Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
V. About ......................................................................................... 24
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
3
YML785 Rev1
INTRODUCTION
Congratulations on your purchase of the NP642 108Mbps IEEE 802.11g Wireless PCI
Card.
This manual is designed to help familiarise users with the product and offers detailed
operational and installation instructions, so please keep it for future reference.
With the NP642 Wireless (IEEE 802.11g) PCI Card, a computer can communicate
with the Network wirelessly. User-friendly utility software is bundled with the NP642
providing configuration, monitoring and diagnostic options.
The NP642 provides data transfer rates of up to 108 Mbps, which is 10 times faster than
most existing Wi-Fi wireless networks.
Designed to handle bandwidth-intensive applications and multimedia content, the NP642
eliminates the need for unsightly ethernet cables while providing fast and secure network
transfer rates.
The NP642 has the most advanced security features available today with 128 bit WEP
encryption and WPA security.
The Wireless PCI Card configuration is easy to configure for peer-to-peer networks,
suitable for a small number of users, or for full infrastructure networks that allow broad
area roaming.
4
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Wireless Terminology
Wireless Standards
802.11, 802.11b and 802.11g all refer to a series of standards which govern a
common method of creating wireless local area networks (WLANs).
802.11b and 11g are the most common WLAN types, with 11g being the later and
faster of the two standards with a maximum transmission rate of 54Mbps.
The NP642 is faster again as it is built around a processor which ‘turbo-charges’
transmission rates up to 108Mbps.
802.11g is ‘backward compatible’ with 802.11b, which means that the two
standards are able to communicate, albeit at the lower 11Mbps rate of the 11b
standard.
The NP642 can communicate with both kinds of device at their maximum rate,
and with other ‘turbo-charged’ devices at the much higher rate of 108Mbps.
Wireless Security Terms
The Advanced Features of the NP642 include the ability to select from several
types of Wireless Security.
WEP
WEP stands for Wired Equivalent Privacy. Introduced
with 802.11b, WEP uses encryption to protect data
confidentiality by way of pre-shared keys (passwords or
pass-phrases) that are entered at both ends. Superseded by
WPA and 802.11i but still in use.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
5
YML785 Rev1
WPA
WPA stands for Wi-Fi Protected Access - authorizes and
identifies users based on a secret key that changes automatically
at a pre-defined interval. This is called TKIP (Temporal Key
Integrity Protocol) to change the temporal key every 10,000
packets (= unit of data.) Keys can either be pre-shared or
established by a RADIUS Server.
RADIUS
RADIUS is part of 802.11i security; this is a wireless standard
which is only concerned with wireless security standards.
Authentication is based around a secure server with a challenge-
and-response method of interaction which verifies the identity
of the client wishing to connect to the network. If you wish to
connect to a RADIUS server ask the Network Administrator for
details. RADIUS servers are not usually used as part of home
networks.
6
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
System Requirements
•
•
•
•
•
Desktop computer with available 32bit PCI slot.
Windows 98SE, ME, 2000, XP
32Mb of memory and a 300MHz processor
20Mb spare disk storage
CD-ROM Drive
Caution
The NetComm NP642 must be installed and operated in accordance with
the instructions provided in this Quick Start Guide. Damage caused by
incorrect or careless installation is not covered by warranty.
Static Electricity
Computers are very sensitive to static electricity which may be discharged
by the user when the internal circuitry is touched. Ensure that you have
discharged any static prior to touching the computer’s PCI slots and
to removing the NetComm NP642 from its static bag, by touching an
earthed object first. This can be the computer’s Power Supply provided
the power is switched off at the wall, but the power cord is connected to
the power socket; static will be discharged through the power cord’s earth
connection.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
7
YML785 Rev1
GETTING TO KNOW YOUR NP642
This chapter provides unpacking and setup information for the NP642 Wireless PCI Card.
Package Contents
Open the box of the Wireless PCI Card and carefully unpack it. The box should contain
the following items:
�
�
One 108Mbps 802.11g Wireless PCI Card
with removable antenna
One Installation CD, including Utility
Software and User Guide.
If any item is found missing or damaged, please contact your local reseller for
replacement.
8
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
NP642 LED Indicators
LED Indicator
Description
Power (PWR)
The PWR indicator lights green to indicate that it is receiving
power from the PCI slot. If the PWR indicator light is off, it is not
receiving power.
ACT (Activity)
The ACT indicator blinks green while the Wireless PCI Card is
transmitting data.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
9
YML785 Rev1
HARDWARE INSTALLATION
PCI Card Installation Instructions
1. Shut down the computer, unplug the power cord, and remove the chassis cover.
2. Insert the contact edge of the Wireless PCI Card into the available PCI Bus Master
Expansion slot. Press the card firmly into the connector so that the card’s contacts are
fully seated in the PCI slot connector.
3. Install the bracket screw and secure the card to the computer chassis.
4. Replace the computer’s cover.
5. Switch the computer power on. Windows will display a ‘Found New Hardware’ dialog
box. Click Cancel to dismiss and proceed with installation of the driver from the CD-
ROM as described on Page 11, after attaching the antenna.
10
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Connecting the Antenna
Before continuing with the Software Installation section, you will need to connect the
antenna
1. The antenna has a retaining nut which must be screwed into the connector on the back
of the card. Place the screw retaining nut over the antenna connection on the rear of
the NB642 and turn it clockwise.
Screw
retaining nut
clockwise
over the
Bend
antenna
antenna
connection
to a 90o
angle
Note:
Do not over-tighten the attaching nut - but do make sure that
you have screwed it all the way to its end.
o
2. Adjust the antenna to a 90 angle.
Note:
Please note that you may have to rotate the complete antenna
assembly to do this and have the antenna pointing vertically.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
11
YML785 Rev1
SOFTWARE INSTALLATION
This section will guide you through the driver and utility installation procedure for the
NP642 Wireless PCI Card.
Windows 98se/ME/2000/XP Utility and Driver Installation
1. Insert the Driver and Utility CD-ROM into the CD-ROM Drive. The driver and util-
ity setup menu should start up and install the driver. Depending on your operating
system, you may need to install the software manually. Go to your Windows start
menu and select “Run”. Type “D:\Utility\Setup.exe” in the dialog box (where D:\ is
the letter of your CD-ROM drive) and click OK.
2. If you need to install the driver manually, refer your Windows Operating System,
(OS) to the following CD-Rom directory path: D:\Driver\<Windows OS>\net5211.inf
(where D:\ is the letter of your CD-ROM drive).
3. The Install Shield Wizard screen will appear. Click “Next” to continue.
4. The installation program will help you setup the Wireless PCI utility.
Windows XP has its own Wireless Utility. You can either use the Windows XP utility
or the provided utility.
5. Once the Wireless PCI Card is installed you will find a new icon on the Windows task
bar. The colour of the icon represents the strength of the wireless signal.
12
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Icon
Description
If the Icon is completely Green, you have excellent coverage and
performance.
If the icon is yellow, the signal strength has a fair coverage and
performance.
If the icon has no colour, signal strength is poor.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
13
YML785 Rev1
USING THE WIRELESS UTILITY
I. Link Information
Launch the utility program by double clicking the utility icon in the Windows task bar.
The following window is displayed after launching the Utility program.
Field
Description
Status:
Shows the BSSID (or Mac address) of the adaptor, which can be
used to identify it on the wireless network.
SSID:
Shows current SSID, which must be the same for the all wireless
devices in order for communication to be established.
Frequency:
Shows the current frequency used for the wireless network.
14
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Field
Description
Wireless Mode:
Shows the current wireless mode used for wireless
communication.
Encryption:
TxRate:
Shows the current encryption mode used in the wireless network.
Shows the current data rate used for transmitting.
Shows the current communication channel.
Channel:
Link Quality:
Shows the link quality of the NP642 Wireless PCI card with the
Access Point when operating under Infrastructure mode.
Signal Strength:
Data Rate:
Shows the strength of the wireless signal between the NP642
Wireless PCI card and the Access Point.
Shows the statistics of the data transfer rate. The calculation is
based on the number of packets transmitted and received.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
15
YML785 Rev1
II. Configuration
The configuration page enables you to set the basic parameters for your connection.
Field
Description
SSID:
Service Set Identifier, which is a unique name shared among
all clients and nodes in a wireless network. The SSID must be
identical for each client and node in the wireless network. Give
your network a name which you will remember but which does
not obviously identify it to the outside world.
Wireless Mode:
There are two types available for selection:
●
Infrastructure – to establish wireless communication with
the LAN and other wireless clients through the use of Access
Points.
16
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Field Description
●
Ad-Hoc – to establish peer-to-peer wireless communication
directly with other wireless client devices such as other
computers with wireless cards.
Ad-Hoc Band:
Channel:
There are three bands available for selection- 11B, 11G and 11G
Turbo. Choice depends on the type of wireless equipment you
wish to connect to. Check the documentation of the associated
equipment to verify details.
The channel value that the PCI card will operate in. Australian
Users should select the Channel Range 1-13 and all stations
on the WLAN need to be on the same channel if they are to
communicate.
Tx Rate:
Select the data rate for data transmission.
There are 3 modes to choose from:
Power Mode:
●
●
●
Continuous Access Mode (default) – the PCI card is
constantly operating with full power and it consumes the most
power.
Maximum Power Save – the PCI card consumes the least
power and only operates when there is wireless network
activity.
Power Save – the PCI card consumes a moderate level of
power.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
17
YML785 Rev1
Field
Description
Preamble:
Select Long Preamble or Short & Long Preamble type. Leave as
default unless advised otherwise by your Network Administrator.
Support Band:
There are three functions for you to select, including 11B, 11G and
eXtended Range. The default setting is 11B, 11G and eXtended
Range enabled, which is interoperable with both 11B and 11G
devices, and provides a connectivity range of 500m.
Note:
You must select at least 11B or 11G to support your wireless
connection.
18
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
III. Advanced
In the Advanced page you can configure advanced settings for the NP642 wireless PCI
Card
Field
Description
Encryption:
There are four options available: Disable (WEP), Enable
(WEP), WPA and WPA-PSK. The default setting is set to
“Disable”. Enable and Disable refer to WEP data encryption
feature. If Enable is selected, you will be required to select the
Authentication mode from the drop down list. If WPA is selected,
configuration is enabled. Select the “configuration” button.
You will then be prompted with the following pop up window.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
19
YML785 Rev1
Select the certificate that you wish to use and enter the server
name and login name; this refers to RADIUS Server technology
which is generally not in use in the home environment; check with
your Network Administrator if you are required to enter this in
order to log on to a secure network.
If WPA-PSK is selected, click the configuration button. You will
then be prompted with the following pop up window.
20
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Field
Description
Please enter a key. If you are joining an existing network, ask the
Administrator for the key. If you are setting up the network, create
a key; any combination of letters and numbers up to 32 characters
with no spaces.
Auth. Mode:
There are three modes available to choose from:
•
Open Authentication – the sender and receiver do not share
a secret Key for communication. Instead, each party generates
its own key-pairs and asks the other party to accept it. The key
is regenerated when the connection is established every time.
Shared Authentication – the sender and receiver shares the
common key for data communication, and the key is used for
extended length of time.
•
•
Auto – requires communication to be established, and
automatically use the proper authentication mode.
The following will only be activated to allow for configuration
when Encryption is enabled.
Default Key:
Select one of the 4 keys to use.
Network Key:
Choose the encryption, either in HEX or ASCII formats, and enter
the password in the blank space.
Key Length:
Key Format:
Select 64 or 128 bits as the length of the keys
ASCII or HEX
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
21
YML785 Rev1
IV. Site Survey
This page allows you to enable the site survey function, which scans for available wireless
networks (wireless clients & access points) and establishes a wireless communication
with one.
Field
Description
Available Network: Displays the wireless networks (wireless clients and Access
Points) that are in your signal range.
Select any one of them to establish communications by simply
double-clicking or by clicking on the “Connect” button.
Click the “Refresh” button to start scanning for available networks
again.
22
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Field
Description
Profile:
You can create and manage profiles for Home, offices or public
areas. Double-Click on one of the created profiles. The settings
will adapt to the configuration such as SSID, channel, and WEP
settings saved by that particular profile.
Remove:
Properties:
Add:
To remove the selected profile
To view and change settings.
To add a profile. You will be prompted with the following popup
screen. You can enter the necessary information required for
accessing Access Points or Wireless Router.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
23
YML785 Rev1
V. About
This page displays some information about the NP642 Wireless PCI Card. It contains the
Driver & Utility Version as well as the MAC address. This feature is useful when you
need to identify utility and driver versions as updates become available.
24
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
APPENDIX A: Glossary
Access Point:
An internetworking device that seamlessly connects wired and
wireless networks.
Ad-Hoc:
An independent wireless LAN network formed by a group of
computers, each with a network adapter.
AP Client:
One of the additional AP operating modes offered by a 54Mbps
Access Point, which allows the Access Point to act as an Ethernet-
to-Wireless Bridge, thus a LAN or a single computer station can join
a wireless ESS network through it.
ASCII:
American Standard Code for Information Interchange, ASCII, is one
of the two formats that you can use for entering the values for WEP
key. It represents English letters as numbers from 0 to 127.
Authentication Type:
Indication of an authentication algorithm which can be supported by
the Access Point.
1. Open System: Open System authentication is the simplest
of the available authentication algorithms. Essentially it is a null
authentication algorithm. Any station that requests authentication
with this algorithm may become authenticated if 802.11
Authentication Type at the recipient station is set to Open System
authentication.
2. Shared Key: Shared Key authentication supports authentication
of stations as either a member of those who knows a shared secret
key or a member of those who does not.
Backbone:
The core infrastructure of a network, which transports information
from one central location to another where the information is
unloaded into a local system.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
25
YML785 Rev1
Bandwidth:
Beacon:
The transmission capacity of a device, which is calculated by
how much data the device can transmit in a fixed amount of time
expressed in bits per second (bps).
A beacon is a packet broadcast by the Access Point to keep the
network synchronized. Included in a beacon are information such
as wireless LAN service area, the AP address, the Broadcast
destination addresses, time stamp, Delivery Traffic Indicator Maps,
and the Traffic Indicator Message (TIM).
Bit:
A binary digit, which is either -0 or -1 for value, is the smallest unit
for data.
Bridge:
Browser:
BSS:
An internetworking function that incorporates the lowest 2 layers of
the OSI network protocol model.
An application program that enables one to read the content and
interact in the World Wide Web or Intranet.
BSS stands for “Basic Service Set”. It is an Access Point and all the
LAN PCs that associated with it.
Channel:
The bandwidth which wireless Radio operates is divided into
several segments, which we call them “Channels”. AP and the client
stations that it associated work in one of the channels.
CSMA/CA:
In local area networking, this is the CSMA technique that combines
slotted time -division multiplexing with carrier sense multiple access/
collision detection (CSMA/CD) to avoid having collisions occur a
second time. This works best if the time allocated is short compared
to packet length and if the number of situations is small.
26
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
CSMA/CD:
Carrier Sense Multiple Access/Collision Detection, which is a
LAN access method used in Ethernet. When a device wants to
gain access to the network, it checks to see if the network is quiet
(senses the carrier). If it is not, it waits a random amount of time
before retrying. If the network is quiet and two devices access
the line at exactly the same time, their signals collide. When the
collision is detected, they both back off and wait a random amount
of time before retrying.
DHCP:
Dynamic Host Configuration Protocol, which is a protocol that lets
network administrators manage and allocate Internet Protocol
(IP) addresses in a network. Every computer has to have an IP
address in order to communicate with each other in a TCP/IP based
infrastructure network. Without DHCP, each computer must be
entered in manually the IP address. DHCP enables the network
administrators to assign the IP from a central location and each
computer receives an IP address upon plugged with the Ethernet
cable everywhere on the network.
DSSS:
Direct Sequence Spread Spectrum. DSSS generates a redundant
bit pattern for each bit to be transmitted. This bit pattern is called
a chip (or chipping code). The longer the chip, the greater the
probability that the original data can be recovered. Even if one or
more bits in the chip are damaged during transmission, statistical
techniques embedded in the radio can recover the original data
without the need for retransmission. To an unintended receiver,
DSSS appears as low power wideband noise and is rejected
(ignored) by most narrowband receivers.
Dynamic IP Address: An IP address that is assigned automatically to a client station in a
TCP/IP network by a DHCP server.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
27
YML785 Rev1
Encryption:
ESS:
A security method that uses a specific algorithm to alter the data
transmitted, thus prevent others from knowing the information
transmitted.
ESS stands for “Extended Service Set”. More than one BSS is
configured to become Extended Service Set. LAN mobile users can
roam between different BSSs in an ESS.
ESSID:
The unique identifier that identifies the ESS. In infrastructure
association, the stations use the same ESSID as AP’s to get
connected.
Ethernet:
A popular local area data communications network, originally
developed by Xerox Corp., that accepts transmission from
computers and terminals. Ethernet operates on a 10/100 Mbps
base transmission rate, using a shielded coaxial cable or over
shielded twisted pair telephone wire.
Fragmentation:
When transmitting a packet over a network medium, sometimes
the packet is broken into several segments, if the size of packet
exceeds that allowed by the network medium.
Fragmentation
Threshold:
The Fragmentation Threshold defines the number of bytes used for
the fragmentation boundary for directed messages. The purpose of
“Fragmentation Threshold” is to increase the transfer reliability thru
cutting a MAC Service Data Unit (MSDU) into several MAC Protocol
Data Units (MPDU) in smaller size. The RF transmission can not
allow to transmit too big frame size due to the heavy interference
caused by the big size of transmission frame. But if the frame size is
too small, it will create the overhead during the transmission.
Gateway:
A device that interconnects networks with different, incompatible
communication protocols.
28
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
HEX:
IEEE:
Hexadecimal, HEX, consists of numbers from 0 – 9 and letters from
A – F.
The Institute of Electrical and Electronics Engineers, which is
the largest technical professional society that promotes the
development and application of electrotechnology and allied
sciences for the benefit of humanity, the advancement of the
profession. The IEEE fosters the development of standards that
often become national and international standards.
Infrastructure:
ISM Band:
An infrastructure network is a wireless network or other small
network in which the wireless network devices are made a part of
the network through the Access Point which connects them to the
rest of the network.
he FCC and their counterparts outside of the U.S. have set aside
bandwidth for unlicensed use in the ISM (Industrial, Scientific and
Medical) band. Spectrum in the vicinity of 2.4GHz, in particular, is
being made available worldwide.
MAC Address:
Media Access Control Address is a unique hex number assigned
by the manufacturer to any Ethernet networking device, such
as a network adapter, that allows the network to identify it at the
hardware level.
Multicasting:
Sending data to a group of nodes instead of a single destination.
Multiple Bridge:
One of the additional AP operating modes offered by 54Mbps
Access Point, which allows a group of APs that consists of two or
more APs to connect two or more Ethernet networks or Ethernet
enabled clients together. The way that multiple bridge setups is
based on the topology of Ad-Hoc mode.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
29
YML785 Rev1
Node:
A network junction or connection point, typically a computer or
workstation.
Packet:
A unit of data routed between an origin and a destination in a
network.
PLCP:
Physical layer convergence protocol
PLCP protocol data unit
PPDU:
Preamble:
The ‘preamble’ is a sequence of bits transmitted at 1Mbps that
synchronises wireless transmission within the network. The Short
Preamble and header may be used to minimize overhead and,
thus, maximize the network data throughput. However, the Short
Preamble is supported only by the IEEE 802.11b (High- Rate)
standard and not by the original IEEE 802.11standard; meaning that
stations using Short-Preamble cannot communicate with stations
implementing the original version of the protocol.
PSDU:
PLCP service data unit
Roaming:
A LAN mobile user moves around an ESS and enjoys a continuous
connection to an Infrastructure network.
RTS:
Request To Send. An RS-232 signal sent from the transmitting
station to the receiving station requesting permission to transmit.
RTS Threshold:
Transmitters contending for the medium may not be aware of each
other. RTS/CTS mechanism can solve this “Hidden Node Problem”.
If the packet size is smaller than the preset RTS Threshold size, the
RTS/CTS mechanism will NOT be enabled.
SSID:
Service Set Identifier, which is a unique name shared among all
clients and nodes in a wireless network. The SSID must be identical
for each clients and nodes in the wireless network.
30
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Subnet Mask:
TCP/IP:
The method used for splitting IP networks into a series of sub-
groups, or subnets. The mask is a binary pattern that is matched up
with the IP address to turn part of the host ID address field into a
field for subnets.
Transmission Control Protocol/ Internet Protocol. The basic
communication language or protocol of the Internet. It can also be
used as a communications protocol in a private network, i.e. intranet
or internet. When you are set up with direct access to the Internet,
your computer is provided with a copy of the TCP/IP program just
as every other computer that you may send messages to or get
information from also has a copy of TCP/IP.
Throughput:
WEP:
The amount of data transferred successfully from one point to
another in a given period of time.
Wired Equivalent Privacy (WEP) is an encryption scheme used to
protect wireless data communication. To enable the icon will prevent
other stations without the same WEP key from linking with the AP.
Wireless Bridge:
One of the additional AP operating modes offered by 54mpbs
Access Point, which allows a pair of APs to act as the bridge
that connects two Ethernet networks or Ethernet enabled clients
together.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
31
YML785 Rev1
APPENDIX B: Registration and Warranty Information
All NetComm Limited (“NetComm”) products have a standard 12 month warranty from date of purchase
against defects in manufacturing and that the products will operate in accordance with the specifications
outlined in the User Guide. However some products have an extended warranty option (please refer
to your packaging). To be eligible for the extended warranty you must supply the requested warranty
information to NetComm within 30 days of the original purchase by registering on-line via the NetComm
web site at:
www.netcomm.com.au
Contact Information
If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s
Customer Support Department.
Email:
Fax:
(+612) 9424-2010
Web:
Copyright Information
This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism
or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrieval system
or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the
prior written permission of NetComm Limited. NetComm Limited accepts no liability or responsibility, for
consequences arising from the use of this product. Please note that the images used in this document
may vary slightly from those of the actual product. Specifications are accurate at the time of the
preparation of this document but are subject to change without notice.
NetComm Limited reserves the right to change the specifications and operating details of this product
without notice. NetComm is a registered trademark of NetComm Limited. All other trademarks are
acknowledged the property of their respective owners.
32
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Customer Information
ACA (Australian Communications Authority) requires you to be aware of the following information and
warnings:
(1) This unit shall be connected to the Telecommunication Network through a line cord which meets the
requirements of the ACA TS008 Standard.
(2) This equipment has been tested and found to comply with the Standards for C-Tick and or A-Tick
as set by the ACA. These standards are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio noise
and, if not installed and used in accordance with the instructions detailed within this manual, may
cause interference to radio communications. However, there is no guarantee that interference will
not occur with the installation of this product in your home or office. If this equipment does cause
some degree of interference to radio or television reception, which can be determined by turning the
equipment off and on, we encourage the user to try to correct the interference by one or more of the
following measures:
•
•
•
Change the direction or relocate the receiving antenna.
Increase the separation between this equipment and the receiver.
Connect the equipment to an alternate power outlet on a different power circuit from
that to which the receiver/TV is connected.
•
Consult an experienced radio/TV technician for help.
(3) The power supply that is provided with this unit is only intended for use with this product. Do not use
this power supply with any other product or do not use any other power supply that is not approved
for use with this product by NetComm. Failure to do so may cause damage to this product, fire or
result in personal injury.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
33
YML785 Rev1
Product Warranty
The warranty is granted on the following conditions:
1. This warranty extends to the original purchaser (you) and is not transferable;
2. This warranty shall not apply to software programs, batteries, power supplies, cables or other acces-
sories supplied in or with the product;
3. The customer complies with all of the terms of any relevant agreement with NetComm and any other
reasonable requirements of NetComm including producing such evidence of purchase as NetComm
may require;
4. The cost of transporting product to and from NetComm’s nominated premises is your responsibility;
and,
5. NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury
or damage of any kind, whether direct, indirect, consequential, incidental or otherwise arises out of
events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war,
riot, embargoes, acts of civil or military authorities, fire, floods, electricity outages, lightning, power
surges, or shortages of materials or labour.
6. The customer is responsible for the security of their computer and network at all times. Security
features may be disabled within the factory default settings. NetComm recommends that you enable
these features to enhance your security.
The warranty is automatically voided if:
1. You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;
2. The fault or defect in your product is the result of a voltage surge subjected to the product either
by the way of power supply or communication line, whether caused by thunderstorm activity or any
other cause(s);
3. The fault is the result of accidental damage or damage in transit, including but not limited to liquid
spillage;
4. Your product has been used for any purposes other than that for which it is sold, or in any way other
than in strict accordance with the user manual supplied;
5. Your product has been repaired or modified or attempted to be repaired or modified, other than by a
qualified person at a service centre authorised by NetComm; and,
6. The serial number has been defaced or altered in any way or if the serial number plate has been
removed.
34
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
YML785 Rev1
Limitations of Warranty
The Trade Practices Act 1974 and corresponding State and Territory Fair Trading Acts or legalisation
of another Government (“the relevant acts”) in certain circumstances imply mandatory conditions and
warranties which cannot be excluded. This warranty is in addition to and not in replacement for such
conditions and warranties.
To the extent permitted by the Relevant Acts, in relation to your product and any other materials provided
with the product (“the Goods”) the liability of NetComm under the Relevant Acts is limited at the option of
NetComm to:
•
•
•
•
Replacement of the Goods; or
Repair of the Goods; or
Payment of the cost of replacing the Goods; or
Payment of the cost of having the Goods repaired.
NP642 IEEE 802.11g PCI Adapter
Download from Www.Somanuals.com. All Manuals Search And Download.
35
YML785 Rev1
Download from Www.Somanuals.com. All Manuals Search And Download.
|