Nilfisk P 130.1/150.1/160.1
Nilfisk P 130.1/150.1/160.1 X-TRA
User Manual
128303204 c
Download from Www.Somanuals.com. All Manuals Search And Download.
We congratulate you on your new Nilfisk High Pressure Washer
We are confident that the new high pressure washer of Nilfisk will justify your expectations of quick and
effective cleaning. Now you have a cleaning device which will facilitate your future cleaning tasks and make
them more effective. Many tasks which were previously difficult, can now be solved in a few minutes and
with a much better result.
If, contrary to expectations, problems should arise which cannot be remedied by means of the information
in section 8.0, the Nilfisk service organization will be at your disposal.
Nilfisk is a global concern with a comprehensive knowledge within development and manufacturing of ef-
fi cient and environmentally friendly cleaning solutions. Our product range comprises cleaning solutions for
selected customer groups - from machines for domestic use to big industrial cleaning systems.
The expertise of Nilfisk is cleaning focusing the need of the customer. Our wish is that you as a custom-
ers should feel quite confident that the cleaning equipment you buy from us is the most efficient and that it
fulfils all of your expectations.
Best regards
Nilfisk
Division of Nilfisk-Advance A/S
Model survey
(P 12 476)
Fields of application EN
1. Electric cable
2. Start-/stop switch
3. Connection for high pressure hose (only PRO
130/150/160)
4. Connection for water (with filter)
5. High pressure hose
The applications for this product are domestic clean-
ing jobs:
Car, motorbike, boat, caravan, trailer, patio/drive/
flagstones, woodwork, brickwork, barbecue,
garden furniture etc.
6. Spray gun with trigger (6a) and locking device
(6b)
7. Spray lance with bayonet socket
8. TORNADO® PR nozzle
9. POWERSPEED® nozzle
10. Needle for cleaning of nozzle
11. Detachable container for detergents
12. Dosing regulator for detergents
13. Pressure gauge (not available on model B)
14. Regulation of pressure / water volume (not
available on model B)
Contents
EN
1.0 Preparation .................................................... 4
2.0 Operating instructions.................................... 5
3.0 Accessories ................................................... 7
4.0 Maintenance .................................................. 8
5.0 Storage .......................................................... 8
6.0 Recycling the washer..................................... 8
7.0 Questions - and answers ............................... 8
8.0 Trouble shooting guide................................... 9
9.0 Warranty ..................................................... 10
15. Hose reel (only PRO 130/150/160 X-TRA)
16. Hose storage (only PRO 130/150/160)
Specifications: See model tag of machine.
Sound pressure level measured in accordance with
ISO 3744, EEC Directive 2000/14/EEC:
P 130.1: LpA = 80 dB(A), LWA = 90 dB(A).
P 150.1: LpA = 80 dB(A), LWA = 93 dB(A).
P 160.1: LpA = 80 dB(A), LWA = 95 dB(A).
Hand/arm vibrations measured according to ISO
5349 is < 2.5 m/s2.
We reserve the right to alter the specifications.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.0 Preparation
EN
Before starting up your high pressure washer, we
advise you to carefully read through this instruction
manual. Follow all instructions to minimize the risk
of injuries when using the machine.
Extension cable
Extension cables should be of a watertight con-
struction and comply with the below-mentioned
requirements for length and cable dimensions.
1,5 mm²
2,5 mm²
max
max
20
30
m
m
Prior to operation
Before you start up your new machine for the first
time, you must mount the holder for the spray lance.
It is fixed at the top of the transport handle.
• Cable connections should be kept dry and off the
ground.
• Always uncoil the extension cable completely to
avoid heat damage to the cable.
Water connection
Connect the high pressure washer by means of a
water hose to the water tap (pressure of inlet wa-
ter, max. 10 bar - temperature of inlet water, max.
60°C).You may use an ordinary ½" garden hose of
min. 10 m and max. 25 m. Attach the hose using
a quick connector. NOTE: Connection to the public
mains according to regulations.
1
2
1. Insert the holder in the recess of the handle (see
This high pressure washer is only allowed
to be connected with the drinking water
illu.).
2. Fix the holder with the screw.
mains, when an appropriate backflow
preventer has been installed, Type BA according to
EN 1717. The backflow preventer can be ordered
under number 106411177. The length of the hose
between the backflow preventer and the high pres-
sure washer must be at least 10 metres to absorb
possible pressure peaks (min diameter ½ inch).
Operation by suction (for example from a rainwater
vessel) is carried out without backflow preventer.
Recommended suction set: 126411387.
Mount water filter and water inlet connection (4).
PRO 130/150/160 X-TRA: Mount the handle for the
hose reel.
Before starting up your machine please check it
carefully for any defects. If you find any, do not start
up your machine and contact your Nilfisk distributor.
As soon as water has flown through the BA valve,
this water is not considered to be drinking water any
more.
Especially check:
• The insulation of the electric cable should be
faultless and without any cracks. If the electric
cable is damaged, it should be replaced by an
authorized Nilfisk distributor.
IMPORTANT! Only use water without any impu-
rities. If there is a risk of running sand in the inlet
water (i.e. from your own well), a filter should be
mounted.
Mains power connection
The following should be observed when connecting
the high pressure washer to the electric installation:
• Only connect the machine to an installation with
earth connection.
• The electric installation shall be made by a certi-
fied electrician.
• It is strongly recommended that the electric sup-
ply to this machine should include a residual
current device (GFCI).
Safety precautions
• WARNING! High pressure jets can
be dangerous. Never direct the wa-
ter jet at persons, pets, live electri-
cal equipment or the machine itself.
• The operator and anyone in the im-
mediate vicinity of the site of clean-
ing should take action to protect
themselves from being struck by
debris dislodged during operation.
Wear goggles during operation.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation EN
Operating Instructions EN
• Never try to clean clothes or footwear on yourself
or other persons.
2.3 Start
1. Check that the machine is in vertical position.
2. Activate the trigger of the spray gun (6a) and let
the water run out until any air has escaped from
the inlet hose.
• Do not let children or people who have not read
the instruction manual operate the machine.
• Never use the machine in an environment where
there could be a danger of explosion. If any doubt
arises, please contact the local authorities.
• It is not allowed to clean asbestos-containing
surfaces with high pressure.
3. Turn the start/stop switch (2) to pos. I.
2.4 Operation
1. Always hold the spray lance
firmly with both hands! The spray
lance is affected by a longitudinal
thrust of up to 16.4 N when the high
pressure washer is operated.
Safety devices
Locking device on spray gun
The spray gun features a locking device (6b). When
the pawl is activated, the spray gun cannot be ope-
rated.
2. Point the nozzle at the ground!
3. Activate the trigger of the spray gun (6a).
4. Always adjust the distance and thus the pres-
sure of the nozzle to the surface which is to be
cleaned. NOTE: The pressure can be regulated
on the TORNADO® PR nozzle or the button for
regulation of pressure / water volume (14).
Thermal sensor:
A thermal sensor protects the motor against over-
loading. The machine will restart after a few minutes
when the thermal sensor has cooled.
Pressure safety device
An integrated hydraulic safety valve protects the
system from excessive pressure
High pressure
Low pressure
2.0 Operating Instructions
NOTE: Do not cover the machine during operation. If
the machine is left or not used for 5 minutes, it must
be switched off on the start/stop switch (2) pos. O.
2.1 Operating facilities
• Start-/stop rotary switch (2).
• Spray gun (6) with trigger (6a) and locking device
(6b).
• Dosing regulator for detergents (12).
• Regulation of pressure / water volume (14). (not
available on model B)
Operation with detergents
Application of detergents is NOT possible if an
extension hose is applied.
1. Fill the container with a detergent.
2. Mount the TORNADO® PR nozzle and adjust it to
low pressure (see section 2.4.4).
2.2 Connection
1. PRO 130/150/160: Attach the high pressure hose
(5) to the connection for high pressure hose (3).
Only use one extension hose of max. 7 m.
PRO 130/150/160 X-TRA: Unwind the high pres-
sure hose completely.
3. Adjust the dosing regulator (12) to the required
volume of detergent (0-5%).
4. Apply the detergent from below and upwards.
5. Let the detergent act for the time stated on the
packing of the detergent and flush with pure water.
2. Attach the nipple of the high pressure hose to the
spray gun quick coupling.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions EN
Separate detergent container
1. Remove the cover with suction hose from the
detergent container.
like, an external suction filter should be mounted.
For further information, please contact your nearest
Nilfisk distributor.
2. Mount the cover with suction hose on the separate
detergent container.
2.7 End of operation
1. Stop the machine by turning the start/stop switch
(2) to pos. O.
2. Disconnect the plug from the socket.
3. Shut off the water supply and activate the trigger
(6a) to relieve the machine of pressure.
Concerning storage, please refer to section 5.0.
The cover has a standard thread and fits common
detergent containers. If your container does not have
a standard thread, detach the filter from the suction
hose and remove the cover. Remount the filter in the
suction hose.
Extra detergent hose can be pulled out of the ma-
chine.
2.5 Regulation of pressure / water
volume
This function is not available on model B.
Working pressure and water volume can be regu-
lated on the machine by turning the button for regu-
lation of pressure / water volume (14). The pressure
can be read on the pressure gauge (13).
2.6 Suction mode
The machine can take in water from a rain water
butt as an example. In the suction mode, the inlet
hose must be filled with water before starting up the
machine. The water inlet hose must not be too long,
approx. 5 m.
1. Make sure that the water butt is not placed on a
lower level than the machine.
2. Attach the water inlet hose to the machine and
place the other end of it in the water butt.
3. Start the machine.
4. Detach the spray lance and activate the trigger of
the spray lance. Keep the trigger activated until
water has come out for approx. 15 seconds.
5. Remount the spray lance and the machine is
ready for operation.
NOTE: The internal filter of the machine is not
intended for the filtration of large quantities of im-
purities. If the water contains leaves, sand or the
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3.0 Accessories
EN
Wall hook
For suspension of
your high pressure
washer on the wall.
Standard Equipment
Only use original accessories.
Nozzles
Attached with the bayonet
coupling system. Stored on
the machine.
Universal adjustable nozzle.
Turn to the left:
Water suction kit
For removal of
large amounts of water from
e.g. garden pounds.
Tornado® PR (8)
high pressure.
Turn to the right:
low pressure.
Detergents
Powerspeed® (9)
Nozzle with rotating jet for
stubborn dirt on hard sur-
faces.
Only use original accessories.
Stone & Wood
Cleaner
For flagstones, brick- and
woodwork.
Extra Equipment
Suitable for moss and algae.
Extension hose
7 m extension hose increas-
ing the working range.
Plastic Cleaner
Metal Cleaner
For plastic and synthetic
materials such as garden
furniture.
Brushes
For cars and
other surfaces.
Available in
For cleaning of metal such as
garden tools.
more shapes.
Car Combi Cleaner For cars etc. With rinsing wax.
Tube cleaner
Water-sand-
15 m long tube cleaner for the
cleaning of tubes and drains.
Alu Cleaner
For surfaces of aluminium.
Applied with an atomizer.
For removal of paint and rust.
Oil & Grease
Cleaner
For cleaning of grease and
oil on motors for instance.
Applied with an atomizer.
blasting equipment Sand available from do-it-
yourself shops.
Patio Plus
Equipment for
quick and regular
cleaning of hori-
zontal (tiles etc.)
and vertical sur-
faces.
Wood Cleaner
For cleaning of wooden sur-
faces incl. of wooden garden
furniture.
Garden brush
Rim brush
Rotating brush for cleaning of
wooden surfaces.
Rotating brush for
cleaning of wheel
rims.
Underchassis
spray lance
Special spray lance for under-
chassis cleaning.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.0 Maintenance
EN
6.0 Recycling the washer
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
• Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
Make the old cleaner unusable immedi-
ately.
1. Unplug the cleaner and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specified in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why cleaning is required immediately. recycled ecologically.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning needle (10).
IMPORTANT: The needle should only be used
when the spray lance is detached!
Contact your local authorities or your nearest dealer
for further information.
3. Flush the spray lance backwards with water.
7.0 Questions and answers
4.2 Cleaning of water inlet filter
Clean the water inlet filter regularly once a month or
more frequently according to use.
Why do I have to use an atomizer for some deter-
gents?
1. Detach water inlet hose and coupling (4).
2. Pull out the filter and rinse it carefully.
3. Check that it is intact before re-mounting it.
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
5.0 Storage
EN
The machine should be stored in a frost-free
room!
Pump, hose and accessories should always be
emptied of water prior to storing as follows:
1. Stop the machine (rotary switch (2) in pos. O)
and detach water hose and accessory.
2. Restart the machine and activate the trigger.
Let the machine run until no more water runs
through the spray gun.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up without bending it.
3. Stop the machine and unplug. Wind the elec-
tric cable round the hooks placed on the side
of the machine.
4. Separate spray gun and high pressure hose.
5. PRO 130/150/160: Detach high pressure hose,
coil it up and place it on the hose storage.
PRO 130/150/160 X-TRA: Coil the high pres-
sure hose up on the hose reel.
May I use an ordinary detergent in my high pres-
sure washer?
No.You may damage the cleaner and achieve a bad
result. The detergents of Nilfisk have been specially
developed for use with a high pressure washer and
ensures a correct dosage and a quick effect.
6. Place spray gun, nozzles and other accesso-
ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
Can I do anything special to keep my high pressure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8.0 Trouble shooting guide
EN
To avoid unnecessary disappointments, you should check the following before contacting the
Nilfisk service organisation:
Symptom
Cause
Recommended action
Machine refuses to start Machine not plugged in
Defective socket
Plug in machine.
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cable.
Fuse has blown
Defective extension cable
Machine stops
Fuse has blown
Incorrect mains voltage
Replace fuse. Switch off other machines.
Check that the mains voltage corresponds to
specification on the model tag.
Wait - the machine will start after a few
minutes.
Thermal sensor activated
WARNING! The trigger of the spray gun
must not be activated.
Fuse blows
Fuse too small
Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating
Air in inlet hose/pump
Allow machine to run with open trigger until
regular working pressure resumes.
Check that the water supply corresponds to
specifications required (see model tag)
NB! Avoid using long, thin hoses (min 1/2")
Clean the nozzle (see section 4.1)
Clean the filter (see section 4.2)
Inadequate supply of
mains water
Nozzle partially blocked
Water filter blocked
Hose kinked
Straighten out hose.
High pressure hoses too long Disconnect high pressure extension hoses
and retry. (Extension hose max. 7 m).
Machine often starts
and stops by itself
Pump/spray gun is
leaking
Contact your nearest Nilfisk Service Centre.
Machine starts, but
no water comes out
Pump/hoses or accessory
frozen
No water supply
Water filter blocked
Nozzle blocked
Wait for pump/hoses or accessory to thaw.
Connect inlet water.
Clean the filter (see section 4.2)
Clean the nozzle (see section 4.1)
Pump pressure drops
Button for regulation of
pressure / water volume not
correctly adjusted
Adjust the button to correct working pressure.
(not available on model B)
In case problems other than the above occur, please contact your local Nilfisk distributor.
UK:
Customer Services at Penrith - 01768 868995
9
Download from Www.Somanuals.com. All Manuals Search And Download.
9.0 Warranty conditions
EN
Nilfisk guarantees high pressure washers for do-
mestic use for 2 years. If your high pressure washer
or accessories are handed in for repair, a copy of
the receipt must be enclosed.
Guarantee repairs are being made on the following
conditions:
z that defects are attributable to flaws or defects in
materials or workmanship. (wear and tear as well
as misuse are not covered by the guarantee).
z that the directions of this instruction manual have
been thoroughly observed.
z that repair has not been carried out or attempted
by other than Nilfisk-trained service staff.
z that only original accessories have been applied.
z that the product has not been exposed to abuse
such as knocks, bumps or frost.
z that only water without any impurities has been
used.
z that the high pressure washer has not been used
for rental nor used commercially in any other way.
Repairs under this guarantee include replacement
of defective parts, exclusive of packing and post-
age/carriage. Besides, we refer to your national law
of sale.
The machine should be forwarded to one of the
service centres of the Nilfisk organisation with
description/specifi cation of the fault.
Repairs not covered by the guarantee conditions
will be invoiced. (I.e. malfunctions due to Possible
Causes mentioned in section Troubleshooting
Chart of the instruction manual).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6
6b
7
6a
9
8
5
15
16
10
13
2
1
11
12
14
4
3
Download from Www.Somanuals.com. All Manuals Search And Download.
GERMANY
POLAND
Nilfisk-ALTO
Nilfisk-Advance Sp. Z.O.O.
05-800 Pruszków
ul. 3-go MAJA 8
Division of Nilfisk-Advance AG
Guido-Oberdorfer-Str. 10
89287 Bellenberg
Tel.: (+49) 180 5 37 37 37
E-mail: info.de@nilfisk-alto.com
Tel.: +48 22 738 37 50
PORTUGAL
Nilfisk-Advance
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1° A
P2710-089 Sintra
Tel.: +35 121 911 2670
E-mail: mkt.pt@nilfisk-advance.com
GREECE
Nilfisk-Advance SA
8, Thoukididou str.
164 52 Argiroupolis
Tel.: +30 210 911 9600
E-mail: nilfi[email protected]
HEAD QUARTER
DENMARK
Nilfisk-Advance Group
Sognevej 25
DK-2605 Brøndby
HOLLAND
RUSSIA
Tel.: (+45) 4323 8100
E-mail: mail.com@nilfisk-advance.com
Nilfisk-Advance
Нилфиск-Эдванс
127015 Москва
Вятская ул. 27, стр. 7
Россия
Versterkerstraat 5
1322 AN Almere
Tel.: (+31) 36 546 07 00
E-mail: info.nl@nilfisk-advance.com
SALES COMPANIES
Tel.: (+7) 495 783 96 02
E-mail: info@nilfisk.ru
ARGENTINA
Nilfisk-Advance srl.
HONG KONG
Edificio Central Park
Nilfisk-Advance Ltd.
Room 2001 HK Worsted Mills
Industrial Building
SINGAPORE
Herrera 1855, Office 604
Ciudad Autónoma de Buenos Aires
Tel.: (+54) 11 6091 1571
Nilfisk-Advance Pte. Ltd.
40 Loyang Drive
31-39 Wo Tong Tsui Street
Kvai Chung
Tel.: (+852) 24 27 59 51
Singapore 508961
Tel.: (+65) 6759 9100
AUSTRALIA
Nilfisk-Advance
SPAIN
48 Egerton St.
HUNGARY
Nilfisk-Advance S.A.
Torre D’Ara
P.O. Box 6046
Nilfisk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Tel: (+36) 24475 550
Silverwater, N.S.W. 2128
Tel.: +61 2 8748 5900
E-mail: info@nilfisk-advance.com.au
Paseo del Rengle, 5 Pl. 10
08302 Mataró
Tel.: (+3) 4 93 741 2400
E-mail: mkt.es@nilfisk-dvance.com
E-mail: info@nilfisk-advance.hu
AUSTRIA
Nilfisk-Advance GmbH
Metzgerstrasse 68
5101 Bergheim bei Salzburg
Tel.: 0662 456 400-14
E-mail: info.at@nilfisk-advance.com
INDIA
SWEDEN
Nilfisk-Advance
Sjöbjörnsvägen 5
100 73 Stockholm
Tel.: (+46) 85 55 944 00
E-mail: info.se@nilfisk.com
Nilfisk-Advance India Limited
349, Business Point,
No 201,2nd floor, above Popular Car World,
Western Express High way, Andheri ( East),
Mumbai - 400 069
BELGIUM
Tel.: (+91) 223 2174592
Nilfisk-Advance n.v-s.a.
Riverside Business Park
Boulevard Internationalelaan 55
Bâtiment C3/C4 Gebouw
Bruxelles 1070
SWITZERLAND
IRELAND
Nilfisk-Advance
Nilfisk-Advance
1 Stokes Place
St. Stephen’s Green
Dublin 2
Ringstrasse 19
Kircheberg/Industri Stelzl
9500 Wil
Tel.: (+32) 2 467 60 50
E-mail: info.be@nilfisk-advance.com
Tel.: (+41) 719 23 84 44
E-mail: info.ch@nilfisk-advance.com
Tel.: (+35) 3 12 94 38 38
CANADA
ITALY
TAIWAN
Nilfisk-Advance
Nilfisk-Advance SpA
Nilfisk-Advance Taiwan Branch
1F, No. 193, sec. 2, Xing Long Rd.
Taipei
240 Superior Boulevard
Mississauga, Ontario L5T 2L2
Tel.: (+1) 905 564 1149
E-mail: [email protected]
Strada Comunale della Braglia, 18
26862 Guardamiglio (LO)
Tel.: +39 0377 41 40 46
E-mail: mercato.italia@nilfisk-advance.it
Tel.: (+88) 6227 002 268
THAILAND
CHILE
JAPAN
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Tel.: (+66) 2 275 5630
Nilfisk-Advance de Chile
San Alfonso 1462
Nilfisk-Advance Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku
Yokohama, 223-0059
Tel.: (+81) 45 548 2571
Santiago
Tel.:(+56) 2 684 5000
E-mail: Pablo.Noriega@nilfisk-advance.com
KOREA
TURKEY
CHINA
Nilfisk-Advance
Nilfisk-Advance Profesional Temizlik
Ekipmanlari Tic. A/S.
Necla Cad. No. 48
Nilfisk-Advance (Suzhou)
Building 18, Suchun Industrial Estate
Suzhou Industrial Park
215021 Suzhou
Kumwon B/D 3F, 471-4, Gunja-Dong
Gwangjin-Ku
Tel.: (+82) 2497 8636
Yenisahra / Kadiköy
Istanbul
Tel.: (+90) 216 470 08 - 60
E-mail: info.tr@nilfisk-advance.com
Tel.: (+86) 512 6265 2525
MALAYSIA
Nilfisk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
CZECH REPUBLIC
Nilfisk-Advance
UNITED KINGDOM
Nilfisk-Advance Ltd.
Unit 24
VGP Park Horní Počernice
Do Čertous 1/2658
193 00 Praha 9
52200 Kuala Lumpur
Tel.: (+603) 62753120
Hilllside Business Park
Kempson Way
Tel.: (+420) 24 14 08 419
Bury St. Edmunds
MEXICO
DENMARK
Suffolk IP32 7EA
Nilfisk-Advance de Mexico, S. de R.L. de C.V.
Prol. Paseo de la Reforma 61, 6-A2
Col. Paseo de las Lomas
Nilfisk-Advance A/S
Industrivej 1
Tel.: (+49) 01284 763163
E-mail: sales.uk@nilfisk-advance.com
9560 Hadsund
01330 Mexico, D.F.
Tel: +52 55 2591 1002 (switchboard)
E-mail: [email protected]
Tel.: +45 7218 2100
E-mail: salg.dk@nilfisk-advance.com
UNITED ARAB EMIRATES
Nilfisk-Advance Middle East Branch
SAIF-Zone
FINLAND
P.O. Box 122298
NEW ZEALAND
Nilfisk-Advance
Danish House
6 Rockridge Avenue
Penrose, Auckland 1135
Tel.: (+64) 95 25 00 92
Nilfisk-Advance Oy Ab
Piispantilankuja 4
Sharjah
Tel.: (+971) 553 2626 82
02240 Espoo
Tel.: +358 207 890 600
E-mail: asiakaspalvelu.fi@nilfisk.com
USA
Nilfisk-Advance Inc.
14600 21st Avenue North
Plymouth, MN 55447-3408
Tel.: (+1) 763 745 3500
FRANCE
Nilfisk-Advance
26 Avenue de la Baltique
Villebon sur Yvette
91944 Courtabouef Cedex
Tel.: (+33) 1 69 59 87 00
E-mail: info.fr@nilfisk-advance.com
NORWAY
Nilfisk-Advance AS
Bjørnerudveien 24
1266 Oslo
VIETNAM
Tel.: (+47) 22 75 17 70
E-mail: info.no@nilfisk.com
Nilfisk-Advance Representative Office
No. 51 Doc Ngu Str.
Ba Dinh Dist.
Hanoi
Tel.: (+04) 761 5642
E-mail: nilfi[email protected]
Download from Www.Somanuals.com. All Manuals Search And Download.
|