Model: NB447
Sport Ear Buds with
Modular Cord System
Using Your New Balance Sport Ear Buds with Foldable Head Band
Your New Balance Ear Buds feature a foldable headband for compact storage. Unfold the headband
completely, place it over your head and insert the “L” ear bud in your left ear and the “R” ear bud in your
right ear. Adjust the length of the headband for the most comfortable and secure fit.
Your New Balance Sport Ear Buds were designed with a modular cord
system. We have provided a 15” iPod/iPhone control cable that is
suitable if your music player will be worn in an armband or clipped to your
clothing at chest level. We have also provided a 36” cable that is suitable
if your music player will be clipped to your belt, placed in your pocket or
carried in a fanny-pack. You may connect both cables together in case
you want to control your iPod or iPhone and the 15” cable is not long
enough.
Connect the male headphone plug of the ear buds to the female headphone jack of either the 15” or 36”
headphone cable depending on your wearing preference. Then connect the male headphone plug of the
15” or 36” cable to the headphone jack of your music player. Be sure that the plugs are fully inserted into
the jacks. If the plug is not fully inserted you may only hear sound from one earpiece.
Using the iPod/iPhone Control Cable
Connect the 15” iPod/iPhone cable between your headphones and your iPod/iPhone to perform the
following operations with the remote controller mounted on the cable:
Master Control
Click to Increase
Volume
Click x2 for Next Track
Click x3 for Previous Track
Click to Play/Pause
Click to Decrease
Volume
Press + Hold for iPod
Shuffle VoiceOver
To Do This
Action Required
Activate voice control*
Answer or end a call
Depress the Master Control for 2 seconds
Press the Master Control once to answer call
Press the Master Control again to end call
Ignore an incoming call
Depress the Master Control for 2 seconds
Answer a second incoming call
and place original call on hold
Press the Master Control once to answer second call
Press the Master Control again to return to first call
Answer a second incoming call,
and end original call
Depress the Master Control for 2 seconds
2 low tones will confirm end of original call.
Switch between two calls
Play or Pause
Press the Master Control once to switch between calls
Press Master Control once to Play, again to Pause
Press Master Control 2 times quickly
Skip Track or Chapter Forward
Skip Track or Chapter Back
Press Master Control 3 times quickly
Increase Volume
Decrease Volume
Press the "+" button
Press the " - " button
Activate VoiceOver**
Press and hold the Master Control to hear title and
artist of currently playing song
Navigate Playlists using VoiceOver**
Press and hold the Master Control until tone is heard,
then release. When the name of the desired playlist is
heard, press the Master Control once to select it.
Using the Accessory Cord Winder Clip
Your New Balance Ear Buds are also supplied with a cord winder clip that may be used to eliminate excess
slack in the 36” cable if necessary. If you find that that the 36” cable is too long you can store up to 24” of
cable in the cord winder and then clip the cord winder to your clothing.
Download from Www.Somanuals.com. All Manuals Search And Download.
open the cord winder
using the small tab
under the clip
pass the plug down
and through the cover
pull the cord back up
and over the spool
clip it on and go!
close the cord winder
wrap cord clockwise around the
spool to reach desired length
wind over
20 inches!
Using the Water Resistant Connection Cover
Your New Balance Ear Buds are also supplied with a silicon sleeve that can be used to cover the
connection between the male headphone plug on the Ear Buds and the female headphone jack on the 15”
or 36” cable. Use this connection cover if you routinely use your Ear Buds in extremely wet or damp
conditions.
Stretch the connection cover over the plug of the Ear Buds as shown.
After connecting the male plug of the Ear Buds to the female jack on the
15” or 36” cable. Slide the connection cover down so that it completely
covers the plug and jack connection point to seal out excess moisture.
Safety Information
To protect your hearing, always start listening with the Volume Control of
your music player set to a low level and gradually increase the volume to
a comfortable listening level.
IMPORTANT! Listening at high volume for long periods of time can result
in long-term hearing damage. For your safety, do not use headphones if
they would prevent you from hearing warning sounds, such as while
driving a car or motorcycle, riding a bike, etc.
NOTE: In extremely cold or dry air conditions you may notice a slight
‘tingling’ feeling in your ears when using in-ear headphones. This is the
result of the build-up of static electricity in your body. This is normal and
not an indication of any problem with your headphones.
Download from Www.Somanuals.com. All Manuals Search And Download.
|