OPERATION & PARTS MANUAL
Moonlight SERIES
MODELS
MB150
MB400
MB400B
MB1000
MB1000W
LIGHTING SYSTEM
Revision #0 (10/27/06)
To find the latest revision of this
publication, visit our website at:
THIS MANUAL MUST ACCOMPANYTHE EQUIPMENT AT ALLTIMES.
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective:January 1st, 2006
PARTS ORDERING PROCEDURES
Ordering parts has never been easier!
Choose from three easy options:
Best Deal!
Order via Internet (Dealers Only)
Orderpartson-lineusingMultiquip’sSmartEquipwebsite!
:
If you have an MQ Account, to obtain a
Username and Password, E-mail us at:
■
■
■
View Parts Diagrams
Order Parts
PrintSpecificationInformation
To obtain an MQ Account, contact your
District Sales Manager for more information.
Use the internet and qualify for a 5% Discount
on Standard orders for all orders which include
complete part numbers.*
Gotowww.multiquip.comandclickon
to log in and save!
Order Parts
Note: Discounts Are Subject To Change
Fax your order in and qualify for a 2% Discount
on Standard orders for all orders which include
complete part numbers.*
Order via Fax (Dealers Only)
:
All customers are welcome to order parts via Fax.
Domestic (US) Customers dial:
1-800-6-PARTS-7 (800-672-7877)
Note: Discounts Are Subject To Change
Domestic (US) Dealers Call:
1-800-427-1244
Order via Phone:
Non-Dealer Customers:
International Customers should contact
their local Multiquip Representatives for
Parts Ordering information.
Contact your local Multiquip Dealer for
parts or call 800-427-1244 for help in
locating a dealer near you.
When ordering parts, please supply:
❒
❒
❒
❒
❒
❒
Dealer Account Number
❒
Specify Preferred Method of Shipment:
✓
UPS/Fed Ex
✓ DHL
Dealer Name and Address
■
■
Priority One
Ground
✓
Truck
Shipping Address (if different than billing address)
Return Fax Number
Applicable Model Number
■ Next Day
■
Second/ThirdDay
Quantity, Part Number and Description of Each Part
AllordersaretreatedasStandardOrders
andwillshipthesamedayifreceivedprior
to 3PM PST.
NOTE
WE ACCEPT ALL MAJOR CREDIT CARDS!
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 3
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SAFETY MESSAGE ALERT SYMBOLS
Potential hazards associated with the MOONLIGHT Lighting
System operation will be referenced with Hazard Symbols
which appear throughout this manual, and will be referenced
in conjunction with Safety Message Alert Symbols.
FORYOUR SAFETY ANDTHE SAFETY OF OTHERS!
Safety precautions should be followed
at all times when operating this
equipment. Failure to read and
understand the Safety Messages and
Operating Instructions could result in
injury to yourself and others.
HAZARD SYMBOLS
CAUTION - Rotating Parts
This manual has been developed
NEVER operate equipment with covers,
or guards removed. Keep fingers, hands,
hair and clothing away from all moving
parts to prevent injury.
to provide complete instructions
for the safe and efficient operation
of the MQ MOONLIGHT Lighting
System.
Before using this Lighting System, ensure that the operating
individual has read and understood all instructions in this
manual.
CAUTION - Sight and Hearing Hazards
ALWAYS wear approved eye and
hearing protection.
SAFETY MESSAGE ALERT SYMBOLS
The three (3) Safety Messages shown below will inform you
about potential hazards that could injure you or others. The
Safety Messages specifically address the level of exposure
to the operator, and are preceded by one of three words:
DANGER, WARNING, or CAUTION.
CAUTION - Equipment Damage Messages
Other important messages are provided throughout this
manual to help prevent damage to your lighting system,
other property, or the surrounding environment.
DANGER
You WILL be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
This lighting system, other
property, or the surrounding
environment could be
WARNING
damaged if you do not follow
instructions.
You CAN be KILLED or SERIOUSLY injured if you DO
NOT follow directions.
CAUTION
You CAN be INJURED if you DO NOT follow directions.
PAGE 4 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — RULES FOR SAFE OPERATION
■
ALWAYS make sure that the MOONLIGHT is secure on
WARNING - READTHIS MANUAL
firm level ground so that it cannot slide or shift around,
endangering workers. Also keep the immediate area free
Failure to follow instructions in this manual may lead to
Serious Injury or even Death. This equipment is to be
operated by trained and qualified personnel only! This
equipment is for industrial use only.
of bystanders
.
■
■
■
ALWAYS keep area behind MOONLIGHT clear of people
while raising and lowering mast.
The following safety guidelines should always be used
when operating the MOONLIGHT Lighting System.
To prevent the MOONLIGHT from overturning, NEVER use
in winds that exceed 22 mph(10m/s).
To prevent the MOONLIGHT from rolling, ALWAYS place
the MOONLIGHT on a firm flat surface. Surface slant
should not exceed 5 degrees.
The following safety guidelines should always be used when
operating the MOONLIGHT Lighting System:
GENERAL SAFETY
■
The MOONLIGHT should only be used in temperatures
between 23°-104° Fahrenheit (-5° to 40° Celsius).Failure
to comply with these operating parameters could cause
the lamp to malfunction.
■
DO NOT operate or service this
equipment before reading this entire
manual.
■
■
NEVER use the MOONLIGHT in rain, snow or areas of
■
■
This equipment should not be operated by persons under
18 years of age.
high humidity that could generate electrical storms.
NEVER operate this equipment without proper protective
clothing, shatterproof glasses, steel-toed boots and other
protective devices required by the job.
CHECK the mast and winch cables for wear.If any problem
occurs when lower or raising the mast STOP immediately!
Contact a trained MQ technician for assistance.
■
■
NEVER pivot or retract mast while unit is operating.
NEVER use the MOONLIGHT mast as a crane. DO NOT
lift anything with the mast.
■
■
NEVER attach anything to the MOONLIGHT mast.
■
■
NEVER operate this equipment when not feeling
well due to fatigue, illness or taking medicine.
ALWAYS lower the mast when not in use, or if high winds
or electrical storms are expected in the area
.
NEVER operate this equipment under the influence of
drugs or alcohol.
MAST SAFETY
■
When raising or lowering the mast,
keep hands and fingers clear of
the various mast sections, this will
prevent hands and fingers from
getting pinched.
PINCH
POINT
■
■
■
Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.
Manufacturer does not assume responsibility for any
accident due to equipment modifications.
NEVER use accessories or attachments, which are not
recommended by Multiquip for this equipment. Damage
to the equipment and/or injury to user may result.
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 5
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — RULES FOR SAFE OPERATION
LAMP SAFETY AND CARE
TRANSPORTING
■
NEVER leave any grease or oil residue on lamp surface
when replacing or removing lamp. This can create hot
spots, reducing the service life of the lamp.
■
When transporting the MOONLIGHT over rough terrain,
remove the lamp and pack it safely so it will not be
damaged.
■
■
ALWAYS make sure the lamp surface is clean and dry.
ALWAYS replace with MQ recommended type lamp. See
parts section of this manual.
DANGER - MOONLIGHT High Danger Areas
The DANGER items listed below and on the next page are
considered High DANGER areas and should be adhered
to.Failing to understand these areas could result in Bodily
Harm, Electrical Shock, Electrocution, and even Death!
Please pay close attention when operating the
MOONLIGHT.
■
■
■
■
■
NEVER use force when installing a lamp. Excessive force
could cause the lamp to break causing bodily harm.
ALWAYS make sure the balloon support assembly is
secure and the knob tightened.
NEVER attempt to replace lamp with the power on. Always
unplug the power cord when changing the lamp.
NEVER unplug the lamp's AC power cable during
operation.
DANGER - Mounting Accessory Tipping
ALWAYS allow a sufficient amount of time for the lamp to
cool before changing. The possibility exists of severe
burns.
ALWAYS make sure that the mounting pole, cart, stand
or tripod is properly secured to prevent tipping! Use
sandbags or stakes to secure the mounting accessory
as necessary.
■
■
■
■
ALWAYS have a trained technician install and remove
lamp, or replace any damaged fixture wiring.
To prevent the balloon from deformation, NEVER use
MOONLIGHT in strong winds.
DO NOT place the balloon inside storage case until the
lamp has had a sufficient amount of time to cool down.
ALWAYS place the balloon inside its storage case after
each use.This will prolong the life of the balloon material,
keeping it protected from harsh environmental elements.
■
■
DO NOT use a damaged balloon. Replace balloon
immediately if damaged. In addition, a damaged balloon
will not inflate properly.
ALWAYS keep the balloon away from sharp objects and
excessive amounts of heat (fire!).
PAGE 6 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — RULES FOR SAFE OPERATION
Maintenance Safety
DANGER - MOONLIGHT Electric Shock Hazards
■
NEVER lubricate components or attempt service on a running
ALWAYS keep electrical cords in good condition.Worn,
MOONLIGHT.
bare or frayed wiring can cause electrical
shock, thus causing Bodily Harm or
WET
HANDS
■
ALWAYS allow the MOONLIGHT a proper amount of time to
cool before servicing.
even Death.
■
■
Keep the MOONLIGHT in proper running condition.
NEVER grab or touch a live power
cord with wet hands, the possibility
exists of Electrical Shock,
Fix damage to the MOONLIGHT immediately and always
replace broken parts.
POWER
CORD
(POWER ON)
Electrocution, and even Death!
■
ALWAYS use the required tool for the job application.
Using damaged or worn tools or using tools inappropriate
for the required application is very dangerous, and may
cause damage to
DANGER - MOONLIGHT Electric Shock Hazards
DANGER - MOONLIGHT Electric Shock Hazards
the machine and
service personnel.
Make sure to use
NEVER operate the
the appropriate tool
MOONLIGHT or handle any
electrical equipment while
standing in water, while barefoot,
while hands are wet, or in the
rain. A dangerous electrical
shock could occur causing
Severe Bodily Harm or even
Death.
for the specific job.
Emergencies
■
ALWAYS know the location of the
nearest fire extinguisher.
■
■
ALWAYS know the location of the nearest
first aid kit.
In emergencies always know the location of the nearest phone
or keep a phone on the job site. Also know the phone
numbers of the nearest ambulance, doctor and fire
department. This information will be invaluable in case of
an emergency.
DANGER - MOONLIGHT Overhead Obstructions
ALWAYS make sure the area
above MOONLIGHT is open
and clear of overhead power
lines and other obstructions.
The tower extends in excess of
16 ft. (5 meters). Contact with
overhead power lines or other
obstructions could result in
equipment damage, Serious
Injury or Death!
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 7
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — DIMENSIONS
BALLOON
MOUNTING
POLE
A
B
E
C
BALLOON
SUPPORT
BASE
D
F
BASE
G
H
Reference
Letter
Reference
Letter
Dimension in. (mm.)
Dimension in. (mm.)
MB400B/MB100/W - 54 (1372)
MB150 - 33.5 (851)
A
E
118.5 (3010)
B
C
D
25 (635)
11 (279)
67 (1702)
F
G
H
3.5 (89)
8 (203)
21.5 (546)
Figure 1. Balloon Dimensions
PAGE 8 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — DIMENSIONS
Reference
Letter
Reference
Dimension in. (mm.)
Dimension in. (mm.)
Letter
A
B
C
10.5 (267)
43 (1092)
8 (203)
D
E
12 (305)
32 (813)
Figure 2. MBC Cart Dimensions
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 9
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SPECIFICATIONS
Table 1. Specifications
Moonlight
Model
MB1000/MB1000W
110 VAC
MB400/MB400B
110 VAC
MB150
110 VAC
60 Hz
Input Voltage
Frequency
Max. Current
60 Hz
60 Hz
15 Amps
15 Amps
15 Amps
Wind Stability
(when base is secured)
55 mph (88.5 kph)
80 lbs. (36 kg)
55 mph (88.5 kph)
55 mph (88.5 kph)
49 lbs. (22 kg)
Weight (without mount)
66 lbs. (30 kg)/74 lbs. (33.5 kg)
Lamp
1000 Watt Metal Halide/
1000 Watt Tungsten
Lamp Type
400 Watt Metal Halide
150 Watt Metal Halide
Lumens
110,000/21,500
150 ft. (45.72 meters)
12,000 hours/variable
4500° K/3200° K
42,000
100 ft. (30.5 meters)
10,000 hours
4500° K
15,000
80 ft. (24.38 meters)
10,000 hours
4500° K
Light Coverage (360°)
Average Life
Color Temperature
Balloon
33.5 inches (851 mm)/
54 inches (1372 mm)
Diameter
54 inches (1372 mm)
Fire Retardant PVC
33.5 inches (851 mm)
Fire Retardant PVC
Material
Fire Retardant PVC
158°/176°F
(70°/80°C)
158°/176°F
(70°/80°C)
158°/176°F
(70°/80°C)
Maximum Usage Temperature
275°/320°F
(135°/160°C)
275°/320°F
(135°/160°C)
275°/320°F
(135°/160°C)
Deformation Point
Water Resistance
100 %
100 %
100 %
MBP (option)
67 in. (1702 mm)
(with 67 in. telescope)
67 in. (1702 mm)
(with 67 in. telescope)
67 in. (1702 mm)
(with 67 in. telescope)
Pole
Maximum Height
10 feet (3 meters)
10 feet (3 meters)
8 feet (2.4 meters)
PAGE 10 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — FLOODLIGHT FOOTCANDLE PLOT
Based on 360°glare-free coverage.
1.01
1.57
3.06
8.43
12.08
18.02
Scale: .5 IN. = 20 ft.
Values listed as footcandles
Figure 3. MB1000 Floodlight Footcandle Plot
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 11
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — FLOODLIGHT FOOTCANDLE PLOT
Based on 360°glare-free coverage.
.84
2.04
2.6
5.39
8.36
Scale: .5 IN. = 10 ft.
Values listed as footcandles
Figure 4. MB150 Floodlight Footcandle Plot
PAGE 12 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — GENERAL INFORMATION
The Multiquip MOONLIGHT Lighting System is a general
DANGER - MOONLIGHT Overhead Obstructions
purpose glare-free floodlight intended for applications such
as security lighting, traffic control, freeway projects, jobsites,
emergency lighting, indoor lighting, corporate functions and
backyard parties.
ALWAYS make sure the area
above MOONLIGHT is open
and clear of overhead power
lines and other obstructions.
The tower extends in excess
of 16 ft. (5 meters). Contact
with overhead power lines or
other obstructions could
The Moonlight Lighting System provides illumination without
the need to constantly inflate the balloon.
The Moonlight Balloon comes in different models:
1000 Series - MB1000, MB1000W
400 Series - MB400, MB400B
result in equipment damage,
Serious Injury or Death!
150 Series - MB150
These models are shipped in a storage case that includes
the following:
Bulbs
„
„
„
„
„
„
„
„
Balloon
Balloon Support Assembly
Lamp
Lamp System with Retainer Clip
Ballast (Except MB1000W)
Ballast Cable (Except MB1000W)
Blower
The lighting system of Multiquip's MOONLIGHT (MB1000,
MB400, MB400B, and MB150) is comprised of one "Metal
Halide" lamp.This lamp has no filament (electric arc) therefore
vibrations will not cause bulb failure. The bulbs can last up
to 10,000 hours.The MB1000W is equipped with aTungsten
Carbide bulb. This bulb uses a filament and is not
recommended for use in high vibration areas.
Blower Charger Cord
For ease of service or transport, the lamp is equipped with
a quick-disconnect connector that allows the lamp fixture to
be removed quickly. This feature is extremely useful during
transport of the MOONLIGHT over rough terrain.It is always
best to remove the lamp and pack it safely so it will not be
damaged.
Mounting Accessories
Mounting Accessories are available from the MQ Sales
department such as:
MBC - 4-Wheel Generator Cart
MBS - 2-Wheel Transport Stand
MBP - Mounting Pole
DANGER - Mounting AccessoryTipping
ALWAYS make sure the mounting stand is properly
secured to prevent tipping! Use sandbags or stakes
to secure the mounting accessory as necessary.
MBT - Tripod (for MB150 and MB400 only)
Balloons
The balloon is made of airtight, fire-retardant, PVC-type
material, and once it is inflated, can stay taut for
months.The balloon can sustain at least 55 miles/hour
winds.
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 13
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — COMPONENTS
18
17
1
2
3
5
4
6
7
16
8
15
12
14
9
10
13
11
Figure 5. Major Components
(54-inch Balloon with Optional MBP)
PAGE 14 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — COMPONENTS
Figure 5 shows the location of the controls and components
for the MOONLIGHT Lighting System. The function of each
control is described below:
9. Wing Nut– Secures the stand into the base. Tighten
screw to lock stand in place.
10. Metal Stand Base – Keeps the lighting system firmly set
1. Balloon – This balloon is made of airtight PVC material
with a diameter of 54 inches (MB400B, MB1000/W) or
33.5 inches (MB150).
on the ground.
11. AC Power Cable – Connect this cable to a 120 VAC, 60
Hz power source.
2. Balloon Velcro Straps – Secures the balloon in place
when attached to the support assembly (except 33.5-
inch models).
12. ON/OFF Switch – Place this switch in the ON position
to turn on the lamp.To turn off the lamp place in the OFF
position. Please wait for approximately 10 minutes be-
fore attempting to turn the lamp back on.
3. BalloonSupportAssembly–Supportstheballoonwith
the velcro straps in place (except 33.5-inch models).
13. Ballast –Provides the necessary electronics to light the
4. Mounting Metal Rods – Used to hold balloon in the
stand support adapter. Included with balloon support
assembly on 54-inch models and included with balloon
on 33.5-inch models.
lamp.
14. Blower – Used to inflate the balloon.
15. Ballast Cable – Connects the ballast to the lamp
assembly.
5. Stand Support Adapter (with extrusion)– A pole that
connects the balloon support assembly to the stand, to
adjust the height of the balloon.
16. Snap Ring – Ensures a complete seal of the balloon
when the lamp is attached.
17. Lamp Assembly – Screw lamp into this assembly. If
lampbecomesdifficulttoscrewintoassemblyorassem-
bly is damaged, replace assembly.
6. AdapterBoltLock–Securesthestandsupportadapter
to the balloon support assembly when tightened.
7. Height Adjustment Knob – Adjusts the height of the
pole (stand support adapter). When the pole is at the
desired height, tighten lock to secure pole in place.
18. Lamp – 1000-watt, 400-watt, or 150-watt metal-halide
type lamp. Replace only with MQ recommended type
lamp. Always allow a sufficient amount of time for the
lamp to cool down before changing.
8. Stand – Supports the complete lighting system.
Items 5 to 10 are part of the MBP Mounting Pole.The Moonlight Balloon can also be mounted
to the MBC 4-wheel Generator Cart, MBS 2-Wheel Transport Stand, or the MBT Tripod
(MB150 and MB400 only).
NOTE
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 15
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — ASSEMBLY
MBC CART ASSEMBLY
If the Moonlight balloon is to be mounted into the MBC Cart,
perform the following assembly procedure before installing
the balloon.
1. Step on the ON position of the brake on the wheel of
the MBC cart to keep the cart in place during assem-
bly. See Figure 6.
T-HANDLE
CLAMP
STEP ON “ON”
PEDAL TO
ACTIVATE
BRAKE.
Figure 9. Clamped T-Handle
4. Slide mast into the slot in the cart as shown in Figure 10.
Tighten the 4 bolts to keep the mast in place.
Figure 6. Setting the Brake On
MAST
2. Install the T-handle as shown in Figure 7 and tighten
the bolt.
SCREW
TIGHTEN BOLTS
(4 PLACES)
T-HANDLE
Figure 10. MBC Mast Installation
NUT
5. Remove the pin near the top of the mast and insert the
extrusion on the top of the mast. Reinsert the pin to
hold extrusion in place. See Figure 11.
Figure 7. T-Handle Installation
3. Install the clamp as shown in Figure 8 and tighten with
bolt. Push handle towards clamp to secure handle in
place as shown in Figure 9.
EXTRUSION
NUT
PIN
SCREW
CLAMP
Figure 8. Clamp Installation
PAGE 16 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Figure 11. Extrusion Installation
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — ASSEMBLY
2. Step on the leg lock to release each leg and pull down
until it locks in place (see Figure 14).
6. Install the winch handle on the mast as shown in
Figure 12.
WINCH HANDLE
Figure 12. Winch Handle Installation
TO PREVENT SERIOUS
INJURY OR DEATH
Figure 14. Stand Legs Deployed
DANGER!
ALWAYS MAKE SURE AREA
3. Slide mast into the stand and and tighten the two nuts
as shown in Figure 15.
ABOVE MAST IS OPEN
AND CLEAR OF OVERHEAD
POWER LINES. THE POSSIBILITY
EXISTS OF ELECTROCUTION,
SHOCK, EVEN DEATH! IF THE
MAST
BALLOON COMES IN CONTACT
WITH HIGH VOLTAGE LINES.
ON
GA-6HA
0N
V
120
120
OFF
OFF
AC VOLTMETER
120V
CONTROL
IDLE
OFF
SWITCH
OPERATION
120/240V
30A
120
30A
120
21A
20A
AC CIRCUIT
BREAKER
1201V2/024V0V
FULL POWER
SWITCH
7. The cart is now ready for the balloon to be installed.
Proceed to BALLOON INFLATION section.
MBS STAND ASSEMBLY
If the Moonlight balloon is to be mounted into the MBS Stand,
perform the following assembly procedure before installing
the balloon.
1. Attach the 4 legs of the stand as shown in Figure 13.
Figure 15. MBS Mast Installation
Figure 13. Stand Legs Installation
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 17
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — ASSEMBLY
4. Install the winch handle on the mast as shown in
MBT TRIPOD ASSEMBLY
Figure 12.
The MBT Tripod can be used with the MB150 and MB400
Balloons.The MBT Tripod is shipped pre-installed.
5. The stand is now ready for the balloon to be installed.
Proceed to BALLOON INFLATION section.
1. To secure the legs in place, loosen the knob (see Figure
17), pull the legs out and tighten the knob.
TO PREVENT SERIOUS
INJURY OR DEATH
DANGER!
ALWAYS MAKE SURE AREA
ABOVE MAST IS OPEN
AND CLEAR OF OVERHEAD
POWER LINES. THE POSSIBILITY
EXISTS OF ELECTROCUTION,
SHOCK, EVEN DEATH! IF THE
BALLOON COMES IN CONTACT
WITH HIGH VOLTAGE LINES.
MAST
TWIST KNOB
TO LOCK LEGS
6. When balloon and mast are removed and stored, the
MBS stand legs can be stowed as shown in Figure 16.
Figure 17. MBT Tripod Adjustments
TO PREVENT SERIOUS
INJURY OR DEATH
DANGER!
ALWAYS MAKE SURE AREA
ABOVE POLE IS OPEN
AND CLEAR OF OVERHEAD
POWER LINES. THE POSSIBILITY
EXISTS OF ELECTROCUTION,
SHOCK, EVEN DEATH! IF THE
BALLOON COMES IN CONTACT
WITH HIGH VOLTAGE LINES.
POLE
2. The tripod is now ready for the balloon to be installed.
Proceed to BALLOON INFLATION section.
Figure 16. Stand Legs Stored
PAGE 18 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — ASSEMBLY
MBP POLE ASSEMBLY
If the Moonlight balloon is to be mounted into the MBP Pole,
perform the following assembly procedure before installing
the balloon.
1. Insert the pole (see Figure18) into the base and secure
by tightening the wing nut on the base.
Figure 18. MBP Mounting Pole Assembly
2. The pole is now ready for the balloon to be installed.
Proceed to BALLOON INFLATION section.
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 19
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SETUP
2. Unfold the PVC material of the balloon enough to allow
the light fixture to be inserted into the balloon base. If
necessary, use the supplied blower to help expand the
PVC material as shown in Figure 21.
CAUTION - READ MANUAL
Please read this entire manual carefully
before attempting to operate the
MOONLIGHT. Failure to read this
manual could cause damage to the
MOONLIGHT and serious injury to the operator.
The rechargeable blower is
shipped with a minimal
charge. Use AC adapter to
charge before use.
NOTE
BALLOON COMPONENTS
The various components of the balloon are contained in a
case. Figure 19 shows all the different parts.
BALLOON
SUPPORT
BASE
(EXCEPT MB150
AND MB400)
BLOWER
CHARGER
CORD
BLOWER
Figure 21. Expanding the Balloon PVC Material
LAMP
BALLAST
(EXCEPT
MB1000W)
3. Install the lamp fixture into the balloon. Do not force the
bulb against the PVC material as this may damage the
bulb.Set the snap ring (Figure 22) into the o-ring groove
to ensure a complete seal of the balloon.
LAMP
FIXTURE
BALLOON
SNAP
RING
BALLAST
CABLE
Figure 19. Balloon Components
BALLOON INFLATION
1. Screw the lamp into the lamp fixture as shown in Fig-
ure 20.
Figure 22. Installing the Lamp Fixture
4. Unscrew the cap (Figure 23) on the lamp fixture and
use blower to inflate balloon until it is taut. Screw the
cap back on and tighten.
Figure 20. Inserting the Lamp
Figure 23. Inflating the Balloon
PAGE 20 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SETUP
BALLOON INSTALLATION
MB150/MB400(33.5-inchBalloons)
MB1000/MB1000W/MB400B(54-inchBalloons)
1. For MB150 and MB400 (33.5-inch balloons), insert the
1.
For MB1000/W and MB400B (54-inch balloons), insert
balloon metal rods into the extrusion on the mounting
accessory (MBP, MBC, MBS, or MBT) and tighten the
knobs to secure them in place (see Figure 26).
the balloon support base metal rods into the extrusion
on the mounting accessory (MBP, MBC, or MBS) and
tighten the knobs to secure them in place. See Figure
24.
BALLOON
SUPPORT
METAL
BASE
RODS
KNOBS
KNOBS
EXTRUSION
EXTRUSION
Figure 24. Attaching the Support Baseto the Extrusion
(MB1000/MB1000W/MB400B-54-inchBalloons)
Figure 26. Attaching Balloon to the Extrusion
(MB150/MB400 - 33.5-inch Balloons)
2. Slowly invert the balloon and place over the installed
balloon support base (Figure 25), making sure lamp
fixture is facing down and the Velcro straps are aligned
with the holes on the balloon support base.Insert Velcro
strips into the holes and fasten securely.
BALLOON DISASSEMBLY
1. To disassemble unit, perform balloon inflation steps in
reverse order. Allow the lamp to cool for 15 minutes
before attempting to disassemble unit.
BALLOON
VELCRO
STRAP
( 6 PLACES)
BALLOON
SUPPORT
BASE
EXTRUSION
Figure 25. Attaching Balloon to Support Base
(MB1000/MB1000W/MB400B-54-inchBalloons)
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 21
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SETUP
MAST HEIGHT ADJUSTMENT (MBC and MBS)
DANGER - Mounting Accessory Tipping
1. To adjust the height of the mast on the MBC cart or
ALWAYS make sure that the mounting pole, cart, stand
or tripod is properly secured to prevent tipping! Use
sandbags or stakes to secure the mounting accessory
as necessary.
MBS stand, rotate the winch handle until the mast is at
the desired height (see Figure 28).
ROTATE
WINCH HANDLE
Figure 28. MBC and MBS Mast Height Adjustment
CAUTION - Mast Safety
POLE HEIGHT ADJUSTMENT (MBP)
1. To adjust the height of the pole, loosen the height ad-
justment knob (see Figure 27) on the MBP mounting
pole and slowly pull up the inner pole to the desired
height.Tighten the height adjustment knob.
When raising or lowering the mast, keep hands and fingers
clear of the various mast sections, this will prevent hands
and fingers from getting pinched.
POLE HEIGHT ADJUSTMENT (MBT)
1. To adjust the height of the pole on the MBT tripod, re-
move the pin that holds the pole in place and loosen
the knob (see Figure 29). Adjust the pole to the desired
height and tighten knob to secure pole. Put back the
pin to lock pole in place.
PULL OUT
INNER POLE
TO ADJUST
HEIGHT
KNOB
LOOSEN KNOB TO
ADJUST POLE HEIGHT
REMOVE PIN TO
RELEASE POLE
Figure 27. MBP Pole Height Adjustment
CAUTION - Pole Safety
When raising or lowering the pole, keep hands and fingers
clear of the section between the pole and the inner pole.
This will prevent hands and fingers from getting pinched.
Figure 29. MBT Pole Height Adjustment
PAGE 22 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — OPERATION
ELECTRICALCONNECTIONS(MB150/MB400/MB400B/
MB1000)
DANGER - Electric Shock Hazards
WET
HANDS
ALWAYS keep electrical cords in
good condition. Worn, bare or
frayed wiring can cause electrical
shock, thus causing Bodily Harm
1. Insert the female end of the ballast cable (Figure 30)
into the connector on the lamp fixture.Insert the male
end of the ballast cable into the female connector on
the ballast.
or even Death.
POWER
CORD
(POWER ON)
NEVER grab or touch a live power
cord with wet hands, the possibility exists of Electrical
Shock, Electrocution, and even Death!
3. Place the ON/OFF switch to the ON position to turn on
lamp. The lamp should flicker for a few minutes as the
internal gases warm up. It should reach full power within
4 minutes.
BALLAST
CABLE
BALLAST
Shutdown
1. Place the power ON/OFF switch (Figure 31) in the OFF
position.
Figure 30. Connecting the Ballast Cable
ELECTRICALCONNECTIONS(MB1000W)
1. Make sure the power ON/OFF switch (Figure 31) located
1. Plug the power cable from the MB1000W directly to a
110V/60 Hz power source (Figure 32).The lamp should
automatically light.
on the ballast is in the OFF position.
ON/OFF SWITCH
2. To turn off lamp, diconnect power cable.
1
CAUTION - LAMP COOL DOWN
Allow a sufficient amount of time (15-20 minutes) for the
lamp to cool down before attempting to disassemble
unit.
Figure 31. Power OFF/ON Switch
MOVINGTHE BALLOON
1. When moving balloon around, make sure that the pole
or mast is lowered to the shortest height possible and
make sure pole or mast is securely fastened.
2. Plug the power cable from the ballast to a 110V/60 Hz
power source (Figure 32).
MOONLIGHT
RECEPTACLE
POWER CABLE
DANGER - Overhead Obstructions
When moving the Moonlight, ALWAYS
be on the lookout for overhead
obstructions such as high voltage
power lines. The possibility exists of
electrocution, even death if the
MOONLIGHT comes in contact with high
voltage power lines!
EXTERNAL
(110 VAC/60 Hz)
POWER SOURCE
Figure 32. Connecting to 110 VAC Receptacle
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 23
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MAINTENANCE
L1
B1
B2
P1
P2
L2
E3
P3
E2
E1
PAGE 24 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MAINTENANCE
For a prolonged life cycle an extended quality follow the
recommended MOONLIGHT service guidelines as referenced
in Table 3.
TABLE 2. PERIODIC CHECK AND MAINTENANCE
PART CHECK ITEM
Defective lamp?
FIGURE
SOLUTION
Replace.
L1
L2
Lamp
Cable/Connector
❖
■
❖
❖
■
❖
■
❖
❖
❖
Lamp
Cable disconnected or loose?
Defective or Worn?
Not working properly?
Bolt loose?
Connect securely.
Replace.
B1 Balloon
B2 Blower
P1 Bolt Lock
Balloon
Pole
Repair or replace.
Tighten securely.
Replace.
P2
P3
Pole
Damaged?
Wing Nut
Nut loose?
Tighten securely.
Replace.
E1 Power Cable
Defective or worn cable?
Damaged?
Electric
E2
E3
Plug
Replace.
On/Off Switch
Not working properly?
Repair or replace.
❖
- Daily Check
■
- Every 20 Hours
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 25
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM —TROUBLESHOOTING
If the problem cannot be remedied, please leave the unit
just as it is and consult or company's service department.
Practically all breakdowns can be prevented by proper
handling and maintenance inspections, but in the event of a
breakdown, please take a remedial action following the
diagnosis based on theTroubleshooting (Table 3) information
shown below.
TABLE 3. TROUBLESHOOTING
SYMPTOM
POSSIBLE PROBLEM
SOLUTION
Is ballast cable securely connected?
Plug in correctly.
Are generator and light tower switched on? Turn on switch.
Is lamp loose?
Screw lamp securely into socket.
Are any other electric appliances (other
than light tower) plugged into power
source?
Unplug all other appliances.
Lamp does not light.
Is generator voltage normal (non-load
voltage - 110 VAC)?
Repair or replace generator.
Use genuine MQ lamp.
Is model of lamp compatible?
Is lamp cool enough to light again?
(Interval of 20 to 30 minutes is required
before turning on lamp again)
Wait for lamp to cool down.
Repair or replace generator.
Is generator voltage normal (non-load
voltage - 110 V)?
Lamp only lights for a
short time.
Is ambient temperature too high (more than Move lamp where there is proper
104 °F (40 °C)?
ventilation.
Is blower working properly?
Does balloon have a leak?
Check or recharge blower.
Repair or replace balloon.
Balloon does not
inflate.
PAGE 26 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 27
Download from Www.Somanuals.com. All Manuals Search And Download.
EXPLANATION OF CODE IN REMARKS COLUMN
The following section explains the different symbols and remarks QTY. Column
used in the Parts section of this manual. Use the help numbers
found on the back page of the manual if there are any questions.
Numbers Used - Item quantity can be indicated by a number,
a blank entry, or A/R.
A/R (As Required) is generally used for hoses or other parts
that are sold in bulk and cut to length.
The contents and part numbers listed in the parts section are
subject to change without notice. Multiquip does not
guarantee the availability of the parts listed.
A blank entry generally indicates that the item is not sold
separately. Other entries will be clarified in the “Remarks”
Column.
Sample Parts List:
REMARKS Column
NO. PART NO. PART NAME
QTY. REMARKS
Some of the most common notes found in the “Remarks”
Column are listed below. Other additional notes needed to
describe the item can also be shown.
1
2
2
3
4
12345
BOLT ....................... 1.... INCLUDES ITEMS W/
WASHER, 1/4 IN. ........... NOT SOLD SEPARATELY
WASHER, 3/8 IN. .... 1.... MQ-45TONLY
HOSE .................... A/R.. MAKE LOCALLY
BEARING ................ 1.... S/N2345B AND ABOVE
*
*
*
12347
12348
12349
Assembly/Kit - All items on the parts list with the same unique
symbol will be included when this item is purchased.
Indicated by:
“INCLUDES ITEMS W/(unique symbol)”
NO. Column
Unique Symbols - All items with same unique symbol
Serial Number Break - Used to list an effective serial number
range where a particular part is used.
( , #,
+
, %, or >) in the number column belong to the same
*
assembly or kit, which is indicated by a note in the “Remarks”
column.
Indicated by:
“S/N XXXXX AND BELOW”
“S/N XXXX AND ABOVE”
“S/N XXXX TO S/N XXX”
Duplicate Item Numbers - Duplicate numbers indicate
multiple part numbers are in effect for the same general item,
such as different size saw blade guards in use or a part that
has been updated on newer versions of the same machine.
Specific Model Number Use - Indicates that the part is used
only with the specific model number or model number variant
listed. It can also be used to show a part is NOT used on a
specific model or model number variant.
When ordering a part that has more
than one item number listed, check
the remarks column for help in
determining the proper part to order.
NOTE
Indicated by:
“XXXXX ONLY”
“NOT USED ON XXXX”
“Make/Obtain Locally” - Indicates that the part can be
purchased at any hardware shop or made out of available
items. Examples include battery cables, shims, and certain
washers and nuts.
PART NO. Column
Numbers Used - Part numbers can be indicated by a number,
a blank entry, orTBD.
TBD (To Be Determined) is generally used to show a part that
has not been assigned a formal part number at time of
publication.
“Not Sold Separately” - Indicates that an item cannot be
purchased as a separate item and is either part of an
assembly/kit that can be purchased, or is not available for
sale through Multiquip.
A blank entry generally indicates that the item is not sold
separately or is not sold by Multiquip. Other entries will be
clarified in the “Remarks” Column.
PAGE 28 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — SUGGESTED SPARE PARTS
MOONLIGHT LIGHTING SYSTEM
1TO 3 UNITS
Qty.
P/N
Description
Remarks
1 ......... 04568.......................... RING, SNAP ....................................................ALL MODELS
1 ......... 04569.......................... CAP, FILL .........................................................ALL MODELS
1 ......... 29903.......................... MOUNT, LIGHT ................................................ALL MODELS
1 ......... QS1869 ...................... PIN, SNAP 1/4” ................................................ALL MODELS
1 ......... MLHIT1000/U/LU/4K .. LAMP, 1000 W HID ...........................................MB1000
1 ......... MLHIT400/HBU/T15 ... LAMP, 400 W HID .............................................MB400
1 ......... MLHIT150 ................... LAMP, 150 W HID .............................................MB150
1 ......... 19850.......................... TIRE/RIM 410/350 X4 PNEUMATIC.................MBC, MBS
1 ......... 29920.......................... CASTER, 10" SWIVEL W/BRK ........................MBC
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 29
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — NAMEPLATE AND DECALS
NAMEPLATE AND DECALS
1
2
PAGE 30 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — NAMEPLATE AND DECALS
NAMEPLATE AND DECALS
NO.
1
2
PART NO.
DCL1000
DCL1010
PART NAME
DECAL; WARNING LABEL, CORD-WRAP
DECAL; MOONLIGHT, POLE
QTY.
1
1
REMARKS
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 31
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — BALLOON (WITH MBP) ASSY.
BALLOON ASSY.
10
1
9
2
12
3
11
6
4
8
5
7
PAGE 32 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — BALLOON (WITH MBP) ASSY.
BALLOON ASSY.
NO.
1
1
PART NO.
MLMLB54
MLMLB33
MLPC31
PART NAME
QTY.
REMARKS
PVC BALLOON, 54"........................................ 1 .......... MB1000, MB1000W, MB400B
PVC BALLOON, 33.5"..................................... 1 .......... MB400, MB150
PETG PLASTIC SUPPORT BASE ................. 1 .......... MLB54
2
3
4
5
6
7
7
7
8
ML780322
ML780321
ML0015
INNER TELESCOPIC POLE
OUTER TELESCOPIC POLE
PLASMA CUT STEEL BASE
15-FT CONNECTOR CABLE
BALLAST, 1000 W / 110 V
BALLAST, 400 W / 110 V
BALLAST, 150W / 110 V
BLOWER (INFLATOR)
1
1
1
1
1
1
1
1
MLCA15
MLBAL1000
MLBAL400
MLBAL150
MLC400
9
9
MLLK1000/400
MLLK150
ELECTRICAL SYSTEM (LAMP) ..................... 1 .......... FOR 1000 AND 400 W LAMPS
ELECTRICAL SYSTEM (LAMP) ..................... 1 .......... FOR 150 W LAMP
10
10
10
11
12
MLHIT1000/U/LU/4K LAMP, 1000 W HID
1
1
1
1
1
MLHIT400/HBU/T15
MLHIT150
ML04568
LAMP, 400 W HID
LAMP, 150 W HID
RING, SNAP
ML04569
CAP, FILL
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 33
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM —MAST ASSY. (MBC and MBS)
MAST ASSY.
16
3
7
1
12
9
8
12
14
2
5
2
11
4
17
6
8
4
15
18
10
13
PAGE 34 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MAST ASSY. (MBC and MBS)
MAST ASSY.
NO.
1
2
3
4
5
6
7
8
PART NO.
0181 B
0730
1579
23793-001
4001
PART NAME
QTY. REMARKS
WASHER, LOCK 1/4” MED
SCREW, HHC 1/4-20 X 1
SCREW, HHC 1/4-20 X .5
WHEEL-CONVEYOR CART, MASONRY SAW
WASHER, FLAT USS 3/8 PLD
SCREW, HHC 3/8-16 X .75
PIN CLEVIS 1/4 X 7/8”
1
2
1
2
3
3
1
2
1
1
1
8
1
1
1
1
1
1
4196
5133
10024
29854
29891
29894
29902
29903
29910
29915
29916
29919
QS1869
NUT, NYLOC 1/4-20
MAST W/A, LOWER
MAST W/A, UPPER
MAST W/A, MIDDLE
GUIDE, MAST SLIDE
MOUNT, LIGHT
WINCH BRACKET, 1500 DL 5149646
CABLE, LOWER MAST, 1/8 X 96”
CABLE, UPPER, MAST, 3/32 X 57”
SWAGE, AL 3/32 X 57”
PIN, SNAP 1/4”
9
10
11
12
13
14
15
16
17
18
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 35
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MBC CART ASSY.
MBC CART ASSY.
13
14
11
12
4
7
9
1
3
2
8
1
3
15
5
10
6
PAGE 36 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MBC CART ASSY.
MBC CART ASSY.
NO. PART NO PART NAME
QTY
12
2
REMARKS
1
2
0205
3615
SCREW, HHC 3/8-16 X 1.0
COLLAR, SET 3/4 ID
3
4
5
6
7
8
9
10
11
12
13
14
15
4001
WASHER, FLAT USS 3/8 PLD
NUT, NYLOC 10-32
NUT, NYLOC 3/8-16
12
1
8
1
2
1
1
2
1
1
1
2
1
10019
10133
10176
19850
29017
29909
29920
29927
29928
29933
29934
5065B
NUT, NYLOC 1/2-13
TIRE/RIM 410/350 X4 PNEUMATIC
SCREW, HHC 1/2-13 X 5-1/2
CLIP, 1" SPRING, GIBSON #225-L
CASTER, 10" SWIVEL W/BRK
CLAMP, MAST W/A, MBC
CART BASE, W/A, MBC
HANDLE W/A, MBC
MAT, RUBBER V RIB, 5.5 X 29.75
SCREW, PHP 10-32 X 1/2
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 37
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MBS STAND ASSY.
MBS STAND ASSY.
12
2
7
14
11
13
4
2
3
6
10
2
5
9
8
1
PAGE 38 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
MOONLIGHT LIGHTING SYSTEM — MBS STAND ASSY.
MBS STAND ASSY.
NO
1
PART NO
3615
PART NAME
QTY
2
14
2
4
4
4
4
2
1
4
4
4
4
REMARKS
COLLAR, SET 3/4 ID
WASHER, FLAT USS 3/8 PLD
SCERW, HHC 3/8-16 X.75
NUT, NYLOC 10-32
2
3
4001
4196
4
5
6
7
8
9
10
11
12
13
14
10019
10133
10176
19716
19850
29905
29908
29909
29913
5065 B
06503-030
NUT, NYLOC 3/8-16
NUT, NYLOC 1/2-13
CRUTCHTIP
TIRE, RIM 410/350 x4 PNEUMATIC
BASE W/A
RATCHET LOCK W/A
CLIP, 1" SPRING, GIBSON #225-L
SUPPORT LEG W/A
SCREW, PHP 10-32 X 1/2
SCREW, HHC 1/2-13 X 3-3/4
4
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Effective: February 22, 2006
TERMS AND CONDITIONS OF SALE — PARTS
PAYMENT TERMS
5. Partsmustbeinnewandresalablecon- Multiquipreservestherighttoquoteandsell
dition,intheoriginalMultiquippackage(if directtoGovernmentagencies,andtoOriginal
any), and with Multiquip part numbers Equipment Manufacturer accounts who use
Terms of payment for parts are net 30 days.
FREIGHTPOLICY
clearlymarked.
our products as integral parts of their own
products.
All parts orders will be shipped collect or
prepaidwiththechargesaddedtotheinvoice.
All shipments are F.O.B. point of origin.
Multiquip’sresponsibilityceaseswhenasigned
manifesthasbeenobtainedfromthecarrier,
andanyclaimforshortageordamagemustbe
settledbetweentheconsigneeandthecarrier.
6. Thefollowingitemsarenotreturnable:
SPECIALEXPEDITINGSERVICE
a. Obsolete parts. (If an item is in the
price book and shows as being re- A$35.00surchargewillbeaddedtotheinvoice
placedbyanotheritem,itisobsolete.) forspecialhandlingincludingbusshipments,
insuredparcelpostorincaseswhereMultiquip
mustpersonallydeliverthepartstothecarrier.
(such as gaskets, seals, “O” rings,
b. Any parts with a limited shelf life
andotherrubberparts)thatwerepur- LIMITATIONSOFSELLER’SLIABILITY
MINIMUMORDER
chasedmorethansixmonthspriorto
thereturndate.
Multiquip shall not be liable hereunder for
damagesinexcessofthepurchasepriceofthe
The minimum charge for orders from Mul-
tiquipis$15.00net.Customerswillbeasked
for instructions regarding handling of orders
notmeetingthisrequirement.
c. Anylineitemwithanextendeddealer item with respect to which damages are
netpriceoflessthan$5.00.
claimed, and in no event shall Multiquip be
liable for loss of profit or good will or for any
otherspecial,consequentialorincidentaldam-
ages.
d. Special order items.
RETURNEDGOODSPOLICY
e. Electricalcomponents.
f. Paint,chemicals,andlubricants.
g. Decalsandpaperproducts.
h. Itemspurchasedinkits.
Returnshipmentswillbeacceptedandcredit
willbeallowed,subjecttothefollowingprovi-
sions:
LIMITATIONOFWARRANTIES
Nowarranties,expressorimplied,aremade
in connection with the sale of parts or trade
accessoriesnorastoanyenginenotmanufac-
tured by Multiquip. Such warranties made in
connectionwiththesaleofnew,completeunits
are made exclusively by a statement of war-
rantypackagedwithsuchunits,andMultiquip
neitherassumesnorauthorizesanypersonto
assume for it any other obligation or liability
whatever in connection with the sale of its
products.Apartfromsuchwrittenstatementof
warranty, there are no warranties, express,
impliedorstatutory,whichextendbeyondthe
descriptionoftheproductsonthefacehereof.
1. AReturnedMaterialAuthorizationmust
be approved by Multiquip prior to ship-
ment.
7. Thesenderwillbenotifiedofanymaterial
receivedthatisnotacceptable.
2. ToobtainaReturnMaterialAuthorization,
alistmustbeprovidedtoMultiquipParts
Salesthatdefinesitemnumbers,quanti-
ties, and descriptions of the items to be
returned.
8. Suchmaterialwillbeheldforfiveworking
days from notification, pending instruc-
tions.Ifareplyisnotreceivedwithinfive
days,thematerialwillbereturnedtothe
senderathisexpense.
a. Thepartsnumbersanddescriptions
must match the current parts price
list.
9. Creditonreturnedpartswillbeissuedat
dealer net price at time of the original
purchase,lessa15%restockingcharge.
b. The list must be typed or computer
generated.
10. In cases where an item is accepted, for
which the original purchase document
can not be determined, the price will be
basedonthelistpricethatwaseffective
twelvemonthspriortotheRMAdate.
c. The list must state the reason(s) for
thereturn.
d. The list must reference the sales
order(s)orinvoice(s)underwhichthe
itemswereoriginallypurchased.
11. Credit issued will be applied to future
purchasesonly.
e. The list must include the name and
phonenumberofthepersonrequest-
ingtheRMA.
PRICINGANDREBATES
Prices are subject to change without prior
notice.Pricechangesareeffectiveonaspe-
cificdateandallordersreceivedonorafterthat
datewillbebilledattherevisedprice.Rebates
3. AcopyoftheReturnMaterialAuthoriza-
tionmustaccompanythereturnshipment.
4. Freight is at the sender’s expense. All forpricedeclinesandaddedchargesforprice
partsmustbereturnedfreightprepaidto increaseswillnotbemadeforstockonhand
Multiquip’sdesignatedreceivingpoint.
atthetimeofanypricechange.
PAGE 40 — MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06)
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE PAGE
MOONLIGHT LIGHTING SYSTEM — OPERATION & PARTS MANUAL — REV. #0 (10/27/06) — PAGE 41
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION & PARTS MANUAL
HERE'S HOW TO GET HELP
PLEASE HAVETHE MODEL AND SERIAL
NUMBER ON-HANDWHEN CALLING
UNITED STATES
Multiquip Corporate Office
18910 Wilmington Ave.
Carson, CA 90746
MQ Parts Department
800-427-1244
310-537-3700
Tel. (800) 421-1244
Fax (800) 537-3927
Fax:800-672-7877
Fax:310-637-3284
Contact: [email protected]
Mayco Parts
800-306-2926
310-537-3700
Warranty Department
800-421-1244, Ext. 279 Fax:310-537-1173
310-537-3700, Ext. 279
Fax:800-672-7877
Fax:310-637-3284
Service Department
800-421-1244
Technical Assistance
800-478-1244
Fax:310-537-4259
Fax:310-631-5032
310-537-3700
MEXICO
MQ Cipsa
UNITED KINGDOM
Multiquip (UK) Limited Head Office
Hanover Mill, Fitzroy Street,
Ashton-under-Lyne,
Carr. Fed. Mexico-Puebla KM 126.5
Momoxpan, Cholula, Puebla72760Mexico
Tel: (52) 222-225-9900
Fax: (52) 222-285-0420
Tel: 0161 339 2223
Fax: 0161 339 3226
Lancashire OL7 0TL
CANADA
Multiquip
BRAZIL
Multiquip
4110IndustrielBoul.
Laval, Quebec, Canada H7L 6V3
Tel: (450) 625-2244
Fax: (450) 625-8664
Av. Evandro Lins e Silva, 840 - grupo 505 Tel: 011-55-21-3433-9055
Barra de Tijuca - Rio de Janeiro Fax: 011-55-21-3433-9055
© COPYRIGHT 2006, MULTIQUIP INC.
Multiquip Inc., Mikasa, and the MQ logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other
trademarks are the property of their respective owners and used with permission.
This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.
The information and specifications included in this publication were in effect at the time of approval for printing. Illustrations are based on the Moonlight Lighting System.
Illustrations, descriptions, references and technical data contained in this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the
right to discontinue or change specifications, design or the information published in this publication at any time without notice and without incurring any obligations.
Your Local Dealer is:
Download from Www.Somanuals.com. All Manuals Search And Download.
|