Nokia Bluetooth Stereo Headset
BH-214
1 2 3
4
5
9
10
6
7
8
13
11
12
15
14
9214016/1
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
laws and regulations from the US and other
countries. Diversion contrary to law is
prohibited.
Introduction
With the Nokia Bluetooth Stereo
Headset BH-214, you can make and
answer calls hands-free with your
compatible mobile device. You can
without cables. The headset and the
other device do not need to be in line
of sight, but they should be within 10
metres (33 feet) of each other.
also listen to music from a compatible Connections may be subject to
music player.
interference from obstructions, such
as walls, or other electronic devices.
Read this user guide carefully before
using the headset. Also, read the user The headset is compliant with the
guide for the device that you connect Bluetooth Specification 2.1 + EDR
to the headset.
supporting the following profiles:
Headset Profile 1.2, Hands-Free
Profile (HFP) 1.5, Advanced Audio
Distribution Profile (A2DP) 1.2, and
Audio Video Remote Control Profile
1.0. Check with the manufacturers of
other devices to determine their
compatibility with this device.
This product may contain small parts.
Keep them out of the reach of small
children. The surface of this device is
nickel-free.
Bluetooth wireless technology
Bluetooth wireless technology allows
you to connect compatible devices
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
Get started
The headset contains the following
parts shown on the title page: 3.5 mm
audio connector (1) for headphones,
microphone (2), power key (3),
indicator light (4), answer/end key (5),
rewind key (6), play/pause key (7),
forward key (8), clip (9), charger
connector (10), volume up key (11),
and volume down key (12).
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
Warning: Use only chargers
approved by Nokia for use
with this particular model.
The use of any other types may invalidate
any approval or warranty, and may be
dangerous.
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
When you disconnect the power cord of
any accessory, grasp and pull the plug,
not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector (14). The red
indicator light is displayed during
charging. Charging the battery
fully may take up to 2 hours.
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
Switch on or off
To switch on, press and hold the power
key for about 2 seconds. The headset
beeps, and the green indicator light is
displayed. The headset tries to
connect to the last connected mobile
device.
The fully charged battery has power
for up to 8 hours of talk time, up to
300 hours of standby time, or up to 7
hours of music playing time.
To switch off, press and hold the
power key for about 5 seconds. The
headset beeps, and the red indicator
light is briefly displayed. If the headset
is not connected to a device within
about 30 minutes, it switches off
automatically.
To check the battery charge when the
headset is not connected to a charger,
press the answer/end key when the
headset is switched on and no call is
in progress. If the indicator light is
green, the charge level is sufficient. If
the light is yellow, you may need to
Pair and connect the headset
recharge the battery soon. If the light Before using the headset, you must
is red, recharge the battery.
pair and connect it with a compatible
device.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
If your mobile device supports the
A2DP Bluetooth profile and has a
music player feature, you can use the
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
device to also play music through the 4. Select the headset from the list of
headset.
found devices.
If your mobile device does not support 5. If necessary, enter the passcode
the A2DP profile, you can separately
pair the headset with the mobile
device and a music player that
supports this profile. If you have
paired and connected the headset
with your mobile device, disconnect
the headset from it before pairing the
headset with the music player.
0000 to pair and connect the
headset to your device. If your
device does not have a keypad, it
may use this passcode by default.
In some devices, you may need to
make the connection separately
after pairing.
When the headset is connected to
your device and is ready for use, the
blue indicator light flashes slowly.
1. Ensure that your mobile device or
music player is switched on and
the headset is off.
You can pair the headset with up to
eight devices but connect it to only
one device supporting the HFP profile
and another device supporting the
A2DP profile at a time.
2. Press and hold the power key (for
about 5 seconds) until the blue
indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
Bluetooth devices.
To manually connect the headset to
the last used device that supports the
HFP profile (for example, after
connection loss), switch the headset
off and on, or press and hold the
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
answer/end key for about 2 seconds.
You may be able to set your device so
To manually connect the headset to a that the headset connects to it
device that supports the A2DP profile, automatically. To activate this feature
press the play/pause key.
in a Nokia device, change the paired
device settings in the Bluetooth menu.
Basic use
Wear the headset
Adjust the volume
Plug a pair of headphones into the
audio connector (15).
To adjust the headset volume, press
the volume up or down key during a
call or while listening to music. To
adjust the volume quickly, press and
hold either key.
Use the clip to attach the headset to
your clothing. Place the right
headphone cable (indicated with R)
over your shoulders, and gently insert You can also adjust the headset
the earplugs into your ears (13). Place volume on the connected A2DP device
the headset within about 30 cm (11.81 if it supports this feature.
inches) from your mouth.
Calls
Warning: When you use the
To make a call, use your mobile device
headset, your ability to hear
in the normal way when the headset is
connected to it.
outside sounds may be
affected. Do not use the headset where it
can endanger your safety.
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
To redial the number you last called (if
your mobile device supports this
feature with the headset), when no
call is in progress, press the answer/
end key twice.
Listen to music
To listen to music, connect the
headset to a compatible music player
that supports the A2DP Bluetooth
profile.
To activate voice dialling (if your
mobile device supports this feature
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds. Proceed
as described in the user guide of the
mobile device.
The available music functions depend
on your music player.
If you receive or make a call while
listening to music, the music is paused
until you end the call.
Warning: Listen to music at
a moderate level. Continuous
exposure to high volume may
damage your hearing.
To answer or end a call, press the
answer/end key. To reject a call, press
this key twice.
To play a song, select it in the music
player, and press the play/pause key.
To switch a call from the headset to a
compatible mobile device, press and
hold the answer/end key for about 2
seconds, or switch off the headset. To
switch the call back to the headset,
press and hold the answer/end key for
about 2 seconds, or switch on the
headset.
To pause or resume playing, press the
play/pause key. To stop playing, press
and hold the play/pause key.
To select the next song during
playback, press the forward key. To
select the previous song, press the
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
rewind key twice. To scroll through the hold the power key and the answer/
current song quickly, press and hold
either key.
end key (for about 5 seconds) until the
red and green indicator lights start to
alternate.
Turn lights on or off
To reset the headset if it stops
functioning, even though it is charged,
connect the headset to a charger
while you press and hold the power
key.
By default, the indicator lights are
shown in all situations. To turn the
lights off in some situations (for
example, during a call or when the
headset is connected to a mobile
device) or back on, press and hold the
power key and the answer/end key for
about 5 seconds when the headset is
connected to a device.
Troubleshooting
If you cannot connect the headset to
your compatible device, check that
the headset is charged, switched on,
and paired with the device.
Clear settings or reset
To clear the volume and pairing
settings from the headset, press and
Battery and charger information
This device has an internal,
the device as you may damage the
nonremovable, rechargeable battery. Do device. This device is intended for use
not attempt to remove the battery from
when supplied with power from the
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
following chargers: AC-3, AC-4, AC-5,
connected to a charger, since
AC-8, DC-4, and DC-9. The exact charger overcharging may shorten its lifetime. If
model number may vary depending on
the type of plug. The plug variant is
identified by one of the following: E, EB,
X, AR, U, A, C, or UB. The battery can be
charged and discharged hundreds of
times, but it will eventually wear out.
Recharge your battery only with Nokia
approved chargers designated for this
device. Use of an unapproved charger
may present a risk of fire, explosion,
leakage, or other hazard.
left unused, a fully charged battery will
lose its charge over time.
Always try to keep the battery between
15°C and 25°C (59°F and 77°F). Extreme
temperatures reduce the capacity and
lifetime of the battery. A device with a
hot or cold battery may not work
temporarily. Battery performance is
particularly limited in temperatures well
below freezing.
Do not dispose of batteries in a fire as
they may explode. Batteries may also
explode if damaged.
If a battery is being used for the first time
or if the battery has not been used for a
prolonged period, it may be necessary to
connect the charger, then disconnect and
reconnect it to begin charging the
battery. If the battery is completely
discharged, it may take several minutes
before the charging indicator light is
displayed.
Never use any charger that is damaged.
Important:Battery operating
times are estimates only and
depend on network
conditions, features used, battery age
and condition, temperatures to which
battery is exposed, and many other
factors.
Unplug the charger from the electrical
plug and the device when not in use. Do
not leave a fully charged battery
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
Care and maintenance
Your device is a product of superior
design and craftsmanship and should be
treated with care. The following
suggestions will help you protect your
warranty coverage.
temperature, moisture can form
inside the device and damage
electronic circuit boards.
•
•
Do not attempt to open the device.
Do not drop, knock, or shake the
device. Rough handling can break
internal circuit boards and fine
mechanics.
•
Keep the device dry. Precipitation,
humidity, and all types of liquids or
moisture can contain minerals that
will corrode electronic circuits. If your
device does get wet, allow it to dry
completely.
•
•
Do not use harsh chemicals, cleaning
solvents, or strong detergents to
clean the device.
•
•
Do not use or store the device in
dusty, dirty areas. Its moving parts
and electronic components can be
damaged.
Do not paint the device. Paint can
clog the moving parts and prevent
proper operation.
These suggestions apply equally to your
device, charger, or any accessory. If any
device is not working properly, take it to
the nearest authorised service facility for
service.
Do not store the device in hot areas.
High temperatures can shorten the
life of electronic devices, damage
batteries, and warp or melt certain
plastics.
•
Do not store the device in cold areas.
When the device returns to its normal
ownload from Www.Somanuals.com. All Manuals Search And Downloa
ENGLISH
Recycle
browsing on a mobile device,
The crossed-out wheeled-bin
symbol on your product, battery,
literature, or packaging reminds
you that all electrical and electronic
products, batteries, and accumulators
must be taken to separate collection at
the end of their working life. This
requirement applies in the European
Union. Do not dispose of these products
as unsorted municipal waste. For more
environmental information, see the
product Eco-Declarations at
Always return your used electronic
products, batteries, and packaging
materials to a dedicated collection point.
This way you help prevent uncontrolled
waste disposal and promote the recycling
of materials. More detailed information
is available from the product retailer,
local waste authorities, national
producer responsibility organisations, or
your local Nokia representative. Check
how to recycle your Nokia products at
ownload from Www.Somanuals.com. All Manuals Search And Downloa
|
