Miele Ventilation Hood DA5341D User Manual

Operating and Installation  
Instructions  
Ventilation System  
DA 5341 D  
en - US, CA  
To prevent accidents  
and machine damage,  
read these instructions  
before  
installation or use.  
M.-Nr. 07 262 380  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Read these Operating Instructions carefully before installing or  
using the Ventilation System.  
This appliance is designed to vent  
~
This appliance is intended for  
residential use only. Use the  
appliance only for its intended  
purpose. The manufacturer cannot  
be held responsible for damages  
caused by improper use of the  
hood.  
cooking smoke and odors only.  
Be certain your appliance is  
~
properly installed and grounded by a  
qualified technician.  
To guarantee the electrical safety of this  
appliance, continuity must exist  
between the appliance and an effective  
grounding system. It is imperative that  
this basic safety requirement be met. If  
there is any doubt, have the electrical  
system of the house checked by a  
qualified electrician. The manufacturer  
cannot be held responsible for  
damages caused by the lack, or  
inadequacy, of an effective grounding  
system.  
This appliance complies with current  
safety requirements. Improper use  
of the appliance can lead to  
personal injury and material  
damage.  
READ AND SAVE THESE  
INSTRUCTIONS  
Before connecting the appliance to  
~
the power supply make sure that the  
voltage and frequency listed on the  
data plate correspond with the  
household electrical supply. This data  
must correspond to prevent machine  
damage. If in doubt consult a qualified  
electrician.  
CAUTION  
For General Ventilating Use Only.  
Do not use to exhaust hazardous or  
explosive materials and vapors.  
Installation work and repairs should  
~
only be performed by a qualified  
technician in accordance with all  
applicable codes and standards.  
Repairs and other work by unqualified  
persons could be dangerous and the  
manufacturer will not be held  
responsible.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
This equipment is not designed for  
Use  
~
maritime use or for use in mobile  
installations such as recreational  
vehicles or aircraft. However, under  
certain conditions it may be possible for  
an installation in these applications.  
Please contact the nearest Miele dealer  
or the Miele Technical Service  
Do not allow children to play with or  
~
operate the appliance or its controls.  
Supervise its use by the elderly or  
infirm.  
Do not flambé or grill with an open  
~
flame beneath the hood.  
Department with specific requirements. Flames could be drawn up into the  
hood by the suction and the grease  
filters may catch fire.  
WARNING - TO REDUCE THE RISK  
OF FIRE, ELECTRIC SHOCK, OR  
INJURY TO PERSONS, OBSERVE  
THE FOLLOWING:  
Never operate gas burners without  
~
cookware. Turn the burner off when not  
in use. Adjust the burner so that the  
flames do not extend beneath the  
cookware. Do not overheat the  
cookware, e.g. when using a wok. The  
hood can be damaged due to  
excessive heat from the burners and  
the cookware.  
Use this unit only in the manner  
~
intended by the manufacturer. If you  
have questions, contact the  
manufacturer.  
Before servicing or cleaning the unit,  
~
switch power off at the service panel  
and lock the service disconnecting  
means to prevent power from being  
switched on accidentally. If the service  
disconnecting means cannot be  
locked, securely fasten a prominent  
warning device, such as a tag, to the  
service panel.  
Do not use the hood without the  
~
grease filter in place.  
Clean the grease filter regularly.  
~
Dirty filters are a fire hazard.  
Do not use a steam cleaner to clean  
~
the hood. Steam could penetrate  
electrical components and cause a  
short circuit.  
Before discarding an old appliance,  
~
disconnect it from the power supply  
and remove the power cord to prevent  
hazards.  
Always turn on the hood when using  
~
the cooktop to prevent damage from  
condensation.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
, WARNING - TO REDUCE  
THE RISK OF A COOKTOP  
, WARNING  
TO REDUCE THE RISK OF INJURY  
TO PERSONS, IN THE EVENT OF A  
COOKTOP GREASE FIRE, OBSERVE  
THE FOLLOWING:  
GREASE FIRE:  
Never leave surface units  
~
unattended at high settings. Boilovers  
cause smoking and greasy spillovers  
may ignite. Heat oils slowly on low or  
medium settings.  
SMOTHER FLAMES with a close  
~
fitting lid, cookie sheet, or metal tray  
then turn off the burner.  
BE CAREFUL TO PREVENT BURNS.  
If the flames do not go out immediately,  
EVACUATE AND CALL THE FIRE  
DEPARTMENT.  
Always turn the hood on when  
~
cooking at high heat.  
Clean ventilating fans frequently.  
~
Grease should not be allowed to  
accumulate on fan or filter.  
NEVER PICK UP A FLAMING PAN  
~
- You may be burned.  
Use proper pan size. Always use  
DO NOT USE WATER, including  
~
~
cookware appropriate for the size of the  
surface element.  
wet dishcloths or towels - a violent  
steam explosion will result.  
Use a fire extinguisher  
~
ONLY if:  
– You have a class ABC extinguisher,  
and you know how to operate it.  
– The fire is small and contained in the  
area where it started.  
– The fire department is being called.  
– You can fight the fire with your back  
to an exit.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
Never connect an exhaust hood to  
~
an active chimney, dryer vent, vent flue,  
, WARNING  
~
To reduce the risk of fire only use  
or room ventilating ductwork. Seek  
professional advice before connecting  
an exhaust hood vent to an existing,  
inactive chimney or vent flue.  
metal ductwork.  
Any fittings, sealant, or materials  
~
used to install the ductwork must be  
made of approved non-flammable  
materials.  
WARNING - TO REDUCE THE RISK  
OF FIRE, ELECTRIC SHOCK, OR  
INJURY TO PERSONS, OBSERVE  
THE FOLLOWING:  
Provided a larger distance is not  
~
given by the manufacturer of the  
cooktop, follow the minimum safety  
distances between a cooktop and the  
bottom of the hood:  
Installation work and electrical  
~
wiring must be done by qualified  
person(s) in accordance with all  
applicable codes and standards,  
including fire-rated construction.  
– 22" (550 mm) above electric  
cooktops,  
Sufficient air is needed for  
~
– 30" (762 mm) above gas cooktops,  
combustion and exhausting of gases  
through the flue (chimney of fuel  
burning equipment to prevent back  
drafting. Follow the heating equipment  
manufacturer’s guideline and safety  
standards such as those published by  
the National Fire Protection Association  
(NFPA) and the American Society for  
Heating, Refrigeration and Air  
– 26" (650 mm) above an open electric  
grill or an open electric boiler/fryer.  
If local building codes require a greater  
safety distance, follow their  
requirement.  
If there is more than one appliance  
beneath the hood and they have  
different minimum safety distances  
always select the greater distance.  
Conditioning Engineers (ASHRAE), and  
the local code authorities.  
Do not install this hood over  
When cutting or drilling into wall or  
~
~
cooktops burning solid fuel.  
ceiling, do not damage electrical wiring  
and other hidden utilities.  
Do not use an extension cord to  
~
connect the appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance,  
(e.g. danger of overheating).  
Ducted fans must always be vented  
~
to the outdoors.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Functional description  
The ventilation hood works by air  
extraction. The air is drawn in and  
cleaned by the grease filter and  
directed outside.  
The hood comes equipped with a  
non-return flap in each chimney. This  
flap automatically closes when the  
hood is turned off so that no exchange  
of outside air and room air can occur.  
When the hood is turned on, the air  
pressure of the exhaust fan  
automatically opens the flap blowing  
the inside air and cooking odors  
outside.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the hood  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the hood  
a Cover frame  
b Chimney  
k Grease filter button  
The indicator next to the grease filter  
button lights when the grease filter  
needs to be cleaned.  
c Canopy  
This button is also used:  
– to reset the grease filter timer after  
cleaning the grease filter (see  
"Cleaning and Care").  
d Overhead lighting  
e Control panel  
– to show how long the grease filter  
has been in use (see "Operation /  
Grease filter timer").  
The two sides of the hood can be  
operated independently of one another.  
– to change the number of hours  
counted by the grease filter timer  
(see "Operation / Reprogramming the  
grease filter timer").  
f Grease filters  
g Light button  
This button turns the light on and off  
and also dims the light.  
The lighting can be used independently  
of the fan.  
h On/Off button  
i Fan power level buttons  
Four fan speed selection.  
j Delayed Shut Down  
This button activates the Delayed Shut  
Down feature. The fan can be set to  
turn off automatically after either 5 or  
15 minutes.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Automatically switching back the  
intensive power level  
The two sides of the hood can be  
operated independently of one  
another.  
The intensive level "4" can be  
programmed to automatically switch  
back to level "3" after 10 minutes.  
Turning on the fan  
^ Turn the fan and the lights off.  
^ Press the On/Off button.  
^ Press and hold the "Delay Shut down"  
button for 10 secs. The first indicator  
lights.  
The hood turns on level 2 and the  
indicator lights.  
^ Press the following buttons one after  
another,  
Selecting the power level  
^ Use the "/+" controls to select the  
desired power level.  
– light  
+ = increases the fan speed  
= decreases the fan speed  
Levels "1" to "3" (green indicators) are  
usually sufficient for normal cooking.  
– the "" button, and  
Intensive setting  
Level "4" (yellow indicator) should be  
used for a short period when frying or  
cooking food with a strong aroma.  
– the light button again.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Fan performance  
The maximum air flow capacity of the  
dual blower system is 1250 cfm  
(625 x 2 cfm). Factors such as narrow  
duct diameter and bends will affect this  
value.  
If the power level indicators "1" and "4"  
flash, the automatic switch back is not  
activated.  
Level 1 operates at 40% capacity  
Level 2 operates at 60% capacity  
Level 3 operates at 80% capacity  
Level 4 operates at 100% capacity  
^ To activate the automatic switch back  
press the "+" button.  
The power level indicators "1" and "4"  
light continuously.  
^ To deactivate press the "" button.  
^ To save the setting press the "Delay  
Shut Down" button.  
If the procedure is not stored within  
4 minutes of programming, the hood  
will automatically default to the "old"  
data.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Delayed Shut Down  
Turning off the fan  
If odors or smoke remain in the kitchen  
after cooking has been completed, the  
Delayed Shut Down feature can be  
selected to allow the hood to continue  
running for either 5 or 15 minutes. After  
that period of time the fan turns off  
automatically.  
^ Press the On/Off button to turn the  
fan off.  
The indicator goes out.  
Automatic Safety Shut Off  
The fan will turn off automatically  
10 hours after the last button was  
activated. The lighting however will  
remain on.  
^ Press the Delayed Shut Down button  
while the fan is still running.  
Press once = 5 minute delay  
(left indicator lights)  
^ Press the On/Off button to turn the  
fan back on again.  
Press twice = 15 minute delay  
(right indicator lights)  
To cancel the feature press the  
Delayed Shut Down button again. The  
fan will not turn off automatically.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Turning the lighting on/off  
Dimming the lighting  
The overhead lighting can be turned on The brightness of the lighting can be  
and off independently of the fan.  
adjusted.  
^ While the lighting is turned on, press  
and hold the light button.  
The lighting will dim until the button is  
released.  
^ Press the light button briefly to turn  
on the lighting.  
^ If the button is pressed again, the  
lighting will brighten until the button is  
released.  
The light button indicator illuminates.  
^ Press the light button briefly again to  
turn off the lighting.  
If the button is pressed continuously,  
the light will cycle between bright and  
dark.  
The light button indicator will go out.  
^ Press the light button again to turn off  
the lighting.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Grease filter timer  
Checking the grease filter timer  
A timer monitors the hours of fan  
To check the percentage of time  
already used:  
operation. The indicator for the grease  
filter will light after 30 hours of operation  
or the preselected time. The grease  
filters must then be cleaned. See  
"Cleaning and care / Grease Filter".  
After the grease filters have been  
cleaned and put back in place, the  
grease filter timer must be reset.  
^ Press the On/Off button to turn the  
fan on.  
^ Press the grease filter button.  
^ To do this, press the grease filter  
button for about 3 seconds while the  
fan is running.  
The indicator lights.  
The indicator will go out.  
The number of flashing "–/+" indicators  
show the percentage of programmed  
hours that have been used.  
1 indicator = 25 %  
2 indicators = 50 %  
3 indicators = 75 %  
4 indicators = 100 %  
This information will remain stored in  
memory in the event of a power failure.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Reprogramming the grease filter  
timer  
The grease filter timer is preset to  
30 hours. This time can be lengthened  
or shortened to 20, 30, 40 or 50 hours.  
The lit "–/+" indicator shows the  
programmed time:  
– A time of 20 hours should be  
programmed in kitchens with  
frequent pan or deep frying.  
1st indicator from the left = 20 hours  
2nd indicator from the left = 30 hours  
3rd indicator from the left = 40 hours  
4th indicator from the left = 50 hours  
– A time of 20 hours should also be  
programmed if the kitchen is only  
used occasionally to prevent grease  
which has accumulated over a long  
period of time from hardening on the  
filter, making cleaning more difficult.  
^ Use the "/+" button to select the  
desired time.  
^ Store the selection by pressing the  
grease filter button.  
^ Press the On/Off button to turn off the  
fan.  
If the procedure is not stored within  
4 minutes of programming the hood  
will automatically default to the "old"  
data.  
^ Press the Delayed Shut Down and  
grease filter button at the same time.  
The indicator for the grease filter timer  
and one of the "–/+" indicators will flash.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Stainless steel  
Before cleaning or servicing the  
hood, disconnect it from the power  
supply by either removing the fuse,  
unplugging it from the outlet or  
manually "tripping" the circuit  
breaker.  
Stainless steel surfaces can be cleaned  
using a non-abrasive stainless steel  
cleaner.  
To help prevent resoiling, a conditioner  
for stainless steel can also be used.  
Apply sparingly with even pressure.  
Cleaning the casing  
Stainless steel colored controls  
,Never use on the hood:  
These controls may become dis-  
colored or damaged if not cleaned  
regularly.  
- cleaning agents containing soda,  
acids, chlorides or thinners,  
Do not use a stainless steel cleaner  
on these controls.  
- abrasive cleaning agents  
e.g. powder or cream cleansers,  
- steel wool or abrasive sponges,  
e.g. pot scourers or sponges which  
have been previously used with  
abrasive cleaning agents,  
- limescale removers,  
- caustic (oven) cleaners.  
They will damage the surface.  
^ The exterior surfaces and controls  
can be cleaned with warm water and  
liquid dish soap applied with a soft  
sponge.  
^ Wipe dry using a soft cloth.  
Only use a slightly damp sponge  
when cleaning the controls. Water  
could penetrate into the electronics  
and cause damage.  
^ Glass surfaces can be cleaned using  
glass cleaner.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Grease filters  
Removing the grease filter  
The reusable metal grease filters  
remove solid particles from the vented  
kitchen air (grease, dust, etc).  
The grease filters should be cleaned  
every 3 - 4 weeks or whenever the  
grease filter indicator lights.  
^ To remove the grease filters pull the  
locking clip forward. Lower the filter  
45° unhook it at the rear and take it  
out. Support the grease filter so that it  
does not fall onto the cooktop.  
Keep the grease filters clean to  
prevent a fire hazard.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the grease filters  
^ By hand: use a scrub brush with a  
solution of warm water and mild  
detergent.  
Do not use the pure detergent,  
aggressive all purpose cleaners,  
oven sprays, abrasive cleaning  
agents or limescale removers. They  
could destroy the filter.  
^ If the filter is incorrectly installed,  
insert a small screwdriver into the slit  
along its edge to disengage it from  
the casing.  
^ In a dishwasher: place the filter  
vertically in the lower basket, making  
sure that the spray arm is not  
blocked.  
Use a hot temperature program,  
e.g. "Heavy Soil" or "Pots and pans".  
Use the recommended amount of  
dishwasher detergent. Overuse could  
destroy the filter.  
After cleaning and returning the grease  
filters the timer must be reset.  
^ While the fan is on, press and hold  
the grease filter control until only the  
first "-/+" indicator is flashing.  
Depending on the detergent,  
cleaning the grease filter in a  
dishwasher may cause permanent  
discoloration of the filter surface.  
Performance of the filter will not be  
affected by this discoloration.  
^ The second grease filters must also  
be reset in the same way, even if the  
timer has not yet reached its  
maximum.  
^ After cleaning, the filters can be  
placed on a towel to air dry.  
^ While the filters are removed, clean  
any dirt or grease from the interior  
casing to prevent the risk of fire.  
^ When putting the grease filter back  
make sure that the locking clip is  
facing the cooking surface.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Changing the light bulbs  
Disconnect the exhaust hood from  
the power supply by either shutting  
off the main breaker or completely  
removing the fuse.  
Note: The appliance has 2 electrical  
connections, each must be  
disconnected from the main power  
supply.  
When in use halogen bulbs become  
extremely hot, and can burn your  
hands. Do not attempt to change the  
bulbs until they have had sufficient  
time to cool.  
Do not touch the bulb surface.  
Fingerprints or body oils deposited  
on the bulb will decrease its life.  
Please follow the manufacturer’s  
instructions.  
^ To change the halogen bulb, first  
gently press the light cover. The  
cover will open and can now be  
flipped down.  
^ Pull the halogen bulb from its socket,  
then insert a new bulb.  
^ Flip the light cover back up, making  
sure it clicks into place.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales Service  
Repairs  
MieleCare  
In the event of a fault which you cannot  
easily fix yourself, please contact the  
Miele Technical Service Department.  
(USA only)  
MieleCare, our Extended Service  
Contract program, gives you the  
assurance of knowing that your  
^ When contacting the Technical  
Service Department, please quote  
the model and serial number of your  
appliance.  
appliance investment is covered by  
5 years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability, and  
longevity of your Miele appliance.  
These are shown on the data plate  
which is visible when the grease filters  
are removed.  
Please note that unless expressly  
approved in writing by Miele’s Service  
department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of packing material  
Disposal of an old appliance  
The cardboard box and packing  
materials protect the appliance during  
shipping. They have been designed to  
be biodegradable and recyclable.  
Please recycle.  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling center about the  
possibility of recycling these materials.  
Before discarding an old hood,  
unplug it from the outlet and cut off  
its power cord to prevent hazards.  
To prevent suffocation of children,  
ensure that any plastic wrappings,  
bags, etc. are disposed of safely  
and kept out of their reach.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appliance dimensions  
Exhaust connection 2 x 6" (2 x 150 mm) diameter  
1) Opening for ductwork and power cord  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Do not install this exhaust hood over  
cooktops burning solid fuel.  
Provided a larger distance is not  
given by the manufacturer of the  
cooktop, follow the minimum safety  
distances between a cooktop and  
the bottom of the hood:  
22" (550 mm) above electric  
cooktops,  
30" (762 mm) above gas cooktops,  
26" (650 mm) above an open  
electric grill or an open electric  
boiler/fryer.  
If there is more than one appliance  
beneath the hood and they have  
different minimum safety distances  
always select the greater distance.  
Observe local building codes.  
See "Important Safety Instructions"  
for further information.  
CAUTION:  
During the installation process,  
please be careful of sharp edges  
that can cause harm.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Structural support  
The ceiling mounting plate will  
support the weight of the hood. This  
ceiling plate must be attached to  
rigid structural framing that is  
supported in its entirety by the  
ceiling joists, or to the ceiling joists  
directly. Do not attach the plate  
directly to the ceiling with anchors,  
toggle bolts, etc.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation accessories  
Installation instructions  
^ See the enclosed installation  
instruction sheet.  
^ Please read the "Important Safety  
Instructions" and Installation  
instructions before installing this  
hood.  
8 leveling plates  
for correcting an uneven ceiling.  
Installation accessories  
8 Screws 8 x 60 mm with 8 Washers  
2 exhaust connectors  
for securing the ceiling plate.  
(S8 wall anchors included in the  
packaging are not for use in USA)  
4 Screws M 4 x 8 mm  
2 hose clips for securing the ducting.  
for adjusting the chimney.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air extraction  
Exhaust ducting and connections  
,WARNING  
– The ducting should be as short and  
straight as possible, and the number  
of sharp bends should be minimized.  
Danger of toxic fumes.  
Gas cooking appliances release  
carbon monoxide that can be  
harmful or fatal if inhaled.  
– For most efficient air extraction, the  
diameter of the ductwork should not  
be less than 6" (150 mm). Use of flat  
ducts also reduces the air extraction  
efficiency.  
The exhaust gases extracted by  
the hood should be vented  
outside of the building only.  
– Noise levels of the hood will increase  
if flat ducts or round ducts of less  
than 6" (150 mm) in diameter are  
used.  
Do not vent exhaust air into  
spaces within walls or ceilings or  
in attics, crawl spaces, or garages  
– Use smooth or flexible pipes made  
from approved non-flammable  
materials for exhaust ducting.  
To reduce the risk of fire, only use  
metal ductwork.  
– Where the ductwork is horizontal, it  
must slope away from the hood at  
least 1/8" per foot (1 cm per meter) to  
prevent condensation dripping into  
the appliance.  
Please read and follow the  
"IMPORTANT SAFETY  
INSTRUCTIONS" to reduce the risk of  
personal injury. Follow all local building  
codes when installing the hood.  
– If the exhaust is ducted through an  
outside wall, a Miele Telescopic Wall  
Vent can be used.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air extraction  
Condensate trap  
optional accessory  
In some cases, a 2 condensate traps  
may be required to collect and  
evaporate any condensation which may  
develop. This optional accessory is  
available for ducts 5" (125 mm) and  
5 7/8" (150 mm) in diameter.  
– If the exhaust is ducted into an  
inactive flue, the air must be expelled  
parallel to the flow direction of the  
flue.  
Never connect an exhaust hood to  
an active chimney, dryer vent, flue,  
or room venting ductwork. Seek  
professional advice before  
connecting an exhaust hood vent to  
an existing, inactive chimney or vent  
flue.  
^ When installing the condensate traps,  
ensure that they are positioned  
vertically and if possible directly  
above the exhaust outlet.  
Important  
If the ductwork runs through rooms,  
ceilings, garages, etc. where  
temperature variations exist, it may  
need to be insulated to reduce  
condensation.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical data  
All electrical work should be  
performed by a qualified electrician  
in strict accordance with national  
and local safety regulations.  
Installation, repairs and other work  
by unqualified persons could be  
dangerous. The manufacturer can  
not be held responsible for  
Important  
To increase security before the  
machine is installed, it is  
recommended to install a protective  
switch (30 mA).  
Important  
The hood must be hard wired  
accordingly:  
unauthorized work.  
Ensure that power to the appliance  
is OFF while installation or repair  
work is performed.  
Black/Red wire:. . . . connect to L1 (live)  
White wire: . . . . . connect to N (neutral)  
Green wire: . . connect to GND (ground)  
^ Verify that the voltage, load and  
circuit rating information found on the  
data plate (located behind the  
grease filter), match the household  
electrical supply before installing the  
hood.  
Maximum load. . . . . . . . . . . . . . . 820 W  
Fan. . . . . . . . . . . . . . . . . . . . 2 x 350 W  
Lighting . . . . . . . . . . . . . . . . . 6 x 20 W  
^ This appliance requires two electrical  
mains cables. Each one must be  
connected via a suitable isolator  
which complies with local and  
national safety regulations. Their  
on/off switches must be easily  
accessible after the appliance has  
been built in.  
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V  
Frequency . . . . . . . . . . . . . . . . . . 60 Hz  
Circuit rating. . . . . . . . . . . . . . . . . . 15 A  
If there is any question concerning the  
electrical connection of this appliance  
to your power supply, please consult a  
licensed electrician or call Miele’s  
Technical Service Department. See  
back cover for contact information.  
WARNING:  
THIS APPLIANCE MUST BE  
GROUNDED  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 0908  
M.-Nr. 07 262 380 / 00  
For the most updated manual see the Miele web site.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Ventilation Hood DA 398 5 User Manual
Miele Washer W2859iWPM SUPERTRONIC User Manual
Miller Electric Welding System Shopmate Series User Manual
Musical Fidelity Stereo Amplifier KW 500 User Manual
Niles Audio Car Speaker OS53 User Manual
One for All Universal Remote Univeral Remote User Manual
Panasonic All in One Printer DP C354 DP C264 DP C323 DP C263 DP C213 User Manual
Panasonic Personal Computer CF 19 User Manual
Panasonic Washer CF Y2 User Manual
Parkside Paint Sprayer PFS 100 B2 User Manual