Ripwave™ MX Modem User Guide
TM
For use with all Ripwave MX Modem models
Part Number 40-00382-00
Revision B, Version 1.0, PV1.6
February 10, 2006
Proprietary
All information disclosed by this document is the proprietary property of Navini Networks, Inc. and is protected
by copyright, trademark, and/or trade secret laws. All rights therein are expressly reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
CARE AND MAINTENANCE................................................................................................................30
UPGRADING THE MODEM .................................................................................................................31
ADDENDUM 1: RIPWAVE™-MX MODEM - PC TROUBLESHOOTING....................................33
ADDENDUM 2: END USER SOFTWARE LICENSE AGREEMENT.............................................38
3
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Permissions, Trademarks & Distribution
Copyright© 2001 - 2006, Navini Networks, Inc. All information contained herein and disclosed by this
document is confidential and the proprietary property of Navini Networks, Inc. and all rights therein are
expressly reserved. Acceptance of this material signifies agreement by the recipient that the information
contained in this document is confidential and that it will be used solely for the purposes set forth herein.
Acceptance of this material signifies agreement by the recipient that it will not be used, reproduced in
whole or in part, disclosed, distributed, or conveyed to others in any manner or by any means – graphic,
electronic, or mechanical, including photocopying, recording, taping, or information storage and retrieval
systems – without the express written permission of Navini Networks, Inc.
Navini Networks is a registered trademark. The Navini Networks logo, Zero-Install, Ripwave, and
Unwired by Navini are trademarks of Navini Networks, Inc. Other product and company names
mentioned herein may be trademarks and/or service marks of their respective owners.
Except for the hardware warranty, nothing herein constitutes any representation, warranty,
assurance, or guaranty of any kind.
Because of continuing developments and improvements in design, manufacturing, and deployment,
material in this document is subject to change without notification and does not represent any
commitment or obligation on the part of Navini Networks, Inc.
Navini Networks, Inc. shall have no liability for any error or damages resulting from the use of this
document.
All Navini Networks logos and trademarks are the property of Navini Networks, Inc. Unauthorized usage
is strictly prohibited without the express written permission of Navini Networks, Inc.
© 2001 - 2006 Navini Networks, Inc. All rights reserved.
4
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Safety
To optimize safety and expedite installation and service, read this document thoroughly. Follow all
warnings, cautions, and instructions marked on the equipment and included in this document.
To aid in the prevention of injury and damage to property, cautionary symbols have been placed in this
document to alert the reader to known potentially hazardous situations, or hazards to equipment or
procedures. The symbols are placed before the information to which they apply. However, any situation
that involves heavy equipment and electricity can become hazardous, and caution and safety should be
practiced at all times when installing, servicing, or operating the equipment.
Caution Symbol - possible equipment or property damage
Warning Symbol - could cause personal injury or otherwise be hazardous to
your health
Navini Networks, Inc., expressly requires that when using Navini electronic equipment always follow the
basic safety precautions to reduce the risk of electrical shock, fire, and injury to people and/or property.
1. Follow all warnings and instructions that come with the equipment.
2. Do not use the equipment while you are in a bathtub, shower, pool, or spa. Exposure of the
equipment to water could cause severe electrical shock or serious damage to the equipment.
3. Do not allow any type of liquid to come in contact with the equipment. Unplug the equipment from
the power source before cleaning. Use a damp cloth for cleaning. Do not use any soaps or liquid
cleaners.
4. Follow all airport and FAA regulations when using the equipment on or near aircraft.
5. Only operate the equipment from the type of power source(s) indicated in this manual (110/220
VAC, 60/50 Hz or Navini supplied battery). Any other type of input power source may cause damage
to the equipment.
6. Power the equipment using only the battery or the AC adapter cable provided, and in accordance with
the instructions specified in the User Guide.
7. Do not use a frayed or damaged power cord. Do not place the power cord where it can be stepped on
or tripped over.
8. Do not touch wires where the insulation is frayed or worn unless the equipment has been
disconnected from its power source.
9. Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical shock
5
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
or fire.
Ripwave MX Modem User Guide
10. Do not place the equipment on an unstable surface. It can fall and cause injury or damage to the
equipment.
11. Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and
also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only
an authorized repair technician should service this product.
12. Do not expose the equipment to extreme hot or cold temperatures.
13. Do not use the equipment under the following conditions:
• When the equipment has been exposed to water or moisture.
•
•
•
When the equipment has been damaged.
When the power cord is damaged or frayed.
When the equipment does not operate properly or shows a distinct
change in performance.
Battery Caution & Procedures
WARNING! To reduce risk of injury or fire, follow these instructions when handling a battery.
1. Risk of explosion is possible if the battery is replaced with one not supplied by Navini Networks.
2. Do not dispose of the battery in a fire. It may explode. Check with the local codes for battery disposal
guidelines.
3. Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or
harmful to humans. If battery substances come in contact with the skin, seek medical help
immediately.
4. Do not attempt to recharge the battery by any means except per the instructions in this manual.
5. Remove the battery from the equipment if the equipment is not going to be used for a long period of
time. The battery could leak and cause damage to the equipment.
6. Exercise care when handling the battery to prevent shorting the battery with conducting materials
such as bracelets, rings, and keys.
7. Store the battery pack in a dry place, 0 to +40 degrees Celsius.
8. Dispose of used batteries according to environmental guidelines.
6
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Regulatory Information
FCC Notice
CAUTION: This device is a Radio Frequency transmitter. It is required to comply with FCC RF
exposure requirements for transmitting devices. For all LMX Modems except for the 2.6 LMX
with window mount, a minimum separation distance of 8 inches (20 cm) or more must be
maintained between the antenna and all persons during device operations to ensure compliance
with the FCC’s rules for Radio Frequency Exposure. For the 2.6 LMX Modem with a window
mount, a minimum of 8.3 inches (21 cm) or more must be maintained between the window mount
antenna and all persons during device operations. If this minimum distance cannot be maintained,
exposure to RF levels that exceed the FCC’s limits may result.
FCC Compliance and Advisory Statement
Tested To Comply
With FCC Standards
FOR HOME OR OFFICE USE
This equipment has been tested and found to comply with the limits for a class B digital device,
Pursuant to Part 15 of the FCC rules. The operation is subject to the following two conditions:
(1)
(2)
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause
undesired operation.
If this equipment causes interference to radio or television reception, which can be determined by
turning the equipment off and on, the user should try to correct the interference by one or more of
the following measures:
1)
2)
3)
Reorient or relocate the receiving antenna,
Increase the separation between the equipment and the receiver,
Connect the equipment to an outlet on a circuit that is different from the one to which the
receiver is connected,
4)
Consult the dealer or an experienced radio/TV technician for additional suggestions.
This product has been tested and found to be safe in accordance with the Australian Standard for
Human Exposure to Radiation where the user or other parties are 20 cm or more from the aerial.
INFORMATION TO USER
This device has been authorized as a radio frequency transmitter under the appropriate rules of the
Federal Communications Commission. Any changes or modifications not expressly approved by
Navini Networks could void the user’s authority to operate the equipment.
INFORMATION REGARDING ANTENNAS
This device has three embedded antennas: one upright antenna with approximately 2 dBi gain and
two patch antennas, one on each side of the device. Each patch antenna has approximately 6 dBi
gain.
7
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Congratulations! Your Ripwave™ MX Modem (also referred to as
Introduction
the LMX) is a user-friendly, easy-to-install device that helps you
connect wirelessly to the Internet. It provides complete broadband
Internet access to residential and small office/home office (SOHO)
customers without requiring professional hardware installation.
The Modem also provides portable service. A computer with this
Modem can move from room-to-room, location-to-location, or
even city-to-city as long as there is coverage in the area.
This manual will guide you through the simple process of installing
the Modem and its monitoring software.
Please verify the contents of your Modem package. Your package
should contain the following:
Package
Inventory
• Modem
• Modem AC power adapter
• Ethernet straight cable (for PC-to-Modem connection)
• Ripwave MX Modem User Guide (on CD)
• Ripwave MX Modem Quick Installation Guide
• Navini Diagnostics Installation CD
If you do not find all of these items in your package, notify the
supplier from whom you obtained it.
Your Modem comes in several models. The model indicates the
frequency the Modem will operate in (either the 2.3 GHz, 2.4 GHz,
2.5-2.6 GHz, 3.4 GHz, or 3.5 GHz range). The various models are
detailed on the next page.
Modem Models
2.3, 2.4, 2.5-2.6, 3.4 & 3.5
GHz LMX Modem
8
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Modem
2.3 GHz LMX
2.4 GHz LMX
Model
Frequency Range
Operating
Band
Operating
Frequencies
2305-2360
LMX E
2400-2483
LMX E
2.305 GHz – 2.360 GHz
2.400 GHz – 2.483 GHz
2.500 GHz – 2.686 GHz
3.410 GHz – 3.525 GHz
3.475 GHz – 3.600 GHz
WCS
ISM
2.5–2.6 GHz LMX 2.5-2.6
LMX E
3.4 GHz LMX
EBS-BRS
WLL
3410-3525
LMX E
3475-3600
LMX E
3.5 GHz LMX
WLL
The “E” in the model name stands for Ethernet. Your computer
should have an Ethernet port for connecting the Modem. An
Ethernet connection will function with any Win32® Operating
System (Windows® 98 or later).
The following table lists the minimum requirements your computer
should meet before connecting to the Ripwave MX Modem.
Minimum
Computing
Operating
System1:
Any Win32 Operating System (OS) - Windows NT,
Windows 982, Windows 98SE2, Windows 2000,
Windows ME2, Windows XP3, or later version.
General Information:
Requirements
(See, also, Addendum 1)
ꢀ Ensure that the pc network port is enabled.
CPU:
Pentium level or higher
RAM:
32 MB or the Operating System minimum,
whichever is greater
Hard Drive: 50 MB free disk space for the Navini Diagnostics
monitoring software4
Monitor:
256 colors, 800 x 600 resolution
1Note: To upgrade your Operating System after loading the Navini Diagnostics
software, you must first uninstall Navini Diagnostics prior to upgrading the OS.
Otherwise, Navini Diagnostics will not work. See Uninstall instructions in this
Guide.
2Note: The Modem must be left powered ON whenever you shut down or restart
any Windows 98 or ME platforms. If the Modem is off, a blue screen appears on
the monitor. In the event that happens you will most likely have to power cycle
the PC.
3Note: Windows XP must be Service Pack Level 1 or higher.
4Note: Navini Diagnostics software is supported on Win98, Win98SE, Win2000,
WinME, WinXP or higher, Mac X (also called Mac10) or higher, or Red Hat
Linux 8.0 or higher. Mac users must have the Snuffit extraction software.
9
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The following figure shows the physical characteristics of the
Modem.
Physical
Characteristics
LMX Modems (2.3, 2.4, 2.5-2.6, 3.4, & 3.5 GHz)
Antenna
Liquid Crystal Display
On/Off Button
Front
Power Adapter Connection
Ethernet Cable Connection
Back
10
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The following instructions explain how to install your Modem.
Please read all instructions before installing the Modem. Also, turn
off the computer and the Modem before installing the Modem.
Installing the
Modem
(See, also, Addendum 1)
Note: The Modem should be positioned to minimize
interference with other equipment when transmitting. Also,
Australian requirements state the Modem should be placed 30 cm
or more from any person or user. If the antenna is closer than 20
cm from the user, Australian safety conditions are violated.
Step Action
Illustration
1.
Connect the Ethernet
cable to the Ethernet
port on the computer.
2.
Connect the other end of
the Ethernet cable to the
Modem.
Ethernet cable
connection
3.
Connect the AC power
adapter to the Modem.
Plug the other end of the
power adapter into a
110/220 VAC 60/50 Hz
outlet.
CAUTION! Use only
the AC power adapter
supplied with the
Power adapter
connection
Modem. Using any other
adapter can damage the
Modem.
11
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Installing the Modem,
continued
Step Action
4. Rotate the Modem’s
Illustration
Antenna
antenna clockwise 180°
to the UP position.
When the antenna is in
the UP position, the
Modem’s liquid crystal
display (LCD) can be
seen.
Liquid Crystal
Display
CAUTION! Rotating
the antenna up in any
other direction can
damage the Modem.
5.
Turn the Modem ON by
pushing the On/Off
button in.
On/Off Button
6.
If the LCD turns on,
proceed to Step 7. If the
LCD does not turn on,
there is a problem with
the Modem or the AC
power adapter. Check all
cables for proper
connection. If there is
still a problem, contact
the supplier who gave
you the package.
Liquid Crystal
Display (LCD)
7.
Turn your computer on
and log in.
12
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Now that your Modem is installed and both the Modem and
Accessing the
Internet
computer are powered on, you should be able to access the Internet
(that is, assuming you have signed up with a Service Provider). To
access the Internet, open the web browser that is installed on your
computer.
Troubleshooting
If you are experiencing difficulties with your Internet connection
after installation, please review the Minimum Computing
Requirements and Addendum 1. Ensure your computer meets those
requirements. Also review the installation procedures and ensure
all the steps were completed properly.
If you are still experiencing difficulties, look at the Modem’s LCD.
The Liquid Crystal
Display (LCD)
The LCD is a text-based display that provides valuable information
about the Modem’s operation. When you use the LCD in
conjunction with the Navini Diagnostics (NavDiag) monitoring
software, you can troubleshoot signal issues, network connections,
and power problems.
Below is a picture of the Modem’s LCD and the various
indications you will see on the LCD.
2
CONNECTED
1
SEARCHING
3
4
S
5
Q
The following table defines the indicators that appear on the LCD.
13
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
The LCD, continued
Ripwave MX Modem User Guide
LCD Indicators:
1
2
SEARCHING: Blinking flash: The Modem is syncing with a BTS.
CONNECTED: The Modem has locked-on to a BTS.
Activity Indicator:
Both arrows flashing: There is traffic activity.
Blank: There is no traffic activity
S: Signal Strength Indicator (SSI)
3
4
0 bars
1 bar
S < 100 dBm
-99 < S ≤ -100 dBm
-96 < S ≤ -99 dBm
-92 < S ≤ -95 dBm
-88 < S ≤ -91 dBm
-84 < S ≤ -87 dBm
-80 < S ≤ -83 dBm
-76 < S ≤ -79 dBm
-70 < S ≤ -75 dBm
2 bars
3 bars
4 bars
5 bars
6 bars
7 bars
8 bars
5
Q: Signal-to-Noise Ratio (SNR)
0 bars
1 bar
Q < 10 dB
10 < Q ≤ -12 dB
13 < Q ≤ -14 dB
15 < Q ≤ -16 dB
17 < Q ≤ -18 dB
19 < Q ≤ -20 dB
21 < Q ≤ -22 dB
23 < Q ≤ -24 dB
Q ≥ 24 dB
2 bars
3 bars
4 bars
5 bars
6 bars
7 bars
8 bars
14
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The NavDiag software assists you in solving connection problems
Installing Navini
Diagnostics
(NavDiag)
and provides other valuable information. This software is provided
on a CD that came in your Modem package. This section explains
how to install this software.
Note: To install NavDiag on a Windows 2000, you must have
administrative privileges. To check your account privileges, open
your Control Panel. Double-click on the Users and Passwords
symbol. You should see Administrator under the Users tab.
Note: The screenshots shown in these instructions were taken
from a laptop with Windows 2000. If you have a Windows 98, XP,
or ME operating system, the screens you see may vary from the
screens shown in the instructions.
Step Action
Illustration
1.
Before installing the
NavDiag software, shut
down all programs,
including anti-virus
software programs.
Insert the Navini
Diagnostics Installation
CD into the CD-ROM
drive.
Open the CD by clicking
on the My Computer
icon. Double-click on
the folder named
2.
3.
Navini_Diagnostics.
Double-click on the icon
for the file
4.
Example:
navdiag_windows.exe*.
This will automatically
start the installation of
the Navini Diagnostics.
*If your PC is running Mac
or Linux software, you will
need the navdiag_mac.sit or
navdiag_linux.bin file. Mac
users will need the Snuffit
extraction software.
15
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Installing NavDiag,
continued
Step Action
Illustration
5.
The InstallAnywhere
window appears. The
progress bar indicates
that InstallAnywhere has
initialized.
6.
The Navini Diagnostics
Language screen
Windows 2000 Screen
appears*. Select a
language and click OK
to continue.
7.
8.
The progress bar
indicates the files being
installed.
Windows 2000 Screen
The Navini Diagnostics
Introduction screen
appears. Click Next to
continue.
Windows 2000 Screen
16
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Installing NavDiag,
continued
Step Action
Illustration
9.
The License Agreement
screen appears. Read the
Licensing Agreement.
Select the I Accept
option, and click Next to
continue.
Note: If the License
Agreement is not
accepted, you cannot
install the software.
The Choose Install
10.
Windows 2000 Screen
Folder screen appears.
Enter the name of the
folder where you wish to
install the software.
Click Next to continue.
Note: The default
installation folder
provided by the software
is shown in the
illustration.
11.
The Choose Shortcut
Folder screen appears.
Select the default, In a
new Program Group,
and click Next to
continue.
Windows 2000 Screen
12.
The Pre-Installation
Summary screen
appears. Review the
contents for accuracy.
Click Install to
Windows 2000 Screen
continue.
For your installation and
computer, this screen
may have different
information than what is
shown in the illustration.
17
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Installing NavDiag,
continued
Step Action
Illustration
13.
The Installing screen
displays as the
application files are
loaded.
14.
At the Install Complete
screen, click Done to
close the window.
Windows 2000 Screen
To open the Navini Diagnostics software application, double-click
on the Navini Diagnostics icon on your desktop.
Troubleshooting
Using Navini
Diagnostics
Navini Diagnostics.lnk
(NavDiag)
The Connection Status screen opens and displays data if the
Modem is in session. The screen refreshes live data every second.
The following sections describe the various parts of the Connection
Status screen.
18
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The icons that appear on the top right side of the screen represent
The Icons
the PC, the connection between the PC and the Modem, the
Modem, the connection between the Modem and the Base Station,
and the Base Station to which the Modem is communicating.
Check marks over the connections indicate working connections.
Connection between
Modem & Base Station
Connection between
PC & Modem
PC
Base Station
Modem
An “X” is positioned over the corresponding icon indicates the
connection between the PC and the Modem or between the Modem
and the Base Station is interrupted.
Signal Strength and Signal Quality are dynamic bar areas that
indicate how well your Modem is receiving signals from the Base
Station.
The Signal
Strength and
Signal Quality Bars
19
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The Signal Strength and
Signal Quality Bars,
continued
In particular, the Signal Strength bar area graphically represents the
strength of the synchronization signal your Modem is receiving
from BTS. The strength of the signal is represented by a group of
colored bars. The higher the pile of bars goes, the stronger the
signal is. The color of the bars also gives an indication of the
strength of the signal. Green lines indicate an excellent signal.
Orange lines indicate a good signal while red lines indicate a weak
signal.
The Signal Quality bar area graphically represents the Signal-to-
Noise Ratio (SNR) received by your Modem. Again, the quality of
the signal is represented by a group of colored bars. The higher the
pile of bars goes, the better the SNR of the signal. The color of the
bars also gives an indication of the quality of the signal. Green
lines indicate an excellent signal or an SNR greater than 21.
Orange lines indicate a good signal or an SNR greater than or equal
to 13 but less than or equal to 21. Red lines indicate a weak signal
or an SNR less than 13.
To increase the strength and quality of the signal, change the
location of your Modem. Try moving it closer to a window, to a
higher location, away from other wireless devices (microwave
ovens, cordless phones), and away from metal objects (shelves, file
cabinets). As you reposition your Modem, watch the Signal
Strength and Signal Quality bars on the NavDiag screen. Place
your Modem in the location where you receive the most green
signal strength and quality bars.
How to Increase
the Strength and
Quality of the
Signal
The History Graphs
The History graphs plot the change in signal strength and signal
quality over time. The graphs cover the last minute and are updated
every second. Read the graphs from right to left. The right side of
the graph represents the most recent status of your Modem.
20
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
At the bottom of the Connection Status screen, are four parameters.
These parameters are BTS ID, Network ID, Active SW Version,
and Standby SW Version.
The Parameters
The BTS ID indicates the BTS to which the Modem is currently
synchronized. The Network ID indicates the network in which the
Modem is operating. Active SW Version and Standby SW Version
indicate the version number of the software currently loaded in the
“active side” and “standby side” of the Modem’s flash memory.
The two letters in parenthesis following the release number
indicate the type of software load: JD indicates Joint Detection,
while EN indicates Enhanced Nulling.
On the left-hand side of the screen, there are five screen option
buttons: Connection Status, Configuration, Trend Analysis,
Statistics, and About. Each of these screens provides unique
capabilities.
The Screen Option
Buttons
The Configuration The Configuration screen enables you to update your Modem’s
software if your Service Provider directs you to do so. To access
the Configuration screen, press the Configuration button.
Screen
If you must update your Modem’s software, your Service Provider
will provide you with instructions regarding what to do.
21
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The Configuration Screen, At the bottom of the screen is an Allow Customer Satisfaction
continued
Reporting box. This box gives you control over whether your
Service Provider is allowed to monitor your Modem’s performance
using the remote CPE Logging function and store the log files
created by the CPE Logging function on your computer. By
default, this box is checked which means the Service Provider can
monitor your Modem.
The Trend Analysis screen lets you view how some Modem
parameters evolve over time. With this screen, you can select up to
three parameters to plot. To view the Trend Analysis screen, press
the Trend Analysis button.
The Trend Analysis
Screen
By pressing the Plot Graph button, the following screen appears.
This screen displays the value of the selected parameters over the
last five minutes and updates once every second. The graphic
scrolls from right to left.
22
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The statistics screen lets you view the current value of selected
parameters. These values are updated as they change over time. To
view the Statistics screen, press the Statistics button.
The Statistics
Screen
The About Screen
The About screen provides vital information such as the version of
the Navini Diagnostics software currently installed on your
computer. It also provides a website address and telephone number
where you can contact your Service Provider. To view the About
screen, press the About button.
A Help button appears on the top right corner of all the NavDiag
windows. The Help button gives you two options. The first option,
On NavDiag, provides help text on the functionality of the
NavDiag program. The second option, About NavDiag, is
equivalent to clicking on the About icon.
The Help Button
23
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
If for some reason you need to uninstall the Navini Diagnostics
software, e.g., to upgrade your Operating System software, follow
the procedure below.
Uninstalling
Navini
Diagnostics
(NavDiag)
Note: The screen shots shown in these instructions were
taken from a laptop with Windows 2000. If you have a Windows
98, XP, or ME operating system, the screens you see may vary
from the screens shown in the instructions.
Step Action
1. On your computer
Illustration
Windows 2000 Screen
screen lower left corner,
click on Start >
Programs > NavDiag >
Uninstall.
2.
The Install-Anywhere
Uninstaller screen
appears. Click
Windows 2000 Screen
Uninstall.
3.
The screen indicates
when the application
files are uninstalled.
Windows 2000 Screen
24
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Uninstalling NavDiag,
continued
Step Action
4. The Uninstall Complete
Illustration
Windows 2000 Screen
screen appears when
finished. Click on Quit
to close the Uninstall
screen.
5.
Restart the PC to
complete the uninstall
process. This ensures the
uninstall process
completes successfully.
Two optional external battery packs are available for your Modem.
These battery packs are the Standard External Battery Pack (S-
EBP) and the Heavy Duty-External Battery Pack (HD-EBP). Both
batteries can be used with any of the LMX Modems.
Optional Battery
Packs
The S-EBP provides 16 Watt-Hours of power while the HD-EBP
provides 44 Watt-Hours of power.
How long the battery packs can operate before recharging varies.
As the table below shows, this time is dependent of the type of
usage you run on your Modem.
Usage
Approximate Hours of Usage Before
Recharge Required
S-EBP
Up to 2.5
1.2
HD-EBP
Up to 8
Approximately 4
Up to 3
Standard
Moderate
Heavy
Up to 1
25
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The optional battery packs are not installed inside the Modem.
Connecting the
S-EBP
Instead they are connected to the Modem. To connect the S-EBP to
your Modem, plug the battery pack’s pig-tail cord into the input
socket located on the back of the Modem.
The Indicator Light
on the S-EBP
The S-EBP has one indicator light that resides on top of the unit.
This light has four states associated with it. The states are
described below.
Battery
LED
Battery
Charger
Modem
Connected
Modem
On/Off
Comments
Connected & Switched Button is
On Lit
Not
Green
Amber
Off
Yes
Yes
No
Not
Battery fully charged.
Battery charging.
applicable
applicabl
e
Not
Not
applicable
applicabl
e
Yes
Yes
Normal. Battery is
supplying power to
Modem. No power is
wasted on the battery
LED.
Red
No
Yes
Yes
Battery is supplying
power to Modem. Battery
is low. 5% charge left.1
Battery is out of power.
Battery LED is off. Status
of battery is unknown.
Off
Off
No
No
Yes
No
No
No
26
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The Indicator Light on the
S-EBP, continued
Note1: As with any battery, when the S-EBP is left unused for
a long period of time, it tends to lose its charge. When this happens
and when the charge drops to approximately 5% of the full charge
level, the red LED comes on to indicate that the battery’s charge
level is low. After a limited duration, the internal circuitry will shut
down both the LED and the battery to prevent the battery from
going into a deep-discharge state. Recharging the battery will
restore it to its normal healthy state.
The S-EBP needs to be recharged when the battery is connected to
a Modem and the Modem is turned on but the LED on top of the
battery remains off (indicating the battery has no power) or is red
(indicating the battery level is low).
Charging the
S-EBP
To recharge the S-EBP, use only the 12V charger that came with
the S-EBP. Using any other charger can damage the battery. To
charge the S-EBP, plug the 12V adapter into the 12V input socket
on the S-EBP.
Note: The battery may charge while it is connected to a
Modem.
Note: Do not attempt to plug the 12V adapter into the Modem
as this can harm the Modem.
27
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
If you have a HD-EBP, the battery pack is installed in the bottom
of the Modem. To install and or remove the battery pack, follow
the steps below.
Connecting and
Disconnecting the
HD-EBP
Step Action
Illustration
1.
Depress the front button
on the battery so that the
front prong moves in
towards the center of the
battery.
2.
Place the back slot of
the Modem over the
back prong of the
battery.
Front slot
Back slot
Front prong
Back prong
Front
button
3.
Place the front part of
the opening on the
Modem over the front
prong on the battery.
Release the button on
the battery.
Press firmly down on
the Modem so that the
Modem firmly connects
with the battery.
4.
5.
28
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Connecting and
Disconnecting the
HD-EBP, continued
Step Action
6.
Illustration
Plug the battery pack’s
pig-tail cord into the
power slot on the
Modem.
7.
To remove the battery
pack from the Modem,
unplug the pig-tail cord.
Depress the front button
on the battery pack. Lift
the Modem off of the
battery pack.
The HD-EBP has one indicator light that resides on the back end of
the unit near the pig-tail cord. This light has four states associated
with it. The states are described in the following table.
The Indicator Light
on the HD-EBP
Battery Battery
Modem
Connected On/Off
Connected & Switched Button is
Modem
Comments
LED
Charger
On
Lit
Green
Amber
Off
Yes
Yes
No
Not
applicable
Not
applicable
Yes
Not
applicable
Not
applicable
Yes
Battery fully charged.
Battery charging.
Normal. Battery is
supplying power to
Modem. No power is
wasted on the battery
LED.
Red
No
Yes
Yes
Battery is supplying
power to Modem. Battery
is low. 5% charge left.1
Battery is out of power.
Battery LED is off.
Status of battery is
unknown.
Off
Off
No
No
Yes
No
No
No
29
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
The HD-EBP needs to be recharged when the battery is connected
Charging the
HD-EBP
to a Modem and the Modem is turned on but the LED on the back
of the battery remains off (indicating the battery has no power) or
is red (indicating the battery level is low).
To recharge the battery pack, use only the 12V charger that came
with the HD-EBP. Using any other charger can damage the battery.
To charge the HD-EBP, plug the 12V adapter into the 12V input
socket on the HD-EBP. Plug the other end of the adapter into an
electrical wall socket.
Pig-tail Cord
Plugs into
Wall Socket
12V Input Socket
Note: Do not attempt to plug the 12V adapter into the Modem
as this may harm the Modem.
Note: The battery may charge while it is connected to a
Modem.
Your Modem is designed to give you years of trouble-free service.
To ensure operation, read the following care and maintenance
instructions.
Care and
Maintenance
ꢀ Keep the Modem free of dust and moisture. If the Modem gets
wet, use a towel to dry it immediately.
ꢀ Handle the Modem gently. Dropping it or mishandling it can
cause damage to the plastic shell or the electronic circuitry.
ꢀ Keep the Modem away from high temperatures. Heat can cause
damage to the plastic shell or the electronic circuitry.
30
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Care & Maintenance, ꢀ Use only a mild detergent and a soft, damp cloth to clean the
continued
Modem. Do not use any chemicals or abrasives to clean the
plastic shell.
ꢀ If there is a problem with the Modem, do not attempt to repair
it yourself. Report the problem to your Service Provider.
ꢀ If you are going to upgrade your Operating System after
loading the Navini monitoring software (Navini Diagnostics),
you must first uninstall the monitoring software prior to
upgrading the OS. Otherwise, the monitoring software will not
work. See Uninstall instructions in this Guide.
ꢀ The Modem must be left powered ON whenever you shut down
or restart any Windows 98 or ME platforms. If the Modem is
off, a blue screen appears on the monitor. In the event this
happens you will mostly likely have to power cycle the PC.
There are three different ways to upgrade the software that makes
the Modem work.
Upgrading the
Modem
ꢀ Your Service Provider may perform an over-the-air (OTA)
upgrade, where the up-to-date software files are transferred
wirelessly from the Base Station to your Modem.
ꢀ Your Service Provider may provide a downloadable web file or
CD-ROM with software to be installed on your PC and used to
upgrade the Modem. This method is used for systems that have
a software release prior to 4.0.
ꢀ Your Service Provider may instruct you to use your Navini
Diagnostics Tool to upgrade your Modem software load. This
method is used for systems that have a software release of 4.0
or greater.
The latter two methods are used only if the Modem was not
powered on during the OTA upgrade process. The OTA upgrade is
normally transparent to the user; in other words, there should be no
noticeable service interruption. The web or CD upgrade comes
with instructions and takes a minimal amount of time to complete.
Note: If you use the Navini Diagnostics Tool to upgrade your
Modem software load, the computer connected to your Modem
31
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
must already have an IP address. If your computer does not have an
IP address, contact your Service Provider. If you attempt to
upgrade your Modem software through the Navini Diagnostics
Tool and the computer does not have an assigned IP address, you
may see one of the following error messages:
32
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
ADDENDUM 1: Ripwave™-MX Modem - PC Troubleshooting
- For Use With All Ripwave-MX LMX Modems and Navini Diagnostics Software -
PC Operating Systems
Prior to installing the Navini Diagnostics software, please check to insure that the PC Operating System
meets the criteria given in the table below. If these criteria are not met, unpredictable problems may
occur as a result of installation. It is recommended that the user have the latest Windowsc updates
installed prior to installing the Navini Diagnostics software.
Operating System
Win95
Win98
Win98, 2nd ed.
WinME
Win 2000
Win NT 3.0/4.0
Win XP
Ethernet interface
Notes
1, 2
2
2
2
2
1, 2
3
Supported
Supported
Supported
Supported
Supported
Supported
Supported
Note 1: Internet Explorer 3.0 or higher is required
Note 2: Requires Service Pack 1
Note 3: To load the Navini Diagnostics software, the user MUST have Administrative privileges.
Ethernet Interface
The Ethernet Modem may be connected to a PC via an Ethernet connection. Also, it is possible to
connect multiple PC devices to a single Modem. The multi-PC configuration is transparent to the PC
users and is analogous to a multi-PC configuration on a normal Ethernet LAN. Check with your Service
Provider if multiple IP addressing is required for your particular configuration. The distinct advantage of
the Ethernet Modem is that it connects to any device that has an Ethernet interface. This makes it ideal
for small businesses that have a mix of devices, such as Unix machines, Apple Computers, etc. IP
addresses can be assigned to the devices dynamically via a DHCP server, or as Fixed IP assignments, or
Point-to-Point Protocol Over Ethernet (PPPoE).
Multiple Interface Environments
When a PC has an internal interface (for example, a Wireless Ethernet interface) in addition to the LMX
Modem, you should do the following:
•
•
If the wireless connection is not required, disable the internal wireless connection
If the built-in wireless connection is required for local networking and wireline Ethernet is used via
the LMX Modem for Internet connection, change the interface metric configuration so that the
wireline interface’s default gateway is used. (See your Operating System’s User Guide.)
33
33
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Routers
Neither the Navini LMX Monitor nor the Navini Diagnostics software will work if it goes through a
router.
Configuration Options
Host computer used
as a router to network
(USB or Ethernet)
Modem providing
access to the Internet
via an Ethernet hub
Modem connected
to a single computer
(Ethernet)
Results of Correct Navini Diagnostics Installation
Experienced PC users can check the results of the Navini Diagnostics installation by looking at
the log file that is created during the installation process. The log file is named
“Navini_Diagnostics_InstallLog.log.” It is located under c:\Program Files\Navini
Diagnostics.
-------
Install Begin: Tue Jul 20 12:15:22 CDT 2004
Install End: Tue Jul 20 12:15:30 CDT 2004
Created with Zero G's InstallAnywhere 4.5.3 Enterprise Build 1394
Summary
-------
Installation: Successful with warnings.
2 SUCCESSES
1 WARNINGS
0 NONFATAL ERRORS
0 FATAL ERRORS
34
34
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Action Notes:
None.
Install Log Detail:
Check Disk Space:
C:\Program Files\NavDiag
Status: SUCCESSFUL
Additional Notes: NOTE - Required Disk Space: 29,363,315; Free Disk Space: 30,806,179,840
Install Directory:
C:\Program Files\NavDiag\
Status: SUCCESSFUL
Get Registry Entry:
InstallDirectory
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, ValueName:
Status: WARNING
Additional Notes: WARNING - Win32Exception
Make Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks, Value Name: , Value Data:
Status: SUCCESSFUL
Make Registry Entry:
Data:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name: , Value
Status: SUCCESSFUL
Make Registry Entry:
Key: HKEY_LOCAL_MACHINE\SOFTWARE\Navini Networks\NavDiag, Value Name:
InstallDirectory, Value Data: C:\Program Files\NavDiag
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\Uninstall\
Status: SUCCESSFUL
Install Uninstaller:
Navini Diagnostics (Install All Uninstaller Components)
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\jre
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.lax
Status: SUCCESSFUL
Install Directory: C:\Program Files\NavDiag\Uninstall\resource\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\resource\iawin32.dll
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Uninstall\resource\remove.exe
Status: SUCCESSFUL
35
35
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Make Registry Entry:
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name:
DisplayName, Value Data: Navini Diagnostics
Status: SUCCESSFUL
Make Registry Entry:
Key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Navini Diagnostics, Value Name:
UninstallString, Value Data: "C:\Program Files\NavDiag\Uninstall\Uninstall NavDiag.exe"
Status: SUCCESSFUL
Install Uninstaller:
Navini Diagnostics (Install All Uninstaller Components)
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Navini Diagnostics.exe
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\Navini Diagnostics.lax
Status: SUCCESSFUL
Create LaunchAnywhere: Navini Diagnostics.exe (Install All LaunchAnywhere Java Executable Components)
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\
Status: SUCCESSFUL
Install Directory:
Install File:
Install File:
Install File:
Install File:
Install File:
Install File:
C:\Program Files\NavDiag\data\images\
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\billboard.gif
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\splash.gif
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\buttonbar.gif
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\about2.gif
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\about1.gif
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\images\about.gif
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\images\uninstall.gif
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\log\
Status: SUCCESSFUL
36
36
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
Install Directory:
Install File:
C:\Program Files\NavDiag\data\lib\
Status: SUCCESSFUL
C:\Program Files\NavDiag\data\lib\ctl.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\navDiag.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\jfreechart-0.9.13.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\jcommon-0.8.8.jar
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\data\lib\log4j.jar
Status: SUCCESSFUL
Install Directory:
C:\Program Files\NavDiag\data\doc\
Status: SUCCESSFUL
Install Directory: C:\Program Files\NavDiag\config\
Status: SUCCESSFUL
Install File:
C:\Program Files\NavDiag\config\NavDiag.lcf
Status: SUCCESSFUL
Install Directory:
Create Shortcut:
Create Shortcut:
Install Directory:
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\
Status: SUCCESSFUL
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Navini Diagnostics.lnk
Status: SUCCESSFUL
C:\Documents and Settings\luis\Start Menu\Programs\NavDiag\Uninstall.lnk
Status: SUCCESSFUL
C:\Documents and Settings\luis\Desktop\
Status: SUCCESSFUL
Additional Notes: NOTE - Directory already existed
Create Shortcut:
C:\Documents and Settings\luis\Desktop\Navini Diagnostics.lnk
Status: SUCCESSFUL
37
37
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
ADDENDUM 2: End User Software License Agreement
between
Navini Networks, Inc.
and
Buyer
ARTICLE 1
IMPORTANT MESSAGE
1.1
2.1
Act of Assent. Installing the Software indicates that you have read, understand and accept this
License Agreement.
ARTICLE 2
LICENSES
Grant of License. The Software and related Documentation, are the intellectual property of Navini
Networks, Inc. and are protected by law. Navini Networks, Inc. grants to Buyer a personal,
nonexclusive, nontransferable worldwide license, for revocable use (as permitted herein) of the
Software based on the terms and conditions of this License Agreement and the Master Supply
Agreement to which it is attached. Buyer is permitted to install and use the Software on its
server, but only in conjunction with the Navini Hardware. Buyer is not permitted to rent, sell or
otherwise transfer the Software to any third parties.
2.2
Ownership Rights. Under this Agreement, Buyer does not acquire any rights of ownership in the
Software and related Documentation and subsequent releases and versions licensed by Navini
Networks, Inc. to Buyer pursuant to this License Agreement, whether in printed or machine-
readable format. Buyer acquires only the right to use the Software and related Documentation
subject to the terms and conditions of this Agreement. Buyer promises to keep the Software in
confidence for the benefit of Navini Networks, Inc. and agrees to destroy or return the Software
and all copies at such time as Buyer chooses to cease using the Software or upon termination or
cancellation of this License Agreement for any reason.
2.3
2.4
Backup Copies. Buyer may copy the Software for safekeeping (archival) or backup purposes,
provided that all such copies of the Software are subject to the provisions of this License
Agreement, and also provided that each copy shall include in readable format any and all
confidential, proprietary, and copyright notices or markings contained in the original.
Assignment. The rights granted in this License Agreement are restricted for use solely by Buyer
and may not be assigned, transferred, or sublicensed, however Buyer may grant access to its
server to End-Users. Each Buyer shall be authorized to make use of the Software in the form in
which it is provided to Buyer solely for Buyer’s own computer server location. Buyer represents
that it will not use the Software for any purpose that is not expressly delineated in this
Agreement. Further Buyer represents that it will comply with all export, re-export, and other
laws in its use of the Software.
38
38
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
2.5
Suitability.
a.
Buyer alone is responsible for determining which software best suits Buyer’s needs, for
installing and operating the Software, and for the results obtained. Accordingly, each
Buyer should determine its needs, and evaluate the Software’s capabilities before making
a final decision about licensing the software.
b.
c.
Navini Networks, Inc. makes no representation that the Software conforms to or satisfies
any federal, state, or local laws. Buyer is encouraged to engage professional assistance
from attorneys and engineers to evaluate the suitability of the Software for Buyer’s use.
Navini Networks, Inc. makes no claims that the Software is suitable for Buyer’s intended
purposes.
2.6
2.7
Remote Digital Access. Navini Networks, Inc. reserves the right, but is not obligated to digitally
access the Software for the purposes of upgrading and maintaining the Software.
U.S. GOVERNMENT RESTRICTED RIGHTS. All Software provided to the U.S. Government
pursuant to solicitations issued on or after December 1, 1995 is provided with the commercial
license rights and restrictions described elsewhere herein. All Software provided to the U.S.
Government pursuant to solicitations issued prior to December 1, 1995 is provided with
“Restricted Rights” as provided for in FAR, 48 CFR 52.227-14 (June 1987) or DFAR, 48 CFR
252.227-7013 (Oct 1988), as applicable
ARTICLE 3
TRADE SECRETS
3.1
3.2
Trade Secret. Navini Networks, Inc. considers the licensed Software covered by this License
Agreement to be a trade secret. Navini Networks, Inc. does not disclose any information to
Navini Networks, Inc. competitors or potential competitors. Buyer shall not disclose any design,
code, or technological know-how gained by access to the Software to Licensor’s competitors.
Buyer shall not use design, code, or documentation gained by access to the Software to develop a
similar technology or a competing software product. To attempt to or to do so, the Parties
acknowledge, understand and agree, constitute a material breach of this License Agreement.
Third Party Intellectual Property. Buyer acknowledges, understands and agrees that the licensed
Software covered by this License Agreement may contain Intellectual Property owned by Third
Parties and duly licensed to Navini Networks, Inc. Copyright, Patent and other laws protect Third
Party Intellectual Property manufactured with, marketed with, or otherwise bundled with the
licensed Software. Buyer promises to keep such Third Party Intellectual Property in confidence
to the benefit of the Third Party, agrees not to reverse engineer or otherwise decompile Third
Party Intellectual Property, and agrees to stop using, destroy and/or return such Third Party
owned Intellectual Property under the same terms and conditions as the licensed Software as set
forth in this License Agreement.
39
39
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
ARTICLE 4
INDEMNIFICATIONS AND WARRANTY
4.1
4.2
Intellectual Property Indemnification; Entire Liability. ARTICLE 15 OF THE SUPPLY
AGREEMENT TO WHICH THIS AGREEMENT IS ATTACHED STATES THE ENTIRE
LIABILITY OF NAVINI NETWORKS, INC. WITH RESPECT TO INFRINGEMENT OF
COPYRIGHTS, TRADE SECRETS, TRADEMARKS, PATENTS, AND OTHER
INTELLECTUAL PROPERTY RIGHTS BY THE LICENSED SOFTWARE,
DOCUMENTATION, OR ANY PARTS THEREOF, AND NAVINI NETWORKS, INC.
SHALL HAVE NO ADDITIONAL LIABILITY WITH RESPECT TO ANY ALLEGED OR
PROVEN INFRINGEMENT.
Warranty. EXCEPT AS GRANTED IN THE BODY OF THE SUPPLY AGREEMENT TO
WHICH THIS LICENSE AGREEMENT IS ATTACHED, THE LICENSED SOFTWARE IS
PROVIDED BY NAVINI NETWORKS, INC. “AS IS” AND WITHOUT WARRANTY OF
ANY KIND OR NATURE, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING
(WITHOUT LIMITATION) THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITATION OF WARRANTIES WAS A
MATERIAL FACTOR IN THE ESTABLISHMENT OF THE LICENSE FEE CHARGED FOR
EACH SPECIFIC ITEM OF SOFTWARE LICENSED.
ARTICLE 5
LIMITATION OF LIABILITY
5.1
Consequential Damages. TO THE MAXIMUM EXTENT PERMITTED BY THE APPLICABLE
LAW, IN NO EVENT SHALL NAVINI NETWORKS, INC. OR ANY THIRD PARTY
INVOLVED IN THE CREATION, PRODUCTION, DELIVERY, OR LICENSING OF THE
SOFTWARE BE LIABLE FOR ANY LOST REVENUES, PROFITS OR DATA OR OTHER
SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES,
HOWEVER CAUSED AND REGARDLESS OF THEORY OF LIABILITY, EVEN IF NAVINI
NETWORKS, INC. HAS, OR SHOULD HAVE HAD ANY KNOWLEDGE, ACTUAL OR
CONSTRUCTIVE, OF THE POSSIBILITY OF SUCH DAMAGES.
5.2
5.3
License-Fee Limitation. Except for the indemnification provisions of Article 15, Navini
Networks, Inc.’s maximum liability for damages is limited to the license fees paid by Buyer under
this Agreement for the particular licensed Software that caused the damages.
Loss of Data. Software error can cause a significant loss of data. Navini Networks, Inc. shall not
be responsible for any loss of data. Navini Networks, Inc.’s responsibility is to correct the
Software error as provided in this License Agreement or the Supply Agreement to which it is
attached. It is Licensee’s responsibility to have adequate backup procedures to protect Buyer
from significant loss of valid data.
40
40
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Navini Networks, Inc.
Ripwave MX Modem User Guide
ARTICLE 6
OBJECT CODE ONLY-NO MODIFICATIONS
6.1
Modifications. In order to maintain the “trade secret” status of the information contained in the
Licensed Software, Navini Networks, Inc. provides the Software in object-code form only. Buyer
shall not modify, enhance, adapt, disassemble, translate, decompile or otherwise decode any
portion of the object code of the Software module. Buyer shall not use the Software without a
license to the Software object code. The object code contains the license number, date of license,
and other license information. This information is placed in the object-code portions to prevent
unauthorized and unlicensed distributions of the Software. Buyer shall not subvert or change any
of this information. Further Buyer shall not make, full or partial, copies of any documentation
whether printed or machine- readable media supplied with the Licensed Software unless
expressly granted prior written permission by Navini Networks, Inc.
6.2
6.3
Responsibility for Damages. Buyer is subject to the provisions of the Supply Agreement with
respect to the Software (including Section 16). Buyer is fully liable and responsible for any
damages, indirect or direct, and costs that Navini Networks, Inc. may incur if Buyer appoints a
subcontractor who accesses the Software without Navini’s prior written consent. Buyer shall
defend, indemnify, and hold Navini Networks, Inc., its directors, officers, employees, agents,
Authorized Partners, and other representatives harmless accordingly for all costs and direct and
indirect damages sustained by Navini Networks, Inc. However, if the subcontractor is pre-
approved by Navini in writing for access to the Software, then this Section shall not apply.
Copyright Notices. Buyer shall not remove any copyright or proprietary rights notice or
identification that indicates Navini Networks, Inc. ownership from any part of the licensed
Software, it being expressly understood and agreed that the existence of such copyright notice
should not be construed as an admission or presumption that publication of the licensed Software
has occurred.
END OF AGREEMENT
Copyright © 2001-2006 Navini Networks, Inc.
All rights reserved. Printed in the USA.
Navini Networks is a registered trademark. Zero-Install, Ripwave, and Unwired by Navini are
trademarks of Navini Networks, Inc. Other product and company names mentioned herein may be
trademarks and/or service marks of their respective owners. Rev. 052302
41
41
060210_pv1.6_Ripwave-MX Modem User Guide_40-00382-00b(4.4.2)
Download from Www.Somanuals.com. All Manuals Search And Download.
|