08.01.2007
Nilfisk-ALTO C 120.1
User manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
1
2
3
4
5
Safety precautions and warnings .............................................3
Description ...............................................................................4
Before you start using your pressure washer...........................5
Operating your pressure washe ...............................................6
Fields of Application
and Working Methods...............................................................8
After using your pressure washe............................................10
Maintenance...........................................................................11
Trouble Shooting ....................................................................13
Further information.................................................................14
6
7
8
9
10 EC Declaration of Conformity.................................................16
1 Safety Precautions and Warnings
Symbols used to mark in-
structions
Before starting up
your high-pres-
sure washer for
the first time, this
instruction manual
This symbol is
used to mark safety
instructions that
must be observed
to prevent damage
,
must be read through carefully.
Save the instructions for later
use.
to the machine and its perform-
ance.
This symbol
indicates tips
and instructions
Safety instructions
marked with this
symbol must be
observed to pre-
to simplify work and to ensure a
safe operation.
vent danger to persons.
WARNING!
z Never use the machine in
an environment where there
could be a danger of explo-
sion. If any doubt arises,
please contact the local
authorities.
z High pressure jets can be
dangerous. Never direct the
water jet at persons, pets,
live electrical equipment or
the machine itself.
Do not let children or people
who have not read the instruc-
tion manual operate the ma-
chine.
z Never try to clean clothes or
footwear on yourself or other
persons.
z Hold the spray lance firmly
with both hands. The spray
lance is affected by a thrust
of up to 26.5 Nm during ope–
ration.
z The operator and anyone in
the immediate vicinity of the
site of cleaning should take
action to protect themselves
from being struck by debris
dislodged during operation.
Wear goggles during opera-
tion.
z It is not allowed to clean as-
bestos-containing surfaces
with high pressure.
z This high pressure washer
must not be used at tempera-
tures below 0°C.
z Never let any persons stay
under the product when
stored on the wall.
Before starting up your machine
please check it carefully for any
defects. If you find any, do not
start up your machine and con-
tact your ALTO distributor.
Especially check:
z The insulation of the electric
cable should be faultless
and without any cracks. If the
electric cable is damaged, an
authorized Nilfisk-ALTO dis-
tributor should replace it.
WARNING!
Inadequate extension cables
can be dangerous. Cables on
drums should always be com-
pletely unwinded to prevent the
cable from overheating.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Extension cables should be of
a watertight construction and
comply with the below-men-
tioned requirements for length
and cable dimensions.
z Only connect the machine to
an installation with earth con-
nection.
z The electric installation shall
be made by a certified elec-
trician.
z It is strongly recommended
that the electric supply to this
machine should include a re-
sidual current device (GFCI).
Repair and maintenance
Always remove the electric
plug from the socket before car-
rying out maintenance work on
the machine.
1.0 mm² max.
1.5 mm² max.
2.5 mm² max.
12.5 m
20 m
30 m
Safety devices
Locking device on spray gun
(7a) (see foldout at the end of
this manual):
z Cable connections should be
kept dry and off the ground.
The spray gun features a lock-
ing device. When the pawl is
activated, the spray gun cannot
be operated.
Water connection
Connection to the public mains
according to regulations.
Mains power connection
IMPORTANT! Only use wa-
ter without any impurities. If
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional filter
should be mounted.
Thermal sensor:
A thermal sensor protects the
motor against overloading. The
machine will restart after a few
minutes when the thermal sen-
sor has cooled.
The following should be ob-
served when connecting the
high pressure washer to the
electric installation:
2 Description
2.1 Application
This high-pressure washer has
been developed for domestic
use within:
the high-pressure washer for
vaious cleaning jobs.
Only use the high-pressure
washer for purposes described
in this manual.
-
Car, Motorbike, boat, cara-
van, trailer, patio/drive/flags-
tones, woodwork, brickwork,
barbecue, garden furniture,
lawn mower
The safety precautions must be
observed to prevent damage
to the machine, the surface to
be cleaned or severe personal
injuries.
Section 5 describes the use of
2.2 Operation elements
and model survey
See foldout at the end of this
manual.
11 Nozzle cleaning tool
12 Trolley Handle
13 Hose reel (not standard)
14 Hose hook
1 Start/stop switch
2 Water inlet (with filter)
3 High pressure connection
4 High pressure hose
5 Electric cable
15 Model tag
Specifications: See model tag
(15) of machine.
6 Click & Clean spray lance
7 Spray gun with lock
8 Click & Clean Tornado PR
Sound pressure level measured
in accordance with ISO 3744,
EEC Directive 2000/14/EEC: LpA
= 71.3 dB(A), LWA = 86 dB(A).
®
nozzle
®
9 Click & Clean Powerspeed
nozzle
10 Click & Clean foam sprayer
We reserve the right to alter the
specifications.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Before you start using your
pressure washer
3.1 Mounting of trolley
handle (models with
trolley handle)
1. Remove the label on top of
machine.
2. Push down the trolley handle
(12) into the machine. Secure
the handle by tightening the
2 screws.
ꢀꢁ
ꢀꢂ
3. Mount the hose hook (14)
on the handle (3 screws).
Note: the hose hook can be
mounted on the front as well
as on the back. Front position
is to be used if the product is
used together with a special
wall hook for wall storage.
3.2 Mounting of hose reel
handle
1. Click the hose reel handle
on to the trolley handle (no
screws).
3.3 Mounting of quick
coupling
1. Screw the quick coupling
tight on to the water inlet (2).
Note: The inlet filter must al-
ways be fitted in the water inlet
pipe to filter out sand, limestone
and other impurities as these
will damage the pump valves.
Caution: Failure
to fit the filter will
invalidate the
guarantee.
,
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Mounting of high pres-
sure hose
Attach the high pressure hose
(4) to the spray gun (7).
Detach the high pressure hose
by pressing the pawl (A).
4 Operating your pressure washer
4.1 Connection of high pres-
sure hose
1. Mount the high pressure
hose on the outlet (3).
4.2 Mounting of spray
lance and Click & Clean
nozzles
1. Push the spray lance (6) into
the spray gun (7) and screw
it on.
Note: The
spray lance (6)
has a built-in low
pressure nozzle that can be
used for flushing away dirt.
2. Attach the nozzle.
Warning: When
attaching the Click
& Clean nozzles,
the pawl on the
ꢃ
ꢄ
,
side of the spray
lance should come out again.
Note: The Tor-
®
nado PR noz-
zle and the foam
sprayer feature a swivel lock,
which must be positioned in the
hole in the Click & Clean spray
lance.
Press the pawl to detach the
Click & Clean nozzle.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Water connection
An ordinary 1/2" garden hose
IMPORTANT! Only use wa-
of min. 5 m and max. 25 m will ter without any impurities. If
be suitable.
there is a risk of running sands
in the inlet water (i.e. from your
own well), an additional filter
should be mounted.
1. Let the water run through the
water hose before connecting
it to the machine to prevent
sand and dirt from penetrat-
ing the machine.
Note: Check that the filter is
fitted in the water inlet pipe
and that it is not clogged up.
2. Connect the water hose to
the water supply by means
of the quick connector (inlet
water, max. pressure: 10 bar,
max. temperature: 50°C).
3. Turn on the water.
NOTE: Connection to the public
mains according to regulations.
4.4 Start and stop of the
machine (when con-
The machine must not be
operated while hanging on
the wall hook!
Always adjust the distance and
thus the pressure of the nozzle
to the surface, which is to be
cleaned.
nected to a water supply)
The spray lance is affected
by a thrust during operation
- therefore always hold it firmly
with both hands. IMPORTANT:
Point the nozzle at the
ground.
Do not cover the machine
during operation.
Note: If the ma-
chine is left or not
used for 5 min-
1. Check that the machine is in
upright position.
utes, it must be switched off on
the start/stop switch "O" (1):
NOTE: Do not place the
machine in high grass!
2. Release the trigger lock.
3. Activate the trigger of the
spray gun and let the water
run until all air has escaped
from the water hose.
1. Press the start/stop switch
"O".
2. Disconnect the electrical plug
from the socket.
3. Shut off the water supply and
activate the trigger to relieve
the machine of pressure.
4. Lock the spray gun.
4. Press the Start/stop switch
"I" (1).
5. Activate the trigger of the
spray gun.
When releasing the trigger of
the spray gun, the machine au-
tomatically stops. The machine
will start again when you re-ac-
tivate the spray gun.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4.5 Start the machine (when
connected to open con-
tainers (suction mode))
The washer can take in water
from a rain water tank as an
example. The hose for the wa-
ter supply must not be too long,
approx. 5 m.
1. Place the other end of the
water hose in the water tank.
Use an external filter if the
water contains impurities.
2. Press the start/stop switch
"I".
Make sure that the water tank
is not placed on a lower level
than the machine.
3. Activate the trigger of the
spray gun and let the water
run, until the air has escaped
from the water hose and the
pump.
4. Mount spray lance and
nozzle.
4.6 Pressure regulation on
The pressure can be regulated
on the TORNADO PR nozzle.
®
®
the TORNADO PR-
nozzle
High pressure
Low pressure
5 Fields of application and working
methods
5.1 General
Efficient high presure cleaning is achieved by following a few guide-
lines, combined with your own personal experience of specific
cleaning tasks. Accessories and detergents, when correctly cho-
sen, can increase the efficiency of your pressure washer. Here is
some basic information about cleaning.
5.1.1 Detergent and foam
Foam or detergent should be applied onto dry surfaces so that the
chemical product is in direct contact with the dirt. Detergents are
applied from bottom to top, for example on a car bodywork, in order
to avoid "super clean" areas, where the detergent collects in higher
concentration and streams downwards. Let the detergent work for
several minutes before rinsing but never let it dry on the surface be-
ing cleaned. Note: It is important that the detergents do not dry up.
Otherwise the surfac that has to be cleaned can be damaged.
5.1.2 Mechanical effect
In order to break down tough layers of dirt, additional mechanical
effect may be required. Special wash brushes offer this supplemen-
tary effect that cuts through dirt (especially by car washing).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Typical fields of application
Below you will find a description of a lot of cleaning tasks which can be solved by a pressure washer
from Nilfisk-ALTO in association with accessories and detergents.
Task
Accessories ‘Click Cleaning method
& Clean’
Car
Car nozzle,
1. Apply Car Combi Cleaner with the foam sprayer. Always
auto brush,
underchassis
nozzle,
Foam sprayer,
Car Combi Cleaner
start from the bottom and work upwards. Let Car Combi
Cleaner act for at least 5 min.
2. Wash the car with the car nozzle, which has been optimized for
quick and gentle cleaning of enamelled surfaces (the jet is wider
and not so sharp). Start at the front of the car and work back-
wards to avoid water from penetrating by the door mouldings.
3. Use the brush for removal of traffic film which is not removed by the
nozzle. If the car is very dirty, apply Car Combi Cleaner again.
4. Attach the undercarriage nozzle and clean undercarriage and
wheel arches.
5. Remove water from the surface of the car with the scraper
on the car brush. Make sure that all grains of sand etc. have
been removed before using the scraper. Wipe with a wash lea-
ther where the scraper cannot reach.
Rims, alu- Rim brush,
Apply Alu Cleaner with an automizer. Let it act for approx.
5 min. and wash with the rim brush. For steel rims, use Car Com-
bi Cleaner. Use the foam sprayer and wash with rim brush.
Be careful! The high pressure jet may damage the tyres.
minium
auto nozzle,
atomizer,
Alu Cleaner
Flagstones, Powerspeed®
concrete nozzle,
floors and Stone & Wood
other hard Cleaner,
Wash towards outlets or the like. On surfaces with moss or
algae you may start by applying Stone & Wood Cleaner with
the foam sprayer. Wash before the soap dries. Another
more effective and quicker method is to use the Patio
Cleaner. Thus you will also avoid splashes.
surfaces
Patio Cleaner
Garden
furniture,
wood
Wood Cleaner
Garden brush
Apply Wood Cleaner and wash before the soap dries.
NOTE: Use the garden brush to clean off the dirt.
Brickwork, Powerspeed®
Wood work nozzle,
Stone & Wood
Same method as for flagstones, but be careful - bad joints and
wood may be damaged by high pressure.You may choose only
to use the Tornado® nozzle. Adjust the distance (pressure) to
the quality of the joints and the wood. Patio Cleaner can also be
used on vertical surfaces.
Cleaner,
Patio Cleaner
Gutter
Underchassis spray Wash the gutter with the nozzle. Always wash towards
lance
downpipes. Beware not to spray under the roofing.
Cleaning
of drain
pipes, out-
lets, down
pipes etc.
Tube cleaner
Push the tube cleaner approx. ½ m (to mark) into a tube or drain
and activate the trigger of the spray handle. The nozzle opening
turning backwards will pull the cleaner through the tube. The
nozzle will break down the „plug“ and flush the dirt backwards.
Rust, paint Water/sandblasting Mount the water/sand blasting equipment and rust and paint
equipment
is efficiently and quickly removed. Beware not to damage the
surface to be sandblasted.
Green-
house
Tornado® PR nozzle Wash with high pressure and maybe a brush.You may use Stone
brush, Stone &
Wood Cleaner
& Wood Cleaner to remove moss and algae.
Garden
Tornado® PR noz-
Rinse the worst dirt off with the nozzle. Apply Metal Cleaner with
the foam sprayer and let it act for approx. 5 min. Wash with the
nozzle.You may use the multiangle adaptor for hard to get at
areas to avoid splashing.
tools, lawn zle, Powerspeed®
mover
nozzle, multiangle
adaptor, Metal
Cleaner
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6 After using your pressure washer
6.1 Storing the washer
The machine should be sto-
red in a frost-free room!
3. Stop the machine, unplug
and wind up hose and cable.
4. Place spray handle, nozzles
and other accessories in the
holders of the machine.
Pump, hose and accessories
should always be emptied of
water prior to storing as follows:
Should the machine by mistake
be frozen, it will be necessary
to check it for damage.
,
1. Stop the machine (press the
start/stop switch “O” (1) and
detach water hose and ac-
cessory.
2. Restart the machine and
activate the trigger. Let the
machine run until no more
water runs through the spray
gun.
NEVER START-UP A FROZEN
MACHINE.
Frost damages are not
covered by the guarantee!
6.2 Winding up of electric
cable and high pressure
hose
To avoid accidents, the electric
cable and the high pressure
hose should always be winded
carefully up.
1. Wind up the electric cable on
the appropriate hooks.
The high pressure washer
comes in two models: A) with
hook for storage of high pres-
sure hose (14) - B) with a hose
reel (13), where the hose is
pushed into the reel and after-
wards winded up.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Storage of accessories
The standard accessories
(spray gun and spray lance (a),
nozzles (b) foam sprayer (c))
can be stored on the pressure
washer.
A
D
B
C
E
The nozzle cleaning tool (d)
and a Click & Clean brush
(e) can also be stored on the
product.
6.4 Wall storage
The pressure washer can be
stored on a wall on a special
wall hook (not standard).
A
Only mount the wall hook on a
sturdy wall. Adjust the length
of the screws and size of rawl-
plugs to the type of wall.
B
C
On the wall hook garden/rim
brush (a) foam sprayer (b),
Click & Clean brush (c) and
Click & Clean nozzles (d) can
be stored.
D
Note: For this
product the wall
hook can only be
used as storage.
Important: The
bearing capacity
of the wall hook
is max. 30 kg.
,
7 Maintenance
WARNING! Always disconnect
z Wash out water hose, high
pressure hose, spray lance
and accessories before
mounting.
the electrical plug from the
socket prior to maintenance or
cleaning.
z Clean the connectors of dust
and sand.
To ensure a long and problem
free working life, please take
the following advice:
11
Download from Www.Somanuals.com. All Manuals Search And Download.
z Make sure that no sand or
dirt is blocking the movement
of the pawl on the Click &
Clean spray lance. Rinse ac-
cording to requirement.
z Rinse the detergent spraying
attachment after use.
z Clean the nozzles.
Any repair should always be
made in an authorized work-
shop with original spare parts.
7.1 Cleaning of water inlet
fi lter
Clean the water inlet filter
regularly once a month or more
frequently according to use.
Carefully loosen the filter with a
screwdriver and clean it. Check
that it is intact before re-mount-
ing it.
The inlet filter must always be
fitted inside the water inlet pipe
to filter out sand, limestone and
other impurities, as they will
damage the pump valves.
CAUTION: Failure to fit the filter
will invalidate the guarantee.
7.2 Cleaning of nozzle
A clogging up in the nozzle
causes a pump pressure which
is too high. This is why cleaning
is required immediately.
1. Stop the machine and dis-
connect the nozzle.
2. Clean the nozzle. IMPOR-
TANT: The cleaning tool (11)
should only be used when
the nozzle is detached!
3. Flush the nozzle backwards
with water.
7.3 Cleaning of machine
vents
The machine should be kept
clean so as to let cooling air
pass freely through the ma-
chine vents.
7.4 Greasing of couplings
To ensure an easy connec-
tion and that o-rings do not dry
up, the couplings should be
greased regularly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Trouble-shooting
To avoid unnecessary disappointments, you should check the following before contacting the Nilfisk-
ALTO service organization:
Symptom
Cause
Recommended action
Machine refuses to start Machine not plugged in
Defective socket
Plug in machine.
Try another socket.
Replace fuse. Switch off other machines.
Try without the extension cable.
Fuse has blown
Defective extension cable
Fluctuating pressure
Pump sucking air
Check that hoses and connections are air-
tight.
Valves dirty, worn out
or stuck
Pump seals worn out
Clean and replace or refer to local Nilfisk
ALTO distributor
Clean and replace or refer to local Nilfisk-
ALTO distributor.
Motor busses
Machine stops
Low voltage or
low temperature
Activate the trigger of the spray gun.
Fuse has blown
Incorrect mains voltage
Replace fuse. Switch off other machines.
Check that the mains voltage corresponds
to specification on the model tag.
Leave the washer for 5 minutes to cool
down.
Thermal sensor activated
Nozzle partially blocked
Fuse too small
Clean the nozzle (see section 7.2)
Fuse blows
Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating
Air in inlet hose/pump
Allow machine to run with open trigger until
regular working pressure resumes.
Check that the water supply corresponds to
specifications required (see model tag)
NB! Avoid using long, thin hoses (min. 1/2")
Clean the nozzle (see section 7.2)
Clean the filter (see section 7.1)
Inadequate supply of
mains water
Nozzle partially blocked
Water filter blocked
Hose kinked
Straighten out hose.
Machine often starts
and stops by itself
Pump/spray gun is
leaking
Contact your nearest Nilfisk-ALTO Service
Centre.
Machine starts, but
no water comes out
Pump/hoses or accessory Wait for pump/hoses or accessory to thaw.
frozen
No water supply
Water filter blocked
Nozzle blocked
Connect inlet water.
Clean the filter (see section 7.1)
Clean the nozzle (see section 7.2)
In case problems other than the above occur, please contact your local Nilfisk-ALTO distributor.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Further information
9.1 Recycling the washer
Make the old cleaner unusable
immediately.
As specified in European Direc-
tive 2002/96/EC on old electri-
cal and electronic appliances,
used electrical goods must
be collected separately and
recycled ecologically.
1. Unplug the cleaner and cut
the electric cable.
Do not discard electrical appli-
ances with household waste.
Contact your local authorities or
your nearest dealer for further
information.
9.2 Warranty conditions
Nilfisk-ALTO guarantees high
pressure washers for domestic
use for 2 years. If your high
Repairs under this guarantee
include replacement of defec-
tive parts, exclusive of packing
pressure washer or accessories and postage/carriage. Besides,
are handed in for repair, a copy we refer to your national law of
of the receipt must be enclosed. sale.
Guarantee repairs are being
made on the following condi-
tions:
The machine should be for-
warded to one of the service
centres of the Nilfisk-ALTO
organisation with description/
specifi cation of the fault.
z that defects are attributable
to flaws or defects in materi-
als or workmanship. (wear
and tear as well as misuse
are not covered by the guar-
antee).
Repairs not covered by the
guarantee conditions will be
invoiced. (I.e. malfunctions due
z that the directions of this
instruction manual have been to Causes mentioned in section
thoroughly observed.
z that repair has not been car-
ried out or attempted by oth-
er than Nilfisk-ALTO-trained
service staff.
Troubleshooting Chart of the
instruction manual).
In order that Nilfisk-ALTO
can render you optimum
service, you should register
your product on our web site
z that only original accessories
have been applied.
exposed to abuse such as
knocks, bumps or frost.
“PRODUCT REGISTRATION”.
z that only water without any
impurities has been used.
z that the high pressure wash-
er has not been used for
rental nor used commercially
in any other way.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3 Accessories
Only use original accessories.
Click & Clean
Car nozzle
Special nozzle for enameled surfaces. Optimal distance: 30
- 50 cm.
Click & Clean
Undershassis
nozzle
90° angled special nozzle for undercarriage and wheel arches.
Integrated guide shoes.
Click & Clean
Multiangle
adaptor
Adjusted in angles from 0° - 90° for better working posture and
cleaning of hard to get at places as for instance barrels or the
underside of the lawn mower. Fits all nozzles.
Click & Clean
Brushes
For cars and other surfaces. Available in more shapes.
Extension hose
7 m extension hose increasing the working range.
Special spray lance for washing your car underneath.
Underchassis
spray lance
Drain & Tube
cleaner
15 m long tube cleaner for the cleaning of tubes and drains.
Water-sand-
blasting equip-
ment
For removal of paint and rust. Sand available from do-it-your-
self shops.
Patio Cleaner
Equipment for quick cleaning of patio/drive/flagstones.
Garden brush
Rim brush
Wall hook
Rotary brush for cleaning of wooden surfaces.
Rotary brush for cleaning of wheel rims.
For suspension of your high pressure washer on the wall.
Rotary brush
For cleaning vehicles and other surfaces.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Detergents
Stone & Wood Cleaner
Plastic Cleaner
For flagstones, brick- and woodwork. Suitable for moss and algae.
For plastic and synthetic materials such as garden furniture.
For cleaning of metal such as garden tools.
Metal Cleaner
Car Combi Cleaner
Alu Cleaner
For cars etc. With rinsing wax.
For surfaces of aluminium. Applied with an atomizer.
Oil & Grease Cleaner
For cleaning of grease and oil on motors for instance. Applied with
an atomizer.
Wood Cleaner
For cleaning of wooden surfaces incl. of wooden garden furniture.
10 EU Declaration of Conformity
EU Declaration of Conformity
Product:
Type:
High Pressure Washer
Nilfisk-ALTO C 120.1-6 / C 120.1-10
230 V 1~, 50 Hz - IP X5
Description:
The design of the unit
corresponds to the following
pertinent regulations:
EC Machine Directive
EC Low-voltage Directive
EC EMV Directive
98/37/EC
73/23/EEC
2004/108/EEC
Applied harmonised standards: EN 60335-2-79
Applied national standards and IEC 60335-2-79
technical specifications:
Nilfisk-ALTO
Division of Nilfisk-Advance A/S
Industrivej 1
DK-9560 Hadsund
Anton Sørensen
V.P. Technical Operations Europe Hadsund, 01.11.2004
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
FRANCE
PORTUGAL
Nilfisk-ALTO
Nilfisk-ALTO
ALTO France SAS
Aéroparc 1
19 rue Icare
67960 Entzheim
Tel.: +33 3 88 28 84 00
Fax: +33 3 88 30 05 00
E-mail: info@nilfisk-alto.fr
Division of Nilfisk-Advance Lda.
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1° A
P2710-089 Sintra
Tel.: +35 808 200 537
Fax: +35 121 911 2679
E-mail: mkt@nilfisk-advance.es
GERMANY
RUSSIA
Nilfisk-ALTO
Nilfisk-Advance LLC
Vyatskaya str. 27, bld. 7
127015 Moskow
Division of Nilfisk-Advance AG
Guido-Oberdorfer-Strasse 10
89287 Bellenberg
Tel.: +49 0180 5 37 37 37
Fax: +49 0180 5 37 37 38
E-mail: info@nilfisk-alto.de
HEAD QUARTER
Tel.: +7 495 783 96 02
Fax: +7 495 783 96 03
E-mail: info@nilfisk-advance.ru
DENMARK
Nilfisk-Advance Group
Sognevej 25
SINGAPORE
DK-2605 Brøndby
Nilfisk-Advance Pte. Ltd.
Nilfisk-ALTO Division
40 Loyang Drive
Tel.: +45 4323 8100
Fax: +45 4343 7700
E-mail: mail@nilfisk-advance.dk
GREECE
Nilfisk-Advance SA
8, Thoukididou str.
Singapore 508961
164 52 Argiroupolis
Tel.: +30 210 96 33443
Fax: +30 210 96 52187
E-mail: nilfi[email protected]
Tel.: +65 6 759 9100
Fax: +65 6 759 9133
E-mail: sales@nilfisk-advance.com.sg
SALES COMPANIES
SPAIN
AUSTRALIA
Nilfisk-ALTO
48 Egerton St.
P.O. Box 6046
Silverwater, N.S.W. 2128
Tel.: +61 2 8748 5966
Fax: +61 2 8748 5960
HOLLAND
Nilfisk-ALTO
Nilfisk-ALTO
Division of Nilfisk-Advance S.A.
Torre D’Ara
Division of Nilfisk-Advance BV
Camerastraat 9
Paseo del Rengle, 5 Pl. 10
08302 Mataró
3322 BB Almere
Tel.: +31 36 546 07 60
Fax: +31 36 546 07 61
E-mail: info@nilfisk-alto.nl
Tel.: +3 4 902 200 201
Fax: +34 93 757 8020
E-mail: mkt@nilfisk-advance.es
AUSTRIA
Nilfisk-Advance GmbH
Nilfisk-ALTO
SWEDEN
HONG KONG
ALTO Sverige AB
Metzgerstrasse 68
5101 Bergheim/Salzburg
Tel.: +43 662 456 400-0
Fax: +43 662 456 400-34
E-mail: info@nilfisk-alto.at
Nilfisk-Advance Ltd.
2001 HK Worsted Mills Ind’l Bldg.
31-39 Wo Tong Tsui St.
Kwai Chung
Member of Nilfisk-Advance Group
Aminogatan 18, Box 4029
431 04 Mölndal
Tel.: +46 31 706 73 00
Fax: +46 31 706 @nilfisk-alto.se
Tel.: +852 2427 5951
Fax: +852 2487 5828
BELGIUM
HUNGARY
TAIWAN
Nilfisk-ALTO
Nilfisk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Tel: +36 2447 5550
Nilfisk-Advance Taiwan Branch
No. 5, Wan Fang Road
Taipei
Division of Nilfisk-Advance n.v-s.a.
Dornveld/Sphere Business Park
Industrie Asse 1 Zellik-Asse
Tel.: +32 02 467 60 50
Fax: +32 02 466 61 50
E-mail: info.be-@nilfisk-alto.com
Tel.: +886 227 002 268
Fax: +886 227 840 843
Fax: +36 2447 5551
E-mail: info@nilfisk-advance.hu
THAILAND
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Layao, Jatuchak, Bangkok 10900
Tel.: +66 2 275 5630
CANADA
ITALY
Clarke Canada
Nilfisk-ALTO
Part of the Nilfisk-Advance Group
4080 B Sladeview Crescent, Unit 1
Mississauga, Ontario L5L 5Y5
Tel.: +1 905 569 0266
Divisione di Nilfisk-Advance A/S
Località Novella Terza
26862 Guardamiglio (LO)
E-mail: d.puglia@nilfisk-advance.it
Fax: +66 2 691 4079
Fax: +1 905 569 8586
TURKEY
JAPAN
Nilfisk-Advance Profesional Temizlik
Ekipmanlari Tic. A/S.
Necla Cad. NI.: 48
CHINA
Nilfisk-Advance Inc.
247 Nippa-cho, Kouhoku-ku
Yokohama, 223-0057
Tel.: +8145 548 2571
Fax: +8145 548 2541
Nilfisk-Advance (Shenzhen) Ltd.
Blok 3, Unit 130 1001 Honghua Road
Int. Commercial & Trade Ce nter
Fuitian Free Trade Zone
518038 Shenzhen
Yenisahra / Kadiköy
Istanbul
Tel.: +90 216 470 08 - 60
Fax: +90 216 470 08 - 63
Tel.: +86 755 8359 7937
Fax: +86 755 8359 1063
MALAYSIA
Nillfisk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
UNITED KINGDOM
Nilfisk-ALTO
CZECH REPUBLIC
ALTO Ceská Republika s.r.o.
Zateckých 9
Division of Nilfisk-Advance Ltd.
Bowerbank Way
52200 Kuala Lumpur
Tel.: +60 3 603 6275 3120
Fax: +60 3 603 6274 6318
14000 Praha 4
Gilwilly Industrial Estate, Penrith
Cumbria CA11 9BQ
Tel.: +420 24 14 08 419
Fax: +420 24 14 08 439
E-mail: [email protected]
Tel.: +44 1 768 86 89 95
Fax: +44 1 768 86 47 13
E-mail: sales@nilfisk-alto.co.uk
NORWAY
Nilfisk-Advance AS
Bjørnerudveien 24
1266 Oslo
DENMARK
Nilfisk-ALTO
Division of Nilfisk-Advance A/S
Industrivej 1
Tel.: +47 22 75 17 70
Fax: +47 22 75 17 71
E-mail: info@nilfisk-alto.no
USA
ALTO Cleaning Systems Inc.
Part of the Nilfisk-Advance Group
12249 Nations Ford Rd.
Pineville, North Carolina 28134
Tel.: +1 704 971 1240
9560 Hadsund
Tel.: +45 7218 2100
Fax: +45 7218 2105
E-mail: salg@nilfisk-alto.dk
E-mail: service@nilfisk-alto.dk
POLAND
Nilfisk-Advance Sp. Z.O.O.
05-800 Pruszków
Fax: +1 704 971 1241
E-mail: info@nilfisk-advance.us
ul. 3-go MAJA 8
Nilfisk-ALTO Food division
Division of Nilfisk-Advance A/S
Blytækkervej 2
Tel.: +48 22 738 37 50
Fax: +48 22 738 37 51
E-mail: info@nilfisk-alto.pl
VIETNAM
Nilfisk-Advance Representative Office
No. 46 Doc Ngu Str.
Ba Dinh Dist.
9000 Aalborg
Tel.: +45 7218 2100
Hanoi
Fax: +45 7218 2099
Tel.: +84 4 761 5642
Fax: +84 4 761 5643
E-mail: nilfi[email protected]
E-mail: scanio.technology@nilfisk-alto.dk
126486032 (01.2007)
Download from Www.Somanuals.com. All Manuals Search And Download.
|