User’s Manual
PlasmaSync 42XC10
PlasmaSync 50XC10
PlasmaSync 60XC10
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Important Safety Instructions..............................................................................................................English-1
Important Information ...........................................................................................................................English-2
Safety Precautions and Maintenance...................................................................................................English-3
Recommended Use....................................................................................................................................English-4
Installation
Optional Stands/Mounts..........................................................................................................English-6
Mounting Location....................................................................................................................English-6
Mounting on Ceiling..................................................................................................................English-7
Maintenance, Orientation, Cable Management ..................................................................English-7
Using the Remote......................................................................................................................English-8
Part Names and Functions
Control Panel..............................................................................................................................English-9
Terminal Panel............................................................................................................................English-10
Remote Control..........................................................................................................................English-11
Power, Display, Digital Zoom, Pointer, Main Power Switch Cover.....................................English-12
Remote Control ID.....................................................................................................................English-13
On-Screen Display(OSD)
Using the OSD.............................................................................................................................English-14
OSD................................................................................................................................................English-15
Operation
Picture Size Using Video Signals............................................................................................English-18
Picture Size Using Computer Signals....................................................................................English-19
Split Screen Mode .....................................................................................................................English-20
Picture-in-Picture Mode .........................................................................................................English-21
RS-232C .......................................................................................................................................................English-23
Troubleshooting.........................................................................................................................................English-27
Specifications
42XC10..........................................................................................................................................English-28
50XC10 .........................................................................................................................................English-29
60XC10 .........................................................................................................................................English-30
Supported Resolutions
42XC10..........................................................................................................................................English-31
50XC10 .........................................................................................................................................English-33
60XC10 .........................................................................................................................................English-35
Pin Assignment..........................................................................................................................................English-37
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
16. Damage Requiring Service -e appliance should be
Read Before Operating Equipment.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
serviced by qualified service personnel when:
A. e power supply cord or the plug has been damaged;
or
B. Objects have fallen, or liquid has been spilled into
the appliance;
or
C. e appliance has been exposed to rain;
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
or
7. Do not block any of the ventilation openings. Install in
D. e appliance does not appear to operate normally or
accordance with the manufacturer's instructions.
exhibits a marked change in performance;
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and third grounding prong e wide
blade or third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet.
or
E. e appliance has been dropped, or the enclosure
damaged.
17. Tilt/Stability - All monitors must comply with
recommended international global safety standards for
tilt and stability properties of its cabinet design.
Do not compromise these design standards by applying
excessive pull force to the front, or top, of the cabinet
which could ultimately overturn the product.
Also, do not endanger yourself, or children, by placing
electronic equipment/toys on the top of the cabinet.
Such items could unsuspectingly fall from the top of the
set and cause product damage and/or personal injury.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
18. Wall/Ceiling Mounting - e appliance should be
mounted to a wall/ceiling only as recommended by the
manufacturer.
manufacturer
12. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart or apparatus combination to avoid
injury from tip-over.
19. Power Lines - An outdoor antenna should be located
away from power lines.
20. Outdoor Antenna Grounding - If an outside antenna is
connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against
voltage surges and built up static charges.
Section 810 of the National Electric code. ANSI/NFPA
No.70-1984, provides information with respect to
proper grounding of the mats and supporting structure,
grounding of the lead-in wire to an antenna-discharge
unit, size of grounding connectors, location of antenna
discharge unit, connection to grounding electrodes and
requirements for the grounding electrode.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as when the power-supply
cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped
21. Objects and Liquid Entry - Care should be taken so that
objects do not fall and liquids are not spilled into the
enclosure through openings.
Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on apparatus
Additional Safety Information
WARNING
15. is product may contain lead. Disposal of these
materials may be regulated due to environmental
considerations.
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
For disposal or recycling information, please contact
your local authorities or the Electronic Industries
English-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Information
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE THIS
UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE PRONGS
CAN BE FULLY INSERTED.
REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED FROM WALL
SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD
FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
is symbol warns user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
erefore, it is dangerous to make any kind of contact with any part inside this unit.
is symbol alerts the user that important literature concerning the operation and maintenance of this unit has been
included. erefore, it should be read carefully in order to avoid any problems.
CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not
supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the AC
voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.
European
Continental
Plug Type
North America
U.K.
Chinese
Japanese
Plug Shape
Country
Voltage
U.S.A./Canada
120*
EU (except U.K.)
230
U.K.
230
China
220
Japan
100
*When operating the PlasmaSync monitor with its AC 125-240V power supply, use a power supply cord that matches the power
supply voltage of the AC power outlet being used.
measures:
Canadian Department of
•
•
Reorient or relocate the receiving antenna.
Increase the distance between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult your dealer or an experienced radio/TV technician for help.
Communications Compliance Statement
DOC: is Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
•
•
FCC Information
1. Use the attached specified cables with the P426Y3(P42XC10),
P506Y4(P50XC10) or P606Y5(P60XC10) color monitor so as not to
interfere with radio and television reception.
If necessary, the user should contact the dealer or an experienced radio/
television technician for additional suggestions. e user may find the
following booklet, prepared by the Federal Communications Commission,
helpful: “How to Identify and Resolve Radio-TV Interference Problems.” is
booklet is available from the U.S. Government Printing Office, Washington,
D.C., 20402, Stock No. 004-000-00345-4.
(1) Please use the supplied power cord or equivalent to
ensure FCC compliance.
(2) Please use shielded video signal cable,
15-pin mini D-SUB to 15-pin mini D-SUB
with ferrite cores on both ends (not included).
WARNING
is product equipped with a three-wire grounding (earthed) plug - a plug
that has a third (grounding) pin. is plug only fits a grounding-type power
outlet. If you are unable to insert the plug into an outlet, contact a licensed
electrician to replace the outlet with a properly grounded one. Do not defeat
the safety purpose of the grounding plug.
2. is equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. ese
limits are designed to provide reasonable protection against harmful
interference in a residential installation. is equipment generates, uses,
and can radiate radio frequency energy, and, if not installed and used
in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
English-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Precautions and Maintenance
• Unplug the power cord during electrical storms or when
the unit will not be in use for a long period.
• Do not use monitor in high temperature, humid, dusty,
or oily areas.
• Do not cover vent on monitor.
• Clean plasma ventilation areas using a vacuum cleaner
with a soſt brush nozzle attachment.
Safety Precautions
and Maintenance
FOR OPTIMUM PERFORMANCE, PLEASE NOTE
THE FOLLOWING WHEN SETTING UP AND
USING THE MONITOR:
e plasma display's panel is made up of fine picture
elements (cells), of which more than 99.99 percent are active
cells. Some cells may not produce light or remain constantly
lit. For safe operation and to avoid damaging the unit, read
carefully and observe the following instructions.
• To ensure proper ventilation, cleaning the ventilation
areas must be carried out monthly. More frequent
cleaning may be necessary depending on the
environment in which the plasma monitor is installed.
• Allow adequate ventilation around the monitor so that
heat can properly dissipate. Do not block ventilated
openings or place the monitor near a radiator or other
heat sources. Do not put anything on top of monitor.
• Handle with care when transporting. Save packaging for
transporting.
• As is the case with any phosphor-based display (like a
CRT monitor, for example) light output will gradually
decrease over the life of a Plasma Display Panel.
• To avoid sulfurization it is strongly recommended not to
place the unit in a dressing room in a public bath or hot
spring bath.
• DO NOT OPEN THE MONITOR. ere are no user-
serviceable parts inside and opening or removing covers
may expose you to dangerous shock hazards or other
risks. e manufacturer is not liable for any bodily harm
or damage caused if unqualified persons attempt service
or open the back cover. Refer all servicing to qualified
service personnel.
• Do not spill any liquids into the cabinet or use your
monitor near water.
• Do not insert objects of any kind into the cabinet slots,
as they may touch dangerous voltage points, which can
be harmful or fatal or may cause electric shock, fire or
equipment failure.
• Do not bend, crimp or otherwise damage the power cord.
Do not place any heavy objects on the power cord.
Damage to the cord may cause shock or fire.
• Do not place this product on a sloping or unstable cart,
stand or table, as the monitor may fall, causing serious
damage to the monitor.
CAUTION
Immediately unplug your monitor from the wall outlet and
refer servicing to qualified service personnel under the
following conditions:
• When the power supply cord or plug is damaged.
• If liquid has been spilled on, or objects have fallen into
the monitor.
• If the monitor has been exposed to rain or water.
• If the monitor has been dropped or the cabinet
damaged.
• Do not use in a moving vehicle, as the unit could drop or
topple over and cause injuries.
• e power cable connector is the primary means of
detaching the system from the power supply. e
monitor should be installed close to a power outlet that
is easily accessible.
• is equipment shall be connected to a MAIN outlet
with a protective earth-ground connection. Do not place
any objects onto the monitor and do not use the monitor
outdoors.
• If the monitor does not operate normally by following
operating instructions.
• Do not use this unit’s polarized plug with an extension
cord or with outlets unless the prongs can be inserted
fully.
• e power supply cord you use must have been approved
by and comply with the safety standards of your
country. (Type H05VV-F 3G 1mm2 should be used in
Europe)
• In UK, use a BS-approved power cord with molded plug
having a black (13A) fuse installed for use with this
monitor.
• Use only with 100 V to 240 V 50 Hz/60 Hz AC power
supply. Continued operation at line voltages greater than
100 V to 240 V AC will shorten the life of the unit, and
might even cause a fire hazard.
English-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Use
CAUTION
Cleaning the Panel
• When the panel becomes dusty or dirty, wipe gently
with soſt cloth.
• Do not rub the panel with coarse material.
• Do not apply pressure to the surface.
CORRECT PLACEMENT AND ADJUSTMENT OF
THE MONITOR CAN REDUCE EYE, SHOULDER AND
NECK FATIGUE. CHECK THE FOLLOWING WHEN
POSITIONING THE MONITOR:
• Do not use OA cleaner. OA cleaner will cause
deterioration or discolor the surface.
• For optimum performance, allow 20 minutes for warm-
up.
• Rest your eyes periodically by focusing on an object at
least 5 feet away. Blink oſten.
• Position the monitor at a 90 degree angle to windows
and other light sources to minimize glare and
reflections.
• Clean the monitor surface with a lint-free, nonabrasive
cloth. Avoid using any cleaning solution or glass
cleaner.
• Adjust the monitor’s brightness and contrast controls to
enhance readability.
Cleaning the Cabinet
• Unplug the power supply.
• Gently wipe the cabinet with a soſt cloth.
• To clean the cabinet, dampen the cloth with a neutral
detergent and water, wipe the cabinet and follow with a
dry cloth.
NOTE: e surface of the cabinet is composed of many
types of plastic.
• Get regular eye checkups.
DO NOT clean with benzene thinner, alkaline
detergent, alcoholic system detergent, glass cleaner,
wax, polish cleaner, soap powder, or insecticide.
Rubber or vinyl should not be in contact with
the cabinet for an extended period of time. ese
types of fluids and materials can cause the paint to
deteriorate, crack or peel.
Ergonomics
To realize the maximum ergonomic benefits, we recommend
the following:
• Use the preset Size and Position controls with standard
signals.
• Use the preset Color Setting.
CLEANING THE VENT HOLES
• Clean plasma ventilation areas using a vacuum cleaner
with a soſt brush nozzle attachment.
• Do not use primary color blue on a dark background, as
it is difficult to see and may produce eye fatigue due to
insufficient contrast.
• is equipment is not for use at video display work
station according to Bildscharb V.
• To ensure proper ventilation, cleaning the ventilation
areas must be carried out monthly. More frequent
cleaning may be necessary depending on the
For more detailed information on setting up a healthy work
environment, refer to the following document:
environment in which the plasma monitor is installed.
American National Standard for Human Factors
Engineering of Visual Display Terminal Workstations
ANSI-HFS Standard No. 100-1988
Published by:
e Human Factors and Ergonomics Society
P.O. Box 1369, Santa Monica, California 90406.
English-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Use
- continued
To avoid or minimize image
retention:
OPERATING ENVIRONMENT
Operating environment temperature and humidity: 0 °C to
+40 °C (+32 °F to +104 °F); less than 80%RH (cooling vents
not blocked) Do not install this unit in a poorly ventilated
area, or in locations exposed to high humidity or direct
sunlight (or strong artificial light)
Like all phosphor-based display devices and all other gas
plasma displays, plasma monitors can be susceptible to image
retention under certain circumstances. Certain operating
conditions, such as the continuous display of a static
image over a prolonged period of time, can result in image
retention if proper precautions are not taken. To protect
your investment in this plasma monitor, please adhere to the
following guidelines and recommendations for minimizing
the occurrence of image retention:
WARNING
Not for use in a computer room as defined in the Standard
for the Protection of Electronic Computer/Data Processing
Equipment ANSI/NFPA 75.
NOTE: Please use shielded video signal cable, 15-pin mini
D-SUB to 15-pin mini D-SUB with ferrite cores on
both ends (not included).
• Always enable and use your computer’s screen saver
function during use with a computer input source.
• Display a moving image whenever possible.
• Change the position of the menu display from time to
time.
• Always power down the monitor when you are finished
using it.
To reduce the likelihood of
image retention from long-term
use:
• Lower the Brightness and Contrast levels as much as
possible without impairing image readability.
• Display an image with many colors and color gradations
(i.e. photographic or photo-realistic images).
• Create image content with minimal contrast between
light and dark areas. Use complementary or pastel colors
whenever possible.
• Avoid displaying images with few colors and distinct,
sharply defined borders between colors.
Plasma monitor driving sound
• e panel of the Plasma monitor is composed of
extremely fine pixels and these pixels emit light
according to received video signals. is principle may
cause you to hear a buzz or electrical hum coming from
the Plasma monitor. Also note that the rotation speed
of the cooling fan motor increases when the ambient
temperature of the Plasma monitor becomes high. You
may hear the sound of the motor at that time.
NOTE: e following items are not covered by the
warranty.
• Image retention
• Panel generated sound. Examples: Fan motor
and electrical noises circuit humming /glass panel
buzzing.
English-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
• Allow adequate ventilation or provide air conditioning
around the monitor, so that heat can properly dissipate
away from the unit and mounting apparatus.
Using Optional Stand/Mounts
An optional stand or mounting apparatus can be installed
either while the unit is in the upright position or while the
unit is face-down.
Figure 1
To install the stand while in the upright position, lower the
monitor onto to the feet as shown (Figure 1). Use the handles
to support the display while lowering the support holes
underneath the display onto the feet.
If stand or mounting apparatus is to be installed while the
unit is face-down (Figure 2), be sure to lay the protective
sheet (the foam sheet that the unit was wrapped in)
underneath the unit on order to prevent damage to the
screen.
is unit must be used with a stand or some type of
mounting apparatus. is unit is not designed for use
without additional support.
• For correct Installation and Mounting it is
recommended to use a trained, authorized dealer.
• Failure to follow correct mounting procedures could
result in dame to the unit or to the installer.
Protective Sheet
• Product warranty does not cover damage caused by
improper installation.
Figure 2
CAUTION:
• To install, follow those instructions included with the
stand or mounting apparatus. Use only those devices
recommended by the manufacturer.
Table
• Make sure to install stand or mounting apparatus to the
unit while on a surface that is strong and stable enough
to support the weight of the unit, such as a floor or
sturdy table.
• Use the specified clasps for installation.
• Take necessary steps to prevent the unit from tipping or
falling.
Mounting Location
e ceiling and wall must be strong enough to support the
monitor and mounting accessories.
Figure 3
• DO NOT install in locations where a door or gate can hit
the unit.
50mm (2")
• DO NOT install in areas where the unit will be subjected
to strong vibrations and dust.
• DO NOT install near where the main power supply
enters the building.
• DO NOT install in where people can easily grab and
hang onto the unit or the mounting apparatus.
50mm (2")
• When mounting in an enclosure or in a recessed area, as
in a wall, leave at least 2 inches (50mm) of space between
the monitor and the wall for proper ventilation (Figure 3).
English-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
- continued
Mounting on Ceiling
Cable Management
To conveniently manage cables, use the cable clamps
provided to bundle the power cord together with the signal
and audio cables at the back of the display.
• Ensure that the ceiling is sturdy enough to support the
weight of the unit and the mounting apparatus over
time, against earthquakes, unexpected vibrations, and
other external forces.
To attach cable clamps:
• Be sure the unit is mounted to a solid structure within
the ceiling, such as a support beam. Secure the monitor
using bolts, spring lock washers, washer and nut.
• DO NOT mount to areas that have no supporting
internal structure. DO NOT use wood screws or anchor
screws for mounting. DO NOT mount the unit to trim
or to hanging fixtures.
1. Attach the cable clamps to the display. Insert the anchor
of the clamp into the hole on the back of the display.
ere are 4 cable clamps and 4 clamp holes on the unit.
2. Aſter the cable clamp is positioned on the display, wrap
the end around the cables. Place the end of the clamp
into the slot near the anchor. Pull until cables are snug.
Clamps are designed to stay in place. Once in position,
they will be difficult to remove.
Maintenance
3. Cables can be routed to the right or leſt of the clamp.
Use the beaded bands to secure the cables together along
their length. Make sure the cables are fully supported.
• Periodically check for loose screws, gaps, distortions,
or other problems that may occur with the mounting
apparatus. If a problem is detected, please refer to
qualified personnel for service.
To detach clamps:
• Regularly check the mounting location for signs of
damage or weakness that may occur over time.
Using pliers, twist the clamp 90 degrees and pull
outward. It is possible that the clamp can weaken over
time and removing it may cause damage to the clamp.
Please note the following when
mounting on wall or ceiling.
• When using mounting accessories other than those that
are NEC approved, they must comply with the VESA-
compatible (FDMlv1) mounting method.
Anchor
Slot
• NEC strongly recommends
using size M8 screws
Mounting
Bracket
Unit
Holes for Clamp
anchors
(16mm + thickness of
bracket in length). If using
screws longer than 16mm,
check the depth of the
hole.(Recommended Fasten
Force: 1125 - 1375N•cm)
NEC recommends mounting
interfaces that comply with
UL1678 standard in North
America.
Screw
16mm
Thickness
of Bracket
Screw length should equal
depth of hole (16mm) + the
thickness of mounting bracket.
Closed Clamp
Orientation
DO NOT use this monitor in the
portrait position. Doing so may cause
failure and void the warranty.
English-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Using the Remote:
- continued
Operating Range for the Remote Control
Point the top of the remote control toward the monitor’s
remote sensor while pressing buttons. e remote control
can be used from the front of the monitor at a maximum
distance of 7 m/23 ſt. from the front of the Plasma monitor’s
remote control sensor. e maximum horizontal and vertical
angle for use of the remote is 30 degree within a distance of
3.5 m/11.5 ſt.
Install the remote control batteries.
e remote control is powered by AA batteries. To install or
replace batteries:
CAUTION
e remote control may not function when direct sunlight
or strong illumination strikes the remote control sensor of
the Plasma monitor, or when there is an object in the path of
the sensor.
A. Press and slide to open the cover.
B. Align the batteries according to the (+)
and (–) indications inside the case.
C. Replace the cover.
Handling the Remote Control
Do not open the remote control other than to install
batteries. Do not allow water or other liquid to splash onto
the remote control. If the remote control gets wet, wipe it dry
immediately.
CAUTION: Incorrect usage of batteries can result in leaks or
bursting. NEC recommends the following battery use:
• Place “AA” size batteries matching the (+) and (-) signs
on each battery to the (+) and (-) signs of the battery
compartment.
Avoid exposure to heat and steam.
• Do not mix battery brands.
NOTE: If you do not intend to use the Remote Control for a
long period of time, remove the batteries.
• Do not combine new and old batteries, or mix brands.
is can shorten battery life or cause liquid leakage of
batteries.
• Remove dead batteries immediately to prevent battery
acid from leaking into the battery compartment.
• Do not touch exposed battery acid, it may injure skin.
• Do not drop or mishandle the remote.
• Do not get the remote control wet. If the remote does get
wet, wipe dry immediately.
• Avoid excessive heat and humidity.
• Do not dispose of batteries in fire.
30
30
• Please follow government regulations or public
environmental rules that apply in your country/area
when disposing of used batteries.
• When replacing, use only conventional non-
rechargeable alkaline or manganese batteries.
• ere is a risk of explosion if batteries are replaced
incorrectly.
English-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Control Panel
9
ON
OFF
10
8
1
7
2
3
6
5
4
1) POWER
8) EXIT
Switches the power on/standby.
Activates the OSD menu when the OSD menu is off.
Exits from the current menu being displayed to the
previous menu within the OSD.
2) MUTE
Switches the audio mute ON/OFF.
9) Remote control sensor and Power indicator
Receives the signal when using the wireless remote control.
Glows green when the monitor is active. Glows red when
the monitor is in Standby mode. Glows Amber when the
monitor is in POWER SAVE mode.
3) INPUT
Switches between input sources.
Acts as SET button within the OSD menu.
4) PLUS (+)
Increases the setting adjustment within OSD menu.
A red blinking Power indicator means that the monitor has
detected a failure. Contact qualified personnel in case of
failure.
5) MINUS (-)
Decreases the setting adjustment within OSD menu.
10) Main Power Switch
6) UP (
)
Seesaw switch to turn the main power on/off.
Increases the volume level when the OSD is off.
Moves area up to select which setting to is to be adjusted
within OSD menu.
Mode
Power On
Status indicator light
Green
7) DOWN (
)
Standby
Red
Decreases the volume level when the OSD is off.
Moves down to select which setting is to be adjusted within
OSD menu.
Power save
Amber
Diagnosis
Red blinking
(Detecting failure)
NOTE:
The POWER button does not completely turn off the
display. Use the Main Power Switch to completely turn off
the display.
English-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
Terminal Panel
9
1
12
DVD/HD2
OUT
R
R
R
IN
R
L
IN
(MONO)
L
(MONO)
(MONO)
L
L
S-VIDEO IN
VIDEO
Y
Cr/Pr Cb/Pb
DVD/HD1
SPEAKER (S)
EXTERNAL CNTROL
DVD/HD3
DVI
AUDIO3
VGA
AUDIO2
AUDIO1
AC IN
2
11
3
4
5
6
7
8
10
13
14
1) EXTERNAL CONTROL OUT (D-Sub 9 pin)
8) DVD/HD1
Connect RS-232C output to a second monitor.
Connect equipment such as a DVD player, HDTV device,
or set-top box.
2) EXTERNAL CONTROL (D-Sub 9 pin)
Connect RS-232C input to external equipment such as a
PC in order to control RS-232C functions.
9) DVD/HD2
Connect equipment such as a DVD player, HDTV device
or set-top.
3) DVD/HD3 (HDMI)
Input digital HDMI signals.
10) AUDIO1
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
4) DVI
Input digital RGB signals from a computer or HDTV
device having a digital RGB output.
11) S-VIDEO in
Input S-video.
5) AUDIO3
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
12) VIDEO1
Composite video input.
6) VGA (Mini D-Sub 15 pin)
13) EXTERNAL SPEAKER (L and R) connector
Connects to optional speakers. Output the audio signal
from AUDIO 1, 2, and 3 to external speakers.
NOTE: Speaker Terminal is for 8W + 8W (8 ohm).
Analog computer input.
7) AUDIO2
Input the audio signal from external equipment such as a
computer, VCR or DVD player.
14) AC IN
Connects with the supplied power cord.
Information:
For SCART connections there are 2 ways to connect:
SCART1: Connect R/G/B to the DVD/HD1 terminals and
composite sync. to the VIDEO1 terminal.
SCART2: Connect R/G/B + composite sync. to the VGA
terminal.
English-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
- continued
6) SIZE
Remote Control Functions
Set the aspect ratio of the image.
7) KEYPAD
Set REMOTE ID.
POWER ON
STANDBY
1
2
3
8) DISPLAY
PICTURE
MEMORY
RGB
DVD/HD
SIZE
VIDEO
22
Turn on/off the Information OSD.
4
PICTURE
MODE
5
9)
6
Move selection up or down
1
4
7
2
5
8
0
3
6
9
10) AUTO SETUP
Adjusts the CLOCK PHASE, CLOCK, and POSITION
settings automatically. (Analog RGB signal input only)
7
8
11) POINTER
Turn on/off the pointer.
DISPLAY
MENU
15
12) VOLUME
Increases/Decreases sound level.
16
17
9
SET
+
AUTO
SET UP
EXIT
13) SPLIT SCREEN
10
11
18
19
PIP: Picture-in-Picture mode.
VOL
ZOOM
POINTER
S BY S: Side-by-side mode.
+
+
SINGLE: Returns to normal mode.
SWAP: Swaps the Split Screen images.
SELECT/FREEZE: Selects which input is active when
in split screen mode.
MUTE
S BY S
12
20
21
SPLIT SCREEN
PIP
SINGLE
CAPTURE
SLEEP
13
SELECT/FREEZE
SWAP
When the PICTURE FREEZE function (see OSD
FUNCTION) is operating, SELECT/FREEZE can be
used to display still pictures on the sub screen.
REMOTE ID
SET
RESET
14
REMOTE CONTROLLER RU-M113
CAPTURE : Captures still picture.
14) REMOTE ID
Activates REMOTE ID function.
1) POWER ON/STANDBY
15) MENU
Turns ON/OFF menu mode.
Switches the power on/standby.
*If the Power Indicator on the display is not glowing,
then no controls will work.
16) SET
Makes selection.
2) VIDEO
Switches the input signal to the VIDEO source.
17) - , +
Increases or decreases amount of adjustment.
3) RGB
Switches the input signal to the RGB source.
18) EXIT
Goes to the previous menu.
4) DVD/HD
Switches the input signal to the DVD/HD source.
19) ZOOM
Enlarges or reduces the picture.
5) PICTURE MODE
Selects Picture Mode: [STANDARD], [BRIGHT],
[CINEMA1], [CINEMA2], [DEFAULT].
STANDARD: for viewing in a bright room
BRIGHT: brighter picture than STANDARD
CINEMA1, 2: for viewing in a dark room, good for
movies
20) MUTE
Mutes audio output.
21) SLEEP
Sleep timer.
22) PICTURE MEMORY
DEFAULT: factory default settings
Switches memory settings from 1 to 6.
English-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
POWER
- continued
Main Power Switch Cover
Included with the display is a cover for the Main Power
Switch. Use this cover to prevent the unit from being
inadvertently powered off.
To turn the unit ON and OFF:
1. Plug the power cord into an AC outlet.
Place the tab on the cable cover into the rectangular slot on
the display.
2. Press the Power button (on the unit).
e monitor's ON/STANDBY indicator turns red and
the unit will be in STANDBY mode.
en using the screw provided, secure the cover to the
display.
3. Press the POWER ON button on the remote control. e
ON/STANDBY indicator will turn green when the unit
is active.
4. Press the STANDBY button (on the remote) or the
Power button (on the unit) to turn off the monitor.
DISPLAY
To check display settings press the DISPLAY button on the
remote. e screen changes each time the DISPLAY button is
pressed. Display information will disappear aſter 3 seconds.
ON
OFF
DIGITAL ZOOM
SLOT
Digital zoom can change the picture position or enlarge the
image on the screen.
TAB
1. Be sure ZOOM NAV function is off. Press the ZOOM
button (+ or -) to display the magnifying glass.
Press the ZOOM + button to enlarge the image.
Press the ZOOM - button to reduce the image.
Press the UP and DOWN or PLUS and MINUS buttons
to reposition the picture.
Main Power
Switch
2. Press the POINTER button to hide the pointer.
Cover
POINTER
Use the Pointer to point to a specific area on the screen.
Press the UP and DOWN or PLUS and MINUS buttons to
reposition the Pointer.
English-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Part Names and Functions
- continued
Remote Control ID Function
REMOTE CONTROL ID
e remote control included with the display can be used
to control up to 26 individual monitors using what is
called the REMOTE CONTROL ID mode. e REMOTE
CONTROL ID mode works in conjunction with the Monitor
ID, allowing control of up to 26 individual monitors. For
example: if there are many monitors being used in the same
area, a remote control in normal mode would send signals to
every monitor at the same time Figure 1. Using the remote
in REMOTE CONTROL ID mode will only operate one
specific monitor within the group Figure 2.
Monitor ID:1
Monitor ID:2
Monitor ID:3
Remote works
Remote works
Remote works
TO SET REMOTE CONTROL ID:
Figure 1
Remote in Normal
mode or the REMOTE
ID is set to 0
While holding down the REMOTE ID SET button on the
remote control, use the KEYPAD to input the Monitor ID
(1-26) of the display to be controlled via remote. e remote
can then be used to operate the monitor having that specific
Monitor ID number.
When 0 is selected or when the remote control is in normal
mode, all monitors will be operated.
Monitor ID:3
Monitor ID:1
Monitor ID:2
TO USE REMOTE CONTROL ID MODE
ID Mode - To enter ID Mode press the REMOTE ID SET
button and hold down for 2 seconds.
Remote works
Remote does
not work
Remote does
not work
Normal Mode - To return to Normal Mode press the
REMOTE ID RESET button and hold down for 2 seconds.
In order for this feature to work properly, the display must be
assigned a Monitor ID number. e Monitor ID number can
be assigned under the SETUP menu in the OSD (See page
17).
Figure 2
Remote set up to
use Remote ID:3
If Monitor ID is set to “ALL” , monitor is controled by remote
control not depend on remote ID.
English-13
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display (OSD)
4. Change the setting or adjustment by pressing the + and
- buttons on the Control Panel or the Remote Control.
Using the OSD
Use the Remote Control or the control panel on the front
of the unit to enter the on-screen display menu to adjust
settings.
5. Press the EXIT button on the Remote Control, on the
Control Panel to return to the previous menu.
1. Press the MENU button on the remote or the EXIT
button on the Control Panel.
NOTE: Not all menu functions may be available. To access
all functions the Advanced OSD option must be
turned on in the ADVANCED OSD menu.
2. Use the up and down buttons to select the desired menu.
3. Press the SET button to select a sub-menu or item for
adjustment.
Press UP or DOWN
button to select
sub-menu.
Press SET.
Press UP, DOWN, PLUS,
or MINUS to select the
function or setting to be
adjusted.
Press MENU or EXIT.
Remote
Control
Press UP or DOWN
button to select.
Press INPUT
button to decide.
Press UP, DOWN, PLUS,
or MINUS to select.
Press EXIT.
Control
Panel
OSD Screen
VGA
VGA
FUNC.
FUNC.
FUNCTION
SCREEN
FUNCTION
SCREEN
SET UP
INFO
SET UP
INFO
PICTURE
PICTURE
OFF
OFF
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
PICTURE MEMORY
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
NR
COLOR TEMP.
FILM MODE
PICTURE MODE
TINT
NR
OFF
HIGH
ON
OFF
HIGH
ON
STANDARD
2.2
0%
COLOR TEMP.
FILM MODE
PICTURE MODE
GAMMA
SET UP LEVEL
COLOR CONTROL
STANDARD
4&-ꢀ
.&/6ꢁ4&-ꢀ
$-04&
4&-ꢀ
.&/6ꢁ4&-ꢀ
$-04&
ADVANCED OSD is OFF. Not all OSD functions will be
available when the ADVANCED OSD is off.
Advanced OSD is ON. All OSD functions are shown, but
some OSD functions may not be available.
English-14
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display (OSD)
Main Menu
PICTURE
Sub Menu
Sub Menu2
Explanation
Default
Reset
PICTURE MEMORY
Store picture menu settings and input terminal information. The
memory number is 1-6.
OFF
YES
The "PICTURE MEMORY" screen appears when the SET button is
pressed on the "PICTURE MEMORY" MENU.
CONTRAST
Adjusts the image brightness in relationship to the white level.
Press + or - to adjust.
50
50
YES
YES
BRIGHTNESS
Adjusts the image brightness in relationship to the background.
Press + or - to adjust.
SHARPNESS
COLOR
Adjusts the crispness of the image. Press + or - to adjust.
Adjusts the color depth of the screen. Press + or - to adjust.
Adjusts the tint of the screen. Press + or - to adjust.
50
50
YES
YES
YES
YES
YES
TINT
50
NR
Adjusts the amount of noise reduction. Press + or - to adjust.
OFF
MIDDLE
COLOR TEMP.
Adjusts the color temperature of the entire screen. A low
color temperature will make the screen reddish. A high color
temperature will make the screen bluish.
WHITE BALANCE.
GAIN RED
GAIN GREEN
GAIN BLUE
RESET
The "WHITE BALANCE" appears when the SET button is pressed
on the "COLOR TEMP." OSD menu.
GAIN RED/GREEN/BLUE: Adjusts the white level of the white
balance.
50
50
YES
YES
YES
YES
50
Resets the factory default settings. Select "ON", then press the
SET button to reset.
OFF
FILM MODE
Selects Film mode.
ON
YES
YES
PICTURE MODE
Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],
[CINEMA2], [DEFAULT].
STANDARD
STANDARD: For watching in a bright room.
CINEMA1, 2: For watching in a dark room, especially good for
movies.
BRIGHT: Brighter picture than STANDARD.
DEFAULT: Restores factory default settings.
GAMMA
Select a display gamma for best picture quality.
2.1, 2.2, 2.3, 2.4: The picture becomes darker as the number
increases.
S: Special gamma for certain types of movies. Raises the dark
parts and lowers the light parts of the image. (S-Curve)
These values are approximate.
2.2
0%
YES
YES
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled.
SET UP LEVEL
Available only when
the Advanced OSD
function in the
Adjusts the video black level.
VIDEO signal input only.
FUNCTION menu is
enabled.
COLOR CONTROL
Available only when
the Advanced OSD
function in the
FUNCTION menu is
enabled.
RED
Adjusts the levels of the Red, Green, Blue, Yellow, Magenta and
Cyan.
VIDEO and DVD/HD 1/2 input only.
50
50
50
YES
YES
YES
GREEN
BLUE
YELLOW
MAGENTA
CYAN
50
50
YES
YES
YES
YES
50
RESET
Resets the factory default settings. Select "ON", then press the
SET button to reset.
OFF
English-15
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display (OSD)
Main Menu
Sub Menu
Sub Menu2
Explanation
Default
Reset
YES
YES
YES
YES
YES
YES
YES
-
AUDIO
BASS
Adjusts the low frequency sound. Press + or - to adjust.
Adjusts the high frequency sound. Press + or - to adjust.
Adjusts the balance of L/R volume. Press + or - to adjust.
Select which audio input to use with the video source.
0
TREBLE
0
BALANCE
0
VIDEO1
DVD/HD1
VGA
AUDIO INPUT1
AUDIO INPUT2
AUDIO INPUT3
DVD/HD3 INPUT
ASPECT MODE
V-POSITION
HDMI
-
SCREEN
Selects aspect ratio of the displayed image. Press + or - to select.
Controls the vertical position of the image within the Display area
of the PDP.
0
YES
Press + to move up. Press - to move down.
H-POSITION
Controls the horizontal position of the image within the Display
area of the PDP.
0
YES
Press + to move right. Press - to move left.
V-HEIGHT
Adjusts the vertical size of the image.
Adjusts the horizontal size of the image.
0
0
YES
YES
NO
H-WIDTH
AUTO PICTURE
ON: H-Position, V-Position, Clock and Clock Phase are adjusted
OFF
automatically.
OFF: H-Position, V-Position, Clock and Clock Phase are adjusted
manually.
VGA input only.
CLOCK PHASE
CLOCK
Adjusts the visual “noise” on the image.
VGA input only.
0
0
YES
YES
Press + to expand the width of the image on the right of the
screen.
Press - to narrow the width of the image on the left.
VGA input only.
UNDER SCAN
ON: UNDERSCAN is selectable in the ASPECT MODE menu.
OFF: UNDERSCAN item is not selectable in the ASPECT MODE
menu.
OFF
YES
Available only when
the Advanced OSD
function in the
Video signal input only.
FUNCTION menu is
enabled.
SET UP
LANGUAGE
Select the language used by the OSD.
ENGLISH
NO
Some functions
available only
when the
Advanced OSD
function in the
FUNCTION
menu is
DVD/HD1 INPUT
Selects whether to set the input of the DVD/HD1 connector.
COMPONENT : for Component input. (3BNC connectors)
SCART1 : for SCART input (3RCA connectors and VIDEO1 input)
(SCART1 available for Europe and World-Wide models only)
COMPONENT
YES
D-SUB INPUT
Selects whether to set the input of the mini D-SUB connector.
RGB : for RGB input
SCART2 : for SCART input
RGB
YES
enabled.
(SCART2 available for Europe and World-Wide models only)
The
HD SELECT
Selects signal detection for similar 1080I signal manually.
1080I : Standard digital broadcasts
540P : Special digital broadcasts ( ex. DTC100 )
1080I
AUTO
NO
LANGUAGE
and ALL
RESET
functions
are always
available.
RGB SELECT
If there is a problem with signal detection, this function forces the
monitor to display the signal at the desired resolution.
If no problem is detected, the only available option will be “AUTO”.
VGA input only.
YES
HDMI MODE
DVI MODE
Choose the HDMI mode based on the input device connected via
HDMI connector.
When a DVD player or similar equipment is connected, sets to
"HIGH".
HIGH
NO
When a PC or similar equipment is connected, sets to "LOW".
PLUG/PLAY
Choose the DVI mode based on the input device connected via
DVI connector and set the black level.
When a PC or similar equipment is connected, PLUG/PLAY is
"DVI-PC" and BLACK LEVEL is "LOW".
When a DVD player or similar equipment is connected, PLUG/
PLAY is "DVI-HD" and BLACK LEVEL is "HIGH".
DVI-PC
LOW
NO
NO
NO
BLACK LEVEL
COLOR SYSTEM
The selected Color System depends on the video format of the
AUTO
input signal.
VIDEO input only.
English-16
Download from Www.Somanuals.com. All Manuals Search And Download.
On-Screen Display (OSD)
Main Menu
Sub Menu
Sub Menu2
Explanation
Default
Reset
SET UP
(continued)
BACK GROUND
Chooses the brightness of background when there is no input
signal present.
GRAY
YES
SIDE MASK
OSD
Adjusts the color of the side mask when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
3
YES
DISPLAY OSD ON: Information about inputs, screen size, etc. is shown.
OFF: No information is shown.
ON
TOP LEFT
ON
YES
YES
YES
OSD
POSITION
Change the position of the menu between TOP LEFT and BTM
RIGHT. Press + or - to adjust.
OSD ORBITER ON: The menu position intermittently shifts eight dots while the
OSD is being displayed.
OFF: The menu position does not shift.
OSD TRANSP. Adjusts the transparency level of the OSD.
Press + or - to adjust.
70%
YES
MONITOR ID
ALL RESET
Sets the monitor ID number from 1-26 or to "ALL".
Resets settings back to factory default values.
ALL
OFF
OFF
YES
-
FUNCTION
Some functions
available only
when the
Advanced OSD
function in the
FUNCTION
menu is
ADVANCED OSD
ON: All menu items are shown for advanced users.
YES
OFF: Some of the advanced menu items are not shown.
POWER SAVE
Sets how long the monitor waits to go into power save mode after
a signal is lost.
VGA and DVI input and Separate HV sync. only.
OFF
YES
INPUT SKIP
Skips to next input if present input is no signal.
This function is valid only for INPUT key on the display.
OFF
YES
YES
enabled.
SUB PICTURE
SUB
P.DETECT
This function automatically detects no input signal of sub screen.
This feature is available only picture-in-picture mode.
SUB P. DETECT: Sets availability of automatic detecting of sub
screen.
DISPLAY: Sets the appearance method of the sub screen.
SUB P. RATE: Sets the transparency of the sub screen.
AUTO
The
ADVANCED
OSD function
is always
available.
DISPLAY
NORMAL
100%
YES
YES
SUB P.RATE
ZOOM NAV
Sets the position of the zoom navigation image.
Sets the position of the captured still picture.
BTM LFT
S BY S1
MANUAL
YES
YES
YES
PICTURE FREEZE
SCREEN SAVER
Use the SCREEN SAVER function to reduce the risk of Image
Persistence.
PEAK BRIGHT : The brightness is decreased depending on
setting.
ORBITER : The screen image moves slightly with squeezing or
expanding.
INVERSE : The screen image is displayed alternately between
positive image and negative image, or the screen image is
displayed full white.
PEAK BRIGHT
ORBITER
100%
AUTO1
OFF
YES
YES
YES
INVERSE/
WHITE
CLOSED CAPTION
(U.S. models only)
Chooses the closed caption setting.
OFF
YES
CAPTION CONT
(U.S. models only)
Chooses the brightness of the closed caption.
NORMAL
LAST
YES
YES
YES
INPUT DETECT
INPUT
Sets the input mode and the sound volume when the power turn
on.
LAST : last mode (the input that was last selected when the power
turn off.)
VOLUME
LAST
MULTI to DVI : fixed input mode.
AUTO : Searches the input with the signal automatically
PRIORITY : Sets the priority input for AUTO setting.
PROTOCOL SET
Sets protocol setting of RS-232C.
OFF
YES
OFF : When NEC protocol is used (normal).
ON : When special protocol is used.
* Consult your dealer for details of protocol.
RS232C CONTROL
Selects the mode of the monitor when using the RS-232C daisy
chain.
NORMAL
-
YES
-
SIGNAL INFORMATION
Display signal information such as frequencies, polarities, etc.
English-17
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
2.35:1
Picture Size Using Video Signals
Image is expanded at a 2.35:1 ratio to fill the entire screen.
e screen is filled vertically; however, some information
will be lost on the leſt and right sides of the image.
Select one of seven picture sizes manually.
While viewing videos or digital video discs, perform the
following actions:
Available for the following inputs:
Video, Component, or RGB input (480I, 480P, 576I, 576P,
720P, 1080I, 1080P)
1. Press the SIZE button on the remote control.
2. To switch the screen sizes, press the SIZE button again
within 3 seconds. e available sizes are NORMAL, FULL,
DYNAMIC, ZOOM, 2.35:1, 14:9, and UNDERSCAN.
If a 720p, 1080i, or 1080p signal is displayed, the available
sizes are FULL, 2.35:1, DYNAMIC, and UNDERSCAN.
To avoid image retention, use the 2.35:1 image size if black
bars are displayed at the top and bottom of the screen
showing the displayed image.
If displaying an enhanced split-screen, the available sizes are
NORMAL and FULL.
NORMAL (4:3)
Images with a 4:3 (Normal) aspect ratio are displayed.
14:9
Image is displayed at a 14:9 aspect ratio.
Available for the following inputs:
Video, Component, or RGB input (480I, 480P, 576I, 576P)
FULL
Horizontally expands anamorphic signals to display the
correct linearity.
Normal (4:3) images are horizontally expanded to fill the
entire screen.
UNDERSCAN
Standard televisions crop (Underscan) images. Utilize the
UNDERSCAN function in the SCREEN menu to display the
entire image.
DYNAMIC
Vertically and horizontally expands the picture but at
different aspect ratios.
NOTE: Depending on the type of component used, black
borders or signal noise may appear near the screen
edges while in UNDERSCAN mode.
Over a period of time, image ghosting, shadowing,
or burn-in may result from continuous display of
underscanned images. While in UNDERSCAN
mode, the brightness may change if a Macrovision
signal is input.
ZOOM
Vertically and horizontally expands the picture while
maintaining the correct aspect ratio.
NOTE: Do not display 4:3 content in NORMAL mode for
extended periods of time to avoid image ghosting,
shadowing, or burn-in.
English-18
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
- continued
Information:
Picture Size Using Computer
Signals
Supported resolutions: For further information on the
display output of the various VESA signal standards
supported by the unit, see pages 31 - 36.
To expand a 4:3 image to fill the entire screen, switch to the
widescreen mode.
When 1360 dot x 768 line wide XGA signals with a vertical
frequency of 60 Hz and a horizontal frequency of 47.7 kHz
are input:
While viewing videos or digital video discs, perform the
following actions:
1. Press the SIZE button on the remote control.
1. Select an appropriate setting for the RGB SELECT mode.
2. To switch the screen sizes, press the SIZE button again
within 3 seconds. e available sizes are NORMAL, FULL,
and ZOOM.
2. Refer to the Resolutions Supported section of Model
Information on pages 31 - 36.
If an enhanced split-screen is displayed, the available sizes
are NORMAL and FULL.
NOTE: Do not display 4:3 content in NORMAL mode
for extended periods of time to avoid image
shadowing, ghosting, or burn-in.
NORMAL (4:3 or SXGA 5:4)
Images are displayed normally.
FULL
Horizontally expands anamorphic signals to display the
correct linearity.
Normal (4:3) images are horizontally expanded to fill the
entire screen.
ZOOM
Vertically and horizontally expands the picture, while
maintaining the correct aspect ratio.
English-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
- continued
Press the SWAP button to swap pictures.
Split Screen Mode
To display multiple pictures on the screen, perform the
following actions:
VGA
A
B
1. Press the desired SPLIT SCREEN function button on the
remote (PIP, S BY S, SINGLE).
SWAP
Only certain RGB signals are supported.
VGA
B
A
A
PIP
button
SINGLE
button
S BY S
button
SINGLE
button
PIP
Press the SELECT/FREEZE button to change the active
picture.
VGA
button
VGA
A
B
A
VGA
B
VIDEO1 is active.
S BY S
button
A
B
Split Screen mode works according to the table below.
SELECT/FREEZE
Side by Side Mode
VIDEO1
Press the -, +, p or q buttons to change the picture size.
VGA
VGA is active.
A
B
+
+
button
button
VGA
VGA
VGA
B
A
A
B
B
A
-
-
Side by Side2-R
Side by Side1
Side by Side2-L
button
button
q
p
q
p
q
p
button
button
button
button
button
button
+
+
button
button
VGA
VGA
VGA
A
B
A
B
B
A
-
-
button
button
Side by Side4-R
Side by Side3
Side by Side4-L
PIP normal operation test
PIP
available
Sub source
VIDEO1
- -
S-VIDEO
YES
DVD/HD1
YES
DVD/HD2
YES
DVD/HD3
YES
SCART1
SCART2
VGA
YES
YES
DVI
YES
YES
VIDEO1
- -
- -
- -
- -
S-VIDEO
YES
- -
YES
YES
YES
DVD/HD1
DVD/HD2
DVD/HD3
SCART1
YES
YES
YES
- -
YES
YES
YES
- -
- -
YES
YES
- -
YES
- -
YES
YES
- -
- -
- -
- -
- -
YES
YES
YES
- -
YES
YES
- -
Main
YES
- -
YES
- -
YES
- -
source
YES
YES
SCART2
VGA
- -
- -
- -
- -
YES
YES
- -
- -
- -
- -
- -
- -
YES
YES
YES
YES
YES
YES
DVI
YES
YES
YES
YES
- -
YES
YES
YES
- -
English-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
- continued
Picture-in-Picture Mode
Displaying Input Signal
Press the + and - buttons to change the position of the sub-
1. To make the desired picture active, press the SELECT/
FREEZE button.
picture.
+
VGA
VGA
button
2. To change the active signal, press the VIDEO, DVD/HD,
or RGB button.
B
B
A
A
e input selection may also be changed by pressing the
INPUT button on the front of the unit.
-
button
-
+
+
-
button
button
button
button
-
VGA
VGA
Adjusting the OSD controls
button
1. To make the desired picture active, press the SELECT/
FREEZE button.
A
A
B
B
+
button
2. To display the main menu, press the MENU button.
3. Adjust the settings as desired.
Press the p and q buttons to change the size of the sub-
picture.
VGA
NOTE: Some OSD functions may not be available in Split-
button
A
Screen mode.
B
VGA
button
A
button
B
VGA
button
A
button
B
VGA
A
button
B
Press the SELECT/FREEZE button to change the active
picture.
VGA
VIDEO1
VGA
A
A
B
B
English-21
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
- continued
Picture Settings Menu
Storing picture settings
is function stores the current input signal and PICTURE
menu settings in memory in order to recall these settings if
necessary. Up to six different settings can be stored.
Notes of up to 15 characters long can also be stored along
with each setting.
Example: Storing picture settings at MEMORY1
On the “PICTURE MEMORY” function under the
“PICTURE” menu, select “MEMORY1” and press the SET
button. e “PICTURE MEMORY” screen appears.
PICTURE MEMORY
OFF: Picture memory not used.
MEMORY1 TO 6: Choose the desired memory slot to set.
ere are 6 to choose from, independent of inputs.
SETTING THE MEMORY
Use the p and q buttons to select the desired memory slot,
from MEMORY1 to MEMORY6.
Use the t and u buttons to select “SET”, then press the SET
button.
If necessary, input a note.
RESETTING THE MEMORY
Use the p and q buttons to select the desired memory slot,
from MEMORY1 to MEMORY6, then use the t and u
buttons to select “RESET”, and press the SET button.
e memory is cleared, and “—” is displayed in the “INPUT”,
“SIGNAL” and “NOTE” columns.
INPUTTING NOTES
Use the t and u buttons to select “NOTE”, then press the
SET button.
Use the p and q button to select the character.
Use the t and u buttons to move the cursor.
Use the SET button to delete the character at the cursor
position.
When you have finished inputting the note, press the EXIT
button.
English-22
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
Functions that can be controlled via RS-232C:
is Plasma monitor can be controlled via personal
computer using an RS-232C connection.
• Powering ON or OFF
• Switching input signals
MONITOR ID and RS-232C CONTROL
Up to 26 individual monitors can be controlled through a
daisy chain via RS-232C connection.
NOTE: If your PC (IBM or IBM compatible) is equipped
only with a 25-pin serial port connector, a 25-pin
serial port adapter is required. Contact your dealer
for details.
1. Connect PC to the monitor.
NOTE: In order to function, the RS-232C OUT terminal
can only be connected to another monitor of the
same model. Do not connect to other types of
equipment.
Connect a PC’s RS-232C control output to the monitor's
RS-232C input. You can then connect the
RS-232C output from this monitor to another monitor’s
RS-232C input. Up to 26 monitors can be connected
using RS-232C.
2. Set Monitor ID and RS-232C Control mode.
For proper operation, the Monitor ID should be
set in the OSD menu of each monitor that is in the
chain. e Monitor ID can be set under the “SETUP”
menu in the OSD. e Monitor ID number can be set
within a range from 1 to 26 or set to "ALL". No two
monitors should share the same Monitor ID number.
It is recommended to number each monitor in a daisy
chain sequentially from 1. e first monitor in the daisy
chain is designated as the primary monitor. Subsequent
monitors with the chain are secondary monitors.
In the “FUNCTION” menu on the first monitor in the
RS-232C daisy chain set the "RS232C CONTROL"
to "NORMAL". Set the "RS232C CONTROL" to
“SECONDARY” on all other monitors.
is monitor uses RXD, TXD and GND
lines for RS-232C control.
e reverse type cable (null modem cable)
should be used for RS-232C control.
OUT
OUT
IN
IN
RS-232C (IN)
RS-232C (IN)
RS-232C (OUT)
RS-232C (OUT)
PC
(Out)
RS-232C Cable
RS-232C Cable
English-23
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
- continued
e following control sequence is used for a single monitor
When using the following control commands, all of the daisy-chained monitors
can be controlled at the same time from the primary monitor. However, reply and
status commands will only pertain to the primary monitor, and not to the secondary
monitors.
1) Interface
PROTOCOL
BAUD RATE
DATA LENGTH
PARITY BIT
STOP BIT
RS-232C
9600 [bps]
8 [bits]
NONE
1 [bit]
FLOW CONTROL NONE
2) Control command diagram
e command is structured by the address code, function code, data code and end
code. e length of the command is different for each function.
Address Code
30h 30h
Function Code
Function
Data Code
Data
End Code
0Dh
HEX
ASCII
'0' '0'
Function
Data
[Address code] 30h 30h (In ASCII code, '0' '0') fixed.
[Function code] A code of each fixed control move.
[Data code]
A code of each fixed control data (number) and
not always indicated.
[End code]
0Dh (In ASCII code, ' ' ) fixed.
To control multiple monitors that are daisy-
chained together please use the extended control
command.
English-24
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
- continued
3) Control sequence
1) e command from a computer to the Plasma monitor will take 400ms.
2) e Plasma monitor will send a return command 400ms* aſter it has received
an encode. If the command is not received correctly,
the Plasma monitor will not send the return command.
3) e personal computer checks the command and confirms if the
command which has been sent has been executed or not.
4) is Plasma monitor sends various codes other than the return code. When
sending a control sequence via RS-232C, other codes from personal
computers will be ignored.
*e sending time of the return command may be delayed depending on the
monitor’s current activity (changing of the input signal, etc.).
[Example] Turn the power ON. (' ' is for ASCII code)
Sending commands Status code from
Meaning
from the PC etc.
Plasma monitor
30 30 21 0D
'0' '0' '!' ' '
Command for
POWER ON
30 30 21 0D
'0' '0' '!' ' '
Command received
(Command echo back)
4) Operation commands
Operation commands execute the basic operation setting of this Plasma
monitor. It may not operate when changing the signal:
Operation
POWER ON
ASCII
!
HEX
21h
POWER OFF
"
22h
INPUT VIDEO1
INPUT S-VIDEO
INPUT DVD/HD1
INPUT DVD/HD2
INPUT DVD/HD3
INPUT SCART2
INPUT VGA
_v1
_v3
_v2
_v5
_h1
_v6
_r2
_r1
5Fh 76h 31h
5Fh 76h 33h
5Fh 76h 32h
5Fh 76h 35h
5Fh 68h 31h
5Fh 76h 36h
5Fh 72h 32h
5Fh 72h 31h
INPUT DVI
• POWER OFF command should not be used less than 1 minute aſter the power is
turned on.
• POWER ON command should not be used less than 1 minute aſter the power is
turned off.
English-25
Download from Www.Somanuals.com. All Manuals Search And Download.
RS-232C
- continued
5) Read command
Host computer sends the command without Data-code to monitor.
Aſter receiving this command, the monitor returns the command with Data-code
of current status to host computer.
<ex> When the Host computer checks the Power status of monitor, the status of
monitor is powered-on.
Command from
computer
Command from
Monitor
Detail of command
30 30 76 50 0D
‘0’’0’’v’’P’[enter]
Ask about the power
status of monitor.
30 30 76 50 31 0D
‘0’’0’’v’'P'’1’[enter]
Monitor is powered-on.
Structure of the Read-command
ASCII
HEX
Function Data Function Data
POWER ON
vP
vP
vI
1
76h 50h 31h
POWER OFF
0
76h 50h 30h
INPUT VIDEO1
v1
v3
v2
v5
h1
v6
r2
76h 49h 76h 31h
76h 49h 76h 33h
76h 49h 76h 32h
76h 49h 76h 35h
76h 49h 68h 31h
76h 49h 76h 36h
76h 49h 72h 32h
76h 49h 72h 31h
76h 4Dh 70h 31h
76h 4Dh 70h 32h
76h 4Dh 70h 33h
76h 4Dh 70h 34h
76h 4Dh 70h 35h
INPUT S-VIDEO
vI
INPUT DVD/HD1
INPUT DVD/HD2
INPUT DVD/HD3
INPUT SCART2
vI
vI
vI
vI
INPUT VGA
vI
INPUT DVI
vI
r1
Picture Mode BRIGHT
Picture Mode STANDARD
Picture Mode CINEMA1
Picture Mode CINEMA2
Picture Mode DEFAULT
vM
vM
vM
vM
vM
p1
p2
p3
p4
p5
English-26
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
No picture
Display image is not sized properly
• e signal cable should be properly connected to the display
card/computer.
• Use the OSD screen controls to increase or decrease the clock
total.
• e display card should be properly seated in its slot.
• Front Power Switch and computer power switch should be in
the ON position.
• Check to make sure that a supported mode has been selected
on the display card or system being used. (Please consult
display card or system manual to change graphics mode.)
• Check to make sure that a supported mode has been selected
on the display card or system being used. (Please consult
display card or system manual to change graphics mode.)
• Check the monitor and your display card with respect to
compatibility and recommended settings.
Selected resolution is not displayed properly
• Use OSD information to enter Information menu and confirm
that the appropriate resolution has been selected. If not, select
appropriate resolution.
•
Check the signal cable connector for bent or pushed-in pins.
No Sound
• Check to see if speaker cable is properly connected.
• Check to see if mute is activated.
• Check to see if volume is set at minimum.
NOTE: It is possible to play audio from a source that is different
from the video source.
Power Button does not respond
• Unplug the power cord of the monitor from the AC outlet to
turn off and reset the monitor.
Image persistence
• Please be aware that Plasma Technology may experience a
phenomena known as Image Persistence. Image Persistence
occurs when a residual or “ghost” image of a previous image
remains visible on the screen. Unlike CRT monitors, Plasma
monitors’ image persistence is not permanent, but constant
images being displayed for a long period of time should be
avoided. To alleviate image persistence, turn off the monitor
for as long as the previous image was displayed. For example,
if an image was on the monitor for one hour and a residual
image remains, the monitor should be turned off for one hour
to erase the image.
RS-232C does not work
•
Check the PROTOCOL SET in the FUNCTION menu.
Remote Control does not work
• Make sure the batteries are inserted properly.
• Test the batteries for strength/life.
• Make sure to point the remote directly at the sensor on the
monitor.
• Check if the remote is in Remote ID mode.
• e remote control may not function when in direct sunlight
or when there is strong illumination on the remote sensor of
the monitor.
NOTE: As with all personal display devices, NEC DISPLAY
SOLUTIONS recommends displaying moving images and
using a moving screen saver at regular intervals whenever the
screen is idle or turning off the monitor when not in use.
Image is unstable, unfocused or
swimming is apparent
• Signal cable should be properly attached to the Plasma
monitor, computer, or other input device.
• Use the OSD screen controls to focus and adjust display by
increasing or decreasing the clock phase total. When the
display mode is changed, the OSD Image Adjust settings may
need to be readjusted.
• Check the monitor and your display card with respect to
compatibility and recommended signal timings.
Image of component signal is greenish
• Check to see if the DVD/HD input connector is selected.
LED on monitor is not lit
(no green or red color can be seen)
• Main Power Switch should be in the ON position and power
cord should be connected.
Red LED on monitor is blinking
• A certain failure might have occurred, please contact your
nearest authorized NEC DISPLAY SOLUTIONS service
facility.
English-27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications 42XC10
PDP Module
Diagonal: 42 "/1058 mm
Pixel Pitch
Resolution
Horizontal
0.900 mm (W)/0.676 mm (H)
1024 x 768
Frequency
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz
24Hz to 120.4Hz
Vertical
Panel Display Size
Input Signals
922 mm (W) x 519 mm (H)
36.3 in (W) x 20.4 in (H)
DVI
DVI-D 24pin
Digital RGB
Analog RGB
Sync
DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*
0.7V p-p, Input Impedance 75 ohm
VGA
15pin Mini D-sub
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*
Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm
DVD/HD1,2
RCA (Y, Cb/Pb, Cr/Pr)
HDMI Type-A
Component
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
DVD/HD3
(HDMI)
Digital
Component
HDMI
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,
480i@60Hz
VIDEO1
S-VIDEO
RCA
Composite
S-VIDEO
1.0V p-p Input Impedance 75 ohm
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
mini DIN 4 pin
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),
0.3Vp-p/75ohm(PAL/SECAM)
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
Stereo L/R 0.5Vrms
Audio
AUDIO Input
RCA (L/R) X3
HDMI Type-A
Analog Audio
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)
Speaker Output
External Control
External Speaker Jack 8W + 8W (8 ohm)
RS-232C: IN
9 Pin D-sub
RS-232C: OUT
9 Pin D-sub (daisy chain)
Power Supply
4.4-1.8A@100-240V AC, 50/60Hz
Operational Environment
Temperature
Humidity
Temperature
Humidity
Net
0˚ to 40˚C / 32˚ F to 104˚ F
20% to 80% (without condensation)
Storage Environment
Dimensions (WxHxD)
-10˚C to 50˚C / 14˚ F to 122˚ F
10 - 90% (without condensation) / 90% - 2% x (Temp - 40°C) regarding over 40°C
1036mm(W) x 649mm(H) x 130mm(D) / 40.8"(W) x 25.6"(H) x 5.1"(D)
1220mm(W) x 900mm(H) x 360mm(D) / 48.0"(W) x 35.4"(H) x 14.2"(D)
34.5 kg / 76.1 lbs
Gross
Weight
(without speaker and stand )
Net
Gross
42.5 kg / 93.7 lbs
VESA compatible arm
mounting interface
700mm x 300mm
4 Holes (screw M8 Depth 16mm)
Complied Regulatory
and Guidelines
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick
Power Management
Plug & Play
VESA DPM (Separate HV Sync. only)
VESA DDC2B
Accessories
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps
*Compressed Image
English-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications 50XC10
PDP Module
Frequency
Diagonal: 50"/1269 mm
Pixel Pitch
Resolution
Horizontal
0.81 mm (W)/0.81 mm (H)
1365 x 768
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz
24Hz to 120.4Hz
Vertical
Panel Display Size
Input Signals
1106 mm (W) x 622 mm (H)
43.5 in (W) x 24.5 in (H)
DVI
DVI-D 24pin
Digital RGB
Analog RGB
Sync
DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*
0.7V p-p, Input Impedance 75 ohm
VGA
15pin Mini D-sub
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*
Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm
DVD/HD1,2
RCA (Y, Cb/Pb, Cr/Pr)
HDMI Type-A
Component
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
DVD/HD3
(HDMI)
Digital
Component
HDMI
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,
480i@60Hz
VIDEO1
S-VIDEO
RCA
Composite
S-VIDEO
1.0V p-p Input Impedance 75 ohm
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
mini DIN 4 pin
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),
0.3Vp-p/75ohm(PAL/SECAM)
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
Stereo L/R 0.5Vrms
Audio
AUDIO Input
RCA (L/R) X3
HDMI Type-A
Analog Audio
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)
Speaker Output
External Control
External Speaker Jack 8W + 8W (8 ohm)
RS-232C: IN
9 Pin D-sub
RS-232C: OUT
9 Pin D-sub (daisy chain)
Power Supply
6.0-2.6A@100-240V AC, 50/60Hz
Operational Environment
Temperature
Humidity
Temperature
Humidity
Net
0˚ to 40˚C / 32˚ F to 104˚ F
20% to 80% (without condensation)
Storage Environment
Dimensions (WxHxD)
-10˚C to 50˚C / 14˚ F to 122˚ F
10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C
1221mm(W) x 748mm(H) x 130mm(D) / 48.1"(W) x 29.4"(H) x 5.1"(D)
1400mm(W) x 980mm(H) x 360mm(D) / 55.1"(W) x 38.6"(H) x 14.2"(D)
49.0 kg / 108.0 lbs
Gross
Weight
(without speaker and stand )
Net
Gross
59.0 kg / 130.1 lbs
VESA compatible arm
mounting interface
700mm x 300mm
4 Holes (screw M8 Depth 16mm)
Complied Regulatory
and Guidelines
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick
Power Management
Plug & Play
VESA DPM (Separate HV Sync. only)
VESA DDC2B
Accessories
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps
*Compressed Image
English-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications 60XC10
PDP Module
Diagonal: 60"/1514 mm
Pixel Pitch
Resolution
Horizontal
0.966 mm (W)/0.966 mm (H)
1366 x 768
Frequency
ANALOG: 15.625/15.734kHz, 31.0kHz - 108.5kHz
DIGITAL: 15.625/15.734kHz, 31.0kHz - 91.1kHz
24Hz to 120.4Hz
Vertical
Panel Display Size
Input Signals
1320 mm (W) x 742 mm (H)
51.9 in (W) x 29.2 in (H)
DVI
DVI-D 24pin
Digital RGB
Analog RGB
Sync
DVI (HDCP)
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*, 1920X1080*
0.7V p-p, Input Impedance 75 ohm
VGA
15pin Mini D-sub
VGA60, SVGA60, XGA60, WXGA60, SXGA60, UXGA60*
Separate: TTL level (Pos./Neg.)
Composite sync on Green Video: 0.3Vp-p Neg
Y : 1.0Vp-p/75ohm, Cb/Cr (Pb/Pr) : 0.7Vp-p/75 ohm
DVD/HD1,2
RCA (Y, Cb/Pb, Cr/Pr)
HDMI Type-A
Component
HDTV/DVD:1080p*, 1080i*, 720p@50Hz/60Hz,
576p@50Hz, 480p@60Hz, 576i@50Hz, 480i@60Hz
DVD/HD3
(HDMI)
Digital
Component
HDMI
1080p*,1080i*,720p@ 50Hz/60Hz, 576p@ 50Hz, 480p@ 60Hz, 576i@50Hz,
480i@60Hz
VIDEO1
S-VIDEO
RCA
Composite
S-VIDEO
1.0V p-p Input Impedance 75 ohm
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
DIN 4 pin
Y: 1.0Vp-p/75ohm C: 0.286Vp-p/75 ohm(NTSC),
0.3Vp-p/75ohm(PAL/SECAM)
NTSC/PAL(B, G, M, N)/SECAM/4.43NTSC/PAL60
Stereo L/R 0.5Vrms
Audio
AUDIO Input
RCA (L/R) X3
HDMI Type-A
Analog Audio
DIGITAL Audio PCM 32, 44.1, 48Khz (16bit)
Speaker Output
External Control
External Speaker Jack 8W + 8W (8 ohm)
RS-232C: IN
9 Pin D-sub
RS-232C: OUT
9 Pin D-sub (daisy chain)
Power Supply
7.8-3.2A@100-240V AC, 50/60Hz
Operational Environment
Temperature
Humidity
Temperature
Humidity
Net
0˚ to 40˚C / 32˚ F to 104˚ F
20% to 80% (without condensation)
Storage Environment
Dimensions (WxHxD)
-10˚C to 50˚C / 14˚ F to 122˚ F
10 - 90% (without condensation)/ 90% - 2% x (Temp - 40°C) regarding over 40°C
1447mm(W) x 876mm(H) x 130mm(D) / 57.0"(W) x 34.5"(H) x 5.1"(D)
1620mm(W) x 1100mm(H) x 360mm(D) / 63.8"(W) x 43.3"(H) x 14.2"(D)
70.0 kg / 154.3 lbs
Gross
Weight
(without speaker and stand )
Net
Gross
83.0 kg / 183.0 lbs
VESA compatible arm
mounting interface
700mm x 300mm
4 Holes (screw M8 Depth 16mm)
Complied Regulatory
and Guidelines
UL 60065/CSA C22.2 No.60065/EN60065/IEC60065
FCC-B/DOC-B/EN55022-B/EN55024/EN61000-3-2/EN61000-3-3/CE/C-Tick
Power Management
Plug & Play
VESA DPM (Separate HV Sync. only)
VESA DDC2B
Accessories
Remote control, AA Batteries, Power cord, Users Manual (CD-ROM),
Start Up Guide (Paper / CD-ROM), Main Power Switch cover and screw, Cable clamps
*Compressed Image
English-30
Download from Www.Somanuals.com. All Manuals Search And Download.
42XC10 Supported Resolutions (PC)
English-31
Download from Www.Somanuals.com. All Manuals Search And Download.
42XC10 Supported Resolutions (Video)
English-32
Download from Www.Somanuals.com. All Manuals Search And Download.
50XC10 Supported Resolutions (PC)
English-33
Download from Www.Somanuals.com. All Manuals Search And Download.
50XC10 Supported Resolutions (Video)
English-34
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported Resolutions (PC) 60XC10
English-35
Download from Www.Somanuals.com. All Manuals Search And Download.
60XC10 Supported Resolutions (Video)
English-36
Download from Www.Somanuals.com. All Manuals Search And Download.
Pin Assignment
1) Analog RGB Input (Mini D-SUB 15P) VGA
Pin No. Name
3) RS-232C Input
(D-SUB 9P)
1 Video Signal Red
Pin No. Name
2 Video Signal Green
1
1 Connected to 7 & 8
3 Video Signal Blue
5
2 RXD
4 GND
6
10
3 TXD
5 DDC-GND
11
15
4 Connected to 6
5 GND
6 Red-GND
7 Green-GND
8 Blue-GND
6 Connected to 4
7 Connected to 1 & 8
8 Connected to 1 & 7
9 NC
Mini D-SUB 15P
9 +5V (DDC)
10 SYNC-GND
11 GND
12 DDC-SDA
13 H-SYNC
14 V-SYNC
15 DDC-SCL
5
1
9
6
D-SUB 9P
2) Digital RGB Input (DVI-D) DVI
1 TX2-
9 TX1-
17 TX0-
18 TX0+
2 TX2+
10 TX1+
3 Shield (TX2/TX4)
4 NC
11 Shield (TX1/TX3) 19 Shield (TXP/TX5)
12 NC
13 NC
20 NC
5 NC
21 NC
6 DDC-Serial Clock 14 +5 power
22 Shield (TXC)
23 TXC+
7 DDC-Serial Data
8 NC
15 Ground (+5V)
16 Hot Plug Detect 24 TXC-
8
1
9
16
DVI-D
17
24
English-37
Download from Www.Somanuals.com. All Manuals Search And Download.
WEEE Mark (European Directive 2002/96/EC)
Within the European Union
EU-wide legislation, as implemented in each Member State, requires that waste electrical and electronic products
carrying the mark (leſt) must be disposed of separately from normal household waste. is includes monitors and
electrical accessories, such as signal cables or power cords. When you need to dispose of your NEC display products,
please follow the guidance of your local authority, or ask the shop where you purchased the product, or if applicable,
follow any agreements made between yourself and NEC. e mark on electrical and electronic products only applies
to the current European Union Member States.
e mark on electrical and electronic products only applies to the current European Union Member States.
Outside the European Union
If you wish to dispose of used electrical and electronic products outside the European Union, please contact your
local authority so as to comply with the correct disposal method.
Declaration of the Manufacturer
We hereby certify that the color monitor
P426Y3, P506Y4 or P606Y5 is in compliance
with Council Directive 73/23/EEC:
and marked with
–
EN 60065
Council Directive 89/336/EEC:
— EN 55022
— EN 61000-3-2
— EN 61000-3-3
— EN 55024
NEC Display Solutions Ltd.
4-13-23, Shibaura,
Minato-Ku
Tokyo 108-0023, Japan
DECLARATION OF CONFORMITY
is device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) is
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
U.S. Responsible Party:
Address:
NEC Display Solutions of America, Inc.
500 Park Blvd. Suite 1100
Itasca, IL 60143
Tel. No.:
(630)467-3000
Type of Product:
Equipment Classification:
Model:
Computer Monitor
Class B Peripheral
PlasmaSync 42XC10 (P426Y3)
PlasmaSync 50XC10 (P506Y4)
PlasmaSync 60XC10 (P606Y5)
We hereby declare that the equipment specified above
conforms to the technical standards as specified in the FCC Rules.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
Windows is a registered trademark of Microsoſt Corporation. NEC is a registered trademark of NEC Corporation.
All other brands and product names are trademarks or registered trademarks of their respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
|