Model No. 831.23765.0
Serial No.
USER’S MANUAL
Write the serial number in the space
above for reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if parts are
damaged or missing, PLEASE
DO NOT CONTACT THE STORE.
For assistance, contact our
Customer Service Department.
CALL TOLL-FREE:
1-888-825-2588
Mon.–Fri. 6 a.m.–6 p.m. MST
Sat. 8 a.m.–4 p.m. MST
ON THE WEB:
CAUTION
Visit our website at
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
new products, prizes,
fitness tips, and much more!
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical exerciser before using your elliptical
exerciser. ICON assumes no responsibility for personal injury or property damage sustained by or
through the use of this product.
1. Before beginning any exercise program,
consult your physician. This is especially
important for persons over the age of 35 or
persons with pre-existing health problems.
8. Wear appropriate exercise clothes when
exercising; do not wear loose clothes that
could become caught on your elliptical exer-
ciser. Always wear athletic shoes for foot
protection.
2. It is the responsibility of the owner to ensure
that all users of the elliptical exerciser are
adequately informed of all precautions.
9. Hold the handgrip pulse sensor or the upper
body arms when mounting, dismounting, or
using your elliptical exerciser.
3. Your elliptical exerciser is intended for home
use only. Do not use your elliptical exerciser
in a commercial, rental, or institutional set-
ting.
10. Keep your back straight while using your
elliptical exerciser; do not arch your back.
11. The pulse sensor is not a medical device.
Various factors, including the user’s move-
ment, may affect the accuracy of heart rate
readings. The pulse sensor is intended only
as an exercise aid in determining heart rate
trends in general.
4. Keep your elliptical exerciser indoors, away
from moisture and dust. Place your elliptical
exerciser on a level surface, with a mat
beneath it to protect the floor or carpet.
Make sure that there is enough clearance
around your elliptical exerciser to mount,
dismount, and use it.
12. When you stop exercising, allow the pedals
to slowly come to a stop.
5. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
13. If you feel pain or dizziness while exercising,
stop immediately and cool down.
6. Keep children under age 12 and pets away
from your elliptical exerciser at all times.
14. Use your elliptical exerciser only as
described in this manual.
7. Your elliptical exerciser should not be used
by persons weighing more than 275 lbs.
(124 kg).
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for purchasing the revolutionary
tions after reading this manual, please see the front
cover of this manual. To help us assist you, note the
product model number and serial number before con-
tacting us. The model number and the location of the
serial number decal are shown on the front cover of
this manual.
®
NordicTrack ASR 630 elliptical exerciser. The ASR
630 elliptical exerciser provides a wide array of fea-
tures designed to make your workouts at home more
effective and enjoyable—and when you’re not exercis-
ing, the unique elliptical exerciser can be folded out of
the way.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
you use the elliptical exerciser. If you have ques-
Fan
Upper Body Arm
Console
Pulse Sensor
Water Bottle Holder*
Wheel
Pedal
Pedal Disc
Handle
Latch Button
*No water bottle is included
4
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the
packing materials. Do not dispose of the packing materials until assembly is completed.
Assembly requires the included hex keys and your own Phillips screwdriver
wrench , and rubber mallet
, adjustable
.
As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses
below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number follow-
ing the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassem-
bled. If a part is not in the parts bag, check to see if it has been preassembled.
Wave Washer
(80)–2
Large Wave
M8 Split
M8 Washer
(106)–2
M8 x 23mm
Thin Washer
(96)–2
M8 x 23mm
Washer (89)–2 Washer (97)–16
Washer (31)–10
M4 x 16mm
M4 x 16mm
Round Head
Screw (92)–19
M4 x 16mm
Blunt Screw
(33)–2
M10 Split
M8 Nylon
Screw (78)–4
Washer (99)–4
Locknut (94)–2
M8 x 14mm Patch
Screw (84)–6
M8 x 19mm Patch
Screw (86)–6
M8 x 23mm Shoulder
Screw (105)–2
M8 x 45mm Button
Screw (90)–6
M10 x 58mm Shoulder Bolt (104)–2
M10 x 80mm Button Screw (93)–4
1. See HOW TO FOLD AND UNFOLD THE
ELLIPTICAL EXERCISER on page 12 and
unfold the elliptical exerciser.
1
93
99
While another person lifts the front of the
Frame (1), attach the Front Stabilizer (4) to the
Frame with two M10 x 80mm Button Screws
(93) and two M10 Split Washers (99).
4
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Attach the Left and Right Frame Covers (36, 37)
around the Frame (1) with four M4 x 16mm
Round Head Screws (92).
2
36
1
92
37
92
3. With the help of another person, carefully tip
the elliptical exerciser onto its side. Attach the
Center Foot (40) to the Frame (1) with two
M4 x 16mm Blunt Screws (33). Then, return the
elliptical exerciser to the upright position.
3
1
Orient the Rear Stabilizer (3) as shown. While
another person lifts the Folding Frame (2),
attach the Rear Stabilizer to the Folding Frame
with two M10 x 80mm Button Screws (93) and
two M10 Split Washers (99).
3
40
99
33
2
99
93
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Tip: Be careful not to pinch the Wire
4
Harnesses (64, 65) during this step.
While another person holds the Upright (10)
near the Frame (1), connect the Upper Wire
Harness (65) to the Lower Wire Harness (64).
Then, insert the Upright (10) into the Frame (1).
Attach the Upright with four M8 x 19mm Patch
Screws (86) and four M8 Split Washers (97). Do
not tighten the Patch Screws yet.
Avoid pinching the
Wire Harnesses (64, 65)
during this step
10
97
65
64
97
86
97
1
86
97
5. Orient the Left and Right Upright Covers (19, 20)
as shown. Then, attach the Upright Covers
around the Upright (10) with five M4 x 16mm
Round Head Screws (92).
5
92
19
10
92
20
7
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Tip: Be careful not to damage the Upper Wire
6
Harness (65).
65
Grease
71
Apply a generous amount of the included grease
to the Upper Body Axle (71). Insert the Upper
Body Axle into the Upright (10).
86
31
10
Grease
80
Apply a small amount of grease to a Wave
Washer (80). Slide the Wave Washer onto the left
end of the Upper Body Axle (71).
24
31
86
80
Identify the Left Upper Body Leg (24), which is
marked with an “L” sticker, and orient it as
shown. Slide the Left Upper Body Leg onto the
left side of the Upper Body Axle (71).
72
Attach the Left Upper Body Leg (24) to the Upper
Body Axle (71) with an M8 x 19mm Patch Screw
(86) and an M8 x 23mm Washer (31).
Repeat this step for the Right Upper Body
Leg (72).
7. Attach the Right Upper Body Arm (23) to the
Right Upper Body Leg (72) with three M8 x
14mm Patch Screws (84) and three M8 Split
Washers (97).
7
22
Attach the Left Upper Body Arm (22) in the
same way.
23
97
84
97
24
72
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Hold the Right Rear Upper Body Cover (28) and
the Right Front Upper Body Cover (29) around
the Right Upper Body Leg (72). Attach the
Upper Body Covers with five M4 x 16mm Round
Head Screws (92).
8
Attach the Left Rear Upper Body Cover (26)
and the Left Front Upper Body Cover (27) in
the same way.
27
92
29
92
26
28
92
72
9. The Console (11) can be operated with four 1.5V
“D” batteries (not included); alkaline batteries are
recommended. IMPORTANT: If the elliptical
exerciser has been exposed to cold tempera-
tures, allow it to warm to room temperature
before inserting batteries into the Console. If
you do not do this, the console displays or
other electronic components may become
damaged. Remove the battery cover and insert
four batteries into the Console. Make sure that
the batteries are oriented as shown at the right.
Then, reattach the battery cover.
9
11
The Console (11) can also be operated with a
regulated 6-volt DC 2-amp power supply (not
included). To purchase a power supply, call
your local Sears store. To avoid damaging
the console, use only a manufacturer-sup-
plied power supply. Plug one end of the power
supply into the jack on the Console; plug the
other end into an outlet installed in accordance
with all local codes and ordinances.
Batteries
Battery
Cover
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Tip: Be careful not to pinch the wire har-
10
nesses during this step.
While another person holds the Console (11)
near the Upright (10), connect the console wire
harness to the Upper Wire Harness (65).
10
11
Attach the Console (11) to the Upright (10) with
four M4 x 16mm Screws (78).
78
78
65
Console Wire
Harness
Avoid pinching the
wire harnesses
during this step
11. Orient a Link Arm (30) as shown. Identify the
Right Pedal (35), which is marked with an “R”
sticker. Attach the Right Pedal to the Link Arm
with three M8 x 45mm Button Screws (90), three
M8 Split Washers (97), and three M8 x 23mm
Washers (31).
11
35
Repeat this step for the Left Pedal (not
30
shown) and the other Link Arm (not shown).
31
97
31
97
90
10
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Apply a generous amount of grease to the
axle on the Right Upper Body Leg (72). Then,
apply grease to a Large Wave Washer (89).
12
72
32
Slide an Upper Body Leg Spacer (9) and a
Large Wave Washer (89) onto the Right Upper
Body Leg (72). Make sure that the flat side of
the Upper Body Leg Spacer is facing out-
ward.
Grease
9
89
Grease
96
At the same time, slide the right Pedal Arm (32)
onto the Right Upper Body Leg (72) and insert
the right Link Arm (30) into the right Link Arm
Bracket (45).
106
105
32
66
Apply a small amount of grease to an M10 x
58mm Shoulder Bolt (104) and to the right Link
Arm Bracket (45). Attach the Link Arm (30) to
the Link Arm Bracket with the Shoulder Bolt, an
M8 x 23mm Washer (31) and an M8 Nylon
Locknut (94).
104
45
Grease
Then, attach the Pedal Arm (32) to the Right
Upper Body Leg (72) with an M8 x 23mm
Shoulder Screw (105), an M8 Washer (106), an
Axle Cover (66), and an M8 x 23mm Thin
Washer (96).
31
Repeat this step for the left Pedal Arm (32)
and the left Link Arm (not shown).
30
94
See step 4. Tighten the M8 x 19mm Patch
Screws (86).
13. Tighten an Adjustment Knob (52) onto an
Adjustment Pin (101).
13
Repeat this step for the other Adjustment
Knob (not shown) and the other Adjustment
Pin (not shown).
52
101
14. Make sure that all parts of the elliptical exerciser are properly tightened. Note: Some hardware may be
left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the ellip-
tical exerciser.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE ELLIPTICAL EXERCISER
HOW TO FOLD AND UNFOLD THE ELLIPTICAL
EXERCISER
HOW TO MOVE THE ELLIPTICAL EXERCISER
To move the elliptical exerciser, first fold it as
When the elliptical exerciser is not in use, the frame
can be folded out of the way. To fold the elliptical exer-
described at the left. Next, stand in front of the ellipti-
cal exerciser and place one foot against the center of
ciser, lift the handle on the rear of the elliptical exerciser the front stabilizer. Pull the transport handle backward
until the elliptical exerciser locks into the vertical posi-
tion.
until the elliptical exerciser will roll on the front wheels.
Carefully move the elliptical exerciser to the desired
position, and then lower it.
Transport
Handle
Handle
To unfold the elliptical exerciser, hold the handle, press
the latch button, and then lower the frame to the floor.
Place
your foot
here
Handle
Latch
Button
12
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO EXERCISE ON THE ELLIPTICAL
EXERCISER
HOW TO ADJUST THE STRIDE OF THE ELLIPTICAL
EXERCISER
To mount the elliptical exerciser, hold the upper body
To adjust the stride of the elliptical exerciser, first pull
arms and step onto the pedal that is in the lowest posi- one of the adjustment knobs until the adjustment
tion. Next, step onto the other pedal. Push the pedals
until they begin to move with a continuous motion.
bracket pivots freely. Pivot the adjustment bracket until
the adjustment knob is aligned with one of the three
holes in the crank arm, and gently release the knob.
Then, pivot the adjustment bracket back and forth
slightly to make sure that the adjustment pin is
engaged in one of the three holes in the crank arm.
Note: The crank arms can turn in either direction.
It is recommended that you turn the crank arms in
the direction shown by the arrow below; however,
for variety you can turn the crank arms in the
opposite direction.
Adjustment
To dismount the elliptical exerciser, wait until the ped-
als come to a complete stop. Note: The elliptical
exerciser does not have a free wheel; the pedals
will continue to move until the flywheel stops.
When the pedals are stationary, step off the higher
pedal first. Then, step off the lower pedal.
Adjustment
Pin
Bracket
Crank
Arm
Adjustment
Knob
Upper Body Arms
Holes
Adjust the other side of the elliptical exerciser in the
same way.
Pedals
Crank Arm
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
The console also features the new iFIT Interactive
Workout System. The iFIT Interactive Workout System
is compatible with iFIT Cards containing workout pro-
grams designed to help you achieve specific fitness
goals. For example, lose unwanted pounds with the 8-
week Weight Loss program. iFIT programs control the
resistance of the pedals while the voice of a personal
trainer coaches you and motivates you through your
workouts. One demo iFIT Card is included. Additional
iFIT Cards are available separately. To purchase iFIT
Cards, go to www.iFIT.com or call the telephone
number on the front cover of this manual. iFIT
Cards are also available at select stores.
The advanced console offers an array of features
designed to make your workouts more effective and
enjoyable. When you select the manual mode of the
console, you can change the resistance of the pedals
with the touch of a button. As you exercise, the con-
sole will provide continuous exercise feedback. You
can even measure your heart rate using the handgrip
pulse sensor.
The console also offers four preset programs. Each
program automatically changes the resistance of the
pedals and prompts you to increase or decrease your
pedaling pace as it guides you through an effective
workout.
You can even connect your MP3 player or CD player
to the console’s stereo sound system and listen to
your favorite music or audio books while you exercise.
In addition, the console features two heart rate pro-
grams that change the resistance of the pedals to
keep your heart rate near target heart rate settings
while you exercise.
To use the manual mode of the console, follow the
steps beginning on page 15. To use a preset
program, see page 17. To use a heart rate program,
see page 18. To use an iFIT program, see page 19.
To use the stereo sound system, see page 19.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE THE MANUAL MODE
4. Follow your progress with the displays.
Note: If there is a sheet of clear plastic on the face of
the console, remove the plastic.
The upper right
display can show the
elapsed time, the dis-
1. Press any button on the console or begin
pedaling to turn on the console.
tance (total revolu-
tions) you have ped-
aled, the approximate
When you turn on the console, the display and
the program target pacer will light. A tone will
then sound and the console will be ready for use.
number of calories you have burned, and the
approximate number of grams of carbs you have
burned. The display will change modes every few
seconds.
2. Select the manual mode.
The lower right
When you turn on the console, the manual mode
will be selected. If you have selected a program,
reselect the manual mode by pressing any of the
Programs buttons repeatedly until a track appears
in the left display.
display can show your
pedaling pace (in rev-
olutions per minute)
and the resistance
level of the pedals.
The display will change modes every few sec-
onds. The display will also show your heart rate
when you use the handgrip pulse sensor (see
step 5 on page 16).
The left display will
show a track repre-
senting 1/4 mile. As
you exercise, indica-
tors will appear in
succession around
3. Begin pedaling and change the resistance of
the pedals as desired.
the track until the
entire track appears.
The track will then disappear and the indicators
will again begin to appear in succession
As you pedal,
change the resis-
tance of the pedals
To change the display mode, press the Display
button repeatedly until the desired exercise infor-
mation appears in the upper or lower right display.
After several seconds, the display will change
modes automatically as before.
by pressing the
OneTouch Resis-
tance buttons. There
are ten resistance levels. Note: After you press
the buttons, it will take a moment for the pedals
to reach the selected resistance level.
To view the total distance pedaled since the ellipti-
cal exerciser was purchased, press the Odometer
button. The information will appear in the display
for a few seconds. To view the trip distance, press
the Odometer button a second time. To reset the
trip distance, hold down the Odometer button for a
few seconds. Note: The number on the right side
of the display multiplied by the number on the left
side equals the total distance or the trip distance.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Measure your heart rate if desired.
If there are
6. Turn on the fan if desired.
To turn on the fan at high speed, press the Fan
button. To turn on the fan at low speed, press the
Fan button a second time. To select the auto
mode, press the Fan button a third time; while the
auto mode is selected, the speed of the fan will
automatically increase or decrease as you
increase or decrease your pedaling speed.
sheets of clear
plastic on the
metal contacts
on the handgrip
pulse sensor,
Contacts
remove the plas-
tic. In addition,
make sure that
your hands are
clean. To mea-
Pivot the thumb
tab on the right
side of the fan to
adjust the fan
sure your heart rate, hold the handgrip pulse sen-
sor with your palms resting against the metal con-
tacts. Avoid moving your hands or gripping the
contacts tightly.
Thumb
angle.
Tab
To turn off the fan, press the Fan button again.
Note: If the pedals do not move for about thirty
seconds, the fan will automatically turn off to con-
serve the batteries.
When your pulse is detected, a heart-shaped
symbol will flash in the display each time your
heart beats and then your heart rate will be
shown. For the most accurate heart rate reading,
hold the contacts for at least 15 seconds.
7. When you are finished exercising, the console
will turn off automatically.
If your heart rate is not shown, make sure that
your hands are positioned as described. Be care-
ful not to move your hands excessively or to
squeeze the metal contacts tightly. For optimal
performance, clean the metal contacts using a
soft cloth; never use alcohol, abrasives, or
chemicals to clean the contacts.
If the pedals do not move for several seconds, a
series of tones will sound and the console will
pause.
If the pedals do not move for about five minutes,
the console will turn off and the displays will be
reset.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
HOW TO USE A PRESET PROGRAM
During the program, the program target pacer will
prompt you to keep your pedaling pace near the
target pace setting for the current segment. When
a left indicator lights, increase your pace; when a
right indicator lights, decrease your pace. When
the center indicator lights, maintain your current
pace. Important: The program target pacer is
intended only to provide a goal. Make sure to
pedal at a pace that is comfortable for you.
1. Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 15.
2. Select a preset program.
To select one of the four preset programs, press
the Weight Loss, the Aerobic 1, the Aerobic 2, or
the Performance button on the left side of the
console.
When you select a preset program, the name of
the program and the maximum resistance level
will appear in the display for a few seconds. A
profile of the resistance levels of the program will
also scroll across the left side of the display.
If the resistance level for the current segment is
too high or too low, you can manually override
the resistance level by pressing the OneTouch
Resistance buttons. However, when the current
segment ends, the resistance of the pedals will
automatically adjust to the resistance level for the
next segment.
3. Begin pedaling to start the program.
Each program is divided into 30 one-minute seg-
ments. One resistance level and one target pace
setting is programmed for each segment. Note:
The same resistance level and/or target pace set-
ting may be programmed for consecutive seg-
ments.
If you stop pedaling for several seconds, a series
of tones will sound and the program will pause. To
restart the program, simply resume pedaling. The
program will continue until the last segment of the
program ends.
4.
5.
Follow your progress with the displays.
See step 4 on page 15.
Measure your heart rate if desired.
See step 5 on page 16.
6. Turn on the fan if desired.
During the program, the program profile will show
your progress (see the drawing above). The
flashing segment of the profile represents the cur-
rent segment of the program. The height of the
flashing segment indicates the resistance level
for the current segment. At the end of each seg-
ment of the program, a series of tones will sound
and the next segment of the profile will begin to
flash. If a different resistance level is pro-
grammed for the next segment, the resistance
level will appear in the display for a few seconds
to alert you. The resistance of the pedals will then
change.
See step 6 on page 16.
7.
When you are finished exercising, the console
will turn off automatically.
See step 7 on page 16.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5.
HOW TO USE A HEART RATE PROGRAM
Begin pedaling to start the program.
1. Press any button on the console or begin
pedaling to turn on the console.
Heart rate program 1 is divided into 40 one-
minute segments. Note: For a shorter workout,
stop exercising or select a different program
before the program ends.
See step 1 on page 15.
2. Select a heart rate program.
Heart rate program 2 is divided into 30 one-
minute segments. One target heart rate setting is
programmed for each segment. Note: The same
target heart rate setting may be programmed for
consecutive segments.
To select one of the heart rate programs, press
the Heart Rate 1 or the Heart Rate 2 button on
the left side of the console.
3.
Enter a target heart rate setting.
During the program, the program profile in the
display will show your progress. The flashing seg-
ment of the profile represents the current seg-
ment of the program. The height of the flashing
segment indicates the target heart rate setting for
the current segment. At the end of each segment
of the program, a series of tones will sound and
the next segment of the profile will begin to flash.
A few seconds after
you select a heart
rate program, the tar-
get heart rate setting
for the program will
flash in the lower right
display.
During heart rate program 1, the same target
heart rate setting will be programmed for all seg-
ments of the program. If you have selected heart
rate program 1, press the increase and decrease
buttons above the Heart Rate Program buttons to
enter the desired target heart rate setting (see
EXERCISE INTENSITY on page 21).
During heart rate program 2, different target
heart rate settings will be programmed for differ-
ent segments of the program. If you have select-
ed heart rate program 2, press the increase and
decrease buttons above the Heart Rate Program
buttons to enter the desired maximum target
heart rate setting for the program (see EXER-
CISE INTENSITY on page 21).
During both programs, the console will regularly
compare your heart rate to the target heart rate
setting for the current segment of the program. If
your heart rate is too far below or above the tar-
get heart rate setting, the resistance of the pedals
will automatically increase or decrease to bring
your heart rate closer to the target heart rate set-
ting. Each time the resistance changes, the resis-
tance level will appear in the display for a few
seconds to alert you.
4. Hold the handgrip pulse sensor.
It is not necessary to hold the handgrip pulse
sensor continuously during heart rate programs;
however, you should hold the handgrip pulse sen-
sor frequently for the programs to operate proper-
ly. Each time you hold the handgrip pulse sen-
sor, keep your hands on the metal contacts
for at least 30 seconds.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
While you exercise, the program target pacer will
prompt you to maintain a constant pedaling
speed. When a left indicator lights, increase your
pace; when a right indicator lights, decrease your
pace. When the center indicator lights, maintain
your current pace. Important: The program tar-
get pacer is intended only to provide a goal.
Make sure to pedal at a pace that is comfort-
able for you.
HOW TO USE AN IFIT PROGRAM
1. Press any button on the console or begin
pedaling to turn on the console.
See step 1 on page 15.
2.
Insert an iFIT Card and select a program.
To use an iFIT program, insert an iFIT Card into
the iFIT slot; make sure that the iFIT Card is ori-
ented so the metal contacts are face down and
are facing the slot. When the iFIT Card is proper-
ly inserted, the indicator next to the slot will light
and the name of the iFit program will appear in
the display.
If the resistance level for the current segment is
too high or too low, you can manually override
the resistance level by pressing the OneTouch
Resistance buttons. However, when the console
compares your heart rate to the target heart rate
setting, the resistance of the pedals may auto-
matically increase or decrease to bring your heart
rate closer to the target heart rate setting.
iFIT Slot
iFIT Card
If you stop pedaling for several seconds, a series
of tones will sound and the program will pause. To
restart the program, simply resume pedaling. The
program will continue until the last segment of the
program ends.
Next, select the desired program on the iFIT Card
by pressing the increase and decrease buttons
next to the iFIT slot.
6.
Follow your progress with the displays.
A moment after you select a program, the voice
of a personal trainer will begin guiding you
through your workout. iFIT programs work in the
same way as preset programs. To use the pro-
gram, see steps 3 to 7 on page 17.
See step 4 on page 15.
7. Turn on the fan if desired.
3.
See step 6 on page 16.
When you are finished exercising, remove the
iFIT Card.
8.
When you are finished exercising, the console
will turn off automatically.
Remove the iFIT Card when you are finished
exercising. Store the iFIT Card in a secure place.
See step 7 on page 16.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s
stereo sound system while you exercise, plug the
included audio cable into the jack on the console and
into a jack on your MP3 player or CD player; make
sure that the audio cable is fully plugged in.
Next, press the play button on your MP3 player or CD
player. Adjust the volume of the speakers using the
volume control on your MP3 player or CD player.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
EXERCISE GUIDELINES
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
WARNING:
Before beginning
this or any exercise program, consult your
physician. This is especially important for
persons over the age of 35 or persons with
pre-existing health problems.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic
exercise, which is activity that requires large amounts
of oxygen for prolonged periods of time. For aerobic
exercise, adjust the intensity of your exercise until
your heart rate is near the highest number in your
training zone.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is
intended only as an exercise aid in determin-
ing heart rate trends in general.
HOW TO MEASURE YOUR HEART RATE
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
To measure your heart
rate, exercise for at
least four minutes.
Then, stop exercising
and place two fingers on
your wrist as shown.
EXERCISE INTENSITY
Take a six-second
heartbeat count, and
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning, maximum fat burning, and aerobic exer-
cise.
multiply the result by 10 to find your heart rate. For
example, if your six-second heartbeat count is 14,
your heart rate is 140 beats per minute. Note: If your
exercise equipment includes a pulse sensor, you can
use the pulse sensor to measure your heart rate.
WORKOUT GUIDELINES
Warm-up—Start with 5 to 10 minutes of stretching and
light exercise. A warm-up increases your body tem-
perature, heart rate, and circulation in preparation for
exercise.
Training Zone Exercise—Exercise for 20 to 30 min-
utes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as
you exercise–never hold your breath.
To find the proper intensity level, first find your age at
the bottom of the chart (ages are rounded off to the
nearest ten years). The three numbers listed above
your age define your “training zone.” The lowest num-
ber is the heart rate for fat burning, the middle num-
ber is the heart rate for maximum fat burning, and the
highest number is the heart rate for aerobic exercise.
Cool-down—Finish with 5 to 10 minutes of stretching.
Stretching increases the flexibility of your muscles and
will help to prevent post-exercise problems.
EXERCISE FREQUENCY
Burning Fat—To burn fat effectively, you must exer-
cise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest
between workouts. After a few months of regular exer-
cise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE AND TROUBLESHOOTING
Inspect and tighten all parts of the elliptical exerciser
regularly. Replace any worn parts immediately.
HOW TO ADJUST THE BELT
If the pedals slip while you are pedaling, even while
the resistance is adjusted to the highest setting, the
belt may need to be adjusted. To adjust the belt, first
see assembly step 12 on page 11 and remove the left
pedal arm and the left link arm.
To clean the elliptical exerciser, use a damp cloth and
a small amount of mild soap. Important: To avoid
damage to the console, keep liquids away from
the console and keep the console out of direct
sunlight.
Then, carefully
pry off the left
Disc Cover (13)
using a flat
BATTERY REPLACEMENT
If the console displays become dim, the batteries
should be replaced; most console problems are the
result of low batteries. See assembly step 9 on page
9 for replacement instructions.
screwdriver. Next,
remove the four
screws (not
shown) from the
HANDGRIP PULSE SENSOR TROUBLESHOOTING
center of the left
Disc (12). Gently
rotate the Disc
Cover and the
13
12
If the handgrip pulse sensor does not function proper-
ly, see step 5 on page 16.
Disc away from the elliptical exerciser.
HOW TO ELIMINATE RUBBING OF THE DISCS
Loosen, but do
not remove, the
three indicated
screws (A). Insert
If the Discs (12) rub against the Side Shields (14, 15)
during use, make sure that the Center Foot (40) is
installed in the Frame (1). If the Center Foot is
installed, loosen the two indicated Bolt Sets (88) and
the two M4 x 19mm Screws (81) in each side of the
elliptical exerciser.
74
47
the shaft of a
screwdriver
downward
48
between the
A
Idler (47) and the
Idler Pulley (48).
Pull the top of the
screwdriver
88
toward the front
of the elliptical exerciser until the Belt (74) is tight.
Then, tighten the three screws.
14, 15
1
12
Reattach the left disc with the four screws and then
reattach the left disc cover. Next, see assembly step
12 on page 11 and reattach the left pedal arm and the
left link arm.
40
81
Adjust the position of the Side Shields (14, 15) until
the Discs (12) no longer rub against them, and then
tighten the Bolt Sets (88) and the M4 x 19mm Screws
(81).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
SUGGESTED STRETCHES
The correct form for several basic stretches is shown at the right.
Move slowly as you stretch—never bounce.
1
1. Toe Touch Stretch
Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.
2
2. Hamstring Stretch
Sit with one leg extended. Bring the sole of the opposite foot
toward you and rest it against the inner thigh of your extended
leg. Reach toward your toes as far as possible. Hold for 15
counts, then relax. Repeat 3 times for each leg. Stretches:
Hamstrings, lower back and groin.
3. Calf/Achilles Stretch
3
With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for each leg. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.
4
4. Quadriceps Stretch
With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for each leg. Stretches: Quadriceps and hip muscles.
5. Inner Thigh Stretch
5
Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and
hip muscles.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PART LIST—Model No. 831.23765.0
R0807A
Key No. Qty.
Description
Key No. Qty.
Description
1
1
1
1
1
1
1
4
2
2
1
1
2
2
1
1
4
2
2
1
1
2
1
1
1
1
1
1
1
1
2
10
2
2
1
1
1
1
1
2
1
1
4
2
1
2
2
1
1
1
1
Frame
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
1
2
Clamp
2
Folding Frame
Adjustment Knob
Pivot Arm Bushing
Link Snap Ring
Left Crank Arm
Crank Arm Spacer
Large Pulley
3
Rear Stabilizer
4
4
Front Stabilizer
Right Pedal Bracket
Left Pedal Bracket
Upper Bushing Assembly
Upper Body Arm Endcap
Upper Body Leg Spacer
Upright
4
5
1
6
1
7
1
8
2
Crank Flange
9
2
Crank Bearing Assembly
Crank Spacer
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
1
Console
1
Crank
Disc
2
Crank Snap Ring
Flange Screw
Disc Cover
2
Left Side Shield
Right Side Shield
Stabilizer Endcap
Wheel
1
Lower Wire Harness
Upper Wire Harness
Axle Cover
1
2
4
Bushing Assembly
Brass Bushing
Latch Bracket
Link Axle
2
Left Upright Cover
Right Upright Cover
Pivot Bushing
1
1
Pivot Axle
1
Upper Body Axle
Right Upper Body Leg
Upper Body Leg Endcap
Belt
Left Upper Body Arm
Right Upper Body Arm
Left Upper Body Leg
Latch Axle
1
2
1
2
Foam
Left Rear Upper Body Cover
Left Front Upper Body Cover
Right Rear Upper Body Cover
Right Front Upper Body Cover
Link Arm
1
Frame Cap
2
Transfer Handle Endcap
M4 x 16mm Screw
4
4
M4 x16mm Flat Head Screw
Wave Washer
2
M8 x 23mm Washer
Pedal Arm
4
M4 x 19mm Screw
2
M10 Nylon Locknut
M4 x 16mm Blunt Screw
Left Pedal
8
M6 x 10mm Button Screw
M8 x 14mm Patch Screw
M10 x 25mm Button Screw
M8 x 19mm Patch Screw
M8 x 28mm Button Screw
M8 x 25mm Bolt Set
Large Wave Washer
M8 x 45mm Button Screw
M10 x 60mm Button Bolt
M4 x 16mm Round Head Screw
M10 x 80mm Button Screw
M8 Nylon Locknut
6
Right Pedal
2
Left Frame Cover
Right Frame Cover
Latch Spring
10
12
5
31mm x 23mm Wave Washer
Center Foot
2
6
Latch Button
2
Link Bearing
19
4
Link Arm Pad
Eddy Mechanism
Link Arm Bracket
Adjustment Arm
Idler
10
2
M10 Washer
4
M8 x 23mm Thin Washer
M8 Split Washer
16
1
Idler Pulley
Right Crank Arm
Resistance Motor
Reed Switch/Wire
4
M10 Split Washer
1
Side Shield Fastener
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Key No. Qty.
Description
Key No. Qty.
Description
101
102
103
104
105
106
2
2
4
2
2
2
Adjustment Pin
107
2
–
–
–
–
M8 x 32mm Washer
Audio Wire
Adjustment Spacer
Large Snap Ring
*
*
*
*
User’s Manual
Hex Key
M10 x 58mm Shoulder Bolt
M8 x 23mm Shoulder Screw
M8 Washer
Grease Packet
Note: Specifications are subject to change without notice. See the back cover of this manual for information
about ordering replacement parts. *These parts are not illustrated.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING A—Model No. 831.23765.0
R0807A
26
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLODED DRAWING B—Model No. 831.23765.0
R0807A
27
Download from Www.Somanuals.com. All Manuals Search And Download.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to
provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED DRAWING
near the end of this manual)
LIMITED WARRANTY
WHAT IS COVERED—The entire NordicTrack elliptical exerciser (“Product”) is warranted to be free of all defects in material and
workmanship.
WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original purchaser.
HOW LONG IT IS COVERED—ICON Health & Fitness, Inc. (“ICON”) warrants the product for one year after the date of purchase.
Labor is covered for one year. There is a lifetime warranty on the frame.
WHAT WE DO TO CORRECT COVERED DEFECTS—We will ship to you, without charge, any replacement part or component, pro-
viding the repairs are authorized by ICON first and are performed by an ICON trained and authorized service provider, or, at our
option, we will replace the Product.
WHAT IS NOT COVERED—Any failures or damage caused by unauthorized service, misuse, accident, negligence, improper assem-
bly or installation, alterations, modifications without our written authorization or by failure on your part to use, operate, and maintain
as set out in your User’s Manual (“Manual”).
WHAT YOU MUST DO—Always retain proof of purchase, such as your bill of sale; store, operate, and maintain the Product as spec-
ified in the Manual; notify our Customer Service Department of any defect within 10 days after discovery of the defect; as instruct-
ed, return any defected part for replacement or, if necessary, the entire product, for repair.
USER’S MANUAL—It is VERY IMPORTANT THAT YOU READ THE MANUAL before operating the Product. Remember to do the
periodic maintenance requirements specified in the Manual to assure proper operation and your continued satisfaction.
HOW TO GET PARTS AND SERVICE—Simply call our Customer Service Department at 1-888-825-2588 and tell them your name
and address and the serial number of your Product. They will tell you how to get a part replaced, or if necessary, arrange for service
where your Product is located or advise you how to ship the Product for service. Before shipping, always obtain a Return
Authorization Number (RA No.) from our Customer Service Department; securely pack your Product (save the original shipping car-
ton if possible); put the RA No. on the outside of the carton and insure the product. Include a letter explaining the product or prob-
lem and a copy of your proof of purchase if you believe the service is covered by warranty.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or per-
formance of the product or damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoy-
ment or use, costs of removal, installation or other consequential damages of whatsoever nature. Some states do not allow the exclu-
sion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of merchantability or fitness
for a particular purpose is limited in its scope and duration to the terms set forth herein. Some states do not allow limitations on how
long an implied warranty lasts. Accordingly, the above limitation may not apply to you.
No one is authorized to change, modify or extend the terms of this limited warranty. This warranty gives you specific legal rights and
you may have other rights which vary from state to state.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813
Part No. 253072 R0807A
Printed in China © 2007 ICON IP, Inc.
Download from Www.Somanuals.com. All Manuals Search And Download.
|