Instructions for I40XT
GameSpy Digital Camera
ON / OFF / AIM SWITCH
Used for turning On, turning Off, or Aiming the camera. When in AIM position the
red LED light on the front of the camera will illuminate. To help find the center field
of view for the camera, stand out in front of the camera and move left or right as you
observe the AIM LED - as you walk away from direct center the LED light will be
less bright. As you walk towards center the LED will appear brighter.
THANK YOU for your purchase of the Model I40XT GameSpy Digital Camera.
Please read this booklet before using the unit. If you should have any questions
about this product or any other Moultrie product, please contact us using the
information on the back of this sheet. Please register your camera at
MODE BUTTON
The Mode Button selects the three modes of the camera -Auto, Camera Setup Menu, and
Cellular Setup Menu. When either of the Menu modes are selected, the UP and DOWN
buttons navigate through the menu options. The Mode Button is also used to wake-up
the camera and turn on the display when the camera is in a power saving mode
.
MENU NAVIGATION BUTTONS
LED Flash
The menu navigation buttons are used to navigate around the LCD display.
UP/DOWN moves to the next menu option, OK selects the menu option to be
changed. The LEFT/RIGHT buttons select the parameter field to be changed. When a
parameter field is selected it will flash on the LCD display. When a parameter field is
selected, the UP/DOWN buttons navigate through the options for the field and the OK
button selects the parameter value indicated on the display. The OK button is also used
to manually take a picture.
Motion Sensor
Camera Lens
SD MEMORY CARD SLOT
Accepts up to a 16GB SD Card for photo storage. Note: An SD Card must be installed
for the camera to operate.
LCD Display
ON/OFF/AIM
Battery Compartment
Battery Compartment
USB PORT
Download still pictures and video onto your computer by connecting provided cable
Mode Button Navigation Buttons
USB Port
POWERPANEL PORT
Accepts the Moultrie PowerPanel accessory (sold separately) only. Refer to
TV Out
SD Card Slot
TV OUT JACK
View still pictures and videos on your TV by connecting a 2.5mm video cable
(sold separately).
Aux Power
I40XT GameSpy Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
I40XT GameSpy Digital Camera
The menu navigation buttons are used to navigate through the available settings.
The UP or DOWN buttons move to the next menu item, OK selects the item to be
changed.
Multi Shot Count (default 1-Shot) -When the GameSpy Camera is configured
for STILL in the Capture Mode screen, the camera can take 1, 2, or 3 pictures
each time an animal is detected. There is an approximate 4 second delay between
pictures based on battery strength. To change the number of pictures taken, press
the OK button on the MULTI IMAGE screen to edit the setting and the UP or
DOWN button to change to the desired setting.
Setup Date/Time - press the OK button to select the Month and use the UP or
DOWN buttons to modify. Press the LEFT or RIGHT button to move to the
next field. Press the OK button again to save your selections. The Time and
Date is retained between battery changes. Time is not automatically adjusted for
daylight savings.
Video Resolution (default low) -Video resolution can be set to LOW or HIGH.
The higher the quality of the video, the more memory it consumes. However,
higher quality videos have higher resolution. Press the OK button on the VIDEO
RESOLUTION screen to edit the setting and the UP or DOWN button to change
to the desired setting. Refer to SPECIFICATIONS section of this document for
details on number of images stored based on Photo Quality.
Capture Mode (default Trail Cam) - press the OK button on the CAPTURE
MODE screen to edit the settings and the UP or DOWN button to change to the
desired setting. Trail Cam (photos taken based on animal detection), Plot Cam
(photos taken at timer intervals), Hybrid Cam and Video are described in the
MODES OF OPERATION section of the manual.
CAPTURE MODE
TRAIL CAM
Video Length (default 5 seconds) -When the GameSpy Camera is configured for
VIDEO in the Capture Mode screen, the camera will record video for a designated
amount of time each time an animal is detected. To change the amount of time
recorded, press the OK button on the VIDEO LENGTH screen to edit the setting
and the UP or DOWN button to change to the desired setting (5 , 15 or 30
seconds). The maximum video length is 10 seconds at night.
Photo Quality (default High) -The higher the quality of the photo/image the
more memory it consumes. However, higher quality images have higher
resolution which results in clearer images -especially - when zooming in. There
are four photo/image quality settings -LOW, MEDIUM, HIGH and
ENHANCED. Press the OK button on the PHOTO QUALITY screen to edit
the setting and the UP or DOWN button to change to the desired setting. Refer
to SPECIFICATIONS section of this document for details on number of images
stored based on Photo Quality.
Camera Name (default MYCAMERA) - the Camera Name is printed on the
photos and provides a point of reference when multiple cameras are used. To
change the Camera Name, press the OK button on the CAMERA ID screen to
modify the first character. Press the UP or DOWN button to select the desired
character (A to Z, 0 to 9, dash or space). Press LEFT or RIGHT button to move to
the next character.
Photo Delay (default 1 minute) -The photo delay determines the number of
minutes between pictures when an animal is detected and remains in range. To
change the PHOTO DELAY, press the OK button on the IMAGE DELAY
screen to edit the setting and the UP or DOWN button to change to the desired
setting. Photo Delays can be set to 15 seconds, 30 seconds, 1, 5 10, 30 and 60
minutes.
Temperature (default Fahrenheit) -the temperature is printed on the photo and
can be in degrees Fahrenheit or Celsius. To change the temperature units, press
the OK button on the TEMPERATURE screen and the UP or DOWN button to
change to the desired units.
FAHRENHEIT
I40XT GameSpy Digital Camera
I40XT GameSpy Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
VI
IR Test (default off) - The IR Test function can be turned ON to test the sensing
range of the camera. With IR Aim ON the LED on the front of the camera will
flash each time the camera detects presence; however, a picture will not be taken.
Resolution
5.0MP
Photo Quality
LOW
744 x 416
MEDIUM
HIGH
ENHANCED
Video
HIGH
LOW
1480 x 832 (1.3MP)
2368 x 1328 (3.2 MP)
2984 x 1680
Info Strip (default on) -When the Info Strip is turned ON, the information strip,
as described in the Advanced Setup section of this manual, is printed on the
photos. When the Info Strip is turned OFF, the photo contains no information
strip. Press OK on the INFO STRIP screen. Press UP or DOWN button to change
the value. Press Enter again to select value.
744 x 416
376 x 208
Approximate photos stored 1GB SD card
LOW
MEDIUM
HIGH
ENHANCED
9999
2809
1100
690
Plot Frequency (default 15 seconds) - When Plot Mode functionality is enabled,
the camera will take photos at either 10, 15, 30, or 60 second intervals. To change
photo Frequency, press the OK button on the Plot Frequency screen and press UP
Approximate video time stored 1GB SD card
HIGH
LOW
or DOWN to select the interval.
PLOT FREQUENCY
20
60
15 secs
Optional SD Memory Card
Optical Field of View
Batteries
32 GB Max
55 degrees
6 Alkaline C cell
Plot Duration (default 3 hour) - When Plot Mode functionality is enabled, the
camera will capture interval photos for the Plot Duration number of hours after
dawn or dusk. The Plot Duration number of hours can be set to 1, 2, 3, 4 hours,
or all day.
Approximate Flash Range
60 feet
PLOT DURATION
3 HRS
Default Settings (default no) -To restore all the settings back to the factory
default, press the OK button on the DEFAULT SETTINGS screen. Press the UP
or DOWN button to change the value to YES and OK to activate.
MFH-I40XT
Delete All? (default no) -To remove all the images from the internal memory or
on the SD card, press the ENTER button on the DELETE ALL screen. Press the
UP/DOWN button to change the value to YES and SELECT to delete all photos.
DELETE ALL?
Flash (default on) -To modify the Flash setting, press the OK button on the
FLASH screen. Press UP or DOWN to switch between FLASH ON and FLASH
OFF and press OK again to select desired setting.
I40XT GameSpy Digital Camera
I40XT GameSpy Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
ADVANCED SETUP
VI
PLOTSTALKER SOFTWARE INTRO
A
INTRODUCTION
In time-lapse photography a series
of still photos are taken at regular
time intervals. The PlotStalker
Software allows you to load the
time lapse file that was captured
from your Moultrie Game Camera
and scroll backwards and forwards
through your photos, single step,
search for activity in a designated
area, and save the files.
SYSTEM REQUIREMENTS
Computer: Intel® Pentium® 4 or AMD Athlon® 64 processor or above; 1GB
RAM minimum; 100 MB hard disk space minimum.
>
Operating System: Microsoft® Windows® 32 bit - XP with Service Pack 2 or
later; Windows Vista® Home Premium, Business, Ultimate, or Enterprise with
Service Pack 1; or Windows 7
>
VIEWING PICTURES ON COMPUTER VIA USB
1. Plug provided USB cable into the USB port on your
Windows 7/Vista/XP computer.
2. Plug other end of USB cable into the camera's USB port.
3. To access JPG pictures and AVI movie files, navigate to "My Computer" and
double click the "Moultrie CAM" drive. Picture files will be stored In the
DCIM directory; video files are located in the DCIM directory.
4. To exit USB mode, follow Window's instructions for properly disconnecting
a removable drive and then unplug
SOFTWARE INSTALLATION
>
Insert the PlotStalker CD into your computer and follow on-screen instructions.
LOADING PLOT FILES
Using standard Microsoft utilities (ex. File Explorer – My Computer),
copy the PlotFiles (extension is .MLT) from the PLOT directory on the
SD card to the hard disk drive in your computer. Note the location stored
on the hard disk drive.
1
2
3
Open the PlotStalker software application from the Windows Start Button
menu. Once in the PlotStalker software, click on the File Button
Browse to the location in which you have saved the Plot file(s)
(.MLT) in step 1 above, select the file of interest and click Open.
2/9/2010
BEGIN/END
Goes to the first or last photo in the Plot File.
FRAME BY FRAME SEARCH
Individually step forward or backward through each photo.
REWIND/PAUSE/PLAY
Play photos in sequence, pause, or play the photos in reverse order.
These functions simulate a video and are useful for manually searching
for changes in the photos. When a sequence is being played, press
fast-forward or fast-rewind multiple times to increase speed. (1x-5x)
PlotStalker Software
PlotStalker Software
Download from Www.Somanuals.com. All Manuals Search And Download.
PLOTSTALKER ACTIVITY SEARCH
B
PLOTSTALKER SAVE FILE
C
ACTIVITY SEARCH
The Search Feature will scan through your photos and automatically
look for changes in regions that you identify in Setup.
SAVING FILES OVERVIEW
Use the Save File features of the PlotStalker
software to create a single photo, reduce the
overall size of the .mlt file, exclude unwanted
photos in the front, or create a video that can
be viewed using a standard media player.
In search mode, the PlotStalker software scans through the .mlt photo
file, stops on a photo when changes are found in your identified region,
and then highlights the changes in blue. You can click anywhere on the
screen to remove the blue highlights.
EXPORTING AN IMAGE/PHOTO
ACTIVITY SEARCH SETUP
Click the Settings button to activate
the Region and Sensitivity settings
for the Activity Search
1
On the main screen, choose a starting image/
photo (frame) by using the scroll bar on the
bottom of the display or the frame-by-frame
search feature.
2
Press the SAVE button
3
4
5
Select the Current Image (*.jpg) radio button
Press Change... to enter the directory and filename to save the image
Press Export to save the file
DEFINE SEARCH REGION
Provides the ability to search for
changes in the photo in a specific
region rather than the entire photo.
EXPORTING MLT FILE
Select the appropriate 50, 100, or 150 video clip radio button.
This will create a MLT format file from the starting frame plus the
next 50, 100, or 150 frames.
1
2
3
4
Select the Change button to select the desired location to save the export file.
Enter the directory and filename to save the file
Select the Export button to save the file. These files are viewable with
Plot Stalker Software.
Click on the Set Motion Search Area Button.
1
2
Use the mouse ro select and drag the red outline around the area you want to
search for movement. This allows you to focus on a very precise area if
required.
EXPORTING WMV FILE
1
Select the appropriate 50, 100, or 150 video clip radio button. This will create
a .wmv format file of the starting frame plus the next 50, 100, or 150 frames.
Select the Change button to select the desired location to save the export file.
Enter the directory and filename to save the file
Select the Export button to save the file. The program will convert the images
to video based on the chosen settings. The .wmv file can be viewed using a
standard media player.
3
Click OK button on the Settings Popup window to confirm your settings and
exit the menu.
2
3
4
SENSITIVITY
Set to High, Medium or Low - This sets the level of pixel change the program
1
will detect. Note; a pixel change will occur with a color, intensity, lighting or
movement so this setting is critical to obtain the desired results.
DEFAULT SETTINGS
Click on Default button to return to the default values for Search Area and
Sensitivity settings
1
PlotStalker Software
Download from Www.Somanuals.com. All Manuals Search And Download.
12092010R1/ MFH-I40XT
|