4CH H.264 Multiplex DVR
User Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
All the safety and operating instructions must be read before the unit is operated.
•
•
Make sure to switch the power off before you install the DVR.
There is the danger of an electric shock if the DVR is opened by an unqualified service
engineer or installer.
•
Avoid using the DVR outside of the reference temperature and humidity indicated in the
specification.
•
•
•
•
•
•
Avoid exposing the DVR to violent movement or vibration.
Do not use or store the DVR in direct sunlight or near to any source of heat.
Do not place any object into the holes used for air circulation.
Always use the DVR in a well ventilated location to prevent overheating.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
II
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Chapter 1 FEATURES .........................................................................................................1
Chapter 2 MAIN MENU OPERATION..................................................................................2
2.1 Quick Setup............................................................................................................2
2.2 Network Remote Instructions..................................................................................4
2.3 Playback Mode.......................................................................................................5
2.4 PTZ Mode...............................................................................................................6
Chapter 3 INSTALLATION ...................................................................................................8
3.1 System Configuration .............................................................................................8
3.2 Hard Disk Installation..............................................................................................9
Chapter 4 BASIC OPERATION and MENU SETUP..........................................................11
4.1 Main Menu Setup..................................................................................................11
4.2 Record Setup........................................................................................................12
4.3 Event Setup..........................................................................................................14
4.4 Schedule Setup ....................................................................................................17
4.5 Camera Setup.......................................................................................................18
4.6 Account Setup.......................................................................................................19
4.7 Network Setup......................................................................................................20
4.8 PTZ & RS-485 Setup............................................................................................27
4.9 System Setup .......................................................................................................28
4.10 Utility Setup.........................................................................................................34
4.11 Diagnostic ...........................................................................................................35
Chapter 5 SEARCH & BACKUP........................................................................................36
5.1 Search Setup........................................................................................................36
5.2 Backup Setup .......................................................................................................39
Chapter 6 SPECIFICATION...............................................................................................40
Chapter 7 NETWORK SURVEILLANCE............................................................................42
7.1 Remote Connection..............................................................................................42
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does the author make a commitment to update the information herein.
III
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 FEATURES
ꢀ Two USB ports (for mouse usage and backup).
ꢀ Dual streaming enhances the speed of network transmission
ꢀ Built-in VGA output up to 1024x768 resolution
ꢀ Individual setup of resolution, frame rate and video quality for each channel
ꢀ Still image snapshot
ꢀ AVI converter with time stamp
ꢀ H.264 compression ideal for saving HDD space
ꢀ Real time live display
ꢀ Live display, record, backup, playback and network access simultaneously
ꢀ Picture-in-picture monitoring and 2X to 8X ditital zoom display
ꢀ Control Methods: front panel, USB mouse, IR remote controller, client viewer
ꢀ Intuitive GUI for easy configuration and menu driven operation
ꢀ Pan / Tilt / Zoom camera control
ꢀ Data backup: USB devices, network
ꢀ Event triggered with email notification: motion detection, alarm, video loss
ꢀ Supports Internet Explorer with same GUI as DVR site
ꢀ Multi-language OSD
ꢀ Central Management System (CMS)
ꢀ 3G/ GPRS mobile phone monitoring
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 MAIN MENU OPERATION
2.1 Quick Setup
Graphic Icons
Resting the cursor on this icon will bring up the four (Main Menu/ Search/
Backup/ PTZ) menu icons.
MAIN MENU.
SEARCH SETUP.
BACKUP.
PTZ CONTROL.
Turn On/Off recording.
PLAYBACK
Resting the cursor on this icon will bring up five (PAUSE/ PIP/ ZOOM/
AUTO SEQ/ LOCK) display icons.
PAUSE, to pause LIVE image
PIP, picture in picture
ZOOM, zoom in / out the screen size
AUTO-sequence
LOCK, activate the key lock.
Full screen display, multiple clicking to switch channels
Quad display.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
GUI Hints and Tips
Recording is on
Number represents the current selected LIVE audio channel
Live Audio is off
Motion detected on the channel
Sensor triggered on the channel
Video loss detected on the channel
USB device detected
DVR has been connected onto the Internet.
AUTO-SEQ is on
FREZZE is on, screen is frozen
LOCK is on
PTZ control is on
Shows the current hard disk space used-up (99% means that the HDD
space has been used up 99%, and the remaining HDD space is 1%)
99%
Current time which is used when providing the convertion of AVI files is
shown on the bottom lower right of each DVR screen.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Network Remote Instructions
Same user and DVR-site interface, the only difference is network toolbar which is
situated on the lower bottom right.
Icon
Description
Low Video Quality (LQ)
/
High Video Quality (HQ)
* Please refet to 4.7.2 HTTP setup
Full Screen
/
Record
Capture Image
Record and captured files storage path settings
Open / Close this tool bar
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3 Playback Mode
Playback – Quick Function Icon
Press「
/
」button to Fast Rewind
Speed : 2x, 4x, 8x, 16x, 32x, 64x
Press「
/
」button to Fast Forward
Speed : 2x, 4x, 8x, 16x, 32x, 64x
Press「PLAY」/ 「 」button to Play/ Pause Playback
/
「
/ SLOW」slow playback
Speed : 1/2x, 1/4x, 1/8x, 1/16x
「
/
」stop playback
Speed : 1/2x, 1/4x, 1/8x, 1/16x
Playback channel by channel with snap shot display
Full screen display
Quad display
Zoom in video image
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4 PTZ Mode
PTZ – Remote Controller Control
/ SLOW
Move PTZ up.
/
/
/
Move PTZ down.
Move PTZ to the left.
Move PTZ to the right.
PTZ zoom-in.
ZOOM +
ZOOM -
FOCUS +
FOCUS -
IRIS +
PTZ zoom-out.
PTZ focus-in.
PTZ focus-out.
PTZ iris-open.
IRIS -
PTZ iris-close.
TOUR
Activate PTZ pre-set tour. *
To save a preset location
PRESET + NUMBER
PLAY + NUMBER
Press PRESET and a number key. DVR will save the current location.
To go to a preset location
Press PLAY and a number key. DVR will move to the preset location.
ZOOM
PIP
Set current PTZ location as the start of the line-scan. *
Set current PTZ location as the start of the line-scan. *
Activate line-scan. *
FREEZE
*：Different brands of PTZ protocol sometimes may not be 100% compatible with each other.
Therefore, these functions may not be applicable.
PTZ – Quick Function Icon
Exit PTZ Mode and back to the LIVE mode
Preset number N. (1~64)
Go to preset number N.
Set current PTZ location at preset number N.
[TOUR] icon, click to activate preset tour
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Same as [PIP]. Set current PTZ location as the starting point of the
line-scan.
Same as [FREEZE]. Activate line-scan.
Same as [ZOOM]. Set current PTZ location as the ending point of the
line-scan.
To move PTZ in 360°
PTZ zoom in or PTZ zoom out.
PTZ focus in or PTZ focus out.
PTZ IRIS open or PTZ IRIS closes.
Below functions needs support from specific PTZ. Please check the user manual of your PTZ
manufacturer for detail.
AUX 1~8. [AUTO] ＋「1」~ ＋「8」
[Backup] icon, click to customized function.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 INSTALLATION
3.1 System Configuration
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Hard Disk Installation
Step 1: Remove the 3 screws from DVR as cycled below (PIC 1).
(PIC 1)
Step 2: Remove the front cover from DVR as indicated by the arrow (PIC 2).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Place the HDD on the HDD plate and connect the power and the SATAcables (PIC 3).
(PIC 3)
Step 4: Screw the bottom of the DVR as indicated as cycled (PIC 4).
(PIC 4)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 BASIC OPERATION and MENU SETUP
4.1 Main Menu Setup
To enter the main menu and setup the DVR, please log-in account and enter user
password. The default password of the administrator is “123456”. Please refer to
“Account Setup” for related setup of other log-in users.
Main Menu – Mouse Control
(Right mouse click to enter Quick Setup Menu)
Switch between capital and small letters.
Switch between numbers and letters.
/
Press to cancel the setup, and re-choose the login account.
Delete the last character.
Enter to identify the password. It will enter the setup menu if the password
is verified.
Space key
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu – Remote Control ler and Front Pannel Control
(Click MENU button to enter Quick Setup Menu )
Switch to different options under one item
Switch to different items
MENU
Press to confirm setup (OK)
ESC
Press to cancel setup (CANCEL)
Enter the menu, or display virtual keyboard
ENTER
4.2 Record Setup
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Select STOP to stop recording or OVERWRITE to reuse the HDD when
HDD is full.
：
HDD FULL
[Stop] Stop Recording
：
[Overwrite] Start to overwrite beginning from the oldest data of HDD,
and continue to record.
OSD Position X
Set time stamp of OSD position X
Set time stamp of OSD position Y
OSD position time stamp setup
OSD Position Y
OSD Position Setup
Information stored within the HDD is preserved for only a specified length
of time.
Video Preservation (Hours)
Quality & Frame Rate
Setup…
Setup the quality and frame rate for each channel under normal
recording and event recording type.
Item
Description
View Normal / View Event
Setup resolution, quality and FPS separately for different record type.
Check/ Uncheck the box will enable/ disable recording of that channel.
Choose record resolution, this value will be used by each channel.
Choose from Below Basic / Basic/ Normal/ High/ Highest.
Choose recording frame rate (1~30).
No.
Resolution
Quality
FPS
The maximum recording frames available by the average distribution of
each channel.
Auto
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3 Event Setup
Item
Description
Motion Setup
Sensor Setup
Enter to set up motion detection
Enter to set up sensor detection
4.3.1 Motion Setup
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Alarm Duration(Seconds)
Alarm duration time (1~60 seconds).
Check the box to Enable/ Disable popup screen function for all channels.
When motion is detected in LIVE mode, the detected channel image will
popup in full screen display.
Motion Popup
Enable
Sensitivity
Check the box to Enable/ Disable motion detection for each channel.
Drag the bar or press ◀ ▶ to set up Sensitivity from value 0 to 10 for each
channel. The lower value you set the higher sensitivity it will be
Enter to setup motion detection area
Motion Area Setup
4.3.1.1 Motion Area Setup
There are partitions in motion detection area. Under initializing status, motion
detection area is in the entire screen. Red colored area is undetected; yet the
detected area is transparent.
Item
Description
Select to mask the mouse selected area.
Mask Mouse Selection
All Area Detection
Mask All Area
Continue
Select all the images as motion detection area.
Cancel all motion detection images on the screen.
Continue setup.
Exit & Save
Save setup and exit setup page.
Exit & Discard
Cancel setup and exit setup page.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4.3.2 Sensor Setup
Item
Description
Alarm Duration(Seconds)
Sensor Popup
Alarm duration time (1~60 seconds).
Check the box to Enable/Disable popup screen function for all channels.
When Sensor is detected in LIVE mode, the detected channel image will
pop up in full screen display.
Sensor Polarity
Click or press ▼ to select between HIGH/ LOW voltage for triggering
sensor detection or OFF to turn off polarity for each channel
Low Polarity：Sensor has not been triggered. When connected, sensor
will be turned on (N.O.→N.C.).
High Polarity：Sensor has been triggered. When connected, sensor
status will be turned off (N.C.→N.O.).
Off：Sensor is deactivated, and will not be turned on/off.
Set all sensors polarity to off.
All off
All Low
All High
Set all sensors polarity to low level.
Set all sensors polarity to high level.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
4.4 Schedule Setup
Apart from manual recording, you can also setup the recording time by weeks and
schedule recordings include: normal, motion detection, and sensor detection.
Item
Description
Click or press ▼ to select Page. Each page provides 10 schedules for
setup. 5 pages in total.
Page
Holiday Setup
Enter to setup holiday, maximum up to 50 days.
View Normal/ Motion / Sensor Setup.
View Event Setup
4.4.1 Schdule Record Setup
Click on the time icon on the left side. The setup menu will be displayed. You can have
detail setup by dates, time and event.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Enables schedule recording according to the time
schedule (shown below).
Enable Schedule Record
Enables schedule motion detection recording
according to the time schedule (shown below).
Enables schedule sensor trigger recording according to
the time schedule (shown below).
Enable Schedule Motion Detect
Enable Schedule Sensor Trigger
4.4.2 Holiday Setup
Since holidays are different between countries and regions, you can setup the holiday of
your location accordingly (Maximum Setup: 50).
4.5 Camera Setup
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Mask
Check the box to Enable/ Disable mask function for LIVE mode
Drag the white bar or press ◀ ▶ to adjust Sharpness of your camera from
value 0 to 15. The default value is 1.
Drag the white bar or press ◀ ▶ to adjust Brightness of your camera from
value 0 to 255. The default value is 128.
Sharpness
Brightness
Contrast
Drag the white bar or press ◀ ▶ to adjust Contrast of your camera from
value 0 to 255. The default value is 100.
Drag the white bar or press ◀ ▶ to adjust Chroma (U) of your camera from
value 0 to 255. The default value is 150.
Drag the white bar or press ◀ ▶ to adjust Chroma (V) of your camera from
value 0 to 255. The default value is 150.
Drag the white bar or press ◀ ▶ to adjust Hue of your camera from value 0 to
255. The default value is 150. (This function is ineffective in PAL system).
Set up name of each channel.
Chroma (U)
Chroma (V)
Hue
Name
Volume
Select to adjust audio volume under LIVE mode and recording mode.
4.6 Account Setup
The Account Setup menu is used to provide role-based permission independently for
each user (maximum of 4 users) to access the DVR over network. The default admin
account is [admin] and password is “123456”.
Item
Description
No.
User Name
Check to activate the user’s account.
Edit the user name.
Enter to set up password for each user.
Enter to setup Permissions for each user.
Change the ICON with a selected BMP file.
Enter to change administrator’s password.
Password
Permissions
Change
Change Admin Password
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4.6.1 Permission Setup
The Account Setup is set to provide individual user (maximum of 4 users) role-based
permissions, including access to Setup menu, Network operation, PTZ function,
Playback, Utility, Backup and Mask on specific channels while playing back.
4.7 Network Setup
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Setup mode for network connection: ADSL、DHCP、LAN.
Connect type
HTTP Setup
DDNS Setup
Mail Setup
Enter to set up HTTP for remote access into DVR.
Enter to Enable/ Disable DDNS function and set up.
Enter to Enable/ Disable Email notification and setup.
4.7.1 Networking Setup
The DVR supports DHCP, LAN and ADSL access for network connection.
4.7.1.1 DHCP
If the DHCP option is used for DVR network connection, an IP address is assigned by
the DHCP server automatically.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7.1.2 LAN
Select LAN for network connection, the following information is required.
Item
Description
IP Address
Subnet Mask
Gateway
Enter IP address provided by ISP
Enter IP address of Subnet Mask provided by ISP
Enter IP address of Gate way provided by ISP
Enter DNS address provided by ISP. (Note: The correct DNS address
must be entered for DDNS function).
DNS
22
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7.1.3 ADSL
Select ADSL for network connection, the following information is required.
Item
Description
User Name
Password
Enter user name provided by ISP
Enter password provided by ISP
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7.2 HTTP Setup
Item
Description
Check to enable HTTP server. Users can remotely access into the DVR
over the network if the HTTP function is activated.
Enable HTTP Server
Port
Enter a valid port value from 1 up to 65535. The default value is 80.
Quality and Frame Rate Setup for Network Transmission
Check to activate the transmission of each camera.
No.
Choose from Below Basic / Basic/ Normal/ High/ Highest.
Quality
FPS
Choose recording frame rate (1~30FPS).
The maximum recording frames available by the average distribution of
each channel (totally 60FPS).
Auto
This video streaming is used for network transmission; setting is LQ (low quality). Under a low bandwidth
capacity, this stream can send out small picture and keep a good video quality and smooth display rate. If
the bandwidth is large enough, it can be adjusted to HQ (high quality). Thus, the network streaming will be
switched to the condition which this DVR is recording. Therefore, a larger video image can be sent to
remote site.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
4.7.3 DDNS Setup
Item
Description
Check/ Uncheck to Enable/ Disable DDNS function.
Select the DDNS Server wanted.
Enter the registered hostname.
Enter user name.
Enable DDNS
DDNS Server
Host Name
User Name
Password
Enter password.
4.7.4 Mail Setup
25
Download from Www.Somanuals.com. All Manuals Search And Download.
E-mail can be used as a form of notification when an event occurs (VLOSS, MOTION,
and SENSOR).
Item
Enable E-mail Notification
SMTP Server
Description
Check the box to enable/disable E-mail Notification function.
Enter to set up SMTP Server name.
User Name
Enter to set up User Name.
Password
Enter to set up Password.
Sender E-mail
Enter to set up e-mail address of sender.
Enter to select events to send out E-mail notifications when below
circumstances happen: Motion, Sensor and Vloss (Video Loss).
Enter to set up e-mail addresses for up to 10 receivers individually.
Trigger Event
Receiver E-mail
26
Download from Www.Somanuals.com. All Manuals Search And Download.
4.8 PTZ & RS-485 Setup
The DVR allows users to control PTZ functions of your camera. To enable PTZ function,
the 485 cable should be connected to the RS-485 port of DVR.
Item
Enable PTZ
Protocol
Description
Click the box to Enable/Disable PTZ function for each channel.
Set up the protocol of PTZ cam.
PTZ ID
Click or press ◀ ▶ to set up PTZ ID. The valid ID value is from 1 to 64.
Select Baud Rate for PTZ from 2400、4800、9600 、19200
Baud Rate
RS-485 ID
RS-485 Baud Rate
Keyboard
Reserved.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9 System Setup
Item
Description
DVR Name
DVR Location
Language
The name of DVR will be shown when users login from remote access.
The location of DVR will be shown when users login from remote access
Click or press ▼ to select OSD language.
Auto-Seq Interval
( Seconds)
Click or press ◀ ▶ to set up duration time in seconds for the interval
between channels under Auto-Seq mode.
Remote ID
Preserved Function.
After one minute without any action, the DVR will switch to LIVE mode
automatically. Auto lock can function differently according to the setting below.
Button automatically Auto Lock: The front panel function keys are ineffective
only until using the mouse and please re-enter the password again.
Function
Auto Lock
Auto Logout
Key Lock
Setting
Key lock
○
○
×
○
×
×
Key unlock
Disable
Display Setup
Date/Time Setup
Buzzer & Relay Setup
Spot Setup
Enter to set up Display
Enter to set up Date/Time
Enter to set up Buzzer & Relay
Enter to set up Spot
28
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9.1 Display Setup
Item
Description
Auto-Seq Interval
( Seconds)
Click or press ◀ ▶ to set up duration time in seconds for the interval
between channels under Auto-Seq mode (1~999 seconds).
Show OSD
Show DVR Status
Show Date/Time
Show Channel Name
CRT
Turn On / Off OSD display
Turn On / Off DVR illustration and record status display
Turn On / Off date and time display
Turn On / Off channel name display
Make the display more suitable for CRT monitor.
Set up the color of border in LIVE , PLAYBACK mode.（black, dark grey,
light grey, and white）
Border Color
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9.2 Date/ Time Setup
Item
Description
Hour Format
12HOURS/ 24HOURS
Date Format
MM-DD-YY/DD-MM-YY/YY-MM-DD
Date/Time Position
Change Date & Time
Time Zone Setup
Internet Time Setup
Choose the position of Time and Date display
Setup time and date of DVR
Set up GMT and Daylight Saving Time.
Setup automatic synchronization with internet server
4.9.2.1 Change Date & Time
Users are allowed to setup date and time of the DVR.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
4.9.2.2 Time Zone Setup
In time zone setup, users can change the time zone and activate Daylight Saving Time
function according to your DVR location.
Item
Description
Enter to modify GMT from GMT- 13 to GMT+ 13
Turn On/ Off Daylight Saving Time
Select Time Zone
Daylight Saving Time
4.9.2.3 Internet Time Setup
Synchronize your DVR time with internet time server.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Check to enable DVR automatic synchronization function. Select this
option to enable the function, DVR will automatically synchronize the
time upon rebooting or by every 24 hours after booting.
Date and Time show on DVR will immediately correspond with those in
internet server.
Automatic Synchronization
Update Now
4.9.3 Device Setup
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Item
Description
Mouse Speed
Adjust the mouse moving speed
Buzzer & Relay Setup
Key Tone
Enable/ Disable keystrokes.
Enable/ Disable buzzer operation when the alarm is triggered for HDD
error, sensor, motion and vloss (Video Loss).
ALARM BUZZER
Enable/ Disable the signal to be sent to the RELAY OUT blocks when the
alarm is triggered for HDD error, sensor, motion and vloss.
ALARM RELAY
4.9.4 Spot Setup
The DVR has two modes of video output; one is the main video output, the other is spot
video output. SPOT setup is for controlling orders of channels that the system cycles
through in SPOT mode. User can monitor every channel in the SPOT mode.
Item
Description
The duration interval time between channels is in seconds
under SPOT mode (1~999 seconds).
Auto-Seq. Interval (Seconds)
Skip Video Loss Channel
Channels
Whether to skip channels without video signal.
Select which channels will be displayed in the sequence.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
4.10 Utility Setup
Item
Description
Select to enter hard disk initialization menu. Please stop recording
before entering this menu. Enter the menu, system will show all the
data (model/ volume) of HDD that is installed in the DVR. Check the HDD
you’d like to initialize, then press “Start”. HDD initialization is successful
when the status shows “Succeed”.
HDD Initialization
Clean up all data on USB. Enter USB initialization and press “YES” to clean
up all data on your USB. The initialization is done when it shows “Succeed”.
USB Initialization
System Recovery
Reset System Events
Restore system default values.
Reset all the recording events in the DVR.
Copy configuration to a USB device. There will be a file named
“sdvr.config” on your USB.
Copy Setup to USB
Download Setup from USB
Download configuration from a USB device into DVR.
Upgrade DVR through USB.
Please stop recording and backup setup configuration before upgrading.
System will reboot automatically when the upgrade is completed.
Upgrade
NOTE！ DO NOT TURN OFF POWER OR UNPLUG USB DEVICE DURING THE UPGRADE as it
may cause incomplete firmware upgrade and damage to the DVR.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
4.11 Diagnostic
Item
Description
Version
The current firmware version of DVR
The connected IP address of DVR. If disconnected from network, the
screen will display” NETWORK DISCONNECT”.
MAC Address of DVR
IP Address
MAC Address
HDD Volume
HDD Used Rate
The capacity of HDD
Percentage of space used on HDD.
Shows HDD status. USING means the HDD is now used for recording.
GOOD/ BAD means the HDD has a known/ unknown format for the
DVR. (Note: Please initialize your newly-installed HDD before using it,
otherwise it can be recognized as BAD by the DVR).
HDD Status
Format Time
The latest format time of HDD
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 SEARCH & BACKUP
5.1 Search Setup
Item
Description
Event Search
Time Search
Press to enter event search menu.
Press to enter time search menu.
5.1.1 Event Search
36
Download from Www.Somanuals.com. All Manuals Search And Download.
The DVR automatically records events with type, time and channel information included.
If there is recording data for an event, a yellow signal icon will be shown on the left
side of time information. Rest your cursor under the line and press “enter”, or left click
your mouse to playback the recording data.
Item
Criteria
Page
Description
Setup conditions of the event search function
Convert pages of events
Date/Time
Date/ time when the event occurred.
Event type, defined as following:
Motion
: Motion Detected
: Sensor Detected
: Video Loss
Sensor
Video Loss
Remote Login
Remote Logout
Power On
HDD Full
: User log-in over the network
: User log-out over the network
: System Rebooting
: HDD is FULL
Event Type
HDD Error
Reboot
: HDD is error
: System reboot
Channel
The channel where the event occurred.
5.1.1.1 Criteria Setup for Event Search
37
Download from Www.Somanuals.com. All Manuals Search And Download.
The amount of events can be numerous. Therefore, you can facilitate event sorting by
setting up “criteria”. Setup “start time” and “end time” for each event search, then the
search result will be limited to this specific period of time. Only events and channels that
are ꢁ checked will be sorted in event search as well.
5.1.2 Time Search
TIME SEARCH, you can search for a specific time of the recording data to playback.
Dates with recording are shown by data marked with a red square [ □ ]. System will
start playing back according to the date that you’ve selected. Calendar will be shown
by using mouse to click on “year” and “month”.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Click “date” to display recording time of that specific date with time bar. You can
change time (hour/ minute/ second) or click on a specific time of time bar by mouse
then press “YES”. DVR will playback the selected recording data.
5.2 Backup Setup
User can back-up any segment of recorded data in a specified time frame. To do so,
connect a USB flash driver to the DVR. The format of backup file is IRF file and a file
player is also saved in the USB driver.
Item
From
Description
Backup file starting time
Backup file ending time
To
Device
Select USB as the backup device (From remote site, the device will be PC.)
The available space in your backup device
Free Space
Refresh
Required Space
Calculate
Recalculate the available space of backup device
Calculate the required size of backup file
Calculate the size of backup file
Start backup operation. Be sure to calculate the size of backup file BEFORE
operating backup.
Start
NOTE！ Do not unplug the USB device or turn off the DVR during the backup process to avoid
unrecoverable error. When backup is completed, you need to re-plug in order to insure
proper function.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6 SPECIFICATION
I/O
Video System
Video Input
NTSC / PAL switch
4CH BNC
1.0 Vp-p Composite, 75 Ohm Balanced
1CH BNC
Video Input Level
Video Output
SPOT Output
VGA Output
Audio Input
1CH BNC
1024x768
1CH RCA
Audio Input Level
Audio Output
Audio Backup
Sensor
0.5~1.4 Vp-p @ 20K Ohm
1CH RCA
YES
4 input / 1 output
Pan / Tilt / Zoom camera
2 ports
RS-485
USB Port
Mouse
USB mouse
IR Remote Controller
YES
STORAGE
SATA HDD x1
(Max. 1TB each)
HDD Support
OSD
Display Division
1,4
GUI
Title
YES
14 characters
PIP
YES
2X ~ 8X
Digital Zoom
RECORDING
Video Compression
Audio Compression
H.264
ADPCM
720x480, 720x240, 360x240 (NTSC)
720x576, 720x288, 360x288 (PAL)
60, 120, 120 (NTSC)
Resolution
Frame Rate
50, 100, 100 (PAL)
Quality
Highest, High, Normal, Basic, Below Basic
Manual, Schedule, Event(motion detection/sensor)
16MB (10 sec)
Record Mode
Pre-Alarm Recording
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Post-Alarm
Recording
1-60 sec
Motion Detection
22X18 (sensitivity 0~10)
PLAYBACK
Search Mode
Playback Speed
Backup Mode
Time, Event
fast forward/backward 2X/4X/8X/16X/32X/64X
slow forward/backward 1/2X,1/4X,1/8X,1/16X
play/pause
USB flash driver / Network
NETWORK
Network
Compression
Software
H.264
YES
Internet Explorer
CMS
YES
YES
3G Mobile Phone
Network Users
Remote Notification
Service
Support
5
Email message
TCP/IP, SMTP, DHCP, DDNS, PPPoE
OTHER
Daylight Saving
Password
YES
5 users including 1 administrator
user authority selectable
Event List
Log List
10000
10000
software watchdog
Auto-Reboot
Watchdog
Recovery
Key Lock
YES
Firmware Update
Dimension
Power Source
Operating
USB device
188mm (W) x 54mm (H) x 209mm (D)
DC12V
30 ~ 80% RH, 5℃ ~ 40℃ (41℉ ~ 104℉)
Environment
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7 NETWORK SURVEILLANCE
7.1 Remote Connection
Step 1：Enter the IP address of the DVR in the IE browser.
Provides two different ways of DVR connection, one is the use the Internet Explorer; the
other to download and install the software to the PC.
Step 2: A window will pop-up. Please enter the user name and password. Default user
name is admin and password is 123456. Other related setup about user
account and password, please refer to section on “Account Setup“.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: You’ve logged into the DVR
Internet Explorer
Software Application
43
Download from Www.Somanuals.com. All Manuals Search And Download.
|