Download from Www.Somanuals.com. All Manuals Search And Download.
Proprietary Notice and Liability Disclaimer
The information disclosed in this document, including all designs and related
materials, is the valuable property of NEC Computers Inc. (hereinafter “NEC Computers”) and/or its
licensors. NEC Computers and/or its licensors, as appropriate, reserve all patent, copyright and other
proprietary rights to this document, including all design, manufacturing, reproduction, use, and sales
rights thereto, except to the extent said rights are expressly granted to others.
The NEC Computers product(s) discussed in this document are warranted in accordance with the
terms of the Warranty Statement accompanying each product. However, actual performance of each
such product is dependent upon factors such as system configuration, customer data, and operator
control. Since implementation by customers of each product may vary, the suitability of specific
product configurations and applications must be determined by the customer and is not warranted by
NEC Computers.
To allow for design and specification improvements, the information in this document is subject to
change at any time, without notice. Reproduction of this document or portions thereof without prior
written approval of NEC Computers is prohibited.
As an ENERGY STAR partner, NEC Computers Inc. has determined that this product meets the
ENERGY STAR guidelines for energy efficiency. ENERGY STAR is a U.S. registered mark.
NEC is a registered trademark; Versa is a U.S. registered trademark; DayLite, VersaGlide and UltraLite
are trademarks; and UltraCare is a U.S. registered service mark of NEC Corporation and/or one or more of
its subsidiaries. All are used under license.
Microsoft, Windows and Windows 2000 are registered trademarks of Microsoft Corporation.
Transmeta, Crusoe, and LongRun are trademarks of Transmeta Corporation.
All other trademarks and registered trademarks are the property of their respective trademark
owners.
First Printing - March 2001
Copyright 2001
NEC Computers Inc.
15 Business Park Way
Sacramento, CA 95828
All Rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Using This Guide
Text Setup........................................................................................................................... vii
Related Documents ............................................................................................................ viii
1 Introducing Your NEC Versa
Before You Begin .............................................................................................................. 1-2
About Your NEC Versa Notebook..................................................................................... 1-3
Around the Front of the System......................................................................................... 1-3
LCD Panel................................................................................................................... 1-4
Base Unit..................................................................................................................... 1-4
Keyboard Panel........................................................................................................... 1-6
Front Features ............................................................................................................. 1-8
Around the Back of the System.......................................................................................... 1-9
Around the Left Side of the System................................................................................... 1-9
Around the Right Side of the System............................................................................... 1-10
Power Button ............................................................................................................ 1-11
Around the Bottom of the System.................................................................................... 1-12
2 Getting Started
NEC VersaGlide Touchpad................................................................................................ 2-2
Making VersaGlide Adjustments................................................................................ 2-3
VersaGlide Tips.......................................................................................................... 2-3
Power Sources for Your NEC Versa Notebook ................................................................. 2-3
AC Adapter........................................................................................................................ 2-3
Connecting the AC Adapter........................................................................................ 2-4
Powering On Your System ......................................................................................... 2-6
Primary Battery Pack ......................................................................................................... 2-6
Secondary Battery Pack ..................................................................................................... 2-6
Determining Battery Status......................................................................................... 2-7
Low Battery Status...................................................................................................... 2-7
Returning the Battery to its Normal State................................................................... 2-8
Extending Battery Life................................................................................................ 2-8
Battery Handling......................................................................................................... 2-8
Replacing the Battery.................................................................................................. 2-8
Charging the Battery................................................................................................. 2-11
Battery Precautions................................................................................................... 2-11
Precautions for Recharging the Battery .................................................................... 2-12
System Batteries............................................................................................................... 2-12
CMOS Battery .......................................................................................................... 2-12
Optional Battery........................................................................................................ 2-12
System Care ..................................................................................................................... 2-12
Precautions for System Use ...................................................................................... 2-13
Storage Requirements ............................................................................................... 2-13
Routine Cleaning ...................................................................................................... 2-14
Contents iii
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Using the BIOS Setup Utility
Introducing BIOS Setup .....................................................................................................3-2
Entering BIOS Setup..........................................................................................................3-2
BIOS Setup Main Menu..............................................................................................3-3
How to Use Setup........................................................................................................3-3
Main Menu..................................................................................................................3-5
Advanced Menu ..........................................................................................................3-8
Security Menu...........................................................................................................3-10
Boot Menu.................................................................................................................3-11
Exit Menu..................................................................................................................3-11
Managing System Power..................................................................................................3-12
Windows 2000 Power Options Properties.................................................................3-12
Windows 2000 Power Schemes ................................................................................3-13
Windows 2000 Alarms..............................................................................................3-14
Windows 2000 Power Meter.....................................................................................3-14
Windows 2000 Advanced .........................................................................................3-15
Windows 2000 Hibernate..........................................................................................3-15
Windows 2000 Power Management States...............................................................3-16
Recognizing the Windows 2000 Power Management States ....................................3-16
Updating the BIOS...........................................................................................................3-17
Obtaining the BIOS Update ......................................................................................3-17
Preparing the BIOS Update Diskette.........................................................................3-17
Performing the BIOS Update ....................................................................................3-18
Configuring the Switch Settings.......................................................................................3-19
Accessing the DIP Switch.........................................................................................3-19
Identifying the Switch Settings .................................................................................3-20
4 Using the Operating System and Utilities
Microsoft Windows Introduction .......................................................................................4-2
Windows 2000 ............................................................................................................4-2
Desktop Icons.......................................................................................................4-2
Taskbar Icons.......................................................................................................4-3
Transmeta LongRun Utility................................................................................................4-4
Setting LongRun Properties ........................................................................................4-4
Product Recovery CD.........................................................................................................4-5
Guidelines for Using the Product Recovery CD .........................................................4-5
Product Recovery CD Options....................................................................................4-5
Full Disk Drive Restore...............................................................................................4-6
Partition Only Restore.................................................................................................4-7
5 Using the System Drives and Bays
External Floppy Diskette Drive..........................................................................................5-2
Connecting the External Floppy Diskette Drive..........................................................5-3
Disconnecting the External Floppy Diskette Drive.....................................................5-3
External Variable-Speed CD-ROM Drive..........................................................................5-3
Using the CD-ROM Drive with your NEC Versa Notebook ......................................5-6
Disconnecting the CD-ROM Drive.............................................................................5-8
iv Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Care ...................................................................................................................... 5-8
Hard Disk Drive................................................................................................................. 5-9
Memory Modules............................................................................................................... 5-9
Installing a Memory Module..................................................................................... 5-10
6 Communicating with Your NEC Versa
PC Cards ............................................................................................................................ 6-2
Type II Cards .............................................................................................................. 6-2
Type II Extended Cards .............................................................................................. 6-2
Communication Cards ................................................................................................ 6-2
Storage Cards.............................................................................................................. 6-3
Other Cards................................................................................................................. 6-3
PC Card Slots.............................................................................................................. 6-3
Inserting a PC Card..................................................................................................... 6-4
Removing a PC Card .................................................................................................. 6-4
Mini PCI LAN ................................................................................................................... 6-5
Connecting the Mini PCI LAN ................................................................................... 6-5
Internal Modem.................................................................................................................. 6-6
Connecting the Internal Modem.................................................................................. 6-6
Internet Connections .......................................................................................................... 6-7
IR Port................................................................................................................................ 6-7
Enabling/Disabling the IR Port in Windows 2000...................................................... 6-8
Using the IR Port ........................................................................................................ 6-8
7 Traveling Tips
Preparing for Travel........................................................................................................... 7-2
Packing for Travel.............................................................................................................. 7-2
Using Power Connections.................................................................................................. 7-3
Getting Through Customs.................................................................................................. 7-3
Connecting to the Internet.................................................................................................. 7-4
Connecting Using a Modem ....................................................................................... 7-4
Connecting Using a LAN............................................................................................ 7-4
8 Using Peripheral Devices
External Monitor................................................................................................................ 8-2
External Audio Options...................................................................................................... 8-3
USB Devices...................................................................................................................... 8-4
9 Using Multimedia
Audio ................................................................................................................................. 9-2
Recording.................................................................................................................... 9-2
Microphone................................................................................................................. 9-3
Mixing......................................................................................................................... 9-3
Playing Back............................................................................................................... 9-3
Using Headphones ...................................................................................................... 9-4
Using the Built-In Speaker.......................................................................................... 9-4
Using External Stereo Speakers.................................................................................. 9-4
MIDI Files................................................................................................................... 9-4
Contents
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Video..................................................................................................................................9-4
Using Digital Video Files............................................................................................9-4
Using Animation Files ................................................................................................9-5
Multimedia Applications....................................................................................................9-5
10 Solving System Problems
Problem Checklist ............................................................................................................10-2
Start-Up Problems............................................................................................................10-3
Post Error Messages..................................................................................................10-4
Beep Codes ...............................................................................................................10-6
If You Need Assistance....................................................................................................10-7
11 Getting Service and Support
Service and Support Contact Information ........................................................................11-2
Web Site...........................................................................................................................11-3
FTP Site............................................................................................................................11-3
Support Services...............................................................................................................11-4
Email/Fax to Support Services.........................................................................................11-4
A Setting Up a Healthy Work Environment
Making Your Computer Work for You.............................................................................A-2
Arrange Your Equipment ..................................................................................................A-3
Adjust Your Chair .............................................................................................................A-3
Adjust Your Input Devices................................................................................................A-3
Adjust Your Screen or Monitor.........................................................................................A-4
Vary Your Workday..........................................................................................................A-5
Pre-Existing Conditions and Psychosocial Factors ...........................................................A-5
B Specifications
System Components.......................................................................................................... B-2
Memory Map..................................................................................................................... B-7
Interrupt Controllers.......................................................................................................... B-8
C Frequently Asked Questions
External Mouse ................................................................................................................. C-2
Display .............................................................................................................................. C-2
PC Cards............................................................................................................................ C-3
Diskette Drive ................................................................................................................... C-3
Booting.............................................................................................................................. C-5
Power Management........................................................................................................... C-5
Miscellaneous.................................................................................................................... C-7
Glossary
Index
Regulatory Statements
vi Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Using This Guide
The NEC Versa® DayLite™/UltraLite™ User's Guide gives you the information you
need to maximize the use of your NEC Versa notebook computer. Read this guide to
familiarize yourself with the NEC Versa and its features. For specific information see
!
!
!
!
!
Chapter 1, “Introducing Your NEC Versa,” to acquaint yourself with system
hardware.
Chapter 2, “Getting Started,” for instructions on how to connect, power on, and care
for your system.
Chapter 3, “Using the BIOS Setup Utility,” for details about modifying system
parameters and managing system power.
Chapter 4, “Using the Operating System and Utilities,” for an understanding of your
Microsoft® Windows® operating system.
Chapter 5, “Using the System Drives and Bays,” to master procedures for
connecting the external floppy disk drive, connecting the external CD-ROM drive,
and installing a memory module.
!
!
Chapter 6, “Communicating with Your NEC Versa,” for essential information about
using PC Cards and other communication features of the system.
Chapter 7, “Traveling Tips,” for a variety of checklists to help you to prepare your
notebook computer for getting through customs and accessing the internet when
you are on the road.
!
!
!
!
!
!
Chapter 8, “Using Peripheral Devices,” to master procedures for connecting
external devices like an external monitor, headphones, a printer, or speakers.
Chapter 9, “Using Multimedia,” for steps on integrating video and sound clips into
impressive presentations.
Chapter 10, “Solving System Problems,” for simple solutions to common problems
that may arise while operating your notebook.
Chapter 11, “Getting Service and Support,” for information about getting help when
you need it from NEC Computers Inc.
Appendix A, “Setting Up a Healthy Work Environment,” for guidelines that help
promote a healthy work setting.
Appendix B, “Specifications,” to review NEC Versa system specifications.
Using This Guide vii
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Appendix C, “Frequently Asked Questions,” (FAQs) for a look at questions that
users commonly ask and the answers to those questions.
Text Setup
To make this guide as easy to use as possible, text is set up as follows.
Warnings, cautions, and notes have the following format:
!
Warnings alert you to situations that could result in serious
personal injury or loss of life.
Cautions indicate situations that can damage the system
hardware or software.
Note Notes give particularly important information about whatever is being described.
!
!
Names of keys are printed as they appear on the keyboard, for example, Ctrl, Alt, or
Enter.
Text that you must type or keys that you must press are presented in bold type. For
example, type dir and press Enter.
Related Documents
See the NEC Versa DayLite/UltraLite Quick Setup sheet to help get your system up and
running.
viii Using This Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introducing Your NEC Versa
! Before You Begin
! About Your NEC Versa Notebook
! Around the Front of the System
! Around the Back of the System
! Around the Left Side of the System
! Around the Right Side of the System
! Around the Bottom of the System
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
This manual is the user’s guide for both the NEC Versa UltraLite and Versa DayLite
notebook computers. All information applies to both units unless otherwise specified.
The coloring of your NEC Versa may vary from the units shown in this guide. The
colors of the systems used in this User’s Guide are for illustrative purposes only.
Prolonged or improper use of a computer workstation may
pose a risk of serious injury. To reduce your risk of injury, set up and use your computer
in the manner described in Appendix A, “Setting Up a Healthy Work Environment.”
After completing the steps in the Quick Setup sheet that comes with your computer,
your NEC Versa DayLite/UltraLite notebook computer is ready to go! To get started,
do the following:
!
Read Appendix A, “Setting Up a Healthy Work Environment,” for guidelines that
help you use your computer productively and safely. Information includes how to
set up and use your computer to reduce your risk of developing nerve, muscle, or
tendon disorders.
!
Read through this guide to familiarize yourself with the NEC Versa.
1-2 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
About Your NEC Versa Notebook
The NEC Versa notebook computer offers you a portable system filled with exciting
resources for home, business, or travel. Standard features include a powerful
Transmeta Crusoe TM5600 600MHz microprocessor that works together with the
latest Peripheral Component Interconnect (PCI) architecture.
In addition, your system provides a high-performance hard disk drive, external
CD-ROM and diskette drives, and PC Card support. As a multimedia system, your
NEC Versa also provides the tools needed to create and present impressive images
using video clips and sound.
NEC Versa notebook computer
To get comfortable with your notebook, read the following sections and take a tour
around your system!
Around the Front of the System
The NEC Versa is compact with features on every side. First, look at the front of the
NEC Versa. The following sections describe front features, beginning with the liquid
crystal display (LCD) panel.
Introducing Your NEC Versa 1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Panel
Your NEC Versa comes with a 10.4-inch color Thin Film Transistor (TFT) display that
you can adjust for a comfortable viewing position. To adjust the viewing angle, gently
tilt the LCD panel into position. The primary battery is located behind the display. The
Versa UltraLite has an Extended Graphics Array (XGA) backlit panel. The Versa
DayLite has a TFT Super Video Graphics Array (SVGA) reflective panel.
To adjust the LCD panel brightness press the Fn-F8 and Fn-F9 functions keys. For
more details about using the system’s function keys, see the topic later in this chapter,
“Keyboard Panel.”
Base Unit
The base unit of your NEC Versa offers the following features, described after the
figure.
After extended use, the surface of the base unit, below the
keyboard, may become hot to the touch.
LCD panel and base unit
A – Operating Status LEDs
B – LCD Panel
D – NEC VersaGlide touchpad
E – Speaker
C – Microphone
F – Keyboard
1-4 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
Keyboard — 86 keys with a country-specific QWERTY-key layout.
LCD Panel — Provides a high-resolution display for sharp, effective visuals on
your NEC Versa.
!
!
Microphone — A strategically positioned built-in microphone allows you to record
monophonic sound directly into your notebook computer. See Chapter 9, “Using
Multimedia,” for details about recording.
NEC VersaGlide touchpad — Works like a standard computer mouse. Simply move
your fingertip over the VersaGlide to control the position of the mouse pointer. Use
the selection buttons below the VersaGlide to select menu items. VersaGlide
settings and features are described in detail in Chapter 2.
!
!
Speaker — Provides mono sound for your system when speakers are not plugged
into the speaker jack.
Operating Status LEDs — Keep you informed of your NEC Versa notebook's
current operating status. See the following figure and list for each icon's meaning.
Operating status LEDs
A – Hard Disk Drive
C – Scroll Lock
B – Caps Lock
D – Num Lock
— Hard Disk Drive — lights when the NEC Versa writes data to or retrieves data
from the internal hard disk drive.
— Caps Lock — lights when Caps Lock is on.
— Scroll Lock — lights when Scroll Lock is on.
— Num Lock — lights when Num Lock in on.
Introducing Your NEC Versa 1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard Panel
The NEC Versa notebook’s keyboard offers the following features, which are described
after the figure.
Keyboard
A – Function Keys
B – Numeric Keys
C – Windows keys
D – Cursor Control Keys
E – Control Keys
!
Function keys — Twelve function keys, F1 through F12, are available on the NEC
Versa keyboard. These keys work together with the Fn key to activate special
functions. Several keys are preprogrammed with dual functions and some are
printed in blue on the key.
Function keys are application-driven. See the specific application's user guide for
information about how each function key works within the application you are
using.
The following function key combinations are preprogrammed for the NEC Versa
computer.
Fn-F3 — toggles between three video modes; LCD, CRT, or both (LCD and CRT).
Fn-F6 — sets the beeper volume to low, medium, high, or mute.
Fn-F8 — increases the LCD panel brightness.
Fn-F9 — decreases the LCD panel brightness.
Fn-F10 — increases the system speaker volume.
1-6 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
Fn-F11 — decreases the system speaker volume.
Fn-F12 — toggles the scroll lock feature
Fn-Ins —print screen
Fn-Del — system request
Fn-Pause — break
Fn-↑ — page up
Fn-↓ — page down
Fn-← — end
Fn-→ — home
!
Numeric keypad — Pressing NumLk on the keyboard activates the numeric keypad
numbers and functions printed in blue on the keys.
The keypad lets you type numbers and mathematical operands (+, -) as you would
on a calculator. The keypad is ideal for entering long lists of numbers.
When you press NumLk again, the keys revert to their normal functions as
typewriter keys.
!
!
Cursor Control keys — Cursor control keys let you position the cursor on the screen
where you want. On the screen, the cursor is a blinking underline, block, or vertical
line depending on the application. The cursor indicates where the next text typed is
inserted.
Windows keys — In Windows use the following two keys to facilitate your work.
Quick access to shortcut menus
Displays the Start menu
!
Control keys — Ctrl, Alt, Fn, and Shift are controls used in conjunction with other
keys to change their functions. To use control keys, press and hold the control key
while pressing another key. For example, “press Ctrl c” means to hold down the
Ctrl key and type the letter c. How the key combination works depends on the
application you are running.
Introducing Your NEC Versa 1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Typewriter keys — The typewriter keys (also called alphanumeric keys) are used to
enter text and characters. Keys with blue printing on them behave differently when
combined with control keys or the Fn key.
Front Features
The front features of your NEC Versa notebook are described after the figure.
Features on the front of the system
A – IR Port
B – Battery Charging LED
C – Power Status LED
!
Power Status LED — This LED lights to indicate the following:
— Lights green when the system power is on.
— Blinks green when the system is in Standby mode.
— Lights yellow (blinks when in Standby mode) to indicate that battery power is at
8% capacity or less.
— Lights amber (blinks when in Standby mode) to indicate that battery power is at
3% capacity or less.
!
Battery Charging LED — lights to indicate battery charging activity.
— Lights amber when the primary battery is charging. Blinks amber to indicate an
error. The primary battery is installed in the battery bay.
— Lights green when the secondary battery is charging. Blinks green to indicate an
error. The secondary battery is connected to the back of the system.
1-8 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
!
IR Port — Use this infrared (IR) port to transfer files between your NEC Versa and
an IR-equipped desktop or notebook computer or to print to an IR-capable printer.
Note
Your NEC Versa ships with the IR port disabled. For detailed instructions on
how to enable the IR port, see Chapter 6, “Communicating with Your NEC Versa.”
Around the Back of the System
The battery bay which contains the system's secondary lithium-ion (Li-Ion) battery is
located at the back of your NEC Versa computer. For more detailed information on the
battery bay, refer to the “Getting Started” chapter of this user’s guide.
Around the Left Side of the System
The left side of your NEC Versa notebook offers the following features, which are
described after the figure.
Left-side features
A – AC Power Port
B – Vent
D – RJ-11 Jack
E – USB Port
C – External Monitor (Video) Port
F – LAN Cable Jack
!
!
!
AC Power Port — Attaches the NEC Versa to a power source, such as the AC
adapter.
Vent — Allows your system to cool properly and maintain a safe operating
temperature.
External Monitor (Video) Port — Use this port to attach an external monitor to your
NEC Versa. You can run the LCD display and the external monitor simultaneously
or run either alone.
!
RJ-11 Jack — Connects the internal modem to an analog telephone line.
Introducing Your NEC Versa 1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
USB Port — The Universal Serial Bus (USB) port allows you to connect up to 127
USB-equipped peripheral devices (printers, monitors, scanners, etc.) to your NEC
Versa.
LAN Cable Jack (optional) — If your system has this feature, it will have shipped
with a LAN adapter cable to connect the jack to a local area network (LAN).
Always keep the vents unobstructed to allow proper system
cooling.
Around the Right Side of the System
The right side of the NEC Versa notebook offers the features, which are described after
the figure.
Right-side features
A – Headphone Jack/External Speakers
B – External Microphone Jack
C – Power Button
D – PC Card Slot
E – USB Port
F – Kensington® Lock Slot
!
Power Button — Slide the Power button forward to power on, power off, and to
resume from Standby mode.
For more information about the Power button, see the following topic, “Power
Button.”
!
!
Headphone Jack/External Speakers — Lets you connect external headphones or
speakers to your NEC Versa. Plugging in headphones disables the built-in system
speakers.
External Microphone (MIC) — Allows you to connect an external microphone for
monophonic recording or amplification through the unit. Plugging in an external
microphone disables the built-in microphone.
1-10 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
!
PC Card Slot — Accommodates one type II PC Card. These cards are often storage
or communication devices such as Static Random Access Memory (SRAM), Read
Only Memory (ROM), Flash Memory, LAN, and Small Computer System Interface
(SCSI).
!
!
USB Port — The Universal Serial Bus (USB) port allows you to connect up to 127
USB-equipped peripheral devices (printers, monitors, scanners, etc.) to your NEC
Versa.
Kensington Lock Slot — Provides a connection for an optional Kensington Lock.
Power Button
The Power button is a “smart” switch, meaning that it recognizes when the system is in
Standby mode. If in Standby mode, you cannot power off until you slide the Power
button to the right to resume operation. (The BIOS parameter “System Switch” must be
set to “Sleep.”)
Put the unit in Standby mode when you need to be away from your system for a short
period of time and want to return to where you left off. Standby mode shuts down all
devices in the system while retaining data and system status. Go to Start, Shut Down,
Standby to put your system into Standby mode.
Use the Power button in the following ways:
— Slide the Power button forward to power on.
— Slide the Power button forward to resume from Standby mode and proceed with
normal operation.
— Hold the Power button in place for four or more seconds to power off the system
(power override). Only use this option if you cannot power off your system
using Start, Shut Down.
Introducing Your NEC Versa 1-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Around the Bottom of the System
The bottom of the NEC Versa notebook offers the following features, which are
described after the figure.
Bottom features
A – Memory Module Bay
B – System Feet
C – Hard Drive Bay
D – Secondary Li-Ion Battery
E – Battery Release Latch
F – Vents
!
!
!
!
!
Memory Module Bay — Stores an optional memory module.
System Feet — Heightens the system to allow proper ventilation.
Hard Drive Bay — Stores the system’s hard drive.
Secondary Li-Ion Battery — Removable secondary power supply.
Battery Bay Release Latch — Releases and removes the system’s secondary
battery.
!
Vents — Allow your system to cool properly and maintain a safe operating
temperature.
Always keep the vents unobstructed to allow proper system
cooling.
1-12 Introducing Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Getting Started
! NEC VersaGlide Touchpad
! Power Sources for Your NEC Versa notebook
! AC Adapter
! Primary Battery Pack
! Secondary Battery Pack
! System Batteries
! System Care
Download from Www.Somanuals.com. All Manuals Search And Download.
NEC VersaGlide Touchpad
The NEC VersaGlide is an easy way to control the cursor with your finger. Lightly
glide your finger across the NEC VersaGlide and the cursor follows. The NEC
VersaGlide provides standard mouse functionality, plus more. VersaGlide features
include the:
!
!
!
Single tap to the touchpad, equivalent to a single click of the primary mouse
button.
Double tap to the touchpad, equivalent to a double click of the primary mouse
button.
Click and hold, then drag your finger across the VersaGlide touchpad, equivalent
to a click and drag of the primary mouse button.
!
Slide your finger along the right side of the touchpad to scroll your document or
screen.
VersaGlide
A – Touchpad
C – Right Button
B – Left (Primary) Button
Try all of the features and decide which you prefer. If you find the double tap or any of
the other features difficult to use, go to the next section for general directions about
adjusting the touchpad properties.
2-2 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Making VersaGlide Adjustments
The NEC VersaGlide offers a number of options that let you customize how it
functions. The options let you control the cursor speed, select button orientation, enable
or disable tapping, define auto jumps, enable easy-scrolling, and configure gestures to
initiate selected functions by tapping in a designated area of the touchpad.
To access these options, locate the Control Panel and double click the mouse icon. Use
the context-sensitive help to learn more about each option. Select the option, then press
F1 to access the context sensitive help.
VersaGlide Tips
Follow these basic tips while working:
!
!
Use a light touch on the VersaGlide surface.
Set up the NEC Versa notebook with your keyboard and VersaGlide at a
comfortable height. Keep your forearms parallel to the floor. Your wrists should be
relaxed and straight.
!
!
While using the keyboard and VersaGlide, keep your shoulders and arms as relaxed
as possible.
Take regular breaks from the computer to rest your eyes. Perform stretching
exercises to relax your fingers, hands, wrists, forearms, and shoulders.
See Appendix A, “Setting Up a Healthy Work Environment,” for more information.
Power Sources for Your NEC Versa Notebook
The NEC Versa notebook can be powered using three different sources, making it a
truly portable system.
Operate your NEC Versa notebook just about anywhere using one of the following
power sources:
!
!
the AC adapter connected to an electrical wall outlet (using AC power)
the primary and secondary batteries
Read the following sections for specific information about using the NEC power
sources.
AC Adapter
Use the AC adapter and power cable that came with your NEC Versa notebook to run
your computer on alternating current (AC) power, or to recharge the batteries. Use the
AC adapter whenever a wall outlet is nearby.
Getting Started 2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Keep the adapter connected whenever possible. It charges the battery when it is
connected, whether the NEC Versa notebook is powered on or off.
AC adapter
A – AC Adapter
C – Power Cable
B – Adapter Cable
Do not attempt to disassemble the AC adapter. The AC
adapter has no user-replaceable or -serviceable parts inside. Dangerous voltage in the
AC adapter can cause serious personal injury or death. The AC adapter is intended for
use with a computer and must meet EN609050 standards.
Connecting the AC Adapter
Note
The AC power cable type that your system uses depends on the country
where you are using it. Contact the local dealer to purchase the correct power cable.
Connect the AC adapter as follows:
1. Connect the AC adapter cable to the power port on the left side of your NEC Versa
notebook.
2-4 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Plug one end of the AC power cable into the AC adapter and the other end into a
properly grounded 120- or 240-volt, 50- or 60-Hz wall outlet.
Connecting the AC adapter
A – Adapter Cable
C – AC Adapter
B – AC Power Port
D – Power Cable
Do not cover or place objects on the AC adapter. Keeping the
adapter clear of objects lets the adapter cool properly during use.
Only use the AC adapter that comes with your NEC Versa notebook. Although other
adapters look similar, using them can damage your system.
Getting Started 2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Powering On Your System
Power on the system as follows:
1. Locate the latch on the front of the unit, slide it to the right, and raise the LCD
panel.
2. Locate the Power button and slide it forward to turn on system power. For
additional information about Power control buttons and power LEDs, refer to
Chapter 1, “Introducing the NEC Versa.”
Note
When powering on your NEC Versa notebook running the Windows 2000
operating system, you may encounter a warning message suggesting that a problem
exists with the hibernation file on your system. The warning message is inaccurate. To
disable this message, simply enable hibernate support. See the section, “Windows 2000
Hibernate,” in Chapter 3, for details about enabling hibernate support.
Primary Battery Pack
The NEC Versa notebook comes with rechargeable Lithium Polymer (Li-Poly) battery
behind the LCD panel. This battery is not user-replaceable.
Secondary Battery Pack
The NEC Versa notebook comes with a secondary rechargeable Lithium Ion (Li-Ion)
battery pack that is easy to install and remove.
Secondary Lithium-Ion battery
A – Battery Connectors
B – Alignment Grooves
2-6 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
To prevent accidental battery ignition or explosion, adhere to
the following:
!
!
!
!
Keep the battery away from extreme heat.
Keep metal objects away from the battery connectors to prevent a short circuit.
Make sure the battery is properly installed in the battery bay.
Read the precautions printed on the battery.
Determining Battery Status
Your NEC Versa notebook system provides tools to help you keep track of the power
levels of the primary and secondary batteries. If your system is configured to display
the power icon on the taskbar (default setting), an electrical plug appears when the
system is connected to an AC power source or a battery icon appears when the system
is not connected to an AC power source.
Use the system’s power meter to determine battery status. Access the system’s power
meter in the following ways:
!
!
!
!
Move the cursor over the power icon on the taskbar to display the remaining battery
power for the system’s main battery.
Right click the power icon on the taskbar to open the power meter or to adjust
power properties.
Double click the power icon on the taskbar to display the remaining power for both
the main and secondary batteries.
Go to Start, Settings, Control Panel, and double click the Power Management icon
and select the Power Meter tab.
Low Battery Status
When combined battery power is
!
!
low (8% or less), the power LED lights yellow when in use, and flashes yellow in
standby.
very low (3% or less) the power LED lights amber when in use, and flashes yellow
in standby.
When your system is in a low battery status, do one of the following:
!
Power off the system, remove the secondary battery pack and replace it with a fully
charged battery.
Getting Started 2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Leave the battery in the system and connect your NEC Versa notebook to the AC
adapter and a wall outlet. If you connect the system to AC power and keep the
system within standard operating temperatures, the batteries recharge in
approximately 4.5 hours when off, and 8 hours when on.
Returning the Battery to its Normal State
To return the battery to its normal state, try the following:
!
!
Remove and then reinstall the battery
Reinstall the battery in your NEC Versa notebook and fully recharge the battery (to
100%).
Extending Battery Life
While on the road, it is important to be aware of the simple things you can do to extend
the life of the system's main battery. One way is to keep the brightness setting low. Use
the Fn-F8 and Fn-F9 function keys to control the brightness.
Battery Handling
Keep the following in mind when removing or replacing a battery.
!
Use only the battery designed for your NEC Versa system. Mixing other
manufacturers’ batteries, or using a combination of very old and new batteries can
deteriorate battery and equipment performance.
!
Turn off power to the system after use. Keeping system power on can degrade
battery performance and shorten battery life.
!
!
Clean the battery connectors with a dry cloth when they get dirty.
Keep the battery out of the reach of children.
Replacing the Battery
The following symptoms indicate that battery life is nearing an end. Replace batteries
that display these symptoms.
!
!
!
!
Shorter work times.
Discoloration, warping.
Hot to the touch.
Strange odor.
2-8 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Replace the secondary battery installed in your NEC Versa notebook system as follows.
Note
Use the batteries in the NEC Versa notebook computer for which they are
designed. Installing another manufacturer’s battery, or using a combination of very old
and new batteries can deteriorate battery and equipment performance.
1. Save your files, exit Windows and turn off system power.
2. Close the LCD panel and turn over the system.
3. Slide the battery release latch toward the right side of the system and hold firmly.
Locating the battery bay release latch
A – Battery Release Latch
Getting Started 2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Continue to hold the battery release latch as you slide the battery out of the system.
Removing the battery
A – Battery Bay Connectors
C – Secondary Li-Ion Battery
B – Battery Bay Release Latch
5. Insert the new battery as follows:
!
!
!
!
Locate the alignment grooves on the edge of the battery.
Locate the alignment grooves inside the battery bay.
Align the grooves on the battery with the grooves in the bay.
Slide the battery into the bay until securely locked into place.
Inserting the battery
A – Battery Bay Connectors
C – Alignment Grooves
B – Battery Bay Release Latch
D – Secondary Li-Ion Battery
6. Turn over the system.
2-10 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
Charge the primary and secondary batteries by simply connecting your NEC Versa
system to an AC power source. It takes 8 hours to fully charge the battery while the
system is on, and 4.5 hours while the system is off. To monitor the charging activity,
observe the battery charging LED on the front of the system. The battery charging LED
lights as follows:
!
!
!
!
Lights amber when the primary battery is charging.
Blinks amber if the primary battery encounters an error while charging.
Lights green when the secondary battery is charging.
Blinks green if the secondary battery encounters an error while charging.
Battery Precautions
To prevent accidental battery ignition, rupture, or explosion, adhere to the following
precautions.
There is a danger of explosion if the battery is
incorrectly replaced. Replace only with the same or equivalent type recommended
by the manufacturer. Discard used batteries according to the manufacturer’s
instructions.
To avoid personal injury and property damage, read these battery precautions on
handling, charging, and disposing of Li-Ion batteries.
!
Keep the battery away from heat sources including direct sunlight, open fires,
microwave ovens, and high-voltage containers. Temperatures over 140º F
(60º C) may cause damage.
!
!
!
!
!
Do not drop or impact the battery.
Do not disassemble the battery.
Do not solder the battery.
Do not puncture the battery.
Do not use a battery that appears damaged or deformed, has any rust on its
casing, is discolored, overheats, or emits a foul odor.
!
!
Keep the battery dry and away from water.
Keep metal objects away from battery connectors. Metal objects in contact
with the connectors can cause a short circuit and damage.
If the battery leaks:
!
If the battery leaks onto skin or clothing, wash the area immediately with
clean water. Battery fluid can cause a skin rash and damage fabric.
!
If battery fluid gets into eyes, DO NOT rub; rinse with clear water immediately
and consult a doctor.
Getting Started 2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Take extra precautions to keep a leaking battery away from fire. There is a
danger of ignition or explosion.
Precautions for Recharging the Battery
Adhere to the following precautions when recharging the primary or secondary battery.
!
!
Charge the battery for the specified charge time only (8 hours when on, 4.5 hours
when off).
During charging, keep the environmental temperature between 32° F and 104° F
(0° C to 40° C).
System Batteries
Your NEC Versa notebook is equipped with a primary Lithium Polymer battery and a
secondary Lithium Ion battery to help prevent data loss. Only the secondary battery is
removable.
In addition, the CMOS battery also provides system power. See Appendix B for a list
of battery specifications.
CMOS Battery
This lithium battery provides battery backup and prevents data loss in the system's
complementary metal oxide semiconductor (CMOS) RAM. This memory area contains
information on the system's configuration, for example date, time, drives, and memory.
The CMOS battery charges when your NEC Versa notebook is connected to AC power.
The CMOS battery may discharge completely if the NEC Versa notebook remains
unused for approximately two months.
Optional Battery
Your NEC Versa system allows you to remove and replace the secondary Li-Ion
battery with an optional Extra Life Lithium-Ion battery.
2-12 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
System Care
The NEC Versa notebook is designed to be a durable, dependable system built for
extensive use and travel. Follow these guidelines to maintain the condition and
performance of your computer.
Immediately turn off and unplug the NEC Versa notebook
under the following conditions:
!
!
!
The power cord is damaged or frayed.
Liquid spills on or into the NEC Versa notebook.
The system is dropped or the casing is damaged.
Precautions for System Use
Follow these precautions when using your NEC Versa computer and AC adapter.
!
!
!
Avoid dropping or bumping the computer or the AC adapter.
Do not stack heavy objects on the computer, the AC adapter, or the batteries.
Avoid moving the NEC Versa notebook during system operation, especially while
the hard disk is being accessed.
!
When using the AC adapter, make sure the power source falls within the system's
compatible range of 100-240 volts and 50 or 60-Hz, AC. Never use the AC adapter
if the voltage falls outside of this range. (Watch for this when traveling to other
countries.)
!
!
!
Turn computer power off before attaching or removing non-plug and play devices.
Do not push any foreign objects into the connectors, and slots.
Do not set the computer on top of a magnetized area. Doing so can destroy the data
on your hard disk drive. (Some airline tray tables are magnetic.)
!
!
!
!
Avoid using the computer or AC adapter for extended periods in direct sunlight.
Do not use the system in humid or dusty environments.
Turn computer power off before cleaning it.
Avoid exposing the NEC Versa notebook or AC adapter to extreme changes in
temperature or humidity. If it is unavoidable, allow your NEC Versa notebook to
adjust to room temperature before use.
!
When cleaning the system, use a soft, clean, dry cloth. Avoid wiping the display
surface with abrasive material, including rough fabric. Do not use a cleaning
solution; this may damage the notebook's plastic.
!
!
If the AC adapter becomes extremely hot, unplug the adapter and let it cool.
Keep the AC adapter away from the IR ports.
Getting Started 2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage Requirements
Store the computer and AC adapter in an environment that meets the following
conditions:
If the temperature of the NEC Versa notebook suddenly rises
or falls (for example, when you move the system from a cold place to a warm place),
vapor condenses inside the system. Turning on the system under this condition can
damage the internal system components.
Before turning on the system, wait until the system's internal temperature equalizes with
the new environment and any internal moisture evaporates.
!
Maintain storage temperatures between -4° F and 104° F (-20° C and 40° C).
Keep the storage area free from vibration and magnetic fields.
!
!
!
Keep the system and its components away from organic solvents or corrosive gases.
Avoid leaving the system and its components in direct sunlight or near heat sources.
Routine Cleaning
Clean or dust your system as follows:
Never use harsh solutions, household cleaners, or spray
cleaners that contain caustic materials on the NEC Versa computer.
These cleaners are usually high in alkalinity which is measured in pH. Using these
cleaners can cause the plastic surface to crack or discolor.
!
!
LCD screen — Carefully wipe the LCD screen with a soft cloth or a screen wipe
designed for that purpose. Special screen wipes are available through your local
computer dealer.
System case — NEC recommends that you carefully wipe the case with a slightly
damp, almost dry cloth.
2-14 Getting Started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Using the BIOS Setup Utility
! Introducing BIOS Setup
! Entering BIOS Setup
! Managing System Power
! Updating the BIOS
! Configuring the Switch Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing BIOS Setup
Your NEC Versa DayLite/UltraLite computer comes with a hardware program called
BIOS Setup that allows you to view and set system parameters. BIOS Setup also allows
you to set password features that protect your system from unauthorized use.
Use BIOS Setup to:
!
!
!
set the current time and date
customize your operating system to reflect your computer hardware
secure your system with a password
Entering BIOS Setup
Access the BIOS utility at power-on. Just press F2 when the following prompt appears.
Press <F2> to Enter Setup.
When you press F2 to enter BIOS Setup, the system interrupts the Power-On Self-Test
(POST) and displays the current CMOS RAM settings.
If the system detects an error during POST, it prompts you with a double beep and a
message: “Press <F1> to resume.” If you press F1, the system enters BIOS Setup
automatically. If you want to fix the error, carefully read the error message that appears
above the prompt (taking notes if you want), and press F2. You will see this message if
your CMOS battery becomes fully discharged.
3-2 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
BIOS Setup Main Menu
After you press F2, the system displays the BIOS Setup Main Menu screen, similar to
the following.
Main Setup Menu
How to Use Setup
The Setup utility has a Main Menu window and five top-level menus with submenus.
The menu bar at the top of the Main Menu window lists the following top-level menus.
!
Main
Use the Main menu for basic system configuration. For example, select
Main to set the system time and date, set diskette and hard disk parameters, or
check memory parameters.
!
!
Advanced
Use the Advanced menu to set IR serial port, I/O device
configuration, LCD panel view, and more.
Security Use this menu to set User and Supervisor passwords, password on boot,
fixed disk boot sector.
!
!
Boot — Use this menu to set boot sequence.
Exit
Exits the Setup utility with various save or discard options.
Using the BIOS Setup Utility 3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the keys listed in the legend bar on the bottom of the Setup menu to make the
selections or exit the current menu. The following table describes the legend keys.
Setup Key Functions
Key
Function
F1
Provides help for the parameter field
being displayed.
Esc
Exits the menu.
Up or down arrow keys
Moves cursor up and down for item
selection.
Left or right arrow keys
Selects next menu.
Changes values.
F5/F6
Enter
Executes a command or selects
submenu.
F9
Loads the default configuration values
for the current menu.
F10
Saves the current values and exits
Setup.
To select one of the five menus from the menu bar, use the left and right arrow keys.
Use the up or down arrow keys to select an item under the menu.
Menu items preceded by a > contain a submenu of selectable fields for setting system
parameters. Display a submenu by using the up or down arrow keys to move the cursor
to the desired submenu, then press Enter.
An Item Specific Help window on the right side of each menu displays the help text for
the currently selected Setup option. It updates as the cursor moves to each new field.
Pressing F1 on any menu brings up the General Help window that describes the legend
keys and their functions.
Press Esc to exit the current window.
The following subsections describe the five top-level menus and their submenus.
3-4 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
Choose the Main menu by selecting Main in the legend bar on the Main menu screen.
Other Main menu options are available by selecting submenus.
Use the arrow keys to select one of the Main menu options and press Enter to select a
submenu. Items with grayed-out text are not available. Explanations of each Main
menu item are in the following table.
Setting items on this menu to incorrect values can cause your
system to malfunction.
Main Menu Items
Menu Item
Settings (default is bold)
Set system time in this field. Press Tab or
Enter to move between hour, minute, and
second fields.
System Time
Example: 09:30:00
Set system date in this field. Press Tab or
Enter to move between month, date, and
year fields.
System Date
Language
Example: 07/09/2001
English, Japanese
Selects the display language for the BIOS.
Bring up the Language submenus by
pressing Enter.
Disabled, 1.44
Diskette A
Selects the diskette drive type. Bring up the
Diskette A submenu by pressing Enter.
Internal HDD
Displays the HDD capacity.
Example: 10056 MB
Bring up the Internal HDD submenu by
pressing Enter. The submenus include Type
and LBA Format.
See the table, “Internal HDD Menu Items” for
descriptions of each submenu and its fields.
Using the BIOS Setup Utility 3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu Items
Menu Item
Settings (default is bold)
Both, LCD, CRT
Boot Display Device
Allows you to choose either display devices,
or both.
System Memory
Displays amount of conventional memory
detected during boot.
This field is read-only and cannot be changed
from BIOS Setup.
Example: 640 KB
Extended Memory
Displays amount of extended memory
detected during boot.
This field is read-only and cannot be changed
from BIOS Setup.
Example: 63488 KB
CPU Type
Displays the processor type.
This field is read-only and cannot be changed
from BIOS Setup.
CPU Speed
Displays the processor speed.
This field is read-only and cannot be changed
from BIOS Setup.
Example: 600 MHz
BIOS Revision
Displays the BIOS revision number.
This field is read-only and cannot be changed
from the BIOS Setup.
Example: 1.0F-3707-6211/149A-0100
Enabled, Disabled
QuickBoot Mode
3-6 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal HDD Submenu Items
Menu Item
Settings (default is bold)
Auto, None, User
Type
When set to Auto, the values for Cylinders,
Heads, Sectors, and Maximum Capacity as
read only.
When set to Auto, the BIOS detects what the
drive is capable of, not the translation
mechanism that was used to format the drive.
If a drive is run in a mode other than the
mode in which it was partitioned and
formatted, unpredictable results may occur,
including data loss.
When set to None, informs the system to
ignore this drive.
When set to User, allows the manual entry of
all fields described next.
Cylinders
When Type is Auto, value in the Cylinders
field is auto-detected and field is read only.
Heads
When Type is Auto, value in Heads field is
auto-detected and field is read only.
Sectors
When Type is Auto, value in Sectors field is
auto-detected and field is read only.
Maximum Capacity
This field is read-only and cannot be changed
from BIOS Setup.
Example: 10056 MB
Multi-Sector Transfers
Disabled, 2, 4, 8, 16 sectors
Determines the number of sectors per block
for multi-sector transfers.
When Type is Auto, value in Multi-Sector
Transfers field is auto-detected and field is
read only.
Using the BIOS Setup Utility 3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal HDD Submenu Items
Menu Item
Settings (default is bold)
Enabled, Disabled
LBA Mode Control
When Enabled is selected, it causes logical
block addressing to be used in place of
cylinders, heads, and sectors.
When Type is set to Auto, the value in the
LBA Mode field is auto-detected and the field
is read only.
Disabled, Enabled
32-Bit I/O
When Enabled, allows 32 bit data transfers.
Transfer Mode
Standard, Fast PIO1, Fast PIO2, Fast PIO3,
Fast PIO4, Fast PIO3/DMA1, Fast
PIO4/DMA2
Selects the method for moving data to and
from the drive.
When Type is set to Auto, the value in the
field is auto-detected and the field is read
only.
Ultra DMA Mode
Disabled, Mode 0, Mode 1, Mode 2, Mode 3,
Mode 4
Selects the Ultra DMA Mode for moving data
to and from the drive. Autotype the drive to
select the optimum transfer mode.
When Type is set to Auto, the value in the
field is auto-detected and the field is read
only.
Advanced Menu
Choose the Advanced menu by selecting Advanced in the legend bar on the Main menu
screen. Other Advanced menu options are available by selecting submenus.
Use the arrow keys to select one of the Advanced menu options and press Enter to
select a submenu. Items with grayed-out text are not available. Explanations of each
Advanced menu item are in the following table.
3-8 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting items on this menu to incorrect values can cause your
system to malfunction.
Advanced Menu
Menu Item
Settings (default is bold)
LockOn, LockOff
BootUp Num-Lock
Selects the state for Num Lock at power on.
Enabled, Disabled
PS/2 Mouse
Enabled forces the PS/2 mouse port to be
enabled regardless of whether a mouse is
present. Disabled prevents any installed
PS/2 mouse from functioning, but frees up
IRQ 12.
Enabled, Disabled
LCD Panel View Expansion
Disabled reduces the panel view in some
video modes. Enabled expands the panel
view. The enabled setting sometimes affects
graphic quality.
Enabled, Disabled
BootUp Message
Summary Screen
Disabled suppresses the logo screen during
boot.
Disabled, Enabled.
When set to Enabled, information about the
system’s configuration is displayed onscreen
during boot.
Disabled, Enabled, Black.
Silent Boot
When set to Enabled, the logo screen
appears during boot. Disabled causes the
POST messages to appear during boot.
Black causes the screen to remain black
during boot.
Press Enter to bring up the I/O Device
Configuration submenu to configure the IR
serial port.
I/O Device Configuration
Press Enter to view submenu.
On Board Device Configuration
USB Device
Enable, Disable
Using the BIOS Setup Utility 3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Menu
Choose the Security menu by selecting Security from the Main menu screen. Other
Security menu options are available by selecting submenus.
Use the arrow keys to select one of the Security menu options and press Enter to select
a submenu. Items with grayed-out text are not available. Explanations of each Security
menu item are in the following table.
Security Menu Items
Menu Item
Settings (default is bold)
Press Enter to access.
Set Supervisor Password
Use this field to set or change the supervisor
password. Press Enter to bring up a dialog
box where the password can be entered and
confirmed.
Press Enter to access.
Set User Password
Use this field to set or change the user
password. Press Enter to bring up a dialog
box where the password can be entered and
confirmed.
Disabled, Enabled
Password on Boot
When Enabled, requires password entry
before boot. System remains in secure
mode until the password is entered.
Normal, Write Protect
Fixed Disk Boot Sector
Write Protect protects the boot sector on the
hard disk from viruses.
3-10 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Boot Menu
Choose the Boot menu by selecting Boot in the legend bar on the Main menu screen.
Other Boot menu options are available by selecting submenus.
Use the arrow keys to select one of the Boot menu options and press Enter to select a
submenu. Items with grayed-out text are not available. Explanations of each Boot menu
item are in the following table.
Boot Menu Settings
Menu Item
Settings (default is bold)
USB Drive
Hard Drive
The Boot Menu displays the bootable
devices in the current boot order.
Use the up or down arrows to select a
device.
Press Enter to expand or collapse device
information.
Press Ctrl Enter to expand or collapse all
device information.
Use the plus (+) or minus (-) key to move a
selected device up or down in the boot
order.
Exit Menu
Choose the Exit menu by selecting Exit in the legend bar on the Main menu screen.
Other Exit menu options are available by selecting submenus.
Use the arrow keys to select one of the Exit menu options and press Enter to select a
submenu. Explanations of each Exit menu item are in the following table.
Exit Menu Items
Menu Item
Settings (default is bold)
Exit Saving Changes
Implements the changes just made, and
exits BIOS.
Exit Discarding Changes
Load Setup Defaults
Exits, leaving BIOS unchanged.
Loads default values for all BIOS setup
fields.
Using the BIOS Setup Utility 3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Exit Menu Items
Menu Item
Settings (default is bold)
Discard Changes
Loads previous values from BIOS for all
setup fields.
Save Changes
Battery Refresh
Saves all setup value changes to BIOS.
Reactivates the battery (applies to the
Lithium-Ion battery).
Managing System Power
In the Windows 2000 operating system environment, your NEC Versa manages its
power resources using the Advanced Configuration and Power Interface (ACPI) while
the system is powered on using AC or battery (DC) power. ACPI enables the operating
system to manage the power given to each attached device and to turn off a device
when not in use.
Take advantage of the opportunity to manage power on your system to:
!
!
!
Minimize battery drain.
Preserve the life of your NEC Versa.
Save time. When you return from that urgent call or meeting, you don’t have to
reboot, just slide the Power button to resume system operation.
Windows 2000 Power Options Properties
In Windows 2000, most ACPI power management settings are controlled through
Windows Power Options Properties, not through the BIOS Setup utility. To access
Windows 2000 Power Options Properties, go to Start, Settings, Control Panel, and
double click Power Options.
The Power Options Properties features are broken down as follows:
!
!
!
!
!
Power Schemes
Alarms
Power Meter
Advanced
Hibernate
3-12 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2000 Power Schemes
Use the Power Schemes options to define the appropriate Power scheme for your
system, and to set timeouts for standby, LCD panel, and hard disk. Define parameters
for your system when running under AC (plugged in) or DC (running on batteries)
power.
Power Schemes
Parameter
Default Setting
Alternate Setting(s)
Power Schemes
Portable/Laptop
Home/Office Desk,
Presentation, Always On,
Minimal Power
Management, Max.
Battery
Turn off monitor
(Plugged in)
After 15 Minutes
After 5 Minutes
After 30 Minutes
After 5 Minutes
After 20 Minutes
After 5 Minutes
After 1 Hour
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
Turn off monitor
(Running on batteries)
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
Turn off hard disks
(Plugged in)
3, 5, 10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5
hours; Never
Turn off hard disks
(Running on batteries)
3, 5, 10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5
hours; Never
System standby
(Plugged in)
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
System standby
(Running on batteries)
1, 2, 3, 5, 10, 15, 20, 25,
30, 45 minutes; 1, 2, 3, 4,
5 hours; Never
System hibernates
(Plugged in and running
on batteries)
10, 15, 20, 25, 30, 45
minutes; 1, 2, 3, 4, 5, 6
hours; Never
!
!
!
Power Schemes — Defines the most appropriate power scheme for your computer.
Turn off monitor — Selects the time delay before your LCD panel turns off.
Turn off hard disks — Selects the time delay before your hard disk(s) power down.
Using the BIOS Setup Utility 3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
System standby — Selects the system standby timeout period for your system when
running under AC or DC power.
System hibernates — Selects the system hibernate timeout period for your system
when running on AC or DC power.
Windows 2000 Alarms
Use the Alarms screen to define the point at which the battery alarm activates. Define
the alarm to either sound, display a warning message, or invoke Standby, Hibernate or
Shutdown.
Alarms
Parameter
Default Setting
Alternate Setting(s)
Low battery alarm
10%
0-100%
Alarm Action Notification Display message
Sound alarm
Standby, Power Off
Alarm Action Power
Level
None
Critical battery alarm
3%
0-100%
Alarm Action Notification Display message
Sound alarm
Power Off, Hibernate
Alarm Action Power
Level
Standby
Run a program
None
When the alarm occurs,
run this program.
!
!
!
Low battery alarm — Allows you to define a low battery alarm percentage,
notification, and system action.
Critical battery alarm — Allows you to define a critical battery alarm percentage,
notification, and system action.
Run a program — Allows you to run a specific program when an alarm occurs.
Windows 2000 Power Meter
The Power Meter screen displays the remaining battery power and charging status for
the primary and secondary batteries. Choose to display either a percentage progress bar
or a battery icon with percentage indicator for your battery status information.
3-14 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2000 Advanced
The Advanced window allows you to select behaviors for the taskbar icon, standby
password, LCD panel, when closed, and the Power button.
Advanced
Parameter
Default Setting
Alternate Setting(s)
Always show icon on
taskbar
unchecked
checked
Prompt for password
when computer goes off
standby
checked
unchecked
When I close the lid on my None1
computer
Standby, Power Off,
Hibernate
When I press the Power
button on my computer
Power Off
Standby, Hibernate
1 When None is selected, LCD panel turns off when closed.
!
Always show icon on the taskbar — Determines whether or not the Power Meter
icon displays on the taskbar.
!
Prompt for password when computer goes off standby — Determines whether or
not the system prompts for your Windows password when resuming from Standby.
!
!
When I close the lid of my computer — Defines the system action when the LCD
panel is closed.
When I press the Power button on my computer — Defines the system action when
the Power button is used.
Windows 2000 Hibernate
Use the Hibernate window to enable hibernate support, see the amount of free disk
space, and the amount of disk space required to hibernate. When your system
hibernates it performs a save-to-disk or save-to-file (STF). Your current working
environment is saved to the hard disk. Use the Power button to resume from
hibernation and your system returns to its previous state.
Using the BIOS Setup Utility 3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows 2000 Power Management States
ACPI uses different levels or states of power management. The power management
states occur automatically, based on the system’s default settings, or manually, when
invoked. Settings are configurable to occur while on battery power or AC power.
The Windows 2000 ACPI power management states include:
!
!
LCD timeout — manages power at the lowest level by shutting down the LCD.
Standby — also known as Save-to-RAM (STR), Standby manages power by saving
your current working environment to memory and shutting down most system
devices. Conserves more power than an LCD timeout.
!
Hibernate — also known as save-to-disk, or save-to-file (STF) manages power by
saving the current working environment to an area on your hard disk, then powering
off your system. Conserves the most battery power.
Recognizing the Windows 2000 Power Management States
It is important to recognize your system’s behavior when in each of these power
management states. The following table describes the system behavior for each power
management state.
Windows 2000 Power Management Behavior
LCD Timeout
Standby (STR)
Hibernate (STF)
Default
Setting
2 Minutes, DC power
5 Minutes, DC power
20 minutes, AC power
30 minutes after Standby.1
15 Minutes, AC power
Close LCD panel.
Manually
Invoke
Go to Start, Shutdown,
Standby.
Close LCD panel.2
Press Power button.2
System
behavior
LCD panel is blank.
LCD panel is blank.
LCD panel is blank.
Status LED turns off.
Status LED lights
green.
Status LED blinks green.
Progress bar indicates that
current working
environment is saved to
hard disk.
Resume
Press any key.
Press Power button.
Press Power button.
Progress bar appears
during process.
1 When 3% battery power remains.
2 Only when set in Advanced Windows Power Management Properties.
3-16 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating the BIOS
The BIOS is code transmitted onto your system’s Flash ROM. As indicated in this
chapter, you use the BIOS Setup utility to configure your system’s software and
hardware features. Use the BIOS Update Diskette for your specific model to update
your NEC Versa system BIOS.
Note
You only need to update the BIOS if NEC Computers makes significant
improvements or fixes to the current system BIOS. Your authorized NEC dealer or NEC
support representative can help you determine this.
To update the system BIOS you must:
!
!
!
Obtain the BIOS Update
Prepare the BIOS Update Diskette
Perform the BIOS Update
Obtaining the BIOS Update
If you are informed that the default BIOS needs an update contact the NEC Computers
Support Services at (800) 632-4525, Fax (801) 579-1552, or access the web site,
www.neccomp.com to obtain a copy of the BIOS update.
Note
If you purchased and are using this computer outside the U.S. or Canada,
please contact a local NEC or dealer in your country.
Preparing the BIOS Update Diskette
Before using the BIOS update diskette you must make the diskette BIOS flash ready.
Refer to the readme.txt file on the diskette before using the diskette.
Follow these instructions to prepare the BIOS Update Diskette.
1. Scan your hard drive for any computer viruses.
2. Enable the diskette for write access.
3. Insert the diskette into the diskette drive.
Using the BIOS Setup Utility 3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Type a:\install at the DOS prompt and follow the on-screen instructions.
Install.bat copies the DOS system files from your hard drive onto the BIOS Update
Diskette to make it BIOS flash ready.
The system prompts you when the process is complete.
5. Scan the BIOS Update Diskette for computer viruses.
The diskette is ready for use.
Performing the BIOS Update
Follow these steps to perform the BIOS update. Before you begin, be sure to:
!
!
!
!
Connect the computer to AC power and power off the computer.
Configure the Boot Device Setup to boot from a floppy diskette.
Remove any bootable CDs from the CD-ROM drive, if connected.
Document all customized BIOS settings
1. Power on the computer with the diskette in the drive. The computer boots and
automatically loads the utility. A message similar to the following appears:
The NEC BIOS Update Utility should not be used to modify the BIOS in a Versa
system which is docked. If your Versa is docked, please exit the BIOS Update
Utility, power down, and undock your Versa before running the utility. Plug in your
AC cable before restarting the flash utility.
2. Press Enter to continue.
The utility checks the currently installed BIOS version and the diskette’s BIOS
version. The Main menu appears.
3. Use the arrow keys to highlight the “Display BIOS Version” option on the Main
Menu. Use this option to check the currently installed BIOS version and the
version of the new replacement BIOS.
Press any key to return to the Main menu.
4. Highlight the “Install New BIOS” option and press Enter.
5. Press Y and then press Enter. After a brief pause, a message appears telling you to
remove the diskette from the drive.
6. Remove the diskette and press any key to continue. The utility updates the BIOS.
7. Power off your computer. The next time you power on your computer, you will
have the latest NEC Versa computer BIOS revision level.
3-18 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Power on your computer. A CMOS Checksum message appears and prompts you
to press F1 to enter Setup.
9. Press F1 to enter Setup and restore the default parameter settings.
10. Be sure to modify any custom settings that you may have configured.
11. Disable the BIOS flash switch. Change switch 5 back to “OFF” after completing
the BIOS update. For details about enabling and disabling the BIOS flash switch,
see the section earlier in this chapter, “Enabling the BIOS Flash Switch.”
Configuring the Switch Settings
Some system settings are set through DIP switches. The six-position dip switch is
located on the bottom of the system. The switch is accessed by removing the memory
module bay cover.
See the following sections for information on accessing the DIP switches and
identifying DIP switch settings.
Accessing the DIP Switch
Follow these steps to access the DIP switch in the memory bay.
1. Power off the system and disconnect any peripheral devices.
2. Turn the system over and locate the screw on the memory bay.
Memory module bay cover and screw
A – Screw
B –Memory Module Bay Cover
Using the BIOS Setup Utility 3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remove the screw and lift off the memory module bay cover. See “Identifying the
Switch Settings” for information about each setting.
4. Reassemble the NEC Versa components as follows.
!
!
!
Replace the memory module bay cover.
Replace the screw.
Turn the system over.
Identifying the Switch Settings
The following list identifies each switch setting and its function.
!
Switch 1 — Password override — The default setting is “OFF.” If you forget your
password and cannot access the data on your NEC Versa, change the setting to
“ON” and your current password is erased.
!
Switch 2 — Keyboard select; Default is “ON” for U.S. 86 key keyboard and “OFF”
for European keyboard.
!
!
Switch 3 — Not assigned; must be “OFF.”
Switch 4 — Keyboard select 2; Default is “ON” for US and “OFF” for European
keyboards.
!
!
Switch 5 — Reserved for factory use; Default is “ON.”
Switch 6 — Logo select; Default is “OFF.”
Default switch settings
3-20 Using the BIOS Setup Utility
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
The system memory expansion slot is also located here. Therefore, if you
need to install/replace SO-DIMM modules, you might want to do so when the system is
already disassembled.
1. Replace the memory module bay cover and screw.
2. Turn over the system.
3. Follow the instructions earlier in this chapter, “Performing the BIOS Update.”
Using the BIOS Setup Utility 3-21
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Using the Operating System and Utilities
! Microsoft Windows Introduction
! Transmeta LongRun Utility
! Product Recovery CD
Download from Www.Somanuals.com. All Manuals Search And Download.
Microsoft Windows Introduction
Your NEC Versa comes pre-installed with the Microsoft Windows 2000 operating
system, which provides a means of running applications, navigating through your file
structure, and using your notebook computer. It offers its own look and tools and
employs its own easy-to-use graphical interface.
Windows 2000
Windows 2000 gives you the newest features offered by Microsoft, including a
Desktop with room to maneuver, taskbar icons for quick access to installed
applications, a system performance and monitoring manager, enhanced entertainment
features, and a fully integrated Internet experience.
Desktop Icons
With Windows 2000, the following icons are installed on your desktop:
!
!
!
My Computer — Provides access to drives, the control panel, network features, and
scheduled tasks.
Recycle Bin — Gives you a trash container in which to put and discard unwanted
files or allows you to restore those same files back to their original location.
My Network Places — When on a network, provides access to network printers and
other computers on your network. Use my network places to browse through the
computers in your workgroup and the computers in the entire network.
!
!
My Documents — Provides you with a convenient place to store documents,
graphics, and other files for quick access.
Connect to the Internet — Runs the Internet Connection wizard that helps you to set
up your computer to access the Internet.
Note
Before connecting to the Internet, you must either connect an optional modem
and a working phone line to your system or install a LAN card for network access.
Your NEC Versa comes with all the software you need to get started on the most
popular services available today. For a fee, online services give you access to the
Internet, email, the world wide web, travel information, news reports, and more.
4-2 Using the Operating System and Utilities
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Before choosing and registering for an online service, you must connect an
optional modem to your system and to a working phone line. The phone line must be
analog. If you are unsure what type of line you have, call your local phone company.
If you are using this product outside of the United States or Canada, some online
services may require a long-distance or international call.
!
Microsoft Internet Explorer — Provides your default internet program. Also access
Internet Explorer under Start, Programs, Internet Explorer.
Taskbar Icons
With Windows 2000, three icons appear on the taskbar. Use the cursor to hover over
the icon and display its function, right click the icon to display its menu options, or
double click the icon to launch it.
The following icons normally appear on the left side of the Windows 2000 taskbar.
!
Internet Explorer — Allows you to browse the internet or view local HTML files.
Also access Internet Explorer under Start, Programs, Internet Explorer.
!
Microsoft Outlook Express — Provides your default email program with secure and
personalized features for email and newsgroup communication. Also access
Outlook Express under Start, Programs, Outlook Express.
!
Show Desktop — Minimizes all active screens to display your desktop.
Using the Operating System and Utilities 4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmeta LongRun Utility
The Crusoe processor that powers your NEC Versa notebook is equipped with the
LongRun power management utility. This utility automatically adjusts the clock speed
and voltage of the processor based on the needs of the application. If the system is in an
idle state, or doing processing that doesn’t require faster clock speeds, it automatically
lowers to 300MHz. If the system is completing more demanding tasks, it adjusts up to
full 600MHz. The ability to lower the processor speed results in longer battery life for
your NEC Versa system.
The LongRun utility is a tool that allows you to override these automatic adjustments
by the processor. You can
!
Force the processor to stay at the lower 300MHz speed to preserve the battery
when you need the system to run for a long time without an AC source.
Forcing the battery to run at lower speeds slows some applications but extends
the battery life by hours.
!
Force the processor to stay at the higher 600MHz speed when system speed is
necessary, or when the system is running on an AC power source.
LongRun utility status bar
A – Current Speed
D – Current Speed Indicator
B – Range of Speeds
C – Minimum Speed Slider
E – Maximum Speed Slider
Setting LongRun Properties
To adjust the default GUI properties of the LongRun utility, right click on the top of the
dialog title bar and select Properties from the pull-down menu.
4-4 Using the Operating System and Utilities
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Recovery CD
The Product Recovery CD contains the NEC Product Recovery Utility that allows you
to restore your system to its initial installation state.
If you determine that you need to restore your system to its initial installation state
follow the instructions provided here.
Note
Only use the Product Recovery utility to restore your system to its initial
installation state as a last resort. Check the problem checklist in Chapter 10 for
information about solving problems before using the CD. The Product Recovery utility
provides options that either remove or replace existing files, a process that may result in
data loss.
Before using the Product Recovery CD, enter the BIOS Setup utility and restore the
BIOS default settings. Save the default settings before exiting the BIOS Setup utility.
Guidelines for Using the Product Recovery CD
Follow these guidelines when using the Product Recovery CD.
!
!
Use AC power.
Remove all optional hardware such as PC Cards, USB devices, printers, and
monitors.
Product Recovery CD Options
The Product Recovery CD and Utility provides you with a number of choices. Move
the cursor over each selection on the NEC Product Recovery Utility screen to display a
description of the selection in the window at the right side of the screen.
!
Restore System — Select this option if you wish to restore your hard disk drive to
its initial installation state. Restore System allows you to restore your system in one
of the following ways.
— Full Disk Drive — Completely rebuilds your hard disk drive, destroying all
existing data in the process.
Note
Use the Full Disk Drive restore option if your hard disk consists of one
partition (drive).
Using the Operating System and Utilities 4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
— Partition Only — Lets you preserve your existing hard disk drive partition
structure and format only the primary partition without affecting the extended
partition(s). Partition Only formats drive C: (of a multiple partitioned drive) and
restores drive C: to its initial installation state. To use the Partition Only option,
drive C: must be equal to or greater than 1 GB. Additional partitions, e.g.,
drives D:, E:, etc., remain intact.
Note
Use the Partition Only restore option if your hard disk is partitioned into two or
more partitions (drives).
!
Exit — Exits the NEC Product Recovery utility.
Full Disk Drive Restore
If your preinstalled software becomes unusable and you cannot boot from the hard disk,
use the Product Recovery utility to restore your system to its initial shipping
configuration. The Full Disk Drive restore option erases the hard disk completely
before reinstalling the files.
The Full Disk Drive restore option deletes all files on the hard
drive and replaces them with the original factory installed files.
Only use the Full Disk Drive restore option if the preinstalled software is unusable.
Use the Product Recovery utility to perform a Full Disk Drive restore as follows:
1. Check the Product Recovery CD title and make sure that it is the correct CD for
your NEC Versa computer and operating system.
2. Power off your system before connecting the external CD-ROM drive to your NEC
Versa.
3. Put the CD into the CD-ROM drive tray, close the drive door, and power on your
system.
4. Read the License Agreement screen that appears. Use the VersaGlide touchpad to
position the cursor on the Accept button. Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you decline the
agreement, the recovery utility exits.
5. In the NEC Product Recovery utility screen, use the VersaGlide touchpad to
choose Full Disk Drive to restore your hard disk drive to its original factory
installed state.
4-6 Using the Operating System and Utilities
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose your restore option carefully to prevent losing data and
applications installed on your system.
6. Read the Warning screen.
A warning displays indicating that your hard disk is about to be erased.
7. Select Continue to proceed to perform a Full Disk Drive restore.
If you select Back, the recovery utility returns to the prior screen which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
Do not turn off or disturb the system during the recovery
process.
8. When the recovery process is complete, you are prompted to remove the CD from
the CD-ROM drive and reboot your system.
9. Press Enter, click Reboot, or press Alt-R to reboot your system.
A series of hardware detection screens display, the system reboots and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
Partition Only Restore
If your preinstalled software on drive C: of your multiple partitioned drive becomes
unusable and you cannot boot from the hard disk, use the Product Recovery Utility to
restore your primary partition to its initial shipping configuration.
Use the Partition Only restore option only if your hard disk
drive consists of multiple partitions and if drive C: contains the operating system and
related drivers. Move all other data and applications to other partitions (drives) or the
Partition Only restore process will erase them completely.
The Partition Only restore option deletes all files on drive C: and replaces them with the
original factory installed files. Only use the Partition Only restore option if the
preinstalled software on drive C: is unusable.
Using the Operating System and Utilities 4-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the Product Recovery Utility to perform a Partition Only restore as follows:
1. Check the Product Recovery CD title and make sure that it is the correct CD for
your NEC Versa computer and operating system.
2. Power off your system before connecting the external CD-ROM drive to your NEC
Versa.
3. Put the CD into the CD-ROM drive tray, close the drive door, and reboot your
computer.
4. Read the License Agreement screen that appears. Use the VersaGlide touchpad to
position the cursor on the Accept button. Left click to accept the agreement.
You have the option of accepting or declining the agreement. If you decline the
agreement, the recovery utility exits.
5. In the NEC Product Recovery Utility screen, use the VersaGlide touchpad to
choose Partition Only to restore drive C: of a multiple partitioned drive to its
original factory installed state.
Choose your restore option carefully to prevent losing data and
applications installed on your system.
If the hard disk is configured with multiple or extended partitions you may have to
reinstall some software to restore configuration settings and shared files.
6. Read the Warning screen.
A warning displays indicating that drive C: (the primary drive/partition) is about to
be erased and formatted. It may be necessary to reinstall software to the other
drives (partitions) to reestablish Start Menu links and other configuration
requirements stored on drive C:.
7. Select Continue to proceed, to perform a Partition Only restore.
If you select Back, the recovery utility returns to the prior screen which has an exit
option.
If you select Continue, a screen with progress bars displays and lets you know the
progress of the recovery.
Do not turn off or disturb the system during the recovery
process.
4-8 Using the Operating System and Utilities
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When the recovery process is complete, you are prompted to remove the CD from
the CD-ROM drive and reboot your system.
9. Press Enter, click Reboot, or press Alt-R to reboot your system.
A series of hardware detection screens display, the system reboots, and the
Windows Setup screen appears. Follow the on-screen instructions to set up
Windows.
You are required to reenter your Microsoft license number.
Using the Operating System and Utilities 4-9
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Using the System Drives and Bays
! External Floppy Diskette Drive
! External Variable-Speed CD-ROM Drive
! Hard Disk Drive
! Memory Modules
Download from Www.Somanuals.com. All Manuals Search And Download.
External Floppy Diskette Drive
The NEC Versa notebook ships with a standard 3.5-inch, 1.44-MB external floppy
diskette drive and cable. Use the floppy diskette drive to install applications, create a
BIOS update diskette, or simply copy files to and from your NEC Versa notebook
computer.
Connect the drive to one of the USB ports. When connected, the floppy diskette drive is
assigned the letter a:.
The external floppy diskette drive offers the following features, which are described
after the figure.
External floppy diskette drive and cable
A – Status LED
B – Floppy Diskette Drive Bay
C – Eject Button
D – Floppy Diskette Drive
E – Floppy Diskette Drive Cable
F – USB Port Connector
!
!
!
Status LED — Lights to indicate drive activity.
Floppy Diskette Drive — Use the cable provided to attach this drive to your system.
Eject Button — Press this button to eject/remove a diskette from the floppy diskette
drive.
!
!
Floppy Diskette Drive Bay — Insert your floppy diskettes in this bay.
Floppy Diskette Drive Cable — Use this cable to connect the floppy diskette drive
to your NEC Versa notebook system.
!
USB Port Connector — Attach the large end of the connector to the USB port on
the left side of your system.
5-2 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the External Floppy Diskette Drive
Follow these steps to connect the external floppy diskette drive to your NEC Versa
system.
1. Locate the external floppy diskette drive and cable that ships with your system.
2. Attach the cable connector to the USB port on the NEC Versa system.
Connecting the external floppy diskette drive
A – Floppy Diskette Drive Cable
B – USB Port
3. Insert a floppy diskette into the drive bay and you are ready to go!
Disconnecting the External Floppy Diskette Drive
Follow these steps to disconnect the external floppy diskette drive:
1. Double click the Unplug/Eject icon on the toolbar and a box will pop up.
2. Highlight the floppy drive and press Stop.
3. Pull the USB connector out of the port.
External Variable-Speed CD-ROM Drive
Your NEC Versa notebook ships with an external 24X maximum/10x minimum
variable-speed CD-ROM drive and cable. Use the CD-ROM drive to load and start
programs from a compact disc (CD). You can also use the CD-ROM drive to play your
audio CDs. When your audio CD finishes playing the last track, the CD-ROM drive
cover automatically opens. The CD-ROM drive is fully compatible with multisession
Kodak™ Photo CD™ discs and standard audio CDs.
Using the System Drives and Bays 5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Use the external CD-ROM drive in the following ways:
!
Connect the drive to one of the USB ports to load and start programs. When
connected, the CD-ROM drive is assigned an available drive letter.
Note
The first time that you connect the CD-ROM drive, do so before powering on
the system. Once you install and use the External Drive Connect Utility, you can
connect the CD-ROM drive while the system is powered on. For details, see the section,
“External Drive Connect Utility,” later in this chapter.
The CD-ROM drive operates at different speeds depending on whether the CD you are
using contains data or music. This allows you to get your data faster and to see
smoother animation and video. In addition, data is read at a variable transfer rate
depending on its location. The maximum rated speed is generally achieved only when
reading the outermost track on a completely filled CD.
The external CD-ROM drive and cable offer the following features, which are
described after each figure.
External CD-ROM drive, left and front
A – Headphone Jack
B – Volume Control
C – Release Latch
D – Status LED
E – Play/Stop Button
F – Forward Button
!
Headphone Jack — Attach external headphones to listen to your audio CDs. (For
stand-alone use, only. Do not use this headphone jack when the CD-ROM drive is
connected to your NEC Versa notebook.)
!
!
Volume Control — Increase or decrease the volume of your audio CDs.
Release Latch — Use this latch to open the cover of the CD-ROM drive and insert
or remove a compact disc.
5-4 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Status LED — Lights green when powered on or connected to the NEC Versa
notebook. Lights amber during data read operations. Do not eject the CD or turn off
the NEC Versa notebook when the indicator lights amber.
!
!
Play/Stop Button — Use this button to start or stop your compact discs.
Forward Button — Use this button to advance the playback of your compact disc,
one track at a time.
External CD-ROM drive, right and rear
A – CD-ROM Drive Connector
!
CD-ROM Drive Connector — Attach the CD-ROM drive cable to this connector to
use the drive with your NEC Versa system.
CD-ROM drive cable
A – USB Connector
B – CD-ROM Cable Connectors
!
!
USB Cable Connectors — Use the connector to attach the cable to either USB port
on the NEC Versa system.
CD-ROM Drive Cable — Attach to the CD-ROM drive.
Using the System Drives and Bays 5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the CD-ROM Drive with your NEC Versa Notebook
Follow these steps to connect to and use the external CD-ROM drive with your NEC
Versa notebook computer.
1. Power off your NEC Versa notebook.
2. Locate the external CD-ROM drive and cable that ship with your system.
3. Attach the USB connector to either USB port on the system.
Connecting the CD-ROM drive
A – CD-ROM Connector
C – USB port
B – USB Cable
5-6 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Slide the release latch toward the front of the CD-ROM drive to open the cover.
Opening the CD-ROM drive cover
A – Release Latch
5. Put your CD, printed side up, into the circular impression in the drive.
Inserting a CD
6. Close the drive cover.
Using the System Drives and Bays 5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Run the setup, installation program or other instructions provided with the software
application to start or load the CD contents.
Note
Before recording from the external CD-ROM drive to the internal hard disk
drive, disable the internal microphone. To disable the internal microphone, go to Start,
Programs, Accessories, Entertainment, Volume Control. Choose Options, Properties
and remove the check from the Microphone box in the 'Show the following controls'
window.
Disconnecting the CD-ROM Drive
Follow these steps to disconnect the external CD-ROM drive:
1. Double click the Unplug/Eject icon on the toolbar and a box will pop up.
2. Highlight the floppy drive and press Stop.
3. Pull the USB connector out of the port.
CD Care
When handling CDs, keep the following guidelines in mind.
!
!
!
!
!
Always pick up the disc by its edges.
Avoid scratching or soiling either side of the disc.
Do not write on or apply labels to the data side of the disc.
Keep the disc away from direct sunlight or high temperatures.
Clean fingerprints or dust from the disc by wiping it with a soft cloth. Gently brush
the cloth from the center of the disc toward the edge.
Avoid using benzene, paint thinner, record cleaner, static
repellent, or any other chemical on the disc. Chemicals and cleaners can damage the
disc.
5-8 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Disk Drive
Your NEC Versa notebook comes equipped with an internal fixed 2.5-inch, 9.5mm
hard disk drive with a capacity of either 10 or 20 GB, depending on your system
configuration.
When you power on your system for the first time, the hard disk drive contains the
Windows operating system and some resident drivers and utilities.
If for some reason, your hard disk drive becomes unreadable, use the Product Recovery
CD to restore your system to its initial installation state. For details about using the
Product Recovery CD, see Chapter 4, “Using the Operating System and Utilities.”
Memory Modules
Your NEC Versa computer comes standard with 64 megabytes (MB) of random access
memory (RAM) on the motherboard. You can increase system memory to a maximum
of 192 MB with a 128-MB memory module in the memory module bay.
Only install NEC Computers supplied/approved memory
module options to ensure proper functionality of your NEC Versa notebook computer.
Contact your NEC Computers dealer for information about available NEC-supplied/
approved memory modules.
Before handling any internal components, discharge static
electricity from yourself and your clothing by touching a nearby metal surface.
Using the System Drives and Bays 5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a Memory Module
Follow these steps to install a memory module.
1. Make sure that the system is powered off and that no peripheral devices are
attached.
2. Turn over the system and locate the memory module bay.
Locating the memory module bay
A – Memory Module Bay Cover
B – Screw
3. Remove the screw and bay cover.
Removing the screw and bay cover
5-10 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Locate the connectors and alignment notch on the SO-DIMM.
Memory module features
A – Connectors
B – Alignment Notch
5. Locate the memory module expansion port and proceed as follows:
!
!
Hold the module at a 45 degree angle and align the module contacts with the
socket in the system. Push the connector into the socket.
Press down on the edge of the module opposite the contacts until the lock tabs
on the sides snap into place, securing the module.
Installing a memory module
If you are replacing a memory module and need to remove one that is already
installed, do so as follows:
!
Press the locking tabs away from the sides of the module and hold while
gently lifting on the edge of the module.
Using the System Drives and Bays 5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
!
When the edge of the module pops up and is at approximately a 60 degree
angle, pull it from the socket.
Removing an installed memory module
Note
The system switches are also located in the memory module bay. Therefore, if
you need to set any system switches, you might want to do so while the system is
already disassembled. The system switches are defined in Chapter 3.
6. Replace the memory module bay cover and screw.
7. Turn over the system and power on.
5-12 Using the System Drives and Bays
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Communicating with Your NEC Versa
! PC Cards
! Mini PCI LAN
! Internal Modem
! Internet Connections
! IR Port
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Cards
Your NEC Versa DayLite/UltraLite system is equipped with a PC Card slot that
supports Type II PC Cards.
PC Cards are all approximately the same size and vary only in thickness. All have a
standard 68-pin connector. Your NEC Versa notebook supports the installation of the
PC Cards described next.
Type II Cards
Type II cards have a thickness of 5.0 millimeters (mm). Type II cards are often storage
or communication devices such as Static Random Access Memory (SRAM), Read
Only Memory (ROM), Flash Memory, LAN, and Small Computer System Interface
(SCSI). Typically Type II cards include input/output (I/O) features such as modems.
Type II Extended Cards
Many PC Cards are Type II extended cards. The extended card has an additional
physical component that protrudes beyond the traditional card size. The extension can
be as large as 40 mm deep by 9.65 mm high. This extension provides room for
additional electronics as well as a location for external connectors.
Communication Cards
You can use both fax/modem and network PC Cards with your NEC Versa notebook.
Here are some suggestions to help you get the best system performance.
Note
If you are using this unit outside of the United States or Canada, contact a
local NEC Computers dealer for availability information.
!
!
Network Cards — You can use a network card with your system to gain access to a
local area network (LAN).
Fax/Modem Cards — You can use a PC Card modem with your system to
communicate with others via fax, email, or connect to an online service or bulletin
board.
You can insert either card in the slot.
Always insert the fax/modem card before using your fax/modem software application.
If you start the application before inserting the fax/modem card, the application
typically does not find the card.
6-2 Communicating with Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
Storage Cards
When you insert a memory or storage card in an NEC notebook computer, it appears as
a unique drive as long as the system has an available interrupt for the card.
Other Cards
Many other kinds of PC Cards are available for notebook computers. They include the
following cards:
!
Global Positioning System (GPS) — enables the tracking of remote units (for
example, delivery trucks)
!
!
Serial — adds a serial communications port
Multimedia — combines animation and sound
PC Card Slots
Your NEC Versa notebook integrates a CardBus slot for inserting a Type II PC Card.
The 32-bit CardBus also has Zoomed Video support.
Note
The 32-bit CardBus structure not only accepts new CardBus cards but is also
backward compatible.
Using the system’s PC Card slot, you can add optional PC Cards and connect external
devices to your NEC Versa notebook. These devices include peripheral devices, such
as modems, LAN cards, and storage cards.
Communicating with Your NEC Versa 6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a PC Card
To insert a PC Card, follow these steps.
1. Align the card so that the 68-pin connector points towards the slot and the arrow
shows on the top face of the card.
2. Slide the card into the slot. A low tone followed by a high tone lets you know that
the card is fully inserted and recognized. (If you turn off the sound through the
function keys or volume control, no sound is emitted.)
Other tone sequences such as high, then low tones, indicate that the card is
inserted, but the card type is unknown.
Inserting a PC Card
3. Use the software preinstalled on your system to check PC Card slot availability.
Look for the PC Card icon in the Control Panel or on the right side of the taskbar.
It shows which slot contains a PC Card and which is empty.
Removing a PC Card
Follow these steps to remove a PC Card.
1. Double click the PC Card icon on the taskbar.
2. Select the PC Card to remove, and select Stop.
The Windows operating system alerts you if any applications are still using the
card. If all applications using the card are closed, services for that card are shut
down. You receive a message saying that it is safe to remove the card.
3. Press the button on the side of the PC Card in the slot.
6-4 Communicating with Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
Mini PCI LAN
Your NEC Versa system may ship with an internal Mini PCI LAN that allows you to
connect your system to a local area network. The internal LAN is a 10/100Base-TX
interface that supports both Wake on LAN and Network Boot functions.
Connecting the Mini PCI LAN
The mini PCI LAN ships with a LAN adapter cable that is designed with a LAN port
connector and an RJ-45 connector. Follow these steps to take advantage of the internal
mini PCI LAN.
1. Locate the LAN port jack on the left side of the system and open the port cover.
2. Connect the LAN port connector to the LAN port jack.
3. Connect the RJ-45 connector at the other end of the LAN adapter cable to an RJ-45
cable.
Connecting the Mini PCI LAN
A – LAN Cable Jack
C – RJ-45 Connector
B – LAN Adapter Cable Connector
D – LAN (RJ-45) Cable
4. Connect the RJ-45 cable to a local area network.
Communicating with Your NEC Versa 6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Modem
Your NEC Versa system ships with a V.90 internal modem that allows you to connect
to the Internet, send a fax, or access your email.
Note
When using a modem outside the U.S. and Canada, you might need an
international telephone adapter, available at most electronics supply stores.
Use only an industry standard phone line cord when
connecting the internal modem.
Connecting the Internal Modem
Follow these steps to connect an RJ-11 telephone cable to the internal modem.
1. Locate the RJ-11 telephone cable that ships with your NEC Versa notebook. Each
end of the cable has an RJ-11 connector that plugs into a standard telephone outlet.
2. Locate the RJ-11 port on the left side of your system and open the cover.
3. Carefully plug the RJ-11 telephone cable into the RJ-11 port.
Connecting the RJ-11 telephone cable
4. Connect the other end of the RJ-11 telephone cable into an (analog) phone jack.
Now you are ready to configure your modem for Internet or email access!
6-6 Communicating with Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
Internet Connections
Your NEC Versa system is equipped with the Microsoft Windows operating system to
provide a fully-integrated Internet experience. Use the Internet Connection Wizard on
your desktop to configure your system for email and Internet access. Sign up for a new
account or configure your system to use an existing account. The Internet Connection
Wizard offers the following choices:
!
Sign-up for a new Internet account. Take advantage of the Microsoft Internet
Referral Service.
!
!
Transfer an existing Internet account.
Manually configure an Internet account or connect through a local area network
(LAN).
Before using the Internet Connection Wizard to transfer an existing account for email
and Internet access, you need an Internet service provider (ISP) account and some or all
of the following configuration information:
!
!
!
!
!
!
!
the dial-up telephone number
TCP/IP settings
port settings
a user name/logon and password
your email address
the name of a POP3, IMAP, or HTTP server (for incoming mail)
the name of an SMTP server (for outgoing mail)
IR Port
The IR (infrared communication) port on the front of your system lets your NEC Versa
DayLite/UltraLite computer communicate with other devices that also use infrared
technology. The IR port is Infrared Data Association (IrDA) compatible. You can
easily transfer files between your NEC Versa notebook and an IR-equipped desktop, or
print to an IR-equipped printer without using cables.
IR transfer speed ranges from 9.6 Kbit/sec to 4.0 Mbit/sec. Follow these steps to choose
the IR transfer speed:
1. Go to Start, Settings, Control Panel and double click the Wireless Link icon and
select the Hardware tab.
2. Select the Infrared controller from the Device list and click the Properties tab.
Communicating with Your NEC Versa 6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Select the Advanced tab and choose a value for the MaxConnectRate property.
Choose a transfer speed compatible with the receiving device.
4. Click the OK button to save the changes.
Your NEC Versa notebook ships with the IR port disabled.
Before using the IR port for the first time, you must enable the device. See detailed
instructions in the section that follows.
Enabling/Disabling the IR Port in Windows 2000
The IR port on your NEC Versa notebook ships set to Auto. An icon appears on the
taskbar and provides access to the system’s infrared utility. If for any reason you want
to enable (or disable) the IR port to reassign system resources, refer to the following
procedure.
Follows these steps to enable/disable the IR port in Windows 2000.
1. Go to Start, Setting, Control Panel, and double click the Wireless Link icon.
2. Select the Hardware tab and click the Properties button.
3. Select (or deselect) ‘Use the device (enable)’ in the device usage section of the
window.
4. Click OK, then click OK again to close the Wireless Link window.
Using the IR Port
Follow these guidelines when using the IR port to communicate with another infrared
device.
!
Position the NEC Versa notebook no more than three feet away from the IR
peripheral device you are using.
!
Make sure that there is no greater than a 30º angle between the computer and the
device.
6-8 Communicating with Your NEC Versa
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Traveling Tips
! Preparing for Travel
! Packing for Travel
! Using Power Connections
! Getting Through Customs
! Connecting to the Internet
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing for Travel
The NEC Versa DayLite/UltraLite computer makes a natural traveling companion.
With a little preparation you can use the computer practically anywhere you go, to
prepare your business documents, confirm your travel plans, surf the Internet, or simply
stay in touch with those back home!
Here is what you should do before you leave home:
Note
Speed the trip through airport security by carrying a charged system.
Inspectors want to see the screen display a message. The boot message is usually
sufficient.
If your system is fully charged, the inspection only takes a minute or so. Otherwise, be
prepared to attach the AC adapter and power cable. And if you don't have these, the
inspection might include a disassembly of the system.
!
!
Back up your NEC Versa’s hard disk.
Insert a fully charged battery to make sure your system is ready to quickly boot up
at the airport security check.
!
!
!
Fully charge all your batteries.
Tape your business card to your NEC Versa, AC adapter, and batteries.
If you run your system with battery power, maximize battery life by using power-
saving features whenever possible.
!
!
!
Take along any application or data files that you might need on diskette.
Check that you have everything you need before you leave on a trip.
AT&T’s Worldwide Calling Guide. (For more information, see the section later in
this chapter, “Using Your Modem.”)
Packing for Travel
The following are what you should take with you when you travel with your NEC
Versa.
!
!
!
!
Extra fully charged batteries
Single-outlet surge protector
Appropriate AC plug adapter for international voltage requirements
Extra phone cord to access hard to reach wall jacks
7-2 Traveling Tips
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
USB diskette drive if you plan to use diskettes
Copy of proof of purchase for your computer and other equipment or customs
registration form for customs check
!
!
Customer support phone numbers for your software
AC extension cord.
Using Power Connections
With the right accessories, you can run your NEC Versa almost anywhere! Your
system self-adjusts to various power sources. The United States, Canada, and most of
Central and South America use 120-volt alternating current (AC). Most other countries
of the world use 240-volt AC. The NEC Versa adapts to voltages ranging from 100 to
240 volts.
There are a few countries with areas that use direct current (DC) as their main power
source. You need a DC-to-AC converter in particular areas of Argentina, Brazil, India,
Madeira, and South Africa.
To use your system overseas, you need an adapter plug. There are several different
plugs available worldwide. You can buy these at an electronics supply store.
Getting Through Customs
With so many countries in the world, you can be sure that there are a variety of customs
regulations. Plan wisely to get your NEC Versa notebook computer through customs by
carrying the appropriate documentation to assure the customs agent that your system is
not a recent purchase.
Travelers are often asked, when returning to their home country, whether or not they
purchased the computer while outside of the country. Sometimes, the proof of purchase
such as a bill of sale, insurance policy, or purchase receipt is sufficient. Taking along
the purchase receipt for your laptop may sound practical, but may not always suffice,
particularly when the purchaser of the computer is your company and the original
receipt is not available to you.
Another alternative to a proof of purchase document is a Certificate of Registration, a
document that is issued when you register your laptop with the Customs Service prior
to departure. The certificate of registration contains a brief description of your
computer and lists appropriate serial numbers for identification. The document is
available from the customs web site at http://www.customs.ustreas.gov/.
To avoid hassle when moving your system through customs, you may want to obtain a
certificate of registration and carry it whenever you travel out of the country with your
NEC Versa notebook computer.
Traveling Tips 7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to the Internet
Whether you are on a business trip or vacation, connecting to the Internet while you
travel can be expensive and frustrating unless you are prepared. Here are some tips on
how to avoid frustration and expense while on the road.
Connecting Using a Modem
If you have access to a standard telephone jack while you are traveling, you can
probably use your modem for dial-up access to your favorite sites. Follow these
guidelines for connecting and configuring your system.
1. Before leaving home, check with your Internet Service Provider to see if it has:
!
!
!
A local access number at your point of destination.
A toll-free number that can also save you money.
In the absence of a local ISP access number or toll-free number, charging the
call to your home phone can be less expensive than charging the call to your
hotel room.
2. Prepare your system for phone line access in another country.
!
Line access outside of a hotel may require the addition of a “9” preceding the
phone number string.
!
To circumvent unusual dial tone sounds sometimes encountered in hotels, you
may have to modify a system configuration setting to “ignore the dial tone.”
3. Always check with the hotel that the modem phone line is analog. NEVER use your
modem with a digital phone line. Doing so can destroy your modem!
4. Use AT&T’s Worldwide Calling Guide, a resource that provides instructions for
dealing with unfamiliar phone systems. For more information about the calling
guide, access the web site at http:/www.att.com/traveler/ or call 800-435-0812.
Connecting Using a LAN
Many hotels and convention centers now offer direct Internet access for a nominal fee.
If your hotel provides this service, follow these guidelines for connecting and
configuring your system.
!
Many hotels can provide a LAN cable by prearrangement, so you can travel with a
minimum of accessories.
7-4 Traveling Tips
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
!
Plug the LAN cable into your system and the LAN connector in the room or hall
where you want to access the Internet.
After connecting the LAN cable, connect your system to an AC power outlet (if
desired) and power on your system.
Try launching your browser (Microsoft Internet Explorer, or Netscape
Communicator, for example):
— If your TCP/IP network settings are already configured to “Use DHCP for
WINS Resolution” you should be able to access the Internet.
— If your TCP/IP network settings are not set to use DHCP, a help screen may
appear, or you may be directed to call the LAN provider for assistance
configuring your system.
Follow the instructions that are provided to you completely, so your settings
work effectively with the provider’s system.
!
If you have problems, the hotel or center may be able to direct you to a support
technician.
Traveling Tips 7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Using Peripheral Devices
! External Monitor
! External Audio Options
! USB Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
External Monitor
You can add a standard external monitor to your NEC Versa DayLite/UltraLite system
using a display signal cable (usually provided with the monitor) and a monitor transfer
cable.
Follow these steps to connect an external monitor to your NEC Versa notebook.
1. Check that power to both the NEC Versa notebook and the monitor is off.
2. Open the monitor port cover on the left side of the system.
3. Attach the monitor transfer cable connector to the monitor port on the system.
Connecting a monitor
4. Connect the monitor cable to the transfer cable.
5. Connect the monitor power cable and plug it into a properly grounded wall outlet.
6. Follow any setup instructions in the monitor's user's guide.
7. Turn on power to the system and the monitor.
8. Press Fn-F3 to toggle through the video modes: LCD, CRT, or both.
8-2 Using External Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
External Audio Options
The NEC Versa notebook comes equipped with built-in audio ports that let you record
and play sound.
Connect audio jacks, like a microphone, headphones, or external speakers to the audio
ports as follows.
1. Locate the audio port that you want to use.
2. Plug the jack into the appropriate port on the right side of the NEC Versa
notebook.
Audio ports
A – Headphone Jack
B – External Microphone Jack
Note
If you are using external speakers or an external microphone and experience
sound distortion or feedback, use the Fn-F11 key to lower the volume.
Some feedback is caused by having the microphone and speakers too close to each
other, so moving the external audio option away from the unit may also help.
Using External Devices 8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Devices
Your NEC Versa system is equipped with two USB ports that increase your
connectivity choices. The USB ports on your system allow you to connect up to 127
USB-equipped peripheral devices per port to your NEC Versa notebook computer.
These peripherals may include a digital camera, scanner, printer, CD-ROM drive,
modem, mouse, keyboard, telephone, or game device.
USB devices called USB hubs can serve as connection ports for other USB peripherals.
Only one device needs to be plugged into your NEC Versa notebook. Additional
peripherals can be connected in a daisy chain configuration where one device is
connected to another in a series. Up to 127 devices can be connected together in this
way.
Connecting USB devices to your system may reduce battery
life. Always connect your system to an AC power source before connecting USB
devices.
Connect an external USB device to your system as follows.
1. Locate either of the USB port covers on your system and open the cover door(s).
2. Plug in up to 127 USB devices per port to optimize your notebook possibilities.
Connecting USB devices
A – USB Connector
B – USB Port
8-4 Using External Devices
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Using Multimedia
! Audio
! Video
! Multimedia Applications
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio
The NEC Versa notebook provides entertainment-level sound quality with its internal
mono speaker or by plugging stereo speakers or headphones into the external
speaker/headphone jack. It handles MIDI files and digital audio files recognizing
.WAV, .MID, and .AVI formats. The system is 3D-stereo, Sound Blaster® PRO
compatible.
Recording
All information on a computer must be stored in digital form. Analog audio signals
from sources such as tape cassettes or music CDs must be digitized before being
recorded and stored on disk.
You can make microphone level recordings on your NEC Versa computer using the
internal microphone or an external microphone plugged into the microphone jack on
the front of the system.
Note
When using the built-in microphone, make sure the speaker volume is turned
down before using the microphone or feedback may occur.
The following procedure describes how to record using the Microsoft Sound Recorder
and an external microphone plugged into the NEC Versa notebook.
1. To record using an external microphone, attach an external microphone to the
microphone port.
2. Go to Start, Programs, Accessories, Entertainment, and select Sound Recorder.
3. Specify the default sound quality before you record.
!
!
Select Audio Properties from the Sound recorder edit menu.
Use the Effects menu to adjust recording volume, device, and quality settings.
4. Select File, New from the Sound Recorder menu bar.
5. Click the Record button (solid round dot) to begin recording.
6. Click the Stop button (solid rectangle) to stop recording.
7. Select File, Save As from the Sound Recorder menu bar.
8. Name and save your file.
You can play your recording in Sound Recorder or in Windows Media Player. See the
section, “Playing Back,” later in this chapter.
9-2 Using Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Before recording from the external CD-ROM drive to the internal hard disk
drive, disable the internal microphone. To disable the internal microphone, go to Start,
Programs, Accessories, Entertainment, Volume Control. Choose Options, Properties
and remove the check from the Microphone box in the 'Show the following controls'
window.
Microphone
You can capture and record sounds through the internal microphone on the NEC Versa
or through an external microphone that connects to the system through the microphone
port. You can record voice-overs for narration, reminders, or special instructions. See
“Recording,” explained earlier in this chapter, for details about recording sound with
the microphone.
Mixing
With the Microsoft Sound Recorder on your NEC Versa notebook, you can mix data
from two separate .WAV files to create a new sound file. You can also mix the
microphone volume to create soft background sounds to accompany a voice-over or
another more prominent sound. Mixing lets you blend digital and MIDI audio files to
get the final, high-quality soundtrack you want.
See the online help that is available with the Sound Recorder for more information.
Playing Back
You can play back your recorded soundtrack through stereo headphones, the internal
NEC Versa notebook mono speaker, or external stereo speakers. You can play .WAV
and .MID files as well as CD audio. Adjust the volume through the software or with the
Fn-F10/Fn-F11 function keys.
Play audio from files or audio devices as follows. (This example shows how to use the
Windows Media player option in Accessories. You can also play audio through the
Microsoft Sound Recorder. See the Sound Recorder help files for details on its use.)
1. Go to Start, Programs, Accessories, Entertainment, and select the Windows Media
Player option.
2. Click File and specify the file name of your audio source.
3. Once your file is open or your source specified, click the Play button.
4. Click the square Stop button to stop playing the audio.
Using Multimedia 9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Headphones
The NEC Versa notebook headphone port delivers sound at half a watt. Stereo
headphones (available at an electronics supply store) plug in through the headphone
jack located on the front of the NEC Versa notebook. Adjust the volume using the Fn-
F10/Fn-F11 function keys or through the software using the sound horn on the taskbar.
Using the Built-In Speaker
The NEC Versa notebook has a built-in mono speaker that is always available. Adjust
the volume using the Fn-F10/Fn-F11 function keys or through the software using the
sound horn on the taskbar.
Using External Stereo Speakers
For full stereo sound impact, you can plug a pair of stereo speakers into the headphone
jack located on the front of the system. Adjust the volume using the Fn-F10/Fn-F11
function keys or through the software using the sound horn on the taskbar.
MIDI Files
The musical instrument digital interface (MIDI) lets you enhance a presentation by
adding computer-generated music and sound effects. Using MIDI, you can purchase a
wide range of public domain and commercial recordings in MIDI format.
MIDI files require only a fraction of the storage space of digital audio files.
Video
The NEC Versa UltraLite XGA display panels have a high-resolution capability of
1024 x 768 pixels, and the Versa DayLite SVGA has a high-resolution capability of
800 x 600 pixels.
Use the Windows Media Player on your NEC Versa notebook to run full motion, full-
screen MPEG video. For details about using the Windows Media Player, refer to the
section earlier in this chapter, “Playing Back.”
Using Digital Video Files
With commercial video capture hardware and application software, you can plug any
video device, including VCRs, camcorders, and laser disc players into your NEC Versa
notebook and record motion graphics to your hard drive. Use the system’s USB port or
PC Card slot (depending on the video capture hardware and software that you purchase
separately) to plug in the external video device. You can even use a video frame
grabber and store a stream of grabbed stills on your hard disk!
9-4 Using Multimedia
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Animation Files
You can create a dynamic presentation using an animation application. Animation can
illustrate a concept, drive home an important point, or command attention. Graphics
animation can add punch to a presentation with an animated illustration, a flashing
arrow, or a flying logo.
Multimedia Applications
A growing number of multimedia applications are available for PC users. These
multimedia software packages include graphics packages, animation software, and
presentation authoring systems as follows:
!
Animation software allows you to create 3D effects and 3D titles and add interest to
an otherwise static presentation.
!
Authoring packages let you pull all the elements of your design into an exciting,
interactive multimedia presentation.
Using Multimedia 9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Solving System Problems
! Problem Checklist
! Start-Up Problems
! If You Need Assistance
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem Checklist
First check the items in the following list. If these items don't help, see the table that
follows the list.
!
!
Power is on to the computer.
The electrical outlet to which your AC adapter is connected is working. Test the
outlet by plugging in a lamp or other electrical device.
!
!
!
!
All cables are tightly connected.
The display setting is configured correctly.
The display brightness control is adjusted properly.
If using battery power, check that the battery pack is properly inserted and fully
charged.
Troubleshooting
Problem
The system does not
Resolution
If you are operating the system with battery power,
check that the battery pack is correctly inserted. Attach
the AC adapter to recharge the battery.
power on.
If you have the AC adapter attached, check that you
are using a working electrical outlet.
LCD screen is dark and
blank.
Power-saving mode has shut off the backlight. Press a
keyboard key or move the mouse.
The built-in LCD may not be selected. Press Fn-F3
once or twice to select the LCD video mode.
Screen brightness needs adjustment. Use the Fn-F8
and Fn-F9 functions keys.
The system entered Standby mode due to low battery
power. Use the power meter to check battery status.
Plug in the AC adapter or replace the battery pack, and
then press the Power button to resume operation.
Battery power does not
last long.
Use power-saving modes.
Fully charge and discharge the battery several times to
recondition it.
Replace the battery.
Use the Fn-F8 and Fn-F9 functions keys to adjust the
brightness control.
Information on the LCD is
difficult to see.
10-2 Solving System Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Resolution
An optional component
does not work.
Make sure the component is securely installed or
connected. Verify that the system parameter for the I/O
port configuration is set correctly in Setup.
The Power button does
not resume the system
from Standby mode.
If system does not resume, it may have auto
suspended (Standby) on a low battery. Attach the AC
adapter and try again.
The system does not
auto-suspend (Standby).
A disk drive might be busy. Wait until the disk drive
stops and try again.
Upon resuming from a
manual STF the system
displays the message,
”Following system
Power down the system and reseat the memory.
If new memory was installed prior to manual STF,
remove new memory before resuming.
component(s) changed
since last suspend –
System Memory. Do you
want to (B)oot or (P)ower
down?"
Start-Up Problems
The system displays an invalid configuration error message at power on when there are
the following conditions:
!
!
the current configuration information does not match configuration information
stored in Auto Setup, such as when an internal option is added.
the system loses configuration information.
If either condition is true, the system displays an “invalid configuration information”
message.
To continue start-up procedures, press F2 (or F1 when prompted) and run the Setup
utility to set current system parameters.
Note
When the NEC Versa detects an error related to display devices, it cannot
display on either the LCD or a CRT. The system warns you by beeping.
Solving System Problems 10-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Post Error Messages
The NEC Versa computer has a built-in checking program that automatically tests its
components when you turn the system power on. This diagnostic test is called the
Power-On Self-Test (POST). If the system finds a problem during the POST, the
system displays an error message or emits a series of beep signals. If this happens,
follow the instructions in the POST Error Messages table or the Beep Code table, as
appropriate.
If an error message appears before the operating system starts, look up the error
message in the following table. Follow the instructions. If you see other error messages,
the hardware might need repair.
Post Error Messages
Message
Resolution
Address line is short
Error in the address decoding circuitry on the system
board. Contact your NEC Computers service
representative for service.
C: Drive Error
C:Drive Failure
Hard disk drive C: does not respond. Confirm that C:
hard disk type in Setup is correct.
Hard disk drive C: does not respond. You may need to
replace the hard disk drive. Contact your NEC
Computers service representative for service.
Cache Memory Bad, Do
Not Enable Cache
Cache memory is defective. It must be replaced.
Contact your NEC Computers service representative
for service.
CH-2 Timer Error
Most ISA computers include two timers. There is an
error in timer 2. Contact your NEC Computers service
representative for service.
CMOS Battery State Low
CMOS RAM is powered by a battery. The battery
power is low. Connect the system to AC power to
charge the CMOS battery. If the battery does not
charge, contact your NEC Computers service
representative to replace the CMOS battery.
CMOS Checksum Failure
After CMOS RAM values are saved, a checksum value
is generated for error checking. The previous value is
different from the current value. Run Setup to reset the
value.
CMOS System Options
Not Set
The values stored in CMOS RAM are either corrupt or
nonexistent. Run Setup to reset the value.
10-4 Solving System Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Post Error Messages
Message
Resolution
CMOS Display Type
Mismatch
The amount of memory on the system board is different
than the amount in CMOS RAM. Run Setup to reset the
value.
CMOS Time and Date Not Run Setup to set the time and date.
Set
Diskette Boot Failure
The boot diskette is corrupt. It cannot be used to boot
the computer. Use another boot disk and follow the on-
screen instructions.
DMA Error
Error in the DMA controller. Contact your NEC
Computers service representative to replace the CMOS
battery.
DMA#1 Error
Error in the first DMA channel. Contact your NEC
Computers service representative for service.
DMA#2 Error
Error in the second DMA channel. Contact your NEC
Computers service representative for service.
FDD Controller Failure
The BIOS cannot communicate with the floppy disk
controller. Contact your NEC Computers service
representative to check all appropriate connections.
HDD Controller Failure
The BIOS cannot communicate with the hard disk drive
controller. Contact your NEC Computers service
representative to check all appropriate connections.
INTR #1 Error
Interrupt channel 1 failed POST. Contact your NEC
Computers service representative for service.
INTR #2 Error
Interrupt channel 2 failed POST. Contact your NEC
Computers service representative for service.
Invalid Boot Diskette
The BIOS can read the diskette in the disk drive, but
cannot boot the computer. Use another boot diskette.
Keyboard is Locked
Unlock It
The keyboard lock on the computer is engaged. The
computer must be unlocked to continue.
Keyboard Error
There is a timing problem with the keyboard. Set the
Keyboard option in Setup to Not Installed to skip the
keyboard POST routines.
KB/interface Error
There is an error in the keyboard connector. Contact
your NEC Computers representative for service.
Solving System Problems 10-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Post Error Messages
Message
Resolution
Off Board Parity Error
Parity error in an expansion slot. Contact your NEC
Computers service representative to be sure that the
memory module is installed correctly.
The error format is:
OFF BOARD PARITY ERROR
ADDR(HEX) = (XXXX)
XXXX is the hex address where the error occurred.
On Board Parity Error
Parity Error ????
Parity error in system board memory. Contact your
NEC Computers service representative for service.
Parity error in system memory at an unknown address.
Contact your NEC Computers service representative
for service.
Beep Codes
Fatal errors that occur during POST are communicated through a series of beeps. All
beep code errors, except beep code 8, are fatal errors and do not allow the system to
continue to boot.
If beep codes occur during POST, check the items in the Problem Checklist (at the start
of this chapter), verify that all the hardware is set up properly and securely connected,
and try rebooting. If you still get a beep code, go to the section “If You Need
Assistance” at the end of this chapter.
Beep Codes are listed in the table that follows.
Beep Codes
Number of
Beeps
Error
Description
1
Refresh Failure
The memory refresh circuitry on the
motherboard is faulty.
2
3
4
Parity Error
Parity error in the first 64 KB of
memory.
Base 64 KB Memory
Failure
Memory failure in the first 64 KB.
Timer Not Operational
Memory failure in the first 64 KB of
memory or Timer 1 on the
motherboard is not functioning.
10-6 Solving System Problems
Download from Www.Somanuals.com. All Manuals Search And Download.
Beep Codes
Number of
Beeps
Error
Description
5
Processor Failure
The CPU on the motherboard
generated an error.
6
Gate A20 Failure
The keyboard controller may be bad.
The BIOS cannot switch to protected
mode.
7
8
Processor Exception
Interrupt Error
The CPU generated an exception
interrupt.
Display Memory
Read/Write Error
The system video adapter is either
missing or its memory is faulty. (This
is not a fatal error.)
9
ROM Checksum Error
The ROM checksum value does not
match the value encoded in the BIOS.
10
CMOS Shutdown
Register Read/Write
Error
The shutdown register for CMOS
RAM failed.
11
Cache Error/External
Cache Bad
The external cache is faulty.
If You Need Assistance
If you have a problem with your computer, first review the checklist and
troubleshooting table at the beginning of this chapter.
If you still have a problem, see Chapter 11, “Getting Service and Support,” for details
about contacting NEC Computers.
Note
If you purchased and are using this product outside the U.S. or Canada,
please contact the local NEC Computers office or their dealers for the support and
service available in your country.
Solving System Problems 10-7
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Getting Service and Support
! Service and Support Contact Information
! Web Site
! FTP Site
! Support Services
! Email/Fax to Support Services
Download from Www.Somanuals.com. All Manuals Search And Download.
Service and Support Contact Information
Service
Contact Information
NEC Computers Inc. Web Site
Support Services Web Site
FTP Site
www.neccomp.com
support.neccomp.com
ftp.neccsdeast.com/pub
Support Services (U.S. and
Canada customers only).
800-632-4525
Fax: 801-579-1552
Email to Support Services through
a commercial online service or the
Internet.
Internet email address:
Note
If you purchased your computer outside the U.S. or Canada, please contact
the local NEC office or their dealers for support and service.
If you have access to a telephone, modem, and/or fax machine, you can use these
services to obtain information about your system at any time, day or night, seven days a
week.
Not only do these services provide information about your NEC system, they can also
be used to answer your questions and help solve any problems you may have with your
system, should that ever be necessary.
11-2 Getting Service and Support
Download from Www.Somanuals.com. All Manuals Search And Download.
Web Site
If you have a modem or are connected to a network, you can access the NEC
Computers web site. You can do this through a commercial online service or through
your Internet account. The web site contains general information about NEC
Computers and its products, press releases, reviews, a reseller locator, and service and
support information.
Look in the Service and Support area for the following:
!
technical documentation, including Frequently Asked Questions, reference manuals,
and warranty information
!
!
BIOS updates, drivers, and Setup Disk files to download
contact information, including telephone numbers for Technical Support and links
to vendor web sites
!
!
an automated email form for your technical support questions
a password-accessible area for resellers
To access The NEC Computers Home Page, enter the following Internet Uniform
Resource Locator (URL) in your browser:
http://www.neccomp.com/
To access The NEC Computers Support Page, enter the following Internet Uniform
Resource Locator (URL) in your browser:
http://support.neccomp.com/
FTP Site
Use the Internet to access the NEC Computers FTP (file transfer protocol) site to
download various files (video drivers, printer drivers, BIOS updates, and Setup Disk
files). The files are essentially the same files as on the NEC Computers web site.
To access The NEC Computers FTP site, enter the following Internet ftp address
through your service:
ftp.neccsdeast.com/pub
Once in the FTP site, select the pubs directory link and follow the links to choose and
download the file(s) you want.
Getting Service and Support 11-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Support Services
NEC Computers also offers direct technical support through Support Services. (NEC
Computers Support Services is for U.S. and Canadian customers only; international
customers should contact the local NEC office or dealer for the support and service
available in their country.)
Direct assistance is available 24 hours a day, 7 days a week. Call the NEC Computers
Support Services, toll free, at 800-632-4525 (U.S. and Canada only) for the following
support and to find out about the extended service programs available for purchase.
!
!
System hardware — toll-free phone support is limited to the length of the three-year
limited warranty.
Preinstalled software — toll-free phone support for 90 days from the time of your
first call to the Support Services.
Please have available your system’s name, model number, serial number, and as much
information as possible about your system’s problem before calling.
For outside the U.S. or Canada, please contact your local NEC office or dealer for the
support and service available in your country.
Email/Fax to Support Services
The NEC Computers Support Services offers technical support by email if you have
Internet access. The email address is:
You can also fax technical questions to Support Services if you have access to a fax
machine or fax/modem. The fax number is:
801-579-1552
When using the email or fax support service, you should include the word “notebook”
in the subject field for prompt response from the appropriate technical person.
You should provide as much specific information about your questions as possible.
Also, if you are sending a fax, please include your voice telephone number, fax
number, model number and system serial number with the question. You will receive a
response to your questions within one business day.
11-4 Getting Service and Support
Download from Www.Somanuals.com. All Manuals Search And Download.
A
Setting Up a Healthy Work Environment
! Making Your Computer Work for You
! Arrange Your Equipment
! Adjust Your Chair
! Adjust Your Input Devices
! Adjust Your Screen or Monitor
! Vary Your Workday
! Pre-Existing Conditions and
Psychosocial Factors
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Your Computer Work for You
Computers are everywhere. More and more people sit at computers for longer periods
of time. This appendix explains how to set up your computer to fit your physical needs.
This information is based on ergonomics - the science of making the workplace fit the
needs of the worker.
Some nerve, tendon, and muscle disorders (musculoskeletal disorders) may be
associated with repetitive activities, improper work environments, and incorrect work
habits. Examples of musculoskeletal disorders that may be associated with certain
forms of repetitive activities include: carpal tunnel syndrome, tendinitis, tenosynovitis,
de Quervain's tenosynovitis, and trigger finger, as well as other nerve, tendon, and
muscle disorders.
Prolonged or improper use of a computer workstation may
pose a risk of serious injury. To reduce your risk of injury, set up and use your computer
in the manner described in this appendix.
Although some studies have shown an association between increasing hours of
keyboard use and the development of some musculoskeletal disorders, it is still unclear
whether working at a computer causes such disorders. Some doctors believe that using
the keyboard and mouse may aggravate existing musculoskeletal disorders.
Note
Contact a doctor if you experience pain, tenderness, swelling, burning,
cramping, stiffness, throbbing, weakness, soreness, tingling and/or numbness in the
hands, wrists, arms, shoulders, neck, back, and/or legs.
Some people are more susceptible to developing these disorders due to pre-existing
conditions or psychosocial factors (see “Pre-existing Conditions and Psychosocial
Factors” later in the appendix).
To reduce your risk of developing these disorders, follow the instructions in this
appendix. If you experience discomfort while working at your computer or afterwards,
even at night, contact a doctor as soon as possible. Signs of discomfort might include
pain, tenderness, swelling, burning, cramping, stiffness, throbbing, weakness, soreness,
tingling and/or numbness in the hands, wrists, arms, shoulders, neck, back, and/or legs.
Note
To increase your comfort and safety when using your notebook computer as
your primary computer system at your home or office, note the following
recommendations:
!
!
use a separate, external keyboard attached to your notebook computer
use a separate, external monitor attached to your notebook computer.
A-2 Setting Up a Healthy Work Environment
Download from Www.Somanuals.com. All Manuals Search And Download.
Arrange Your Equipment
Arrange your equipment so that you can work in a natural and relaxed position. Place
items that you use frequently within easy reach. Adjust your workstation setup to the
proper height (as described in this appendix) by lowering the table or stand that holds
your computer equipment or raising the seat height of your chair. Position your
notebook computer directly in front of you for increased safety and comfort.
Adjust Your Chair
Your chair should be adjustable and stable. Vary your posture throughout the day.
Check the following:
!
!
!
Keep your body in a relaxed yet upright position. The backrest of your chair should
support the inward curve of your back.
Use the entire seat and backrest to support your body. Tilt the backrest slightly (90°
to 105°). The angle formed by your thighs and back should be 90° or more.
Your seat depth should allow your lower back to comfortably contact the backrest.
Make sure that the backs of your lower legs do not press against the front of the
chair.
!
!
!
!
Extend your lower legs slightly so that the angle between your thighs and lower
legs is 90° or more.
Place your feet flat on the floor. Only use a footrest when attempts to adjust your
chair and workstation fail to keep your feet flat.
Be sure that you have adequate clearance between the top of your thighs and the
underside of your workstation.
Use armrests or forearm supports to support your forearms. If adjustable, the
armrests or forearm supports should initially be lowered while all the other
adjustments discussed in this appendix are made. Once all these adjustments are
completed, raise the armrests or adjust the forearm supports until they touch the
forearms and allow the shoulder muscles to relax.
Adjust Your Input Devices
Note the following points when positioning your notebook computer or any external
input devices.
!
Position your keyboard directly in front of you. Avoid reaching when using your
keyboard or mouse.
Setting Up a Healthy Work Environment A-3
Download from Www.Somanuals.com. All Manuals Search And Download.
!
!
If you use a mouse, position it at the same height as the keyboard and next to the
keyboard. Keep your wrists straight and use your entire arm when moving a mouse.
Do not grasp the mouse tightly. Grasp the mouse lightly and loosely.
Adjust the keyboard height so that your elbows are near your body and your
forearms are parallel to the floor, with your forearms resting on either armrests or
forearm supports, in the manner described previously. If you do not have armrests
or forearm supports, your upper arms should hang comfortably at your sides.
!
!
Adjust the keyboard slope so that your wrists are straight while you are typing.
Type with your hands and wrists floating above the keyboard. Use a wrist pad only
to rest your wrists between typing. Avoid resting your wrists on sharp edges.
!
!
Type with your wrists straight. Instead of twisting your wrists sideways to press
hard-to-reach keys, move your whole arm. Keep from bending your wrists, hands,
or fingers sideways.
Press the keys gently; do not bang them. Keep your shoulders, arms, hands, and
fingers relaxed.
Adjust Your Screen or Monitor
Correct placement and adjustment of the screen or external monitor can reduce eye,
shoulder, and neck fatigue. Check the following when you position the screen or
external monitor.
!
!
Adjust the height of your screen or external monitor so that the top of the screen is
at or slightly below eye level. Your eyes should look slightly downward when
viewing the middle of the screen or external monitor.
Position your screen or external monitor no closer than 12 inches and no further
away than 28 inches from your eyes. The optimal distance is between 14 and 18
inches.
!
!
Rest your eyes periodically by focusing on an object at least 20 feet away. Blink
often.
Position the screen or external monitor at a 90° angle to windows and other light
sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling
lights do not reflect on your screen or external monitor.
!
!
If reflected light makes it hard for you to see your screen or external monitor, use an
anti-glare filter.
Clean your screen or external monitor regularly. Use a lint-free, non-abrasive cloth
and a non-alcohol, neutral, non-abrasive cleaning solution or glass cleaner to
minimize dust.
A-4 Setting Up a Healthy Work Environment
Download from Www.Somanuals.com. All Manuals Search And Download.
!
Adjust the screen or external monitor's brightness and contrast controls to enhance
readability.
!
!
Use a document holder placed close to the screen or external monitor.
Position whatever you are looking at most of the time (the screen or reference
material) directly in front of you to minimize turning your head while you are
typing.
!
Get regular eye check-ups.
Vary Your Workday
If you use your computer for prolonged periods, follow these instructions.
!
!
Vary your tasks throughout the day.
Take frequent short breaks that involve walking, standing, and stretching. During
these breaks, stretch muscles and joints that were in one position for an extended
period of time. Relax muscles and joints that were active.
!
!
Use a timer or reminder software to remind you to take breaks.
To enhance blood circulation, alter your sitting posture periodically and keep your
hands and wrists warm.
Note
For more information on workstation setup, see the American National
Standard for Human Factors Engineering of Visual Display Terminal Workstations.
ANSI/HFS Standard No. 100-1988. The Human Factors Society, Inc., P.O. Box 1369,
Santa Monica, California 90406.
Pre-Existing Conditions and
Psychosocial Factors
Pre-existing conditions that may cause or make some people more susceptible to
musculoskeletal disorders include the following: hereditary factors, vascular disorders,
obesity, nutritional deficiencies (e.g., Vitamin B deficiency), endocrine disorders (e.g.,
diabetes), hormonal imbalances, connective tissue disorders (e.g., arthritis), prior
trauma (to the hands, wrists, arms, shoulders, neck, back, or legs), prior
musculoskeletal disorders, aging, fluid retention due to pregnancy, poor physical
conditioning and dietary habits, and other conditions.
Psychosocial factors associated with these disorders include: workplace stress, poor job
satisfaction, lack of support by management, and/or lack of control over one's work.
Setting Up a Healthy Work Environment A-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact a doctor if you experience pain, tenderness, swelling, burning, cramping,
stiffness, throbbing, weakness, soreness, tingling and/or numbness in the hands, wrists,
arms, shoulders, neck, back, and/or legs.
This appendix was prepared in consultation with Dr. David Rempel of the University of
California/San Francisco Ergonomics Program and Mr. M.F. Schneider of
HUMANTECH, Inc., Ann Arbor, Michigan.
A-6 Setting Up a Healthy Work Environment
Download from Www.Somanuals.com. All Manuals Search And Download.
B
Specifications
! System Components
! Memory Map
! Interrupt Controllers
Download from Www.Somanuals.com. All Manuals Search And Download.
System Components
The following system component specifications are standard except where noted.
Note
notice.
The components that ship with the system are subject to change without
System Processor
600-MHz Transmeta Crusoe TM5600 microprocessor
Architecture
64-bit Peripheral Component Interconnect (PCI)
Random Access Memory
!
Standard Main Memory
— 64-MB SDRAM SO-DIMM on motherboard, 125-MHz SDRAM
One memory slot
!
— supports 128-MB SO-DIMM
— Maximum 192-MB
!
!
Video Ram — 4 MB-SGRAM
Cache Memory
— L1: 64-KB code and 64-KB data 8/16 way set associate, write back (data)
— L2: 512-KB built-in (4-way)
— operates at full core speed
— 4 GB cacheable range
Read-Only Memory
2-MB x 8-bit, Flash ROM
Calendar Clock
Year/month/day/hour/minute/second maintained by internal back-up battery
B-2 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Input/Output (I/O) Facilities
Integrated industry-standard interfaces
!
Infrared — 1 FIR
VGA — 1 port, 20-pin (via CRT cable)
!
!
!
!
!
!
!
Mono microphone — 1 port, 3-pin, Mini Pin Jack
Stereo Headphones — 1 port, stereo 3-pin, Mini Pin Jack
DC In — 1 port, for AC adapter cable
USB ports — 2 ports, 4-pin
Modem — 1 port, RJ-11 modular jack
LAN I/F — 1 port, 26-pin
Speakers
One built-in, 1 watt (W)
!
!
!
Mono speaker
Sound Blaster PRO compatible
ESSR Solo-1 PCI AudioDrive + ESS 1946S
!
Software-controlled sound and beep volume
PC Card Slots
!
One 32-bit card slot for a Type II card, 5 V or 3.3 V interface
32-bit CardBus support
!
LCD Panel
!
10.4-inch high-resolution active-matrix Thin Film Transistor (TFT)
— Colors — 24 bit
— ATI® RAGE™ MOBILITY™-M graphics accelerator with 8-MB VRAM and 2X
AGP graphics capability
— Versa UltraLite — Backlit, XGA (1024 x 768) resolution
— Versa DayLite — Reflective, SVGA (800 x 600) resolution
Specifications B-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard
Membrane 86 keys with country-specific QWERTY-key layout
!
!
!
!
!
!
!
Function keys — 12 keys
Cursor Control keys — 8 keys; arrow keys arranged in inverted T layout
Numeric keypad — embedded
Fn key — function key for ROM-based key functions
Stroke — 2.5 mm
Height — 6 mm
Pitch — 17.5 mm
External Floppy Diskette Drive
!
!
!
!
Size — 3.5-inch
Capacity — 1.44 MB1 (formatted), 2 MB1 (unformatted)
Transfer Rate — 250 to 500 K/bps
Number of tracks — 160
Hard Disk Drive
Specifications vary depending upon model:
!
!
!
!
!
!
!
Busmaster IDE, Ultra DMA/33 support
Capacity — Internal 10- or 20-GB1
Drive height — 9.75 mm
Read/write track-to-track seek rate — 3 ms
Average seek time — 12 ms – 14 ms
Revolutions per minute — 4200
Data transfer rate
— 16.6 MB/sec (PIO mode4/DMA mode2)
— 66.6 MB/sec (ultra DMA mode 4)
1When referring to storage capacity, GB stands for one billion bytes and MB stands for one million bytes. Some
utilities may indicate varying storage capabilities. Total user-accessible capacity may vary depending on
operating environments.
B-4 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
24X-Maximum/10x Minimum Variable Speed CD-ROM Drive
!
!
!
!
Type — 5-inch CD-ROM Pack
Average Data Transfer Rates — 1545 KB/second to 3600 KB/second
Burst Transfer Rate — 16.7 MB/second, PIO mode4/DMA mode
Average Access Time
— 190 ms (Random)
— 350 ms (Fullstroke)
!
!
Interface — IDE (ATAPI)
Photo CD Compatibility — Single Session/Multisession Photo CD,
Video CD (CD-1, CD-I Ready, CD-G, CD-Plus, CD-DA,
CD-EXTRN, and CD-ROM XA mode 2)
Mini PCI LAN/Xircom® Modem Combo
!
!
!
!
!
!
!
!
10BASE-T and 100BASE-TX compatible
IEEE 802.3 and IEEE 802.3u compliant
10/100 Mbps transmission rate
10/100M, LINK, and ACT diagnostic LEDs
V.90 data/V.17 fax soft, MMX optimized
K56flex™ compatible
SmartDAA™ technology
V.80 synchronous access mode
Power
AC Adapter
!
!
!
Input Voltage — 100 to 240 volts (V) AC, 50 or 60 Hz, Maximum 2.8A
Output Voltage — 16.0 V DC, 45 Watt
Australia, Europe, and Asia use an AC power cable specific to each country's
standards.
Specifications B-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery Pack
!
!
!
Main Battery — 9 Cell Lithium Polymer; 10.8 volts, 1800mAH
Secondary Battery — 3 cell Lithium-Ion; 11.1volts, 2500 mAH
Recharging Time — Approximately 8 hours when the system is on, 4.5 hours when
off.
Dimensions
!
!
!
Width — 10.4 in. (264 mm)
Depth — 8.3 in. (211 mm)
Height — 1.06 in. (27 mm)
Weight
3.01 lb. (1.37 kg) — without external drives
Recommended Environment
Operation
!
!
Temperature — 41°F to 95°F (5°C to 35°C)
Relative Humidity — 20% to 80% (Noncondensing)
Storage
!
!
Temperature — -4°F to 104°F (-20°C to 40°C)
Relative Humidity — 20% to 80% (Noncondensing)
B-6 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Map
The system supports system and video shadowing, both controlled through
complementary metal oxide semiconductor (CMOS). The system supports BIOS as a
cacheable area with write protection. The following table shows the system's memory
map.
System Memory Map
Memory Space
Size
Function
FFFE 0000H-FFFF FFFFH
128K
Upper ROM, System and Video
BIOS
FFFC 0000H-FFFD FFFFH
128K
Lower ROM, Power Management
BIOS
FFFA 0000H-FFFB FFFFH
FFF8 0000H-FFF9 FFFFH
128K
128K
New Extended Area
FFF0 0000H-FFF7 FFFFH
0A00 0000H-0BFF FFFFH
512K
1MB Extended, BIOS 512KB
Extended Memory
Up to 176MB
000F 0000H-000F FFFFH
000E 0000H-000E FFFFH
64K
64K
System BIOS, 128K
000A 0000H-000B FFFFH
000C 0000H-000D FFFFH
0000 0000H-0009 FFFFH
128K
128K
640K
Video Buffer Ram
Available for Applications
System/Application Memory
Specifications B-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Interrupt Controllers
Using interrupts, hardware can request software services. If non-Plug and Play software
is being used, the interrupt may need to be moved for software application or driver
compatibility. Some interrupts cannot be moved. Fifteen interrupts can be used with a
cascade connection of 8259INTC x 2. The table shows default interrupt level
assignments 0 through 15, in order of decreasing priority.
Priority
Name
Device
0
IRQ00
Internal Timer 1
Keyboard
PIC
1
IRQ01
2
IRQ02
3
IRQ08
Real-time Clock
SCI, CardBus, Modem, LAN
Video
4
IRQ09
5
IRQ10
6
IRQ11
Sound
7
IRQ12
Mouse
8
IRQ13
Coprocessor
IDE Controller
(Free)
9
IRQ14
10
IRQ15
11
IRQ03 or IRQ04
IRQ04 or IRQ03
IRQ05 or IRQ09
IRQ06
(Free) Infrared Port1
12
(Free)
13
USB
14
(Free)
15
IRQ07
(Free)
1 When enabled.
B-8 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
C
Frequently Asked Questions
! External Mouse
! Display
! PC Cards
! Diskette Drive
! Booting
! Power Management
! Miscellaneous
Download from Www.Somanuals.com. All Manuals Search And Download.
External Mouse
How can a mouse and an external keyboard be connected to the
notebook at the same time?
The NEC Versa DayLite/UltraLite is equipped with two USB ports that
allow you to connect any combination of two USB devices, at the same time. If you
purchase a USB mouse and a USB keyboard, simply plug each device into any of the
USB ports on your system. The USB ports allow you to connect up to 127 USB-
equipped peripheral devices per port to your NEC Versa notebook computer.
Display
What is the maximum resolution I can run in simultaneous mode?
The maximum resolution in simultaneous mode is 1024 x 768 for XGA
TFT or 800 x 600 for SVGA TFT panels, depending on the capabilities of the external
monitor. You can obtain higher resolutions if you connect a higher-resolution external
monitor and switch to CRT-only mode.
How can I change my video drivers?
Go to Start, Settings, and Control Panel. In the control Panel, double click
the Display icon. Click the Settings tab. Next, click the Advanced button, select the
Adapter tab, click on Properties, select the Driver tab and click on Update Driver.
Proceed as prompted to find the video driver you need, and if applicable, insert a
diskette or CD into the appropriate drive and click on Have Disk. Follow the on-screen
instructions to install the new video driver.
C-2 Frequently Asked Questions
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Cards
Why do certain PC Cards cause my battery life to drop noticeably?
Certain hard disk cards and wireless radio cards consume more power
than others and can impact battery life. When not using any PC Card, close all
applications using the card and pop it part of the way out of the slot to save power.
In Setup, I disabled or reconfigured peripheral devices (like the ports
or sound), yet I am unable to use the freed IRQs or I/O address resources with my
PC Cards. Why?
To provide a stable platform free of conflicts, NEC computers excluded
some resources from PC Card use.
Diskette Drive
Why can't I boot from the external USB diskette drive?
To boot from the diskette drive, be sure that you have a diskette in the
drive containing operating system files. Be sure to check the Boot Device Setup
parameters in the BIOS Setup Utility to determine the designated sequence of boot
devices. See Chapter 3, “Using the BIOS Setup Utility.”
See your operating system documentation for information about creating system
diskettes.
Frequently Asked Questions C-3
Download from Www.Somanuals.com. All Manuals Search And Download.
What happens if I leave a diskette in my diskette drive?
Shutting down your system with a diskette in the diskette drive can
damage the data on your diskette and your diskette drive. You should remove the
diskette before powering off.
How do I format a diskette?
Double click on the My Computer icon and then right click (click the
right-hand mouse button) on the floppy diskette drive icon. Select Format and choose
the format process that best suits your needs.
To format high density 1.44-MB diskettes – In DOS, type format a: and press Enter. If
you want a bootable diskette, type format a:/s and press Enter.
What type of diskette do I use in my diskette drive?
Your NEC Versa DayLite/UltraLite ships with an external 1.44-MB USB
diskette drive that uses 3.5-inch high density (HD) diskettes. These diskettes are also
called double-sided, high-density (DSHD) diskettes. You can store 1.44 MB of
information on these diskettes.
Your diskette drive can also use 3.5-inch double-sided, double-density (DSDD)
diskettes. These diskettes only hold 720 kilobytes of data – about half the amount of
data that 1.44-MB diskettes hold.
C-4 Frequently Asked Questions
Download from Www.Somanuals.com. All Manuals Search And Download.
Booting
What is the difference between a warm boot and a cold boot?
A warm boot restarts the system while system power is on. A warm boot
is also a software reset. A warm boot clears volatile system memory and reloads the
operating system.
In Windows 2000, press Ctrl, Alt, and Del twice to restart the system or go to Start,
Shut Down, Restart the computer. In DOS mode, press Ctrl, Alt, and Del to warm boot
the system.
A cold boot is a system start with power off. A cold boot also resets the hardware. It
checks the hardware and reloads the operating system.
Slide the system unit Power button to perform a cold boot or go to Start, Shut Down, to
shut down the computer. If power is on, turn the power off using the system unit Power
button, wait at least five seconds, and then turn the power on.
Power Management
Does my system come with power management features enabled?
Your system’s default settings are configured with power management
features enabled when on DC (battery) power and disabled when on AC power. Use the
BIOS Setup Utility to modify the default settings, if desired.
If you do not use the keyboard, mouse, or drives for the preset length of inactive time,
your screen goes blank and your system goes into a power saving mode of operation.
This is known as an LCD time-out.
When your screen goes blank, before the system goes into Standby mode (power status
LED blinks), just press the Space Bar or move your mouse to reactivate your system.
Frequently Asked Questions C-5
Download from Www.Somanuals.com. All Manuals Search And Download.
What is the purpose of Suspend to RAM (Standby)?
You can initiate full Suspend-to-RAM by accessing Start, Shut Down,
Standby. This places the system in a deeper state of “sleep” and requires that you slide
the Power button forward to resume operation.
Putting your system into Standby initiates the Standby power-saving mode and is a
convenient way of conserving energy when you are going to be away from your system
for a short period of time.
What is the function of Suspend-to-File (Hibernation)?
Suspend-to-File (Hibernation) provides the greatest power savings by
putting the system into a maximum power shutdown. When the system goes into STF
mode, it saves data and system status and then shuts off power to all components. STF
mode lets you save power without first saving your work. Resuming from STF mode
requires less time than performing a cold boot.
Your system must be configured for STF/Hibernation. In Windows Power Management
Properties, check the box labeled “enable hibernate support,” under the Hibernate tab.
How do I bring my system out of Standby mode?
Sliding the Power button forward brings the system out of Standby mode.
C-6 Frequently Asked Questions
Download from Www.Somanuals.com. All Manuals Search And Download.
What is a time-out?
A time-out is the amount of time your system or a particular component is
inactive.
Miscellaneous
How do I set the time and date?
You can change the time and date in Windows 2000 as follows.
!
!
Double click the time in the lower right corner of the screen.
Change the date and time as needed.
How do I speed up my application?
If the application you are using runs really slow, close any other
applications you are not using - this should speed things up.
If your application still runs slow, you might consider installing additional memory.
(See “Memory Modules” in Chapter 5.) If upgrading after initial purchase, one or more
of the memory modules provided with the system may have to be replaced with
Also, refer to your operating system's documentation for tips on optimizing system
performance.
Frequently Asked Questions C-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Why do I get a message “Insufficient memory” when I run some
games? I have 64 MB of memory.
The “Insufficient memory” refers to the 640 kilobytes of (DOS) base
memory. Since there are drivers being loaded at power on, the amount of memory can
be lower than the game requires.
Contact the game manufacturer and request advice to create a boot disk. This loads
only the drivers necessary to run the game.
How do I find help in a Windows application?
If you need help in a Windows application, click on a Help button or Help
menu item. Most applications provide online help. If the application doesn't provide
these, try pressing F1.
How do I save a file?
You save a file by selecting File, then Save, from the drop down menu. If
the file was not previously named, you will be prompted for a file name. In Windows
2000 you can use up to 255 characters to name a file.
C-8 Frequently Asked Questions
Download from Www.Somanuals.com. All Manuals Search And Download.
I'm having a problem using the IR port. What can I do?
Use the taskbar icon to enable the IR port. Next, enter the BIOS Setup
utility to verify that the IR serial port setting contains an available COM port and IRQ
setting.
Check that both the sending and receiving system and device are using the same
transmission software.
If you are transmitting underneath a fluorescent light, try repositioning the system and
device so that they are not directly under the fluorescent light.
Reference the IR setup online help for further information.
Frequently Asked Questions C-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
A
AC adapter
A device that connects an NEC Versa notebook computer and an AC wall outlet to
provide AC power for running the system and recharging the battery.
A/D conversion
The process of converting an analog signal into a digital signal.
AGP
Advanced Graphics Port is an interface specification designed for the throughput
demands of 3D graphics. AGP introduces a point-to-point channel allowing the
graphics controller direct access to main memory, increases bandwidth to 266-MBps,
and supports throughputs of 533-MBps and 1.07-GBps.
animation
The art of making things appear to move in two-dimensional (2D) or three-dimensional
(3D) space and making events happen over time.
applications programs
Software designed to perform specific functions, like solving business or mathematical
problems.
audio
The range of acoustic, mechanical, or electrical frequencies that humans hear.
B
base RAM
Area of system memory between 0 and 640 kilobytes available to the user for the
operating system and application programs.
BIOS
Basic Input Output System. A collection of computer routines, usually burnt into ROM,
that controls the real-time clock, keyboard, disk drives, video display, and other
peripheral devices.
bit
Binary digit. The smallest unit of computer data.
Glossary
1
Download from Www.Somanuals.com. All Manuals Search And Download.
bits per second
(bps) A unit of transmission. Also called baud rate.
board
Printed circuit board (PCB). Board on which computer components are soldered and
thin wires are printed to connect the components.
boot
To start up a computer. See cold boot and warm boot.
bus
An electronic circuit within a computer used for transmitting data or electrical power
from one device to another.
byte
Group of eight contiguous bits.
C
CardBus
A 32-bit high-performance bus defined by the PC Card Standard and released by the
PCMCIA standards body and trade associations. CardBus offers wider and faster 32-bit
bus and bus mastering operation for improved adapter performance and can operate at
speeds up to 32-MHz.
CD
Compact disc. A polished metal platter capable of storing digital information. The most
prevalent types of compact discs or those used by the music industry to store digital
recordings and CDs used to store computer data. Both types are read-only, which
means that once the data is recorded onto them, they can only be read or played.
CD audio
Also called digital audio, uses the same format as conventional music CDs. CD audio
sounds have been digitized at a high sampling rate.
CD-ROM drive
Compact Disc Read-Only Memory. A computer-controlled device that reads high-
capacity optical discs and sends the output to the computer.
CD-RW drive
Compact Disc Read/Write. A computer controlled device that reads from and writes to
high capacity optical discs.
clock
Electronic timer used to synchronize computer operations.
2
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
CMOS
Complementary Metal Oxide Semiconductor. A chip that contains nonvolatile memory
in the NEC Versa notebook. CMOS is backed up by an internal battery that preserves
clock/calendar data and system configuration parameters stored in CMOS.
cold boot
Process of starting up the computer by turning on the power. If power is already on, the
process means to turn off the computer and turn it on again. A cold boot reinitializes all
devices.
CRT
Cathode-Ray Tube. A type of display screen used in desktop monitors. It forms the
screen image using tiny dots called, pixels. See also LCD.
cursor
A movable image on the display screen that indicates where the next entered data
appears.
D
default
A value, option, or setting that the computer automatically selects until you direct it
otherwise.
digital audio
Recorded sounds such as speech and sound effects. These are played back by the audio
circuit’s Digital-to-Analog Converter (DAC).
digital sound
A description of a sound wave that consists of binary numbers.
digitizing
The process of converting an analog signal into a digital representation.
diskette
A thin flexible platter coated with a magnetic material for storing information.
diskette drive
A magnetic drive that writes on and retrieves data from a diskette.
E
enhanced VGA
A video interface that offers more colors or higher resolution than VGA.
Glossary
3
Download from Www.Somanuals.com. All Manuals Search And Download.
extended RAM
The area of RAM above the first megabyte of memory in the system available for
enhancing system performance.
F
FIR
Fast Infrared, an infrared technology that sends data at 4.0 Mbit/second
(4 million bits per second).
FM synthesis
A technique for synthesizing sound that uses a combination of modulated sine waves to
produce different waveforms.
function key
The set of keys on the keyboard (usually F1 through F12) that let you get help and error
message information or quickly select frequently used commands.
H
hard disk
A rigid magnetic storage device that provides fast access to stored data.
hardware
The electrical and mechanical parts from which a computer is made.
hertz
(Hz) A unit of frequency equal to one cycle per second.
hot key
Combination of two or three keys that you press simultaneously for a particular
function.
I
input/output
(I/O) The process of transferring data between the computer and external devices.
IDE
Intelligent Drive Electronics. A hard disk drive type that has controller electronics built
into the drive and delivers high throughput.
4
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
infrared
Technology that uses infrared waves to communicate data between the IR-equipped
devices without the use of cables. The IR port on the NEC Versa is Infrared Data
Association (IrDA) compatible.
interface
A connection that enables two devices to communicate.
interrupt
A special control signal from an I/O device that diverts the attention of the
microprocessor from the program to a special address.
K
kilobyte
(KB) 1024 bytes.
L
LAN
Local Area Network.
LCD
Liquid Crystal Display. An LCD consists of a thin sandwich of two glass plates with
sealed edges, containing nematic liquid-crystal material that forms the screen image.
Versa displays are LCD type.
load
To copy a program into the computer's memory from a storage device.
M
megabyte
(MB) 1,048,576 bytes.
memory
Electronic storage area in a computer that retains information and programs. A
computer has two types of memory — read-only memory (ROM) and random access
memory (RAM).
menu
A video display of programs or options.
Glossary
5
Download from Www.Somanuals.com. All Manuals Search And Download.
microprocessor
A semiconductor central processing unit that is the principal component of a
microcomputer. Usually contained on a single chip that includes an arithmetic logic
unit, control logic, and control-memory unit.
MIDI
Musical Instrument Digital Interface. A standard serial bus, digital interface designed to
connect electronic musical devices. MIDI has no innate sound of its own.
MIR
Medium Infrared, an infrared technology that sends data at 1.152 Mbit/second
(1,152,000 bits per second).
mode
A method of operation; for example, the NEC Versa operates in either normal or
power-saving modes.
modem
MOdulator-DEModulator. A device that links computers over a telephone line.
MPEG
The MPEG (Moving Pictures Experts Group) standard is used to encode motion
images. The MPEG player program in Windows lets you play back MPEG files.
multimedia
Integrated forms of media such as sound, text, graphics, and video.
N
nonvolatile memory
Storage media that retains its data when system power is turned off. Nonvolatile
memory in the Versa is a complementary metal oxide semiconductor (CMOS) chip
which is backed up by an internal battery. The backup battery preserves the
clock/calendar data and system configuration parameters stored in CMOS. See volatile
memory.
O
operating system
Set of programs that manage the overall operation of the computer.
overwrite
Storing information at a location where information is already stored, thus destroying
the original information.
6
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
P
page
A type of message transmission in which a message is sent or received via modem to a
paging device from a computer (with paging communications software) or telephone.
parallel interface
Interface that communicates multiple data bits at a time.
parallel printer
A printer with a parallel interface.
parameter
A characteristic of a device or system.
partition
Process of dividing mass storage (hard disk drive) into isolated or separate sections.
Partitioning a hard drive creates additional logical drives, e.g., a 20-GB hard drive
partitioned into three logical drives creates drives C, D, and E. Partitioning facilitates
file management by allowing you to isolate the computer’s operating system to drive C
while storing applications and data files on separate drives D and E (also referred to as
partitions).
password
A string of characters that the user must enter before the system allows access or
system privileges.
PC Cards
A credit-card-sized peripheral interface standard for portable devices. Types of PC
Cards (also known as PCMCIA cards) currently offered by major vendors include
fax/modems, LAN, storage cards, and wireless communications devices.
peripheral
Input or output device not under direct computer control. A printer is a peripheral
device.
pixels
Picture elements. Tiny dots that make up a screen image.
port
Provides the means for an interface between the microprocessor and external devices.
A cable connector is usually plugged into the port to attach the device to the computer.
processor
In a computer, a functional unit that interprets and executes instructions.
Glossary
7
Download from Www.Somanuals.com. All Manuals Search And Download.
prompt
A special symbol indicating the beginning of an input line. Also a message that appears
on the screen indicating that the user must take a certain action.
Q
QWERTY
The QWERTY keyboard, designed in the 1800s for mechanical typewriters, refers to
the first six keys (QWERTY) on the top row of letters on the standard keyboard.
R
RAM
Random Access Memory. A storage device into which data is entered and from which
data is retrieved in a nonsequential manner.
read
To extract data from a storage device such as a diskette.
ROM
Read-Only Memory. Memory in which stored data cannot be modified by the user
except under special conditions.
reset
The process of returning a device to zero or to an initial or arbitrarily selected
condition.
resolution
The degree of screen image clarity. Video display resolution is determined by the
number of pixels on the screen. Resolution is usually specified in pixels by scan lines,
for example, 640 by 480. See pixels.
RS-232C
Standard interface for serial devices. This port is sometimes referred to as the serial
port.
S
scanner
An optical device that reads printed material and converts it to a computer screen
image.
serial interface
An interface that communicates information one bit at a time.
8
Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
serial printer
A printer with a serial interface.
SIR
Serial Infrared, an infrared technology that sends data at 2.4 Mbit/second (2,400,000
bits per second).
SO-DIMM
Small outline dual-inline Memory Module. A small circuit board that holds memory
chips. A dual in-line memory module (DIMM) has a 64-bit path.
software
Programs that run on a computer such as operating systems, word processors, and
spreadsheets.
SP/DIF
Sony and Philips Digital Interconnect Format. SP/DIF enables a computer system to
produce digital audio output through the use of an optical output cable to an optical
disk device.
Standby mode
A state of power management that puts the system to “sleep.” Standby mode shuts
down all devices in the system while retaining data and system status.
SVGA
Super Video Graphics Array. Graphics technology that supports up to 256 or more
colors and a graphics resolution of 800 x 600 pixels.
system board
The main printed circuit board inside the system unit into which other boards and major
chip components, such as the system microprocessor, are connected.
s-video
Short for super-video, a technology for transmitting video signals over a cable by
dividing the video information into two separate signals: one for color, and the other for
brightness. When sent to a television, s-video produces sharper images and superior
color definition.
T
TFT
Thin Film Transistor. A type of LCD color screen that supports up to 16.8 million
colors.
Glossary
9
Download from Www.Somanuals.com. All Manuals Search And Download.
U
USB
Universal Serial Bus. This external bus standard supports the connection of up to 127
peripheral devices, such as mice, modems, and keyboards. USB supports plug-and-play
installation on some systems.
V
VersaGlide
A small, touch-sensitive pad used as a pointing device on your NEC Versa notebook
computer. With the VersaGlide, you can move your finger along the pad to move the
cursor or simulate a mouse click by tapping the pad.
VGA
Video Graphics Array. Graphics technology that supports up to 256 colors and a
graphics resolution of 640 by 480 pixels.
volatile memory
Storage media that loses its data when system power is turned off. Standard memory
and memory that you add to the Versa are volatile memory. See nonvolatile memory.
W
warm boot
Process of resetting the computer without turning off the power through keyboard input
(pressing Ctrl, Alt, and Del keys simultaneously). The system returns to an initial or
arbitrarily selected condition.
warm swap
Process of swapping devices in and out of a computer system without turning off the
power. The system must be in a sleep state before removing or inserting a device.
waveform
A graphic representation of a sound wave as displayed on an oscilloscope, which
converts sound waves into electronic signals.
write
To record or store information to a storage device.
10 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
X
XGA
Extended Graphics Array. This high-resolution graphics standard supports 800 x 600 –
1024 x 768 pixels and up to 16 million simultaneous colors. XGA also supports non-
interlaced monitors.
Z
Zoomed Video
A direct high-speed connection between the video, audio, and graphics subsystems
within the computer that provides the high-quality path required for smooth video
playback or TV tuner transmission. Zoomed Video technology allows data transfer
directly between a PC Card and VGA controller allowing notebook computers to
connect via PC Card to real-time multimedia devices such as video cameras.
Glossary 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Beep codes, 10-6
BIOS
A
Advanced menu, 3-8
Boot menu, 3-11
Exit menu, 3-11
Main menu, 3-5
Security menu, 3-10
BIOS setup, 3-2
AC adapter, 7-3
connecting, 2-4
using, 2-3
AC Power port, 1-9
ACPI, 3-12
advanced power settings, 3-15
alarms, 3-14
hibernation, 2-6, 3-15
power meter, 3-14
power schemes, 3-13
Advanced
C
Cache memory, B-2
Caps lock, 1-5
CD care, 5-8
graphics Port, 1-3
Advanced Configuration and Power Interface,
3-12
CD-ROM drive, 5-3
cable, 5-5
connecting, 5-6
Advanced power settings, 3-15
Alarm, 3-14
disconnecting, 5-8
using, 5-3, 5-6
critical battery, 3-14
low battery, 3-14
Audio
AVI files, 9-2
MIDI files, 9-2
Charging the battery, 2-11
Cleaning your NEC Versa, 2-14
Closing LCD panel, 3-15
CMOS battery, 2-12
Connecting
WAV files, 9-2
AC adapter, 2-4
audio options, 8-3
external monitor, 8-2
USB devices, 8-4
Control keys, 1-7
Critical battery alarm, 3-14
Cursor control keys, 1-7
B
Battery
bay, 1-9
charging, 2-11
charging LED, 1-8
CMOS, 2-12
extending life, 2-8
handling, 2-8
inserting, 2-10
main, 2-12
optional, 2-12
precautions, 2-11
recharging precautions, 2-12
removing, 2-10
replacing, 2-9
using, 2-6
D
Determining battery status, 2-7
Digital video files, 9-4
Dip switch settings, 3-20
Diskette drive, 5-2
cable, 5-2
connecting, 5-3
disconnecting, 5-3
E
when to change, 2-8
Entering BIOS setup, 3-2
Index-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Extending battery life, 2-8
External devices
K
Keyboard, 1-5, 1-6
audio options, 8-3
CD-ROM drive, 5-3
floppy diskette drive, 5-2
microphone, 1-10
L
LCD panel
closing, 3-15
display, 1-5
speakers, 9-4
features, 1-4
Locating
memory module bay, 5-9
Low battery
power, 2-7
F
FAQs
booting the system, C-5
diskette drive, C-3
display panel, C-2
external mouse, C-2
miscellaneous, C-7
power management, C-5
Full restore, 4-6
Function keys, 1-6
Low battery alarm, 3-14
M
Main battery, 1-12, 2-12
returning to normal state, 2-8
Main power source
DC power, 7-3
Managing system power, 3-12
Memory
H
Hard disk
turning off, 3-13
Hard disk drive, 5-8
Headphones, 1-10, 9-4
Hibernate mode, 2-6, 3-15
Hibernation, 2-6, 3-15
expansion, 5-9
map, B-7
module bay, 1-12, 5-9
modules, 5-9
Menus
Advanced, 3-8
Boot, 3-11
Exit, 3-11
I
Increasing system memory, 5-9
Installing
Main, 3-5
SO-DIMMs, 5-9, 5-11
Internal
hard disk drive, 5-8
LAN, 6-5
LAN, connecting, 6-5
modem, 6-6
Security, 3-10
Microphone, 1-5, 9-3
MIDI files, 9-4
Mini-PCI LAN, 6-5
Mixing, 9-3
Monitor
modem, connecting, 6-6
speakers, 9-4
Internet
port, 1-9, 1-10
turning off, 3-13
Multimedia
Connection Wizard, 6-7
connections, 6-7
using Connection Wizard, 6-7
Interrupt controllers, B-8
IR port, 1-9
applications, 9-5
digital files, 9-4
microphone, 9-3
MIDI files, 9-4
mixing, 9-3
using, 6-8
playing back, 9-3
recording, 9-2
Index-2
Download from Www.Somanuals.com. All Manuals Search And Download.
using animation files, 9-5
using external speakers, 9-4
using headphones, 9-4
monitor, B-3
USB, B-3
POST error messages, 10-4
Power
using internal speakers, 9-4
button, 1-10, 1-11
meter, 3-14
schemes, 3-13
N
NEC
VersaGlide, 1-5
sources, 2-3
status LED, 1-8
Power button
NEC Computers
email/fax, 11-4
pressing, 3-15
FTP site, 11-3
Power connections, 7-3
Power management, 3-12
Power options
support services, 11-4
web site, 11-3
Num lock, 1-5
Windows 2000, 3-12
Power schemes, 3-13
Powering on, 2-6
Numeric keypad, 1-7
O
Power-on self test (POST), 3-2
Pressing Power button, 3-15
Problem checklist, 10-2
Product Recovery CD, 4-5
Full Disk restore, 4-6
guidelines, 4-5
Operating status LEDs, 1-5
Operating systems
Windows 2000, 4-2
Optional battery, 2-12
P
options, 4-5
Partition Only restore, 4-7
Password
Partition Only restore, 4-7
Product Recovery Utility, 4-5
Protecting your system, 2-12
Standby, 3-15
PC Card Slot, 1-11
PC cards, 6-2
communication cards, 6-2
inserting a card, 6-4
removing a card, 6-4
slots, 1-10, 6-3
R
Recharging the battery, 2-8
Recommended operating environment, B-6
Recording, 9-2
Release latch
battery, 1-12, 2-9
storage, 6-3
Type II, 6-2
Removing SO-DIMMs, 5-11
Replacing the battery pack, 2-9
Type II extended, 6-2
Peripheral Component Interconnect (PCI), 1-3
Peripheral devices, using
audio, 8-3
external monitor, 8-2
USB port, 8-4
S
Scroll lock, 1-5
Setting up a healthy work environment, A-2
Setup utility
legend bar, 3-4
Playing back, 9-3
Ports
using, 3-3
DC power, B-3
Show icon on taskbar, 3-15
SO-DIMMs
headphones, B-3
infrared, B-3
features, 5-10
microphone, B-3
Index-3
Download from Www.Somanuals.com. All Manuals Search And Download.
installing, 5-11
removing, 5-11
Speaker, 1-5
NEC VersaGlide, 2-2
V
Specifications
Vents, 1-12
VersaGlide
adjustments, 2-3
features, 2-2
tips, 2-3
battery pack, B-6
calendar clock, B-2
CD-ROM drive, B-5
diskette drive, B-4
hard disk drive, B-4
input/output facilities, B-3
keyboard, B-4
PC card slots, B-3
power, B-5
random access memory, B-2
read-only memory, B-2
speakers, B-3
W
Windows 2000, 4-2
introduction, 4-2
power options, 3-12
taskbar icons, 4-3
system processor, B-2
Standby password, 3-15
Start-up problems, 10-3
Storage requirements, 2-13
Switch settings, 3-20
System
care, 2-12
dimensions, B-6
feet, 1-12
precautions for use, 2-13
Standby, 3-14
weight, B-6
System features
back, 1-9
bottom, 1-12
front, 1-3, 1-8
left, 1-9
right, 1-10
T
Taskbar icon, 3-15
Technical support, 10-7
U
USB
port, 1-10, 1-11, 8-4
Using
AC adapter, 2-3
animation files, 9-5
main battery, 2-6
Index-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Statements
The following regulatory statements include the Federal Communications Commission
(FCC) Radio Frequency Interference Statement, compliance statements for Canada and
Europe, battery disposal and replacement information, and the Declaration of
Conformity.
FCC Statement for United States Only
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to operate the
equipment.
Note This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures.
!
!
!
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from the one to which the
receiver is connected.
!
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations (pursuant to ICES-003 Issue 2,
Revision 1).
Avis de conformité aux normes du ministere des communications du
Canada
Cet equipment ne depasse pas les limites de Classe B d'émission de bruits
radioelectriques pour les appareill numerique, lelles que prescribes per le Reglement
sur le brouillage radioélectrique elebil por le minisieredes Communications du Canada.
Regulatory Statements
1
Download from Www.Somanuals.com. All Manuals Search And Download.
European Community Directive Conformance Statement
This product is in conformity with the protection requirements of EC Council Directive
89/336/EEC on the approximation of laws of the Member States relating to electro-
magnetic compatibility. This product satisfied the Class B limits of EN 55022.
Battery Replacement
A lithium battery in some computers maintains system configuration information. In
the event that the battery fails to maintain system configuration information, NEC
Computers recommends that you replace the battery. For battery replacement
information, call your NEC Computers dealer or NEC Support Services.
There is a danger of explosion if the battery is incorrectly
replaced. Replace only with the same or equivalent type recommended by the
manufacturer. Discard used batteries according to the manufacturer’s instructions.
Il y a danger d’explosion s’il y a replacement
incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un
type recommandé par le constructeur. Mettre au rébut les batteries usagées
conformément aux instructions du fabricant.
Battery and LCD Panel Disposal
The primary battery is made of Lithium Polymer (Li-Poly), the secondary battery of
Lithium Ion (Li-Ion) and the CMOS clock battery is made of Lithium. The LCD panel
contains mercury.
Do not place used batteries or LCD panels in your regular trash. They must be
collected, recycled or disposed of in an environmentally approved manner. Contact
your local waste management officials for other information regarding the
environmentally sound collection, recycling, and disposal of the LCD panel, which
contains the primary battery, or other batteries.
Mini-PCI FCC Registration Numbers
If your system has a built-in mini-PCI modem, the FCC registration number of your
system is FJE USA-40066-ME-E REN 0.0A.
2
Regulatory Statements
Download from Www.Somanuals.com. All Manuals Search And Download.
NEC Computers Inc.
DECLARATION OF CONFORMITY
We, the Responsible Party
NEC Computers Inc.
15 Business Park Way
Sacramento, CA 95828
declare that the product
NEC Versa® DayLite™/UltraLite™
is in conformity with part 15 of the FCC
Rules. Operation of this product is subject
to the following two conditions: (1) this
device may not cause harmful interference,
and (2) this device must accept any
interference received, including
interference that may cause undesired
operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
|