Copyright © 1997 by Network Computing Devices, Inc.
HMX, Explora, NCDnet, and NCDware are trademarks of Network Computing Devices, Inc.
Other trademarks and service marks are the trademarks and service marks
of their respective companies.
Part number 9300572 Rev. B
Download from Www.Somanuals.com. All Manuals Search And Download.
Licensed Features
Before installing NCDware, make sure that you have the licenses
required for the optional features in this version of NCDware. The
following features require licenses: Java, NCD Mosaic Browser,
Wireless network computer support, OpenGL, the CompCore video
fast MPEG decoder, Starlight Networks’ StarWorks support,
NCDnet, 3270 Terminal Emulator, Display PostScript (DPS), X
Imaging Extension (XIE), the local Motif Window Manager,
XRemote, and PEX (3D graphics). If you do not already have a
license, contact Sales Support at (650) 694-0650.
NCDware Contents
NCDware provides X servers and support files for the HMX, Explora,
Explora Pro, Explora 400/ 450 series, and Explora 700 network
computers, also called NCD terminals. In this release, binaries of
host-based software are provided for the following UNIX host
platforms:
❏
❏
❏
❏
❏
❏
SPARC—SunOS versions 4.1.3 to 4.1.4
SPARC—Solaris 2.5
x86—Solaris version 2.4
HP Precision Architecture—HP-UX version 10.01
IBM RS/ 6000—AIX version 4.1
SGI—IRIX version 5.3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
This release supports NCDware on a WinCenter server running
WinFrame 1.6 or later.
NCDware is provided on CD-ROM and PCMCIA cards.
Installing NCDware on UNIX Systems
The procedure in this section describes how to install NCDware on
the host and configure terminals to be used on the network.
For information on modifying or removing terminals from the
network, see the System Administrator’s Guide for UNIX Systems.
ncdinstall installs NCDware and configures terminals on most UNIX
systems.
Note
If you are not sure if you can use ncdinstall on your UNIX
host, follow the installation instructions from Step 1
beginning on page 6 through Step 6 on page 8. After you
complete Step 7, a message displays if ncdinstall cannot run
on your system. For information about manual installation,
call NCD Technical Support.
ncdinstall performs the following:
❏
Examines the host system to ensure sufficient disk space. For
information on space requirements, see the Release Notes or the
file SIZES on the CD-ROM.
❏
Examines the host system to ensure that required
communication and login software is running. If requested, the
installation program enables the software.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
❏
Installs X servers; server modules containing local clients,
extensions, libraries, and protocols; host system executables
and fonts; color database; X keysym database; and
configuration files (listed in the Release Notes).
❏
❏
Starts the license management software and adds startup
commands to the host startup files.
Configures terminals on the network, updating network and
host databases to include required addressing information. On
UNIX systems, ncdinstall saves the original network and host
database files with the extension _O.
Preparing to Configure Terminals Using ncdinstall
Before you install NCDware and configure your terminals, you
need:
❏
❏
❏
❏
A host system with access to a CD-ROM drive.
Super-user access privileges.
Approximately 10 minutes to install NCDware.
Terminals set up and attached to the network (see terminal
installation booklets for instructions).
❏
❏
An empty directory. During installation certain files are
installed in this directory.
Information about the terminals you will be adding to the
network. Set up a table that lists the following information for
each terminal before you start the installation program.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminal model The terminal model name, such as HMX,
Explora, Explora Pro, Explora 400/ 450
series, or Explora 700.
Ethernet address A physical identifier placed in NVRAM in
the factory and printed on a sticker on the
bottom of the terminal base or the outside
of the carton containing the base. It is a
12-character string beginning with 0000A7.
Example: 0000A7123608
Name
(node or
hostname)
The terminal’s node or hostname; a unique
node name consisting of alphanumeric
characters that you assign to the terminal to
correspond with its IP or node address.
Example: crocushmx
Internet address A 4-part, 32-bit address assigned by the
(IP address)
system administrator identifying the
network and terminal.
Example: 139.43.193.93
Subnet mask
A 4-part, 32-bit mask used to distinguish
the subnet from the rest of the IP address.
Example: 255.255.255.0
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Gateway
The IP address of the gateway device. You
need to supply a gateway address only if
the terminal is on a different subnet from
the host computer.
Licensed
features/ node
licenses
If you are using node-locked licenses for
any licensed features, you need to know the
12- or 16-character license string for each
licensed feature. If you do not have a
license, contact Sales Support.
Using ncdinstall
The instructions that follow include samples of common UNIX
management utilities used while installing NCDware. The syntax on
your host may vary; check your host documentation for specifics.
Prepare to Run ncdinstall
1. Log into the host as super-user.
2. Place the CD-ROM in the drive.
3. If you do not already have one, make a directory as a mount
point for your CD-ROM:
# mkdir /cdrom <CR>
4. The following instructions for mounting the CD-ROM vary
depending on the host and the CD-ROM drive configuration.
Substitute your device name for /dev/cdrom.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
❏
❏
On SunOS, mount the CD-ROM:
# mount -r -t hsfs /dev/cdrom /cdrom <CR>
On Solaris hosts not running the Volume Management
daemon, mount the CD-ROM:
# /etc/mount -F hsfs -r /dev/cdrom /cdrom <CR>
Note On Solaris systems running the Volume Management
daemon, you do not need to run the mount command. The
CD-ROM is automatically mounted onto /cdrom/cdrom0
instead of /cdrom. When you run the ncdinstall command
(Step 6 of this procedure), use /cdrom/cdrom0 instead of
/cdrom.
❏
On HP-UX mount the CD-ROM:
# mount -t cdfs -r /dev/cdrom /cdrom <CR>
On AIX, use SMIT to mount the CD-ROM on /cdrom.
On SGI hosts not running the Media Monitor daemon,
❏
❏
mount the CD-ROM:
# mount -rt iso9660 /dev/cdrom /cdrom <CR>
Note On SGI hosts running the Media Monitor daemon, you do
not need to run the mount command. The CD-ROM is
automatically mounted on /cdrom.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Start ncdinstall
5. Make an empty install directory and change to it. For example:
# mkdir /home/ncd/rel_ver <CR>
# cd /home/ncd/rel_ver <CR>
where rel_ver is the release version, such as 5.0.124.
6. Start ncdinstall.
❏
On SunOS, Solaris, or SGI, type:
# /cdrom/ncdinstall <CR>
On HP-UX or AIX:
❏
a. Look at the CD-ROM listing to determine how the case
and spelling of ncdinstall appears; in some cases it is
spelled differently (such as NCDINSTA.\ 1;).
b. Type:
# /cdrom/cd-rom_name -map <CR>
where cd-rom_name is the listing for ncdinstall found on the
CD-ROM.
Throughout ncdinstall, you can use the following commands:
q
m
t
h
!
Quit from ncdinstall
Go to Main Menu
Go to the top of the current submenu
Display Help
Enter a subshell; type exitto return to ncdinstall
Every time you run the program, ncdinstall adds information
about the session, such as the status of system services, to a
8
Download from Www.Somanuals.com. All Manuals Search And Download.
chronological record in the file /home/ncd/rel_ver/.installlog, where
rel_ver is the release version, such as 5.0.124.
Note
If you run ncdinstall with the -s option, it performs a
staging installation, which is useful if you have a CD-ROM
drive on one workstation, but want to install NCDware on
another workstation. The staging installation places the
entire contents of the CD-ROM in the current directory, but
does not change system files or install software in system
directories. Then you can install NCDware from the staging
directory by mounting that directory on another host and
running ncdinstall from the mounted staging directory to
install NCDware into an empty directory.
Install NCDware
7. From the MainMenu,select 1InstallNCDware.
8. From the InstallNCDwaremenu, select 1CD-ROM. If you are
installing from a staging directory and want to install on another
workstation, select 2Disk.
9. Confirm the location of the NCDware distribution (such as
/cdrom). Press the Return key (<CR>) at the prompt to accept the
default.
You can press the Return key at most ncdinstall prompts to select
the default, which appears in brackets following the prompt (for
example, [/cdrom]).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Select the file groups you want to install. To install all groups,
type allat the prompt.
11. Supply the terminal models for which you are installing X
servers. Type the number of each model you are installing from
the options listed. Separate the numbers by spaces.
For example:
Enter the numbers of the NCD terminal models to
install, separated by spaces: 1 2 <CR>
12. If you are installing host system executables, ncdinstall assumes
you want to install executables for the host on which you are
installing NCDware and offers it as the default. You also have
the option of installing executables for hosts other than the one
on which you are installing NCDware.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
13. If NFS is running on the host, specify the file service method you
want to install. If NFS is not running on the host, go to Step 14.
If you select NFS and install on a local file system, ncdinstall
exports the file system for you. If you select NFS and install on a
remote or NFS-mounted file system, you must export the file
system from the remote host. Use the df command to determine
if your file system is local or remote.
Note
For full functionality of the NCD Mosaic Browser, select
NFS as the file service. If you select TFTP as the file service,
some browser features are not available. Refer to the
System Administrator’s Guide for UNIX Systems for further
information.
14. Before beginning the installation, ncdinstall checks available disk
space in the TFTP directory. If space is inadequate, ncdinstall tries
to install in the installation directory. If the installation directory
has enough space, ncdinstall relocates the TFTP directory to the
installation directory. If there is not enough room in the
installation directory, ncdinstall reports how much space is
available and how much more is needed.
Select whether you want to continue anyway (which usually
results in an unsuccessful installation); or press tto return to the
Install NCDwaremenu to select to install fewer files; or press
qto quit to free enough space for the installation.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
15. After confirming sufficient space, ncdinstall lists the file groups
you selected to install and the directories where they will be
installed. If the directories do not exist, ncdinstall creates them.
Verify that ncdinstall should proceed by pressing Return.
ncdinstall installs the following:
❏
❏
X servers in /tftpboot
Server modules in /tftpboot/modsmodel, where model is the
terminal model, such as modshmx
❏
❏
Host executables in /home/ncd/rel_ver/hostside/host, where
rel_ver is the release version, such as 5.0.124, and host is the
host, such as SunOS. /usr/bin/X11/ncd is linked to
/home/ncd/rel_ver/hostside/host. The license management
binaries (ncdlicense, ncdlmd, and lmgrd) are installed in
/usr/bin/X11/ncd.
Configuration files (ncd_std and an example configuration
file), keysym and color databases, and login-related files in
/usr/lib/X11/ncd. (If you are running secure TFTP, ncdinstall
places the files accessed using TFTP, including X servers,
fonts, and configuration files, under the secure TFTP
directory.)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare Host Services for Terminal Booting
16. From the Main Menu, select 2PrepareSystemServices.
ncdinstall checks that BOOTP, TFTP or NFS, a login service, and the
license management services are available. If any service is not
running, ncdinstall attempts to start it.
17. If the file access method is NFS, specify whether you want to
install the NCD Display Manager (ncddm). Type nfor no or press
Return for yes.
The NCD Display Manager provides user ID, group ID, and
environment information to the NCD Mosaic Browser.
Add Terminals to the Network
18. From the MainMenu,select 3ConfigureNCDTerminals.
19. From the ConfigureNCDTerminalsmenu, select
1AddNCDTerminal.
20. Supply the model, IP address, Ethernet address, hostname,
subnet mask, and gateway for each terminal you are installing.
21. Verify your input and correct any errors.
22. Specify whether you want to use the terminal as an NFS server
(type yfor yes or press Return for no).
23. Specify whether you want to export a local file system on a
floppy drive or a PCMCIA card or both. Type 1to export a
PCMCIA card file system, 2for a floppy file system, or allfor
both.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
24. Specify whether you want to license an optional feature. If you
are not using node-locked licenses, press Return and go to Step
25. If you are using node licenses, answer the following:
a. Type yto indicate you want to use an optional licensed
feature.
b. Enter the 12- or 16-character license string and press Return.
c. Type yto indicate you want to license another optional
feature or press Return to continue.
ncdinstall alters the /etc/bootptab and /etc/host files, saving old
files with an extension _O, and installs two configuration files
per terminal.
25. After adding all the terminals, type qto exit ncdinstall.
Caution
Before booting terminals on a Token-Ring network, you must set
the terminals’ Token-Ring speed to match that of the Token-Ring
network. For instructions, see the System Administrator’s Guide for
UNIX Systems.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing NCDware on WinCenter Systems
The procedure in this section is required for NT-only networks. If
your NCD network computers (also called terminals) are on an
NT-only network, you need to install NCDware on a WinCenter
server so it can act as a boot server for the NCD terminals.
The instructions below describe how to install NCDware on a
WinCenter server running WinFrame 1.6 or later. For information
about WinCenter, see WinCenter product documentation. For
additional information about using and configuring NCDware, see
NCDware documentation.
Using setup
To install NCDware you need:
❏
A WinCenter server equipped with a CD-ROM drive and running
WinFrame 1.6 or later
❏
Approximately 10 minutes for the installation
Note
For information on space requirements, see the Release
Notes or the file SIZES on the CD-ROM.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
To install NCDware:
1. Place the NCDware CD-ROM in the CD-ROM drive.
2. To run setup, choose one of the following:
❏
From the menu bar, select File ⇒ Run. Then type
d:\WINNT\setupand press Return (where dis the
CD-ROM drive).
or
❏
Double click on the File Manager and select the CD-ROM
drive. Select \WINNT\setup.exefrom the files listed.
The NCDware License Agreement appears.
3. Read the license agreement and select Yesto accept the license
terms.
If you select No, the Exit Setup dialog box appears. Select
Resumeto go back to the license agreement. Select Exit
Setupto quit.
4. The Select Components dialog box appears, listing the
components you can install. The default selection, Prepare
SystemServices, installs the file transfer software (TFTP) and
the address discovery services (BOOTP) needed for NCDware.
Note
Throughout the installation procedure a selected item is
designated by a box with an xinside. Click on the box to
clear the selection or click on an empty box to select an
item.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
5. The Select Services dialog box appears. The default selections
are TFTPDand BOOTP. Select Nextto accept the defaults.
If your system has another version of TFTP installed, you are
prompted to make the following choice:
❏
❏
If you want to use the version of TFTP that you have
installed, or you are using an NFS server, clear the default
selection. Then select Next.
If you want to install NCD’s current version of TFTP software,
select Next.
6. Choose the TFTP root directory path. The default root directory
path is c:\ tftpboot. Type a new path or accept the default. Select
Next.
7. A dialog box reports that the TFTP software is installed and that
you need to restart the computer. You should restart the
computer when you finish installing all of the components.
Select Okto continue the installation.
8. The Select Components Dialog box reappears. Install
NCDwareis the default. Select Nextto install NCDware.
9. Choose the default destination path for installing NCDware,
c:\ tftpboot, or type the path you wish to use. Select Next.
10. The screen displays a list of items to install. Make sure only the
correct items are selected. Select Nextto continue.
11. The screen lists the NCD terminals for which you can install
software. Make sure only the correct terminals are selected.
Select Next.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
12. The screen lists the fonts you can install.
13. Accept the default fonts, select additional fonts, or clear
selected default fonts. Select Nextto continue.
14. The system begins to install the NCDware files. A set of
thermometers appear and an information window names each
file as it is installed. A moving slider graphically displays what
percentage of the installation is complete. Several screens
appear and disappear quickly.
The installation program places:
❏
❏
X servers (Xncdhmx, Xncdxpl, and Xncdxpt) in c:\ tftp_dir
Supplemental X server files in c:\ tftp_dir\ modshmx,
c:\ tftp_dir\ modsxpl, and c:\ tftp_dir\ modsxpt
❏
Configuration files, font files, and supplemental files in
c:\ tftp_dir\ usr\ bin\ X11\ ncd
where c:\ tftp_dir is the directory selected in Step 6.
When the process is complete, the Select Components screen
reappears with the default selection of Configure
Terminals. Select Nextto install the NCDware files needed
for starting NCD terminals.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
15. The screen displays the configuration files you can select to
install:
❏
Select Standard NCDware(for UNIX and WinCenter use)
for devices running on mixed NT/ UNIX networks.
❏
Select WinCenter onlyfor NT-only networks.
Select Nextto install the appropriate configuration files.
16. The Select Components dialog box appears. Choose Quitand
select Nextto exit setup.
17. The Restarting screen appears. You must restart the system to
use TFTP. Select whether you want to restart your computer now,
or at a later time and select OK.
18. Remove the NCDware CD-ROM from the drive.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
For More Information
See the NCDware Release Notes, the System Administrator’s Guide for
UNIX Systems, or the WinCenter documentation for information
about terminal and host configuration.
In Case of Trouble
If you encounter difficulties, send e-mail or a FAX to NCD Technical
Support or contact them by phone.
For information on services available from NCD Technical Support,
contact your NCD representative or send e-mail to info@ncd.com.
Sending E-Mail or Faxes to Technical Support
NCD Technical Support uses an automated system for e-mail. Send
e-mail to the Internet address support@ncd.com, or send a fax to
(503) 641-2959. To ensure that your e-mail is answered quickly,
please follow the instructions and use the format recommended in
the System Administrator’s Guide for UNIX Systems and the
WinCenter documentation.
You can also submit a request through NCD Web Services. Go to
http://www.ncd.com to reach the NCD Terminal Software Support
home page.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Phoning Technical Support
You can also phone (800) 800-9599 and ask for Technical Support. Be
prepared with the following information when you call:
❏
❏
❏
❏
❏
❏
❏
Model name of the terminal.
Release of NCDware you are running.
Release of WinCenter you are running.
Host system you are on.
Hardware configuration of the WinCenter server, if applicable.
Operating system running on your host system.
Release of the X Window System you are running on the UNIX
host.
❏
If the problem involves a third-party application, the name of
the application and which version you are running.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|