DELUXE
PROGRAMMABLE
THERMOSTATS
User's Manual
Menu Driven Display
Fully Programmable
24 VAC with Worry-Free
Memory Storage
English, Spanish or
French Display Option
110-1023C
Two Year Warranty
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I turn on the heating or cooling cycles?
MONDAY
3:29 PM
From the main screen press MENU.
COOL
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
MENU
PROGRAM
Use the UP or DOWN arrows to highlight HEAT/COOL.
Press SELECT.
HEAT / COOL
DAY / TIME
FAN
MORE
HEAT / COOL SETTINGS
HOME
SELECT
HEAT
Use the UP or DOWN arrows to highlight HEAT, COOL
or AUTO. Press SELECT. The SELECT button will turn
on or off the desired cycle. You do not have to turn off
HEAT to turn on COOL. When HEAT or COOL or AUTO
is turned on, all others are automatically shut off. After
pressing the SELECT button, the main screen will
automatically appear.
COOL
AUTO
EMERGENCY HEAT
MAIN MENU
HEAT / COOL SETTINGS
HEAT
SELECT
COOL
NOTE: Emergency heat is only used on the 9720imodel.
AUTO
EMERGENCY HEAT
MAIN MENU
SELECT
5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
How do I cycle the fan?
MONDAY
3:29 PM
COOL
From the main screen press MENU.
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
MENU
Use the UP or DOWN buttons until FAN is highlighted. Press SELECT.
PROGRAM
HEAT / COOL
DAY / TIME
FAN
MORE
HOME
SELECT
Use the UP or DOWN buttons to highlight FAN settings.
Press SELECT.
FAN MENU
FAN SETTINGS
Three choices are available:
FAN PROGRAM
FAN SETTINGS
ON will turn the fan on continuously.
ON
AUTO will turn the fan on only
MAIN MENU
SELECT
AUTO
when there is a call for heating
or cooling.
INTERMITTENT will turn the fan
on for a set period of time for a
given interval. Highlight the choice
you desire and press SELECT.
INTERMITTENT
MAIN MENU
SELECT
How does INTERMITTENT FAN work?
INTERMITTENT FAN
INTERMITTENT will turn the fan on for a set period of time for a
given interval.
ON ꢀ
TIMEꢀ
5ꢀ MIN
The thermostat will cycle the fan on for the set ON cycle. The fan will remain off for the set OFF cycle.
OFF ꢀ TIMEꢀ
20ꢀ MIN
If the HVAC system runs for a longer period than the ON cycle, the OFF cycle will start counting over
again when the system shuts off.
FAN MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I temporarily change the temperature?
MONDAY
3:29 PM
COOL
From the main screen, press the UP or DOWN button. The screen
will change to the following.
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
SET TEMPERATURE AT
Use the UP or DOWN button to adjust to the desired
temperature. This is a temporary 3-hour hold or until
the next programmed event, whichever is shorter.
For a longer duration see page 9.
F
70.0˚
UNTIL 6:29 PM
HOME
SET TEMP
After pressing the SET
SET AT 70°F UNTIL 6:29 PM
TEMP button or after 5
seconds the screen will
indicate the new setpoint
and its duration. To return
to the normal operating
program mode, press
RESUME PROGRAM.
F
COOL
FAN AUTO
70.5˚
OUTSIDE 24˚F
RESUME
PROGRAM
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
Can I set a temporary adjustment for longer than 3 hours?
MONDAY
3:29 PM
COOL
FAN AUTO
Yes you can! Press the HOLD TEMP button. The following screen appears.
78.1
SET AT
78
HOLD TEMP
MENU
HOLD SETTINGS
PERMANENT HOLD
Press the DOWN button to highlight TEMPORARY HOLD. Press SELECT.
TEMPORARY HOLD
VACATION HOLD
HOME
SELECT
TEMPORARILY AT
The temperature should be highlighted.
F
Press the UP or DOWN button to adjust
70.0˚
the temperature. Press SET TEMP.
UNTIL 3:49 PM
HOME
SET TEMP
TEMPORARILY AT
F
70.0˚
The time should be highlighted. Press the UP or
DOWN button to adjust the time. Press SET TIME.
UNTIL 3:49 PM
SET AT 70°F UNTIL 8:29 PM
HOME
SET TIME
COOL
FAN AUTO
F
°
The main screen will now indicate a TEMPORARY HOLD until the
desired time. Press RESUME PROGRAM to return to the program
operating mode.
77.0
RESUME
PROGRAM
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
Can I set the thermostat to hold one temperature indefinitely?
MONDAY
3:29 PM
COOL
You can do that too! From the main screen press the HOLD TEMP button. The following screen appears.
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
HOLD SETTINGS
The PERMANENT HOLD feature should be highlighted. If it is not, use
the UP or DOWN arrow to highlight it. Press SELECT.
PERMANENT HOLD
TEMPORARY HOLD
VACATION HOLD
HOME
PERMANENTLY AT
SELECT
F
Use the UP or DOWN arrow to set the temperature to
the desired level. Press SET TEMP.
70.0˚
HOME
SET TEMP
PERMANENTLY SET AT 71.0°F
The main screen will now
F
COOL
FAN AUTO
indicate a PERMANENT
HOLD. Press RESUME
PROGRAM to return to the
program operating mode.
70.0˚
OUTSIDE 24˚F
RESUME
PROGRAM
MENU
How do I return to the Program Mode after being in HOLD?
PERMANENTLY SET AT 71.0°F
F
COOL
FAN AUTO
Simply press the RESUME PROGRAM button. This works from all HOLD screens.
70.0˚
OUTSIDE 24˚F
RESUME
PROGRAM
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
9
10
How do I set the Vacation Mode?
MONDAY
3:29 PM
COOL
Take a trip and don’t worry about the temperature! From the main screen press the HOLD TEMP
button. The following screen appears.
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
HOLD SETTINGS
Use the UP or DOWN arrow to highlight the VACATION HOLD feature.
PERMANENT HOLD
Press SELECT.
TEMPORARY HOLD
VACATION HOLD
HOME
SELECT
VACATION SETTING
F
The temperature should be highlighted. Use the UP
or DOWN arrow change to the desired temperature.
Press SET TEMP.
70.0˚
FOR 7 DAYS
HOME
SET TEMP
VACATION SETTING
F
The number of days should be blinking. Use the
UP or DOWN arrow to set the length of your
vacation. Press SET DAY.
70.0˚
FOR 7 DAYS
HOME
SET DAY
SET AT 70°F FOR 7 DAYS
COOL
F
°
FAN AUTO
77.0
The main screen will now indicate the VACATION settings.
Press RESUME PROGRAM to cancel and return to the
program operating mode.
OUTSIDE 24°F
RESUME
PROGRAM
MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I program my thermostat?
MONDAY
3:29 PM
COOL
FAN AUTO
From the main screen press the MENU button.
78.1
SET AT
78
HOLD TEMP
MENU
MENU
PROGRAM
Use the UP or DOWN button to highlight PROGRAM. Press SELECT.
You can select a variety of programming. Make your
HEAT / COOL
DAY / TIME
FAN
MORE
HOME
SELECT
SELECT PROGRAM DAYS
selection and press SELECT. MON-SUN allows every
day to be set the same. MON-FRI allows for weekday
programming while SAT-SUN will adjust weekends differ-
ently. You also can select each day of the week individu-
ally. NOTE: Even if you select MON-SUN, you still can
go back and change individual days to suit your lifestyle.
MON TO SUN
MON TO FRI
SAT TO SUN
MONDAY
MORE
SELECT
MAIN MENU
MONDAY PROGRAM
HEAT
Use the UP or DOWN button to
select the event to program. The
thermostat can be selected for 2,
4, or 6 events per day. See USER
SETTINGS for EVENTS PER
COOL
WAKEꢀ 06:30Aꢀ
MORNꢀ 08:30Aꢀ
04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
70.0ꢀ 78.0
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
EVEꢀ
DAY selection. After selecting the
event to program, press SELECT.
MAIN MENU
SELECT
Please go to the next page for a continued discussion on "How to program your thermostat."
Download from Www.Somanuals.com. All Manuals Search And Download.
11
12
How do I program my thermostat? (Con’t.)
MONDAY PROGRAM
HEAT
COOL
WAKEꢀ 06:00Aꢀ
MORNꢀ 08:30Aꢀ
70.0ꢀ 78.0
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
The time for the first event should be highlighted. Use the UP or DOWN key to change the time.
Press SET TIME.
EVEꢀ
04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
MAIN MENU
SET TIME
MONDAY PROGRAM
HEAT
COOL
WAKEꢀ 06:30Aꢀ
MORNꢀ 08:30Aꢀ
70.0ꢀ 78.0
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
The heating setpoint for the first event will be highlighted. Use the UP or
DOWN key to change the desired temperature. Press SET HEAT.
EVEꢀ
04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
MAIN MENU
SET HEAT
MONDAY PROGRAM
HEAT
COOL
The cooling setpoint for the first event will
be highlighted. Use the UP or DOWN key
to change the desired temperature. Press
SET COOL.
WAKEꢀ 06:30Aꢀ
MORNꢀ 08:30Aꢀ
70.0ꢀ 78.0
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
EVEꢀ
04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
MAIN MENU
SET COOL
MONDAY PROGRAM
HEAT
COOL
The second event will now be highlighted.
Use the UP or DOWN key to change events if
desired. When the desired event is highlighted,
press SELECT. Continue programming until all
events are programmed.
WAKEꢀ 06:30Aꢀ
MORNꢀ 08:30Aꢀ
70.0ꢀ 78.0
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
EVEꢀ
04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
MAIN MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
How do I copy one day’s program to another day?
MONDAY PROGRAM
HEAT
COOL
MORNꢀ 08:30Aꢀ
EVEꢀ 04:30Pꢀ
NIGHTꢀ 10:30Pꢀ
62.0ꢀ 85.0
70.0ꢀ 78.0
62.0ꢀ 82.0
In the program screen, press the DOWN button until COPY is highlighted.
COPY
MAIN MENU
SELECT
COPY MONDAY TO
Use the UP or DOWN button to highlight the
day to copy to. Press YES / NO. A YES will
appear next to the day. Do this for each day to
which that program is to be copied. Press
FINISHED when complete.
TUESDAYꢀ
WEDNESDAY
THURSDAY
FRIDAYꢀ
YES
YES
FINISHED
YES / NO
CONTINUE
PROGRAMMING?
After pressing FINISHED, you can choose to pro-
gram other days or exit. YES will take you back to
the Select Program Days screen. NO will exit you
to the main screen.
NOꢀꢀ
YES
Download from Www.Somanuals.com. All Manuals Search And Download.
13
What are the USER settings?
MONDAY
3:29 PM
COOL
The USER SETTINGS can change the way information is displayed on the thermostat and help
to optimize comfort. It’s one way to truly personalize your new thermostat.
FAN AUTO
78.1
SET AT
78
HOLD TEMP
MENU
MENU
BACK
HEAT / COOL
To get to the USER SETTINGS, press the MENU button from the main screen.
DAY / TIME
FAN
USER SETTINGS are below the FAN settings. Use the DOWN button to scroll below the
screen. Press SELECT.
MORE
USER SETTINGS
HOME
SELECT
Choose the setting you would like to change. When the SETTING is highlighted, press SELECT. There are 13 USER
SETTINGS in all as listed below. For detailed information on each user setting, please go to the next page.
USER SETTINGS MENU
OR Cꢀ
USER SETTINGS MENU
USER SETTINGS MENU
USER SETTINGS MENU
HEATING LIMITꢀ
1ST STAGE DIFFꢀ
2ND STAGE DIFFꢀ
2ND DELAYꢀ
1˚F
2˚F
F
˚F
12
COOLING LIMITꢀ
HEATING LIMITꢀ
LANGUAGEꢀ
68˚F
78˚F
78˚F
ENG
L & R
OFF
12 OR 24hrꢀ
LANGUAGEꢀ
20
SHOW SET TEMPꢀ
EVENTS / DAYꢀ
YES
4
ENG
L & R
SENSOR SELECTꢀ
SECURITYꢀ
COOLING LIMITꢀ
45˚F
SENSOR SELECTꢀ
MAIN MENU
MAIN MENU
SELECT
SELECT
SELECT
MAIN MENU
SELECT
MAIN MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
15
16
Detailed Information on the USER SETTINGS (Or what do these USER SETTINGS do?)
To select a USER SETTING, use the UP or DOWN button to highlight the desired value. Press SELECT to select desired value.
TEMPERATURE
˚F
TEMPERATURE: Fahrenheit or Celsius
Temperature will be displayed in F or C.
˚C
USER MENU
CLOCK
SELECT
12 HOUR
24 HOUR
CLOCK SETTINGS
Displays time in standard 12-hour format or military format.
USER MENU
SELECT
DISPLAY SET POINT
TEMPERATURE ?
SETPOINT TEMPERATURE
Each event has a setpoint temperature. Choose whether to display this value or not.
YES
NO
USER MENU
SELECT
SELECT EVENTS / DAY
EVENTS / DAY
4
NUMBER OF EVENTS PER DAY
Select events per day. Choose from 2, 4, or 6 events per day.
0
6
12
18
SELECT
24
USER MENU
Download from Www.Somanuals.com. All Manuals Search And Download.
More Detailed Information on the USER SETTINGS.
DIFFERENTIAL SETTINGS
DIFFERENTIAL SETTING
The temperature differential is your comfort level. A lower differential means your system may
cycle with greater frequency but will control closer to desired setpoint temperature.The second
stage delay is a timed delay to indicate how much time should pass before the second stage is
turned on. This is an energy saving feature. To use less energy, set this higher. For greater
comfort, set it lower.
1ST DIFFꢀꢀ
1˚F
2ND DIFFꢀꢀ
2ND DELAYꢀꢀ
2˚F
20 MIN
USER MENU
SELECT
HEATING and COOLING LIMITS
SET HEATING LIMIT
SET COOLING LIMIT
To prevent individuals (probably your kids) from adjusting the
thermostat too hot or too cold, you can limit the maximum setting
for the heating and cooling modes. This will help you save on
energy costs.
LOWEST COOLINGꢀ
SETTING ALLOWED
45 °F
HIGHEST HEATINGꢀ
SETTING ALLOWED
90 °F
USER MENU
SELECT
USER MENU
SELECT
LANGUAGE SETTING
This screen allows you to choose the displayed language; English, French, or Spanish.
SELECT A LANGUAGE
ENGLISH
ESPANOL
˜
FRANÇAIS
USER MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
17
18
More Detailed Information on the USER SETTINGS.
SENSOR SETTINGS
SENSOR SETTINGS
This screen will appear when a remote indoor sensor (9020i) is connected to the thermostat.
USE LOCAL SENSOR
AVG. LOCAL / REMOTE
USE REMOTE SENSOR
USE LOCAL SENSOR will disable the remote sensor and only sense from the thermostat.
AVG. LOCAL/REMOTE will take a temperature reading from both the thermostat and the remote
sensor and average the two for even temperature control. USE REMOTE SENSOR will disable
the sensor in the thermostat and only control from the remote location.
USER MENU
SELECT
SECURITY
SECURITY SETTINGS
In order to prevent tampering with the program and your desired settings, two levels of security
are available.The first will allow only temporary changes to the temperature. It protects all other
programmed setpoints. The second will restrict changes to EVERYTHING, including temporary
changes to the temperature.
CHANGE TEMP. ONLY
PREVENT ALL CHANGES
USER MENU
SELECT
ENTER SECURITY CODE
FOR TEMPERATURE
SECURITY CODE
In this screen you enter a four-digit code. Use the UP or DOWN button to change the first value,
press SELECT. The second digit will be highlighted. Repeat for all four values. And don’t forget your
code. If you do, you will have to reset the entire thermostat and that will erase all the schedules
you’ve programmed into the unit.
0
0
0
0
USER MENU
SELECT
When would I need to change the USER settings?
About the only features you may need to change are the FILTER INTERVAL (in case you get a new type of high efficiency filter), the
temperature differentials (if you desire additional comfort), and the security settings. All the other settings probably will not need to be
changed.
Download from Www.Somanuals.com. All Manuals Search And Download.
What are the INSTALLER settings?
The INSTALLER SETTINGS are setup during the initial installation. They tell the thermostat how to function with your heating or cool-
ing equipment. The following is a brief overview and discussion of these settings.
INSTALLER SETTINGS
SYSTEM SETUPꢀ GAS
INSTALLER SETTINGS
INSTALLER SETTINGS
AUTOCHANGEOVERꢀ
OFF
SECURITYꢀꢀ
OFF
EERꢀꢀ
ON
CONTACT INFO
SERVICE INT
REMINDERꢀꢀ
RESIDUAL COOLꢀ
LOW BALANCEꢀ
HIGH BALANCEꢀ
60
DEADBANDꢀꢀ
3˚F
45˚F
95˚F
SECURITYꢀꢀ
OFF
RUN
HOME
MAIN MENU
SELECT
SELECT
HOME
SELECT
SYSTEM SETUP
SYSTEM SETUP
Choose the system component which the thermostat will control.
FURNACE
HEAT PUMP
INSTALL MENU
SELECT
1ST STAGE HEATING
GAS / OIL
1st STAGE HEATING
The 9701iand the 9715ican have a gas/oil or electric first stage heating.
Choose the energy source for 1st stage heating.
ELECTRIC
INSTALL MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
19
20
INSTALLER settings (continued)
AUXILIARY HEAT
AUXILIARY HEAT
STANDARD - COMP. =ON
ADD ON - COMP. =OFF
The 9720i can be set to use your 2H/2C heat pump internal auxiliary heating or to use an
external add-on source. The add-on feature will be used most often when a single stage heat
pump uses a gas or electric furnace as its second stage of heating.
INSTALL MENU
SELECT
RESIDUAL COOL
RESIDUAL COOL
SECONDS DELAYꢀ
60
In order to get greater efficiency from the cooling system, the fan can be programmed to run for
0 (OFF), 30, 60, 90, or 120 seconds after the air conditioner has shut off.
INSTALL MENU
SELECT
BALANCE POINTS
BALANCE POINTS
This screen will appear only when the optional outdoor sensor (9025i) is connected to the
thermostat. When this sensor is used with the 9720i,you can set the lower and upper
temperatures to disable or enable 2nd stage heat.
LOW BALANCEꢀ
45 ˚F
HIGH BALANCEꢀ
95 ˚F
INSTALL MENU
SELECT
AUTO CHANGEOVER
AUTO CHANGEOVER
DISABLEꢀ
When turned on, the thermostat will switch automatically between heating and cooling to maintain
the optimal temperature in your home.
ENABLE
INSTALL MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLER settings (continued)
ENERGY EFFICIENT RECOVERY
When turned on, the thermostat will look up to two hours before the next event and anticipate when
to turn on to reach the desired temperature.
ENERGY EFFICIENT
RECOVERY
DISABLE
ENABLE
USER MENU
SELECT
DEADBAND SETPOINT
DEADBAND SETPOINT
Deadband is used with the AUTO CHANGEOVER feature. The deadband is the temperature
difference from the setpoint temperature during which the heating or cooling will not be turned on.
This is adjustable from 2-8°F (1.0-4°C).
3 ˚F
USER MENU
SELECT
SECURITY CODE
Enter a code to prevent changes to the INSTALLER settings.
ENTER SECURITY CODE
FOR INSTALLER
SETTINGS
0
0
0
0
USER MENU
SELECT
Download from Www.Somanuals.com. All Manuals Search And Download.
21
22
CONTACT INFORMATION
This allows the servicing HVAC contractor to put their name and phone number into the thermostat to
remind you when service may be required.
CONTACT INFORMATION
AIR EXPERTS
1-555-555-1212
BACK
EDIT
SERVICE MONITOR MENU
Two menus are available, the Service Monitor and the Filter Monitor. Both can be set based on the HVAC
system run time or calendar based. See Reminder Interval.
SERVICE MONITOR MENU
SERVICE MONITORꢀ 980
FILTER MONITORꢀ
980
The Service Monitor can be set from OFF to 360 Days in 30 day increments or OFF to 980 in 20 hour
increments.
The Filter Monitor can be set from OFF to 360 Days in 30 day increments or OFF to 980 in 20 hour
increments.
INSTALL MENU
SELECT
REMINDER INTERVAL
REMINDER PERIOD
RUN TIME
The Reminder Interval can be set for either HVAC System run time or based on the calendar.
If Run Time is chosen, the service reminder will be set in hours. After the HVAC System has been
operating for the selected number of hours, a Service Reminder will be displayed informing you that
service is suggested for your system.
If Calendar Time is chosen, the service reminders will be set in days. After the selected number of
days has passed, a Service Reminder will be displayed informing you that service is suggested for
your system.
CALENDAR TIME
INSTALL MENU
SELECT
When would I need to change the INSTALLER settings?
NEVER! The INSTALLER SETTINGS are selected based on the type of equipment you have in your home. This feature should be
set only by a certified HVAC technician. Changing these settings could result in higher energy costs and may even damage your
equipment. There is a security lock on this feature to prevent tampering. USE IT!
Download from Www.Somanuals.com. All Manuals Search And Download.
26
When should I change the batteries?
Only the model 9700i operates with batteries. The 9701i, 9715i and 9720i operate from power provided by your
heating/cooling system.
Generally the batteries will last 18-24 months. The thermostat will tell you when to change the batteries. A
battery symbol will appear just below the temperature display. The thermostat will continue to operate for a
short period of time with this notification on the display. The low battery warning supercedes all other notifi-
cations including outdoor temperature and the filter monitor.
MONDAY
11:30 AM
F
HEAT
FAN AUTO
70.0˚
SET AT
71.0˚F
HOLD TEMP
MENU
If the WARNING screen is displayed, the thermostat will shut down all
WARNING: CHANGE
BATTERIES NOW
operations, including heating and cooling. It’s important to change the
batteries promptly if this screen appears.
How do I change the batteries?
Simply slide the battery door to the right. Remove
BATTERIES INSTALLED
the two right most batteries first. Then remove the
INCORRECTLY
two left batteries. The screen to the left will
appear. This screen will help you orient the new
batteries. Replace with four fresh AA alkaline bat-
teries. REPLACEMENT TIP: It’s easier to replace
the two left most batteries first, then the right ones.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
515 South Promenade Avenue
Corona, CA 92879-1736
United States of America
Made in Mexico
Patents Pending
110-1023C
Download from Www.Somanuals.com. All Manuals Search And Download.
|