Miller Electric Welding System Big 40 Diesel User Manual

®
Issued April 2008 • Index No. ED/8.5  
Diesel Engine-Driven  
Welder/Generator  
Big 40 Diesel  
Heavy Industrial  
Applications  
Processes  
Output Range  
CC:  
DC Stick 55500 A  
CC/CV: DC Stick 40550 A  
AC TIG 15375 A  
DC/TIG 55500 A  
DC/TIG 20350 A  
MIG/FCAW 1440 V  
CC and CC/CV Models  
Stick (SMAW)  
Petro Chemical Piping  
Structural Steel Work  
Maintenance and Repair  
TIG (GTAW)  
Air Carbon Arc (CAC-A)  
Cutting and Gouging  
(Rated) 5/16 (7.9 mm) carbons  
(Capable) 3/8 (9.5 mm) carbons  
Stud Welding  
Generator Output Rated at 104˚F (40˚C)  
5500 Watts Peak4000 Watts Continuous  
15,000 Watts 3-Phase / 12,000 Watts 1-Phase  
(Deluxe Model)  
Quick  
Specs  
CC/CV Model Only  
MIG (GMAW)  
Flux Cored (FCAW)  
AC TIG (Deluxe Model)  
Accu-RatedNot Inflated  
Generator Power  
®
CATERPILLAR industrial engine designed  
to operate over 10,000 hours before the  
first basic overhaul. Backed by worldwide  
CAT support and service.  
The Power of Blue.  
AC TIG weld aluminum with deluxe model.  
The most AC weld output on any engine  
drive. (High-frequency unit required.)  
NEW! Meter maintenance displays.  
• Hour meter function  
• Oil change interval  
• High coolant temperature and  
Improved!  
Maintenance Displays!  
Silencedonly 65 dB (90 Lwa) at idle.  
73.8 dB at 23 ft (98.7 Lwa) maximum  
output. Improves work site communications.  
low oil pressure shutdowns  
• Low fuel shutdown — engine  
shuts downs before system runs  
out of fuel, making restarts easy.  
Automatic idle saves fuel and prolongs  
engine life along with reducing the  
sound level.  
Simplified control panel provides  
easy set-up with fewer controls—  
less training is required.  
Quick and easy maintenance with  
single-side access to oil level check,  
oil fill, oil filter, fuel filter and air cleaner.  
More welding amperage!  
400 amps at 100% Duty Cycle  
450 amps at 60% Duty Cycle  
500 amps at 40% Duty Cycle  
Enclosed base and case protects  
internal components from corrosive  
environments and reduces sound levels.  
Remote toolless oil drain that allows oil to  
be drained without getting under the engine  
and reduces the chance of oil spillage.  
Engine gauges indicate engine oil  
pressure, and coolant temperature  
(standard on all models).  
Hot Startprovides positive Stick electrode  
starts to make it easy to start all types of  
electrodes, and works great for bead tie-ins.  
Arc-Drive makes welding easy.  
Automatically enhances Stick  
welding, especially on pipe, by  
focusing the arc and preventing  
the electrode from going out.  
Standard GFCI receptacle required  
on most job sites to protect  
operators from electrical hazards.  
CSA, IEC, and NEMA compliant for  
welders. Degree of protection  
provided by enclosure IP23.  
CC/CV Models: The Vaultultimate  
control board reliability. See page 4.  
Welder/generator is warranted for 3 years, parts and labor.  
The CATERPILLAR engine is warranted for 2 years by CATERPILLAR.  
Miller Electric Mfg. Co.  
An Illinois Tool Works Company  
1635 West Spencer Street  
Appleton, WI 54914 USA  
International Headquarters Web Site  
Phone: 920-735-4505  
USA FAX: 920-735-4134  
Canadian FAX: 920-735-4169  
International FAX: 920-735-4125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Big 40 Diesel CC/CV Specifications  
(Subject to change without notice.)  
Welding  
Weld Output  
Weld Output Rated  
at 104˚F (40˚C)  
Max. Open-  
Net Weight  
(without fuel)**  
Mode  
Range  
Circuit Voltage  
Generator Power Output Rated  
Dimensions*  
CC/DC  
20550 A  
400 A at 36 VDC (14.4 kW),  
100% Duty Cycle  
95  
Peak: 5000 watts  
Continuous: 4000 watts, 34/17 A,  
120/240 VAC, 60 Hz while welding  
H: 43 in  
1545 lb  
(701 kg)  
(1092 mm)  
W: 28-1/2 in  
(724 mm)  
D: 64-7/16 in  
(1637 mm)  
450 A at 38 VDC (17.1 kW),  
60% Duty Cycle  
56  
65  
CV/DC  
1440 V  
Deluxe Model Additional Power Plant:  
1-phase, 12 kW, 50 A, 120/240 VAC, 60 Hz; or  
3-phase, 15 kW, 36 A, 240 VAC, 60 Hz while  
not welding  
500 A at 34 VDC (17 kw),  
40% Duty Cycle  
CC/AC  
(Deluxe  
Model)  
15375 A  
300 A at 32 VAC (9.6 kW),  
100% Duty Cycle  
335 A at 33 V (11.1 kW),  
60% Duty Cycle  
375 A at 35 V (13.1 kW),  
40% Duty Cycle  
NEMA EWI (ANSI C87.1) Class (1) output ratings. *Additional 7 in (178 mm) to top of exhaust. **Additional 190 lb (86 kg) when fuel tank is full.  
®
Big 40 Diesel CC/CV Control Panel  
1
9
Additional Features  
A multi-colored process selector control  
allows quick and easy process changes  
without having to use multiple switches.  
2
3
4
10  
11  
12  
Heavy-Duty Design — The Vault design  
provides enhanced arc characteristics that  
include more dig in the Stick mode with  
smoother and lower amperage in the TIG  
mode. Along with the superior welding  
performance, the Vault provides the ultimate  
reliability in the harshest of environments.  
13  
14  
5
6
Process/Contactor Selector Switch  
5
15  
16  
17  
7
8
18  
A hermetically-sealed vault protects Miller  
control boards from dust, moisture, and  
tough environmental elements. Extreme  
conditions will not cause the output to  
change, eliminating the need to periodically  
turn up the heat.  
19  
1. DC Ammeter*  
2. DC Voltmeter*  
3. Amperage/Voltage Adjust Control  
4. Ampere Range Switch  
5. Amperage/Voltage Adjust Switch and Remote  
Amperage/Voltage Adjust Receptacle  
6. Process/Contactor Selector Switch  
7. 120 VAC, 20 A GFCI Duplex Receptacle  
8. 240 VAC, 30A TwistLock Receptacle  
(NEMA L6-30)  
10. Engine Oil Pressure Gauge  
11. Battery Voltmeter*  
12. Engine Coolant Temperature Gauge  
13. Engine Control Switch  
14. Starting Aid Switch  
15. 3-Phase Power Generator Option*  
16. Strain Relief*  
17. 50 A, 3-Phase Circuit Breaker  
18. 50 A, 120/240 V Receptacle  
(NEMA 14-50)*  
15,000 watt generator option for stand-by  
power generation adds 15 kW, three-phase,  
240 volt power to CC/CV units. 12 kW,  
120/240 volt, single-phase power from a  
50 amp receptacle while not welding.  
9. Fuel Gauge/Hour Meter/Oil Change Interval/  
Engine Shutdown Indicator  
19. AC/DC Polarity Switch*  
*Optional on select models.  
®
Big 40 Diesel CC/CV Performance Data  
CC/CV VOLT/AMP CURVES  
STICK MODE  
CC/CV VOLT/AMP CURVES  
MIG MODE  
CC/CV VOLT/AMP CURVES  
TIG MODE  
CC/CV VOLT/AMP CURVES  
AC TIG MODE  
100  
80  
60  
40  
20  
0
100  
80  
60  
40  
20  
0
100  
100  
80  
Ranges  
Ranges  
Ranges  
55 – 350  
35 – 205  
25 – 105  
15 – 45  
Max  
155 – 450  
115 – 320  
75 – 195  
40 – 90  
60 – 365  
35 – 250  
25 – 155  
15 – 75  
80  
60  
40  
60  
MAX  
40  
20  
20  
0
MIN  
0
0
100 200 300 400 500 600 700 800 900 1000  
DC AMPERES  
0
100  
200  
300  
400  
500  
0
100 200 300 400 500 600 700 800 9001000  
DC AMPERES  
0
50 100 150 200 250 300 350 400 450 500  
AC AMPERES  
DC AMPERES  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Big 40 Diesel CC Options  
Weld Ammeter and Voltmeter Kit  
#195 131 Field  
Panel-mounted analog meters monitor  
Battery Voltage Gauge  
#195 454 Field  
Monitors battery charging circuit.  
welding output.  
Installation time: 35 minutes  
DC Polarity Reversing Switch Kit  
#043 942 Field  
Changes DC polarity without the use of tools.  
Installation time: 35 minutes  
Cold Weather Starting Aid Kit  
#195 056 Field  
Includes 120 V block heater.  
Note: All models come standard with glow plugs.  
®
Big 40 Diesel CC/CV Options  
Weld Ammeter and Voltmeter Kit  
#195 131 Field  
Panel-mounted analog meters monitor  
welding output. Deluxe model comes  
standard with weld meters.  
Installation time: 35 minutes  
Battery Voltmeter  
#195 454 Field  
Monitors battery charging circuit.  
Cold Weather Starting Aid Kit  
#195 056 Field  
Includes 120 V block heater.  
Note: All models come standard with glow plugs.  
AC/DC Polarity Reversing Switch Kit  
15,000 Watt Generator Plant  
12,000 Watts, 1-phase, 120/240 V  
15,000 Watts, 3-phase, 240 V  
The panel is protected by a 50 amp  
on/off circuit breaker. It includes a 50 A,  
1-phase receptacle and strain relief for  
direct hard-wiring. This power is only  
available while NOT welding. Comes  
standard with deluxe model.  
#195 095 Field  
+
Changes DC /AC/DC- without the use  
5
of tools. Deluxe model comes standard  
with AC/DC polarity switch.  
Installation time: 35 minutes  
Note: Available as factory option.  
See Ordering Information on back page.  
The Vault  
Superior Circuit Board Design  
offer a superior arc and multiple welding  
processes. Miller’s circuit board reliability isn’t  
a concern since all PRO 300 and Big Blue  
multiprocess industrial engine drives feature  
the Vault.  
Miller’s critical circuit boards are engineered  
to carry low power and low heat to reduce  
thermal stress and minimize expansion and  
contraction. In contrast, our competitor’s  
boards carry high power and high heat, making  
them more vulnerable to failure.  
Created out of two aluminum halves sealed  
with silicone, as well as watertight harness  
connections, the Vault provides a clean circuit  
board environment, protecting the electronics  
— and controlling output — in heavy industrial  
applications. No other competitor protects their  
electronics with a sealed vault, leaving critical  
“The Vault” Makes Upgrading to Miller CC/CV  
Units Worry-Free  
Concerns with circuit board reliability have  
resulted in some operators steering clear of  
CC/CV welder/generators — even though they  
circuit boards exposed to harsh elements that  
can disrupt the machine’s electronics, and  
therefore, its operation.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Genuine Miller Accessories  
(Continued)  
FA-1D Lockable Flame Arrestor  
Fuel Cap #043 947 Field  
Stick (SMAW) Welding  
Weld Leads  
#173 851 2/0, 350 A, 100% duty cycle,  
50 ft stinger, 50 ft work cable  
#043 952 2/0, 300 A, 100% duty cycle,  
100 ft stinger, 50 ft work cable  
Fuel cap can be padlocked to  
prevent vandalism. A built-in  
flame arrestor prevents flames or  
sparks from entering the fuel tank.  
Spark Arrestor  
Muffler Kit  
#195 012 Field  
SuitCase 8RC Wire Feeder #194 938  
Plasma Cutting  
SuitCase 12RC Wire Feeder #194 940  
Lightweight and flexible enough to run a  
variety of wires up to .062 in diameter.  
Comes standard with remote voltage  
control. See Lit. Index No. M/6.5.  
Prevents particles  
from leaving the muffler that could  
potentially start a fire. Mandatory when  
operating on California grasslands, brush,  
or forest-covered land, and in all National  
Forests. For other areas, check your state  
and local laws. Meets US Forest Service  
standard 5100-1B.  
MIG (GMAW)/Flux Cored (FCAW) Guns  
Miller produces a complete line of  
dependable MIG guns. See Lit. Index Nos.  
AY/15.0, AY/16.0 and AY/17.0.  
Spectrum® 375 X-TREME#907 303  
Spectrum® 375 X-TREMEwith X-CASE™  
#907 339 (not shown)  
See Lit. Index No. PC/9.2.  
Spectrum® 625 #907 058  
See Lit. Index No. PC/9.5.  
Vandalism Lockout Kit  
#195 118 Field  
Spoolmatic® 30A  
Spool Gun  
#130 831  
Air-cooled, 200-amp,  
1-lb spool gun for  
Lockable hinged steel  
panels cover and protect  
name plate gauges and  
ignition switch (padlock  
included). Also includes  
engine compartment door  
lock and key.  
Spectrum 2050 #903 777-01-2  
See Lit. Index No. PC/7.0.  
aluminum MIG. See Lit. Index No. M/1.73.  
WC-24 Control #137 549  
Use with Spoolmatic 30A.  
MIG (GMAW) or Flux Cored (FCAW)  
Millermatic®  
Cable Holder #043 946  
Saddle-bag-style cable  
holder. Convenient wrap-  
around storage of coiled  
cable for transportation.  
Stores 100 ft of 2/0 cable  
on each side.  
XRWire Feeders and Guns  
Passport® Plus  
Push-pull system designed to handle  
difficult-to-feed soft alloy wires such as  
aluminum. See Lit. Index No. M/1.7,  
M/1.71, and M/1.73.  
#907 401  
Portable, all-in-one  
MIG package  
features ultimate  
arc performance,  
self-contained gas  
TIG (GTAW) Welding  
Note: For best results do not weld when cable is coiled!  
Canvas cover cannot be used with cable holder.  
bottle, and flexibility to plug into 115 or 230  
V power with Miller exclusive Multi-Voltage  
Plug. See Lit. Index No. DC/12.53.  
Dynasty® 200 Series  
For premium portable  
AC/DC TIG arc quality.  
See Lit. Index No.  
AD/4.8.  
Roll Cage/Drip Pan  
#194 918 Field  
Heavy-duty galvanized  
steel structure  
designed to protect the  
machine. The roll cage  
meets offshore oil  
platform requirements with a drip pan and  
drain plug along with a heavy-duty lift eye.  
HF-251 Series  
#042 388  
HF-251D-1, 115 VAC  
#042 387  
HF-251D-2, 230 VAC  
High-frequency arc  
SuitCase X-TREME 8VS Wire Feeder  
#300 093  
Canvas Cover (Blue)  
#194 683 Field  
Attractive, waterproof  
canvas cover resists  
stains and mildew,  
and protects the  
SuitCase X-TREME 12VS Wire Feeder  
#195 500  
Lightweight, voltage-sensing wire feeders  
include secondary contactor and gas valve.  
Require drive roll kit. See Lit. Index No.  
M/6.41.  
starter and stabilizer.  
See Accessory Lit. Index No. AY/5.0.  
finish of your welder.  
Note: Canvas cover cannot be used with cable holder.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Genuine Miller Accessories  
Remote Controls (CC models only)  
(Continued)  
RFCS-14 HD Foot  
Control #194 744  
Foot current and  
contactor control.  
20 ft (6 m) cord and 14-pin plug. Rotary-motion fingertip control  
14-pin plug.  
RCC-14 Remote  
Contactor and  
Current Control  
#151 086  
RHC-3GD34A Remote  
Hand Control #041 122  
Allows for precise  
adjustment of amperage.  
Includes 20 ft (6 m) cord.  
®
fastens to TIG torch using two Velcro straps.  
Includes 28 ft (8.5 m) control cord.  
RMLS-14  
#129 337  
Fingertip  
RCCS-14 Remote  
Contactor and  
Current Control  
Remote Controls (CC/CV models)  
momentary- and maintained-contact rocker  
switch for contactor control. Push forward  
for maintained contact and back for  
momentary contact. Includes 20 ft (6 m)  
cord and 14-pin plug.  
RHC-14 Hand Control  
#129 340  
#043 688  
Up-and-down rotary-motion fingertip control  
Miniature hand control for  
remote current and contactor  
control. Dimensions: 4 x 4 x  
3-1/4 in (102 x 102 x 82 mm). Includes 20 ft  
(6 m) cord and 14-pin plug.  
®
fastens to TIG torch using two Velcro  
straps. Includes 28 ft (8.5 m) control cord.  
Extension Cords for 14-Pin Remote Controls  
#122 973 25 ft (7.6 m)  
#122 974 50 ft (15.2 m)  
#122 975 75 ft (22.9 m)  
Trailers and Hitches  
(For both models.)  
HWY-224 Trailer #043 805 For highway use.  
OFR-224 Trailer #043 802 For off-road use.  
A 2650 lb (1202 kg) capacity trailer. Welded  
steel tubing frame, heavy-duty axle with roller  
bearing hubs and leaf-spring suspension.  
Includes jack stand, 2 in (50 mm) ball hitch.  
HWY-224 also includes fenders and lights.  
Note: Trailer is shipped unassembled.  
4 West Four-Wheel Steerable  
Off-Road Trailer #042 801  
HWY-430 Tandem Axle Trailer #043 806  
Smooth riding with 3750 lb (1701 kg) capacity.  
Includes hand-operated parking brake, hydraulic  
brake system, and a break-away device to lock  
brakes if the trailer comes loose. Includes jack  
stand, fenders and lights. (Hitch must be  
ordered separately.)  
A heavy-duty 2570 lb (1166 kg) capacity trailer  
designed for use in mines, quarries, and other  
rough terrain. Has narrow 22 ft (6.7 m) turning  
radius. Includes 3 in lunette eye, universal hitch  
and safety chains.  
Note: Trailer is shipped unassembled.  
Note: Some assembly required.  
Cable Tree #043 826  
Provides an area to conveniently wrap weld  
cables and extension cords.  
Cable Tree #043 826  
Provides an area to conveniently wrap weld  
cables and extension cords.  
Lunette Eye 2-1/2 in (64 mm) #043 824  
Ball Hitch 2 in (50 mm) #043 864  
Lunette Eye 3 in (76 mm) #043 863  
Trailer Specifications (Subject to change without notice.)  
Track (Center Standard Tires  
Gross Axle  
Weight Rating Weight Rating Payload  
Gross Vehicle Net  
Height  
of Bed  
Road  
Clearance tires)  
8 in 55-1/4 in  
to center of  
(Standard rating  
or P-size rating) Dimensions  
Net  
Weight  
Model  
4 West  
2000 lb/axle  
(907 kg/axle)  
3000 lb  
(1361 kg)  
2570 lb  
21-1/4 in  
B78-13  
Length: 91 in (2311 mm)**  
Width: 61-1/4 in (1556 mm)  
430 lb  
(195 kg)  
(1166 kg) (540 mm) (203 mm) (1403 mm)  
2650 lb 7-1/2 in 52 in  
18-1/2 in  
(1202 kg) (470 mm) (191 mm) (1321 mm)  
HWY-224 3500 lb  
OFR-224 (1588 kg)  
2960 lb  
(1343 kg)  
B78-13B  
Length: 122-1/2 in (3112 mm) 355 lb  
Width: HWY 61 in (1549 mm)* (161 kg)  
OFR58-1/2 in (1486 mm)  
HWY-430 2200 lb/axle  
4280 lb  
(1941 kg)  
3750 lb  
19-1/4 in  
8-1/2 in  
52 in  
B78-13B  
Length: 156-1/2 in (3975 mm) 530 lb  
(998 kg/axle)  
(1701 kg) (489 mm) (216 mm) (1321 mm)  
Width: 61 in (1549 mm)*  
(240 kg)  
*Width at outside of fenders. **Does not include tongue.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Typical Installations  
Stick Electrode  
Stick (SMAW) Basic Equipment  
Work  
Flux-Cored (FCAW) Basic Equipment  
Flux Cored Gun  
SuitCase X-TREME 8VS  
#300 093  
X-TREME 8VS/  
X-TREME 12VS  
Feeder  
SuitCase X-TREME 12VS #195 500  
Work  
MIG (GMAW) Basic Equipment  
14-Pin  
MIG Gun  
SuitCase 8RC  
#194 938  
#194 940  
SuitCase  
8RC/12RC  
SuitCase 12RC  
Work  
Aluminum MIG with  
Spoolmatic 30A Gun  
Aluminum MIG (GMAW) Basic Equipment  
14-Pin  
14-Pin  
Spoolmatic® 30A #130 831  
WC-24  
WC-24  
#137 549  
Work  
TIG (GTAW) Basic Equipment  
TIG  
Torch  
Dynasty® 200 Series  
HF-251D-1  
*TIG power cable adapter required  
#042 388*  
HF-251D-1  
Work  
Cutting Torch  
Plasma Basic Equipment  
®
Spectrum 375 X-TREME #907 303  
®
Spectrum 375 X-TREME with X-CASE  
Spectrum  
#907 339  
#907 058  
#903 777-01-2  
®
Spectrum 625  
®
Spectrum 2050  
Work  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ordering Information  
Power Source and Factory Options  
Stock No.  
Description  
Qty.  
Price  
Big 40® Diesel CC  
Big 40® Diesel CC/CV  
#907 171  
#907 170  
CSA model with engine gauges and automatic idle  
CSA model with engine gauges and automatic idle  
#907 170-03-1 CSA Deluxe model w/ automatic idle, engine gauges, welding meters,  
AC/DC polarity switch and high kW option  
Field Kit Accessories  
Weld Ammeter and Voltmeter Kit  
Battery Voltmeter  
DC Polarity Switch Kit  
AC/DC Polarity Switch Kit  
Cold Weather Starting Aid Kit  
Lockable Fuel Cap Flame Arrestor Kit  
Spark Arrestor Muffler Kit  
Vandalism Lockout Kit  
Cable Holder  
#195 131  
#195 454  
#043 942  
#195 095  
#195 056  
#043 947  
#195 012  
#195 118  
#043 946  
#194 918  
#194 683  
Standard on deluxe model  
Changes DC polarity positive to negative  
For CC/CV models. Standard on deluxe model  
120 V block heater  
Padlock not included  
Horizontal externally mounted  
Lockable front control panel and engine compartment  
Saddle-bag-style. Fastens to machine  
Roll Cage/Drip Pan  
Canvas Cover  
Field. Cannot be used with cable holder  
Stick Accessories  
Accessory Kits  
#173 851  
#043 952  
2/0, 350 A, 100% duty cycle, 50 ft (15 m) stinger, 50 ft (15 m) work clamp  
2/0, 300 A, 100% duty cycle, 100 ft (30.5 m) stinger, 50 ft (15 m) work clamp  
MIG/Flux Cored Accessories  
Millermatic® Passport® Plus  
SuitCaseX-TREME8VS  
SuitCaseX-TREME12VS  
SuitCase8RC  
#907 401  
#300 093  
#195 500  
#194 938  
#194 940  
Includes gas bottle and MVP. See Lit. Index No. DC/12.53  
See Lit Index No. M/6.41  
See Lit Index No. M/6.41  
See Lit Index No. M/6.5  
See Lit Index No. M/6.5  
SuitCase12RC  
MIG (GMAW)/Flux Cored (FCAW) Guns  
Spoolmatic® 30A Spool Gun  
WC-24 Control  
See Lit Index Nos. AY/15.0, AY/16.0 and AY/17.0  
Requires WC-24 Control. See Lit. Index No. M/1.73  
See Lit. Index No. M/1.5  
#130 831  
#137 549  
XRWire Feeder Control and Guns  
See Lit. Index No. M/1.7, M/1.71, and M/1.73  
TIG Accessories  
Dynasty® 200 Series  
High Frequency Arc Starters  
See Lit Index No. AY/4.8  
See Lit. Index No. AY/5.0  
Remote Controls  
RHC-3GD34A  
RHC-14  
RFCS-14 HD  
RMLS-14  
RCC-14  
RCCS-14  
Remote Control Extension Cords  
#041 122  
#129 340  
#194 744  
#129 337  
#151 086  
#043 688  
CC models only, hand control  
CC/CV models only, amperage or voltage control  
CC/CV models only, foot control  
CC/CV models only, momentary and maintained contact switch  
CC/CV models only, fingertip control  
CC/CV models only, fingertip control  
See page 6  
Trailers and Hitches  
4-West Trailer  
HWY-224 Trailer  
OFR-224 Trailer  
Lunette Eye, 2-1/2 in  
Cable Tree  
HWY-430 Trailer  
Ball Hitch, 2 in  
Lunette Eye, 3 in  
#042 801  
#043 805  
#043 802  
#043 824  
#043 826  
#043 806  
#043 864  
#043 863  
4-wheel steerable implement trailer  
Trailer with lights, fenders and 2 in ball hitch  
Trailer with 2 in ball hitch  
Replaces the 2 in ball hitch on the HWY-224 or OFR-224  
Trailer mounted cable holder for HWY-224, OFR-224 or HWY-430  
Hitch required  
For HWY-430 only  
For HWY-430 only  
Date:  
Total Quoted Price:  
Distributed by:  
Litho in USA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Milwaukee Power Screwdriver 0501 02 User Manual
Minolta Film Camera XG 7 User Manual
National Instruments Network Card NI PXIe 1075 User Manual
Nokia Cell Phone 2220 RH 42 User Manual
One for All Universal Remote OARC03G User Manual
Oster Oven 6239 User Manual
Panasonic Camera Accessories AJ HPX2100 User Manual
Panasonic Cordless Drill EY6450 U1 User Manual
Panasonic Smoke Alarm 3377 User Manual
Patton electronic Network Card 2707C 2707D User Manual