Model No. NTBE1506.0
Serial No.
Write the serial number in the
space above for future reference.
USER’S MANUAL
Serial Number Decal (Under Seat)
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read the following important precautions
before using the dumbbell bench.
1. Read all instructions in this manual and all
warnings on the dumbbell bench before
using the dumbbell bench. Use the dumbbell
bench only as described in this manual.
11. If you feel pain or dizziness while exercising,
stop immediately and begin cooling down.
12. The decals shown below have been placed
on the dumbbell bench. If a decal is missing
or illegible, call the toll-free telephone num-
ber on the front cover of this manual and
request a free replacement decal. Apply the
decal in the location shown.
2. It is the responsibility of the owner to ensure
that all users of the dumbbell bench are ade-
quately informed of all precautions.
3. The dumbbell bench is intended for home
use only. Do not use the dumbbell bench in a
commercial, rental, or institutional setting.
4. Keep the dumbbell bench indoors, away from
moisture and dust. Place the dumbbell bench
on a level surface, with a mat beneath it to
protect the floor or carpet.
5. Make sure that there is enough clearance
around the dumbbell bench to mount, dis-
mount, and use it.
6. Inspect and properly tighten all parts regular-
ly. Replace any worn parts immediately.
7. Keep hands and feet away from moving parts.
8. Keep children under 12 and pets away from
the dumbbell bench at all times.
9. Always wear athletic shoes for foot protec-
tion while exercising.
10. The dumbbell bench is designed to support a
maximum user weight of 300 pounds and a
maximum total weight of 410 pounds. Do not
use the dumbbell bench with more than 110
pounds of weight.
WARNING:
Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for selecting the versatile NordicTrack® E
200 dumbbell bench. The dumbbell bench is designed
to help you develop the major muscles of the upper
body. Whether your goal is to tone your body, build
dramatic muscle size and strength, or improve your
cardiovascular system, the dumbbell bench will help
you to achieve the specific results you want.
after reading this manual, please see the front cover of
this manual. To help us assist you, please note the
product model number and serial number before call-
ing. The model number is NTBE1506.0. The serial
number can be found on a decal attached to the
dumbbell bench (see the front cover of this manual).
Before reading further, please review the drawing
below and familiarize yourself with the parts that are
labeled.
For your benefit, read this manual carefully before
using the dumbbell bench. If you have questions
ASSEMBLED
DIMENSIONS:
Height: 44 in. (112 cm)
Width: 25 in. (64 cm)
Depth: 48 in. (122 cm)
Backrest
Adjustable-weight Dumbbell
Selector Pin
Deck
Seat
Backrest Bracket
Backrest Knob
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART IDENTIFICATION CHART
See the drawings below to identify small parts used in assembly. The number in parentheses by each drawing is
the key number of the part, from the PART LIST on page 10. Note: Some small parts may have been pre-
assembled. If a part is not in the parts bag, check to see if it has been preassembled.
M6 x 50mm Screw (16)
M6 Washer (22)
M10 Nylon
Locknut (24)
M10 Washer (23)
M10 x 25mm Bolt (17)
M10 x 65mm Screw (20)
M10 x 15mm Screw (21)
M10 x 90mm Bolt (18)
M10 x 193mm Bolt (19)
ASSEMBLY
Before beginning assembly, carefully read the
following information and instructions:
• For help identifying small parts, use the PART
IDENTIFICATION CHART.
In addition to the included hex key and grease
packet, assembly may require the following
tools (not included):
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• one standard screwdriver
• one Phillips screwdriver
• one adjustable wrench
• one rubber mallet
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the dumbbell bench, make sure
that all parts are oriented as shown in the draw-
ings.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
1
Before beginning assembly, make sure
that you understand all the information
on page 5.
1
24
Attach the Small Stabilizer (2) to the Frame (1)
with two M10 x 90mm Bolts (18), two M10
Washers (23), and two M10 Nylon
Locknuts (24).
2
24
23
23
1
18
2. Orient the Large Stabilizer (3) so that the high
side of the mounting bracket is on the side
shown. Attach the Large Stabilizer to the Frame
(1) with two M10 x 15mm Screws (21) and two
M10 Washers (23).
2
23
21
3
High side of
mounting bracket
3. Orient the Deck (4) as shown, and press it onto
the Frame (1).
3
11
5
Next, attach the Seat Frame (5) to the Frame
(1) with two M10 x 65mm Screws (20) and two
M10 Washers (23).
4
Hand tighten the Backrest Knob (11) into the
Seat Frame (5). Next, pull the Backrest Knob
and use an adjustable wrench to fully tighten
the shaft of the Backrest Knob into the Seat
Frame. Then, release the Backrest Knob.
1
23
20
4. See the inset drawing. Locate the bracket weld-
ed to the back of the Backrest Frame (6).
4
6
Attach the Backrest Bracket (7) to the bracket
on the Backrest Frame (6) with two M10 x
25mm Bolts (17), two M10 Washers (23), and
two M10 Nylon Locknuts (24).
Bracket
6
24
23
17
7
23
6
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Attach the Backrest (9) to the Backrest Frame
(6) with four M6 x 50mm Screws (16) and four
M6 Washers (22).
5
9
22
22
16
6
22
22
16
6. Pull the Backrest Knob (11), insert the Backrest
Bracket (7) into the slot in the Seat Frame (5),
and then slowly release the Backrest Knob.
Make sure that the Backrest Knob is engaged
in one of the holes in the Backrest Bracket.
6
24
23
19
Grease
Apply a portion of the included grease to an
M10 x 193mm Bolt (19). Insert the Bolt through
the Backrest Frame (6) and the Seat Frame
(5). Then, tighten an M10 Nylon Locknut (24)
and an M10 Washer (23) onto each end of the
Bolt. Do not overtighten the Nylon Locknuts;
the Backrest Frame must pivot freely.
6
23
24
11
7
5
7. Attach the Seat (8) to the Seat Frame (5) with
two M6 x 50mm Screws (16) and two M6
Washers (22).
7
Selector Pin
Handle
8
Place the twenty weight plates from the two
Adjustable-weight Dumbbells (14) in the slots in
the rear of the Deck (4). Next, lift the selector
pins on the handles, and slide the selector pins
to the positions closest to the centers of the
handles. Then, insert the handles into the
weight plates.
14
Weight
Plates
5
4
22
8. Make sure that all parts are properly tight-
ened before you use the dumbbell bench.
Place a mat under the dumbbell bench to
protect the floor or carpet.
16
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ADJUSTMENT
This section explains how to adjust the dumbbell bench. See the accompanying exercise guide to see the correct
form for several exercises. Make sure that all parts are properly tightened each time you use the dumbbell bench.
Replace any worn parts immediately. The dumbbell bench can be cleaned with a damp cloth and a mild, non-abra-
sive detergent; do not use solvents to clean the dumbbell bench.
HOW TO ADJUST THE ANGLE OF THE
BACKREST
To adjust the angle of the backrest, pull the back-
rest knob, raise or lower the backrest, and slowly
release the backrest knob. Make sure that the
backrest knob is engaged in one of the holes in
the backrest bracket.
Backrest
Backrest Bracket
Backrest Knob
HOW TO USE THE ADJUSTABLE-WEIGHT
DUMBBELLS
Each handle can be used with two, four, six, eight,
or ten weight plates; each handle can also be used
without weight plates.
Selector
Pin
Handle
To select the desired number of weight plates, first
set a dumbbell on the deck as shown. Next, lift one
of the selector pins, slide the selector pin to one of
the adjustment holes, and then release the selector
pin. Rock the selector pin from side to side to make
sure that it is fully inserted into one of the adjust-
ment holes. Adjust the other selector pin on the
dumbbell in the same way. Always attach the
same number of weight plates to both sides of
each handle.
Weight
Plates
Deck
To use the dumbbell, lift it straight up off the deck,
making sure that the unattached weight plates
remain on the deck.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
THE FOUR BASIC TYPES OF WORKOUTS
PERSONALIZING YOUR EXERCISE PROGRAM
Muscle Building
To increase the size and strength of your muscles,
Determining the appropriate length of time for each
workout, and the numbers of repetitions or sets to
push them close to their maximum capacity. Your mus- complete, is an individual matter. It is important to
cles will adapt and grow as you progressively increase avoid overdoing it during the first few months of your
the intensity of your exercise. You can adjust the inten- exercise program. Progress at your own pace and be
sity level of an individual exercise in two ways:
• by changing the amount of weight used
sensitive to your body’s signals. If you experience pain
or dizziness at any time while exercising, stop immedi-
• by changing the numbers of repetitions and sets per- ately and begin cooling down. Find out what is wrong
formed. (A “repetition” is one complete cycle of an
exercise, such as one sit-up. A “set” is a series of
repetitions.)
before continuing. Remember that adequate rest and a
proper diet are important factors in any exercise pro-
gram.
The proper amount of weight for each exercise
depends upon the individual user. You must gauge
WARMING UP
your limits and select the amount of weight that is right Begin each workout with 5 to 10 minutes of stretching
for you. Begin with 3 sets of 8 repetitions for each
exercise that you perform. Rest for 3 minutes after
each set. When you can complete 3 sets of 12 repeti-
tions without difficulty, increase the amount of weight.
and light exercise to warm up. Warming up prepares
your body for more strenuous exercise by increasing
circulation, raising your body temperature, and deliver-
ing more oxygen to your muscles.
Toning
WORKING OUT
You can tone your muscles by pushing them to a mod-
erate percentage of their capacity. Select a moderate
amount of weight, and increase the number of repeti-
tions in each set. Complete as many sets of 15 to 20
repetitions as possible without discomfort. Rest for 1
minute after each set. Work your muscles by complet-
ing more sets rather than by using high amounts of
weight.
Each workout should include 6 to 10 different exercis-
es. Select exercises for every major muscle group,
emphasizing areas that you want to develop the most.
To give balance and variety to your workouts, vary the
exercises from workout to workout.
Schedule your workouts for the time of day when your
energy level is the highest. Each workout should be
followed by at least one day of rest. Once you find the
schedule that is right for you, stick with it.
Weight Loss
To lose weight, use a low amount of weight and
increase the number of repetitions in each set.
Exercise for 20 to 30 minutes, resting for a maximum
of 30 seconds between sets.
EXERCISE FORM
Maintaining proper form is an essential part of an
effective exercise program. This requires moving
Cross Training
Cross training is an efficient way to get a complete and through the full range of motion for each exercise, and
well-balanced fitness program. An example of a bal-
anced program follows:
• Plan strength training workouts on Monday,
Wednesday, and Friday.
• Plan 20 to 30 minutes of aerobic exercise, such as
running on a treadmill or riding on an exercise cycle
or an elliptical exerciser, on Tuesday and Thursday.
moving only the appropriate parts of the body.
Exercising in an uncontrolled manner will leave you
feeling exhausted. On the exercise guide accompany-
ing this manual you will find photographs showing the
correct form for several exercises.
The repetitions in each set should be performed
• Rest from both strength training and aerobic exercise smoothly and without pausing. The exertion stage of
for at least one full day each week to give your body
time to regenerate.
each repetition should last about half as long as the
return stage. Proper breathing is important. Exhale
during the exertion stage of each repetition and inhale
The combination of strength training and aerobic exer- during the return stroke; never hold your breath.
cise will reshape and strengthen your body and devel-
op your heart and lungs.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rest for a short period of time after each set. The
ideal resting periods follow:
• Rest for three minutes after each set for a muscle-
building workout.
Move slowly as you stretch—do not bounce. Ease
into each stretch gradually and go only as far as you
can without strain. Stretching at the end of each work-
out is an effective way to increase flexibility.
• Rest for one minute after each set for a toning work-
out.
STAYING MOTIVATED
• Rest for 30 seconds after each set for a weight loss
workout.
Plan to spend the first couple of weeks familiarizing
yourself with the equipment and learning the proper
form for each exercise.
For motivation, keep a record of each workout. List the
date, the exercises performed, the resistance used,
and the numbers of sets and repetitions completed.
Record your weight and key body measurements at
the end of every month. Remember, the key to achiev-
ing the greatest results is to make exercise a regular
and enjoyable part of your everyday life.
COOLING DOWN
Finish each workout with 5 to 10 minutes of stretch-
ing. Include stretches for both your arms and legs.
PART LIST—Model No. NTBE1506.0
R1006A
Key No. Qty.
Description
Key No. Qty.
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
1
1
1
1
1
1
1
1
4
1
1
2
2
Frame
15
16
17
18
19
20
21
22
23
24
#
6
6
2
2
1
2
2
6
10
6
Bushing
Small Stabilizer
Large Stabilizer
Deck
M6 x 50mm Screw
M10 x 25mm Bolt
M10 x 90mm Bolt
M10 x 193mm Bolt
M10 x 65mm Screw
M10 x 15mm Screw
M6 Washer
Seat Frame
Backrest Frame
Backrest Bracket
Seat
Backrest
M10 Washer
Stabilizer Cap
Backrest Knob
30mm x 60mm Inner Cap
32mm Square Inner Cap
Adjustable-weight Dumbbell
M10 Nylon Locknut
User’s Manual
Hex Key
Grease Packet
Exercise Guide
–
–
–
–
#
#
#
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover
of this manual for information about ordering replacement parts.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING—Model No. NTBE1506.0
R1006A
13
9
22
16
6
22
24
24
7
23
22
17
16
24
23
23
15
22
8
23
24
19
15
14
15
5
11
12
22
22
21
16
23
4
1
10
10
24
3
2
23
20
24
10
10
23
23
18
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information:
• the MODEL NUMBER of the product (NTBE1506.0)
• the NAME of the product (NordicTrack E 200 dumbbell bench)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING on
pages 10 and 11)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON) warrants this product to be free from defects in workmanship and mate-
rial, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This
warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for which
warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service center,
freight charges to and from the service center will be the customer’s responsibility. For in-home service, the
customer will be responsible for a minimal trip charge. This warranty does not extend to any product or dam-
age to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or
repairs not provided by an ICON authorized service center; products used for commercial or rental purposes;
or products used as store display models. No other warranty beyond that specifically set forth above is author-
ized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection
with the use or performance of the product or damages with respect to any economic loss, loss of property,
loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other consequential
damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or conse-
quential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of mer-
chantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth herein.
Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above limitation
may not apply to you.
This warranty gives you specific legal rights. You may also have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 247899 R1006A
Printed in China © 2006 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|