NEC CRT Television NLT 26HD1 User Manual

Colour Television

Owner’s Manual

NLT-26HD1 / NLT-32HD1 /

NLT-37HD1 / NLT-42HD1

Please read this manual carefully before operating your set.

Retain it for future reference.

See the label attached on the back cover and quote this information

to your dealer when you require service.

Download from Www.Somanuals.com. All Manuals Search And Download.

Power

Location

This set operates on an AC mains supply, the voltage is as Position your set so that no bright light or sunlight falls

indicated on the label on the back cover. Never apply DC directly onto the screen. Care should be taken not to

power to the set. In the event of thunderstorms or powercuts, expose the set to any unnecessary vibration, moisture,

please pull out the aerial and mains plugs.

dust or heat.

Also ensure that the set is placed in a position to allow a

free flow of air. Do not cover the ventilation openings on

the back cover.

Warning

- To prevent fire or shock hazard, do not expose the set to

rain or moisture. Do not rub or strike the Active Matrix

LCD with anything hard as this may scratch, mar, or

damage the Active Matrix LCD permanently.

Cleaning

Unplug the set before cleaning the face of the LCD Screen.

- The appliance is not intended for use by young children Dust the set by wiping the screen and the cabinet with a

or infirm persons without supervision. soft, clean cloth. If the screen requires additional cleaning,

- Young children should be supervised to ensure that they use a clean, damp cloth. Do not use liquid cleaners or

do not play with the appliance.

aerosol cleaners.

- Avoid displaying fixed pattern in the monitor for long

period of time to avoid image persistence.

The LCD panel is very high technology product

with about million thin film transistors, giving

you fine picture details, Occasionally, a few

non-active pixels may appear on the screen as

a fixed point of blue, green or red. please note

that this does affect the performance of your

product.

Service

Never remove the back cover of the set as this can expose

you to very high voltage and other hazards. If the set does

not operate properly, unplug it and call your dealer.

Aerial

Connect the aerial cable to the socket marked +75 Ω on

the back cover. For the best reception an outdoor aerial

should be used.

Download from Www.Somanuals.com. All Manuals Search And Download.

- All the functions can be controlled with the remote control handset.

- Some functions can also be adjusted with the buttons on the front panel of the set.

- Before you use the remote control handset, please install the batteries.

POWER

Switches the set On from standby or Off to

standby.

MUTE

Switches the sound on or off.

SSM (Sound Status Memory)

Recalls your preferred sound setting.

NUMBER BUTTONS

TV/DTV

Select TV, DTV mode.

I/II

Selects the audio language during dual

language broadcast. (In Digital mode only)

Selects the sound output.

ARC

Select your desired picture format.

PSM (Picture Status Memory)

INPUT SELECT

Recalls your preferred picture setting.

Select DTV, TV, AV1, AV2, S-VIDEO, COMPO-

NENT, PC-RGB, HDMI mode.

Switches the set on from standby.

Selects a menu.

EXIT

LIST

Exits from each mode.

Displays the programme table.

(Programme Up/Down)

D E

Q.VIEW

Returns to the previously viewed programme.

Selects a channel or a menu item.

Switches the set on from standby.

F / G (Volume Down/Up)

Adjusts the volume.

Adjusts menu settings.

Select a closed caption : Off and On. (In

Digital mode only)

TELETEXT BUTTONS (option)

These buttons are used for teletext.

For further details, see the ‘Teletext’ section.

Accepts your selection or displays the

current mode.

PIP PR +/-

Selects a programme for the sub picture.

SWAP

Alternates between main and sub picture.

PIP INPUT

Selects the input mode for the sub picture.

PIP

Switches the sub picture on or off.

A.SWAP

PIP mode - main and sub picture audio

select.

PIP POSITION

Relocates the sub picture in clockwise

direction.

FAV. ADD/DEL

Selects a favourite programme add and

delete. (In Digital mode only)

STILL

Freezes motion of the sub picture.

SCAN

Switches on the programme scan mode

through 4/16 sub pictures.

FAVOURITE

Selects a favourite programme. (In Digital

mode only)

INFO

Displays information on top of the screen

during watching TV. (In Digital mode only)

SLEEP

Sets the sleep timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

- Your remote control handset is powered by two AAA type batteries.

To insert batteries, turn the remote Put the two batteries into the

control handset over and remove the compartment observing battery

Replace the cover.

battery cover.

polarity.

To avoid damage from possible battery leakage,

remove the batteries if you do not plan to use the

remote control handset for an extended period

time. Do not use batteries of differing age or type.

Always discard of batteries safely.

Download from Www.Somanuals.com. All Manuals Search And Download.

- Shown is a simplified representation of the set.

- Here shown may be somewhat different from your set.

ON/OFF

1. MAIN POWER (ON/OFF)

5. INPUT SELECT

Switches the set On or Off.

Select DTV, TV, AV1, AV2, S-VIDEO, COMPONENT,

PC-RGB, HDMI mode.

(Programme Up/Down)

D E

Selects a channel or a menu item.

Switches the set On from standby.

6. POWER (r)

Switches the set On from standby or On to standby.

3. F / G (Volume Down/Up)

Adjusts the volume.

7. POWER/STANDBY INDICATOR (r)

Illuminates red in standby mode.

Adjusts menu settings.

Illuminates green when the set is switched on.

4. MENU

8. REMOTE CONTROL SENSOR

Selects a menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

1. HDMI INPUT / RGB INPUT / AUDIO INPUT SOCKETS 6. Antenna INPUT

Connect the set output socket of the PERSONAL

COMPUTER to this socket.

7. Digital Audio (OPTICAL)

Connect digital audio from various types of equipment.

Note : In standby mode, these ports will not work.

(HDMI & DTV input)

2. AUDIO INPUT / COMPONENT INPUT (480i / 576i /

480p / 576p / 720p / 1080i) SOCKETS

3. AUDIO/VIDEO SOCKET

8. POWER CORD SOCKET

Connect the audio/video out sockets of the VCR to AV

sockets of the set

This set operates on an AC power.

The voltage is indicated on the Specifications page.

Never attempt to operate the set on DC power.

4. S-VIDEO INPUT

Connect video out from an S-VIDEO VCR to the S-

VIDEO input.

5. SERVICE ONLY SOCKET

Download from Www.Somanuals.com. All Manuals Search And Download.

- You can connect additional equipment, such as VCRs, camcorders etc. to your set. However please check with your

manufacturers instruction books for specific information. Make sure all connections are made with both your set and

additional appliance unplugged from the mains to avoid damaging your equipment.

Here shown may be somewhat different from your set.

Antenna Connection

Watching VCR

- Be careful for the bronze wire not to be bender in

connecting to antenna input port.

< Back panel of the set >

S-VIDEO

OUT

(R) AUDIO (L)

VIDEO

< Back panel of VCR >

RF coaxial wire (75 ohms)

- If you connect an S-VIDEO VCR to the S-VIDEO input,

the picture quality is improved; compared to connecting

a regular VCR to the Video input.

- To avoid picture noise (interference), leave an adequate

distance between the VCR and set.

VHF antenna

UHF antenna

Use the INPUT SELECT button on the remote control to

select AV 1 or AV 2 .

wall antenna socket

outdoor antenna

(If connected to S-VIDEO, select the S-Video external

input source.)

Insert a video tape into the VCR and press the PLAY

button on the VCR. (See VCR owner’s manual)

Private house

(connecting to wall outdoor

antenna)

Apartments

(connecting to wall antenna

socket)

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching Cable TV

Watching external AV source

< Back panel of the set >

Camcorder

AUDIO

VIDEO

For cable TV

< Back panel of the external

equipment >

(R) AUDIO (L) VIDEO

Video game set

(R) AUDIO (L) VIDEO

VCR

Cable

< Cable Box >

- After subscribing for a local cable TV station and installing a When connecting the set to an external source,

converter you can watch cable TV.

- For further information of cable TV, contact the local cable TV

station.

match the colours of AUDIO/VIDEO input jacks on

the set with the output jacks on the audio/video

equipment: Video = yellow, Audio (Left) = white,

Audio (Right) = red.

In using connection 1

Select programme number in programme switch of cable box.

Match the set programme with selected programme of cable box.

Use the INPUT SELECT button on the remote

control to select AV 1 or AV 2 .

Select your desired programme with the remote control for cable

box.

Operate the corresponding external equipment.

See external equipment operating guide.

In using connection 2

Use the INPUT SELECT button on the remote control and select

AV 1 or AV 2 .

Tune to cable service provided channels using the cable box.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching DVD

< Back panel of the set >

< Back panel of a DVD player >

(R) AUDIO (L)

S-VIDEO

How to connect

Connect DVD video inputs to Y, Pb, Pr of COMPONENT (DVD INPUT) and audio inputs to Audio sockets of AUDIO

INPUT.

How to use

Turn on the DVD player, and insert a DVD.

Use INPUT SELECT button on the remote control to select Component.

Refer to the DVD player's manual for operating instructions.

Component ports of the

• Component Input ports

You can get better picture quality if you connect DVD player with

component input ports as below.

set

R-Y

B-Y

Video output ports

of DVD player

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting HDMI

< Back panel of the set >

HDMI OUTPUT

(R) AUDIO (L)

< DVI signal input only>

Connect the signal cable from the monitor output socket of HDMI Interface with HDCP Copy Protection enables

the PERSONAL COMPUTER to the HDMI INPUT socket all-digital rendering of video without the losses.

of the set.

This TV SET can receive the High-Definition Multimedia

Connect the audio cable from the PC to the AUDIO INPUT Interface(HDMI) or Input of Digital Visual Interface(DVI).

sockets of the set.

Press the INPUT SELECT button to select HDMI.

Switch on the HDMI, and the HDMI screen appears on the

set.

HDMI input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,

720p-60Hz, 1080i-50Hz, 1080i-60Hz.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting Digital Audio

(HDMI & DTV input)

Connecting PC

< Back panel of the set >

RGB OUTPUT

(R) AUDIO (L)

Connect the signal cable from the monitor output socket of the

PERSONAL COMPUTER to the RGB INPUT socket of the

set.

- Send the set’s audio to external audio equipment

(stereo system) via the Digital Audio Output (Optical)

Caution : Do not look into the optical output port.

Looking at the laser beam may damage your vision.

Connect the audio cable from the PC to the AUDIO INPUT

sockets of the set.

How to connect

Press the INPUT SELECT button to select PC-RGB.

Switch on the PC, and the PC screen appears on the set.

The set can be operated as the PC monitor.

Connect one end of an optical cable to the TV Digital

Audio (Optical) Output port.

Connect the other end of the optical cable to the

digital audio (optical) input on the audio equipment.

Note : Digital Audio Output works, when it’s inputted

RGB input signal : 480p-60Hz, 576p-50Hz, 720p-50Hz,

HDMI signal to the set.

720p-60Hz, 1080i-50Hz, 1080i-60Hz.

Download from Www.Somanuals.com. All Manuals Search And Download.

On and Off

Programme selection

On screen language selection

(option)

Press the main power button to You can select a programme number Press the MENU button and then use

switch the set on.

button to select the SETUP

with the

or NUMBER buttons.

D E

menu.

If the set is in standby mode, press

the POWER,

buttons on the

Press the G button and then use

D E

remote control handset to switch it

on fully.

button to select Language.

Press the ^Gbutton and then use

D E

Press the POWER button on the

remote control handset.

button to select your desired language.

All the on screen displays will appear

in the selected language.

Volume adjustment

Press the F / G button to adjust the

volume.

The set reverts to standby mode.

Repeatedly press the MENU button to

Press the main power button again

to switch the set off.

return to normal TV viewing.

If you want to switch the sound off,

press the MUTE button.

You can cancel it by pressing the

MUTE, F / G, SSM or I/II button.

ON : “GREEN” LED

Stand-by : “RED” LED

During stand-by to ON condition,

the LED will be flashing in

“ORANGE”.

Download from Www.Somanuals.com. All Manuals Search And Download.

- The dialogue between you and your set takes place on screen with an operator menu. The buttons required for the

operating steps are also displayed.

Press the MENU button and then use

Press the G button to display the sub menu or the pull-down menu.

D E

button to display each menu.

Change the setting of an item in the sub or pull-down menu with F / G or

D E

Press the G button and then use

button to select a menu item.

You can move to the higher level menu with F button and to move to the

lower level menu press the G button.

Note : Menus may vary according to input mode.

STATION

PICTURE

SOUND

Auto

CSM

SSM

Manual

Edit

PSM

Balance

AVL

Contrast

Brightness

Colour

Rating

SPDIF Format

Set Password

Sharpness

()}{OOOKOOMENU

SETUP

PIP

TIME

Language

Mode

Clock

PC Control

WXGA

VGA

Input

Off Time

ARC

On Time

Position

Audio Input

Auto Sleep

Time Zone

D. Saving

Input

ARC

Audio Mode

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

- Stations can be tuned using automatic or manual modes.

- All stations that can be received are stored by this method. It is recommended that you use auto programme during

installation of this set.

Press the MENU

button and then use

button to

Press the G button and then use

to select Auto.

button Press the

button to select Search.

D E

Press the G button to begin auto programming.

select the STATION Press the G button to display the Auto menu. All receivable stations are stored.

menu.

Press the

button to select System.

To stop auto programming, press the MENU

button.

D E

Press the F / G button to select ALL, DTV, When auto programming is completed, the

TV.

Edit menu appears on the screen. See the

‘Edit’ section to edit the stored programme.

ALL : Digital & Analogue search

DTV: Digital search only

TV : Analogue search only

Repeatedly press the MENU button to return to

normal TV viewing.

Press the

From.

button to select Storage

Select the beginning programme number

with the F / G button on the Storage From

pull down menu.

STATION

Auto

System

TV _GG

System

Manual

Edit

Manual

Edit

Manual

Edit

Storage From

GGG

Rating

10 %

Set Password

STOP-MENU

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

System

Channel

Fine

- Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign

a station name with five characters to each programme number.

Press the MENU

button and then use

button to

Press the G button and then use

button to select Manual.

Press the

button to select System.

D E

Select a TV system with the F / G button on the

select the STATION Press the G button to display the

System pull-down menu;

menu.

Manual menu.

: NTSC M (USA / Korea / Philippines)

Press the

button to select

BG : PAL B/G, SECAM B/G

Storage.

(Europe/East Europe/Australia)

: PAL I (U.K./Ireland)

DK : PAL D/K, SECAM D/K (East Europe)

Press the F / G button to select the

programme number.

Press the

button to select Channel.

D E

Press the F / G button to select V/UHF or CABLE

on the Channel pull-down menu.

STATION

Auto

Manual

Auto

Storage

System

Channel

Fine

Manual

Edit

Manual

Edit

VHF/UHF

Rating

GGG

Set Password

Name

GGG

Name

GGG

C 14

BOOSTER

()}{OOOKOOMENU

()}{OOO-9OOKOOMENU

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Normally fine tuning is only necessary if

reception is poor.

Press the

button to select Name.

D E

Press the G button on the Name pull-down menu.

Press the button. You can use a blank, +, -, the numeric 0 to 9 and the

Press the

button to select Fine.

D E

alphabet A to Z.

With the button you can select in the opposite direction.

Press the F / G button to fine tune for

the best picture and sound.

Select the position by pressing the F / G button and then take your choice

of the second character, and so on.

Press the

button to select Search.

D E

Press the OK button.

Press the ^F/ G button to commence

searching on the Search pull-down

menu. If a station is found the search will

stop.

In some models, BOOSTER is an optional function.

Only a set with BOOSTER can perform this function.

If the reception is poor at the fringe area of TV signal, select BOOSTER to

On.

If this station is the one required, press

the OK button to store it.

Press the

button to select BOOSTER.

D E

Press the F / G button to select On or Off.

Repeatedly press the MENU button to return to normal TV viewing.

STATION

Auto

Storage

System

Channel

Fine

Storage

System

Channel

Fine

Manual

Edit

Manual

Edit

Manual

Edit

VHF/UHF

Rating

GGG

Set Password

Name

GGG

Name

GGG

C 14

BOOSTER

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

- This function enables you to delete or skip the stored programmes. Also you can move some stations to other

programme numbers or insert a blank station data into the selected programme number.

Press the MENU button and

Deleting a programme

Moving a programme

then use

select the STATION menu.

button to

Select a programme to be deleted with the Select a programme to be moved with

or F / G button. the or F / G button.

D E

Press the G button and then

Press the RED button twice.

The selected programme is deleted, all the

following programmes are shifted up one Move the programme to the desired

Press the YELLOW button.

use

button to select

Edit.

position.

programme number with the

F / G button.

Press the G button twice to

display the Edit menu.

Press the YELLOW button again to

release this function.

Copying a programme

Select a programme to be copied with the

or F / G button.

D E

Press the GREEN button.

All the following programmes are shifted

down one position.

STATION

Auto

- - - - -

Auto

GGG

Manual

Edit

Manual

Edit

Rating

Set Password

Delete

Move

Copy

Skip

Set Password

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

- You can check the programmes stored in the memory by displaying the programme table.

Skipping a programme number

Displaying programme table

Select a programme number to be Press the LIST button to display the Programme table menu.

skipped with the

or F / G button.

The programme table appears on the screen.

D E

One programme table contains ten programmes as below.

Press the BLUE button.

The skipped programme turns to blue.

You may find some blue programmes. They have been set up to be

skipped by auto programming or in the programme edit mode.

Press the BLUE button again to release Some programmes with the channel number shown in the programme

the skipped programme.

table indicate there is no station name assigned.

When a programme number is skipped it

means that you will be unable to select it

Selecting a programme in the programme table

using the

button during normal TV

D E

Select a programme with the

Then press the OK button.

The set switches to the chosen programme number.

or F / G button.

D E

viewing. If you want to select the skipped

programme, directly enter the programme

number with the NUMBER buttons or

select it in the programme edit or table

menu.

Paging through a programme table

There are 10 programme table pages which contain 100 programmes.

Repeatedly press the MENU button to

return to normal TV viewing.

Pressing the

or F / G button repeatedly turns the pages.

D E

Repeatedly press the MENU button to return to normal TV viewing.

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the MENU button and then use

button to

Press the ^Gbutton and then use

button to select

D E

select the STATION menu.

Channel list.

Press the G button and then use

DTV Info.

button to select

Press the G button to display the Channel list menu.

D E

Repeatedly press the MENU button to return to normal

DTV viewing.

STATION

CHANNEL LIST

Auto

Channel list

Ch.3 SBS DIGITAL 1

Ch.7 7 Digital

Manual

DTV Info

Manual

DTV Info

TV Guide

Ch.9 SBS HD

Rating

Ch.11 SBS EPG

Set Password

Ch.12 SBS DIGITAL 2

Ch.15 SBS RADIO1

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

- No Block

Press the MENU button and then use

but-

D / E

All programs can be watched because there is no age limitation.

ton to select the STATION menu.

- R & Above (Restricted 18+)

Programs are blocked for children under the age of 18.

Press the G button and then use

select Rating.

button to

D E

- AV & Above (Adult Audience strong violence 15+)

This program contains the strong violent contents. Therefore,

programs are blocked for children under the age of 15

Press the G button to enter the password as

requested.

- MA & Above (Mature Adult Audience 15+)

Programs are blocked for children under the age of 15.

The TV is set with the initial password “0-0-0-0”.

- M & Above (Mature Audience 15+)

Programs are blocked for children under the age of 15.

Press the

block .

button to select type of ratings to

D / E

- PG & Above (Parental Guidance Recommended)

This programs contains unsuitable materials that parents want

to prevent their children from watching.

Repeatedly press the MENU button to return to

normal DTV viewing.

- G & Above (General Audience)

This programs is designed to be appropriate for all ages.

- Block All

All programs are blocked without considering the age level.

STATION

Auto

Block

Manual

Above

DTV Info

Rating

DTV Info

Rating

AV & Above

MA & Above

Set Password

Above

PG & Above

Above

All

Block

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the MENU button and then use

button to

D / E

select the STATION menu.

Press the G button and then use

button to select

D E

Set password.

Press the G button to enter the password as requested.

The TV is set with the initial password “0-0-0-0”.

Press the G button and then enter a four digit password.

Enter it again when requested.

Repeatedly press the MENU button to return to normal

DTV viewing.

STATION

Auto

New

----

Manual

Confirm

DTV Info

Rating

Set Password

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

CSM (Colour Status Memory)

You can adjust red,

green, or blue to any

colour temperature you

prefer.

To initialize values (reset to

default settings), select the

Normal option.

Press the ^Gbutton and

then use button to

select User.

Press the G button and then

button to select the

desired colour temperature.

/ E

Press the MENU button and

Press the G button and

then use button to

make appropriate adjust-

Repeatedly press the

MENU button to return to

normal TV viewing.

Press the MENU button

then

button to select

D E

and then use

button

the PICTURE menu.

D E

to select the PICTURE

menu.

ments.

Press the G button and

then

CSM.

button to select

Repeatedly press the

MENU button to return to

normal TV viewing.

D / E

Press the ^Gbutton and

then use

button to

select CSM.

PICTURE

CSM

PSM

CSM

PSM

Cool

RED

PSM

Warm

Normal

User

GREEN

BLUE

Contrast

Brightness

Colour

Contrast

Brightness

Colour

Brightness

Colour

Sharpness

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

PSM (Picture Status Memory)

Manual Picture Control

Press the MENU button and

Press the MENU button and Repeatedly

press

the

Press the G button and

then use F / G button to

then use

button to MENU button to return to

then use

button to

select the PICTURE menu. normal TV viewing.

select the PICTURE menu.

make

appropriate

adjustments.

Press the G button and then You can also recall

Press the ^Gbutton and then

use

PSM.

button to select desired picture (Dynamic,

use

button to select the

D E

Standard, Mild, Game

or User) with PSM button

on the remote control. The

You can adjust picture

contrast, brightness,

colour, sharpness and tint

(NTSC input only) to the

levels you prefer.

desired picture option.

Press the G button and then

use button to select a

picture setting on the PSM

picture

Dynamic,

D E

Standard, Mild, Game

are programmed for good

picture reproduction at the

factory and cannot be

changed.

pull-down menu.

PICTURE

CSM

Contrast

Dynamic

PSM

Standard

Contrast

Brightness

Colour

Contrast

Brightness

Colour

Contrast

Mild

Brightness

Game

Colour

User

Sharpness

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Picture format

You can watch TV in various picture formats; 16:9, 14:9, 4:3, ZOOM, PANORAMA, AUTO.

Repeatedly press the ARC button to select your desired picture format.

1. Press the ARC button to select a desired picture format.

• 16:9, 14:9, ZOOM, PANORAMA, AUTO are available at TV, AV1, AV2, S-VIDEO, COMPONENT(480i/576i) input.

• 16:9, H.ZOOM, V.ZOOM, HV.ZOOM are available at DTV input.

• 16:9, 4:3 are available at COMPONENT(480p, 576p/720p, 1080i), PC-RGB, HDMI input.

16 : 9

14 : 9

4 : 3

PANORAMA

AUTO

ZOOM

Download from Www.Somanuals.com. All Manuals Search And Download.

SSM (Sound Status Memory)

Press the MENU button and

Sound Frequency Adjustment

You can also recall a desired sound

(Flat, Music, Movie, Speech or

User) with SSM button on the remote

control. The sound Flat, Music,

Movie and Speech are programmed

for good sound reproduction at the

factory and cannot be changed.

then use

button to select

D E

a. Press the G button in User.

the SOUND menu.

b. Select a sound band by pressing the

Press the G button and then use

F / G button.

button to select SSM.

D E

c. Make appropriate sound level with the

Press the G button and then use

D / E button.

button to select a sound

setting on the SSM pull-down

menu.

d. Press the OK button to store it for the

sound User.

Repeatedly press the MENU

button to return to normal TV

viewing.

SOUND

SSM

Flat

Balance

AVL

Balance

Music

Movie

Speech

User

AVL

SPDIF Format

0.1 0.5

10KHz

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Balance

AVL (Auto Volume Leveler)

Press the MENU button and then use

select the SOUND menu.

button to

Press the MENU button and then use

select the SOUND menu.

button to

Press the G button and then use

AV L .

button to select

Press the ^Gbutton and then use

the desired sound item.

button to select

Press the G button and then use

button to select On

D E

Press the G button and then use F / G button to make

or Off.

appropriate adjustments.

Repeatedly press the MENU button to return to normal TV

viewing.

This feature maintains an equal volume level; even if you

change channels.

SOUND

SSM

Off

Balance

AVL

Balance

AVL

Balance

AVL

SPDIF Format

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

SPDIF Format (in digital mode only)

Note :

Press the MENU button and then use

button to

a : It’s available to use AC-3 or PCM in Dolby Digital

Audio signal.

select the SOUND menu.

b : When it doesn’t apply the Dolby Digital Audio signal,

select the PCM function to output the dolby digital

audio by SPDIF output.

Press the G button and then use

SPDIF Format.

button to select

Press the G button and then use

AC-3 or PCM.

Repeatedly press the MENU button to return to normal

DTV viewing.

SOUND

SSM

AC-3

PCM

Balance

AVL

Balance

AVL

SPDIF Format

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Language selection for dual language broadcast

Stereo/Dual/NICAM reception

If a programme received in two languages (dual language), you can

switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button

repeatedly.

In AV mode, you can select output sound for

the left and right loudspeakers.

Repeatedly press the I/II button to select the

sound output.

DUAL I sends the primary broadcast language to the loudspeakers.

DUAL II sends the secondary broadcast language to the loudspeakers.

DUAL I+II sends a separate language to each loudspeaker.

L+R :Audio signal from audio L input is sent

to left loud-speaker and audio signal from

audio R input is sent to right loudspeaker.

L+L : Audio signal from audio L input is sent

to left and right loudspeakers.

If your set is equipped with the receiver for NICAM reception, the high

quality NICAM (Near Instantaneous Companding Audio Multiplex) digital

sound can be received.

R+R : Audio signal from audio R input is

sent to left and right loud-speakers.

Sound output can be selected according to the type of received

broadcast as follows by pressing the I/II button repeatedly.

When NICAM mono is received, you can select NICAM MONO or FM

MONO.

Mono sound selection

When NICAM stereo is received, you can select NICAM STEREO or FM

In stereo reception if the stereo signal is

weak, you can switch to mono by pressing

the I/II button twice. In mono reception the

depth of sound is improved. To switch back

to stereo, press the I/II button twice again.

MONO. If the stereo signal is weak, switch to FM mono.

When NICAM dual is received, you can select NICAM DUAL I, NICAM

DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected

the display MONO appears on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Clock

[ Auto ]

[ Manual ]

- The time is set automatically from a digital channel - If current time setting is wrong, reset the clock manually.

signal.

- The digital channel signal includes information for the Press the MENU button and then

button to select

D / E

current time provided by the broadcasting station.

- Set the clock manually, if the current time is set

incorrectly by the auto clock function.

the TIME menu.

Press the G button and then

button to select Clock.

D / E

Press the MENU button and then

button to select Press the ^Gbutton and then

button to select

/ E

D / E

the TIME menu.

Manual.

Press the G button and then

Clock.

button to select Press the G button and then

button to adjust the

/ E

D / E

hour.

Press the G button and then

button to select Auto. Press the G button and then

D / E

minute.

Repeatedly press the MENU button to return to normal TV

viewing.

Repeatedly press the MENU button to return to normal TV

viewing.

TIME

Clock

Auto _E

Manual _E

Off Time

02:37 AM

On Time

Auto Sleep

Time Zone

D. Saving

Auto Sleep

Time Zone

D. Saving

Auto Sleep

Time Zone

D. Saving

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

On/Off Time

The off timer automatically switches the set to standby at

the preset time.

Only On time function; Press the G button and then

button to adjust volume level and programe number.

D / E

Press the MENU button and then

the TIME menu.

button to select

D / E

Repeatedly press the MENU button to return to normal TV

viewing.

Press the G button and then

Time or On Time.

button to select Off

D / E

Note :

a.In the event of power interruption (disconnection or power

failure), the clock must be reset.

Press the G button and then

button to select On.

D / E

b.Two hours after the set is switched on by the on time

function it will automatically switch back to standby

mode unless a button has been pressed.

c.Once the on or off time is set, these functions operate

daily at the preset time.

d.Off Timer function overrides On Timer function if they are

set to the same time.

e.The set must be in standby mode for the On Timer to

work.

To cancel Off/On Time function, press the

to select Off.

button

D / E

Press the G button and then

hour.

button to adjust the

D / E

Press the G button and then

minute.

D / E

TIME

Clock

06:59

Off Time

PR.

VOL.

TV 14

On Time

Auto Sleep

Time Zone

D. Saving

Auto Sleep

Time Zone

D. Saving

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto sleep

Time Zone (in digital mode only)

If you select On on the Auto Sleep menu, the set will It’s not available to use this function in Clock Manual

automatically switch itself to standby mode approximately mode.

ten minutes after a TV station stops broadcasting.

Press the MENU button and then

button to select

D / E

Press the MENU button and then

button to select the the TIME menu.

D / E

TIME menu.

Press the G button and then

button to select Time

D / E

Press the G button and then

Sleep.

button to select Auto Zone.

D / E

Press the G button and then

button to select your

D / E

Press the G button and then

Off.

button to select On or viewing area time zone : NSW/ACT, VIC/TAS, QLD,

D / E

SA, WA, NT, Auto Time Zone.

Repeatedly press the MENU button to return to normal TV Repeatedly press the MENU button to return to normal

viewing.

DTV viewing.

TIME

Clock

Off

NSW / ACT

VIC / TAS

QLD

Off Time

On Time

Auto Sleep

Off Time

On Time

Auto Sleep

Time Zone

D. Saving

Auto Sleep

Time Zone

D. Saving

Time Zone

D. Saving

Auto Time Zone

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Daylight Saving (in digital mode only)

Sleep timer

It’s not available to use this function in Clock Manual,

You don’t have to remember to switch the set off before

you go to sleep. The sleep timer automatically switches

the set to standby after the preset time has elapsed.

Press the SLEEP button to select the number of minutes.

Auto Time Zone mode.

Press the MENU button and then

button to select

D / E

the TIME menu.

The display ‘

’ will appear on the screen, followed

- - - min

by 10, 20, 30, 60, 90, 120, 180 and 240. The timer begins

to count down from the number of minutes selected.

Press the G button and then

Saving.

button to select D.

D / E

Note :

Press the G button and then

Off.

button to select On or

D / E

a.To view the remaining sleep time, press the SLEEP

button once.

b.To cancel the sleep time, repeatedly press the SLEEP

Repeatedly press the MENU button to return to normal

DTV viewing.

button until the display ‘

’ appears.

- - - min

c.When you switch the set off, the set releases the preset

sleep time.

TIME

Clock

Off

Off Time

On Time

Auto Sleep

Time Zone

D. Saving

Auto Sleep

Time Zone

D. Saving

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Mode (in digital mode only)

This function lets you select your preferred language for

audio.

Repeatedly press the MENU button to return to normal

DTV viewing.

Press the MENU button and then

button to select

Note : Depending on the broadcast the main or sub

D / E

the Setup menu.

selection may not be available.

Press the G button and then

Mode.

button to select Audio

D / E

Press the G button and then

or Sub.

button to select Main

D / E

SETUP

Language

PC Control

WXGA

Main

Sub

PC Control

WXGA

VGA

Input

ARC

Audio Mode

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

Information (In Digital mode only)

TV Guide (In Digital mode only)

- This function shown the present screen information.

- This function shown the interactive programme guide.

Press the INFO button during watching TV.

The service information appears on screen.

Press the INFO or MENU button to exit.

Press the INFO button to twice.

The TV Guide appears on screen.

Press the INFO or MENU button to exit.

Seven Network

SD/MPEG

576i 16x9

Ch.77

7 Guide

SD/MPEG

18:05

NOW 18:00 ~ 18:30

SEVEN NEWS

SBS SBS DIGITAL 1

Now Toyota World Sport

Next English Premier League...

JENNIFER KEYTE presents to day’s news with ROB GELL updating

the weather. Sport is with TIM WATSON. Ws

NOW 18:30 ~ 19:40

HEARTBEAT

Three farm children are left orphaned, leaving Steve to help the old-

set child fight a custody battle. Vernon opens a campsite, but it is

David who is left to entertain the campers.WS

Download from Www.Somanuals.com. All Manuals Search And Download.

Favourite (In Digital mode only)

FAV. ADD/DEL (In Digital mode only)

- This function lets you select your favourite programmes - This function lets you select your favourite programmes

directly.

add and delete directly

Press the FAVOURITE button during watching TV.

Press the LIST button to display the Channel list menu.

Select a programme to be add/delete with the

button.

The display ‘

’ will appear on the screen.

Favourite on

To cancel the favourite, repeatedly press the FAVOURITE

button until the display ‘ Favourite off ’ appears.

Press the FAV. ADD/DEL button.

The check mark will appear on the screen.

< Favourite on mode >

Ch.3

Ch.7

Ch.15

Ch.11

CHANNEL LIST

Ch.3 SBS DIGITAL 1

Ch.7 7 Digital

Selecting

Favourite

programme

Ch.9 SBS HD

Ch.11 SBS EPG

Ch.12 SBS DIGITAL 2

Ch.15 SBS RADIO1

Download from Www.Somanuals.com. All Manuals Search And Download.

PC Setup

You can adjust horizontal/vertical position, clock, phase, This function allows you to remove any horizontal noise

and auto-configure, reset as you prefer.

and clear or sharpen the image of characters.

Press the MENU button and then

the SETUP menu.

button to select Auto-configure

This function is for the automatic adjustment of the screen

position, clock and phase.

Press the G button and then

button to select the

The displayed image will disappear for a few seconds

while the Auto-configuration is in progress.

desired picture item.

Press the F / G button to make appropriate adjustments.

Reset

This function allows you to return to the good picture

reproduction programmed at the factory and cannot be

changed.

H-Position / V-Position

This function is to adjust picture to left/right and up/down

as you prefer.

Note : Some signal from some graphics boards may not

function properly. If the results are unsatisfactory, adjust

your monitor’s position, clock and phase manually.

Clock

This function is to minimize any vertical bars or stripes

visible on the screen background. And the horizontal

screen size will also change.

Press the OK button to store it for the PC monitor picture.

Press the EXIT button to return to PC mode.

Phase

WXGA or VGA (Only RGB/HDMI mode)

- When the set is inputted DVI-480p signal in VGA mode, select 480p on the SETUP menu.

- When the set is inputted WXGA signal, select the desired WXGA resolution.

SETUP

Language

H-Pos.

V-Pos.

Clock

Phase

Auto

1024X768

1280X768

1360X768

1366X768

640X480

480P

PC Control

WXGA

VGA

PC Control

WXGA

VGA

PC Control

WXGA

VGA

Input

ARC

Reset

Audio Mode

()}{OOOKOOMENU

Download from Www.Somanuals.com. All Manuals Search And Download.

- PIP lets you view 2 different inputs (sources) on your monitor screen at the same time. One source will be large, and

the other source will show a smaller inset image.

PIP Audio Input

Watching PIP

PIP mode - main and sub picture audio select.

Press the PIP button to show the sub picture.

Press the MENU button and then

the PIP menu.

button to select

D / E

• Each press of PIP button changes the screen display as

shown below.

• The PIP function does not work with DTV.

• It’s not available to use 1080i in COMPONENT, PC-

RGB, HDMI mode.

Press the G button and then

Input.

button to select Audio

D / E

Press the G button and then

or Sub.

button to select Main

D / E

Repeatedly press the MENU button to return to normal TV

viewing.

Note : When main picture and sub picture are selected at

the same input, the sub picture selection input will be

changed.

PIP

Main

Sub

Mode

Input

POP

ARC

Position

Audio Input

Off

()}{OOOKOOMENU

DW1

DW2

Download from Www.Somanuals.com. All Manuals Search And Download.

Moving the PIP

Selecting a Input Signal Source for the PIP

Press the PIP POSITION button.

Use the PIP INPUT button to select the input source for

the sub picture.

Press the PIP POSITION button repeatedly until desired

position is achieved. The sub pictures move clockwise.

Programme scan

This function enables you to search all the stored stations

on 4 or 16 sub pictures and see your favorite station by

exchanging the main and sub pictures.

Swapping the PIP

Press the SWAP button to exchange the main and sub

pictures.

When main picture is TV, pressing SCAN will give POP 16.

When main picture is other inputs, pressing SCAN will give

POP4.

The selected sub or main pictures search all the stored

stations.

Press the EXIT button to switch off sub or main pictures.

This function works in the following sub picture mode : TV,

AV1, AV2, S-VIDEO.

Main Picture

Sub Picture

Programme selection for sub picture

Press the PIP PR +/- button. The selected programme

number is displayed just below the programme number of

main picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Teletext (or TOP text) is an optional function, therefore only Four teletext page numbers of your choice can be colour

a set with the teletext system can receive the teletext coded and easily selected by pressing the corresponding

broadcast.

coloured button on the remote control handset.

1. Press a coloured button.

2. Using the NUMBER buttons, select the page you wish

to programme.

3. Press the OK button. The selected page is stored as

the selected page number, blinking once to confirm

this. From now on, you can select this page with the

same coloured button.

4. The three other coloured buttons are programmed in

this way.

Teletext is a free service broadcast by most TV stations

which gives up-to-the-minute information on news, weath-

er, television programmes, share prices and many other

topics.

The teletext decoder of this TV can support the SIMPLE,

TOP and FASTEXT systems. SIMPLE (standard teletext)

consists of a number of pages which are selected by

directly entering the corresponding page number. TOP and

FASTEXT are more modern methods allowing quick and

easy selection of teletext information.

TOP text (option)

The user guide displays four fields-red, green, yellow and

blue at the bottom of the screen. The yellow field denotes

the next group and the blue field indicates the next block.

Switch on/off

Press the TEXT button to switch to teletext.

The initial page or last page appears on the screen.

Two page numbers, TV station name, date and time are

displayed on the screen headline. The first page number

indicates your selection, while the second shows the cur-

rent page displayed.

Block / group / page selection

1. With the blue button you can progress from block to

block.

2. Use the yellow button to proceed to the next group with

automatic overflow to the next block.

3. With the green button you can proceed to the next

existing page with automatic overflow to the next

group.

Press the TEXT button to switch off teletext. The previous

mode reappears.

SIMPLE text

Alternatively the button can be used.

Page selection

4. The red button permits to return to previous selection.

1. Enter the desired page number as a three digit number

with the NUMBER buttons. If during selection you

press a wrong number, you must complete the three

digit number and then re-enter the correct page num-

ber.

Alternatively the button can be used.

Direct page selection

Corresponding to the SIMPLE teletext mode, you can

select a page by entering it as a three digit number using

the NUMBER buttons in TOP mode.

2. The

button can be used to select the preced-

ing or following page.

Programming a colour button in LIST mode

If the TV is in SIMPLE text, TOP text or FASTEXT mode,

press the button to switch to LIST mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

ber.

FASTEXT

Press this button to view the updated teletext page.

The teletext pages are colour coded along the bottom of

the screen and are selected by pressing the correspond-

ing coloured button.

HOLD

Stops the automatic page change which will occur if a tele-

text page consists of 2 or more sub pages. The number of

sub pages and the sub page displayed is, usually, shown

on the screen below the time. When this button is pressed

the stop symbol is displayed at the top left-hand corner of

the screen and the automatic page change is inhibited.

To continue press this button again.

Page selection

1. Press the

button to select the index page.

2. You can select the pages which are colour coded

along the bottom line with the same coloured buttons.

3. Corresponding to the SIMPLE teletext mode, you can

select a page by entering its three digit page number

with the NUMBER buttons in FASTEXT mode.

MIX

Displays the teletext pages superimposed on the TV pic-

ture.

To switch the TV picture off press this button again.

4. The

button can be used to select the preceding

D E

or following page.

TIME

Special teletext functions

When viewing a TV programme, press this button to dis-

play the time at the top right hand corner of the screen.

Press this button again to remove the display. In the tele-

text mode, press this button to select a sub page number.

The sub page number is displayed at the bottom of the

screen. To hold or change the sub page, press the RED /

REVEAL

Press this button to display concealed information, such as

solutions of riddles or puzzles.

Press this button again to remove the information from the

display.

GREEN,

or NUMBER buttons.

D E

Press this button again to exit this function.

SIZE

Selects double height text.

Press this button to enlarge the top half of the page.

Press this button again to enlarge the bottom half of the

page.

Press this button again to return to the normal display.

UPDATE

Displays the TV picture on the screen while waiting for the

new teletext page. The display

left hand corner of the screen. When the updated page is

available then display will change to the page num-

will appear at the top

Download from Www.Somanuals.com. All Manuals Search And Download.

RGB Mode / DVI Mode

Vertical

Frequency (Hz)

Horizontal

Frequency (KHz)

MODE

Resolution

70.0

85.0

60.0

72.0

75.0

85.0

56.0

60.0

72.0

75.0

85.0

60.0

70.0

75.0

85.0

60.0

70.0

75.0

85.0

60.0

75.0

85.0

60.0

75.0

640X350

720X400

31.5

37.9

31.5

37.8

37.5

43.2

35.1

37.9

48.0

46.9

53.7

48.4

56.4

60.0

63.9

75.0

79.9

91.1

47.7

60.1

68.5

49.0

75.0

49.7

DOS

Note:

a. If the set is cold, there may be a small “flicker” when the

set is switched on. This is normal, there is nothing wrong

with the set.

b. If possible, use the VESA 1,024x768@60Hz video mode

to obtain the best image quality for your LCD monitor. If

used to PC vertical frequency 85Hz, some noise can be

seen when PIP is on.

640X480

800X600

VGA

SVGA

In this case, set the PC vertical frequency to 60Hz. The

set has been pre-adjusted to the mode VESA

1,024x768@60Hz.

c. Some dot defects may appear on the screen, like Red,

Green or Blue spots. However, this will have no impact

or effect on the monitor performance.

d. Do not press the LCD screen with your finger for a long

time as this may produce some temporary distortion

effects on the screen.

e. When the PC screen appears on the set, a message

may appear on the screen, and the message will differ

according to the Window system version (Win98, 2000).

If a message appears click “Next” until the message

finishes.

f. If the message “Out Of Range” appears on the screen,

adjust the PC as in the ‘Displayable Monitor

Specification’ section.

1024X768

XGA

1280X1024

1280X768

SXGA

WXGA

1360X768

1366X768

1600X1200

832X624

UXGA

MAC

(Synchronization input form : separate)

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptoms

No picture, no sound

Sound OK, poor picture

Picture OK, poor sound

Picture blurred

Lines or streaks in picture

Poor reception on some channels

No colour

Poor colour

Remote control does not work

Incorrect position

Vertical bars or stripes on background

Horizontal noise

Signal Cable message appears

Check these items and try to adjust these

The mains plug-(plugged in and switched on)

Is the TV switched on

Try another channel (weak signal)

Check aerial (plugged into TV?)

Check aerial (broken lead?)

Check aerial

Check for local interference

Adjust contrast

Adjust brightness

Adjust colour

Adjust volume

Check the batteries in remote control

Check Audio/Video sockets (VCR only)

Auto-configure or adjust the H/V position

Auto-configure or adjust Clock

Auto-configure or adjust Clock Phase

Is the Signal Cable connected or loose

Download from Www.Somanuals.com. All Manuals Search And Download.

Model

NLT-26HD1

Main body

Horizontal size 818.8 mm

Height 457(508.6) mm

Thickness 102.3(138.5) mm

(With stand)

PAL-BG, I, DK / SECAM-BG, DK / NTSC-M

Television system

Television programme

LCD Panel

VHF : 0 ~ 11 UHF : 28 ~ 69 Cable : S1 ~ S41

26" wide TFT LCD panel

WXGA (1366 X 768)

140W

Resolution

Power consumption

Stand by Power consumption

External antenna impedance

Audio output

Below 3W

75 Ω

15W + 15W

External IN/OUT ports

• HDMI IN 1

• PC IN 1

• S-VIDEO IN 1

• COMPONENT IN 1

• SERVICE IN 1

• SPDIF OUT 1

• AV IN 2

• ANTENNA IN 1

• PC AUDIO IN 1

100-240v~ , 2.5A-1.5A, 50/60Hz

AC Power

Net Weight

Gross Weight

18Kg

20Kg

Note.

a. Although LCD panel uses highly precise technology, it may display blank pixels, dark spots, or lightning

on the screen. This is normal and not an indication of a defect.

b. Technical specification are subject to change without notice.

Download from Www.Somanuals.com. All Manuals Search And Download.

Model

NLT-32HD1

Main body

Horizontal size 950 mm

Height 515(569.9) mm

Thickness 104(169) mm

(With stand)

PAL-BG, I, DK / SECAM-BG, DK / NTSC-M

Television system

Television programme

LCD Panel

VHF : 0 ~ 11 UHF : 28 ~ 69 Cable : S1 ~ S41

32" wide TFT LCD panel

WXGA (1366 X 768)

160W

Resolution

Power consumption

Stand by Power consumption

External antenna impedance

Audio output

Below 3W

75 Ω

15W + 15W

External IN/OUT ports

• HDMI IN 1

• PC IN 1

• S-VIDEO IN 1

• COMPONENT IN 1

• SERVICE IN 1

• SPDIF OUT 1

• AV IN 2

• ANTENNA IN 1

• PC AUDIO IN 1

100-240v~ , 2.5A-1.5A, 50/60Hz

AC Power

Net Weight

Gross Weight

19Kg

23Kg

Download from Www.Somanuals.com. All Manuals Search And Download.

Model

NLT-37HD1

Main body

Horizontal size 1094 mm

Height 604(662.5) mm

Thickness 130(235) mm

(With stand)

PAL-BG, I, DK / SECAM-BG, DK / NTSC-M

Television system

Television programme

LCD Panel

VHF : 0 ~ 11 UHF : 28 ~ 69 Cable : S1 ~ S41

37" wide TFT LCD panel

WXGA (1366 X 768)

200W

Resolution

Power consumption

Stand by Power consumption

External antenna impedance

Audio output

Below 3W

75 Ω

15W + 15W

External IN/OUT ports

• HDMI IN 1

• PC IN 1

• S-VIDEO IN 1

• COMPONENT IN 1

• SERVICE IN 1

• SPDIF OUT 1

• AV IN 2

• ANTENNA IN 1

• PC AUDIO IN 1

100-240v~ , 2.5A-1.5A, 50/60Hz

AC Power

Net Weight

Gross Weight

37Kg

42Kg

Download from Www.Somanuals.com. All Manuals Search And Download.

Model

NLT-42HD1

Main body

Horizontal size 1242 mm

Height 680(739) mm

Thickness 119(235) mm

(With stand)

PAL-BG, I, DK / SECAM-BG, DK / NTSC-M

Television system

Television programme

LCD Panel

VHF : 0 ~ 11 UHF : 28 ~ 69 Cable : S1 ~ S41

42" wide TFT LCD panel

WXGA (1366 X 768)

240W

Resolution

Power consumption

Stand by Power consumption

External antenna impedance

Audio output

Below 3W

75 Ω

15W + 15W

External IN/OUT ports

• HDMI IN 1

• PC IN 1

• S-VIDEO IN 1

• COMPONENT IN 1

• SERVICE IN 1

• SPDIF OUT 1

• AV IN 2

• ANTENNA IN 1

• PC AUDIO IN 1

100-240v~ , 2.5A-1.5A, 50/60Hz

AC Power

Net Weight

Gross Weight

39Kg

50Kg

Download from Www.Somanuals.com. All Manuals Search And Download.

NEC Australia Pty. Ltd.

ABN 86 001 217 527

Home Electronics Group

NEC Service Centers

PH:131-632

New South Wales

Sydney

Newcastle

184 Milperra Rd, Revesby 2212

120 Parry Street, Newcastle West 2302

131-632

Victoria

Melbourne

Unit 1/6 Garden Road, Clayton 3168

131-632

Queensland

Brisbane

Southport

Unit 4/305 Montague Road, West End 4101

Shop 1,48 Ferry Road, Southport 4215

131-632

South Australia

Adelaide

84A Richmond Rd, Keswick, 5053

45 Sarich Court, Osborne Park 6017

131-632

Western Australia

Perth

For Service in outer areas, please contact your NEC retailer for the address of the nearest Authorised NEC

Service Center.

NEC Australia Pty. Ltd.

Home Electronics Group

244 Beecroft Road EPPING 2121

Tel:131 632

Fax:(02) 9877 2353

Download from Www.Somanuals.com. All Manuals Search And Download.

P/NO : MAN06GDP018 a

(GPN06MA013B, NEC)

Download from Www.Somanuals.com. All Manuals Search And Download.

Miele Clothes Dryer 09 379 040 User Manual
MTD Snow Blower 190 833 OEM User Manual
Nady Systems Microphone USB 5H User Manual
NordicTrack Treadmill NTTL16901 User Manual
Nortel Networks Network Card 553 3901 200 User Manual
NuTone Ventilation Hood RF 68HRPSC User Manual
Ocean Kayak Marine Instruments 14561 User Manual
Olympus Microscope Magnifier CX41 User Manual
Omnitron Systems Technology Switch 1Fx+4U User Manual
Panasonic Digital Camera DMC FX30 User Manual