter a busy number, press LINK.

2. Enter ____________ (flexible feature code).

3. Press k. Your portable rings you back when a busy party

is free.

4. Press i. Your portable automatically places the call.

Cancel Ring Again

1. Press i.

2. Enter ____________ (flexible feature code).

3. Press k.

Speed Call

1. Enter ____________ (flexible feature code).

2. Enter ____________ (Speed Call code).

System Speed Call

1. Enter ____________ (flexible feature code).

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Enter ____________ (System Speed Call code).

Add a link

1. Press m, , or ..

2. Select Link signal. The portable will display an L.

Message Waiting

Your portable displays Message waiting if you have a voice

mail message. If you have already stored a message waiting

code, you can access your messages by selecting CALL. (See

page 27 for more information.)

Switch from your portable to your desk telephone

If Wireless Privacy is enabled

•

Use Call Transfer.

Use Conference.

If Wireless Privacy is disabled

Use your portable as an extension telephone.

•

Troubleshooting checklist

1. Battery charged? Properly placed?

2. Call Forward canceled?

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Still having trouble? Call your system administrator.

Other frequently used Feature Codes:

Contact for your system:

Nam e:

Tel #:

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting checklist

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your C3060 Portable with

Companion 200

This procedure describes steps to access several features of your

portable telephone. Available features vary depending on your

telephone system.

Features

Call Forward

1. Press i.

2. Enter ___________ (Call Forward code).

3. Dial the number to which you want to forward your calls.

You may need to wait for a tone.

4. Press k.

Cancel Call Forward

1. Press i.

2. Enter ___________ (Cancel Call Forward code). You may

need to wait for a tone.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. Press k.

Call Park

1. While on a call, press LINK.

2. Enter ________ (Call Park code).

3. Press k.

Retrieve a parked call

1. Press i.

2. Enter ___________ (Call Park Retrieval code).

3. Enter the number to which the call was parked.

Conference

1. While on a call with the first party,

press LINK.

2. Dial the second number.

3. When your call is answered, press LINK.

Transfer

1. While on a call, press LINK.

2. Dial the second number.

3. When your call is answered, press k.

Download from Www.Somanuals.com. All Manuals Search And Download.

Switch from your portable telephone to your desk

telephone:

Troubleshooting checklist

1. Battery charged? Properly placed?

2. Call Forward canceled?

3. Still having trouble? Call your system administrator.

Other frequently used Feature Codes:

Download from Www.Somanuals.com. All Manuals Search And Download.

Contact for your system:

Nam e:

Tel #:

Download from Www.Somanuals.com. All Manuals Search And Download.

Using your C3060 Portable with

Norstar Companion

This procedure describes steps to access several features of your

portable.

Note: Underlined text indicates a softkey to use below the display of the

C3060 portable.

Making an internal call

1. Dial the number (you may have to press i to select a

line).

Making an external call

1. Dial external access code: ________ or enter a line pool code

(provided by your installer): ________. (You may have to

press i to select a line.)

2. Dial the number.

Download from Www.Somanuals.com. All Manuals Search And Download.

Features

Transferring using a number

1. While on a call, press LINK.

2. Dial a second internal number.

3. When call is answered, press k.

Transferring using the directory

1. While on a call, press LINK.

2. Press l.

3. Use , or . or enter a letter to search through the list of

entries.

4. Press DI A L when you have made a selection.

5. When call is answered, press k.

Using Conference

1. While on a call with the first party, press LINK.

2. Dial a second internal number.

3. When it is answered, press LINK again.

Switching between two calls

While on a call you will hear a beep to indicate an incoming call (call

Download from Www.Somanuals.com. All Manuals Search And Download.

waiting tone).

1. Answer a second incoming call by pressing LINK. The first

caller is put on hold.

2. When you are ready to switch to the other caller, press

LINK.

Page

1. Press

60 or *60. The display shows

FEAT

Page choice:.

2. To page specific speakers, press SPKR.

To page telephone extensions, press SETS.

To page speakers and extensions, press BOTH.

3. The display shows

. Enter the page zone (1 to 6) on

Enter zone:

the keypad or press ALL.

Note: For systems earlier than MICS-XC 2.0, Page can only be used if an

ATA is configured.

To page telephone extensions on systems earlier than MICS-XC 2.0:

1. Press i and enter the line pool code associated with the

ATA.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Press

and enter

LINK

FEAT 71 or *71.

3. Enter the page feature code to use followed by a page zone

number (0 to 6).

Language selection

You can change the language for system messages. (See the Quick

Reference Table for features that use system messages.)

1. To select English for system messages, press

501 or *501.

FEAT

2. To select French for system messages, press

502 or *502.

FEAT

3. To select Spanish for system messages, press

503 or *503.

FEAT

To change the portable telephone language:

1. Press m and select Language>.

2. Press >, then , or . to move between the In

English and the En français selections.

3. Press

or to select your choice.

SELCT SÉL

Quick Reference Table

You may have to press i to select a line to activate some of the

following features.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enter the feature code you want to use.

Feature

Activation Code

Call Forward

4 or *4

FEAT

Cancel Call Forward

#4 or *#4

During a call press LINK +

FEAT

or *74

The portable then displays the call park loca-

tion

Call Park*

Press LINK and enter the call park location.

This is only required when you are on a call.

Call Park (retrieve)*

or *76 + exten-

FEAT 76

sion number

Call Pickup - directed†

Call Pickup - group†

System Speed Dial

75 or *75

FEAT

or *0 + two digit Speed

FEAT 0

Dial code

FEAT 800

*800

Trunk Answer from any

station

FEAT 981

*981

Voice Mail retrieval

Download from Www.Somanuals.com. All Manuals Search And Download.

Feature

Activation Code

FEAT 985

*985

Query Voice Mail DN

FEAT 980

*980

Leave VM Message

Intercept Voice Mail

FEAT 987

*987

* These features require MICS-XC 2.0 or later telephone system soft-

ware.

† These features require MICS-XC 3.0 or later telephone system soft-

ware.

The use of the

FEAT

system software.

softkey requires MICS-XC 4.1 or later telephone

Portable telephone hints

• The softkeys on your C3060 portable operate differently

than on your Norstar desk telephone. Some C3060

portable softkeys work with the local featuresdescribed

in this guide.

Download from Www.Somanuals.com. All Manuals Search And Download.

• Norstar Voice Mail operates by means of your C3060

portable’s softkeys during voice mail sessions in MICS-

XC 2.0 systems or later.

Troubleshooting checklist

• Batteries charged?

• Batteries properly placed?

• Still problems? Call your system administrator.

Contact for your system:

Nam e:

Tel #:

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting checklist

Download from Www.Somanuals.com. All Manuals Search And Download.

Printed on recycled paper

Meridian, Norstar and Com panion are tradem arks of Nortel Networks Corporation.

P0906702

Issue 1.00

Printed in Canada

For m ore inform ation, visit the Com panion hom epage at

http://www.nortel.com /com panion

Download from Www.Somanuals.com. All Manuals Search And Download.

Milan Technology Switch MIL S500 User Manual
Mountfield Lawn Mower SP536 User Manual
MTX Audio Headphones iX2 User Manual
Multiquip Cordless Saw SP706012 User Manual
Napoleon Fireplaces Indoor Fireplace BGD36NTR User Manual
Nortel Networks Cordless Telephone M3901 User Manual
Olympus Camera Lens 261011 User Manual
Panasonic Electric Shaver ES8094 User Manual
Panasonic Printer KX MB271 User Manual
Paradyne Network Card 8610 User Manual