DIGITAL CAMERA
Reference Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Trademark Information
• Microsoft, Windows and Windows Vista are either registered trademarks or trademarks
of Microsoft Corporation in the United States and/or other countries.
• Macintosh, Mac OS, and QuickTime are trademarks of Apple Inc., registered in the U.S.
and other countries. The iFrame logo and the iFrame symbol are trademarks of Apple
Inc.
• Adobe and Acrobat are registered trademarks of Adobe Systems Inc.
• SDXC, SDHC and SD Logos are trademarks of SD-3C, LLC.
• PictBridge is a trademark.
• HDMI,
logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• All other trade names mentioned in this manual or the other documentation provided
with your Nikon product are trademarks or registered trademarks of their respective
holders.
AVC Patent Portfolio License
This product is licensed under the AVC Patent Portfolio License for the personal and non-
commercial use of a consumer to (i) encode video in compliance with the AVC standard
(“AVC video”) and/or (ii) decode AVC video that was encoded by a consumer engaged in
a personal and non-commercial activity and/or was obtained from a video provider
licensed to provide AVC video. No license is granted or shall be implied for any other use.
Additional information may be obtained from MPEG LA, L.L.C.
See http://www.mpegla.com
.
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Read This First
Thank you for purchasing the Nikon COOLPIX S6200 digital camera. Before using
yourself with the information provided in this manual. After reading, please keep
this manual handy and refer to it to enhance your enjoyment of your new camera.
Confirming the Package Contents
In the event that any items are missing, please contact the store where you
purchased the camera.
COOLPIX S6200
Digital Camera
Camera Strap
Rechargeable Li-ion Battery
EN-EL12 (with terminal
cover)
Charging AC Adapter
EH-69P*
USB Cable UC-E6
Audio Video Cable EG-CP16
ViewNX 2 Installer CD
Reference Manual CD
•
Warranty
* A plug adapter is included if the camera was purchased in a country or region that requires
a plug adapter. The shape of the plug adapter varies with the country or region of
purchase.
NOTE: A memory card is not included with the camera.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First
About This Manual
If you want to start using the camera right away, see “The Basics of Shooting and
To learn about the parts of the camera and basic operations, see “Parts of the
Other Information
• Symbols and Conventions
To make it easier to find the information you need, the following symbols and
conventions are used in this manual:
Icon
Description
This icon indicates cautions and information that should be read before
using the camera.
B
This icon indicates notes and information that should be read before using
the camera.
C
These icons indicate other pages containing relevant information;
E: “Reference Section”, F: “Technical Notes and Index.”
A/E/F
• SD and SDHC/SDXC memory cards are referred to as “memory cards” in this
manual.
• The setting at the time of purchase is referred to as the “default setting.”
• The names of menu items displayed in the camera monitor, and the names of
buttons or messages displayed on a computer monitor appear in bold.
• In this manual, images are sometimes omitted from monitor display samples so
that monitor indicators can be more clearly shown.
• Illustrations and monitor content shown in this manual may differ from the
actual product.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First
Information and Precautions
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education,
continually updated information is available online at the following sites:
• For users in the U.S.A.: http://www.nikonusa.com/
• For users in Europe and Africa: http://www.europe-nikon.com/support/
• For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently
asked questions (FAQs), and general advice on digital imaging and photography. Additional
information may be available from the Nikon representative in your area. Visit the site below for
contact information:
http://imaging.nikon.com/
Use Only Nikon Brand Electronic Accessories
Nikon COOLPIX cameras are designed to the highest standards and include complex electronic
circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, Charging AC
adapters, and AC adapters) certified by Nikon specifically for use with this Nikon digital camera are
engineered and proven to operate within the operational and safety requirements of this electronic
circuitry.
THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE THE CAMERA AND MAY
VOID YOUR NIKON WARRANTY.
The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal could
interfere with normal operation of the camera or result in the batteries overheating, igniting,
rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
Holographic seal: Identifies this
device as an authentic Nikon product.
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on
a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable
for damages or lost profits that may result from product malfunction.
About the Manuals
• No part of the manuals included with this product may be reproduced, transmitted, transcribed,
stored in a retrieval system, or translated into any language in any form, by any means, without
Nikon’s prior written permission.
• Nikon reserves the right to change the specifications of the hardware and software described in
these manuals at any time and without prior notice.
• Nikon will not be held liable for any damages resulting from the use of this product.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Read This First
• While every effort was made to ensure that the information in these manuals is accurate and
complete, we would appreciate it were you to bring any errors or omissions to the attention of the
Nikon representative in your area (address provided separately).
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that was digitally copied or reproduced by means
of a scanner, digital camera or other device may be punishable by law.
• Items prohibited by law from being copied or reproduced
Do not copy or reproduce paper money, coins, securities, government bonds or local government
bonds, even if such copies or reproductions are stamped “Sample.” The copying or reproduction of
paper money, coins, or securities which are circulated in a foreign country is prohibited. Unless the
prior permission of the government was obtained, the copying or reproduction of unused postage
stamps or post cards issued by the government is prohibited.
The copying or reproduction of stamps issued by the government and of certified documents
stipulated by law is prohibited.
• Cautions on certain copies and reproductions
The government has issued cautions on copies or reproductions of securities issued by private
companies (shares, bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except
when a minimum of necessary copies are to be provided for business use by a company. Also, do
not copy or reproduce passports issued by the government, licenses issued by public agencies and
private groups, ID cards and tickets, such as passes and meal coupons.
• Comply with copyright notices
The copying or reproduction of copyrighted creative works such as books, music, paintings,
woodcut prints, maps, drawings, movies, and photographs is governed by national and international
copyright laws. Do not use this product for the purpose of making illegal copies or to infringe
copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting data storage devices such as memory cards or
built-in camera memory does not completely erase the original image data. Deleted files can
sometimes be recovered from discarded storage devices using commercially available software,
potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is
the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data
using commercial deletion software, or format the device and then completely refill it with images
containing no private information (for example, pictures of empty sky). Be sure to also replace any
should be taken to avoid injury or damage to property when physically destroying data storage
devices.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
To prevent damage to your Nikon product or injury to yourself or to others, read
the following safety precautions in their entirety before using this equipment.
Keep these safety instructions where all those who use the product will read them.
This icon marks warnings, information that should be read before using this Nikon
product, to prevent possible injury.
WARNINGS
Turn off in the event of
malfunction
Do not use the camera or
Charging AC Adapter in the
presence of flammable gas
Should you notice smoke or an
unusual smell coming from the
camera or Charging AC Adapter,
unplug the Charging AC Adapter and
remove the battery immediately,
taking care to avoid burns. Continued
operation could result in injury. After
removing or disconnecting the power
source, take the equipment to a Nikon-
authorized service representative for
inspection.
Do not use electronic equipment in
the presence of flammable gas, as this
could result in explosion or fire.
Handle the camera strap with
care
Never place the strap around the neck
of an infant or child.
Keep out of reach of children
Particular care should be taken to
prevent infants from putting the
battery or other small parts into their
mouths.
Do not disassemble
Touching the internal parts of the
camera or Charging AC Adapter could
result in injury. Repairs should be
performed only by qualified
technicians. Should the camera or
Charging AC Adapter break open as
the result of a fall or other accident,
take the product to a Nikon-authorized
service representative for inspection,
after unplugging the product and/or
removing the battery.
Do not remain in contact with
the camera, battery charger,
or AC adapter for extended
periods while the devices are
on or in use
Parts of the devices become hot.
Leaving the devices in direct contact
with the skin for extended periods may
result in low-temperature burns.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
Observe caution when
handling the battery
The battery may leak, overheat, or
explode if improperly handled.
Observe the following precautions
when handling the battery for use in
this product:
• Before replacing the battery, turn
the product off. If you are using the
Charging AC Adapter/AC adapter,
be sure it is unplugged.
• If liquid from the damaged battery
comes in contact with clothing or
skin, rinse immediately with plenty
of water.
Observe the following
precautions when handling
the Charging AC Adapter
• Keep dry. Failure to observe this
precaution could result in fire or
electric shock.
• Dust on or near the metal parts of
the plug should be removed with a
dry cloth. Continued use could
result in fire.
• Do not handle the plug or go near
the Charging AC Adapter during
lightning storms. Failure to observe
this precaution could result in
electric shock.
• Do not damage, modify, forcibly tug
or bend the USB cable, place it under
heavy objects, or expose it to heat or
flames. Should the insulation be
damaged and the wires become
exposed, take it to a Nikon-authorized
service representative for inspection.
Failure to observe these precautions
could result in fire or electric shock.
• Do not handle the plug or Charging
AC Adapter with wet hands. Failure
to observe this precaution could
result in electric shock.
• Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters. Failure to observe
this precaution could damage the
product or cause overheating or fire.
• Use only a Rechargeable Li-ion
Battery EN-EL12 (included). Charge
the battery by using a camera that
supports battery charging or by
using a Battery Charger MH-65
(available separately). To charge the
battery with the camera, use either
Charging AC Adapter EH-69P
(included) or the Charge by
computer function.
• When inserting the battery, do not
attempt to insert it upside down or
backwards.
• Do not short or disassemble the
battery or attempt to remove or
break the battery insulation or casing.
• Do not expose the battery to flame
or to excessive heat.
• Do not immerse in or expose to water.
• Replace the terminal cover before
transporting it. Do not transport or
store with metal objects such as
necklaces or hairpins.
• The battery is prone to leakage when
fully discharged. To avoid damage to
the product, be sure to remove the
battery when no charge remains.
• Discontinue use immediately should
you notice any change in the battery,
such as discoloration or deformation.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
Use appropriate cables
Do not operate the flash with
the flash window touching a
person or object
When connecting cables to the input
and output jacks, use only the cables
provided or sold by Nikon for the
purpose, to maintain compliance with
product regulations.
Failure to observe this precaution
could result in burns or fire.
Avoid contact with liquid
crystal
Handle moving parts with
care
Be careful that your fingers or other
objects are not pinched by the lens
cover or other moving parts.
Should the monitor break, care should
be taken to avoid injury caused by
broken glass and to prevent liquid
crystal from the monitor touching the
skin or entering the eyes or mouth.
CD-ROMs
Turn the power off when
using inside an airplane or the
hospital
The CD-ROMs included with this
device should not be played back on
audio CD equipment. Playing CD-
ROMs on an audio CD player could
cause hearing loss or damage the
equipment.
Turn the power off while inside the
airplane during take off or landing.
Follow the instructions of the hospital
when using while in a hospital. The
electromagnetic waves given out by
this camera may disrupt the electronic
systems of the airplane or the
Observe caution when using
the flash
Using the flash close to your subject’s
eyes could cause temporary visual
impairment. Particular care should be
observed if photographing infants,
when the flash should be no less than
1 m (3 ft 4 in.) from the subject.
instruments of the hospital.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
equipment does cause harmful
interference to radio or television
reception, which can be determined
by turning the equipment off and on,
the user is encouraged to try to correct
the interference by one or more of the
following measures:
Notices for Customers in the
U.S.A.
IMPORTANT SAFETY
INSTRUCTIONS -
SAVE THESE INSTRUCTIONS.
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
DANGER - TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE
INSTRUCTIONS
For connection to a supply not in the
U.S.A., use an attachment plug adapter
of the proper configuration for the
power outlet if needed.
The power supply unit is intended to
be correctly orientated in a vertical or
floor mount position.
• Connect the equipment into an
outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an
experienced radio/television
technician for help.
Federal Communications
Commission (FCC) Radio
Frequency Interference
Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable
CAUTIONS
Modifications
The FCC requires the user to be
notified that any changes or
modifications made to this device that
are not expressly approved by Nikon
Corporation may void the user’s
authority to operate the equipment.
protection against harmful
interference in a residential installation.
This equipment generates, uses, and
can radiate radio frequency energy
and, if not installed and used in
Interface Cables
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not
occur in a particular installation. If this
Use the interface cables sold or
provided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Notice for customers in the State of
California
WARNING
Handling the cord on this product will
expose you to lead, a chemical known
to the State of California to cause birth
defects or other reproductive harm.
Wash hands after handling.
Notices for customers in Europe
CAUTIONS
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSE OF USED BATTERIES
ACCORDING TO THE
INSTRUCTIONS.
Nikon Inc.,
1300 Walt Whitman Road
Melville, New York 11747-3064
USA
This symbol indicates that
this product is to be
collected separately.
Tel: 631-547-4200
The following apply only to
users in European countries:
• This product is designated for
separate collection at an
Notice for customers in Canada
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
CAUTION
This Class B digital apparatus complies
with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
• All batteries, whether marked with
this symbol or not, are designated
for separate collection at an
appropriate collection point. Do not
dispose of as household waste.
• For more information, contact the
retailer or the local authorities in
charge of waste management.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Read This First ........................................................................................................................................ ii
Information and Precautions........................................................................................................................ iv
For Your Safety...................................................................................................................................... vi
WARNINGS............................................................................................................................................................... vi
Notices ..................................................................................................................................................... ix
Parts of the Camera and Basic Operations................................................................................. 1
Parts of the Camera.............................................................................................................................. 2
The Camera Body ................................................................................................................................................. 2
Controls Used in Shooting Mode............................................................................................................... 4
Controls Used in Playback Mode................................................................................................................ 5
The Monitor.............................................................................................................................................................. 6
Basic Operations.................................................................................................................................... 8
Switching Between Shooting Mode and Playback Mode .......................................................... 8
Using the Rotary Multi Selector................................................................................................................... 9
Using Menus (the d Button)................................................................................................................. 10
Attaching the Camera Strap........................................................................................................................ 12
The Basics of Shooting and Playback........................................................................................ 13
Preparation 3 Insert a Memory Card............................................................................................ 18
Internal Memory and Memory Cards..................................................................................................... 19
Approved Memory Cards.............................................................................................................................. 19
Step 1 Turn the Camera On............................................................................................................. 20
Step 4 Focus and Shoot.................................................................................................................... 28
Shooting Features............................................................................................................................ 35
A (Auto) Mode ................................................................................................................................... 36
Changing A (Auto) Mode Settings ....................................................................................................... 36
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Scene Mode (Shooting Suited to Scenes).................................................................................. 39
Special Effects Mode (Applying Effects When Shooting)..................................................... 47
Changing Smart Portrait Mode Settings.............................................................................................. 50
Changing the Image Size (Image Mode).................................................................................... 63
Playback Features............................................................................................................................. 71
Selecting Certain Types of Images for Playback...................................................................... 72
Retouching Photographs.............................................................................................................................. 79
Editing Movies...................................................................................................................................................... 79
Recording and Playing Back Movies.......................................................................................... 81
General Camera Setup.................................................................................................................... 87
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Reference Section ....................................................................................................................... E1
Using Panorama Assist................................................................................................................. E2
Favorite Pictures Mode................................................................................................................ E4
Adding Images to Albums...................................................................................................................... E4
Playing Back Images in Albums........................................................................................................... E5
Removing Images from Albums ......................................................................................................... E5
Changing the Favorites Album Icon................................................................................................. E6
Auto Sort Mode .............................................................................................................................. E7
Auto Sort Mode Categories.................................................................................................................... E7
List by Date Mode.......................................................................................................................... E9
Editing Still Images..................................................................................................................... E10
Editing Features.......................................................................................................................................... E10
k Quick Retouch: Enhancing Contrast and Saturation.................................................. E12
I D-Lighting: Enhancing Brightness and Contrast........................................................... E13
e Skin Softening: Softening Skin Tones................................................................................... E14
Filter Effects: Applying Digital Filter Effects....................................................................... E16
g Small Picture: Reducing the Size of an Image................................................................. E18
Crop: Creating a Cropped Copy .............................................................................................. E19
Connecting the Camera to a TV (Viewing Images on a TV) ......................................... E21
Connecting the Camera to a Printer (Direct Print).......................................................... E23
Connecting the Camera to a Printer.............................................................................................. E24
Printing Individual Images................................................................................................................... E26
Printing Multiple Images....................................................................................................................... E27
The Shooting Menu (for A (Auto) Mode) ......................................................................... E30
White Balance (Adjusting Hue)......................................................................................................... E30
Continuous Shooting.............................................................................................................................. E32
ISO Sensitivity............................................................................................................................................... E33
Color Options............................................................................................................................................... E34
AF Area Mode .............................................................................................................................................. E35
Autofocus Mode......................................................................................................................................... E37
The Smart Portrait Menu.......................................................................................................... E38
Skin Softening.............................................................................................................................................. E38
Smile Timer.................................................................................................................................................... E38
Blink Proof....................................................................................................................................................... E39
The Subject Tracking Menu..................................................................................................... E40
Autofocus Mode......................................................................................................................................... E40
Face Priority Tracking .............................................................................................................................. E40
The Playback Menu .................................................................................................................... E41
a Print Order (Creating a DPOF Print Order)......................................................................... E41
b Slide Show............................................................................................................................................. E45
d Protect...................................................................................................................................................... E46
f Rotate Image........................................................................................................................................ E48
Voice Memo ......................................................................................................................................... E49
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
The Movie Menu.......................................................................................................................... E52
Movie Options............................................................................................................................................. E52
Autofocus Mode......................................................................................................................................... E53
Wind Noise Reduction............................................................................................................................ E53
The Setup Menu .......................................................................................................................... E54
Welcome Screen........................................................................................................................................ E54
Time Zone and Date................................................................................................................................ E55
Monitor Settings......................................................................................................................................... E58
Print Date (Imprinting Date and Time)......................................................................................... E60
Vibration Reduction ................................................................................................................................. E61
Motion Detection...................................................................................................................................... E62
AF Assist........................................................................................................................................................... E63
Digital Zoom................................................................................................................................................. E63
Sound Settings............................................................................................................................................ E64
Auto Off ........................................................................................................................................................... E65
Format Memory/Format Card ........................................................................................................... E66
Language........................................................................................................................................................ E67
TV Settings ..................................................................................................................................................... E68
Charge by Computer............................................................................................................................... E69
Blink Warning............................................................................................................................................... E71
Filmstrip........................................................................................................................................................... E73
Reset All ........................................................................................................................................................... E74
Firmware Version....................................................................................................................................... E76
File and Folder Names............................................................................................................... E77
Optional Accessories ................................................................................................................. E78
Error Messages............................................................................................................................. E79
Technical Notes and Index......................................................................................................... F1
Caring for the Product................................................................................................................... F2
The Camera ....................................................................................................................................................... F2
The Battery......................................................................................................................................................... F4
Charging AC Adapter.................................................................................................................................. F5
Memory Cards ................................................................................................................................................. F5
Cleaning and Storage.................................................................................................................... F6
Cleaning .............................................................................................................................................................. F6
Storage................................................................................................................................................................. F6
Troubleshooting.............................................................................................................................. F7
Specifications ................................................................................................................................. F14
Supported Standards................................................................................................................................ F18
Index.................................................................................................................................................. F19
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera and
Basic Operations
This chapter describes the parts of the camera and also explains how to use basic
camera features.
The Camera Body ..........................................................................................2
The Monitor.....................................................................................................6
If you want to start using the camera right away, see “The Basics of
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera and Basic Operations
Parts of the Camera
The Camera Body
1
2 3
4
5
6
7
11
10
9
8
Lens cover closed
1
Shutter-release button....................4, 5, 28
5
6
7
8
9
Microphone (stereo)...........................73, 82
Flash......................................................................56
Lens
Zoom control........................................4, 5, 27
2
Lens cover
Eyelet for camera strap..............................12
3
4
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
1
2
17
16
3
4
5
6
7
8
9
10
15
14 13
12 11
Battery-chamber/
memory card slot cover....................14, 15
1
2
3
4
5
10
A (shooting mode) button
..................................................................4, 5, 8, 24
USB/audio/video output connector
14
Rotary multi selector
..........................................................................16, 74
6
7
8
9
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
Controls Used in Shooting Mode
Control
Name
Main Function
A
Shooting
Changes the shooting mode (displays the
mode button shooting-mode selection screen).
Zooms in and out; rotate to g (i) to zoom
in and make the subject larger, and rotate
to f (h) to zoom out and view a wider
Zoom control
area.
selector
more information.
10,
37,
85,
d button Displays and hides the menu.
When pressed halfway (i.e., if you stop
pressing when you feel resistance): Sets
focus and exposure.
When pressed all the way: Releases the
shutter.
Shutter-
release button
Movie-record
Starts and stops movie recording.
button
Playback
30,
72,
Plays back images.
button
Delete button Deletes the last image that was saved.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
Controls Used in Playback Mode
Control
Name
Main Function
A
•
•
Changes the playback mode (displays
the playback-mode selection screen).
change to playback mode.
Playback
button
•
•
•
When rotated to g (i): Magnifies the
image.
When rotated to f (h): Displays
thumbnails or the calendar.
voice memos and movies.
Zoom control
selector
more information.
•
Switches from image thumbnail or
zoomed image display to full-frame
display.
Adds images to albums, removes
images from albums.
Apply
selection
button
•
•
Plays back movies.
d button Displays and hides the menu.
Delete button Deletes images.
–
Shooting
mode button
Shutter-
release button
–
–
Returns to shooting.
Movie-record
button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
The Monitor
• The information that is displayed in the monitor during shooting and playback
changes depending on the camera’s settings and state of use.
By default, information is displayed when the camera is first turned on and
when you operate the camera, and turns off after a few seconds (when
Shooting Mode
2
4
5
6
9
34
33
7
8
1
3
10
2
32
31
10
10
11
12
30
29
13
14
28
27
2 9 m 0 s
9 9 9
15
17
26
+1.0
1 6 0 0
16
1 / 2 5 0
F 3.2
25
20 19 18
9 9 9
9 9 9 9
24 23 22 21
1
2
3
4
5
6
7
8
9
Zoom indicator...................................... 27, 59
Focus area (face detection,
23
Focus area
(subject tracking mode) ...................37, 51
24
Number of exposures remaining
17
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts of the Camera
Playback Mode
4
5
6
1
2
3
1 5 / 1 1 / 2 0 1 1 1 2 : 0 0
9 9 9 9 . J P G
7
23
8
22
21
20
19
18
9
10
17
9 9 9 / 9 9 9
11
13
12
9 9 9 / 9 9 9
1 m 0 s
1 m 0 s
b
9 9 9 9 // 9 9 9 9
16
15
14
a
1
2
3
Movie playback indicator ........................86
14 Voice memo playback guide
Album icon in favorite pictures mode
4
5
Voice memo recording guide
15
Category icon in auto sort mode
6
7
8
9
(a) Current image number/
12
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Switching Between Shooting Mode and Playback Mode
The camera has two modes of operation: Shooting mode, which is used for taking
pictures, and playback mode, which is used for viewing pictures.
To switch to playback mode, press the c (playback) button.
To switch to shooting mode, press the A (shooting mode) button.
• While using playback mode, you can also switch to shooting mode by pressing
the shutter-release button or the b (e movie-record) button.
Shooting mode
Playback mode
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
2 9 m 0 s
7 6 0
4 /
4
Auto mode
Play
Shooting-mode selection
menu
Playback-mode selection
menu
• If you press the A (shooting mode) button while using shooting mode, the
shooting-mode selection menu is displayed, from which you can select one of
• If you press the c (playback) button while using playback mode, the playback-
mode selection menu is displayed, from which you can select one of the
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Using the Rotary Multi Selector
Rotate the rotary multi selector, press its upper (H), lower (I), left (J), or right
side (K), or press the k button.
•
The rotary multi selector is sometimes referred to as “the multi selector” in this manual.
In Shooting Mode
Rotate to select an item.*
Displays the m (flash
Displays the o
(exposure
compensation) guide
Displays the n (self-
Auto
Applies the current
selection.
* Items can also be selected by pressing the rotary multi selector up or down.
In Playback Mode
Selects the
previous image,
moves the
Adds image to album
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
from album (
72), plays
2
displayed area
when the image
is magnified
back movies (A
86).
4 /
4
Selects the next
image, moves the
displayed area
1
when the image is
1
magnified (A
31).
1
2
Previous or subsequent images can also be selected by rotating the rotary multi selector.
When displaying image thumbnails or when the image is magnified, this button switches
the camera to full-frame display.
When Displaying Menus
Selects the item
above.*
Selects the item to
the right, continues
to the next screen
(current selection is
applied).
Selects the item to
the left, returns to
the previous screen.
Panorama assist
Shooting menu
Image mode
Applies the current
selection (next
screen is displayed).
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
Selects the item below.*
* Items can also be selected by rotating the rotary multi selector.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Using Menus (the d Button)
If you press the d button while the shooting screen or playback screen is
displayed, the menu for the current mode is displayed. Once the menu is
displayed, you can change various settings.
Shooting mode
Playback mode
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
2 9 m 0 s
7 6 0
4 /
4
Shooting menu
Playback menu
Image mode
Quick retouch
Tabs
Tabs
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
A tab:
c tab:
Displays the settings that can be
changed for the current shooting mode
shooting mode, the tab icon that is
displayed will be different.
Displays the settings that can be
changed for the current playback mode
playback mode, the tab icon that is
displayed will be different.
D tab:
z
tab:
Displays movie recording settings.
tab:
Displays the setup menu, where you can
change a number of general settings.
z
Displays the setup menu, where you can
change a number of general settings.
C If Tabs Are Not Displayed
If you press the d button and the screen that allows you to
change the image mode is displayed, press the rotary multi selector
J to display the tabs.
Image mode
4608×3456
4608×3456
4000×3000
3264×2448
2592×1944
2048×1536
1024×768
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Switching Between Tabs
Shooting menu
Set up
Welcome screen
Shooting menu
Image mode
Image mode
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
Time zone and date
Monitor settings
Print date
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
Vibration reduction
Motion detection
AF assist
Press the rotary multi
selector J to highlight
the tab.
Press the rotary multi
selector H or I to select a
tab, and press either the k
button or K.
The selected menu is
displayed.
Selecting Menu Items
Shooting menu
Autofocus mode
Image mode
Single AF
Full-time AF
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
Press the rotary multi
Press H or I to select an
item and then press the
k button.
When you are finished
changing settings,
press the d button
to exit the menu.
selector H or I to select an
item, and then press K or
the k button.
Items can also be selected
by rotating the rotary multi
selector.
C When the Menu Contains Two or More Pages
A guide indicating the page position is displayed.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
11
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics of Shooting and
Playback
Preparation
Preparation 1 Insert the Battery .....................................................................................14
Preparation 2 Charge the Battery ..................................................................................16
Preparation 3 Insert a Memory Card.............................................................................18
Shooting
Step 1 Turn the Camera On..............................................................................................20
Step 2 Select a Shooting Mode.......................................................................................24
Step 3 Frame a Picture .......................................................................................................26
Step 4 Focus and Shoot.....................................................................................................28
Playback
Step 5 Play Back Images ....................................................................................................30
Step 6 Delete Unwanted Images ...................................................................................32
13
Download from Www.Somanuals.com. All Manuals Search And Download.
The Basics of Shooting and Playback
Preparation 1 Insert the Battery
1
Open the battery-chamber/memory card slot
cover.
2
Insert the included EN-EL12 battery
(rechargeable Li-ion battery).
Battery latch
•
Use the battery to push the orange battery
latch in the direction indicated by the
arrow (1), and fully insert the battery (2).
•
When the battery is inserted correctly, the
battery latch will lock the battery in place.
B Inserting the Battery Correctly
Inserting the battery upside down or backwards could damage the camera. Be sure
to check that the battery is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
•
Charge the battery before the first use or when the
battery is running low. See “Preparation 2 Charge the
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation 1 Insert the Battery
Removing the Battery
Turn the camera off and be sure that the power-on lamp
and the monitor have turned off before opening the
battery-chamber/memory card slot cover.
To eject the battery, open the battery-chamber/memory
card slot cover and slide the orange battery latch up in
the direction indicated by the arrow (1). The battery can
then be removed by hand (2). Do not pull it at an angle.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
B Notes About the Battery
Be sure to read and follow the warnings for the battery on page vii and in “The Battery” (F4) before
use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation 2 Charge the Battery
1
Prepare the included Charging AC Adapter EH-69P.
If a plug adapter* is included with your camera, attach the plug
adapter to the plug on the Charging AC Adapter. Push the plug
adapter firmly until it is securely held in place. Once the two are
connected, attempting to forcibly remove the plug adapter could
damage the product.
* The shape of the plug adapter varies according to the country or
region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter attached
in Argentina, Brazil, and Korea.
2
Make sure the battery is installed in the camera, and then connect the
camera to the Charging AC Adapter in order of 1 to 3.
•
Keep the camera turned off.
•
When connecting the cable, be sure that the camera connector is properly oriented.
Do not use force when connecting the cable to the camera. When disconnecting the
cable, do not pull the connector at an angle.
Charge lamp
Electrical outlet
USB Cable UC-E6 (included)
•
•
•
•
The charge lamp slowly blinks green to indicate that the battery is charging.
About 3 hours and 20 minutes are required to charge a fully exhausted battery.
When the battery has been completely charged, the charge lamp turns off.
3
Disconnect the Charging AC Adapter from the electrical outlet and
then disconnect the USB cable.
•
When the camera is connected to an electrical outlet with the Charging AC Adapter,
the camera cannot be turned on.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation 2 Charge the Battery
The Charge Lamp
Status
Description
Blinks slowly (green) The battery is charging.
The battery is not charging. When charging is complete, the charge
lamp stops blinking green and turns off.
Off
•
The ambient temperature is not suited to charging. Charge the
battery indoors with an ambient temperature of 5 °C to 35 °C
(41 °F to 95 °F).
Flickers (green)
•
The USB cable or Charging AC Adapter is not properly connected,
or there is a problem with the battery. Disconnect the USB cable
or unplug the Charging AC Adapter and correctly connect it
again, or change the battery.
B Notes About the Charging AC Adapter
C Charging Using a Computer or Battery Charger
• You can also charge the Rechargeable Li-ion Battery EN-EL12 by connecting the camera to a
without using the camera.
C Notes About an AC Power Source
from an electrical outlet for taking pictures and playing back images.
• Do not, under any circumstances, use another make or model of AC adapter other than the EH-62F.
Failure to observe this precaution could result in overheating or in damage to the camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Preparation 3 Insert a Memory Card
1
Be sure that the power-on lamp and the
monitor are off and open the battery-
chamber/memory card slot cover.
•
Be sure to turn off the camera before opening the
cover.
2
Insert the memory card.
Memory card slot
•
Slide the memory card in until it clicks into
place.
B Inserting the Memory Card
Inserting the memory card upside down or
backwards could damage the camera and the
memory card. Be sure to check that the memory
card is in the correct orientation.
3
Close the battery-chamber/memory card slot
cover.
B Formatting Memory Cards
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
• All data stored on a memory card is permanently deleted when the card is formatted.
If there is data saved on the memory card that you wish to keep, copy that data to a computer
before formatting.
• To format a memory card, insert the card into the camera, press the d button, and select
B Notes About Memory Cards
information.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation 3 Insert a Memory Card
Removing Memory Cards
Turn the camera off and be sure that the power-on lamp
and the monitor have turned off before opening the
battery-chamber/memory card slot cover.
Gently push the memory card into the camera (1) to
partially eject the card, and then remove the card (2). Do
not pull it at an angle.
B High Temperature Caution
The camera, battery, and memory card may be hot immediately after using the camera. Observe
caution when removing the battery or memory card.
Internal Memory and Memory Cards
Camera data, including images and movies, can be saved in either the camera’s
internal memory (approximately 74 MB) or on a memory card. To use the camera’s
internal memory for shooting or playback, first remove the memory card.
Approved Memory Cards
The following Secure Digital (SD) memory cards have been tested and approved
for use in this camera.
• Memory cards with an SD Speed Class rating of 6 or faster are recommended for
recording movies. When using a memory card with a lower Speed Class rating,
movie recording may stop unexpectedly.
SD memory
SDXC memory
2
SDHC memory card
3
card
card
1
SanDisk
TOSHIBA
Panasonic
Lexar
2 GB
4 GB, 8 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
64 GB
64 GB
48 GB, 64 GB
–
1
2 GB
2 GB
–
1
4 GB, 8 GB, 12 GB, 16 GB, 32 GB
4 GB, 8 GB, 16 GB, 32 GB
1
2
If the memory card will be used with a card reader or similar device, make sure that the
device supports 2 GB cards.
SDHC compliant.
If the memory card will be used with a card reader or similar device, make sure
that the device supports SDHC.
SDXC compliant.
3
If the memory card will be used with a card reader or similar device, make sure
that the device supports SDXC.
•
Contact the manufacturer for details on the above cards. We cannot guarantee camera
performance when using memory cards made by other manufacturers.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 Turn the Camera On
1
Press the power switch to turn on the camera.
•
If you are turning the camera on for the first time
•
The lens extends and the monitor turns on.
2
Check the battery level indicator and the number of exposures
remaining.
Battery level indicator
2 9 m 0 s
7 6 0
Number of exposures
remaining
Battery level indicator
Display
Description
b
B
N
The battery level is high.
The battery level is low. Prepare to charge or replace the
battery.
The camera cannot take pictures. Recharge or replace with a
fully charged battery.
Battery exhausted.
Number of Exposures Remaining
The number of pictures that can be taken is displayed.
• C is displayed when no memory card is inserted in the camera, and images will be
saved in the internal memory (approx. 74 MB).
•
•
The number of exposures remaining depends on the amount of available memory in
the internal memory or memory card, and also varies depending on the image quality
The number of remaining exposures shown in the illustrations in this manual is for
example purposes only.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 Turn the Camera On
Turning the Camera On and Off
• When the camera is turned on, the power-on lamp (green) will light and then
the monitor will turn on (the power-on lamp turns off when the monitor turns
on).
• To turn off the camera, press the power switch. When the camera turns off, the
power-on lamp and the display turn off.
• To turn on the camera and switch to playback mode, press and hold the c
(playback) button. The lens will not extend.
C Power Saving Function (Auto Off)
If no operations are performed for a while, the monitor will turn off, the camera will enter standby
mode, and the power-on lamp will blink. If no operations are performed for another three minutes,
the camera will turn off automatically.
While the camera is in standby mode, the monitor turns back on if you perform any of the following
operations:
➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback)
button, or b (e movie-record) button
Blinks
No operations
performed
No operations
performed
2
9
m
0
0
s
3 min
7
6
Camera enters
standby mode.
Camera turns off.
• The time that elapses before the camera enters standby mode can be changed using the Auto off
• By default, the camera enters standby mode in about one minute when you are using shooting
mode or playback mode.
• If you are using the optional AC Adapter EH-62F, the camera enters standby mode after 30 minutes.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 Turn the Camera On
Setting the Display Language, Date, and Time
When the camera is turned on for the first time, the language-selection screen and
the date and time setting screen for the camera clock are displayed.
1
2
3
4
5
Press the multi selector H or I
to select the desired language
and press the k button.
Language
Multi selector
Cancel
Press H or I to select Yes and press the k
button.
Time zone and date
Choose time zone and
set date and time?
•
To cancel without changing the setting, select No.
Yes
No
Cancel
Press J or K to select your home
time zone and press the k
button.
L o n d o n
C a s a b l a n c a
•
information about daylight saving time.
Back
Press H or I to select the date format and
press the k button or K.
Date format
Year/Month/Day
Month/Day/Year
Day/Month/Year
Press H, I, J, or K to set the date and time,
and press the k button.
Date and time
D
M
Y
•
•
•
•
Select an item: Press K or J (changes between D, M,
Y, hour, and minute).
Edit the highlighted item: Rotate the multi selector, or
press H or I.
Apply the setting: Select the minute setting and press
the k button or K.
0 1
0 1
2 0 1 1
0 0
0 0
Edit
When settings are finished, the lens extends and the camera switches to shooting mode.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1 Turn the Camera On
Daylight Saving Time
If daylight saving time is in effect, press the multi
selector H to enable the daylight saving time function
while setting the region in step 3. When the daylight
saving time function is enabled, W is displayed at the
top of the monitor.
L o n d o n
C a s a b l a n c a
Back
Press I to disable the daylight saving time function.
C Changing the Language Setting and the Date and Time Setting
• You can change these settings using the Language and Time zone and date settings in the
• You can enable and disable daylight saving time by selecting Time zone and date and then
Time zone in the z setup menu. When enabled, the clock moves forward one hour; when
disabled, the clock moves back one hour. When the travel destination (x) is selected, the time
difference between the travel destination and the home time zone (w) is automatically calculated
and the date and time in the selected region are saved at the time of shooting.
• If you exit without setting the date and time, O will blink when the shooting screen is displayed.
C The Clock Battery
• The camera’s clock is powered by a backup battery that is separate from the camera’s main
battery.
• The backup battery charges when the main battery is inserted into the camera or when the
camera is connected to an optional AC adapter, and can provide several days of backup power
after about ten hours of charging.
• If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed
when the camera is turned on. Set the date and time again. See “Setting the Display Language,
C Imprinting the Shooting Date in Printed Images
• Set the date and time before shooting.
• You can permanently imprint the shooting date in images as they are captured by setting Print
• If you want the shooting date to be printed without using the Print date setting, print using the
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Select a Shooting Mode
1
Press the A button.
•
The shooting-mode selection menu which
allows you to select the desired shooting
mode, is displayed.
2
Press the multi selector H or I
to select a shooting mode.
Auto mode
• A (auto) mode is used in this example.
Select A Auto mode.
Multi selector
3
Press the k button.
•
•
•
The camera switches to A (auto) mode and the A
icon is displayed.
information about the shooting mode screen.
The shooting mode setting is saved when the camera
is turned off.
2 9 m 0 s
7 6 0
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 Select a Shooting Mode
Available Shooting Modes
A
Auto mode
to suit the shooting conditions and the type of shot you want to capture.
x
Scene mode
Camera settings are optimized according to the scene that you select. When using
scene auto selector, the camera automatically selects the optimum scene mode
when you frame a picture, making it even easier to take pictures using settings that
suit the scene.
•
To select a scene, first display the shooting-mode selection menu and then press
the multi selector K. Select the desired scene by pressing H, I, J, or K, and
then press the k button.
D
Special effects
Effects can be applied to images during shooting. Six different effects are available.
•
To select an effect, first display the shooting mode menu and then press the
multi selector K. Select the desired effect by pressing H, I, J, or K, and then
press the k button.
F
s
Smart portrait
When the camera detects a smiling face, you can take a picture automatically
without pressing the shutter-release button (smile timer). You can also use the skin
softening option to smooth the skin tones in human faces.
Subject tracking
Ideal for focusing on moving subjects.
C Features That Are Available in Shooting Mode
• The multi selector H (X), I (p), J (n), and K (o) can be used to set the corresponding
shooting mode.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Frame a Picture
1
Hold the camera steady.
•
Keep fingers, hair, the camera strap, and other objects
away from the lens, flash, AF assist-illuminator,
microphone, and speaker.
•
When taking pictures in portrait (“tall”) orientation, turn
the camera so that the flash is above the lens.
2
Frame the picture.
•
When the camera detects a human face, that face is
framed by a yellow double border (focus area) (default
setting).
2 9 m 0 s
7 6 0
•
Up to 12 faces can be detected. When the camera
detects more than one face, the face closest to the
camera is framed by a double border and the others by
single borders.
•
When shooting non-human subjects or when no faces are detected, the focus area is
not displayed. Position the main subject near the center of the frame.
C When Using a Tripod
• We recommend using a tripod to stabilize the camera in the following situations.
- When zooming in on the subject
camera during shooting.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 Frame a Picture
Using the Zoom
Use the zoom control to activate optical zoom.
Zoom out
Zoom in
• To zoom in closer to the subject, rotate the zoom
control to g (telephoto).
• To zoom out and view a larger area, rotate the zoom
control to f (wide-angle).
When you turn the camera on, the zoom moves to
the maximum wide-angle position.
• A zoom indicator is displayed at the top of the
monitor when the zoom control is rotated.
Optical Digital
zoom zoom
Digital Zoom
When the camera is zoomed in to the maximum optical zoom position, rotating
and holding the zoom control at g triggers digital zoom.
Digital zoom can magnify the subject up to about 4× beyond the maximum
magnification of the optical zoom.
Maximum optical zoom
Digital zoom enabled
• When you are using digital zoom, the camera focuses on the subject in the
center of the frame and the focus area is not displayed.
C Digital Zoom and Interpolation
Unlike optical zoom, digital zoom uses a digital imaging process known as interpolation to magnify
digital zoom magnification.
Interpolation is applied at zoom positions beyond V when taking still images.
When zoom is increased beyond the V position, interpolation is initiated and the zoom indicator
turns yellow to indicate that interpolation is being applied.
The position of V moves to the right as image size decreases, allowing you to confirm the zoom
position at which shooting without interpolation is possible at the current image mode setting.
Small image size
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 Focus and Shoot
1
Press the shutter-release button halfway,
i.e., press the button slightly until you feel
resistance.
•
When you press the shutter-release button
halfway, the camera sets the focus and exposure
(shutter speed and aperture value). Focus and
exposure remain locked while the shutter-release
button is pressed halfway.
•
When a face is detected:
The camera focuses on the face framed by the double
border. When the subject is in focus, the double border
glows green.
1 / 2 5 0
F 3.2
Shutter
speed
Aperture
value
•
When a face is not detected:
The camera has nine focus areas, and automatically
selects the focus areas containing the subject closest
to the camera. When the subject is in focus, the focus
areas that are in focus (up to nine areas) glow green.
1 / 2 5 0
F 3.2
Shutter
speed
Aperture
value
•
•
When you are using digital zoom, the camera focuses on the subject in the center of
the frame and the focus area is not displayed. When the camera has focused, the
While the shutter-release button is pressed halfway, the focus area or focus indicator
may blink red. This indicates that the camera is unable to focus. Modify the
composition and press the shutter-release button halfway again.
2
Press the shutter-release button the rest of
the way down.
•
The shutter is released and the image will be saved to
the memory card or internal memory.
•
If you press the shutter-release button with too much
force, the camera may shake, causing images to be
blurred. Press the button gently.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 Focus and Shoot
B Notes About Saving Images
open the battery-chamber/memory card slot cover while images are being saved. Removing
the battery or memory card in these circumstances could result in loss of data or in damage to the
camera or card.
• It may take some time for the image to be saved depending on the current settings or the
B Autofocus
The camera may not focus as expected in the following situations. In some rare cases, the subject
may not be in focus despite the fact that the focus area or the focus indicator glows green:
• Subject is very dark
• Objects of sharply differing brightness are included in the scene (e.g. the sun behind the subject
makes that subject appear very dark)
• No contrast between the subject and surroundings (e.g. a portrait subject, wearing a white shirt, is
standing in front of a white wall)
• Several objects are at different distances from the camera (e.g. the subject is inside a cage)
• Subjects with repeating patterns (window blinds, buildings with multiple rows of similarly shaped
windows, etc.)
• Subject is moving rapidly
In the situations noted above, try pressing the shutter-release button halfway to refocus several
times, or focus on another subject positioned at the same distance from the camera as the actual
B Notes About Face Detection
C When the Subject Is Close to the Camera
C AF-assist Illuminator and Flash
If the subject is dimly lit, the AF-assist illuminator (A 89) may light when the shutter-release button
is pressed halfway, and the flash (A 56) may fire when the shutter-release button is pressed all the
way down.
C To Make Sure You Do Not Miss a Shot
If you are concerned that you might miss a shot, press the shutter-release button all the way without
first pressing it halfway.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 Play Back Images
1
Press the c (playback) button.
•
When you switch from shooting mode
to playback mode, the last image saved
will be displayed full-frame.
c (playback)
button
2
Use the multi selector to select an image to
display.
Display the previous image
•
•
•
Display the previous image: H or J
Display the subsequent image: I or K
You can also scroll through images by rotating the
multi selector.
Display the next image
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
Current image number/
total number of images
4 /
4
•
•
Remove the memory card from the camera to play back images saved in the camera’s
internal memory. C is displayed near the current image number/total number of
images display.
To return to shooting mode, press the A button, the shutter-release button, or the
b (e movie-record) button.
C Viewing Images
• Images may be displayed briefly at low resolution while being read from the memory card or
internal memory.
shooting are displayed in full-frame playback mode, depending upon the orientation of the
detected face, the images may be automatically rotated for playback display (except images
captured in a series).
C More Information
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 Play Back Images
Changing How Images Are Displayed
When using playback mode, you can change how images are
displayed by rotating the zoom control to f (h) and g (i).
Playback Zoom
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
g (i)
f
(h)
Displayed area guide
4 /
4
Image is displayed full-frame.
Image is zoomed in.
• You can change the zoom ratio by rotating the zoom control to f (h) and g
(i). Images can be zoomed up to 10×.
• To view a different area of the image, press the multi selector H, I, J, or K.
the time of shooting (except when viewing an image captured in a series). If the
camera detected multiple faces when the image was captured, press H, I, J,
or K to display a different face. To zoom in on an area of the image where there
are no faces, adjust the magnification rate and then press H, I, J, or K.
• You can crop the image and save the displayed area of the image as a separate
file by pressing the d button.
• Press the k button to return to full-frame playback mode.
Thumbnail Display, Calendar Display
f
f
(h)
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 1 . J P G
1 /
2 0
2 0 1 1 1 1
(h)
Su
M
Tu
1
W
Th
3
F
4
Sa
5
2
6
7
8
9
10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28 29 30
3
g (i)
g (i)
1 /
2 0
Full-frame Display
Image Thumbnail Display
(4, 9, and 16 images per screen)
Calendar Display
• You can view several images on one screen, making it easy to find the image
you want.
• You can change the number of thumbnails displayed by rotating the zoom
control to f (h) and g (i).
• Rotate the multi selector, or press H, I, J, or K to select an image and then
press the k button to display that image full-frame.
• When 16 thumbnails are displayed, rotate the zoom control to f (h) to
switch to calendar display.
• While using calendar display mode, rotate the multi selector, or press H, I, J,
or K to select a date and then press the k button to display the first image
captured on that day.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 Delete Unwanted Images
1
Press the l button to delete the image
currently displayed in the monitor.
2
Press the multi selector H or I to select the
desired deletion method and press the k
button.
Delete
•
•
Current image: Only the current image is deleted.
Current image
Erase selected images
All images
Erase selected images: Multiple images can be
selected and deleted. See “Operating the Erase
•
•
All images: All images are deleted.
To exit without deleting, press the d button.
3
Press H or I to select Yes and press the k
button.
Erase
1
image?
•
Deleted images cannot be recovered.
•
To cancel, press H or I to select No and press the k
button.
Yes
No
B Notes About Deletion
• Deleted images cannot be recovered. Copy important images to a computer before deleting
them from the camera.
C Deleting the Last Image Captured While in Shooting Mode
When using shooting mode, press the l button to delete the last image that was saved.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 Delete Unwanted Images
Operating the Erase Selected Images Screen
1
Press the multi selector J or K to select an
image to be deleted, and then press H to
Erase selected images
display y.
•
To undo the selection, press I to remove y.
•
to full-frame playback or f (h) to display
thumbnails.
Back
ON/OFF
2
Add y to all images that you want to delete and then press the k
button to confirm the selection.
•
A confirmation dialog is displayed. Follow the instructions displayed in the monitor.
C Selecting Certain Types of Images for Deletion
images registered as favorites, images in a certain category, or images captured on a specific date for
deletion.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Features
This chapter describes the camera’s shooting modes and the features that are
available when using each shooting mode.
You can select shooting modes and adjust settings according to the shooting
conditions and the kind of images you want capture.
2 9 m 0 s
Smart portrait
7 6 0
Smart portrait
Image mode
Skin softening
Smile timer
Blink proof
2 9 m 0 s
7 6 0
2 9 m 0 s
7 6 0
Auto
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Features
A (Auto) Mode
to suit the shooting conditions and the type of shot you want to capture.
• You can change how the camera selects the area of the frame to focus on by
pressing the d button, selecting the A tab, and then selecting AF area
The default setting is Face priority.
If the camera detects a face, it focuses on that face. See “Using Face Detection”
automatically selects the focus areas (up to nine) that contain the subject
closest to the camera. When the subject is in focus, the focus areas that are in
focus (up to nine areas) glow green.
Changing A (Auto) Mode Settings
C Camera Settings That Cannot Be Applied Simultaneously
36
Download from Www.Somanuals.com. All Manuals Search And Download.
A (Auto) Mode
Options Available in the Auto Shooting Menu
When using A (auto) mode, the following settings can be changed.
Shooting menu
Image mode
White balance
Continuous
ISO sensitivity
Color options
AF area mode
Autofocus mode
Option
Description
A
Allows you to select the combination of image size and image
This setting is also applied to other shooting modes.
Image mode
Allows you to adjust the color tones of the image to match
what you see with your eye. Although Auto (the default
setting) can be used in most shooting conditions, if the
desired color tones are not achieved, adjust white balance to
suit the sky conditions or light source.
White balance
Continuous
•
When white balance is set to settings other than Auto or
Allows you to capture a series of images. When Continuous
is selected, up to six images are captured continuously at a
rate of about 1.2 fps (when image mode is set to P) while the
shutter-release button is held all the way down. The default
setting is Single (i.e., only one image is captured at a time).
Higher ISO sensitivity allows darker subjects to be captured.
Additionally, even with subjects of similar brightness, pictures
can be taken at faster shutter speeds, and blurring caused by
camera shake and subject movement can be reduced. When
ISO sensitivity is set to Auto (default setting), the camera sets
the ISO sensitivity automatically, and E is displayed while
shooting when ISO sensitivity increases.
ISO sensitivity
Allows you to change the color tones of images at the time of
shooting. The available settings are Standard color (default
setting), Vivid color, Black-and-white, Sepia, and
Cyanotype.
Color options
AF area mode
Allows you to determine how the camera selects the focus
area that is used for autofocus; the available settings are Face
priority (default setting), Auto, Manual, and Center.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
A (Auto) Mode
Option
Description
A
When Single AF is selected, the camera focuses only while
the shutter-release button is pressed halfway. When Full-
Autofocus mode time AF is selected, the camera focuses even when the
shutter-release button is not pressed halfway. You may hear
the sound of the camera focusing.
C Camera Settings That Cannot Be Applied Simultaneously
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
When one of the following scenes is selected, camera settings are automatically
optimized for the selected scene.
Enter shooting mode M A (shooting mode) button M x (second icon from the top*) M
* The icon of the last scene selected is displayed. The default setting is x (scene auto
selector).
x
Scene auto selector b Portrait
c Landscape
d Sports
(default setting;
e Night portrait
f Party/indoor
Z Beach
z Snow
h Sunset
i Dusk/dawn
j Night landscape k Close-up
u
Food
l Museum
m Fireworks show
n
Black and white copy
o Backlighting
Panorama assist O Pet portrait
p
C To view a description (help display) of each scene:
Select the desired scene from the scene selection screen and rotate
scene. To return to the original screen, rotate the zoom control to g
(j) again.
Panorama assist
Changing Scene Mode Settings
• Depending on the scene, the multi selector H (X), I (p), J (n), and K (o)
can be used to set the corresponding features. See “Features That Can Be Set
information.
• Features that can be set by pressing the d button: Image mode, which is the
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
Characteristics of Each Scene
x Scene auto selector
The camera automatically selects the optimum scene mode when you frame a picture.
e: Portrait, f: Landscape, h: Night portrait, g: Night landscape, i: Close-up,
j: Backlighting, d: Other scenes
•
•
•
When the camera selects a scene mode, the shooting mode icon displayed in the
shooting screen changes to that for the scene mode currently enabled.
The area of the frame that the camera focuses on (AF area) depends on the composition
of the picture. When the camera detects a human face, it focuses on that face.
more information. Depending upon shooting conditions, the camera may not select the
desired scene mode manually.
•
Digital zoom cannot be used.
b Portrait
Use this mode for portraits.
•
•
•
•
When the camera detects a human face, it focuses on that
The camera softens skin tones by applying the skin
If no faces are detected, the camera focuses on the subject
in the center of the frame.
Digital zoom cannot be used.
c Landscape
Use this mode for vivid landscapes and cityscapes.
•
when the shutter-release button is pressed halfway.
O: Use of a tripod is recommended when using scene modes indicated with O. Set
the camera during shooting.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
d Sports
Use this mode when shooting sporting events. The camera
captures a series of still images that allow you to clearly see
detailed movements in a moving subject.
•
•
The camera focuses on the area in the center of the frame.
Press and hold the shutter-release button all the way to
capture images continuously. Up to six images are captured
continuously at a rate of about 1.2 fps (when image mode is set to P).
The camera focuses even when the shutter-release button is not pressed halfway. You
may hear the sound of the camera focusing.
Focus, exposure, and hue are fixed at the values determined with the first image in each
series.
•
•
•
The frame rate with continuous shooting may vary depending upon the current image
mode setting, the memory card used, or shooting condition.
e Night portrait
O
Use this mode for evening and night portraits that include
background scenery. The flash fires to light the portrait subject
while preserving background lighting to achieve a natural
balance between the main subject and background ambience.
•
When the camera detects a human face, it focuses on that
•
The camera softens skin tones by applying the skin softening function before saving
•
•
If no faces are detected, the camera focuses on the subject in the center of the frame.
Digital zoom cannot be used.
f Party/indoor
Suitable for taking pictures at parties. Captures the effects of
candlelight and other indoor background lighting.
•
•
The camera focuses on the area in the center of the frame.
To avoid the effects of camera shake, hold the camera
steady when shooting in dark surroundings. Set Vibration
tripod to stabilize the camera during shooting.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
Z Beach
Captures the brightness of such subjects as beaches or sunlit
expanses of water.
•
The camera focuses on the area in the center of the frame.
z Snow
Captures the brightness of sunlit snow.
•
The camera focuses on the area in the center of the frame.
h Sunset
O
Preserves the deep hues seen in sunsets and sunrises.
•
The camera focuses on the area in the center of the frame.
i Dusk/dawn
O
Preserves the colors seen in the weak natural light before
sunrise or after sunset.
•
when the shutter-release button is pressed halfway.
j Night landscape
O
Slow shutter speeds are used to capture stunning night
landscapes.
•
Use of a tripod is recommended, but when the camera
determines whether either a tripod is being used or the
camera is hand-held, it changes the shutter-speed
appropriately, therefore night-time landscape shooting
with reduced blurring is possible even when holding the camera by hand.
When using a tripod in Night landscape mode, there is no need to set Vibration
button is pressed halfway.
•
•
O: Use of a tripod is recommended when using scene modes indicated with O. Set
the camera during shooting.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
k Close-up
Use this mode to photograph flowers, insects, and other small
objects at close range.
•
automatically zooms to the closest position at which it can
focus.
•
You can move the area of the frame that the camera
focuses on (AF area). To move the AF area, press the k button, and then rotate the multi
selector or press H, I, J, or K.
To change settings for any of the following functions, first press the k button to cancel
focus-area selection, then change the settings as desired.
-
-
-
Flash mode
Self-timer
Exposure compensation
•
The camera focuses even when the shutter-release button is not pressed halfway. You
may hear the sound of the camera focusing.
u Food
Use this mode when taking pictures of food.
•
automatically zooms to the closest position at which it can
focus.
•
•
You can adjust hue by pressing the multi selector H and I.
The hue setting is saved in the camera’s memory even after
the camera is turned off.
You can move the area of the frame that the camera focuses
on (AF area). To move the AF area, press the k button, and
then rotate the multi selector or press H, I, J, or K.
To change settings for any of the following functions, first
press the k button to cancel focus-area selection, then
change the settings as desired.
2 9 m 0 s
7 6 0
-
-
-
Hue
Self-timer
Exposure compensation
•
The camera focuses even when the shutter-release button is not pressed halfway. You
may hear the sound of the camera focusing.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
l Museum
Use indoors where flash photography is prohibited (for
example, in museums and art galleries) or in other settings in
which you do not want to use the flash.
•
•
The camera focuses on the area in the center of the frame.
The camera captures a series of up to ten images while the
shutter-release button is held all the way down, and the
sharpest image in the series is automatically selected and saved (best shot selector).
m Fireworks show
O
Slow shutter speeds are used to capture the light from
fireworks.
•
•
Camera focuses at infinity.
when the shutter-release button is pressed halfway.
n Black and white copy
Provides clear images of text or drawings on a whiteboard or
in print.
•
•
The camera focuses on the area in the center of the frame.
subjects that are close to the camera.
o Backlighting
Use when light is coming from behind the subject, throwing
features or details into shadow. The flash fires automatically to
“fill in” (illuminate) shadows.
•
The camera focuses on the area in the center of the frame.
O: Use of a tripod is recommended when using scene modes indicated with O. Set
the camera during shooting.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
p Panorama assist
Use this setting to capture a series of images that will be connected using a computer to
•
Press the multi selector H, I, J or K to select the direction that you will move the
camera in when capturing images, and press the k button.
•
After shooting the first image, confirm on the screen how the captured image will be
connected to the next image, and shoot the next image. Shoot as many images as
needed to complete the panorama. To finish shooting, press the k button.
•
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Scene Mode (Shooting Suited to Scenes)
O Pet portrait
Use this mode when taking pictures of dogs or cats. When the
camera detects the face of a dog or cat, the camera focuses on
that face. Once the camera has focused, by default it
automatically releases the shutter (pet portrait auto release).
•
From the screen displayed after the O Pet portrait scene
mode is selected, select Single or Continuous.
-
-
Single: Images are captured one at a time.
Continuous: Three images are captured continuously when a face is focused on (at a
rate of about 1.2 fps when image mode is P 4608×3456). While Continuous is
selected, the F is displayed in the shooting screen.
•
When the camera detects a face, a double border (focus
area) is displayed around the face, and the double border
glows green when the camera has focused.
The faces of up to five pets can be detected at the same
time. When the camera detects more than one face, the face
displayed largest in the monitor is framed by a double
border and the others by single borders.
If no pet faces are detected, the shutter can be released by
pressing the shutter-release button.
2 9 m 0 s
7 6 0
•
•
-
If no pet faces are detected, the camera focuses on the subject at the center of the
frame.
-
When Continuous is selected, up to three images are captured continuously at a rate
of about 1.2 fps (when image mode is set to P 4608×3456) while the shutter-release
button is held all the way down.
Press the multi selector J (n) to change auto release settings.
-
Pet portrait auto release (default setting): The camera automatically releases the
shutter when it focuses on the detected face. While Pet portrait auto release is
selected, the d icon is displayed in the shooting screen.
-
Off: The shutter is released only when the shutter-release button is pressed.
•
•
Digital zoom cannot be used.
Depending on the distance of the pet from the camera, the speed of the pet’s movement,
the direction the pet is facing, the ambient brightness of the pet’s face, etc., pet faces may
not be detected and other subjects may be displayed with a border.
Pet portrait auto release is automatically set to Off in the following situations.
-
-
•
When five series of images are captured using auto release
When there is no remaining space in the internal memory or on the memory card
To continue using Pet portrait auto release to take more pictures, press the multi
selector J (n) and change the setting again.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Special Effects Mode (Applying Effects When Shooting)
Effects can be applied to images during shooting.
Enter shooting mode M A (shooting mode) button M D (third icon from the top*) M
* The icon of the last effect selected is displayed. The default setting is D (soft).
The following six effects are available.
Selective color
Category
Description
D Soft
(default setting)
Softens the image by adding a slight blur to the entire image.
Adds a sepia tone and reduces the contrast to simulate the qualities
of an old photograph.
E Nostalgic sepia
F High-contrast
monochrome
Changes the image to black and white and gives it sharp contrast.
G High key
Gives the entire image a bright tone.
H Low key
Gives the entire image a dark tone.
I Selective color
Creates a black and white image in which only the specified color remains.
• The camera focuses on the area in the center of the frame.
• When Selective color is selected, rotate the multi
selector or press H or I to select the desired color
from the slider.
To change settings for any of the following
functions, first press the k button to cancel color
selection, then change the settings as desired.
Save
-
-
-
-
Slider
To return to the color selection screen, press the k
button again.
2 9 m 0 s
7 6 0
Select color
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Portrait Mode (Shooting Smiling Faces)
When the camera detects a smiling face, you can take a picture automatically
without pressing the shutter-release button (smile timer). You can use the skin
softening option to smooth the skin tones in human faces.
1
Without pressing the shutter-release button,
frame the picture and wait for the subject to smile.
•
When the camera detects a human face, a yellow
double border (focus area) is displayed around that face.
When the camera has focused on that face, the double
border will turn green for a moment and focus is locked.
Up to three faces can be detected. When the camera
detects more than one face, a double border is
1 / 2 5 0
F 3.2
•
displayed around the face closest to the center of the frame, and single borders are
displayed around the other faces.
•
•
If the camera detects that the face framed by the double border is smiling, the Smile
After the camera releases the shutter, it will continue to detect faces and smiles, and
will release the shutter again if it detects a smiling face.
2
Shooting ends.
•
Any one of the following operations can be used to cancel smile detection and stop
shooting.
-
-
-
Turn the camera off.
Press the A button and select a different shooting mode.
B Notes About Smart Portrait Mode
• Digital zoom cannot be used.
• Under some shooting conditions, the camera may be unable to detect faces or detect smiles.
C Auto Power Off in Smile Timer Mode
off when either of the situations indicated below persists and no other operations are performed.
• The camera does not detect any faces.
• The camera detected a face, but cannot detect a smile.
C When the Self-timer Lamp Blinks
When using smile timer, the self-timer lamp blinks when the camera detects a face and flickers
immediately after the shutter is released.
C Releasing the Shutter Manually
The shutter can also be released by pressing the shutter-release button. If no faces are detected, the
camera focuses on the subject at the center of the frame.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Smart Portrait Mode (Shooting Smiling Faces)
Changing Smart Portrait Mode Settings
• Features that can be set by pressing the d button: Options available in the
smart portrait menu.
C Camera Settings That Cannot Be Applied Simultaneously
Options Available in the Smart Portrait Menu
When using F smart portrait mode, the following settings can be changed.
Smart portrait
Image mode
Skin softening
Smile timer
Blink proof
Option
Description
A
Allows you to select the combination of image size and
change the image mode setting, the new setting is applied
to all shooting modes.
Image mode
Enable skin softening. The camera softens skin tones by
applying the skin softening function before saving images.
You can select the amount of effect that is applied. The
default setting is Normal.
Skin softening
Smile timer
When On (default setting) is selected, the camera detects
human faces and then automatically releases the shutter
whenever a smile is detected. Self-timer cannot be used
with this feature.
When On is selected, the camera automatically releases the
shutter twice each time a picture is taken. Of the two shots,
one in which the subject’s eyes are open is saved.
The flash cannot be used when On is selected.
The default setting is Off.
Blink proof
C Camera Settings That Cannot Be Applied Simultaneously
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject Tracking Mode (Focusing on a Moving Subject)
Use this mode to focus on a subject that is moving when taking pictures.
Enter shooting mode M A (shooting mode) button M s Subject tracking mode (
When you register a subject, subject tracking begins and the focus area
automatically follows the subject.
1
Register a subject.
•
When taking pictures of people:
a human face and then automatically register that
person as the subject to be tracked.
If the subject is not registered automatically, align the
subject that you want to register with the white border
in the center of the monitor and press the k button.
End
•
When taking pictures of non-human subjects:
Align the subject that you want to register with the
white border in the center of the monitor and press the
k button.
If a person visible in the frame was automatically
registered, set Face priority tracking to Off and
register the desired subject again.
Start
•
•
When the camera is unable to focus on the subject, the border will glow red. Change
the composition and try registering the subject again.
When the subject is registered, a yellow border (focus area) is displayed around that
subject and the camera begins tracking that subject.
•
•
To cancel subject registration, press the k button.
If the camera cannot track the registered subject anymore, the focus area will
disappear and the registration will be canceled. Register the subject again.
2
Press the shutter-release button to take a
picture.
•
The camera focuses on the focus area when the shutter
release button is pressed halfway. The focus area will
glow green and focus will be locked.
•
Press the shutter-release button all the way down to
release the shutter.
1 / 2 5 0
F 3.2
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject Tracking Mode (Focusing on a Moving Subject)
B Notes About Subject Tracking Mode
• Adjust zoom position, flash mode, exposure compensation, and menu settings prior to registering
the subject.
• Subject tracking may not be possible in certain shooting conditions.
• Digital zoom cannot be used.
Changing Subject Tracking Mode Settings
• Features that can be set by pressing the d button: Options available in the
C Camera Settings That Cannot Be Applied Simultaneously
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject Tracking Mode (Focusing on a Moving Subject)
Options Available in the Subject Tracking Menu
When using s subject tracking mode, the following settings can be changed.
Subject tracking
Image mode
Autofocus mode
Face priority tracking
Option
Description
A
Allows you to select the combination of image size and
change the image mode setting, the new setting is
applied to all shooting modes.
Image mode
mode.
When Full-time AF (default setting) is selected, once a
subject is registered for subject tracking, the camera
continuously focuses until the shutter-release button is
pressed halfway to lock the focus. The sound of the lens
drive will be heard while the camera focuses.
Changes made to the autofocus mode setting in this
mode will not be applied to the autofocus mode setting
in A (auto) mode. The autofocus mode setting applied
in subject tracking mode is saved in the camera’s
memory even after the camera is turned off.
Autofocus mode
When On is selected (default setting), if the camera
detects a person’s face, that person is automatically
registered as the subject to be tracked, and subject
Face priority tracking tracking begins tracking that person.
If a person whom you do not want to track is
automatically registered, or when shooting non-human
subjects, select Off if a person is in the frame.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Subject Tracking Mode (Focusing on a Moving Subject)
B Notes About Face Priority Tracking
• Only one subject can be tracked. If the camera detects multiple faces at the same time, the face
closest to the center of the frame is tracked.
• When the frame includes more than one face, the face detected by the camera and registered as
the subject to be tracked depends upon a variety of factors, including the direction in which the
faces are looking.
• Depending on shooting conditions, such as whether or not the subject is facing the camera, the
face may not be detected properly. Additionally, the camera may be unable to detect faces in the
following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
• When the camera is unable to track the registered subject, press the k button to track again, or
set Face priority tracking to Off, frame the picture so that the subject is inside the border in the
center of the frame, and press the k button to register the subject again.
C Camera Settings That Cannot Be Applied Simultaneously
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
When shooting, the multi selector H (X), I (p), J (n), and K (o) can be used
to set the following features.
X (flash mode)
n (self-timer),
pet portrait auto release
o (exposure compensation)
p (macro mode)
Available Features
The features that are available vary with the shooting mode, as shown below.
settings.
Smart
Portrait
Mode
Subject
Tracking
Mode
Special
Effects
A (auto)
Scene
2
X
w
w
w
w
w
w
2
w
–
n
Pet portrait auto release
–
–
–
–
–
–
1
p
o
w
w
w
w
Exposure compensation
w
w
1
2
information.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Using the Flash (Flash Modes)
You can set the flash mode to match the shooting conditions.
1
2
Press the multi selector H (m flash mode).
Use the multi selector to select the desired
mode and press the k button.
•
•
•
information.
If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
When U (auto) is applied, D is only displayed for
a few seconds, regardless of Monitor settings
Auto
2 9 m 0 s
7 6 0
3
Frame the subject and take a picture.
•
The flash lamp indicates the status of the flash
when you press the shutter-release button
halfway.
-
On: The flash will fire when you press the
shutter-release button all the way down.
-
-
Blinking: The flash is charging. The camera cannot take pictures.
Off: The flash will not fire when a picture is taken.
•
If the battery is low, the monitor will turn off in order to save power while the flash is
charging.
C Effective Range of the Flash
When ISO sensitivity is set to Auto, the flash has a range of 0.5 to 4.6 m (1 ft 8 in. to 15 ft) at the
maximum wide-angle zoom position and a range of 0.5 to 3.0 m (1 ft 8 in. to 9 ft 10 in.) at the
maximum telephoto zoom position.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Available Flash Modes
Auto
U
V
W
The flash fires automatically when lighting is dim.
Auto with red-eye reduction
Reduce red-eye in portraits caused by the flash.
Off
The flash will not fire.
We recommend using a tripod to stabilize the camera when shooting in dark
surroundings.
Fill flash
X
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.
Slow sync
Y
Auto flash mode is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
The flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
C The Flash Mode Setting
• The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the
camera is turned off.
C Red-eye Reduction
This camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).
If the camera detects red eye while saving an image, the affected area will be processed to reduce
red-eye before the image is saved.
Note the following when shooting:
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in all situations.
• In some cases, red-eye correction may be applied to areas of an image unnecessarily. In these
cases, select another flash mode and take the picture again.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Using the Self-timer
The camera is equipped with a self-timer that releases the shutter ten seconds or two
seconds after you press the shutter-release button. The self-timer is useful when you
want to be in the picture you are taking, and when you want to avoid the effects of
camera shake that occur when you press the shutter-release button. When using the
self-timer, use of a tripod is recommended. Set Vibration reduction to Off in the
setup menu (A
88) when using a tripod to stabilize the camera during shooting.
1
2
Press the multi selector J (n self-timer).
Use the multi selector to select 10s or 2s and
press the k button.
•
•
•
10s (ten seconds): Use on important occasions, such as weddings.
2s (two seconds): Use to prevent camera shake.
When the shooting mode is the Pet portrait scene
The self-timer settings 10s and 2s cannot be used.
The mode selected for self-timer is displayed.
Self-timer
•
•
If a setting is not applied by pressing the k button within a few seconds, the
selection will be canceled.
3
4
Frame the picture and press the
shutter-release button halfway.
•
Focus and exposure will be set.
1 / 2 5 0
F 3.2
Press the shutter-release button the
rest of the way down.
•
The self-timer starts, and the number of seconds
remaining before the shutter is released is
displayed in the monitor. The self-timer lamp
blinks while the timer is counting down. About
one second before the shutter is released, the
lamp stops blinking and glows steadily.
When the shutter is released, the self-timer
will be set to OFF.
1 / 2 5 0
F 3.2
•
•
To stop the timer before a picture is taken,
press the shutter-release button again.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Using Macro Mode
When using macro mode, the camera can focus on objects as close as 10 cm (4 in.)
from the front of the lens.
This feature is useful when taking close-up pictures of flowers and other small
subjects.
1
Press the multi selector I (p macro mode).
2
Use the multi selector to select ON and press
the k button.
•
The macro mode icon (F) is displayed.
•
If a setting is not applied by pressing the k button
within a few seconds, the selection will be canceled.
Macro mode
3
Use the zoom control to set the zoom ratio to
a position where F and the zoom indicator
glow green.
•
How close you can be to the subject when shooting depends on the zoom ratio.
When the zoom ratio is set to a position where F and the zoom indicator glow green,
the camera can focus on subjects as close as 30 cm (1 ft) from the lens. When the
zoom is at the maximum wide-angle position, (at the position where G is displayed),
the camera can focus on subjects as close as 10 cm (4 in.) from the lens.
B Notes About Using the Flash
The flash may be unable to light the entire subject at distances of less than 50 cm (1 ft 8 in.).
C Autofocus
When using macro mode in the A (auto) mode, you can focus without pressing the shutter-release
When using other shooting modes, Full-time AF is turned on automatically when macro mode is
turned on (except when using the Pet portrait scene mode).
You may hear the sound of the camera focusing.
C The Macro Mode Setting
for more information.
• The macro mode setting applied in A (auto) mode is saved in the camera’s memory even after
the camera is turned off, and reapplied the next time A (auto) mode is selected.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Adjusting Brightness (Exposure Compensation)
By adjusting exposure compensation when taking pictures, you can adjust overall
image brightness.
1
Press the multi selector K (o exposure
compensation).
2
Use the multi selector to select a
compensation value.
+0.3
•
To make the image brighter, apply positive (+)
exposure compensation.
•
To make the image darker, apply negative (–) exposure
compensation.
+0.3
Exposure compensation
3
4
Press the k button to apply the
compensation value.
•
If you do not press the k button within a few seconds,
the setting will be applied and the menu will
disappear.
2 9 m 0 s
7 6 0
+0.3
•
When an exposure compensation value other than 0.0
is applied, the value is displayed with the H indicator
in the monitor.
Press the shutter-release button to take a picture.
•
To turn off exposure compensation, return to step 1 and change the value to 0.0.
C Exposure Compensation Value
The exposure compensation value applied in A (auto) mode is saved in the camera’s memory even
after the camera is turned off.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Default Settings
Default settings for each shooting mode are described below.
• Information about scene mode can be found on the next page.
Exposure
compensation
Flash
Self-timer
Macro
A (auto)
U
Off
Off
Off
Off
Off
0.0
0.0
0.0
0.0
Special effects
Smart portrait
Subject tracking
W
Off
Off
Off
1
2
3
3
U
U
3
1
2
3
Cannot be used when Blink proof is set to On.
Can be set when Smile timer is set to Off.
The setting cannot be changed.
• The setting applied in A (auto) mode is saved in the camera’s memory even
after the camera is turned off except for the self-timer setting.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Can Be Set Using the Multi Selector
Default settings for scene mode are described below.
Exposure
compensation
Flash
Self-timer
Macro
1
2
2
2
2
2
2
2
2
2
2
2
2
2
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
0.0
U
V
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
On
On
Off
Off
Off
Off
Off
Off
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
0.0
2
W
2
2
W
3
V
V
4
U
U
2
W
2
W
2
W
W
2
u
W
2
W
2
2
2
2
2
W
W
2
X
W
2
5
W
Y
1
U (auto) and W (off) can be selected. When U (auto) is selected, the camera
automatically selects the flash mode appropriate for the scene it has selected.
The setting cannot be changed.
2
3
The setting cannot be changed. The flash mode setting is fixed at fill flash with slow sync
and red-eye reduction.
Slow sync with red-eye reduction flash mode may be used.
4
5
B Camera Settings That Cannot Be Applied Simultaneously
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Image Size (Image Mode)
Enter shooting mode M d button M Shooting menu M Image mode
You can use the Image mode setting in the shooting menu to select the
combination of image size and compression ratio that is used when saving images.
Select the image mode best suited to the manner in which images will be used
and the capacity of the internal memory or memory card. The higher the image
mode setting, the larger the size at which it can be printed, but the number of
images that can be saved is reduced.
Image Mode Settings (Image Size and Quality)
Image mode*
Description
Images will be higher quality than P. The compression ratio is
approximately 1:4.
Q 4608×3456P
P 4608×3456
(default setting)
Best choice in most situations. The compression ratio is
approximately 1:8.
I 4000×3000
R 3264×2448
L 2592×1944
Smaller size than P, I, R, or L and therefore allows more images
to be saved. The compression ratio is approximately 1:8.
M 2048×1536
N 1024×768
O 640×480
Suited to display on a computer monitor. The compression ratio is
approximately 1:8.
Suited to full-screen display on a TV with an aspect ratio of 4:3, or
distribution by e-mail. The compression ratio is approximately 1:8.
Images with an aspect ratio of 16:9 are saved. The compression ratio
is approximately 1:8.
l 4608×2592
* The total number of pixels captured, and the number of pixels captured horizontally and
vertically.
Example: P 4608×3456 = approx. 16 megapixels, 4608 × 3456 pixels
The icon for the current setting is displayed in the monitor in shooting and
C Notes About Image Mode
• The setting is also applied to other shooting modes.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Image Size (Image Mode)
C Number of Images That Can Be Saved
The following table lists the approximate number of images that can be saved in the internal
memory and on a 4 GB memory card. Note that due to JPEG compression, the number of images
that can be saved varies greatly depending on the composition of the image. In addition, this
number may vary depending on the make of the memory card, even when the memory cards have
the same specified capacity.
1
Internal memory
(approx. 74 MB)
Memory card
(4 GB)
2
Image mode
Print size (cm/in.)
Q 4608×3456P
P 4608×3456
I 4000×3000
R 3264×2448
L 2592×1944
M 2048×1536
N 1024×768
O 640×480
7
380
39 × 29/15 × 11.5
39 × 29/15 × 11.5
34 × 25/13 × 10
28 × 21/11 × 8
22 × 16/8.5 × 6.5
17 × 13/7 × 5
14
18
760
1000
1570
2560
4230
12700
24600
1010
29
47
79
229
445
18
9 × 7/3.5 × 2.5
5 × 4/2 × 1.5
l 4608×2592
39 × 22/15 × 8.5
1
2
If the number of exposures remaining is 10,000 or more, the number of exposures
remaining display shows “9999”.
Print size at an output resolution of 300 dpi. Print sizes are calculated by dividing the
number of pixels by printer resolution (dpi) and multiplying by 2.54 cm (1 in.). However, at
the same image size, images printed at higher resolutions will print smaller than the size
indicated, and those printed at lower resolutions will print larger than the size indicated.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Cannot Be Used Simultaneously
Some shooting settings cannot be used with other functions.
Restricted
function
Option
Descriptions
When Continuous, BSS, or Multi-shot 16
is selected, the flash cannot be used.
Flash mode
When Blink proof is set to On, the flash
cannot be used.
When Smile timer is used for shooting, the
self-timer cannot be used.
Self-timer
When Multi-shot 16 is selected, the
Image mode setting is fixed at L (image
size: 2560 × 1920 pixels).
Image mode
When using Black-and-white, Sepia, or
Cyanotype, the White balance setting is
fixed at Auto.
White balance
Continuous
When using the self-timer, Continuous is
fixed at Single.
When Multi-shot 16 is selected, the ISO
sensitivity setting is automatically
specified according to the brightness.
ISO sensitivity
When Multi-shot 16 is selected, Motion
detection is disabled.
Motion detection
When the ISO sensitivity is set to any setting
other than Auto, Motion detection is
disabled.
When Continuous, BSS, or Multi-shot 16
Blink warning
Digital zoom
is selected, Blink warning is disabled.
When Multi-shot 16 is selected, digital
zoom cannot be used.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Features That Cannot Be Used Simultaneously
Restricted
Option
Descriptions
function
When Continuous, BSS, or Multi-shot 16
is selected, the shutter sound is not heard.
Shutter sound
B Notes About Digital Zoom
• Depending on the shooting mode or the current settings, digital zoom may not be available
• When digital zoom is in effect, the camera focuses in the center of the frame.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face Detection
In the following shooting modes, the camera uses face
detection to automatically focus on human faces. If the
camera detects more than one face, a double border is
displayed around the face that the camera will focus
on, and single borders are displayed around the other
faces.
2 9 m 0 s
7 6 0
Number of faces that
Shooting mode
Focus area (double border)
can be detected
A (auto) mode is set to Face
priority.
Up to 12 The face closest to the camera
Scene auto selector, Portrait,
Night portrait scene mode
The face closest to the center of
the frame
Up to 3
• When using A (auto) mode, if you press the shutter-release button halfway
while no faces are detected or while framing a shot with no faces in it, the
camera selects the focus area (up to nine areas) containing the subject closest
to the camera.
• When Scene auto selector is selected, the focus area changes depending on
which scene the camera selects.
• If no faces are detected when the shutter-release button is pressed halfway in
Portrait and Night portrait scene modes or in smart portrait mode, the
camera will focus on the subject in the center of the frame.
B Notes About Face Detection
• The camera’s ability to detect faces depends on a variety of factors, including whether or not the
subject is facing the camera. Additionally, the camera may be unable to detect faces in the
following situations:
- When faces are partially hidden by sunglasses or otherwise obstructed
- When faces take up too much or too little of the frame
• When the frame includes more than one face, the faces detected by the camera and the face on
which the camera focuses depend upon a variety of factors, including the direction in which the
faces are looking.
focus even though the double border turns green. If the camera does not focus, change AF area
on another subject that is the same distance from the camera.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Face Detection
B Viewing Images That Were Captured Using Face Detection
• During playback, the camera automatically rotates images according to the orientation of the
faces that were detected at the time of shooting (except when viewing an image captured in a
series).
• When zooming in on an image displayed full-frame by rotating the zoom control to g (i), the
image will be enlarged so that the face that was detected at the time of shooting is displayed in
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Skin Softening
When the shutter is released when using one of the following shooting modes,
the camera detects one or more human faces (up to three), and processes the
image to soften facial skin tones before saving the image.
•
scene mode is selected.
B Notes About Skin Softening
• It may take more time than usual to save images after shooting.
• Under some shooting conditions, the desired skin softening results may not be achieved, and skin
softening may be applied to areas of the image where there are no faces. If the desired results are
not produced, switch to another shooting mode and then try shooting again.
• The skin softening level cannot be adjusted when Portrait or Night portrait is selected in scene
mode.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lock
You can use focus lock to focus on off-center subjects when center is selected for
AF area mode.
The following procedure describes how to use focus lock when using A (auto)
1
2
3
4
Position the subject in the center of the frame.
2 9 m 0 s
7 6 0
Press the shutter-release button
halfway.
•
Confirm that the focus area glows green.
•
Focus and exposure are locked.
1 / 2 5 0
F 3.2
Continue holding down the shutter-release
button halfway and recompose the picture.
•
Be sure to maintain the same distance between the
camera and the subject while the shutter-release
button is pressed halfway.
1
/
2
5
0
F 3.2
Press the shutter-release button the rest of
the way down to take the picture.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features
This chapter describes how to select certain types of images for playback as well as
some of the features available when playing back images.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
Auto sort
4 /
4
Auto sort
Quick retouch
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
4 /
4
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Features
Selecting Certain Types of Images for Playback
You can change the playback mode according to the type of images you want to
view.
Available Playback Modes
c
h
F
C
Play
All images are played back. When you switch from shooting mode to playback mode,
this mode is selected.
Favorite pictures
Play back images added to an album. You must add images to an album before you
Auto sort
Images are automatically sorted in to categories, such as portraits, landscapes, and
movies.
List by date
Images captured on the selected date are played back.
Switching Between Playback Modes
1
When viewing images in full-frame
playback mode or thumbnail playback
mode, press the c button.
•
The playback-mode selection menu is
displayed, from which you can select one of
the available playback modes.
2
Use the multi selector to select the desired
mode and press the k button.
•
If you select Play, the playback screen is displayed.
Auto sort
•
When an option other than Play is selected, the album,
category, or shooting date selection screen is displayed.
•
To return to the current playback mode without
switching playback modes, press the c button.
3
Select an album, category, or shooting date, and press the k button.
•
Repeat from step 1 to select a different album, category, or shooting date.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Features Available in Playback Mode (Playback Menu)
When viewing images in full-frame playback mode or thumbnail playback mode,
display the menu, and then selecting the c tab, h tab, F tab, or C tab.
Option
Description
A
Allows you to create retouched copies in which contrast
and saturation have been enhanced.
1
k Quick retouch
Allows you to create copies with enhanced brightness and
contrast, brightening dark portions of an image.
1
I D-Lighting
When this feature is enabled, the camera detects faces in
images and creates a copy with softer facial skin tones.
1
e Skin softening
Digital filter effects can be used to apply a variety of effects
screen, Fisheye, Miniature effect, and Painting.
1
p Filter effects
When using a printer to print images saved on the memory
card, you can use the Print order function to select which
images are printed, and how many copies of each image
2
a Print order
are printed.
Allows you to view images saved in the internal memory or
2
b Slide show
on a memory card in an automatic slide show.
2
d Protect
Protects selected images from accidental deletion.
Specifies the orientation in which saved images are
displayed with playback.
f Rotate image
Creates a small copy of the current image. This feature is
useful for creating copies for display on Web pages or e-
mail attachments.
1
g Small picture
Allows you to use the camera’s microphone to record voice
and delete voice memos.
E Voice memo
Allows you to copy images between the internal memory
and a memory card.
3
h Copy
1
be edited, and the same editing feature cannot be applied multiple times.
apply the same function to all images captured on the selected date.
This function is not displayed when using favorite pictures mode, auto sort mode, or list by
date mode.
2
3
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV, Computer, or Printer
You can enhance your enjoyment of images and movies by connecting the
camera to a TV, computer, or printer.
• Before connecting the camera to an external device, make sure the remaining
battery level is sufficient and turn the camera off. For information about the
connection methods and subsequent operations, refer to the documentation
included with the device in addition to this document.
HDMI mini connector
(Type C)
USB/audio/video
output connector
How to open the
connector cover.
Insert the plug
straight.
How to open the HDMI
connector cover.
Viewing images on a TV
You can view the camera’s images and movies on a TV.
Connection method: Connect the video and audio plugs of the included
Audio Video Cable EG-CP16 to the TV’s input jacks. Alternatively, connect
a commercially available HDMI cable (Type C) to the TV’s HDMI input jack.
Viewing and organizing images on a computer
If you transfer images to a computer, you can perform simple
retouching and manage image data in addition to playing back images
and movies.
Connection method: Connect the camera to the computer’s USB input
jack with the included USB Cable UC-E6.
•
Before connecting to a computer, install ViewNX 2 on the computer
using the included ViewNX 2 Installer CD-ROM. For information about
using the ViewNX 2 Installer CD-ROM and transferring images to a
computer, see page 75.
•
•
If any USB devices that draw the power from the computer are
connected, disconnect them from the computer before you connect
the camera to it.
Connecting the camera and other USB-powered devices to the same
computer simultaneously may cause a camera malfunction or
excessive power supply from the computer, which could damage the
camera or memory card.
Printing images without using a computer
If you connect the camera to a PictBridge-compatible printer, you can
print images without using a computer.
Connection method: Connect the camera directly to the printer’s USB
input jack with the included USB Cable UC-E6.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
ViewNX 2 is an all-in-one software package which enables you to transfer, view,
edit and share images.
Install ViewNX 2 using the ViewNX 2 Installer CD-ROM.
ViewNX 2™
Your Imaging Toolbox
Installing ViewNX 2
• An Internet connection is required.
Compatible Operating Systems
Windows
• Windows 7 Home Basic/Home Premium/Professional/Enterprise/Ultimate
• Windows Vista Home Basic/Home Premium/Business/Enterprise/Ultimate
(Service Pack 2)
• Windows XP Home Edition/Professional (Service Pack 3)
Mac OS
• Mac OS X (version 10.5.8, 10.6.7)
Refer to the Nikon website for the latest information on operating system
compatibility.
1
Start the computer and insert the ViewNX 2 Installer CD-ROM into the
CD-ROM drive.
•
Mac OS: When the ViewNX 2 window is displayed, double-click the Welcome icon.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
2
Select a language in the language selection dialog to open the
installation window.
•
If the desired language is not available, click Region Selection to choose a different
region and then choose the desired language (the Region Selection button is not
available in the European release).
•
The installation window is displayed.
3
Start the installer.
•
We recommend clicking Installation Guide in the installation window to check the
installation help information and system requirements before installing ViewNX 2.
•
Click Typical Installation (Recommended) in the installation window.
4
5
Download the software.
•
When the Software Download screen is displayed, click I agree - Begin download.
•
Follow the on-screen instructions to install the software.
Exit the installer when the installation completion screen is displayed.
•
Windows: Click Yes.
•
Mac OS: Click OK.
The following software is installed:
•
ViewNX 2 (consisting of the three modules below)
-
-
-
Nikon Transfer 2: For transferring images to the computer
ViewNX 2: For viewing, editing, and printing transferred images
Movie Editor: For basic editing of transferred movies
•
•
Panorama Maker 5 (for creating a single panorama photo using a series of images shot
in panorama assist scene mode)
QuickTime (Windows only)
6
Remove the ViewNX 2 Installer CD-ROM from the CD-ROM drive.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
Transferring Images to the Computer
1
Choose how images will be copied to the computer.
Choose one of the following methods:
•
Direct USB connection: Turn the camera off and ensure that the memory card is
inserted in the camera. Connect the camera to the computer using the supplied USB
Cable UC-E6. The camera automatically turns on.
•
•
SD card slot: If your computer is equipped with an SD card slot, the card can be
inserted directly in the slot.
SD card reader: Connect a card reader (available separately from third-party
suppliers) to the computer and insert the memory card.
If a message is displayed prompting you to choose a program, select Nikon Transfer 2.
•
When using Windows 7
If the dialog shown at right is displayed,
follow the steps below to select Nikon
Transfer 2.
1 Select Nikon Transfer 2 for Import
pictures and videos. Under Import
pictures and videos, click Change
program. A program selection dialog
will be displayed; select Import File using Nikon Transfer 2 and click OK.
2 Double-click Import File.
If the memory card contains a large number of images, it may take a while for Nikon
Transfer 2 to start. Wait until Nikon Transfer 2 starts.
B Connecting the USB Cable
The connection may not be recognized if the camera is connected to the computer via a USB hub.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
2
Transfer images to the computer.
•
Confirm that the name of the connected camera or removable disk is displayed in the
“Source” panel in the Nikon Transfer 2 “Options” area (1).
•
Click Start Transfer (2).
1
2
•
At default settings, all the images on the memory card will be copied to the
computer.
3
Terminate the connection.
•
If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
•
If a card reader or card slot is used, choose the appropriate option in the computer
operating system to eject the removable disk corresponding to the memory card and
then remove the card from the card reader or card slot.
Viewing Images
Start ViewNX 2.
•
Images are displayed in ViewNX 2 when transfer
is complete.
•
Consult online help for more information on
using ViewNX 2.
C Starting ViewNX 2 Manually
• Windows: Double-click the ViewNX 2 shortcut icon on the desktop.
• Mac OS: Click the ViewNX 2 icon in the Dock.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Using ViewNX 2
Retouching Photographs
Click Edit in the ViewNX 2 toolbar.
Image editing functions include tone compensation, sharpness adjustment, and
trimming (cropping).
Editing Movies
Click Movie Editor in the ViewNX 2 toolbar.
Movie editing functions include the ability to delete unwanted scenes.
Printing Images
Click Print in the ViewNX 2 toolbar.
A dialog is displayed and images can be printed using a printer connected to the
computer.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Playing Back
Movies
You can record movies by simply pressing the b (e movie-record) button.
2 9 m 0 s
7 6 0
1 4 m 3 0 s
In playback mode, press the k button to play a movie.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 1 0 . M O V
1 0 s
4 s
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording and Playing Back Movies
Recording Movies
You can record movies by simply pressing the b (e movie-record) button.
Color tones, white balance, and other settings are the same when recording
movies as they are when taking pictures.
1
Display the shooting screen.
Movie option
•
The icon for the selected movie option is displayed.
The default setting is n HD 720p (1280×720)
* The remaining recording time shown in the
illustrations in this manual is for example purposes
only.
2 9 m 0 s
7 6 0
Maximum Movie Length*
2
Press the b (e movie-record) button
to start movie recording.
•
The camera focuses on the subject in the
center of the frame. Focus areas are not
displayed during recording.
•
When n HD 720p (1280×720) or p iFrame 540
(960×540) is selected for Movie options, monitor
display changes to an aspect ratio of 16:9 with movie
recording (the area indicated on the right is recorded).
•
setup menu is set to Movie frame+auto info, the area
that will be visible in the movie can be confirmed
before movie recording starts.
1 4 m 3 0 s
•
•
The approximate remaining movie length is displayed. C is displayed while saving to
the internal memory.
Recording stops automatically when the maximum movie length has been recorded.
3
Press the b (e movie-record) button again to end recording.
B Notes About Saving Movies
After a movie has been recorded, it is not fully saved to the internal memory or memory card until
monitor display returns to the shooting display. Do not open the battery-chamber/memory card
slot cover before movies have been fully saved. Removing the memory card or the battery while a
movie is being saved may result in loss of the movie data or damage to the camera or to the
memory card.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Movies
B Notes About Movie Recording
• Memory cards with an SD Speed Class rating of 6 or faster are recommended when recording
Class rating are used.
• There may be some degradation in image quality when digital zoom is used. When recording
ends, digital zoom turns off.
• The sounds of zoom control operation, zoom, autofocus lens drive movement, vibration
reduction, and aperture operation when brightness changes may be recorded.
bright objects such as the sun, reflections of the sun, and electric lights is recommended.
• Depending on the distance to the subject or the amount of zoom applied, subjects with repeating
patterns (fabrics, lattice windows, etc.) may have colored stripes (interference patterns, moire, etc.)
in them during movie recording and playback. This occurs when the pattern in the subject and the
layout of the image sensor interfere with each other; it is not a malfunction.
B Camera Temperature
• The camera may become warm when shooting movies for an extended period of time or when
the camera is used in a hot area.
• If the inside of the camera becomes extremely hot when
recording movies, the camera will automatically stop recording
after 30 seconds.
The amount of time remaining until the camera stops recording
(B30 s) is displayed.
Five seconds after the camera stops recording, it turns itself off.
Leave the camera off until the inside of the camera has cooled.
1 4 m 3 0 s
B Notes About Autofocus
1. Set Autofocus mode in the movie menu to A Single AF (default setting) before starting
movie recording.
2. Frame another subject—positioned at the same distance from the camera as the intended
subject—in the center of the frame, press the b (e movie-record) button to start recording, and
then modify the composition.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Movies
C Movie Options and Maximum Movie Length
Internal memory
Memory card (4 GB)*
(approx. 74 MB)
n HD 720p (1280×720)
(default setting)
1 min 14 s
1 h 20 min
p iFrame 540 (960×540)
m VGA (640×480)
21 s
20 min
2 min 38 s
2 h 55 min
All figures are approximate. The maximum movie length may vary depending on the make of the
memory card, even among memory cards of the same capacity.
* The maximum file size for a single movie is 4 GB and the maximum movie length for a single
movie is 29 minutes, even when there is sufficient free space on the memory card for longer
recording. When recording a movie, the remaining recording time that is displayed is the amount
of recording time available for one movie.
C Functions Available with Movie Recording
• The exposure compensation, white balance, and color options settings for the current shooting
subjects closer to the camera can be recorded. Confirm settings before starting movie recording.
self-timer is enabled, the camera focuses on the subject in the center of the frame and starts movie
recording after the specified two or ten seconds.
• The flash will not fire.
• Press the d button to select the D (movie) tab and adjust movie menu settings before starting
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Movies
Changing Movie Recording Settings (the Movie Menu)
The following settings can be changed.
Movie
Movie options
Autofocus mode
Wind noise reduction
Option
Description
A
The following movie types are available: n HD 720p
(1280×720), p iFrame 540 (960×540), and m
VGA (640×480).
Movie options
When A Single AF (default setting) is selected, focus
is locked when movie recording begins. When B
Full-time AF is selected, the camera focuses
continuously while recording.
When B Full-time AF is selected, the sound of the
camera focusing may be heard in recorded movies. If you
want to prevent the sound of the camera focusing from
being recorded, select A Single AF.
Autofocus mode
Set whether or not to reduce wind noise during movie
recording.
Wind noise reduction
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Back Movies
Press the cbutton to enter playback
mode.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 1 0 . M O V
Movies are indicated by the movie
Movie options
Press the kbutton to play back movies.
1 0 s
Functions Available During Playback
Paused
Rotate the multi selector to advance or rewind the
movie.
Playback controls are displayed at the top of the
monitor.
Press the multi selector Jor Kto select a control. The
4 s
operations described below are available.
During
playback
Volume
indicator
Function Icon
Description
Rewind
Hold down the kbutton to rewind the movie.
Hold down the kbutton to advance the movie.
Press the kbutton to pause playback.
A
B
Advance
The following operations can be performed while playback is paused
using the controls displayed at the top in the monitor.
Press the kbutton to rewind the movie. Hold down the k
button for continuous rewinding.*
C
Pause
End
E
Press the kbutton to advance the movie. Hold down the k
button for continuous advancing.*
D
Press the kbutton to resume playback.
F
Press the kbutton to return to full-frame playback mode.
G
* The movie can also be advanced or rewound by rotating the multi selector.
Adjusting volume
Deleting movies
B Notes About Playing Back Movies
The COOLPIX S6200 is not able to play back movies recorded with another make or model of digital camera.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
General Camera Setup
This chapter describes the various settings that can be adjusted in the z setup
menu.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
2 9 m 0 s
Vibration reduction
7 6 0
Motion detection
AF assist
camera’s menus.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
General Camera Setup
The Setup Menu
The following settings can be changed in the setup
menu by selecting the z tab.
Set up
Welcome screen
Time zone and date
Monitor settings
Print date
Vibration reduction
Motion detection
AF assist
Option
Description
A
Allows you to select the image displayed as the welcome
screen when the camera is turned on. Select COOLPIX to
Welcome screen
picture taken with the camera as the welcome screen. The
welcome screen is not displayed by default.
Allows you to set settings related to the camera’s date and
time. The Time zone setting allows you to specify the time
zone where the camera is mainly used and whether or not
daylight saving time is in effect. When the travel
destination (x) is selected, the camera automatically
Time zone and date
calculates the time difference between the travel
destination and the home time zone (w), and saves
images using the date and time of the travel destination.
Allows you to adjust settings related to the monitor.
•
Photo info allows you to select the kind of information
that is displayed during shooting mode and playback
mode. If you select Framing grid+auto info, a grid is
displayed when shooting to help you frame the shot.
The Image review setting allows you to determine
whether or not the captured image is displayed
immediately after shooting.
Monitor settings
•
•
Brightness allows you to adjust the brightness of the
monitor.
Allows you to imprint the shooting date and time on
images at the time of shooting. The default setting is Off.
The shooting date and time are not imprinted on
panorama images or movies.
Print date
•
Allows you to reduce blurring caused by camera shake
when shooting. The default setting is Off.
Vibration reduction
•
When using a tripod to stabilize the camera during
shooting, set this feature to Off to prevent this feature
from malfunctioning.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Option
Description
A
When set to Auto (default setting), if the camera detects
camera shake or subject movement at the time of
shooting, it automatically increases ISO sensitivity and
shutter speed to reduce blurring. The r indicator glows
green when the camera detects camera shake and
increases shutter speed.
Motion detection
•
When using certain shooting modes or settings, motion
is not detected. In these cases the r indicator is not
displayed.
When set to Auto (default setting), the AF-assist
surroundings to help the camera focus.
•
The illuminator has a range of about 1.9 m (6 ft 2 in.) at
7 in.) at the maximum telephoto position.
AF assist
•
Even if Auto is selected, the AF-assist illuminator may
not light depending on the position of the focus area or
the scene mode that is selected.
When set to On (default setting), if you rotate the zoom
control to g(i) when the camera is already zoomed in to
the maximum optical zoom position, the digital zoom is
Digital zoom
Allows you to turn various camera sounds on and off.
Sound settings
Auto off
•
Camera operation sounds are not heard when using
certain modes, such as the Pet portrait scene mode.
Allows you to set the amount of time that passes before the
monitor turns off to save power. The default setting is 1 min.
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
Format memory/
Format card
•
All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to save important images
by transferring them to a computer before formatting.
Language
TV settings
Allows you to change the camera’s display language.
Set these settings to match your TV. You can select the
video output mode (NTSC or PAL) and adjust HDMI
output settings.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Option
Description
A
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a computer
(provided that the computer is able to supply power).
•
When charging by computer, it may take more time to
charge the battery than when using the Charging AC
Adapter EH-69P. Additionally, when charging by
computer and transferring images to the computer, it
takes more time to charge the battery.
Charge by computer
Immediately after taking a picture using face detection
camera detects a subject with closed eyes, the camera
displays the message Did someone blink?, allowing you
to check the image. The default setting is Off.
Blink warning
Filmstrip
When On is selected, thumbnails of previous and
subsequent images are displayed in the bottom of the
monitor when you rotate the multi selector quickly while
The default setting is Off.
Allows you to reset the camera’s settings to their default
values.
Reset all
•
Certain settings such as Time zone and date and
Language are not reset.
Firmware version
View the current camera firmware version.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
E
Reference Section
The Reference Section provides detailed information and hints about using the
camera.
Shooting
Using Panorama Assist ............................................................................................. E2
Playback
Favorite Pictures Mode............................................................................................. E4
Auto Sort Mode........................................................................................................... E7
List by Date Mode ...................................................................................................... E9
Editing Still Images ..................................................................................................E10
Menu
The Smart Portrait Menu........................................................................................E38
The Subject Tracking Menu ..................................................................................E40
The Playback Menu..................................................................................................E41
The Movie Menu .......................................................................................................E52
The Setup Menu........................................................................................................E54
Additional Information
File and Folder Names ............................................................................................E77
Optional Accessories...............................................................................................E78
Error Messages ..........................................................................................................E79
E1
Download from Www.Somanuals.com. All Manuals Search And Download.
Reference Section
Using Panorama Assist
The camera focuses on the subject in the center of the frame. Use a tripod for the
using a tripod to stabilize the camera.
1
2
Press the A button in shooting
mode and use the multi selector
to select p (Panorama assist)
•
Panorama direction icons are displayed
to show the direction in which images
will be joined.
Panorama assist
Use the multi selector to select the direction
and press the kbutton.
•
Select the direction in which images will be joined in
the completed panorama; right (I), left (J), up (K), or
down (L).
2 9 m 0 s
7 6 0
•
The yellow panorama direction icon (II) is displayed
for the current direction and the direction is fixed when
the kbutton is pressed. The icon changes to the white fixed direction I icon.
•
•
Press the kbutton again to select a different direction.
3
4
Frame the first portion of the
panorama scene and take the first
picture.
•
One third of the image will be displayed as
translucent.
1 / 2 5 0
F 3.2
Take the next picture.
•
Frame the next image so that one third of
the frame overlaps the first image, and
press the shutter-release button.
2 9 m 0 s
7 5 9
•
Repeat this process until the necessary
number of images has been taken to
complete the scene.
End
E2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Panorama Assist
5
Press the kbutton when shooting is
complete.
•
The camera returns to step 2.
2 9 m 0 s
End
7 5 7
B Notes About Panorama Assist
• Flash mode, self-timer, macro mode, and exposure compensation settings cannot be adjusted
after the first picture is taken. Images cannot be deleted, nor can zoom or Image mode settings
mode during shooting. Setting the time allowed to elapse before the auto off function is enabled
to a longer setting is recommended.
C R Indicator
In Panorama assist scene mode, exposure, white balance, and
focus for all images in a panorama are fixed at the values for the first
image in each series.
When the first picture is taken, R is displayed to indicate
that exposure, white balance, and focus are locked.
2 9 m 0 s
End
7 5 9
C Combining Images to Make a Panorama
panorama.
• Install Panorama Maker 5 from the included ViewNX 2 Installer CD-ROM.
• After installing Panorama Maker 5, start the software as explained below.
Windows: Select the Start menu > All Programs > ArcSoft Panorama Maker 5 > Panorama
Maker 5
Mac OS X: Open the Applications folder > double-click Panorama Maker 5
• For more information about using Panorama Maker 5, refer to the on-screen instructions and help
information contained in Panorama Maker 5.
C More Information
E3
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Pictures Mode
After shooting, you can add your favorite still images to albums; there are nine
albums available. After you add images to an album, you can use favorite picture
mode to view those images easily.
• By creating albums for certain subjects or events, you can find your favorite
images easily.
• The same image can be added to multiple albums.
• Up to 200 images can be added to each album.
Adding Images to Albums
1
Find the image you want to add and display it
then press the kbutton.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
•
Images cannot be added to albums while using
favorite pictures mode.
4 /
4
2
Use the multi selector to select the desired
album and press the kbutton.
Fa v o r i t e p i c t u r e s
Back
A d d
E4
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Pictures Mode
Playing Back Images in Albums
If you select h Favorite pictures mode when
selection screen is displayed.
Favorite pictures
Use the multi selector to select an album and then
press the kbutton to play back the images that have
been added to the selected album.
Choose icon
• The following operations are available from the
album selection screen.
- lbutton: Deletes all images in the selected album.
• When viewing images in full-frame playback mode or thumbnail playback
mode, press the dbutton to display the menu and then select the h
Removing Images from Albums
Press the kbutton in full-frame playback mode in
favorite pictures mode to remove the image. A
confirmation screen is displayed. Select Yes and press
Remove selected picture or
pictures from favorites?
the kbutton to remove the image.
Yes
No
B Notes About Deletion
When images are added to an album, they are not moved or copied to the album. Only the image
file names are added to the album. During playback, images are retrieved according to their file
names.
If an image is deleted while using favorite pictures mode, the image will not only be removed from
the album, but the corresponding image file will also be permanently deleted from the internal
memory or the memory card.
E5
Download from Www.Somanuals.com. All Manuals Search And Download.
Favorite Pictures Mode
Changing the Favorites Album Icon
button to change the album’s icon.
• Select a color, press the kbutton, and then select
an icon and press the kbutton to change the icon.
Choose icon
Back
B Notes About Album Icons
• Set the album icons separately for the internal memory and for the memory card.
• To change the album icons for the internal memory, first remove the memory card from the
camera.
• The default setting for the icon is the number icon (black).
E6
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Sort Mode
Images are automatically sorted in to categories, such
as portraits, landscapes, and movies.
Portraits
If you select F Auto sort mode when changing the
is displayed.
Other scenes
Use the multi selector to select a category and then
press the kbutton to play back the images in the
selected category.
Auto Sort Mode Categories
Option
Description
timer setting set to On
Z Smile
Images captured in Portrait*, Night portrait*, Party/indoor,
timer setting set to Off
D
Portrait
Food
u
U Landscape
Images captured in Night landscape*, Sunset, Dusk/dawn,
V Dusk to dawn
D Close-up
O Pet portrait
D Movie
X Retouched copies
All other images that cannot be defined by the categories
described above
W Other scenes
appropriate categories.
• The following operations are available while the category selection screen is
displayed.
- lbutton: Deletes all images in the selected category.
• When viewing images in full-frame playback mode or thumbnail playback
mode, press the dbutton to display the menu and then select the F (auto
E7
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Sort Mode
B Notes About Auto Sort Mode
• Up to 999 images and movie files can be sorted to each category in auto sort mode. If 999 images
or movies have already been sorted to a specific category, new images and movies cannot be
sorted to that category nor can they be displayed in auto sort mode. You can play back images
played back in auto sort mode.
• Images or movies saved by a camera other than the COOLPIX S6200 cannot be played back in
auto sort mode.
E8
Download from Www.Somanuals.com. All Manuals Search And Download.
List by Date Mode
If you select C List by date mode when changing the
screen is displayed.
Use the multi selector to select a date and then press
the kbutton to play back the images captured on the
selected date.
List by date
2 0 / 1 1 / 2 0 1 1
3
2
1 5 / 1 1 / 2 0 1 1
1 0 / 1 1 / 2 0 1 1
0 5 / 1 1 / 2 0 1 1
1
1 0
• The first image that was captured on the selected
date is displayed.
• The following operations are available while the shooting date selection screen
is displayed.
- dbutton: When you select the C tab (list by date menu) from the menu,
and apply it to all images captured on the selected date.
➝ print order, slide show, protect
- lbutton: Deletes all images captured on the selected date.
• When viewing images in full-frame playback mode or thumbnail playback
mode, press the dbutton to display the menu and then select the C (list by
B Notes About List by Date Mode
• Up to 29 dates can be displayed. If images exist for more than 29 dates, all images saved earlier
than most recent 29 dates will be combined under Others.
• The 9,000 most recent images can be displayed in list by date mode.
• Images captured when the camera’s date is not set are treated as images captured on January 1,
2011.
E9
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
Editing Features
Use the COOLPIX S6200 to edit images in-camera and save them as separate files
Editing function
Description
Easily create retouched copies in which contrast and saturation
have been enhanced.
Create a copy of the current image with enhanced brightness
and contrast, brightening dark portions of the image.
Make facial skin tones softer.
Digital filter effects can be used to apply a variety of effects to
images. Effect types include Soft, Selective color, Cross
screen, Fisheye, Miniature effect, and Painting.
Create a small copy of images suitable for use as e-mail
attachments.
Crop a portion of the image. Use to zoom in on a subject or
arrange a composition.
B Notes About Image Editing
• This camera cannot edit images captured with another make or model of digital camera.
• If no face is detected in an image, a copy cannot be created using the skin softening function (E14).
• Edited copies created with this camera may not be displayed properly on another make or model
of digital camera. It may also be impossible to transfer them to a computer using another make or
model of digital camera.
• Editing functions are not available when there is not enough free space in the internal memory or
on the memory card.
E10
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
C Restrictions on Image Editing
When an edited copy is further modified with another editing function, check the following
restrictions.
Editing function used
Editing functions that can be added
Quick retouch
D-Lighting
Filter effects
The skin softening, small picture, or crop function can be added.
The quick retouch, D-Lighting, and filter effects functions cannot be
used together.
The quick retouch, D-Lighting, filter effects, small picture, or crop
function can be added.
Skin softening
Small picture
Crop
Another editing function cannot be added.
• Copies created with editing functions cannot be further edited with the same function used to
create them.
• When combining the small picture or crop function and another editing function, use the small
picture and crop functions after other editing functions have been applied.
C Original and Edited Images
• Copies created with editing functions are not deleted if the original images are deleted. The
original images are not deleted if copies created with editing functions are deleted.
• Edited copies are saved with the same shooting date and time as the original.
E11
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
k Quick Retouch: Enhancing Contrast and Saturation
Quick retouch can be used to easily create retouched copies in which contrast and
saturation have been enhanced. Copies created with the quick retouch function
are saved as separate files.
1
Display the desired image in full-frame
button.
2
Use the multi selector to select k Quick
Playback menu
Quick retouch
retouch and press the kbutton.
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
•
The original version is displayed on the left and the
edited version is displayed on the right.
3
Press the multi selector Hor Ito select the
amount of effect applied and press the k
button.
Quick retouch
•
A new, edited copy is created.
•
To exit without saving the copy, press J.
Normal
Amount
•
Copies created with the quick retouch function are
indicated by the s icon displayed during playback.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
4 /
4
C More Information
E12
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
I D-Lighting: Enhancing Brightness and Contrast
D-Lighting can be used to create copies with enhanced brightness and contrast,
brightening dark portions of an image. Enhanced copies are saved as separate
files.
1
Display the desired image in full-frame
button.
2
Use the multi selector to select I D-Lighting
Playback menu
Quick retouch
and press the kbutton.
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
•
The original version is displayed on the left and the
edited version is displayed on the right.
3
Select OK and press the kbutton.
D - L i g h t i n g
•
A new, edited copy is created.
•
To exit without saving the copy, select Cancel and
press the kbutton.
OK
Cancel
•
Copies created with the D-Lighting function are
indicated by the c icon displayed during playback.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
4 /
4
C More Information
E13
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
e Skin Softening: Softening Skin Tones
The camera detects faces in images and creates a copy with softer facial skin tones.
Copies created using the skin softening function are saved as separate files.
1
2
Display the desired image in full-frame
button.
Use the multi selector to select e Skin
softening and press the kbutton.
Playback menu
Quick retouch
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
•
The screen for selecting the degree of softening is
displayed.
•
If no faces are detected in the image, an alert is
displayed and the camera returns to the playback
menu.
3
4
Press the multi selector Hor Ito select the
degree of softening and press the kbutton.
Skin softening
•
The confirmation dialog is displayed with the face to
which skin softening was applied enlarged at the
center of the monitor.
Normal
Preview
•
To exit without saving the copy, press J.
Amount
Check the preview of the copy.
•
•
•
•
•
Skin tones in up to 12 faces, in the order of that closest
to the center of the frame, are softened.
If more than one face was softened, press the multi
selector Jor Kto display a different face.
Press the dbutton to adjust the degree of softening.
The monitor display returns to that shown in step 3.
When the kbutton is pressed, a new, edited copy is
created.
Back
Save
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
Copies created with the skin softening function are
indicated by the E icon displayed during playback.
4 /
4
E14
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
B Notes About Skin Softening
Depending upon the direction in which faces are looking, or the brightness of faces, the camera may
be unable to accurately recognize faces, or the skin softening function may not perform as expected.
C More Information
E15
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
p Filter Effects: Applying Digital Filter Effects
Digital filter effects can be used to apply a variety of effects to images. The
following effects are available. Copies created with the filter effects function are
saved as separate files.
Type
Description
Soften the image by adding a slight blur around the center of the
Soft
Keep one specified color in the image, and change the other colors to
black and white.
Selective color
Cross screen
Fisheye
Produce star-like rays of light that radiate outward from bright objects
such as sunlight reflections or street lights. This effect is suitable for
night scenes.
Make an image look as if it were captured with a fisheye lens. This
effect is well-suited for images captured in macro mode.
Make an image look like a miniature scene captured in macro mode.
This effect is well-suited for images captured from a high vantage
point with the main subject at the center of the image.
Miniature effect
Painting
Gives images a hand-painted appearance.
1
Display the desired image in full-frame
d
2
Use the multi selector to select p Filter
effects and press the kbutton.
Playback menu
Quick retouch
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
3
Press the multi selector Hor Ito select an
effect, and press the kbutton.
Filter effects
Soft
Selective color
Cross screen
Fisheye
•
When Cross screen, Fisheye, Miniature effect, or
Painting is selected, proceed to step 5.
Miniature effect
Painting
E16
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
4
Adjust the effect.
•
Soft: Press Hor Ito select the range of the effect
Soft
and press the kbutton.
Normal
Extent
•
Selective color: The slider is displayed. Rotate the
multi selector, or press Hor Ito select the color to
be retained, and press the kbutton.
Selective color
Slider
•
Press Jto return to the Filter effects selection screen
without applying effects.
5
Confirm the effect and press the kbutton.
Preview
•
A new, edited copy is created.
•
To exit without saving the copy, press J.
Back
Save
•
Copies created using the filter effects function are
indicated by the c icon displayed during playback.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
4 /
4
C More Information
E17
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
g Small Picture: Reducing the Size of an Image
Create a small copy of the current image. This feature is useful for creating copies
for display on Web pages or for e-mail attachments. The 640×480, 320×240, and
160×120 sizes are available. Small copies are saved as separate files with a
compression ratio of approximately 1:16.
1
Display the desired image in full-frame
button.
2
Use the multi selector to select g Small
picture and press the kbutton.
Playback menu
Rotate image
Small picture
Voice memo
Copy
3
4
Select the desired copy size and press the k
button.
Small picture
640 × 480
320 × 240
160 × 120
Select Yes and press the kbutton.
Create small picture file?
•
A new, small copy is created.
•
To exit without saving the copy, select No and press
the kbutton.
•
The copy is displayed with a black frame.
Yes
No
C More Information
E18
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
a Crop: Creating a Cropped Copy
Create a copy containing only the portion visible in the monitor when u is
separate files.
1
Rotate the zoom control to g(i) in full-frame
image.
•
To crop an image displayed in “tall” (portrait)
orientation, zoom in on the image until the black bars
displayed on the both sides of the monitor disappear.
The cropped image will be displayed in landscape orientation. To crop the image in its
the image so that it is displayed in landscape orientation. Next, enlarge the image for
cropping, crop the image, and then rotate the cropped image back to “tall” (portrait)
orientation.
2
Refine copy composition.
•
Rotate the zoom control to g(i) or f(h) to adjust
the zoom ratio.
•
Press the multi selector H, I, J, or Kto scroll the
image so that only the portion to be copied is visible in
the monitor.
3
4
Press the dbutton.
Use the multi selector to select Yes and press
the kbutton.
Save this image as
displayed?
•
A cropped copy is created.
•
To exit without saving the copy, select No and press
the kbutton.
Yes
No
E19
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Still Images
C Image Size
As the area to be saved is reduced, the image size (pixels) of the cropped copy is also reduced.
When the image size of the cropped copy is 320 × 240 or 160 × 120, a black frame is displayed around
the image, and the small picture icon A is displayed in the left of the monitor in playback mode.
C More Information
E20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV (Viewing Images on a TV)
Connect the camera to a TV to play back images or movies back on the TV. If your
TV is equipped with an HDMI jack, a commercially available HDMI cable can be
used to connect the camera to the TV.
1
Turn off the camera.
2
Connect the camera to the TV.
When using the included audio/video cable
Connect the yellow plug to the video-in jack and the white and red plugs to the audio-in
jacks on the TV.
Yellow
White
Red
When using a commercially available HDMI cable
Connect the plug to the HDMI jack on the TV.
HDMI mini connector (Type C)
to HDMI jack
E21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a TV (Viewing Images on a TV)
3
4
Set the TV’s input to external video input.
•
See the documentation provided with your TV for details.
Hold down the cbutton to turn on the
camera.
•
The camera enters playback mode and images are
displayed on the TV.
•
While connected to the TV, the camera monitor will
remain off.
B Notes About Connecting the HDMI Cable
• An HDMI cable is not included. Use a commercially available HDMI cable to connect the camera to
a high-definition TV. The output terminal on this camera is an HDMI mini connector (type C). When
purchasing an HDMI cable, be sure that the device end of the cable is an HDMI mini connector.
B Notes About Connecting the Cable
• When connecting the cable, be sure that the camera connector is properly oriented. Do not use
force when connecting the cable to the camera. When disconnecting the cable, do not pull the
connector at an angle.
• Do not connect cables to the HDMI mini connector (Type C) and to the USB/audio/video output
connector simultaneously.
B If the Images Are Not Displayed on the TV
conforms to the standard used by your TV.
C Using a TV Remote Control (HDMI Device Control)
The remote control of an HDMI-CEC-compatible TV can be used to control playback.
It can be used instead of the camera’s multi selector and zoom control to select images, start and
pause movie playback, and switch between full-screen playback mode and 4-image thumbnail
display.
connect the camera and TV using an HDMI cable.
• Aim the remote control at the TV when operating it.
• Refer to the TV’s operating instructions for information about the TV’s HDMI-CEC compatibility.
E22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
the printer and print images without using a computer.
Follow the procedures below to print images.
Take pictures
Select images for printing and
number of copies using
Print images one at a
When printing is complete, turn the camera off and disconnect the USB cable
B Notes About Power Source
• When connecting the camera to a printer, use a fully charged battery to prevent the camera from
turning off unexpectedly.
• If the AC Adapter EH-62F (available separately) is used, COOLPIX S6200 can be powered from an
electrical outlet. Do not use any other make or model of AC adapter as it may cause the camera to
heat up or malfunction.
C Printing Images
In addition to printing images transferred to a computer from your personal printer and printing
over a direct camera-to-printer connection, the following options are also available for printing
images saved on the memory card:
• Inserting a memory card into a DPOF-compatible printer’s card slot
• Taking a memory card to a digital photo lab
For printing using these methods, specify the images and the number of prints each to the memory
E23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
Connecting the Camera to a Printer
1
Turn off the camera.
2
3
Turn on the printer.
•
Check printer settings.
Connect the camera to the printer using the included USB cable.
•
Be sure that connectors are properly oriented. Do not attempt to insert connectors at
an angle, and do not use force when connecting or disconnecting the USB cable.
4
The camera is automatically turned on.
•
When properly connected, the PictBridge startup
screen ( ) will be displayed in the camera monitor,
1
followed by the Print selection screen ( ).
2
1
2
Print selection
1 5 / 1 1
2 0 1 1
N O . 3 2
3 2
E24
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
B If the PictBridge Startup Screen Is not Displayed
the camera’s setup menu to Off and reconnect the cable.
E25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
Printing Individual Images
procedures described below to print an image.
1
2
3
4
5
Use the multi selector to select the desired
image and press the kbutton.
Print selection
1 5 / 1 1
2 0 1 1
•
Rotate the zoom control to f(h) to display 12
thumbnails, and g(i) to switch back to full-frame
playback.
N O . 3 2
3 2
Select Copies and press the kbutton.
PictBridge
0 0 0 prints
Start print
Copies
Paper size
Select the desired number of copies (up to
nine) and press the kbutton.
Copies
4
Select Paper size and press the kbutton.
PictBridge
0 0 4 prints
Start print
Copies
Paper size
Select the desired paper size and press the k
button.
Paper size
Default
3.5×5 in.
5×7 in.
•
To specify paper size using settings on the printer,
Postcard
100×150 mm
4×6 in.
select Default in the paper size option.
8×10 in.
E26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
6
7
Select Start print and press the kbutton.
PictBridge
0 0 4 prints
Start print
Copies
Paper size
Printing begins.
•
Monitor display returns to the print selection screen
shown in step 1 when printing is complete.
Printing
•
To cancel printing before all copies have been printed,
press the kbutton.
002
/
004
Cancel
Current number of copies/
total number of copies
Printing Multiple Images
procedures described below to print multiple images.
1
2
When the Print selection screen is displayed,
press the dbutton.
•
The Print menu screen is displayed.
Use the multi selector to select Paper size
and press the kbutton.
Print menu
Print selection
Print all images
DPOF printing
Paper size
•
To exit the print menu, press the dbutton.
3
Select the desired paper size and press the k
button.
Paper size
Default
3.5×5 in.
5×7 in.
•
To specify paper size using settings on the printer,
Postcard
100×150 mm
4×6 in.
select Default in the paper size option.
8×10 in.
E27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
4
Select Print selection, Print all images, or
DPOF printing and press the kbutton.
Print menu
Print selection
Print all images
DPOF printing
Paper size
Print selection
Select images (up to 99) and the number of
copies (up to nine) of each.
Print selection
1 0
•
Rotate the multi selector, or press Jor Kto
select images, and press Hor Ito specify
the number of copies to be printed.
1
1
3
•
Images selected for printing are indicated by
the check mark (y) and the numeral
indicating the number of copies to be
printed. If no copies have been specified for
images, the selection is canceled.
Back
•
Rotate the zoom control to g(i) to switch back to full-frame playback or f
(h) to display 12 thumbnails.
•
•
Press the kbutton when setting is complete.
When the screen shown on the right is
displayed, select Start print and press the k
button to start printing.
Print selection
0 1 0 prints
Select Cancel and press the kbutton to
return to the print menu.
Start print
Cancel
Print all images
One copy each of all images saved in the
Print all images
internal memory, or on the memory card, is
printed.
0 1 8 prints
•
When the screen shown on the right is
displayed, select Start print and press the k
button to start print. Select Cancel and press
the kbutton to return to the print menu.
Start print
Cancel
E28
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the Camera to a Printer (Direct Print)
DPOF printing
Print images for which a print order was created
DPOF printing
•
When the screen shown on the right is
displayed, select Start print and press the k
button to start printing. Select Cancel and
press the kbutton to return to the print
menu.
0 1 0 prints
Start print
View images
Cancel
•
To view the current print order, select View
images and press the kbutton. To print
images, press the kbutton again.
View images
1 0
Back
5
Printing begins.
•
Monitor display returns to the print menu shown in
step 2 when printing is complete.
Printing
•
To cancel printing before all copies have been printed,
press the kbutton.
002
/
010
Cancel
Current number of copies/
total number of copies
C Paper Size
The camera supports the following paper sizes: Default (the default paper size for the printer
connected to the camera), 3.5×5 in., 5×7 in., 100×150 mm, 4×6 in., 8×10 in., Letter, A3, and A4.
Only sizes supported by the printer will be displayed.
E29
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Image mode.
White Balance (Adjusting Hue)
Select A (auto) mode Mdbutton MA tab MWhite balance
The color of light reflected from an object varies with the color of the light source.
The human brain is able to adapt to changes in the color of the light source, with
the result that white objects appear white whether seen in the shade, direct
sunlight, or under incandescent lighting. Digital cameras can mimic this
adjustment by processing images according to the color of the light source. This is
known as “white balance.” For natural colors, select a white balance setting that
matches the light source before shooting.
Although Auto (the default setting) can be used under most types of lighting,
white balance can be adjusted to suit the sky conditions or light source and
achieve more natural color tones in the image.
Option
Description
a Auto
(default setting)
White balance is automatically adjusted to suit lighting
conditions. Best choice in most situations.
Useful when shooting under unusual lighting. See “Using Preset
b Preset manual
c Daylight
d Incandescent
e Fluorescent
f Cloudy
White balance adjusted for direct sunlight.
Use under incandescent lighting.
Use under fluorescent lighting.
Use when taking pictures under overcast skies.
Use with the flash.
g Flash
No icon is displayed when Auto is selected.
B Notes About White Balance
• Set the flash to W (off) when white balance is set to any setting other than Auto and Flash
E30
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Using Preset Manual
Preset manual is used with mixed lighting or to compensate for light sources with a
strong color cast when the desired effect has not been achieved with white balance
settings like Auto and Incandescent (for example, to make images shot under a
lamp with a red shade look as though they had been shot under white light).
Use the procedure below to measure the white balance value under the lighting
used during shooting.
1
2
Place a white or gray reference object under the lighting that will be
used during shooting.
White balance
the multi selector to select b Preset manual
in the White balance menu, and press the k
button.
Auto
Preset manual
Daylight
Incandeescent
Fluoreescennt
Cloudy
•
The camera zooms in to the position for measuring
white balance.
Flash
3
4
Select Measure.
Preset manual
•
To apply the most recently measured white balance
value, select Cancel and press the kbutton. The
white balance setting will not be measured again and
the most recently measured value will be set.
Cancel
Measure
Frame the reference object in the measuring
window.
Preset manual
Cancel
Measure
Measuring window
5
Press the kbutton to measure a value for preset manual.
•
The shutter is released and the new white-balance value is set. No image is saved.
B Notes About Preset Manual
A value for flash lighting cannot be measured with Preset manual. When shooting using the flash,
set White balance to Auto or Flash.
E31
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Continuous Shooting
Select A (auto) mode Mdbutton MA tab MContinuous
Change settings to continuous or BSS (best shot selector).
Option
Description
U Single
(default setting)
One picture is taken each time the shutter-release button is
pressed.
While the shutter-release button is held all the way down, up to
six pictures are taken at a rate of about 1.2 frames per second
(fps) (when Image mode is set to P 4608×3456).
V Continuous
The “best shot selector” is recommended when shooting with
the flash off or the camera zoomed in, or in other situations in
which inadvertent motion can result in blurred images. When
BSS is on, the camera takes up to ten pictures while the shutter-
release button is held down. The sharpest image in the series is
automatically selected and saved.
D BSS
(best shot selector)
•
BSS is best suited to shooting subjects that are not moving.
When shooting moving subjects or when the composition of
the picture changes while shooting, the desired results may
not be achieved.
Each time the shutter-release button is
pressed, the camera takes 16 shots at a
rate of about 30 fps and arranges them in
a single image.
W Multi-shot 16
•
Image mode is fixed at L (image size:
2560 × 1920 pixels).
•
Digital zoom cannot be used.
The current continuous shooting setting is indicated by an icon when shooting
B Notes About Continuous Shooting
• When Continuous, BSS, or Multi-shot 16 is selected, flash cannot be used. Focus, exposure, and
white balance are fixed at the values determined with the first image in each series.
• The frame rate with continuous shooting may vary depending upon the current image mode
setting, the memory card used, or shooting condition.
B Notes About Multi-shot 16
images. Avoiding bright objects such as the sun, reflections of the sun, and electric lights when
shooting with Multi-shot 16 enabled is recommended.
E32
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
ISO Sensitivity
Select A (auto) mode Mdbutton MA tab MISO sensitivity
When ISO sensitivity is increased, less light is needed when taking pictures.
Higher ISO sensitivity allows darker subjects to be captured. Additionally, even
with subjects of similar brightness, pictures can be taken at faster shutter speeds,
and blurring caused by camera shake and subject movement can be reduced.
• Although higher ISO sensitivity is effective when shooting darker subjects,
shooting without the flash, shooting while using the zoom, etc., images may
contain noise.
Option
Description
Sensitivity is ISO 80 when there is sufficient lighting; the camera
compensates by raising sensitivity to a maximum of ISO 1600
when lighting is dim.
Auto (default setting)
Select the range in which the camera automatically adjusts ISO
sensitivity, from ISO 80-400 or ISO 80-800. The camera will not
increase sensitivity beyond the maximum value in the selected
range. Set the maximum value for ISO sensitivity for effective
control over the amount of “grain” that appears in images.
Fixed range auto
80, 100, 200, 400, 800,
1600, 3200
Sensitivity is locked at the specified value.
• When Auto is selected, the E icon is not displayed at ISO 80, but is displayed
if the ISO sensitivity automatically increases to more than 80.
• When Fixed range auto is selected, U and the maximum value for ISO
sensitivity is displayed.
B Notes About ISO Sensitivity
than Auto.
E33
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Color Options
Select A (auto) mode Mdbutton MA tab MColor options
Make colors more vivid or save images in monochrome.
Option
Description
n Standard color
(default setting)
Use for images exhibiting natural color.
o Vivid color
p Black-and-white
q Sepia
Use to achieve a vivid, “photoprint” effect.
Save images in black-and-white.
Save images in sepia tones.
r Cyanotype
Save images in cyan-blue monochrome.
When Standard color is selected, no icon is displayed. Color tones shown in the
monitor during shooting change according to the selected color option.
B Notes About Color Options
E34
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
AF Area Mode
Select A (auto) mode Mdbutton MA tab MAF area mode
Use this option to determine how the camera selects the focus area for autofocus.
Option
Description
When the camera detects a human
face, it focuses on that face. See “Using
information.
If more than one face is detected, the
camera focuses on the face closest to
the camera.
When taking pictures of subjects other
than people, or framing a subject with
which no face is detected, the AF area
2 9 m 0 s
7 6 0
a Face priority
(default setting)
Focus area
mode setting switches to Auto, and the camera will automatically
select the focus area (up to nine areas) containing the subject closest
to the camera.
The camera has nine focus areas, and
automatically selects the focus areas
containing the subject closest to the
camera.
Press the shutter-release button
halfway to activate the focus area.
When the shutter-release button is
2 9 m 0 s
w Auto
7 6 0
pressed halfway, the focus areas that
Focus areas
are in focus (up to nine areas) selected
by the camera will be displayed in the
monitor.
Select one of 99 focus areas in the
monitor. This option is suited to
situations in which the intended
subject is relatively still and not
positioned in the center of the frame.
Rotate the multi selector, or press H,
I, J, or Kto move the focus area to
where the subject is, and take a
picture.
Selectable focus area
x Manual
To cancel focus area selection and
adjust flash, macro mode, self-timer,
Focus area
and exposure compensation settings, press the kbutton. To return
to the focus area selection screen, press the kbutton again.
E35
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Option
Description
The camera focuses on the subject in
the center of the frame.
The focus area is always displayed in
the center of the screen.
y Center
2 9 m 0 s
7 6 0
Focus area
B Notes About AF Area Mode
• When digital zoom is in effect, focus will be on the center of the screen regardless of the AF area
mode setting.
E36
Download from Www.Somanuals.com. All Manuals Search And Download.
The Shooting Menu (for A (Auto) Mode)
Autofocus Mode
Select A (auto) mode Mdbutton MA tab MAutofocus mode
Select how the camera focuses when using subject tracking mode.
Option
Description
A Single AF
(default setting)
The camera focuses when the shutter-release button is pressed
halfway.
The camera focuses continuously until the shutter-release
button is pressed down halfway. Use with moving subjects. The
sound of lens drive movement will be heard while the camera
focuses.
B Full-time AF
B Notes About Autofocus Mode
B Autofocus Mode Setting
Autofocus mode can be set independently for both subject tracking mode and A (auto) mode.
C Autofocus Mode for Movie Recording
E37
Download from Www.Somanuals.com. All Manuals Search And Download.
The Smart Portrait Menu
Image mode.
Skin Softening
Select smart portrait mode Mdbutton MF tab MSkin softening
Enable skin softening.
Option
Description
S High
When the shutter is released, the camera detects one or
more human faces (up to three), and processes the image to
soften facial skin tones before saving the image. You can
select the amount of effect that is applied.
R Normal (default setting)
Q Low
k Off
Turns skin softening off.
The current setting can be confirmed by the indicator displayed in the monitor
of skin softening are not visible when framing pictures for shooting. Check the
degree of skin softening performed in playback mode.
Smile Timer
Select smart portrait mode Mdbutton MF tab MSmile timer
The camera detects human faces and then automatically releases the shutter
whenever a smile is detected.
Option
a On (default setting)
k Off
Description
Enables smile timer.
Turns the smile timer off.
icon is displayed when Off is selected.
E38
Download from Www.Somanuals.com. All Manuals Search And Download.
The Smart Portrait Menu
Blink Proof
Select smart portrait mode Mdbutton MF tab MBlink proof
The camera automatically releases the shutter twice each time a picture is taken.
Of the two shots, one in which the subject’s eyes are open is saved.
Option
Description
Enables blink warning.
Flash cannot be used when
On is selected.
If the camera saved an image
in which the subjects eyes
may have been closed, the
dialog shown on the right is
displayed for a few seconds.
A
blink was detected in the
picture just taken.
y On
k Off (default setting)
Turns the blink warning off.
icon is displayed when Off is selected.
E39
Download from Www.Somanuals.com. All Manuals Search And Download.
The Subject Tracking Menu
Image mode.
Autofocus Mode
Select subject tracking mode Mdbutton Ms tab MAutofocus mode
Determines how the camera focuses when using subject tracking mode.
Option
Description
The camera focuses when the shutter-release button is
pressed halfway.
A Single AF
Once a subject is registered for subject tracking, the camera
continuously focuses until the shutter-release button is
pressed halfway to lock the focus. The sound of lens drive
movement can be heard.
B Full-time AF
(default setting)
• Changes made to the autofocus mode setting in this mode will not be applied
to the autofocus mode setting in A (auto) mode.
• The autofocus mode setting applied in subject tracking mode is saved in the
camera’s memory even after the camera is turned off.
Face Priority Tracking
Select subject tracking mode Mdbutton Ms tab MFace priority tracking
Once the camera detects a person’s face, it registers the subject and begins
tracking that person.
Option
Description
Enables face priority tracking.
On (default setting)
Disables face priority tracking.
If a person whom you do not want to track is automatically
registered, or when shooting non-human subjects, select
Off if a person is in the frame.
Off
E40
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
a Print Order (Creating a DPOF Print Order)
Press the cbutton (playback mode) Mdbutton MPlayback menu Ma Print order
When printing images saved on the memory card using any of the following
methods, the Print order option in the playback menu is used to create digital
“print orders” for printing on DPOF-compatible devices.
• Taking the memory card to a digital photo lab.
print order can also be created for images saved in the internal memory if the
memory card is removed from the camera.
1
Use the multi selector to select a Print order
Playback menu
Quick retouch
and press the kbutton.
D-Lighting
Skin softening
Filter effects
Print order
Slide show
Protect
•
Proceed to step 3 when playing back in favorite
pictures mode, auto sort mode or list by date mode.
2
Select Select images and press the k
button.
Print order
Select images
Delete print order
E41
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
3
Select images (up to 99) and the number of
copies (up to nine) of each.
Print selection
1
1
3
•
Rotate the multi selector, or press Jor Kto select
images, and press Hor Ito specify the number of
copies to be printed.
•
Images selected for printing are indicated by the check
mark icon and the numeral indicating the number of
Back
copies to be printed. If no copies have been specified for images, the selection is
canceled.
•
•
Rotate the zoom control to g(i) to switch to full-frame playback. Rotate the zoom
control to f(h) to switch back to 12-thumbnail display.
Press the kbutton when setting is complete.
4
Select whether or not to print shooting date
and shooting information.
Print order
Done
•
Select Date and press the kbutton to print the
shooting date on all images in the print order.
•
Select Info and press the kbutton to print shooting
information (shutter speed and aperture value) on all
images in the print order.
Date
Info
•
Select Done and press the kbutton to complete the print order.
Images selected for printing are indicated by the w
icon during playback.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
4 /
4
E42
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
B Notes About Print Order
When a print order is created in favorite pictures mode, auto sort mode, or list by date mode, the
screen shown below is displayed if images other than those in the selected album, category, or
shooting date have been marked for printing.
• If you select Yes, print order settings for other images are not changed and only the current print
order settings are changed.
• Select No to remove print marking from previously marked images and restrict the print order to
images in the selected category or captured on the selected shooting date.
Print order
Print order
Save print marking for other
images?
Save print marking for other
dates?
Yes
No
Yes
No
Favorite pictures mode or
auto sort mode
List by date mode
If the total number of the images in a print order exceeds 99, the screen shown below will be
displayed.
• Select Yes to remove images previously added from the print order and restrict the print order to
images just marked.
• Select Cancel to remove the images just added from the print order and restrict the print order to
images previously marked.
Print order
Too many images selected.
Remove print marking from
other images?
Print order
Too many images selected.
Remove print marking for
other dates?
Yes
Yes
Cancel
Cancel
Favorite pictures mode or
auto sort mode
List by date mode
E43
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
B Notes About Printing Shooting Date and Shooting Information
When the Date and Info settings are enabled in the print order option, shooting date and shooting
of shooting date and shooting information is used.
• Shooting information cannot be printed when the camera is connected to a DPOF-compatible
printer via the included USB cable.
• Note that Date and Info settings are reset each time the Print order option is displayed.
• The date printed is that saved when the image was captured.
Changing the camera’s date using the Date and time or Time
zone in the Time zone and date option in the setup menu after
an image has been captured has no effect on the date printed on
the image.
15.11.2011
C Canceling Existing Print Order
press the kbutton to remove print marking from all images and cancel the print order.
C Print Date
setup menu, images are saved with shooting date and time imprinted on the image when they are
captured. Images with the date imprinted on them can be printed from printers that do not support
printing of the date on images.
Only the date and time imprinted on images with the print date option will be printed, even if the
Print order date option is enabled.
E44
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
b Slide Show
Press the cbutton (playback mode) Mdbutton MPlayback menu Mb Slide show
Play back images, saved in the internal memory or on a memory card, one by one
in an automated “slide show.”
1
Use the multi selector to select Start and
Slide show
press the kbutton.
Pause
•
To change the interval between images, select Frame
intvl, select the desired interval time, and press the k
button before selecting Start.
Start
3s
Frame intvl
Loop
•
To repeat the slide show automatically, select Loop
and press the kbutton before selecting Start. The
check mark (w) will be added to the loop option when enabled.
2
3
The slide show begins.
•
While the slide show is in progress, press the multi
selector Kto display the next image or Jto display
the previous image. Hold down either button to fast
forward or rewind.
•
To end or pause the slide show, press the kbutton.
End the slide show or restart it.
•
The screen shown on the right is displayed when the
slide show has ended or is paused. Select G and
press the kbutton to return to the playback menu.
Select F to play the slide show again.
B Notes About Slide Show
• Only the first frame of movies included in a slide show is displayed.
E45
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
d Protect
Press the cbutton (playback mode) Mdbutton MPlayback menu Md Protect
Protects selected images from accidental deletion.
Select images to protect or cancel protection for previously protected images
more information.
Note that formatting the camera’s internal memory or the memory card will
E46
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
The Image Selection Screen
When using one of the following features, a screen like
that shown on the right is displayed when selecting
images.
Protect
Back
ON/OFF
Follow the procedures described below to select the images.
1
Rotate the multi selector, or press Jor Kto
select an image.
Protect
•
full-frame playback or f(h) to switch back to 12-
thumbnail display.
•
Only one image can be selected for Rotate image and
Welcome screen. Proceed to step 3.
Back
ON/OFF
2
3
Press Hor Ito select or deselect (or to
specify the number of copies).
Protect
•
When an image is selected, a check mark (y) is
displayed with the image. Repeat steps 1 and 2 to
select additional images.
Back
ON/OFF
Press the kbutton to apply image selection.
•
When Selected images is selected, a confirmation dialog is displayed. Follow the
instructions displayed in the monitor.
E47
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
f Rotate Image
Press the cbutton (playback mode) Mdbutton MPlayback menu M
f Rotate image
Specify the orientation in which saved images are displayed during playback. Still
images can be rotated 90 degrees clockwise or 90 degrees counterclockwise.
Images that were saved in portrait (“tall”) orientation can be rotated up to 180
degrees in either direction.
screen is displayed, rotate the multi selector, or press Jor Kto rotate the image
90 degrees.
Rotate image
Rotate image
Rotate image
Back
Rotate
Back
Rotate
Back
Rotate
Rotate 90 degrees
counterclockwise
Rotate 90 degrees
clockwise
Press the kbutton to finalize display orientation, and save orientation
information with the image.
B Notes on Image Rotation
The camera cannot rotate images captured with another make or model of digital camera.
E48
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
E Voice Memo
Press the cbutton (playback mode) Mselect an image Mdbutton M
Playback menu ME Voice memo
Use the camera’s microphone to record voice memos for images.
When you select an image with a voice memo attached, you can play back the
voice memo.
• If you select an image that has no voice memo, the voice memo recording
screen is displayed; if you select an image that has a voice memo (i.e., an image
indicated by p in full-frame playback mode), the voice memo playback screen
is displayed.
Recording Voice Memos
• Press and hold the kbutton to record a voice
memo (up to 20 seconds).
• Do not touch the microphone during recording.
2 0 s
Back
• During recording, o and p blink in the monitor.
• When recording ends, the voice memo playback
more information.
• Press the multi selector Jbefore or after recording a
voice memo to return to the playback menu. Press
the dbutton to exit the playback menu.
1 7 s
Playing Voice Memos
• Press the kbutton to play the voice memo.
• Press the kbutton again to stop playback.
• Rotate the zoom control to gor fduring playback
to adjust playback volume.
• Press the multi selector Jbefore or after recording a
voice memo to return to the playback menu. Press
the dbutton to exit the playback menu.
2 0 s
Back
E49
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
Deleting Voice Memos
Press the lbutton while the screen described in
“Playing Voice Memos” is displayed.
File will be deleted. OK?
When the confirmation dialog is displayed, select Yes
and press the kbutton. Only the voice memo will be
deleted.
Yes
No
B Notes About Voice Memos
• When an image with a voice memo attached is deleted, both the image and its voice memo are
deleted.
• Voice memos cannot be recorded for an image that already has a voice memo attached to it. The
current voice memo must be deleted before a new voice memo can be recorded.
• This camera cannot record voice memos for images captured with another make or model of
digital camera.
C More Information
E50
Download from Www.Somanuals.com. All Manuals Search And Download.
The Playback Menu
h Copy (Copy Between Internal Memory and Memory Card)
Press the cbutton (playback mode) Mdbutton MPlayback menu Mh Copy
Copy images between the internal memory and a memory card.
1
Use the multi selector to select a destination
option to which images are copied and press
the kbutton.
Copy
• q: Copy images from internal memory to
memory card.
• r: Copy images from memory card to internal
memory.
2
Select a copy option and press the kbutton.
Camera to card
Selected images
All images
•
Selected images: Copy images selected from the
•
All images: Copy all images.
B Notes About Copying Images
•
JPEG-, MOV-, and WAV-format files can be copied. Files saved in any other format cannot be copied.
the images.
• Operation is not guaranteed with images captured with another make of camera or that have
been modified on a computer.
setting is copied.
• Images or movies copied from the internal memory or a memory card cannot be displayed in auto
C If “Memory contains no images.” Is Displayed
If a memory card that contains no images is inserted into the camera, Memory contains no
images. will be displayed when the camera is switched to playback mode. Press the dbutton to
display the copy options screen, and copy the images saved in the camera’s internal memory to the
memory card.
C More Information
E51
Download from Www.Somanuals.com. All Manuals Search And Download.
The Movie Menu
Movie Options
Enter shooting mode Mdbutton Metab MMovie options
Select the desired movie option to record.
Larger image sizes and faster movie bitrates mean greater image quality and larger
movie file sizes.
Option
Description
n HD 720p (1280×720)
(default setting)
Movies with an aspect ratio of 16:9 are recorded.
•
Movie bitrate: 9.1 Mbps
Movies with an aspect ratio of 16:9 are recorded. A format
supported by Apple Inc.
•
Movie bitrate: 20 Mbps
p iFrame 540 (960×540) When recording movies to the internal memory, recording
may stop unexpectedly in some shooting conditions. When
recording movies of important events, recording to a
memory card (class 6 or higher) is recommended.
Movies with an aspect ratio of 4:3 are recorded.
m VGA (640×480)
•
Movie bitrate: 3.1 Mbps
• The movie bitrate is the volume of movie data recorded per second. Variable
bitrate (VBR) encoding is used to automatically adjust the bitrate depending on
the subject being recorded. When recording movies of subjects with large
amounts of motion, the file size increases.
• The frame rate is approximately 30 frames per second for all options.
C More Information
E52
Download from Www.Somanuals.com. All Manuals Search And Download.
The Movie Menu
Autofocus Mode
Enter shooting mode Mdbutton Metab MAutofocus mode
Select how the camera focuses in movie mode.
Option
Description
Focus is locked when the b(emovie-record) button is
pressed to start recording.
Select this option when the distance between the camera and
the subject will remain fairly consistent.
A Single AF
(default setting)
Camera focuses continuously.
Select this option when the distance between the camera and
subject will change significantly during recording. The sound of
the camera focusing may be heard in the recorded movie. Use of
Single AF is recommended to prevent the sound of the camera
focusing from interfering with recording.
B Full-time AF
Wind Noise Reduction
Enter shooting mode Mdbutton Metab MWind noise reduction
Allows you to reduce wind noise during movie recording.
Option
Description
Reduces the sound heard when wind passes over the
microphone. Use when recording movies in locations with
strong winds. Other sounds may become difficult to hear during
playback.
Y On
k Off
(default setting)
Wind noise reduction is not enabled.
The current wind noise reduction setting is indicated by an icon when shooting
E53
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Welcome Screen
dbutton Mz tab MWelcome screen
Select whether or not a welcome screen is displayed when the camera is turned
on.
Option
Description
None
(default setting)
The camera enters shooting or playback mode without
displaying the welcome screen.
The camera displays a welcome screen and enters shooting or
playback mode.
COOLPIX
Displays an image selected for the welcome screen. When the
press the kbutton.
•
As the selected image is saved by the camera, it will be
displayed when the camera is turned on even if the original
image is deleted.
Select an image
•
4608×2592, and copies created at a size of 320 × 240 or
function, cannot be selected.
E54
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Time Zone and Date
dbutton Mz tab MTime zone and date
Set the camera clock.
Option
Description
Set camera clock to current date and
time.
Date and time
Use the multi selector to set the date and
time in the date screen.
D
M
0 1
Y
2 0 1 1
0 1
•
•
•
Select an item: Press Kor J(changes
between D, M, Y, hour, minute).
Edit the highlighted item: Rotate the
multi selector, or press Hor I.
Apply the setting: Select the minute
setting and press the kbutton.
0 0
0 0
Date and time
Edit
The available date formats are Year/Month/Day, Month/Day/Year,
Date format
Time zone
and Day/Month/Year.
w Home time zone can be specified and daylight saving time can be
enabled or disabled. When the travel destination (x) is selected, the
time zone (w) is automatically calculated and the date and time in the
selected region are saved. This can be useful when travelling.
Selecting the Travel Destination Time Zone
1
Use the multi selector to select Time zone
and press the kbutton.
Time zone and date
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
•
The Time zone screen is displayed.
L o n d o n , C a s a b l a n c a
Date and time
Date format
Time zone
2
Select x Travel destination and press the k
Time zone
button.
L o n d o n , C a s a b l a n c a
•
The date and time displayed in the monitor changes
according to the region currently selected.
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
Home time zone
Travel destination
E55
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
3
Press K.
Time zone
•
The travel destination screen is displayed.
L o n d o n , C a s a b l a n c a
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
Home time zone
Travel destination
4
Press Jor Kto select the travel destination
time zone.
1 1 : 3 0
– 0 4 : 0 0
E DT:
N e w Yo r k
To r o n t o
L i m a
•
If daylight saving time is in effect, press Hto enable
daylight saving time function. W is displayed at the top
of the monitor and the camera clock is advanced one
hour. Press Ito disable the daylight saving time
function.
Back
Time zone
•
•
Press the kbutton to apply the travel destination time
zone.
While the travel destination time zone is selected, the
Z icon will be displayed in the monitor when the
camera is in shooting mode.
E DT: N e w Yo r k
To r o n t o, L i m a
1 5 / 1 1 / 2 0 1 1 1 1 : 3 0
Home time zone
Travel destination
C w Home Time Zone
• To switch to the home time zone, select w Home time zone in step 2 and press the kbutton.
• To change the home time zone, select w Home time zone in step 2, and complete steps 3 and 4.
C Daylight Saving Time
When daylight saving time starts or ends, turn the daylight saving time function on or off from the
time zone selection screen displayed in step 4.
C Imprinting Date on Images
have been set. When the Print date option is enabled, images will be saved with shooting date
imprinted on them.
E56
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
C Time Zones
The camera supports the time zones listed below.
For time zones not listed below, set the camera clock to local time from the Date and time option.
UTC +/–
–11
Location
Midway, Samoa
UTC +/–
+1
Location
Madrid, Paris, Berlin
–10
Hawaii, Tahiti
+2
Athens, Helsinki, Ankara
Moscow, Nairobi, Riyadh,
Kuwait, Manama
–9
Alaska, Anchorage
+3
PST (PDT): Los Angeles, Seattle,
Vancouver
–8
–7
–6
+4
+5
Abu Dhabi, Dubai
Islamabad, Karachi
New Delhi
MST (MDT): Denver, Phoenix
CST (CDT): Chicago, Houston,
Mexico City
+5.5
EST (EDT): New York, Toronto,
Lima
–5
+6
Colombo, Dhaka
–4.5
–4
–3
–2
–1
0
Caracas
+7
+8
Bangkok, Jakarta
Beijing, Hong Kong, Singapore
Tokyo, Seoul
Manaus
Buenos Aires, Sao Paulo
Fernando de Noronha
Azores
+9
+10
+11
+12
Sydney, Guam
New Caledonia
London, Casablanca
Auckland, Fiji
E57
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Monitor Settings
dbutton Mz tab MMonitor settings
Set the options below.
Option
Description
Select information displayed in the monitor during shooting and
Photo info
This setting determines whether or not the captured image is displayed
immediately after shooting. The default setting is On.
Image review
Brightness
Select from five settings for monitor brightness. The default setting is 3.
E58
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Photo Info
Select whether or not the photo information is displayed in the monitor.
Shooting mode
Playback mode
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
Show info
Auto info
2 9 m 0 s
7 6 0
4 /
4
Current settings and operational guides are displayed as in Show info above.
If no operations are performed for a few seconds, the display changes to
(default setting) that with Hide info. Information will be displayed again when the next
operation is performed.
Hide info
1 5 / 1 1 / 2 0 1 1 1 5 : 3 0
0 0 0 4 . J P G
2 9 m 0 s
Framing
grid+auto info
7 6 0
4 /
4
In addition to information shown with Auto The current settings or
info above, a framing grid is displayed to operation guide is
help frame pictures. It is not displayed when displayed, as in Auto
recording movies.
info above.
The current settings or
operation guide is
displayed, as in Auto
info above.
2 9 m 0 s
7 6 0
Movie
frame+auto info
In addition to information shown with Auto
info above, a frame is displayed before
recording begins that represents the area
that will be captured when recording movies.
It is not displayed when recording movies.
E59
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Print Date (Imprinting Date and Time)
dbutton Mz tab MPrint date
Allows you to imprint the shooting date and time on
images at the time of shooting. Because this feature
imprints the shooting date and time permanently in
images, this feature also allows you to include the
shooting date and time when printing images, even if
your printer does not support the printing of dates on
15.11.2011
Option
Description
f Date
Date is imprinted on images.
S Date and time
Date and time are imprinted on images.
k Off
(default setting)
Date and time are not imprinted on images.
icon is displayed when Off is selected.
B Notes About Print Date
• Imprinted dates form a permanent part of image data and cannot be deleted. The date and time
cannot be imprinted on images after they have been captured.
• The date cannot be imprinted in the following situations:
- Images captured in Panorama assist scene mode
- Movies
Select an Image mode setting of N 1024×768 or larger when using print date.
• The date is saved using the format selected in the setup menu’s Time zone and date item
C Print Date and Print Order
When printing with a DPOF-compatible printer that can print the shooting date and shooting
the Print date function was set to Off at the time of shooting.
E60
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Vibration Reduction
dbutton Mz tab MVibration reduction
Reduce the effects of camera shake while shooting. Vibration reduction effectively
reduces blur, caused by slight hand movement known as camera shake, which
commonly occurs when shooting with zoom applied or at slow shutter speeds.
The effects of camera shake are reduced when recording movies, in addition to
when taking still pictures.
Set Vibration reduction to Off when using a tripod to stabilize the camera
during shooting.
Option
Description
Vibration reduction is enabled.
Vibration reduction is disabled.
g On
(default setting)
k Off
The current vibration reduction setting is indicated by an icon when shooting
B Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking pictures.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
• Vibration reduction may be unable to completely eliminate the effects of camera shake in some
situations.
E61
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Motion Detection
dbutton Mz tab MMotion detection
Enable motion detection to reduce the effects of subject movement and camera
shake when shooting still images.
Option
Description
When the camera detects subject movement or camera shake,
the ISO sensitivity and shutter speed are automatically increased
to reduce blurring.
However, motion detection does not function in the following
situations:
•
When the flash fires
setting other than Auto
In A (auto) mode, when Continuous is set to Multi-shot 16
•
U Auto
(default setting)
•
•
•
When subject tracking mode is selected
k Off
Motion detection is disabled.
The current motion detection setting is indicated by an icon when shooting
shutter speed and the motion detection icon turns green. No icon is displayed
when Off is selected.
B Notes About Motion Detection
• Motion detection may be unable to completely eliminate the effects of subject movement and
camera shake in some situations.
• Motion detection may not function if the subject exhibits significant movement or is too dark.
• The images captured using motion detection may be somewhat “grainy” in appearance.
E62
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
AF Assist
dbutton Mz tab MAF assist
Enable or disable AF-assist illuminator, which assists autofocus operation when the
subject is dimly lit.
Option
Description
AF-assist illuminator will be used to assist the focus operation
when the subject is dimly lit. The illuminator has a range of
about 1.9 m (6 ft 2 in.) at the maximum wide-angle position and
about 1.1 m (3 ft 7 in.) at the maximum telephoto position.
may not light even when Auto is selected.
Auto
(default setting)
AF-assist illuminator does not light. The camera may be unable
to focus under dim lighting.
Off
Digital Zoom
dbutton Mz tab MDigital zoom
Enable or disable digital zoom.
Option
Description
When the camera is zoomed in to the maximum optical zoom
position, rotating the zoom control to g(i) triggers digital
On
(default setting)
Off
Digital zoom will not be activated.
B Notes About Digital Zoom
• When digital zoom is in effect, the camera focuses at the center of the frame.
• Digital zoom cannot be used in the following situations.
- When Scene auto selector Portrait, Night portrait, or Pet portrait is selected in scene mode
,
- When smart portrait mode is selected
- When subject tracking mode is selected
- When Continuous is set to Multi-shot 16
E63
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Sound Settings
dbutton Mz tab MSound settings
Adjust the following sound settings.
Option
Description
Select On (default setting) or Off. When On is selected, a beep
will sound once when operations are completed successfully,
twice when the camera acquires focus on the subject, and three
times when an error is detected. Start-up sound will also play
when the camera is turned on.
Button sound
Shutter sound
Select On (default setting) or Off.
The shutter sound is not heard, even if On is selected, when
recording movies.
B Notes About Sound Settings
Button sounds and the shutter sound are not heard when using the Pet portrait scene mode.
E64
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Auto Off
dbutton Mz tab MAuto off
If no operations are performed for a specified amount of time, the monitor turns
This setting determines the amount of time that passes before the camera enters
standby mode. You can select 30 s, 1 min (default setting), 5 min, or 30 min.
C When the Monitor Has Turned Off to Save Power
• When the camera is in standby mode, the power-on lamp blinks.
• If no operations are performed for approximately another three minutes, the camera will turn off
automatically.
• When the power-on lamp is blinking, pressing any of the following buttons will turn the monitor
back on:
Power switch, shutter-release button, A button, cbutton, or b(emovie-record) button
C Notes About Auto Off
The time that passes before the camera enters standby mode is fixed in the following situations:
• When a menu is displayed: 3 minutes
• During slide show playback: Up to 30 minutes
• When the AC adapter EH-62F is connected: 30 minutes
E65
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Format Memory/Format Card
dbutton Mz tab MFormat memory/Format card
Use this option to format the internal memory or a memory card.
Formatting the internal memory or memory cards permanently deletes all
data. Data that has been deleted cannot be restored. Be sure to transfer
important images to a computer before formatting.
Formatting the Internal Memory
To format the internal memory, remove the memory
Format memory
card from the camera. The Format memory option is
displayed in the setup menu.
All images will
be deleted! OK?
Format
No
Formatting Memory Cards
When a memory card is inserted in the camera, the
Format card
Format card option is displayed in the setup menu.
All images will
be deleted! OK?
Format
No
B Notes About Formatting Internal Memory and Memory Cards
memory or memory card is formatted.
• Do not turn the camera off or open the battery-chamber/memory card slot cover during
formatting.
• The first time you insert a memory card that has been used in another device into this camera, be
sure to format it with this camera.
E66
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Language
dbutton Mz tab MLanguage
Select one of 29 languages for display of camera menus and messages.
Czech
Russian
Danish
Romanian
Finnish
German
(default setting)
Spanish
Swedish
Vietnamese
Turkish
Greek
French
Ukrainian
Arabic
Indonesian
Italian
Simplified Chinese
Traditional Chinese
Japanese
Korean
Hungarian
Dutch
Norwegian
Polish
Thai
Brazilian Portuguese
European Portuguese
Hindi
E67
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
TV Settings
dbutton Mz tab MTV settings
Adjust settings for connection to a TV.
Option
Description
Video mode
Select from NTSC and PAL.
Select a resolution for HDMI output from Auto (default setting),
480p, 720p, or 1080i. When Auto is selected, the option best
suited to the TV to which the camera is connected is
automatically selected from 480p, 720p, or 1080i.
HDMI
Select whether or not the camera can receive signals from a TV
that supports the HDMI-CEC standard when it is connected to
the TV via HDMI. When On (default setting) is selected, the TV’s
remote control can be used to control the camera during
playback. See “Using a TV Remote Control (HDMI Device
HDMI device control
C HDMI and HDMI-CEC
HDMI (High-Definition Multimedia Interface) is a multimedia interface. HDMI-CEC (HDMI-Consumer
Electronics Control) allows compatible devices to inter-operate.
E68
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Charge by Computer
dbutton Mz tab MCharge by computer
Select whether or not the battery inserted into the camera is charged when the
Option
Description
When the camera is connected to a computer that is running,
the battery inserted into the camera is automatically charged
using power supplied by the computer.
Auto
(default setting)
The battery inserted into the camera is not charged when the
camera is connected to a computer.
Off
B Notes About Connecting the Camera to a Printer
• The battery cannot be charged with connection to a printer, even if the printer complies with the
PictBridge standard.
• When Auto is selected for Charge by computer, it may be impossible to print images with direct
connection of the camera to some printers. If the PictBridge startup screen is not displayed in the
monitor after the camera is connected to a printer and turned on, turn the camera off and
disconnect the USB cable. Set Charge by computer to Off and reconnect the camera to the
printer.
B Notes About Charging with Connection to a Computer
• The battery cannot be charged, nor can data be transferred, when the camera is connected to a
battery can be charged or images can be transferred with connection to a computer. In this case,
and time.
• If the camera is turned off, charging will also stop.
• If the computer enters sleep mode while charging, charging will stop and the camera may be
turned off.
• When disconnecting the camera from the computer, turn the camera off and then disconnect the
USB cable.
• About 3 hours and 50 minutes are required to charge a fully exhausted battery. Charging time
increases when images are transferred while the battery is charging.
• When the camera is connected to a computer, an application installed on the computer, such as
Nikon Transfer 2, may start. If the camera was connected to the computer for the sole purpose of
charging the battery, exit the application.
• The camera turns off automatically if there is no communication with the computer for 30 minutes
after the battery has finished charging.
• Depending upon computer specifications, settings, and power supply and allocation, it may be
impossible to charge the battery using a computer connection while it is inserted into the camera.
E69
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
C The Charge Lamp
The following chart explains charge lamp status when the camera is connected to a computer.
Charge lamp
Description
Blinks slowly (green)
Battery charging.
Battery not charging. If the charge lamp changes from slow blinking
(green) to off while the power-on lamp is lit, charging is complete.
Off
•
The ambient temperature is not suited to charging. Charge the
battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F
to 95 °F).
•
The USB cable is not connected correctly, or the battery is faulty.
Make sure the USB cable is connected correctly and replace the
battery if necessary.
Flickers (green)
•
•
The computer is in sleep mode and is not supplying power. Wake
up the computer.
The battery cannot be charged because the computer cannot
supply power to the camera, due to the computer’s settings or its
specifications.
E70
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Blink Warning
dbutton Mz tab MBlink warning
Select whether or not the camera detects human subjects that have blinked using
option)
•
scene mode
Option
Description
When the camera detects that one or more human subjects may
have blinked in an image captured using face detection, the Did
someone blink? screen is displayed in the monitor.
The face of the human subject that may have blinked when the
shutter was released is framed by a yellow border. Should this
occur, check the image and determine whether or not another
image should be captured.
On
Off
Blink warning is disabled.
(default setting)
B Notes About Blink Warning
The blink warning does not function at continuous settings of Continuous, BSS, or Multi-shot 16.
E71
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
The Blink Warning Screen
When the Did someone blink? screen shown on the
right is displayed in the monitor, the operations
described below are available.
Did someone blink?
If no operations are performed within a few seconds,
the camera automatically returns to shooting mode.
Exit
Function
Control
Description
Enlarge the detected
face that blinked
g (i)
Rotate the zoom control to g (i).
Switch to full-frame
playback
f(h)
Rotate the zoom control to f(h).
If the camera detects that more than one human
subject blinked, press Jor Kto switch the
display to another face.
Select the face to be
displayed
Delete the image
l
Press the l button.
k
Switch to shooting
mode
Press the kbutton or the shutter-release button.
E72
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Filmstrip
dbutton Mz tab MFilmstrip
Allows you to select whether or not the filmstrip is displayed when you rotate the
Option
Description
Image thumbnails are displayed
in the bottom of the monitor
when you rotate the multi
selector quickly while viewing an
image in full-frame playback
mode.
On
1 0 /
1 0
You can view thumbnails of
previous and subsequent images,
and select an image.
While the filmstrip is displayed, you can hide it by pressing the
kbutton.
Off (default setting)
Disables the filmstrip.
B Notes About Filmstrip Display
• The filmstrip is not displayed in the following situations:
- When using favorite pictures mode
- When using auto sort mode
- When using list by date mode
• In order to display the filmstrip, at least ten images must be saved in the camera’s internal memory
or on the memory card.
E73
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Reset All
dbutton Mz tab MReset all
When Reset is selected, the camera’s settings will be restored to their default
values.
Basic Shooting Functions
Option
Default value
Auto
Off
Off
0.0
Shooting Menu
Option
Default value
P 4608 × 3456
Auto
Single
Auto
Standard color
Face priority
Single AF
Scene Mode
Option
Default value
Scene mode setting in the shooting-mode
Scene auto selector
Center
Continuous shooting in pet portrait mode
Continuous
Pet portrait auto release in pet portrait
On
Special effects mode
Option
Default value
Special effects mode setting in the
Soft
E74
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Smart Portrait Menu
Option
Default value
Normal
On
Off
Subject Tracking Menu
Option
Default value
Default value
Full-time AF
On
Movie Menu
Option
HD 720p (1280 × 720)
Single AF
Off
Setup Menu
Option
Default value
None
Auto info
On
3
Off
On
Auto
Auto
On
On
On
1 min
Auto
On
E75
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Auto
Off
Off
Others
Option
Default value
Default
3 s
Number icons (black)
Numbering will continue from the lowest number available. To reset file
numbering to “0001”, delete all images saved in the internal memory or on the
• The following menu settings will remain unaffected when menus are reset with
Reset all.
Firmware Version
dbutton Mz tab MFirmware version
View the current camera firmware version.
C O O L P I X S 6 2 0 0 Ve r. x . x
Back
E76
Download from Www.Somanuals.com. All Manuals Search And Download.
File and Folder Names
Images, movies, or voice memos are assigned file names as follows.
DSCN0001.JPG
Identifier (not shown on camera monitor)
Extension (indicates file format)
Original still images (voice
memo attachment included) DSCN
and movies
Still images
Movies
.JPG
.MOV
.WAV
Voice memos
Small copies (voice memo
SSCN
attachment included)
Cropped copies (voice memo
RSCN
File number (assigned automatically in
ascending order, starting with “0001”)
attachment included)
Images created by an image
editing function other than
FSCN
crop and small picture (voice
memo attachment included)
• Files are saved in folders named with a folder number followed by an identifier:
“P_” plus a three-digit sequential number for images captured in Panorama
“100NIKON”). When the number of files within a folder reaches 9999, a new
folder will be created. File numbers will be assigned automatically starting with
“0001”.
• Voice memo file names have the same identifier and file number as the image
to which the voice memo is attached.
• Files copied using Copy>Selected images are copied to the current folder,
where they are assigned new file numbers in ascending order starting from the
largest file number in memory. Copy>All images copies all folders from the
source medium; file names do not change but new folder numbers are
assigned in ascending order, starting from the largest folder number on the
• A single folder can hold up to 200 images; if the current folder already contains
200 images, a new folder, named by adding one to the current folder name, will
be created the next time an image is captured. If the current folder is numbered
999 and contains 200 images, or an image is numbered 9999, no further images
can be captured until the internal memory or memory card is formatted
E77
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
1
Rechargeable battery Rechargeable Li-ion Battery EN-EL12
1,2
Charging AC adapter Charging AC Adapter EH-69P
2
Battery charger
Battery Charger MH-65
AC Adapter EH-62F (connect as shown)
AC adapter
Be sure that the power connector cord has been properly aligned
in power connector and battery chamber grooves before closing
the battery-chamber/memory card slot cover. If part of the cord
runs out of the grooves, the cover or cord may be damaged when
the cover is closed.
1
USB cable
USB Cable UC-E6
1
Audio/video cable
Audio Video Cable EG-CP16
1
2
When using in other countries, use a plug adapter (commercially available) as necessary.
For more information about plug adapters, consult your travel agency.
E78
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
O (blinks)
Clock not set.
Set date and time.
N
Battery exhausted.
Charge or replace battery.
Battery exhausted.
Turn off camera, and allow
battery to cool down before
resuming use. After five
seconds, this message will
disappear, the monitor will
turn off, and the power-on
lamp will blink rapidly. After
the lamp blinks for three
minutes, the camera will turn
off automatically. Pressing the
power switch also turns off
the camera.
P
Battery temperature is
high.
Battery temperature
high
•
•
Refocus.
Use focus lock.
Q (● blinks red)
Camera cannot focus.
P
Camera cannot perform Wait until message clears
Please wait for the
camera to finish
recording.
other operations until
saving is complete.
from display automatically
when saving is complete.
–
–
u
Write-protect switch is
in “lock” position.
Slide write-protect switch to
“write” position.
Memory card is write
protected.
P
•
•
Use approved card.
Check that terminals are
clean.
is correctly inserted.
This card cannot be
used.
Error accessing memory
card.
P
•
This card cannot be
read.
Formatting deletes all data
saved on the memory card. Be
sure to select No and make
copies of any images which
P
Card is not formatted. Memory card has not
Format card?
been formatted for use need to be kept before
Yes
No
in COOLPIX S6200.
formatting the memory card.
Select Yes and press the k
button to format the memory
card.
E79
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
•
•
•
•
Select smaller image size.
Delete images.
Insert new memory card.
use internal memory.
u
Memory card is full.
Out of memory.
Error occurred while
saving image.
Format internal memory or
memory card.
Insert a new memory card or
format internal memory or
memory card.
Camera has run out of
file numbers.
The following images cannot
be registered as welcome
screen.
P
Image cannot be
saved.
•
Images captured at an
4608×2592
Image cannot be used
for welcome screen.
•
Images reduced to 320 × 240
size or smaller with cropping
or small image editing
Insufficient space to
save a copy.
Delete images from
destination.
N
•
•
•
•
Album is full. No
further pictures can be been added to album.
added.
200 images have already
album.
Add to other albums.
–
Voice memos cannot be
attached to movies.
Select an image captured
with this camera.
P
A voice memo cannot
Sound file cannot be
be attached to this file.
saved.
u
One or more portrait
subjects may have
blinked when the
picture was taken.
A blink was detected
in the picture just
taken.
Check the image in playback
mode.
N
•
•
Cannot edit selected
image.
Image cannot be
modified.
editing function.
Movies cannot be edited.
–
Time out error while
saving movie on the
memory card.
u
Select memory card with
faster write speed.
Cannot record movie.
E80
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
•
•
Remove the memory card
from the camera to play
back images saved in the
camera’s internal memory.
To copy image from
No images in the
internal memory or
memory card.
internal memory to
memory card, press the
dbutton. The copy
screen will be displayed
and images in the internal
memory can be copied to
memory card.
N
Memory contains no
images.
No images have been
added to the selected
album.
•
•
Add images to the album.
Select an album to which
images are added.
No images are
contained in the
category selected in
auto sort mode.
Select the category
containing the sorted images.
N
File contains no image
data.
File cannot be viewed on this
File not created with this camera. View file using a
–
camera.
computer or the devices used
to create or edit this file.
P
This file cannot be
played back.
N
No images available for
–
All images are hidden. a slide show.
N
This image cannot be Image is protected.
deleted.
Disable protection.
N
Destination in same
Travel destination is in
time zone as home.
the current time zone.
–
Turn camera off and then on
again. If error persists, contact
retailer or Nikon-authorized
service representative.
Lens error
Lens error.
Q
Error occurred during
communication with
Communications error
printer.
P
Turn camera off and
reconnect USB cable.
E81
Download from Www.Somanuals.com. All Manuals Search And Download.
Error Messages
Display
Problem
Solution
A
Turn camera off, remove and
reinsert battery, and turn
camera on. If error persists,
contact retailer or Nikon-
authorized service
Error has occurred in
camera’s internal
circuitry.
System error
Q
representative.
Check printer. After solving
the problem, select Resume
and press the kbutton to
resume printing.*
PR
Printer error: check
printer status.
Printer error.
–
–
–
–
Load the specified paper size,
Specified size of paper is select Resume, and press the
PR
Printer error: check
paper
not loaded in printer.
kbutton to resume
printing.*
Remove the jammed paper,
select Resume, and press the
kbutton to resume
printing.*
PR
Printer error: paper
jam
Paper has jammed in
printer.
Load the specified paper size,
select Resume, and press the
kbutton to resume
printing.*
PR
Printer error: out of
paper
No paper is loaded in
printer.
Check ink, select Resume,
and press the kbutton to
resume printing.*
PR
Ink error.
–
–
–
Printer error: check ink
Replace ink cartridge, select
Resume, and press the k
button to resume printing.*
PR
Running out of ink or ink
Printer error: out of ink cartridge is empty.
PR
Printer error: file
An error caused by the
Select Cancel and press the
image file has occurred. kbutton to cancel printing.
corrupt
* See the documentation provided with your printer for further guidance and information.
E82
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes and Index
The Camera.............................................................................................................F2
The Battery..............................................................................................................F4
Charging AC Adapter..........................................................................................F5
Memory Cards .......................................................................................................F5
Cleaning...................................................................................................................F6
Storage.....................................................................................................................F6
Supported Standards....................................................................................... F18
F1
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Notes and Index
Caring for the Product
The Camera
To ensure continued enjoyment of this Nikon product, observe the following
precautions when using or storing the device.
B Do Not Drop
The product may malfunction if subjected to strong shock or vibration.
B Handle the Lens and All Moving Parts with Care
Do not apply force to the lens, lens cover, monitor, memory card slot, or battery chamber. These
parts are easily damaged. Applying force to the lens cover could result in camera malfunction or
damage to the lens. Should the monitor break, care should be taken to avoid injury caused by
broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes
or mouth.
B Keep Dry
The device will be damaged if immersed in water or subjected to high humidity.
B Avoid Sudden Changes in Temperature
Sudden changes in temperature, such as when entering or leaving a heated building on a cold day,
can cause condensation to form inside the device. To prevent condensation, place the device in a
carrying case or a plastic bag before exposing it to sudden changes in temperature.
B Keep away from Strong Magnetic Fields
Do not use or store this device in the vicinity of equipment that generates strong electromagnetic
radiation or magnetic fields. Strong static charge or the magnetic fields produced by equipment
such as radio transmitters could interfere with the monitor, damage data saved on the memory card,
or affect the product’s internal circuitry.
B Do Not Point the Lens at Strong Light Sources for Extended Periods
Avoid pointing the lens at the sun or other strong light sources for extended periods when using or
storing the camera. Intense light may cause deterioration of the image sensor, producing a white
blur effect in photographs.
B Turn the Product off Before Removing or Disconnecting the Power Source
Do not remove the battery while the product is on, or while images are being saved or deleted.
Forcibly cutting power in these circumstances could result in loss of data or in damage to product
memory or internal circuitry.
F2
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Product
B Notes About the Monitor
• The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic
common to all TFT LCD displays, and does not indicate a malfunction. Images saved using the
product will not be affected.
• White or colored streaks may be visible when bright subjects are framed in the monitor. This
phenomenon, known as “smear,” occurs when extremely bright light strikes the image sensor; it is
characteristic of image sensors and does not indicate a malfunction. Smear may also take the form
of partial discoloration in the monitor during shooting. It does not appear in images saved with
the camera except in the cases of movies and of images saved with Multi-shot 16 selected for
Continuous. When shooting in these modes, we recommend that you avoid bright subjects such
as the sun, reflected sunlight, and electric lights.
• Images in the monitor may be difficult to see under bright lighting.
• The monitor is lit by an LED backlight. Should the monitor begin to dim or flicker, contact your
Nikon-authorized service representative.
F3
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Product
The Battery
• Check the battery level before using the camera and replace or charge the battery if necessary. Do
not continue charging once the battery is fully charged as this will result in reduced battery
performance. Whenever possible, carry a fully charged spare battery when taking pictures on
important occasions.
• Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F).
• Charge the battery indoors with an ambient temperature of 5 °C to 35 °C (41 °F to 95 °F) before
use.
• When charging the camera using the Charging AC adapter EH-69P or a computer, the charge
capacity may decrease at ambient temperatures 45 °C to 60 °C (113 °F to 140 °F).
• The battery is not charged at ambient temperatures below 0 °C (32 °F) or above 60 °C (140 °F).
• Note that the battery may become hot during use; wait for the battery to cool before charging.
Failure to observe these precautions could damage the battery, impair its performance, or prevent
it from charging normally.
• On cold days, the capacity of batteries tends to decrease. If an exhausted battery is used at a low
temperature, the camera not turn on. Be sure that the battery is fully charged before heading
outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as
necessary. Once warmed, a cold battery may recover some of its charge.
• Dirt on the battery terminals can prevent the camera from functioning. Should the battery
terminals become dirty, wipe them off with a clean, dry cloth before use.
• If the battery will not be used for some time, insert it in the camera and run it flat before removing
it for storage. The battery should be stored in a cool location with an ambient temperature of 15 to
25 °C (59 to 77 °F). Do not store the battery in hot or extremely cold locations.
• Always remove the battery from the camera or optional battery charger when it is not being used.
When inserted, minute amounts of current are drawn from the battery even when not in use. This
may result in excessive draining of the battery and complete loss of function. Turning the camera
on or off while the battery is exhausted can result in reduced battery life.
• Recharge the battery at least once every six months and completely exhaust it before returning it
to storage.
• After removing the battery from the camera or optional battery charger, replace the included
terminal cover and store it in a cool place.
• A marked drop in the time a fully-charged battery retains its charge, when used at room
temperature, indicates that the battery needs to be replaced. Purchase a new EN-EL12 battery.
• Replace the battery when it no longer holds a charge. Used batteries are a valuable resource.
Please recycle used batteries in accordance with local regulations.
F4
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Product
Charging AC Adapter
• The Charging AC Adapter EH-69P is for use only with compatible devices. Do not use with another
make or model of device.
• The EH-69P is compatible with AC 100-240 V, 50/60 Hz electrical outlets. When using in other
countries, use a plug adapter (commercially available) as necessary. For more information about
plug adapters, consult your travel agency.
• Do not, under any circumstances, use another make or model of AC adapter other than Charging
AC Adapter EH-69P or USB-AC adapter. Failure to observe this precaution could result in
overheating or in damage to the camera.
Memory Cards
memory cards.
• Observe the precautions noted in the documentation included with your memory card.
• Do not affix labels or stickers to the memory card.
• Do not format the memory card using a computer.
• Before using a memory card with this camera, we recommend using this camera to format the
memory card, especially if the memory card was used previously in another device.
• Note that formatting a memory card permanently deletes all images and other data on the
memory card. If there is data saved on the memory card that you wish to keep, copy that data to
a computer before formatting.
• If the message Card is not formatted. Format card? is displayed when the camera is turned on,
the memory card must be formatted. If there is data on the memory card that you do not want to
delete, select No and press the kbutton. Copy that data to a computer before formatting. To
format the memory card, select Yes.
• Observe the following precautions while formatting the memory card, saving and deleting
images, and copying images to a computer, otherwise data or the memory card itself may be
damaged.
- Do not open the battery-chamber/memory card slot cover or remove the memory card or
battery.
- Do not turn off the camera
- Do not disconnect the AC adapter
F5
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Storage
Cleaning
Avoid touching glass parts with your fingers. Remove dust or lint with a blower
(typically a small device with a rubber bulb attached to one end that is
pumped to produce a stream of air out the other end). To remove fingerprints
or other stains that cannot be removed with a blower, wipe the lens with a soft
cloth, using a spiral motion that starts at the center of them and working
toward the edges. If this fails, clean the lens using a cloth lightly dampened
with commercial lens cleaner.
Lens
Remove dust or lint with a blower. To remove fingerprints and other stains,
clean the monitor with a soft, dry cloth, being careful not to apply pressure.
Monitor
Body
Use a blower to remove dust, dirt, or sand, then wipe gently with a soft, dry
cloth. After using the camera at the beach or other sandy or dusty
environment, wipe off any sand, dust, or salt with a dry cloth lightly dampened
with fresh water and dry thoroughly. Note that foreign matter inside the
camera could cause damage not covered by the warranty.
Do not use alcohol, thinner, or other volatile chemicals.
Storage
Turn the camera off when not in use. Be sure that the power-on lamp is off before
putting the camera away. Remove the battery if the camera will not be used for an
extended period. Do not store the camera with naphtha or camphor moth balls, or
in any of the following locations:
• Next to equipment that produces strong electromagnetic fields, such as
televisions or radios
• Exposed to temperatures below –10 °C (14 °F) or above 50 °C (122 °F)
• Places that are poorly ventilated or subject to humidity of over 60%
To prevent mold or mildew, take the camera out of storage at least once a month.
Turn the camera on and release the shutter a few times before putting the camera
away again.
F6
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service representative.
Power, Display, Settings Issues
Problem
Cause/Solution
Confirm all connections.
setup menu.
A
•
•
•
computer, battery charging stops when the
camera is turned off.
Battery inserted in the
camera cannot be
charged.
•
computer, battery charging stops when the
computer is suspended (sleeping), and the
camera may turn off.
•
Depending upon computer specifications,
settings, and status, charging the battery
inserted in the camera may not be possible via
computer connection.
–
•
•
Battery is exhausted.
Camera cannot be turned
on.
The camera cannot be turned on while
connected to an electrical outlet via the
Charging AC Adapter.
•
•
Battery is exhausted.
Camera has turned off automatically to save
power.
•
•
•
The camera or battery have become too cold
and cannot operate properly.
is connected while the camera is on.
Camera turns off without
warning.
The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
Inside of the camera has become hot. Leave the
camera off until the inside of the camera has
cooled, and then try turning it on again.
•
–
F7
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
•
•
Camera is off.
Standby mode for saving power: press the
power switch, the shutter-release button, A
button, cbutton, or b(emovie-record)
button.
Monitor is blank.
•
•
•
When flash lamp blinks, wait until flash has
charged.
Camera and computer are connected via USB
cable.
cable or HDMI cable.
•
•
Adjust monitor brightness.
Monitor is dirty. Clean monitor.
Monitor is hard to read.
•
If camera clock has not been set, “Date not set”
indicator blinks during shooting and movie
recording. Images and movies saved before
Date and time of
recording are not correct.
date option in the setup menu.
Check camera clock regularly against more
accurate timepieces and reset as required.
•
No indicators displayed in Hide info is selected for Photo info.
monitor. Select Show info.
Print date not available. Camera clock has not been set.
Date not imprinted on
images even when Print
date is enabled.
•
•
The current shooting mode is one that does not
support Print date.
The date cannot be imprinted on movies.
Screen for setting time
zone and date is displayed
when camera is turned on.
Clock battery is exhausted; all settings were
restored to their default values.
Camera settings reset.
Battery temperature is high. Turn off camera and
Monitor turns off, and the allow battery to cool down before resuming use.
power-on lamp blinks
rapidly.
After the lamp blinks for three minutes, the
camera will turn off automatically. Pressing the
power switch also turns off the camera.
F8
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
The camera may become hot when shooting
movies for an extended period of time or when
the camera is used in a hot area; this is not a
malfunction.
Camera becomes hot.
–
Characteristics of Digital Cameras
In extremely rare instances, unusual characters may appear in the monitor and the
camera may stop functioning. In most cases, this phenomenon is caused by a
strong external static charge. Turn the camera off, remove and replace the battery,
then turn the camera on again. In the event of continued malfunction, contact
your retailer or Nikon-authorized service representative. Note that disconnecting
the power source as described above may result in the loss of any data not saved
to internal memory or the memory card at the time the problem occurred. Data
already saved will not be affected.
Shooting Issues
Problem
Cause/Solution
A
Cannot switch to shooting
mode.
Disconnect HDMI cable or USB cable.
•
button, the shutter-release button, or the b
(emovie-record) button.
No image captured when
the shutter-release button
is pressed.
•
When menus are displayed, press the d
button.
Battery is exhausted.
•
•
When flash lamp blinks, flash is charging.
•
Subject is too close. Try shooting using macro
mode, or the Scene auto selector or Close-up
scene modes.
Camera cannot focus.
•
The intended subject is one with which
autofocus does not perform well.
•
•
Set AF assist in the setup menu to Auto.
Turn camera off and then on again.
F9
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
•
•
•
•
Use flash.
Increase the ISO sensitivity value.
Images are blurred.
Use D (best shot selector).
•
Use tripod and self-timer.
Smear occurs when extremely bright light strikes
Streaks of light or partial
the image sensor. When shooting with Continuous
discoloration are visible in set to Multi-shot 16 and when recording movies,
the monitor.
avoiding bright objects, such as the sun, reflections
of the sun, and electric lights is recommended.
Bright specks appear in
images captured with flash. mode setting to W (off).
Flash is reflecting off particles in air. Set the flash
•
•
The flash mode is set to W (off).
is selected.
Flash does not fire.
•
•
•
•
Digital zoom is set to Off in the setup menu.
Digital zoom cannot be used in the following
situations.
-
portrait, or Pet portrait is selected in scene
mode
Digital zoom cannot be
used.
-
-
-
When smart portrait mode is selected
When subject tracking mode is selected
set to Multi-shot 16
When recording movies
-
Image mode not
available.
Another function that restricts the Image mode
option is enabled.
Off is selected for Sound settings > Shutter
No sound when shutter is sound in setup menu. No sound is heard with
released.
some shooting modes and settings, even when
On is selected.
Off is selected for the AF assist option in the
AF-assist illuminator does setup menu. AF-assist illuminator may not light
not light.
depending on the position of the focus area or the
current scene mode, even when Auto is selected.
Images appear smeared.
Colors are unnatural.
Lens is dirty. Clean lens.
White balance or hue is not adjusted properly.
F10
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
The subject is dark, so shutter speed is too slow or ISO
sensitivity is too high. Noise can be reduced by:
Randomly spaced bright
pixels (“noise”) appear in
image.
•
•
Using flash.
Specifying a lower ISO sensitivity setting.
•
•
•
•
•
•
The flash mode is set to W (off).
Flash window is blocked.
Subject is beyond flash range.
Adjust exposure compensation.
Increase ISO sensitivity.
Images are too dark
(underexposed).
or set the flash mode setting to (fill flash).
X
Images are too bright
(overexposed).
Adjust exposure compensation.
When taking pictures with (auto with red-eye
V
reduction) or fill flash with slow sync and red-eye
reduction in Night portrait scene mode, In-Camera
Red Eye Fix may be applied to areas not affected by
red-eye in rare cases. Use any scene mode other than
Night portrait, and change the flash mode to any
Unexpected results when
flash set to V (auto with
red-eye reduction).
setting other than
V
(auto with red-eye reduction)
and try taking a picture again.
•
•
In some shooting conditions, facial skin tones
may not be smoothed.
Use Skin softening in the playback menu for
images containing four or more faces.
Skin tones are not
softened.
It may take more time to save images in the
following situations.
•
When the noise reduction function is in
operation, such as when shooting in a dark
environment
–
Saving images takes time.
•
•
When the flash mode is set to V (auto with
red-eye reduction)
When the skin softening function is applied
while shooting
Playback Issues
Problem
Cause/Solution
A
–
•
•
File or folder was overwritten or renamed by
computer or other make of camera.
The COOLPIX S6200 is not able to play back
movies recorded with another make or model
of digital camera.
File cannot be played
back.
F11
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
•
•
Playback zoom cannot be used with movies,
small pictures, or images that have been
cropped to a size of 320 × 240 or smaller.
This camera may not be able to zoom in on
images captured with another make or model
of digital camera.
Cannot zoom in on image.
–
–
•
•
Voice memos cannot be attached to movies.
Voice memos cannot be attached to images
captured with other cameras. Voice memos
attached to images using another camera
cannot be played back on this camera.
Cannot record voice
memos.
•
•
These options cannot be used with movies.
–
editing feature cannot be applied multiple
times.
other cameras.
Cannot use quick retouch,
D-Lighting, skin softening,
filter effects, small picture,
or crop.
•
The camera cannot rotate images captured with
another make or model of digital camera.
Cannot rotate image
–
•
TV settings setup menu.
•
Cables are connected to the HDMI mini
Images are not displayed
on TV.
•
memory card. Remove the memory card to play
back images from the internal memory.
Album icons are reset to
their default icons, images Data saved in the internal memory or on the
added to albums cannot
be displayed in favorite
pictures mode.
memory card may not be played back correctly if
overwritten by a computer.
–
F12
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Cause/Solution
A
•
•
The desired image was sorted to a category
other than the category currently displayed.
Images saved by a camera other than the
COOLPIX S6200 and images copied using the
Copy option cannot be displayed in auto sort
mode.
The saved images are not
displayed in auto sort
mode.
•
•
Images saved in the internal memory or on the
memory card may not be played back correctly
if overwritten by a computer.
Up to 999 images and movies in total can be
added to each category. If the desired category
already contains 999 images or movies in total,
new images or movies cannot be added.
–
•
•
•
•
•
•
Camera is off.
Battery is exhausted.
–
USB cable is not correctly connected.
Camera is not recognized by the computer.
Confirm system requirements.
Computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
Nikon Transfer 2 does not
start when camera is
connected.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print images when
Auto is selected for the Charge by computer
option in the setup menu. Set the Charge by
computer option to Off and reconnect the
camera to the printer.
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
•
Memory card contains no images. Replace the
memory card.
Remove the memory card to print images from
the internal memory.
Images to be printed are
not displayed.
•
Paper size cannot be selected from the camera in
the following situations, even when printing from
a PictBridge-compatible printer. Use the printer to
select paper size.
Cannot select paper size
with camera.
•
The printer does not support the paper sizes
specified by the camera.
–
•
The printer automatically selects the paper size.
F13
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Nikon COOLPIX S6200 Digital Camera
Type
Compact digital camera
16.0 million
Effective pixels
Image sensor
Lens
1
/2.3-in. type CCD; approx. 16.44 million total pixels
10× optical zoom, NIKKOR lens
4.5-45.0mm (angle of view equivalent to that of 25-250 mm
lens in 35mm [135] format)
Focal length
f/-number
f/3.2-5.8
Construction
8 elements in 8 groups (1 ED lens element)
Up to 4× (angle of view equivalent to that of approx. 1000 mm
lens in 35mm [135] format)
Digital zoom
Vibration reduction
Autofocus (AF)
Lens shift
Contrast-detect AF
•
[W]: Approx. 50 cm (1 ft 8 in.) to ∞,
[T]: Approx. 1.0 m (3 ft 4 in.) to ∞
Macro mode: Approx. 10 cm (4 in.) to
position)
Focus range
(from the center of the
front of the lens)
•
∞
(wide-angle
Face priority, auto (9-area automatic selection), manual with 99
focus areas, center, subject tracking
Focus-area selection
Monitor
6.7 cm (2.7-in.), approx. 230k-dot, TFT LCD with anti-reflection
coating and 5-level brightness adjustment
Frame coverage
(shooting mode)
Frame coverage
(playback mode)
Approx. 98% horizontal and 98% vertical
Approx. 100% horizontal and 100% vertical
Storage
Internal memory (approx. 74 MB), SD/SDHC/SDXC memory
card
Media
File system
DCF, Exif 2.3, and DPOF compliant
Still pictures: JPEG
Sound files (Voice Memo): WAV
File formats
Movies: MOV (Video: H.264/MPEG-4 AVC, Audio: AAC stereo)
F14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
•
•
•
•
•
•
•
•
•
16M (High) [4608 × 3456P]
16M [4608 × 3456]
12M [4000 × 3000]
8M [3264 × 2448]
5M [2592 × 1944]
3M [2048 × 1536]
PC [1024 × 768]
Image size
(pixels)
VGA [640 × 480]
16:9 [4608 × 2592]
ISO sensitivity
(Standard output
sensitivity)
•
•
•
ISO 80, 100, 200, 400, 800, 1600, 3200
Auto (auto gain from ISO 80 to 1600)
Fixed range auto (ISO 80 to 400, 80 to 800)
Exposure
256-segment matrix, center-weighted (digital zoom less than
2×), spot (digital zoom 2× or more)
Metering
Programmed auto exposure with motion detection and
exposure compensation (–2.0 to +2.0 EV in steps of /3 EV)
Exposure control
Shutter
1
Mechanical and charge-coupled electronic shutter
1
•
•
/2000 -1 s
Speed
4 s (Fireworks show scene mode)
Aperture
Range
Electronically-controlled ND filter (–3.3 AV) selection
2 steps (f/3.2 and f/10.2 [W])
Self-timer
Flash
Can be selected from 10 s and 2 s
Range (approx.)
(ISO sensitivity: Auto)
[W]: 0.5 to 4.6 m (1 ft 8 in. to 15 ft)
[T]: 0.5 to 3.0 m (1 ft 8 in. to 9 ft 10 in.)
Flash control
Interface
TTL auto flash with monitor preflashes
Hi-Speed USB
Data transfer protocol
Video output
MTP, PTP
Can be selected from NTSC and PAL
Can be selected from Auto, 480p, 720p, and 1080i
HDMI output
Audio/video (A/V) output; digital I/O (USB)
HDMI mini connector (Type C) (HDMI output)
I/O terminal
Arabic, Chinese (Simplified and Traditional), Czech, Danish,
Dutch, English, Finnish, French, German, Greek, Hindi,
Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian,
Polish, Portuguese (European and Brazilian), Romanian,
Russian, Spanish, Swedish, Thai, Turkish, Ukrainian, Vietnamese
Supported languages
Power sources
One Rechargeable Li-ion Battery EN-EL12 (included)
AC Adapter EH-62F (available separately)
F15
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Charging time
Approx. 3 hours and 20 minutes (when using Charging AC
Adapter EH-69P
and when no charge remains)
Still pictures*: Approx. 250 shots
Movies: Approx. 1 h 40 min (HD 720p)
Battery life
(EN-EL12)
The maximum file size for a single movie is 4 GB and the
maximum movie length for a single movie is 29 minutes, even
when there is sufficient free space on the memory card for
longer recording.
Tripod socket
1/4 (ISO 1222)
Approx. 93.0 × 56.7 × 25.4 mm (3.7 × 2.3 × 1.0 in.) (excluding
projections)
Dimensions (W × H × D)
Weight
Approx. 160 g (5.7 oz) (including battery and SD memory card)
Operating environment
Temperature
Humidity
0°C to 40°C (32°F to 104°F)
Less than 85% (no condensation)
• Unless otherwise stated, all figures are for a camera with a fully-charged
Rechargeable Li-ion Battery EN-EL12 operated at an ambient temperature of
25°C (77°F).
* Based on Camera and Imaging Products Association (CIPA) standards for measuring the life
of camera batteries. Measured at 23 ( 2)°C (73 ( 4)°F); zoom adjusted with each shot, flash
fired with every other shot, image mode set to P 4608×3456. Battery life may vary
depending on shooting interval and length of time menus and images are displayed.
F16
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Rechargeable Li-ion Battery EN-EL12
Type
Rechargeable lithium-ion battery
Rated capacity
Operating temperature
DC 3.7 V, 1050 mAh
0°C to 40°C (32°F to 104°F)
Dimensions (W × H × D) Approx. 32 × 43.8 × 7.9 mm (1.2 × 1.7 × 0.3 in.)
Weight Approx. 22.5 g (0.8 oz) (excluding terminal cover)
Charging AC Adapter EH-69P
Rated input
AC 100-240 V, 50/60 Hz, 0.068-0.042 A
Rated capacity
Rated output
6.8–10.1 VA
DC 5.0 V, 550 mA
0°C to 40°C (32°F to 104°F)
Operating temperature
Approx. 55 × 22 × 54 mm (2.2 × 0.9 × 2.1 in.) (excluding plug
adapter)
Dimensions (W × H × D) For Argentina: Approx. 55 × 59 × 63 mm (2.2 × 2.4 × 2.5 in.)
For Brazil and Korea: Approx. 55 × 59 × 66.5 mm (2.2 × 2.4 ×
2.6 in.)
Approx. 55 g (2.0 oz) (excluding plug adapter)
Weight
For Argentina, Brazil, and Korea: Approx. 80 g (2.9 oz)
B Specifications
• Nikon will not be held liable for any errors this manual may contain.
• The appearance of this product and its specifications are subject to change without notice.
F17
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Supported Standards
•
•
•
DCF: Design Rule for Camera File System is a standard widely used in the digital
camera industry to ensure compatibility among different makes of camera.
DPOF: Digital Print Order Format is an industry-wide standard that allows
images to be printed from print orders saved on memory cards.
Exif version 2.3: Exchangeable image file format (Exif) version 2.3 for digital still
cameras is a standard that allows information saved with photographs to be
used for optimal color reproduction when images are output from Exif-
compliant printers.
•
PictBridge: A standard developed cooperatively by the digital camera and
printer industries, allowing photographs to be output directly to a printer
without connecting the camera to a computer.
F18
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
H
E
I
J
F
L
M
F20
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Q
R
N
O
S
P
F21
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
T
U
V
W
Z
F22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Multi Tech Systems Network Card MT2834ZDX User Manual
NEC Projector MT1050 User Manual
Nortel Networks Welding System 411 2021 111 User Manual
Nvidia Computer Hardware NVIDIA Quadro User Manual
NXP Semiconductors Car Amplifier TDA8560Q User Manual
Omnimount Projector Accessories UN A B User Manual
Onkyo Stereo Receiver HT RC360 User Manual
Onkyo Stereo Receiver TX NR3009 User Manual
Oregon Scientific Clock RA308PH User Manual
Panasonic Electric Shaver ES LT41 User Manual