Miele Washer W 3923 WPS User Manual

Operating instructions

for Washing machine

W 3923 WPS

en - GB

To avoid the risk of accidents or

damage to the machine it is

essential to read these instructions

before it is installed and used for the

first time.

M.-Nr. 07 170 860

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Caring for our environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Operating the washing machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Washing environmentally and economically . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Energy and water consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

How to wash correctly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Water plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Further extras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Soak . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Rinse hold. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Extra rinse. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Spinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Final spin speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Rinse and interim spin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

To omit the final spin (Rinse hold) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

To omit rinse and interim spin and the final spin (No spin) . . . . . . . . . . . . . . . 23

Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Garment care label symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Cancelling a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Changing a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Adding or removing laundry after a programme has started . . . . . . . . . . . . . . . . 34

Safety lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

The correct detergent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Water softener . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Washing with several components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Fabric conditioners and liquid starch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Automatic dispensing of fabric conditioner or liquid starch to laundry

at the end of a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Adding fabric conditioner or starch separately . . . . . . . . . . . . . . . . . . . . . . . . 37

Colour run and dye removers/dyes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

External casing and fascia panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Extra cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Cleaning the detergent dispenser drawer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Descaling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Cleaning the filter in the water inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

The programme does not start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Problems with the load size indicator or calibrating to zero . . . . . . . . . . . . . . . . . 43

General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

An unsatisfactory wash result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

The door will not open . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Opening the drum door in the event of a blocked drain outlet and/or power failure . 47

Blocked drain outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Installation and connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Installation surface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Installing the washing machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Removing the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Re-fitting the transit bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Levelling the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Screwing out and adjusting the feet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Building under a continuous worktop/in a kitchen run . . . . . . . . . . . . . . . . . . . 56

Washer and Dryer stack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

The Miele Waterproof system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Connection to the drainage system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Notes for test institutes: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

To open the Settings menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Language F. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Time (of day) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Gentle action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Longer pre-wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Suds cooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Temperature unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Keypad tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

This washing machine is not

intended for use by persons (including

This washing machine conforms to

current safety requirements.

Inappropriate use can, however,

lead to personal injury and damage

to property.

children) with reduced physical,

sensory or mental capabilities, or lack

of experience and knowledge, unless

they are supervised whilst using it or

have been given instruction concerning

its use by a person responsible for their

safety.

To avoid the risk of accidents and

damage to the washing machine,

please read these instructions

carefully before using it for the first

time. They contain important

Safety with children

Keep children away from the

information on its installation, safety,

use and maintenance.

washing machine at all times. It is not a

toy! To avoid the risk of injury do not

allow children to play on or near it or to

play with its controls. Supervise

Keep these instructions in a safe

place and ensure that new users are

familiar with the content. Pass them

on to any future owner.

children whilst you are using it.

Older children may only use the

washing machine if its operation has

been clearly explained to them and

they are able to use it safely,

Correct application

Only use the washing machine to

wash items which are specified by the

manufacturer to be machine-washable

on the wash-care label, and textiles

composed of hand-washable wool or

wool blend fabrics as well as satin,

lace, silk and other hand-washable

garments. Any other applications may

be dangerous. The manufacturer

cannot be held liable for damage

resulting from incorrect or improper use

or operation.

recognising the dangers of misuse.

For machines with a 'porthole' door,

remember that the porthole glass will

be hot when washing at very high

temperatures.

Do not let children touch it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

Technical safety

Unauthorised repairs could result in

unforeseen dangers for the user, for

which Miele cannot accept liability.

Repairs should only be undertaken by a

Miele approved service technician.

Ensure current is not supplied to the

machine until after maintenance or

repair work has been carried out.

Before setting up the washing

machine, check it for any externally

visible damage.

Do not install or use a damaged

washing machine.

Before connecting the washing

machine, ensure that the connection

data on the data plate (voltage and

connected load) match the mains

electricity supply. If in any doubt,

consult a qualified electrician.

If the connection cable is faulty it

must only be replaced by a Miele

approved service technician to protect

the user from danger.

In the event of a fault or for cleaning

purposes, the washing machine is only

completely isolated from the electricity

supply when:

The electrical safety of this washing

machine can only be guaranteed when

continuity is complete between it and

an effective earthing system which

complies with current local and national

safety regulations. It is most important

that this basic safety requirement is

present and regularly tested, and

where there is any doubt the household

wiring system should be inspected by a

qualified electrician. The manufacturer

cannot be held liable for the

– it is switched off at the wall socket

and the plug is withdrawn, or

– it is switched off at the mains, or

– the mains fuse is withdrawn, or the

screw-out fuse is removed (in

countries where this is applicable).

The Miele "Water protection system"

protects from water damage provided

the following conditions have been met:

– the machine is correctly plumbed in

and connected to the electricity

supply.

consequences of an inadequate

earthing system (e.g. electric shock).

Do not connect the washing

– if a fault has been identified, the

machine must be examined by a

competent person before further use,

and repaired if necessary.

machine to the mains electricity supply

by an extension lead. Extension leads

do not guarantee the required safety of

the appliance (e.g. danger of

overheating).

In countries where there are areas

which may be subject to infestation by

cockroaches or other vermin, pay

particular attention to keeping the

machine and its surroundings in a

clean condition at all times. Any

Faulty components must only be

replaced by genuine Miele original

spare parts. Only when these parts are

fitted can the safety standards of the

machine be guaranteed.

damage which may be caused by

cockroaches or other vermin will not be

covered by the machine guarantee.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

This washing machine may only be

Turn off the stopcock if the machine

is to be left for any length of time (e.g.

used in mobile installations such as

ships if a risk assessment of the

installation has been carried out by a

suitably qualified engineer.

holiday), especially if there is no floor

drain (gully) in the immediate vicinity.

Flooding danger.

If hooking the drain hose into a wash

basin, check that the water can drain

off quickly enough to prevent the sink

from overflowing. Make sure the drain

hose is secure, so that the force of the

water flowing out of the hose does not

dislodge it.

Correct use

Do not install your washing machine

in rooms where temperatures below

freezing may occur. Frozen hoses may

burst or split. The reliability of the

electronic control unit may be impaired

at temperatures below freezing point.

Take care to ensure that foreign

objects (e.g. nails, pins, coins, paper

clips) do not find their way into the

machine with the laundry. These may

damage components of the machine

(e.g. suds container, drum), which in

turn can result in damage to the

laundry.

Before using the washing machine

for the first time, check that the transit

bars at the rear of the machine have

been removed (see section on

"Installation"). During spinning, a transit

bar which is still in place may result in

damage to both the machine and

adjacent furniture or appliances.

If the correct amount of detergent is

dispensed, the machine should not

need to be descaled. If, however, you

do wish to descale the machine only

use proprietary non-corrosive descaling

agents and strictly observe the

instructions on the packaging. A

special descaling agent is available to

order from the Miele Spare Parts

Department or via the internet on

www.miele-shop.com.

Download from Www.Somanuals.com. All Manuals Search And Download.

Warning and Safety instructions

Textiles which have been

Only remove laundry from the

pre-treated in solvent based cleaning

agents must be thoroughly rinsed in

clean water before being washed in the moving drum is extremely dangerous

washing machine once the drum has

stopped turning. Reaching into a

machine.

and could result in injury.

Never use solvent based cleaning

agents, e.g. those containing benzene,

Accessories

in this machine, as this may result in

damage to component parts and create

toxic fumes. Such agents also pose a

fire and explosion hazard.

Accessory parts may only be fitted

when expressly approved by Miele. If

other parts are used, guarantee,

performance and product liability

claims will be invalidated.

Never use solvent based cleaning

agents, e.g. those containing benzene,

to clean the outside surfaces of this

machine. They can cause damage to

plastic surfaces.

Miele cannot be held liable for

damage caused by non-compliance

with these Warning and Safety

instructions.

Only use dyes specified by the

manufacturer as being suitable for use

in a domestic washing machine. Always

observe the manufacturer's instructions

carefully.

Colour run and dye removers

contain sulphur compounds which can

cause damage such as corrosion. Do

not use these products in this machine.

If liquid detergent comes into

contact with the eyes, rinse them

thoroughly with lukewarm water imme-

diately. If swallowed, seek medical

assistance immediately and retain the

packaging or label for reference. Those

with skin problems or sensitive skin

should avoid their skin coming into

contact with liquid detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the washing machine

Control panel

aStart/Stop button

fExtra options buttons

Various extra options can be added

to the washing programmes.

For starting the programme selected

and cancelling a programme once it

has started.

gProgramme selector

bDisplay with Menu buttons

See the next pages for more

information.

For selecting the wash programme

and temperature for that programme.

The programme selector can be

turned clockwise or anti-clockwise.

c+ button

For selecting delay start.

hI-On/0-Off button

For switching the machine on or off.

dPC / Optical interface

This is used by service technicians

to run diagnostic checks on your

machine and can also be used to

update programming data in the

future.

iDoor button

Opens the machine door.

eLoad/Detergent button

For calling up the load size or the

recommended amount of detergent,

and for calibrating the load size

sensor to zero.

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the washing machine

Display

Selecting programmes via the

display

The display is used for the following:

With the programme selector at the

Further programmes position, you can

select one of the following

programmes:

Selecting and displaying settings

– Temperature

– Spin speed

– Dark garments

– Curtains

– Soak duration

– Delay start

– Pillows

– Cancelling a programme

– Safety lock

– Sportswear

– Outerwear

– Proofing

– Estimated programme duration

– Separate rinse

Selecting extra options via the

display

By pressing the Further extras button,

you can select (depending on the

programme) the following extra options:

– Soak

– Rinse hold

– Extra rinse

Download from Www.Somanuals.com. All Manuals Search And Download.

Operating the washing machine

Menu buttons

To alter a setting:

Cottons

Duration:

60°C

1:49 h

1600 rpm

Pressing the left hand Menu button

under 60°C alters the temperature and

pressing the right hand Menu button

under 1600 rpm alters the spin speed.

To confirm a setting:

Further programmes

Dark garments

Various settings are made via the Menu

buttons.

Continue

They are used to alter or confirm the

value displayed above the vertical line.

Pressing the left hand Menu button

under Continue calls up further

programmes, and you can then confirm

your selection of the highlighted

programme by pressing the right hand

Menu button under OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Setting the language

Before using the machine for the first

time ensure that it is correctly

installed and connected. See

"Installation and connection". Also

check that the drain filter is securely

tightened to prevent the risk of water

leaks during use.

You will be asked to select the

language you require for the display. It

is possible to change the language at

any time via the Settings menu.

Sprache

deutsch

This washing machine has

undergone a thorough functional test

in the factory and there will be some

residual water in the drum from this

process.

^ If the language shown is not the one

you want, select the language you do

want by pressing the left hand Menu

button under .. Confirm your

selection by pressing the right hand

Menu button under OK.

The washing machine has a sensor

which measures the amount of laundry

in the drum. This determines the

amount of detergent required. To allow

the load size indicator to function

correctly, you must first run a wash

programme without any laundry and

without detergent.

Setting the time of day

The display for setting the time will then

appear.

12:00

^ Open the stopcock.

Change

^ Press the I-On/0-Off button in.

^ Select the hours you want by

pressing the left hand Menu button

under Change, and confirm this with

the right hand Menu button under

OK.

If the washing machine is being

switched on for the first time, the

welcome screen will appear.

The welcome screen will appear in the

display every time the machine is

switched on until a programme lasting

longer than 1 hour has been

completed.

^ Then set and confirm the minutes.

The display for setting the language will

then appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before using for the first time

Reminder to remove transport struts

Calibrating the load sensor to zero

^ Switch on the washing machine.

^ Open the drum door.

To avoid the risk of damage, the

transport struts must be removed

before the machine is used for the

first time. See "Installation and

connection" for instructions on how

to do this.

^ Turn the programme selector to the

Cottons position.

^ After removing the transport struts (if

this has not already been done by

your fitter) press the right hand Menu

button under OK.

Running your first programme

Your machine is now ready for the first

programme to be run.

15:00

^ Press and hold the Load/Detergent

button pressed in until the following

message appears in the display:

Select programme

^ Turn the programme selector to the

Cottons position.

Zero setting

^ Press the Start/Stop button.

^ At the end of the programme switch

the machine off.

^ Switch off the washing machine.

The machine is now ready for use.

Before you can use the washing

machine, the load sensor has to be

calibrated to zero as you would with

bathroom scales.

Download from Www.Somanuals.com. All Manuals Search And Download.

Washing environmentally and economically

Energy and water consumption

Detergent

– Water consumption and energy

usage are determined by the size of

the load.

– Do not exceed the amounts of

detergent recommended by the

manufacturer on the packaging.

To make the most out of your

machine, load the maximum dry load

for the programme you are using.

– Adjust the dosage to the degree of

soiling of the laundry.

– Reduce the amount of detergent for

smaller loads. Use the Load/

Detergent button.

– Use the Automatic and Express

programmes for small loads.

– When smaller amounts of laundry are

washed using the Cottons

Choosing the correct Extra option

(Short, Soak, Pre-wash)

programme, the automatic load

recognition system will reduce the

amount of water, time and energy

used. This may mean that the time

left shown in the display is adjusted

during the course of the wash

programme.

Select:

– A wash programme together with the

Short extra option for light to normal

soiling where there are no obvious

marks.

– Using the Cottons 60°C programme

instead of the Cottons 95°C

– A wash programme without any extra

options for normal to heavy soiling

with visible staining.

programme will give energy savings

of between 35% and 45%. This is

sufficient for most levels of soiling.

For stubborn or old stains, use the

Soak extra option.

– A wash programme together with the

Soak extra option for heavily soiled

laundry.

– The Pre-wash extra option for laundry

with large amounts of dirt (e.g. dust,

sand).

When drying with a tumble dryer

Selecting the highest possible spin

speed for the wash programme will

save energy when drying in a tumble

dryer afterwards.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

Brief instructions

,^{If you use a solvent-based clean-}

ing agent (e.g. one containing ben-

zene) to pre-treat a stain, make sure

that any plastic parts (e.g. buttons)

are protected, and that the cleaning

agent is rinsed off before washing the

garment in the machine.

The headings numbered A, B, C, . . .

show the operating sequence and can

be used as brief instructions.

ASort the laundry

,^{Do not use solvent-based}

cleaning agents in this machine.

^ Sort the laundry by colour and by

care label. Most garments have a

textile care label in the collar or side

seam.

Dark textiles often contain excess dye

and should be washed separately

several times before being included in

a mixed load. Always wash whites and

coloureds separately.

^ Empty all pockets.

,^{Foreign objects (e.g. nails,}

coins, paper clips, etc.) can cause

damage to garments and

– Curtains: Remove lead weights first

or place in a laundry bag.

components in the machine.

– Underwiring and collar stiffeners:

Any loose wiring in bras, shirt collar

stiffeners, etc. should be removed or

sewn in.

^ Badly soiled areas, stains etc. should

be cleaned as soon as possible,

preferably whilst still fresh. Spillages

should be carefully dabbed off using

a soft colourfast cloth. Do not rub!

– Knitted garments, trousers and

jeans, T-shirts and sweat shirts: Turn

inside out, if recommended by the

manufacturer.

Badly soiled areas can be pre-treated

with liquid detergent, stain removers

etc. first, following the manufacturer's

instructions. With particularly stubborn

stains ask your dry cleaner for advice.

– Close any zips, fasten hooks and

eyes etc before washing.

– Fasten duvet covers etc. to prevent

small items from being rolled up

inside them.

Do not wash any items in this machine

which are specified by the

manufacturer as not washable on the

care label. (h symbol)

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

BSwitch on the washing machine

DSelect a temperature / spin speed

The interior drum lighting will come on.

The suggested temperature and/or spin

speed can be changed if required.

The programme selector will light up

and the display will ask you to select a

programme.

Cottons

Duration:

60°C

1:49 h

CSelect a programme

1600 rpm

^ By pressing the left hand Menu

button under 60°C you can alter the

temperature, and by pressing the

right hand Menu button under

1600 rpm you can alter the spin

speed.

When you turn the programme selector

to Further programmes, these will

appear in the display.

Further programmes

Dark garments

^ Turn the programme selector to the

required programme.

Continue

The programme selected will appear

in the display.

^ Pressing the left hand Menu button

under Continue calls up the further

programmes, and you can then

confirm your selection of the

highlighted programme by pressing

the right hand Menu button under

OK.

Dark garments

Duration:

40°C

1:15 h

1200 rpm

^ The suggested temperature and/or

spin speed can now be changed if

required.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

The display shows the amount of

laundry loaded in the drum as a % (in

25% steps) of the maximum load

permissible for the programme

selected.

^ Unfold the laundry and load loosely

in the drum. Mixing both large and

small items gives better wash results

and also helps distribute the load

evenly during spinning.

The most efficient use of energy and

water is achieved when a full load is

washed. However, do not overload as

this causes creases and reduces

cleaning efficiency.

^ Select any extra options by pressing

the appropriate button. The relevant

indicator light will come on to show

which extra option has been

selected.

Make sure that no garments are

caught between the drum door and

seal.

^ Press the Further extras button to

select the following extra options

(depending on the programme

selected): Soak, Rinse hold and Extra

rinse.

Not all the extra options are suitable for

use with every programme.

You can only select extra options which

are compatible with the basic

programme being used.

ELoad the drum

^ Press the Door button to open the

drum door.

The load size indicator display will

appear.

^ Shut the door with a gentle swing.

Load

<25%

Continue

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

FAdd detergent

It is important to dispense the correct

amount because . . .

When the door is closed, the load size

indicator will be replaced with the

detergent percentage display.

. . . too little detergent results in:

– Laundry not getting properly clean

and with time it may become grey

and hard to the touch.

Detergent

75%

– Greasy particles clinging to the

laundry.

Back A

The percentage shown relates to the

amount of detergent recommended by

the manufacturer on the packaging.

– Limescale deposits on the heater

elements.

. . . too much detergent results in:

40% = Add slightly less than half

the amount recommended

– Excessive foam which causes a low

level of agitation and poor wash,

rinse and spin results.

50% = Add half the amount

recommended

– High water consumption (an

additional rinse cycle will

automatically switch in).

60% = Add slightly more than half

the amount recommended

75%

= Add three quarters of

the amount recommended

– A burden to the environment.

100% = the full amount of detergent

recommended

You also need to take the level of

soiling and water hardness into

account.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

GSelect Delay start (if required)

^ Press the + button to set the time

you wish to programme to end at.

See "Delay start" for more information.

HStart the programme

^ Press the flashing Start/Stop button.

If a delay start time has been set, then

this will count down in the display. At

the end of the delay start time or

immediately after the programme has

started (if no delay start time has been

selected) the estimated programme

duration will appear in the display.

During the first 8 minutes the machine

measures how much water is being

absorbed by the laundry. The

^ Pull out the detergent drawer and

add detergent to the compartments

as follows:

Detergent for the pre-wash (divide

the total recommended amount as

follows: add ¹/₃to compartment i

and ²/₃to compartment j)

programme duration may be longer or

shorter depending on this absorbency

rate.

The programme sequence is also

shown in the display. The machine lets

you know which section of the

Detergent for the main wash,

including Soak if selected

programme has been reached.

The drum lighting switches off once the

programme has started.

Fabric conditioner or liquid starch

^ Close the detergent drawer.

See "Detergent" for further information.

Download from Www.Somanuals.com. All Manuals Search And Download.

How to wash correctly

IRemove the laundry when the

programme has finished

In the anti-crease phase after the

programme has finished, the following

will appear alternately in the display:

Cottons

Anti-crease

60°C

1600 rpm

and

^ Check the folds in the door seal for

any small articles, e.g. buttons, which

might be lodged there.

Programme finished

Unload the drum

before switching off

Important

^ Press the Door button to open the

Always remove the laundry before

switching the machine off. This is

important to ensure that the load size

indicator works correctly.

drum door.

^ Remove the laundry.

Check that all items have been

removed from the drum. Items left in

the drum could discolour other items

in the next wash or become

^ Turn the programme selector to Stop.

^ Switch the machine off with the I-On/

0-Off button.

discoloured themselves.

^ Close the drum door. Otherwise there

is the danger of objects being placed

inadvertently in the drum. If these

remained unnoticed and were

washed in the next load, they could

damage the laundry.

Download from Www.Somanuals.com. All Manuals Search And Download.

Extra options

Short

You can now use the display to select

the soak time you require.

For light to nomal soiling with no visible

staining.

Soak duration

Duration: 0:30 h

The duration of the main wash is

reduced.

Increase

Water plus

^ Each time the left hand Menu button

under Increase is pressed, the soak

duration is increased by 30 minutes.

Confirm the duration required by

pressing the right hand Menu button

under OK.

The water level in the main wash and

the rinses will be increased if the Water

plus option is selected.

Pre-wash

Further extras

For laundry with large amounts of dirt

e.g. dust, sand.

9 Soak

Further extras

Continue

^ Press the left hand Menu button

under Continue until Back appears

in the display and confirm this with

the right hand Menu button under

OK.

Soak

For heavily soiled and stained items

with protein stains (e.g. blood, fats and

oils, cocoa).

– To delete the soak time

A length of time of between 30 minutes

and 6 hours can be chosen in 30

minute increments for the soak

process.

^ Press the Further extras button, and

then the right hand Menu button

under OK to switch off Soak.

– To select the soak duration

^ Press the Further extras button.

Further extras

Rinse hold

See the next page.

Extra rinse

8 Soak

An additional rinse cycle is carried out

to achieve a better rinse result.

Continue

^ Select Soak by pressing the right

hand Menu button under OK.

Download from Www.Somanuals.com. All Manuals Search And Download.

Spinning

Final spin speed

To omit the final spin (Rinse hold)

Programme

Cottons

rpm

1600

1200

600

^ Press the Further extras button and

select the Rinse hold setting. The

laundry will not be spun and will

remain suspended in the final rinse

water. This reduces creasing if the

laundry is not going to be removed

from the drum immediately after the

end of the programme.

Minimum iron

Delicates

Woollens

Automatic

Shirts

1200

600

Express

1600

900

– To start the final spin:

Denim

Hygiene

1600

1200

600

The washing machine will display the

maximum spin speed possible. You

can select a spin speed lower than

this. Start the final spin by pressing

the Start/Stop button.

Dark garments

Curtains

Pillows

1200

400

Silks

– To end the programme:

Sportswear

Outerwear

Proofing

1200

800

Press the Door button. The water will

drain away. Press the Door button

again to open the door.

1000

1600

1200

1500

Drain / Spin

Separate rinse

Starch

To omit rinse and interim spin and

the final spin (No spin)

You can reduce the final spin speed.

However, you cannot select a final spin

speed higher than that shown in the

chart above.

^ Select No spin from the spin speed

menu. The laundry is not spun after

the final rinse. The water will drain

away and the machine will go straight

into the anti-crease stage. An

Rinse and interim spin

additional rinse is introduced if this

setting is selected with the Cottons,

Hygiene, Minimum iron, Express and

Automatic programmes.

There is a spin after the main wash and

between the rinses. A reduction in the

final spin speed will also reduce the

interim spin speed. If a spin speed of

less than 700 rpm is selected in the

Cottons and Hygiene programmes, an

additional rinse is introduced.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delay start

With delay start you can choose when

you want the programme to end. The

start of a programme can be delayed

from 30 minutes up to a maximum of 24

hours, allowing you to make use of

night-time economy electricity rates, for

example.

Delay start

from 9:05

Change

9:05

to 10:49

Back A

BUse the left hand Menu button under

Change to select the time you want

the programme to end at.

The current time of day needs to

have been set for delay start to work

correctly.

The first press on the button will adjust

the programme end time to the next

half or full hour. Each subsequent press

on the button will delay the programme

end time by 30 minutes.

To select delay start

Delay start

from 16:16

Change

9:05

to 18:00

CConfirm the time you require by

pressing the right hand Menu button

under OK.

To begin delay start

DPress the Start/Stop button.

Cottons

ASelect the programme you want and

then press the + button.

The display shows the start time: from

xxx, the time for the programme to end:

to xxx, and the current time.

Start in:

60°C

7:11 h

1600 rpm

The display will show when the

programme will be started in hours and

minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Delay start

To alter delay start

To cancel delay start

You can subsequently select a later

programme end time if you wish.

^ Press the Start/Stop button.

The following will appear in the display:

^ Press the + button.

Stopped:

Delay start

from 16:16

Change

9:05

to 18:00

Delete

Cancel delay start

Continue

^ Confirm by pressing the right hand

^ Use the left hand Menu button under

Change to alter the time you want the

programme to end at.

Menu button under OK.

^ Now you can select a different

programme, or

^ Confirm by pressing the right hand

^ Press the Start/Stop button to start

Menu button under OK.

the programme straight away.

To delete delay start

The actual load size can only be

determined accurately by the

machine once the programme has

started. The programme end time

may, therefore, be a bit later or

earlier than first indicated.

You can delete the delay start time and

start the selected programme straight

away.

^ Press the + button.

Delay start

from 16:16

Change

9:05

to 18:00

Delete

^ Press the right hand Menu button

under Delete.

^ Press the Start/Stop button to start

the programme straight away.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme chart

Cottons 98E76*

30°C to 95°C

Max. load 6.0 kg

Fabric

Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,

underwear, T-shirts etc.

Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse

Note for test institutes:

Short programme: 3.0 kg load and Short extra option

Minimum iron

30°C to 60°C

Max. load 3.0 kg

43218E76*

Fabric

Synthetics, mixed fibres and easy care cottons. If fabrics have a

high proportion of man-made fibres, it is advisable to programme

the machine for "Gentle action". See "Settings menu".

Note

Reduce the spin speed for fabrics which crease easily.

Extra options Pre-wash, Soak, Short, Water plus, Rinse hold, Extra rinse

Delicates 4321ac* cold to 60°C Max. load 2.0 kg

Fabric For delicate garments made of synthetic fibres, mixed fibres,

rayon and easy care cottons.

Extra options Pre-wash, Soak, Short, Rinse hold

Woollens /ac* cold to 40°C

Fabric

Max. load 2.0 kg

Machine-washable or hand-washable wool or wool blend fabrics.

If the care label does not specify a temperature, wash using the

cold setting.

Extra option Rinse hold

Automatic 7621*

cold to 40°C

Max. load 3.5 kg

Fabric

Mixed loads of garments suitable for the Cottons and Minimum

iron programmes. Sort according to colour.

Note

The wash parameters (e.g. water level, wash rhythm and spin

speed) are adjusted automatically in this programme to ensure

the best possible care and wash result for each item.

Extra option Rinse hold

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme chart

Shirts

cold to 60°C

Max. load 2.0 kg

Notes

– Pre-treat collars and cuffs if necessary.

– Wash silk garments in the Silks programme.

Extra options Short, Water plus, Rinse hold

Express 76* cold to 40°C

Fabric Small loads of items which require freshening up and which can

be washed in a Cottons programme.

Extra options Water plus, Rinse hold, Extra rinse

Max. load 3.0 kg

Denim

cold to 60°C

Max. load 3.0 kg

Notes

– Wash denim inside out.

– Denim often contains excess dye and will run during the first

few washes. Wash light and dark coloured items separately.

Extra options Pre-wash, Soak, Short, Rinse hold

Hygiene 8*

60°C

Max. load 6.0 kg

Fabric

Fabrics which will be in direct contact with the skin, e.g.

underwear, nappies, towelling, bed linen, pillow and mattress

covers.

Note

There is a longer temperature holding time in the main wash.

Extra options Pre-wash, Soak, Water plus, Rinse hold, Extra rinse

Dark garments cold to 40°C Max. load 3.0 kg

Item

Note

Dark garments made from cotton or mixed fibres.

Wash inside out.

Extra options Short, Rinse hold

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme chart

Curtains

cold to 40°C

Max. load 2.0 kg

Item

Curtains, including net curtains, specified as machine-washable

by the manufacturer. A pre-rinse without detergent is carried out

automatically to remove dust.

Note

For curtains which crease easily, reduce the spin speed or

deselect it.

Extra options Water plus, Rinse hold

Pillows

40°C to 60°C

2 pillows (40 x 80 cm) or

1 pillow (80 x 80 cm)

Item

Note

Washable pillows with feather, down or synthetic fillings.

Please observe the instructions on the wash care label.

Extra options Water plus, Rinse hold

Silks /c*

cold to 30°C

Max. load 1.0 kg

Fabric

Silks and other handwashable fabrics with no wool content, e.g.

satin, lace and silk.

Note

Place tights, bras etc. in a washing bag.

Extra options Water plus, Rinse hold, Extra rinse

Sportswear

30°C to 60°C

Max. load 2.0 kg

Item

Lightly soiled sports garments which require washing or

freshening up.

Extra options Pre-wash, Soak, Short, Water plus, Rinse hold

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme chart

Outerwear

cold to 40°C

Max. load 2.0 kg

Item

Outerwear made from micro-fibres such as Gore-Tex^®,

SYMPATEX^®, WINDSTOPPER^®etc.

Notes

– Zip up jackets before washing.

– Do not use fabric conditioner.

Extra options Pre-wash, Soak, Short, Water plus, Rinse hold

Proofing

40°C

Max. load 2.0 kg

Item

For treating microfibre fabrics, skiwear, fine, closeweave cotton

garments (poplin) or tablecloths to provide a water and dirt

resistant finish.

Notes

– The items should be freshly washed and spun or dried before

proofing.

– For best results, the items should be heat-treated afterwards,

either in a tumble dryer or by ironing.

Extra option Rinse hold

Spin

Max. load 6.0 kg

Notes

– Drain only: Select No spin.

– Make sure you select the appropriate spin speed.

Separate rinse

Extra option Rinse hold

Starch

Max. load 6.0 kg

Note

The laundry (table cloths, napkins, overalls) should be washed

but not treated with fabric conditioner.

Extra option Rinse hold

* Please note that the "buckets" represent garment care label symbols. See

"Garment care label symbols".

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme sequence

Main wash

Rinses

Spinning

Water

level

Wash

Water Rinses

level

Interim

Final spin

rhythm

spin

–

Cottons

(

–

(

–

2-4³⁾⁴⁾

Minimum iron

Delicates

Woollens

Automatic

Shirts

2-3⁵⁾

–

abc

2-3⁵⁾

Express

2-3⁵⁾

–

Denim

3-4⁴⁾

Hygiene

–

Dark garments

Curtains¹⁾

Pillows²⁾

–

Silks

–

Sportswear

Outerwear

Proofing

L⁶⁾

–

Drain / Spin

Separate rinse

Starch

–

(

–

d = Low water level

( = Medium water level

e = High water level

a= Intensive rhythm

b= Normal rhythm

c= Gentle rhythm

d= Sensitive rhythm

e= Handwash rhythm

See the following page for more information about the programme sequences.

Download from Www.Somanuals.com. All Manuals Search And Download.

Programme sequence

This machine has fully electronic

controls with automatic load

Special features in the programme

sequences:

recognition. It takes in the right amount

of water required for the programme

depending on the amount of laundry

and its absorbency rate. This means

that programme cycles and durations

can vary.

Anti-crease:

At the end of every programme, with

the exception of the Woollens

programme, the drum continues to turn

at intervals for up to 30 minutes to help

prevent creasing. The door can be

opened and laundry removed at any

time during the anti-crease phase.

The programme sequences outlined in

the chart are based on the basic

programme with a full load. Extra

options which can be selected have not

been taken into account.

Pre-rinse: A pre-rinse without

detergent is carried out automatically

to remove dust.

The display shows the stage the

programme has reached.

Run-up to spin: A run-up to spin is

carried out before the wash process

begins to deflate the pillows.

Subsequent water intake for the main

wash is through compartment j.

A second rinse is carried out when a

temperature of 60°C to 95°C has

been selected. A third rinse is

carried out when a temperature

below 60°C is selected.

A third/fourth rinse is carried out if:

– there is too much foam in the drum

– a spin speed lower than 700 rpm has

been selected

– No spin has been selected

⁵⁾A third rinse is carried out if:

No spin has been selected

In the Outerwear programme,

laundry is only spun after the main

wash.

Download from Www.Somanuals.com. All Manuals Search And Download.

Garment care label symbols

Washing

Ironing

The figure quoted in the bucket is the

maximum temperature the garment

can be washed at. The number of

bars under the symbol indicates the

level of agitation permitted.

The number of dots indicates the

ironing temperature

Hot iron (max sole plate temp.

approx. 200°C)

Medium hot iron (max sole

plate temp. approx. 150°C)

No bar under the symbol: =

normal agitation

Cool iron (max sole plate

temp. approx. 110°C). Do not

steam iron garments carrying

this symbol.

One bar under the symbol: =

reduced agitation

Two bars under the symbol: =

much reduced agitation

Do not iron

Hand wash (if no temperature

is specified use the lowest

temperature or cold)

Professional cleaning

Dry clean only. The letters

indicate the type of cleaning

agent required.

Do not wash

Professional Wet Clean only

Do not dry clean

Drying

The number of dots indicates the

drying temperature

Bleaching

Normal temperature

Low temperature

Do not tumble dry

{

Any oxidising bleaching

agent can be used

Only use an oxygen based

bleach or a non-chlorine

bleach

Do not bleach

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the programme sequence

Cancelling a programme

Interrupting a programme

You can cancel a programme at any

time after it has started.

^ Switch the machine off with the I-On/

0-Off button.

^ Press the Start/Stop button.

Stopped:

To continue with the same programme:

^ Switch the machine back on with the

I-On/0-Off button.

Cancel programme

Changing a programme

Continue

After the start of a programme it is no

longer possible to select a different

programme.

^ Press the right hand Menu button

under OK.

The suds will be pumped away.

If you want to remove the laundry:

^ Press the Door button.

Temperature

It is possible to select a different

temperature up to 5 minutes after the

programme has started.

If you want to select a different

programme:

Spin speed

^ Switch the machine off with the I-On/

0-Off button.

It is possible to change the spin speed

up until the final spin begins.

^ Switch the washing machine back on

again.

Extra options

^ Check that there is still detergent in

the detergent drawer. Add detergent,

if necessary.

It is possible to select or deselect the

Short and Water plus extra options up

to 5 minutes after the programme has

started.

^ Select and start a new programme.

It is not possible to make any

changes if the safety lock has been

activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the programme sequence

Adding or removing laundry

after a programme has started

Safety lock

The safety lock prevents the machine

from being opened or the

programme cancelled during a wash

programme.

^ Press the Door button to open the

drum door.

^ Add or remove items.

^ Close the drum door.

To activate the safety lock

The programme will continue

automatically.

^ Press and hold in the Start/Stop

button after the programme has

started.

Please note:

Stopped:

Once a programme has started the

machine cannot recognise any

adjustment to the load.

Cancel programme

Continue

For this reason, if laundry is added or

removed after the start of a programme,

the machine will always complete the

programme cycle assuming a full load

which can lead to an increase in the

programme duration shown in the

display.

By pressing the left hand Menu button

under Continue, the following will

appear in the display:

Activate safety lock

^ Confirm by pressing the right hand

Menu button under OK.

The door cannot be opened, if:

The following will appear in the display:

– the suds temperature is above 55°C.

– the water is above a certain level.

0 Locked

The safety lock is now activated. It is

deactivated automatically at the end of

the programme.

– the programme has reached the

Final spin stage.

To deactivate the safety lock

If you press the Door button when the

above conditions are present, the

following will appear in the display:

^ Press the Start/Stop button.

The following will appear in the display:

/ Door locked

Deactivate safety lock

^ Press the right hand Menu button

under OK, and then the following will

come up in the display:

1 Unlocked

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

The correct detergent

All modern detergents produced for automatic washing machines are suitable.

Use dispensing aids, e.g. balls, if these are supplied with the detergent. Tablets

are suitable for full loads, but note that it may be impractical to reduce tablets for

smaller loads. Some tablets do not dissolve as rapidly as others, and may not be

suitable for programmes with short durations.

Do not use biological detergents on silk as the enzymes may damage the silk!

Instructions for use and recommended dosage amounts are given on the

detergent packaging.

Liquid detergent should be dispensed using a ball provided by the manufacturer

for programmes without a pre-wash.

For programmes with a pre-wash you will need to purchase a special container

from the Miele Spare Parts department which sits in the main wash compartment

j of the detergent dispenser drawer. Add liquid detergent to this container for

the main wash and to compartment i for the pre-wash.

All purpose detergent

Detergent for coloured

Detergent for delicates

for whites*

fabrics*

Cottons

Minimum iron

Delicates

Woollens

Automatic

Shirts

Liquid detergent for machine-washable woollens

Express

Denim

Hygiene

Dark garments

Curtains

Pillows

Silks

Liquid detergent for machine-washable silk and woollens

Sportswear

Outerwear

Proofing

Only use proofing agents which are stated by the manufacturer as being "suitable

for use on membrane textiles" as these consist of fluorochemical compounds. Do

not use proofing agents which contain paraffin. Add proofing agents to

compartment §.

Starch

Liquid starch, starch formulations, viscous liquid starch, starch

Only use liquid detergent

Only use powder detergent or detergent specifically designed for washing

curtains

* Powder detergent, tablet detergent, liquid detergent and liquid tab detergent.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

The right amount to dispense will

depend on the following:

Water softener

A water softener can be used to cut

down on the use of detergents in hard

water areas. Dispense according to the

amount specified on the packaging.

First add detergent and then the water

softener.

– The quantity of the laundry

– The soiling level of the laundry

Lightly soiled

No visible dirt or stains. Possibly

slight body odour.

Miele branded water softening tablets

are available from the Miele Spare Parts

Department or via the internet on

www.miele-shop.com.

Normally soiled

Visibly dirty and/or just a few slight

stains.

Heavily soiled

Use a quantity of detergent as for soft

water.

Stains and soiling clearly visible.

– The water hardness level.

Check with your local water supplier

if you do not know the hardness level

in your area.

Miele do not recommend connecting

the machine to a household water

softener.

Washing with several

components

If you wash using several components

(e.g. special application detergents),

we recommend always dispensing the

agents into compartment j in the

following order:

1. Detergent

2. Water softener

3. Stain remover

This way the agents are distributed

more evenly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Detergent

Fabric conditioners and liquid

starch

If starching frequently, thoroughly

clean the dispenser compartment,

especially the siphon tube and

fabric conditioner channel, regularly.

See "Cleaning the detergent

dispenser drawer". Do not use

powder starch formulations or

viscious liquid starch in the §

compartment as it will clog up. See

below.

Fabric conditioners make garments soft

to handle and help prevent static cling

when tumble drying.

Starch stiffens and gives body to items

of laundry, e.g. shirts, tablecloths and

bed linen.

Automatic dispensing of fabric

conditioner or liquid starch to

laundry at the end of a programme

Adding fabric conditioner or starch

separately

^ Dispense in accordance with

manufacturer's instructions on the

packaging.

^ Add powder or viscose starch to

compartment i.

^ Add the fabric conditioner or liquid

starch to compartment §.

^ Turn the programme selector to

Starch.

^ Select a spin speed or the Rinse hold

extra option.

^ Add the fabric conditioner or liquid

starch to compartment §. Do not

exceed the maximum level mark.

^ Press the Start/Stop button.

Colour run and dye removers/

dyes

It will be automatically dispensed in the

last rinse. At the end of the programme

a small amount of water remains in the

fabric conditioner compartment §.

^ Do not use colour run or dye

removers in this machine.

^ Dyes suitable for use in domestic

washing machines can be used.

However, please note that the salt

used in the dyeing process can

cause corrosion to stainless steel

components in the machine if you

dye frequently. Follow the

manufacturer's instructions carefully.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Extra cleaning

,^{Disconnect the machine from the}

mains electricity supply and

Carry out a hot wash (70°C or above)

with powder detergent approx. every 6

weeks to help prevent deposits building

up in the machine. These can occur

when washing is mainly done at low

temperatures, and also lead to

withdraw the plug from the socket

before cleaning the machine.

,^{The washing machine must not}

be hosed down.

unpleasant smells. If you have no

reason to wash occasionally at this high

temperature, then run a Cottons 95°C

programme with detergent but no

laundry at regular intervals.

A range of Miele branded cleaning and

conditioning agents are available to

order from your Miele dealer, the Miele

Spare Parts Department, or via the

internet on www.miele-shop.com

Cleaning the detergent

dispenser drawer

External casing and fascia

panel

Remove detergent residues regularly.

Clean the casing using a Miele E-Cloth,

or with a mild non-abrasive cleaning

agent or soap and water using a well

wrung-out cloth. Wipe dry with a soft

cloth.

^ The drum and any stainless steel

outer panels can be cleaned using a

suitable proprietary stainless-steel

cleaning agent following the

manufacturer's instructions on the

packaging.

^ Pull out the detergent dispenser

drawer until a resistance is felt. Press

down the release catch and at the

same time pull the drawer right out of

the machine.

,^{Do not use solvents, abrasive}

cleaners, glass cleaners or

all-purpose cleaning agents.

These might damage plastic

surfaces and other components

because of the chemicals they

contain.

^ Clean the detergent drawer with

warm water.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the detergent dispenser

drawer housing

^ Clean the siphon.

1. Remove the siphon from

^ Use a bottle brush to remove

detergent residues and limescale

from the jets inside the detergent

dispenser drawer housing.

compartment § and rinse under

warm running water. Clean the

siphon tube in the same way.

2. Replace the siphon.

Descaling the machine

If starching frequently, thoroughly

clean the siphon and siphon tube

regularly. A build-up of starch will

cause them to get clogged.

If the correct amount of detergent is

dispensed, the machine should not

need to be descaled. If, however, you

do wish to descale the machine only

use proprietary non-corrosive descaling

agents and strictly observe the

instructions on the packaging.

Download from Www.Somanuals.com. All Manuals Search And Download.

Cleaning and care

Cleaning the filter in the water

inlet

^ First turn off the stopcock.

^ Unscrew the threaded union

connecting the free end of the inlet

hose to the stopcock.

The washing machine has a filter to

protect the water inlet valve.

The accessible filter in the union in the

open end of the inlet hose should be

checked every six months, or more

often if there are frequent interruptions

to the external water supply.

^ Remove the rubber seal 1 from the

recess.

^ Using pointed pliers, take hold of the

plastic filter bar 2 and remove.

^ Clean the plastic filter.

^ Put the filter and seal back in the

reverse order and reconnect the

hose.

Turn on the stopcock and check the

connection is watertight. If water drips

out, tighten the connection.

Never forget to put the filter back in

place after cleaning.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

With the help of the following notes, minor faults in the performance of the

machine, some of which may result from incorrect operation, can be put right

without contacting the Service Department.

,^{Repair work to electrical appliances should only be carried out by a}

suitably qualified person in strict accordance with current local and national

safety regulations. Repairs and other work by unqualified persons could be

dangerous. The manufacturer cannot be held liable for unauthorised work.

The programme does not start

Problem

Possible cause

Remedy

Check whether

The display remains

dark and the

There is no power to

the machine.

– the mains plug is plugged

in and switched on.

programme selector is

not lit up.

– the fuse or circuit breaker

has tripped.

You are asked to enter Access via a code has Enter the code and confirm

a code.

been activated.

the entry. Deactivate the

code if you do not wish this

message to appear in the

display the next time the

machine is switched on.

The display is dark.

The display has

switched off

Press a button. Standby

comes to an end.

automatically to save

energy (Standby

mode).

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Fault messages in the display

Problem

Possible cause

Remedy A

Fault

– The water outlet is

blocked or

– Clean the drain filter and

the drain pump.

Check drainage

system

restricted.

– The maximum delivery

head is 1 m.

– The drain hose has

been fixed too high.

Fault

The water inlet is

Check whether

Water intake

Open stopcock

blocked or restricted.

– the stopcock is opened

properly.

– the inlet hose is kinked.

Waterproof system

activated

;

The water protection

system has reacted.

Call the Service

Department.

Close the stopcock

Technical fault.

Call the Service

Department

There is a fault.

Start the programme again.

If the fault message

appears again, contact the

Service Department.

The following flashes in

the display:

Excessive foam has

built up during

washing.

Use less detergent next

time and follow the

Anti-crease

manufacturer's instructions

on dosage given on the

packaging.

alternately with

Check detergent

ATo switch off the fault message: Switch the machine off with the I-On/0-Off

button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Problems with the load size indicator or calibrating to zero

Problem

Possible cause

Remedy

The display indicates There was already

a load of <25% or no laundry in the drum

load size is indicated when the machine

^ To recalibrate the sensor to the

zero setting:

– Remove the laundry from the

drum.

when the drum is

full.

was switched on.

This has decalibrated

the sensor from the

zero setting.

– Switch off the washing

machine and leave the door

open.

– Switch on the washing

machine.

– Turn the programme selector

to the Cottons position.

– Press and hold the Load/

Detergent button pressed in

until the following message

appears in the display:

Zero setting

OK.

The display indicates The load size sensor Rotate the drum once. If the

a load greater than has been display still indicates a load

<25% when the drum decalibrated from the greater than <25%, recalibrate

is empty.

zero setting.

the sensor to zero again (see

above section).

The fault message:

The drum door is

closed.

– Open the drum door.

Zero setting

not possible

– Switch off the washing

machine and leave the door

open.

appears in the

display.

– Switch on the washing

machine.

– Try and recalibrate to zero

again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

General problems

Problem

Possible cause

Remedy

The machine shakes

during the spin cycle.

The machine feet are not Level the machine (see

level. "Installation).

The laundry has not

The machine detected an Include both large and

been spun properly and imbalance during the final small items in the load as

is still wet.

spin and reduced the

this will give better

spin speed automatically. distribution.

The laundry has not

The spin speed selected Select a higher spin

been spun satisfactorily. was too low.

speed next time.

The pump makes

strange noises.

This is not a fault! These noises occur at the end of

a pump sequence as a normal part of the operation.

There is a lot of

The water pressure is too – Clean the water inlet

detergent residue in the low.

detergent drawer.

filter.

– Select Water plus.

Powder detergent used

Add washing powder

with water softeners can and then add the water

be sticky.

softener.

Fabric conditioner is not The siphon tube is not

Clean the siphon, (see

completely dispensed or correctly positioned, or is “Cleaning and care" -

too much water remains clogged up.

"Cleaning the detergent

dispenser drawer”).

in the § compartment.

The display is in a

different language.

A different language has Set the language you

been selected in Settings want. The flag symbol

Language J.

will guide you.

When laundry is dry it

feels hard to the touch.

Too vigorous wash

action.

Programme in gentle

action and more water.

Not enough detergent

used.

Increase detergent dose

to prevent limescale

build up in laundry.

No fabric conditioner

used.

Use fabric conditioner in

last rinse.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

An unsatisfactory wash result

Problem

Possible cause

Remedy

Liquid detergent

does not give the

required result.

Liquid detergents

usually contain no

bleaching agents.

They do not remove

fruit, coffee and tea

stains.

– Use a general purpose

detergent containing a

bleaching agent.

– Pour stain removers into

compartment j of the

dispenser drawer and liquid

detergent into a dispenser ball.

– Never put stain removers and

liquid detergent together in the

dispenser drawer.

Grey, greasy

Insufficient amounts of – Use more detergent.

detergent were used

particles cling to

washed laundry.

– Before washing the next load

to break down the

run a Cottons 95°C programme

with powder detergent but

without a load.

particles of grease in

heavily soiled laundry.

A stale smell is in

the drum and on

laundry.

Low temperature

washing.

– Before washing the next load

run a Cottons 95°C programme

with powder detergent but

without a load.

White residues

which look like

powder detergent

are seen on dark

textiles after

The detergent

– Try and brush off the residues

with a soft brush once the

laundry is dry.

contained compounds

(zeolites) to aid water

softening which are

not soluble in water.

They have ended up

on the laundry.

– Wash dark textiles using a

detergent which contains no

zeolites. Liquid detergents

usually contain no zeolites.

washing.

– Use the Dark garments

programme.

Clothes are coming Programme was

– Reduce quantity of clothes in

drum.

out creased.

overloaded.

The wrong

– Check care labels and the

programme chart.

programme was used.

– Use easy iron conditioners.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

The door will not open

Possible cause

Remedy

The machine is not

connected to the

Insert the plug in the socket and switch on and/or

switch the machine on with the I-On/0-Off button.

electricity supply and/or is

not switched on.

The safety lock has been

activated.

Deactivate the safety lock as described in

"Changing the programme sequence - Safety

lock".

Access via a code has

been activated.

Deactivate the code as described in "Settings

menu".

Power cut.

Open the drum door as described in the next

section.

The door was not correctly Press hard against the lock side of the drum door

engaged.

and then press the Door button.

There is still water in the

drum and the machine is

unable to drain.

Clean the drain filter and drain pump as described

in the next section.

For safety reasons the drum door cannot be opened if the suds temperature is

higher than 55°C.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Opening the drum door in the

event of a blocked drain outlet

and/or power failure

Blocked drain outlet

If the drain outlet is blocked, up to

25 litres of water will be retained in the

machine.

^ Switch the washing machine off.

There is a lever behind the detergent

drawer fascia panel.

,^{Caution: if laundry has been}

washed at a high temperature, water

draining out of the machine will still

be hot. Danger of scalding!

Procedure for draining the machine

^ Place a suitable container under the

access flap.

When draining water from the

machine, do not unscrew the drain

filter completely or take it right out.

^ Remove the lever.

^ Unscrew the drain filter lid until water

runs out.

To interrupt the flow of water:

^ Use it to open the access flap.

^ Tighten the drain filter back up again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem solving guide

Once the flow of water ceases:

,^{Make sure the drain filter is}

securely tightened. Otherwise there

is a risk of water leakage during use.

Opening the drum door

,^{Always make sure that the drum}

is stationary before reaching into the

machine to remove laundry.

Reaching into a moving drum is

extremely dangerous.

^ Remove the drain filter completely.

^ Clean it thoroughly.

^ Pull the emergency release

downwards (see illustration). The

drum door will open.

^ Remove any foreign objects (e.g.

buttons, coins, etc.) and fluff from the

filter housing. Turn the impeller by

hand to check that it rotates freely.

Any foreign object causing an

obstruction should be removed.

^ Put the drain filter back in place and

secure.

Download from Www.Somanuals.com. All Manuals Search And Download.

After sales service

In the event of any faults which you

cannot remedy yourself, please

contact:

Future updates (PC)

The indicator light marked PC is the

interface used by Miele service

technicians during servicing work for

testing purposes and for updating the

machine's programme data.

– your Miele Dealer or

– the Miele Customer Contact Centre

(see back cover for contact details).

When contacting your Dealer or Miele,

please quote the model and serial

number of your machine, both of which

are shown on the data plate visible

above the porthole glass when the door

is open.

Appliance guarantee

Please see the guarantee card

supplied with your machine.

Optional accessories

Optional accessories for this washing

machine are available from your Miele

Dealer, the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

Please note that telephone calls may

be monitored and recorded for

training purposes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Front view

aInlet hose with "Waterproof" system

hDetergent dispenser drawer

bElectricity supply cable

iDrum door

c - f Flexible drain hose (with

detachable swivel elbow)

jAccess to drain filter, drain pump

and emergency release

gControl panel

kHandle recesses for moving the

machine

lFour height adjustable feet

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Rear view

aProtruding lid for holding when

moving the machine

eTransit bar covers

fRestraining clip for inlet hose and

drain hose

bElectricity supply cable

cInlet hose with "Waterproof" system

dDrain hose

gRestraining clips for transit bars

when removed

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Installation surface

Installing the washing machine

A concrete floor is the most suitable

installation surface for a washing

machine, being far less prone to

vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

To manoeuvre the machine out of its

packing case to its installation site hold

it by the edge of the lid where it

protrudes to the rear of the washing

machine as well as by the handle

recesses at the front.

Please note the following points:

,^{Ensure that the machine feet and}

the floor are dry to prevent the

machine from slipping during the

spin cycle.

^ The machine must be level and

securely positioned.

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

Removing the transit bars

If installing on a wooden joist floor:

^ We recommend a plywood base

(at least 59x52x3 cm). The base

should span several joists and be

bolted to the joists and not only to the

floorboards. Check for the presence

of pipes and cables.

If possible, install the machine in a

corner, as this is usually the most stable

part of the floor.

,^{If the machine is installed on a}

raised plinth, it has to be secured

against slippage during spinning

using retaining clips (available from

the Miele Spare Parts Dept).

^ To remove the left and right covers

1. Use a screwdriver to prise out the

cover as illustrated.

2. Pull the cover forwards to remove.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

^ Using the spanner supplied turn the

^ Turn the right-hand transit bar 90°,

left-hand transit bar 90°, then

then

^ withdraw the transit bar.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

,^{To avoid the risk of injury the}

holes for the transit bars must be

covered after the transit bars have

been removed.

^ Secure the transit bars to the back of

the washing machine. Make sure that

holes b are fitted over retainers a.

,^{The washing machine must not}

be moved without the transit bars in

place.

^ Fit the covers on to the two holes.

Then plug the holes as shown with

the caps.

Store the transit bars as shown or

keep them in a safe place for future

use. They must be re-fitted if the

machine is to be moved again

(e.g.when moving house).

Re-fitting the transit bars

Re-fitting is carried out by reversing the

procedure.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Levelling the machine

The machine must stand perfectly level

on all four feet to ensure safe and

proper operation.

Incorrect installation may increase

electricity and water consumption and

may cause the machine to move about.

Screwing out and adjusting the feet

The four adjustable screw feet are used

to level the machine. All four feet are

screwed in when the machine is

delivered.

^ Use a spirit level to check the

machine is standing level.

^ Hold foot 1 securely with a pipe

wrench. Turn counter nut 2 again

using the spanner supplied until it

sits firmly up against the housing.

,^{All four counternuts must be}

firmly up against the housing. Please

also check this for the feet which did

not need adjustment. Otherwise

there is the danger of the machine

moving about.

^ Using the spanner supplied turn

counter nut 2 in a clockwise

direction. Then turn counter nut 2

together with foot 1 to unscrew.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Washer and Dryer stack

The fitting of building under kits and

stacking kits must only be

undertaken by qualified and

competent persons, in accordance

with the instructions supplied with

the kit.

A Miele tumble dryer can be stacked

with the washing machine. A "WTV"

stacking kit* is necessary and can be

purchased from the Miele Spare Parts

Department or via the internet at

www.miele-shop.com.

Building under a continuous

worktop/in a kitchen run

Please note

If you wish to push your machine under

a worktop and there is space to do this

without removing the lid, the

conversion kit is not necessary.

Otherwise the conversion kit is

essential.

– A special building under conversion

kit* is required.

To ensure electrical safety, the

washing machine lid must be

replaced by the cover plate supplied

with the conversion kit.

– For installation under a work surface

900/910 mm from the floor, a raising

kit* is required.

a Safety distance to wall:

– Connections for electricity, water and

drainage should be installed in such

a way that they remain accessible

when the machine is in place.

at least 2 cm

b Height:

Stacking kit with pull-out shelf:

approx. 169 cm

Fitting instructions are supplied with the

conversion kit.

Stacking kit without pull-out shelf:

approx. 170 cm

All parts marked* are available from

your Dealer or the Miele Spare Parts

Department.

Replacing the lid

If the lid has been removed in order to

fit a stacking kit or cover plate, ensure

that, if the lid is replaced, it fits securely

into the rear holders. Otherwise, it is not

properly secure for transport.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

The Miele Waterproof system

2) Electronic unit and washing

machine housing

The Miele Waterproof system protects

the washing machine from water

damage.

– Sump

Any leaking water is collected in a

sump in the base of the machine. A

float switches off the safety valves,

preventing any more water from

flowing into the machine and water in

the suds container is pumped away.

The system consists of three main

components:

1) the inlet hose

2) the electronic unit and the washing

machine housing

– Overflow protection

3) the drain hose

This prevents the washing machine

taking in too much water. If the water

level exceeds a certain level, the

drain pump switches in and pumps

the excess water away.

1) Inlet hose

– The inlet hose is fitted with an

additional electrical safety valve

which works like an automatic

stopcock and is housed in the inlet

hose connection box.

3) Drain hose

The drain hose is protected by a

ventilation system which prevents the

washing machine from being

emptied completely.

– It is pressure tested to between

7,000 and 10,000 kPa.

– The inlet hose has a protective

sleeve.

Any leaking water from the inlet hose

is fed into the sump through this

protective sleeve. A float switches off

the safety valve, preventing any

more water from flowing into the

machine and water in the suds

container is pumped away.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the water supply The machine should be connected to

the mains water supply in accordance

,^{The plastic casing of the safety}

valve contains electrical

with local and national safety

regulations. The German authorities do

not require it to have a non-return valve

as the washing machine has been

designed to comply with DIN

regulations.

components. The Waterproof system

must only be connected to its own

stopcock. It must not be connected

to mixer taps or similar and must not

be fitted in areas where there is the

risk of water or other liquids

reaching it.

The machine is designed to operate

with a flow pressure of between 100

and 1,000 kPa (1-10 bar). If it is higher

than 1,000 kPa it is essential to fit a

pressure reducing valve.

Connection to the mains water supply

should incorporate a mains stopcock

with ³/₄" thread. The stopcock should

be fitted by a qualified plumber.

,The connection point is subject

to mains water pressure. Turn on the

stopcock slowly and check for leaks.

Correct the position of the washer

and union if appropriate.

Do not get wet.

The washing machine is not suitable

for connection to a hot water supply

and connection to a household

water softener is not recommended.

The protective sleeve of the hose

must not be damaged or kinked.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Maintenance and care

If you intend to unscrew the Miele

Waterproof system hose from the

stopcock it is essential to disconnect

the machine from the electricity supply

first.

Only use a Miele Waterproof system

hose should you need a replacement.

In order to protect the water inlet

valve, the dirt filter in the water inlet

valve connection must not be

removed.

Extension hose

A 1.5 metre long (metal) extension hose

is available from your Miele dealer or

the Miele Spare Parts Department as an

optional extra.

This hose is tested to withstand

pressures of up to 14,000 kPa and can

be used as a flexible extension to the

water supply.

N.B. Using this hose renders the

Waterproof system safety valve on the

inlet hose ineffective.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Connection to the drainage

system

Please note:

The machine drains via a drain pump

with a delivery head of 1 metre*. The

drain hose must not be kinked as this

restricts drainage. The swivel elbow at

the end of the hose can be turned in

either direction, or can be detached if

required, with a sharp twist and pull.

If required, the drain hose can be

extended to a length of 5 m. The

necessary parts can purchased from

the Miele Spare Parts Department or

your Miele dealer.

aAdapter

* For a delivery head of more than 1 m

(up to a max. of 1.8 m) a second

bNut

cHose clip

dEnd of the hose

duo-drain pump is available with the

corresponding kit from the Miele Spare

Parts Department or your Miele Dealer.

^ Fit adapter a to the sink drain outlet

using nut b.

Drain hose connection:

1. Direct into a sink or basin:

Please note the following:

^ Attach the end of the hose d to

adapter a.

^ Use a screwdriver to tighten hose

– Hook the hose over the edge and

secure.

clip c up close to the nut.

– Make sure that the water can drain

away freely without hindrance.

Otherwise there is a risk of water

overflowing or of some of the drained

water being sucked back into the

machine.

2. Connected securely to a plastic

drain pipe with a rubber nipple.

There is no need to use a non-return

valve.

3. Connected securely to a standpipe.

4. Connected securely to a floor gully.

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation and connection

Electrical connection U.K.

Non-rewireable plugs BS 1363

All electrical work should be carried out The fuse cover must be refitted when

by a suitably qualified and competent

person, in strict accordance with

current national and local safety

regulations (BS 7671 in the UK).

changing the fuse, and if the fuse cover

is lost, the plug must not be used until a

suitable replacement is obtained. The

colour of the correct replacement cover

is that of the coloured insert in the base

of the plug, or the colour that is

Ensure power is not supplied to the

appliance until after installation work

has been carried out.

embossed in words on the base of the

plug (as applicable to the design of

plug fitted).

The appliance is supplied with a mains

cable with moulded plug ready for

connection to a 230-240V mains

supply.

Replacement fuses should be ASTA

approved to BS 1362 and have the

correct rating. Replacement fuses and

fuse covers may be purchased from

your local electrical supplier.

Please ensure the connection data

quoted on the data plate match the

household mains supply.

WARNING: THIS APPLIANCE

MUST BE EARTHED

Connection should be made via a

suitable switched socket which is easily

accessible after installation.

For extra safety it is advisable to install

a suitable residual current device

(RCD). Contact a qualified electrician

for advice.

Do not connect via an extension lead.

Extension leads do not guarantee the

required safety of the appliance (e.g.

danger of overheating).

Download from Www.Somanuals.com. All Manuals Search And Download.

Consumption data

Load

Consumption data

Water Duration

Energy

in kWh

1.99

in litres

Short

Normal

Cottons

95°C

6.0 kg

3.0 kg

6.0 kg

3.0 kg

2.0 kg

3.5 kg

2.0 kg

3.0 kg

6.0 kg

3.0 kg

2.0 kg

1 pillow

1.0 kg

2.0 kg

2 h 09 min

1 h 49 min

60°C

1.02

0.73

1 h 03 min

40°C

0.65

2 h 04 min

0.36

59 min

Minimum iron

Delicates

Woollens /

Automatic

Shirts

0.50

59 min

1 h 19 min

59 min

30°C

40°C

60°C

40°C

60°C

40°C

60°C

30°C

40°C

0.35

49 min

0.23

–

39 min

0.35 - 0.50

1.00

40-55

–

1 h 18 min

1 h 12 min

30 min

1 h 02 min

Express

0.30

–

Denim

0.50

50 min

1 h 00 min

2 h 20 min

1 h 15 min

55 min

Hygiene

1.40

–

Dark garments

Curtains

0.60

1 h 05 min

0.45

–

Pillows

0.80

–

1 h 20 min

36 min

Silks /

0.25

–

Sportswear

Outerwear

Proofing

0.35

47 min

53 min

–

1 h 07min

1 h 03 min

29 min

0.45

0.30

Notes for test institutes:

EN 60456 test programme

Short programme for test institutes; the Short extra option must be selected.

Consumption data can vary from the nominal values given depending on water

pressure, water hardness, water inlet temperature, room temperature, type and

volume of load, fluctuations in the electricity supply and any extra options

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Height

850 mm

595 mm

580 mm

975 mm

94 kg

Width

Depth

Depth with door open

Weight

Maximum floor load

Capacity

1600 Newton (approx. 160 kg)

6 kg dry laundry

see data plate

see data plate / plug

see "Consumption data"

100 kPa (1 bar)

1000 kPa (10 bar)

1.60 m

Voltage

Connected load

Fuse rating

Consumption data

Water flow pressure minimum

Water flow pressure maximum

Inlet hose length

Drain hose length

Mains connection cable length

Delivery head max.

Maximum drainage length

LEDs

1.50 m

1.60 m

1.00 m

5.00 m

Class 1

Test certificates awarded

see data plate

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

for changing default settings

The Settings menu can be used to alter the machine's electronics to suit

changing requirements.

Settings can be altered at any time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

To open the Settings menu

Time (of day)

^ Connect the machine to the

First select either a 24 hour or 12 hour

clock. You can then set the current time

of day.

electricity supply.

^ Switch on the washing machine.

^ Press both menu buttons at the same

time until the following appears in the

display:

Clock format

^ Select the clock format you want with

the left hand Menu button under

Continue, and confirm your selection

with the right hand Menu button

under OK.

Settings

Language !

Continue

Set the time of day

You are now in the Settings menu.

^ Select the Set the time of day

sub-menu and use the Menu buttons

to set the time.

^ Select the setting you want with the

left hand Menu button under

Continue, and confirm your selection

with the right hand Menu button

under OK.

Language F

The display can be set to appear in

one of several different languages.

You can select the language you want

via the Language sub-menu.

The flag after the word Language acts

as a guide to prevent a language which

will not be understood from being set.

A tick L will appear beside the

language to show that it has been set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

Gentle action

Suds cooling

Activating gentle action reduces the

drum action and is suitable for

When this is activated, additional

water flows into the drum at the end

of the main wash to cool the suds

down. Hot suds can damage plastic

drainage pipes.

washing slightly soiled items more

gently. It should be activated for

garments with a single bar under the

care label and for articles which feel

too hard after they have been dried.

Suds cooling takes place when

temperatures of 95°C and 75°C are

selected.

Gentle action can be activated for the

Cottons and the Minimum iron

programmes.

Suds cooling should be activated:

– to prevent the danger of scalding if

the drain hose is hooked over the

edge of a sink or basin.

The machine is delivered with the

Gentle action setting deactivated.

A tick L will appear beside the option

– where the drainage pipes do not

comply with DIN 1986.

to show that it has been set.

The machine is delivered with Suds

cooling deactivated.

Longer pre-wash

The pre-wash for the Cottons

programme can be extended by 6, 9

or 12 minutes.

A tick L will appear beside the option

to show that it has been set.

The default setting for the pre-wash is

25 minutes.

If you require a longer pre-wash, it can

be extended.

A tick L will appear beside the option

to show that it has been set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

Lock code

The code prevents your machine

being used without your knowledge.

1 2 5

When the code has been activated, you

have to enter a code after switching the

washing machine on. Otherwise the

washing machine cannot be operated.

Back A

^ Confirm the code by pressing the

right hand Menu button under OK or,

if you have made a mistake, press

the left hand Menu button under

Back ^A.

To activate the Lock code

Lock code

The following will appear in the display:

Activate

Continue

Lock code activated.

Entry OK

^ Press the right hand Menu button

under OK.

Once the machine is switched off, it

can only be used again if the code is

entered.

^ The display will now request that a

code is entered. The code is 125 and

cannot be altered.

To use the washing machine when

the code is activated

To enter the Lock code

Lock code

When the machine is switched on

again, the display will request the code.

0 0 0

^ Enter code 125 as described above

and confirm the entry.

^ Enter the first number with the left

hand Menu button under *. Confirm

your selection of this number by

pressing the right hand Menu button

under OK. Now enter the second

number.

The washing machine is now unlocked

and ready for use.

To deactivate the Lock code

Proceed as for activating the code.

^ Repeat the process until all three

numbers have been entered.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

Temperature unit

Keypad tone

You can chose for the temperature to

be displayed in °C/Celsius or

°F/Fahrenheit.

An audible tone sounds each time a

button is pressed.

The machine is delivered with the

keypad tone switched off.

A tick L will appear beside the option

to show that it has been set.

A tick L will appear beside the option

Buzzer

to show that it has been set.

An audible tone sounds repeatedly at

the end of a programme and when

Rinse hold is reached.

Brightness

There are ten different display

brightness settings.

There are two volumes:

The machine is delivered with the

display brightness on setting 5.

Off

(default setting)

The buzzer is switched off.

This will change as soon as a different

setting is chosen.

Contrast

Normal

The buzzer sounds at the end of a

programme or when Rinse hold is

reached.

There are ten different display

contrast settings.

The machine is delivered with the

display contrast on setting 5.

Loud

The buzzer sounds at maximum volume

Loud at the end of a programme or

when Rinse hold is reached.

This will change as soon as a different

setting is chosen.

A tick L will appear beside the option

to show that it has been set.

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings menu

Standby display

When this programme is chosen again

these settings will appear in the

display.

To save energy, the display goes out

and the indicator light for the Start/

Stop button will start flashing slowly.

The machine is delivered with the

memory function deactivated.

The display will always go out,

Anti-crease

– if a programme is not selected within

10 minutes of the machine being

switched on.

Anti-crease helps prevent creasing if

laundry is not normally removed im-

mediately after the end of a

programme.

– 10 minutes after the end of a

programme.

Pressing one of the buttons switches

the display back on again.

The drum will turn at intervals for up to

30 minutes after the programme has

finished. The door can be opened and

laundry removed at any time during the

anti-crease phase.

You can also choose whether you want

the display to go out 10 minutes after a

programme has started or to remain

visible throughout the programme.

(the machine is delivered with this

option selected)

The standby function is switched on.

When this option is selected, the

display will go out 10 minutes after a

programme has started.

Anti-crease is activated.

Off

Not in current programme

Anti-crease is deactivated.

(the machine is delivered with this

option selected)

To close the Settings menu

The standby function is switched off.

The display will remain visible during a

programme.

Settings

Back A

Continue

Memory

^ Press the right hand Menu button

under OK.

If an extra option has been selected

for a programme, or the

recommended temperature or spin

speed has been altered, the machine

will store the changes in memory at

the start of a programme.

Download from Www.Somanuals.com. All Manuals Search And Download.

Alteration rights reserved/1508/W 3923 WPS

M.-Nr. 07 170 860 / 01

Download from Www.Somanuals.com. All Manuals Search And Download.

Milan Technology Switch MIL SM4804G User Manual
MTD Lawn Mower TMO 37463A User Manual
National Instruments Network Card NI 9225E User Manual
Nikon Scanner 5000 ED User Manual
Nilfisk Advance America Vacuum Cleaner AERO 20 User Manual
Nostalgia Electrics Blender MSB 500 User Manual
Nostalgia Electrics Frozen Dessert Maker SCM 802 User Manual
NuTone Dollhouse 9810 User Manual
Oreck Vacuum Cleaner XL3600HH User Manual
Panasonic Flat Panel Television GPH5D User Manual