Operating instructions
Touchtronic
G 832 SC
To prevent accidents
and machine damage,
read these instructions
before
UV
installation or use.
M.-Nr. 05 620 641
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Operation
Running the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Additional features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
"Top Solo" (18). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cleaning the door and door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 47
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
WARNING –
When using your dishwasher, follow
basic precautions, including the
following:
Do not use an extension cord to
connect this appliance to electric-
ity. Extension cords do not guarantee
the required safety of the appliance
(e.g. danger of overheating).
Be certain your appliance is prop-
erly installed and grounded by a
Read all instructions before installa-
tion or use of the dishwasher to pre-
vent injury and machine damage.
qualified technician. To guarantee the
electrical safety of this appliance, conti-
nuity must exist between the appliance
and an effective grounding system. It is
imperative that this basic safety require-
ment be met. If there is any doubt, have
the electrical system of the house
checked by a qualified electrician. The
manufacturer cannot be held responsi-
ble for damages caused by the lack, or
inadequacy of, an effective grounding
system.
The manufacturer cannot be held re-
sponsible for damage or injury
caused by improper use of this ap-
pliance.
Use the dishwasher only for its in-
tended purpose. This appliance is
intended for residential use only.
Installation
Keep these operating instructions in
a safe place and pass them on to
any future user.
Installation and repair work should
be by a Miele authorized service
technician. Work by unqualified per-
sons could be dangerous and could
void the warranty.
Electrical safety
, WARNING - Fire hazard
Do not cover or crush the plug of
an electric appliance. Ensure that the
cabinet opening for the dishwasher
provides ample space for the plug.
Installing the dishwasher in a tight
space may crimp the power cord or put
pressure on the plug which may cause
overheating.
Before installation make sure that
the voltage and frequency listed on
the data plate correspond with the
household electrical supply. This data
must correspond to prevent injury and
machine damage. Consult a qualified
electrician if in doubt.
Before installation or service, dis-
connect the power supply to the
work area by unplugging the unit, “trip-
ping” the circuit breaker or removing
the fuse.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
This equipment is not designed for Use
maritime use or for use in mobile
Only use the dishwasher if all pan-
installations such as caravans or air-
els are properly in place.
craft. However, under certain conditions
it may be possible for an installation in
these applications. Please contact the
nearest Miele dealer or the Miele Tech-
nical Service Department with specific
requirements.
Do not tamper with the controls.
To reduce the risk of injury, do not
allow children to play in, on, or
near the dishwasher.
Inspect the dishwasher for ship-
ping damage. Do not install or op-
erate a damaged unit. Contact the
place of purchase.
Do not abuse, sit, or stand on the
door or baskets of the dishwasher.
Under certain conditions, hydrogen
gas may be produced in a hot
Ensure that any plastic wrappings,
bags etc. are disposed of safely
and kept out of the reach of babies and
young children. Danger of suffocation!
water system that has not been used
for two weeks or more. HYDROGEN
GAS IS EXPLOSIVE. If the hot water
system has not been used for such a
period, turn on all hot water faucets and
let water flow from each for several min-
utes before using the dishwasher. This
will release any accumulated hydrogen
gas. Do not smoke or use an open
flame during this time.
This dishwasher should only be in-
stalled under a continuous
countertop secured to adjacent
cabinetry.
Do not install this dishwasher be-
neath a cooking surface, oven or
any appliance that radiates heat.
High temperatures from these units may
damage the dishwasher.
Do not wash plastic items unless
they are labeled "dishwasher safe"
or the equivalent. For items not labeled,
check the manufacturer’s recommenda-
tions.
Do not, under any circumstances
cut the intake hose or submerge in
liquid. This hose contains electrical
components that could cause injury or
property damage if cut or submerged.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When loading tableware, place
sharp items away from the door
seal to prevent damage to the seal.
Load knives pointing downwards to
prevent injuries.
Disposal of an appliance
If the appliance is removed from its
installation and will not be used,
the door to the wash cabinet should be
removed to prevent children from being
Only use detergents and rinse aids locked in the machine. When discard-
recommended for residential dish- ing an old dishwasher, unplug it from
washers. Keep all detergents and rinse the power outlet, remove the door to the
aids out of the reach of children.
wash cabinet and cut off the power
cord.
Do not drink water from the dish-
washer! Harmful residues could be
present.
SAVE THESE
For dishwashers with visible heating
element
INSTRUCTIONS
Do not touch the heating element
during or immediately after use.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ
AVERTISSEMENT –
Au moment d’utiliser votre
lave-vaisselle, prenez des
précautions essentielles, dont :
Sécurité électrique
Avant l’installation, assurez-vous
que la tension et la fréquence indi-
quées sur la plaque signalétique cor-
respondent bien à celles de l’alimenta-
tion électrique de la résidence afin de
prévenir les blessures et éviter d’en-
dommager l’appareil. Dans le doute,
consultez un électricien qualifié.
Lisez attentivement l’ensemble des
consignes avant d’installer ou
d’utiliser le lave-vaisselle afin de
prévenir les blessures et éviter
d’endommager l’appareil.
Avant l’installation ou l’utilisation,
coupez l’alimentation électrique,
soit en débranchant l’appareil, soit en
faisant basculer le disjoncteur ou en
enlevant le fusible.
Le fabricant ne peut être tenu
responsable de dommages ou
blessures causés par l’usage
inapproprié de l’appareil.
N’utilisez pas de rallonge pour
brancher l’appareil à la source
d’alimentation électrique. Les rallonges
ne garantissent pas la sécurité requise
pour l’appareil - si vous utilisez une ral-
longe, cela peut causer la surchauffe.
Tout usage inapproprié est
déconseillé. Cet appareil est
destiné à un usage domestique
uniquement.
Assurez-vous que votre appareil
est installé correctement et mis à la
terre par un technicien qualifié. Pour
garantir la sécurité électrique de l’ap-
pareil, il faut le raccorder à un dispositif
de mise à la terre approprié. Il est es-
sentiel de respecter cette exigence de
base en matière de sécurité. Dans le
doute, faites vérifier l’installation élec-
trique de la résidence par un électricien
qualifié. Le fabricant ne peut être tenu
responsable de dommages causés par
l’absence d’un dispositif de mise à la
terre ou par un dispositif inadapté.
Conservez ces consignes dans un
lieu sûr et transmettez-les à tout
utilisateur futur.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ
Installation
Vérifiez si votre lave-vaisselle n’a
pas subi de dommage lors du
transport. N’installez pas et n’utilisez
pas un appareil endommagé. Commu-
niquez avec le point de vente où vous
l’avez acheté.
L’installation et les réparations de-
vraient être effectuées uniquement
par un technicien de service autorisé
Miele. Les travaux effectués par des
personnes non qualifiées peuvent
s’avérer dangereux et rendre nulle la
garantie.
Assurez-vous que les emballages,
les sacs, matières plastiques et au-
tres sont correctement éliminés et tenus
hors la portée de bébés et d’enfants.
Risque de suffocation!
, ATTENTION - Risque d’incendie
Ne recouvrez et n’écrasez jamais
la fiche d’un appareil électrique. Assu-
rez-vous que dans l’espace occupé par
le lave-vaisselle il y a suffisamment de
volume libre pour la fiche. Si vous ins-
tallez le lave-vaisselle dans un espace
trop petit, le cordon d’alimentation
pourrrait être comprimé ou une pres-
sion pourrait être exercée sur la fiche,
ce qui risque de causer la surchauffe.
Le lave-vaisselle doit être installé
uniquement sous un comptoir
continu fixé à des armoires adjacentes.
N’installez pas ce modèle de
lave-vaisselle sous une plaque de
cuisson, un four ou tout autre appareil
qui diffuse de la chaleur.
Les hautes températures que diffusent
ces appareils pourraient endommager
le lave-vaisselle.
Cet appareil n’est pas conçu pour
usage sur un bateau ou dans des
engins mobiles, tels les avions ou les
véhicules récréatifs. Toutefois, son ins-
tallation est possible dans certaines cir-
constances. Veuillez communiquer vos
exigences particulières au détaillant
Miele le plus près de chez vous ou au
service du soutien technique.
En aucun cas, vous ne devez cou-
per le tuyau d’arrivée d’eau ou l’im-
merger, car il contient des composants
électriques qui pourraient causer des
blessures ou endommager la rési-
dence.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSIGNES DE SÉCURITÉ
Utilisation
Au moment de charger la vaisselle,
ne disposez pas les articles cou-
pants à proximité du joint d’étanchéité
de la porte afin d’éviter de l’endomma-
ger. Placez les couteaux avec la pointe
vers le bas afin d’éviter les blessures.
N’utilisez le lave-vaisselle que
lorsque tous les panneaux sont
bien en place.
Ne jouez pas avec les
commandes.
Utilisez seulement les détergents
et les produits de rinçage recom-
mandés pour les lave-vaisselle à usage
domestique. Conservez tous ces pro-
duits hors de la portée d’enfants.
Afin de diminuer le risque de bles-
sures, ne laissez pas les enfants
jouer près de l’appareil ni monter de-
dans ou dessus.
Évitez de malmener la porte ou les
paniers du lave-vaisselle ou de
vous y appuyer ou asseoir.
Ne consommez pas l’eau du
lave-vaisselle! Elle peut contenir
des résidus dangereux.
Dans certaines circonstances, tout
système d’eau chaude qui n’a pas
servi durant deux semaines ou davan-
tage peut produire de l’hydrogène.
L’HYDROGÈNE EST UN GAZ
INFLAMMABLE. Si le système d’eau
chaude n’a pas servi durant une telle
période, ouvrez tous les robinets d’eau
chaude et laissez l’eau couler plusieurs
minutes avant d’utiliser le lave-vaisselle.
Cette action libérera l’hydrogène qui
aura pu s’y accumuler. Entre-temps,
abstenez-vous de fumer et n’utilisez
pas de flamme nue.
Lave-vaisselle munis d’un élément
chauffant visible
Ne touchez pas l’élément chauffant
pendant ou immédiatement après
l’utilisation.
Mise au rebut de l’appareil
Si vous désinstallez l’appareil et
comptez ne plus vous en servir,
détachez-en la porte pour éviter que
des enfants se retrouvent enfermés
dans le tambour. Lorsque vous mettez
un lave-vaisselle au rebut, débran-
chez-le de la source d’alimentation
électrique, détachez-en la porte et cou-
pez le cordon d’alimentation.
Ne lavez pas des articles en plas-
tique non étiquetés "résiste au
lave-vaisselle" ou une formulation équi-
valente. Consultez les recommanda-
tions du fabricant pour les articles non
étiquetés.
CONSERVEZ
CES CONSIGNES
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the environment
Energy saving washing
This dishwasher is exceptionally eco-
nomical in the use of water and electric-
ity. For best results follow these tips:
^ For lowest energy consumption and
the gentlest washin of china and
crystal, connect the dishwasher to a
cold water source.
^ For fastest possible wash times, yet
higher energy consumption, connect
the dishwasher to a hot water source.
^ Make full use of the baskets without
overloading for the most economical
washing.
^ Choose a program that best suits the
degree of soiling and the type of
dishes being washed.
^ For small loads:
Select the "Top Solo" feature (see
"Additional features").
^ Use the correct amounts of detergent
and rinse aid.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Wash cabinet
1
2
3
4
5
6
Upper spray arm (not visible)
7
8
9
Four height adjustable feet
Triple Filter System
Salt reservoir
Cutlery tray
Upper basket
Water feed for middle spray arm
Middle spray arm
Lower spray arm
10 Detergent dispenser
11 Rinse aid reservoir
12 Data plate
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the dishwasher
Control panel
13 "On/Off" button
18 "Top solo" button
19 Program selection buttons
20 Child Safety Lock
21 Door release
14 Program list / indicators
15 Check/Refill indicators
16 Program sequence display
17 "Start/Stop" button
22 Drying vent
Every dishwasher is tested before leaving the factory. Any water remaining in
the machine is from these tests and does not indicate that the machine has
been used.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
To open the door
Child Safety Lock
The yellow key for the Child Safety
Lock is shipped on one of the spikes
at the front of the upper basket. Re-
move the key before using the dish-
washer.
The Child Safety Lock is designed to
prevent children from opening the dish-
washer.
^ Press the release catch inside the
door grip.
If the door is opened during operation,
the dishwasher will stop running. Once
the door is closed the program will re-
start.
To close the door
^ Push the baskets in.
^ Use the provided key to lock or un-
lock the dishwasher.
^ Lift the door and push until it clicks
into position.
Horizontal:
the door is locked
Vertical:
the door can be opened
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Water softener
If your water hardness is consistently
lower than 8 gr/gal (140 ppm), you do
not need to add dishwasher salt. How-
ever, the dishwasher must still be pro-
grammed to correspond to the local
water hardness.
To achieve good cleaning results, the
dishwasher needs soft water. Hard
water results in calcium deposits on
dishware and in the dishwasher.
If your tap water hardness is above
8 gr/gal (values are in US gallons)
(140 ppm), the water should be soft-
ened. This takes place automatically in
the unit’s integrated water softener.
Where the water hardness fluctuates
e.g. between 9 - 17 gr/gal (160 - 310
ppm), always program the machine to
the higher value, 17 gr/gal (310 ppm) in
this example.
– Your local water authority will be able
to advise you of the water hardness
level in your area.
If there is a fault, it will help the service
technician to know the hardness of your
local water supply.
– The dishwasher must be pro-
grammed to correspond to the water ^ Please note the water hardness:
hardness in your area.
gr/gal
– The water softener must be filled with
dishwasher salt for reactivation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Programming the water softener
1 - 24 gr/gal:
Your water hardness level must be pro-
grammed into the dishwasher using the
buttons on the control panel.
^ Use the program selection buttons
(19) to select the program which cor-
responds to the local water hardness.
^ Make sure the dishwasher is turned
off.
Table 1:
gr/gal*
1 - 4**
ppm
Program indicator
Pots & Pans
Sani Wash
^ Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.
20 - 70
90 - 130
140 - 200
220 - 280
300 - 370
390 - 430
5 -
7
8 - 11
12 - 16
17 - 21
22 - 24
Normal Plus
Normal
The "Rinse" (16) indicator and the Pots
& Pans indicator (14) will light and the
"Salt" (15) indicator will flash.
China & Crystal
Rinse and Hold
* US gallons
If this is not the case, the above steps
must be repeated.
** factory preset
The selected program indicator (14) will
flash and the "Rinse" (16) indicator will
light.
^ To store this setting press the
"Start/Stop" (17) button twice.
^ Turn off the dishwasher with the
"On/Off" button (13).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
25 - 70 gr/gal:
Checking the programmed water
hardness
^ Press the program selection button
% (19) until the "Rinse" (16) indicator ^ Make sure the dishwasher is turned
begins to flash.
off.
This is the second program level.
^ Press and hold the "Start/Stop" button
(17) and at the same time turn on the
dishwasher with the "On/Off" button
(13). Release the "Start/Stop" button
within two seconds.
^ Use the program selection buttons
(19) to select the program which cor-
responds to the local water hardness
in your area.
The programmed water hardness is in-
dicated by:
Table 2:
gr/gal
25 - 31
32 - 70
ppm
Program indicator
Pots & Pans
1 - 24 gr/gal
Lit program indicator (see table1).
Lit "Rinse" (16) indicator.
450 - 560
570 - 1260
Sani Wash
25 - 70 gr/gal
Lit program indicator (see table 2).
Flashing "Rinse" (16) indicator.
The selected program indicator (14)
and the "Rinse" (16) indicator will flash.
^ To store this setting press the
"Start/Stop" button (17) twice.
^ Turn the dishwasher off with the
"On/Off" button (13).
^ Turn the dishwasher off with the
"On/Off" button (13).
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Filling the salt reservoir
To fill the salt reservoir:
If your water hardness level is greater
than 8 gr/gal, the salt reservoir should
be filled before the first use and when
the "Salt" indicator lights.
^ Remove the lower basket.
^ Unscrew and remove the salt reser-
voir cap located on the floor of the
wash cabinet.
Only use water softener salt specially
formulated for dishwashers. Other salts
may contain insoluble additives which
can impair the water softener.
^ Place the provided funnel over the
salt reservoir.
The salt reservoir must be filled with
2 quarts (2 l) of water before adding
salt for the first time. Water does not
have to be added with subsequent
refills.
The proper salt can be purchased from
your Miele dealer or Miele’s Technical
Service Department.
,Inadvertently filling the salt
reservoir with dishwashing deter-
gent will damage the water soft-
ener.
^ Carefully fill with salt. The salt reser-
voir holds approximately 4.5 lbs
(2 kg) of salt. As it is filled, water will
run out.
^ Clean any excess salt from the
threads of the reservoir opening.
^ Screw the cap on firmly.
^ If the dishwasher will not be used im-
mediately, run the "Rinse & Hold" pro-
gram. This will remove any traces of
salt from inside the wash cabinet.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Salt indicator
Bypassing the salt indicator
When the salt reservoir is empty, the
"Salt-PC" indicator will light, indicating
that it should be refilled with reactiva-
tion salt.
If your water is soft (below 8 gr/gal) the
salt reservoir should not be filled with
salt. The indicator will remain lit and
should be disregarded or bypassed.
^ Remove the salt reservoir cap.
Looking into the salt reservoir, you will
see the top of the float chamber on the
right hand side, a.
After the reservoir has been filled, the
water softener is automatically reacti-
vated the next time the dishwasher is
started. The "Salt" indicator will be lit
during this process.
^ Using a screwdriver, carefully pivot
the float chamber towards the center
of the reservoir.
^ Using needle nose pliers, pull the
cap, b, off of the float chamber, and
remove the float, c.
Replace the float chamber cap, push
the chamber back into its upright posi-
tion, and replace the salt reservoir cap.
The "Salt" indicator should no longer be
lit.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Rinse aid
Rinse aid is recommended to prevent
spotting on dishes and glassware.
,Filling the rinse aid reservoir with
detergent will damage the reservoir.
Only pour rinse aid formulated for
residential dishwashers into the
reservoir.
Adding rinse aid
^ Pour liquid rinse aid into the reservoir
until it is visible on the surface of the
screen.
^ Press on the flap until you hear it
click shut. Failure to close it all the
way will allow water to enter the res-
ervoir during the wash program.
^ Wipe up any spilled rinse aid. The
flap will remain closed during normal
operation.
^ Add rinse aid before the first use and
whenever the "Rise aid" indicator
lights.
^ Press the button in the direction of
the arrow until the flap springs open.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
Adjusting the dosage
Rinse aid indicator
The rinse aid indicator on the control
panel will light when the rinse aid reser-
voir needs refilling.
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 1 to 6.
When the indicator first comes on, there
will be enough rinse aid left for 2 - 3
washes.
^ Use a higher setting if spots appear
on dry glassware.
^ Use a lower setting if streaking ap-
pears on dishes or glasses.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
^ The spray arms must not be blocked
by items that are too tall or hang
through the baskets. Check clear-
ance by manually rotating the spray
arms.
,Do not wash items soiled with
ash, sand, wax, grease or paint in
the dishwasher.
Ash and sand do not dissolve and
will be distributed through out the in-
side of the dishwasher.
Wax, grease and paint will cause
permanent discoloration or damage
to the dishwasher.
^ Food residue and spilt liquids should
be cleaned from the sides of the
dishwasher door. These are outside
of the wash cabinet and are not
cleaned by water from the spray
arms.
^ Scrape food from dishes before plac-
ing in the dishwasher.
Do not rinse dishes.
^ Load dishes so that water can reach
all surfaces. Do not place dishes and
cutlery inside other pieces.
^ Hollow items such as cups and
glasses should be placed upside
down in the upper basket.
^ Concave based items, such as mugs
or bowls, should be placed at an an-
gle so that water does not pool.
^ To ensure good water coverage tall,
narrow, hollow pieces, such as a
vase, should be placed in the center
of the basket, rather than in the cor-
ners.
^ Small cups and glasses should be
placed on the cup racks. Taller mugs
and glasses can be placed beneath
the rack.
^ Place very small items in the cutlery
tray or basket so they do not fall to
the bottom of the wash cabinet.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Items not recommended for
dishwashing
Glassware:
– There are no standard guidelines for
washing glassware but, when in
doubt wash by hand.
– Cutlery with wooden handles.
– Wooden cutting boards.
– Wash delicate glassware with a low
temperature program and without the
extended drying feature to reduce
the risk of clouding. See the "Pro-
gram guide".
– Glued items such as old knives with
handles glued together around the
shank of the blade.
– Hand made craft items, antique,
metal trimmed or decorative glass-
ware.
– If crystal or delicate glasses will be
washed frequently, connect the dish-
washer to cold, rather than hot water.
– Lead crystal.
– Clouding or etching may occur on
glasses after frequent washing.
– Copper, brass, tin or pewter.
– Plastic items that are not heat resis-
tant.
– When purchasing new dishes,
glasses and cutlery, make sure they
are dishwasher safe.
– Dishes with color painted over the
glaze. These dishes may fade over
time.
Silver and aluminum:
– Cast iron pots and pans.
– Silver or aluminum items may tarnish.
– Silverware previously cleaned with a
silver polish may be damp or spotted
at the end of a program where water
has adhered to the polish. This can
be rubbed off with a soft, dry cloth.
Silver that has been cleaned in an
immersion dip is usually dry at the
end of a program, but may tarnish.
– If left to dry, foods containing sulfur
can discolor silver. These include
egg yolk, onions, mayonnaise, mus-
tard, legumes, fish, fish brine and
marinades.
– Silverware may tarnish or pit if
washed next to stainless steel.
Leave space between these metals.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Cutlery tray (SC units)
Spoon heads should be placed in con-
tact with at least one of the serrated re-
tainers of the cutlery tray to ensure that
water runs off freely.
The removable cutlery tray makes un-
loading flatware easy. Simply carry the
cutlery tray to where the flatware is
stored and put the entire basket away
in one trip.
For easier unloading cutlery should be
grouped in zones, one for knives, one
for forks, one for spoons, etc.
Place knives with the cutting edge and
forks with the prongs between the hold-
ers. Spoons should be placed in the
opposite direction with the handles be-
tween the holders.
Longer items such as soup ladles, cake
slices, mixing spoons and long knives
should be placed lengthwise in the in-
dentation of the cutlery tray.
Spoons with thick handles may have to
be placed as knives and forks with their
heads in the holders.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Upper basket
Adjusting the upper basket
On select models, the upper basket
can be raised or lowered to accommo-
date tall items.
^ Slide out the upper basket.
Load the upper basket with small, light-
weight, or delicate items such as cups,
saucers, glasses, dessert bowls and
flat pans.
^ Pull up the levers at the sides of the
upper basket and adjust the basket
height.
^ Release the levers and the basket will
lock in place.
The basket can also be angled to fit tall
items in both, the lower and upper bas-
kets. The angles should not be set to
opposite extremes. This will block the
middle spray arm. Take care when slid-
ing the basket in and out in this posi-
tion.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Adjustable cup racks
Coffee bar
To allow water to run off the bottom of
coffee mugs, place slanted on top of
the coffee bar. The bar can also be
used to separate two rows of glasses.
To stack wide items, flip the bar to the
right.
Raise the rack to make room for tall
glasses. Lower it to double stack
smaller pieces.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading the dishwasher
Lower basket
Foldable spikes
For larger and heavier items such as
plates, serving platters, sauce pans,
bowls.
Two rows of spikes can be folded down
to create more room for larger dishware
e.g. pots, pans and bowls.
^ Press on the yellow levers, a, to fold
down the spikes, b.
Height limit
Vase / Bottle holder (select models)
The bottle holder is designed for washing
slim items e.g. milk or baby bottles. For
best results place the bottle holder into
the lower basket as shown. The spray jets
can reach the inside of the bottle in this
position.
The guide at the front of the upper bas-
ket determines the maximum height for
items placed in the lower basket so that
the middle spray arm is not blocked.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Basket accessories
Additional inserts for the upper and lower baskets may be purchased from your
Miele dealer or the Miele Technical Service Department.
Vase / Bottle holder
to wash milk or baby bottles
attaches to the lower basket
Upper Basket Glassware Insert
to wash long stemmed glassware
attaches to the upper basket
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Adding detergent
,Dishwasher detergents contain
irritant and corrosive ingredients.
Keep children away from detergent.
Do not fill the detergent dispenser
until you are ready to start the dish-
washer.
Only use powder detergents or tab-
lets formulated for residential dish-
washers. The use of gel or liquid de-
tergent is not recommended.
Never fill the detergent dispenser to
capacity.
Do not use more than the recom-
mended amount of detergent.
Continued use of too much deter-
gent may cause machine damage.
The horizontal marks in Compartment II
indicate levels of approximately 1 1/4,
1 3/4 and 2 tablespoons (20, 25 and
30 ml) respectively.
^ With the dishwasher door fully open
fill compartment II with 2 tablespoon
(30 ml) of powder detergent, or one
detergent tablet.
^ Close the cover. The cover will al-
ways open at the end of a wash pro-
gram except in "Rinse & Hold".
2 tablespoon (30 ml) of detergent is
enough for most normally soiled loads.
For heavily soiled loads, or if food has
dried on the dishes, a program contain-
ing a prewash cycle should be se-
lected. Add an extra tablespoon (15 ml)
of detergent to compartment I.
Less detergent is needed in homes with
very soft water and when washing
lightly soiled dishes.
^ To open, press the latch on the deter-
gent dispenser.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Running the dishwasher
Waterproof System
^ Make sure the spray arms are not
blocked.
All Miele dishwashers are specially de-
signed to shut off the water intake and
drain the wash cabinet in the rare event
of an internal water valve failure.
^ Close the door.
^ Turn on the dishwasher.
For this feature to be active, the ma-
chine must be "On" (not necessarily
running) and the door must be closed.
The "Start/Stop" indicator (17) will flash
and a program indicator (14) will light.
^ Select a wash program using the pro-
gram selection buttons (19). The se-
lected program indicator will light.
Program sequence indicator
(16)
The current step of a wash program is
indicated by the program sequence in-
dicator (16).
^ Refer to the "Program guide" for de-
tails on wash programs.
^ Select "Top Solo" if desired. See "Ad-
ditional features".
^ Press the "Start/Stop" button (17).
The wash program will begin.
Do not end a program prematurely!
Important program steps could be
omitted (e. g. reactivating the water
softener).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
At the end of a program
Interrupting a program
The "End" indicator will light when the
program has finished.
A program is interrupted as soon as the
door is opened.
If the door is closed, the program will
continue from where it was interrupted.
^ Turn off the dishwasher.
^ Open the dishwasher door slightly to
allow the dishes to cool before un-
loading.
,Water in the dishwasher may be
hot. There is a danger of being
burned! Only open the door if abso-
lutely necessary.
It is advisable to turn off the water
supply if the dishwasher will not be
used for a period of time (e.g. while
vacationing).
Changing a program
If a program is running:
^ Press the "Start/Stop" button (17) for
at least one second.
^ Select the new program using the
program selection buttons (19).
^ Select "Top Solo" if needed (see "Ad-
ditional features").
^ Press the "Start/Stop" (17) button.
The new program will begin.
If a program has not started:
^ Use the program selection buttons
(19) to choose a new wash program.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Program guide
Program
When to use
Program cycle
Pre- Main Interim Final Dry-
wash wash rinse rinse ing
1 2
1 2
Pots & Pans for heavily soiled pots and pans with dried on food X X
Main wash temperature 170 °F (75 °C)
X
X
X
-
X
X
X
X
Run-time 129 min
Sani Wash
extended wash time
-
X
X X
for sanitizing normally soiled dishware with dried
on food
Main wash temperature 150 °F (65 °C)
Run-time 135 min
Normal Plus higher wash temperature helps to clean
normally soiled dishware with stubborn dried on
food or greasy residues
X X
X X
X
X
X
-
-
X
X
Main wash temperature 150 °F (65 °C)
Run-time 127 min
1)
Normal
for normal soiled dishware
Main wash temperature 130 °F (55 °C)
Run-time 122 min
X
X
X
X
X
X
China &
"Gentle program"
-
X
X
X -
Crystal o
for lightly soiled and heat sensitive tableware
Main wash temperature 115 °F (45 °C)
Run-time 69 min
Rinse & Hold for rinsing dishes when a complete cycle is not needed -
-
-
-
-
-
Run-time 11 min
1) Standard for Energy Label
When washing a full load in Pots & Pans, Sani Wash and the Normal programs use at least 2 table-
spoons (30 ml) of detergent.
For the Pots & Pans program add an additional teaspoon (5 ml) to compartment I.
1
If "Top Solo" is selected, reduce the amount of detergent to 1 / tablespoons (20 ml).
4
Program times are based on a hot water connection. If the unit is connected to cold water, program
times will increase by approximately 25 minutes.
Usage:
Electric 0.06 - 2.3 (kWh)
Water
1.3 - 5.5 US gallons (5 - 21 L)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Additional features
"Top Solo" (18)
^ Turn the dishwasher on using the
"On/Off" button (13).
Using "Top Solo" will save water and
energy.
The "Start/Stop" (17) indicator will flash.
This program is recommended when
there is only a small load to clean. "Top
Solo" can be selected with all pro-
grams.
^ Select a program using the program
selection buttons (19).
^ Press the "Top Solo" button (18).
The "Top Solo" indicator and the se-
lected program indicator will light.
With this feature, water is directed only
to the top and middle spray arms in the
dishwasher. This means that the water
jets are only aimed at items in the up-
per basket and the cutlery tray.
^ Press the "Start/Stop" button (17).
The program will begin.
The middle spray arm also directs
water downwards, so lightly soiled
plates or platters can be placed in the
lower basket.
When using this program, do not place
pots, bowls or other hollow containers
in the lower basket.
Because a smaller load is being
washed the amount of detergent rec-
ommended can be reduced to 1 1/4
tablespoons.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
Extended drying
The extended drying time is off if the
top program indicator flashes.
If desired drying results are not consis-
tently achieved, the turbothermic cool-
ing fan can be programmed to run an
extra 14 minutes at the end of each
program.
The extended drying time is on if the
top program indicator lights.
If the the correct drying time is set:
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
^ Turn off the dishwasher.
If the drying time is incorrect:
Turning extended drying on/off
^ Press the "Top Solo" button (18).
^ Make sure the dishwasher is turned
off.
^ Press the "Start/Stop" (17) button
twice.
^ Press and hold the "Start/Stop" (17)
button and at the same time turn the
dishwasher on using the "On/Off" but-
ton.
Release the "Start/Stop" button within
two seconds.
The "Start/Stop" (17) indicator will flash.
The changed extended drying option
will be stored.
^ Turn off the dishwasher.
^ Press the "Top Solo" (18) button.
The "Salt" (15) indicator will flash and
the "End" (16) indicator will light.
If this is not the case, the above steps
must be repeated.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
With the aid of the following guide, minor problems can be fixed without a service
call.
,Repairs should only be carried out by a qualified and trained person in ac-
cordance with local and national safety regulations. Unauthorized repairs could
cause personal injury or machine damage.
What if …
Possible fault
Fix
the dishwasher does not The door is not properly
Close the door firmly.
start?
closed.
The machine is not
plugged in.
Insert the plug.
The fuse is defective or
the breaker has tripped.
Reset the circuit breaker
Make sure it is a 15 A
breaker.
the dishwasher stops
during a program?
The fuse or breaker has
tripped.
Reset the circuit breaker
Make sure it is a 15 A
breaker.
the "Intake" indicator is The water valve is closed. Open the water valve.
lit / flashing?
The filter in the water inlet See maintenance instruc-
is blocked.
tions.
The waterproof system
has activated.
Call the Miele Technical
Service Department.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
the "Drain" indicator
The triple filter in the wash Clean the filter, see main-
flashes and the program cabinet is clogged.
tenance instructions.
stops?
The drain pump or the
Clean the drain pump and
non-return valve may be the non-return valve, see
blocked. maintenance instructions.
The drain hose is kinked. Remove the kink.
the "End", "Start/Stop" There may be a technical – Press the "Start/Stop"
and "Top Solo" indica-
tors flash at the same
time at the end of a pro-
gram?
fault.
button.
– Turn off the dishwasher.
A few seconds later:
– Turn the dishwasher on.
– Select the desired pro-
gram.
– Press the "Start/Stop"
button.
If the indicators flash
again, there is a technical
problem.
– Call the Miele Technical
Service Department.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
there is a knocking
noise in the wash cabi- an item in the basket.
net?
The spray arm is hitting
Interrupt the program, re-
arrange items blocking
the spray arms.
there is a rattling noise? Items are not secure in
Interrupt the program and
rearrange loose pieces.
the wash cabinet.
there is a knocking
noise in the water
pipes?
This may be caused by
the installation or the di-
ameter of pipe.
This has no effect on the
dishwasher. If in doubt
contact a plumber.
the dishes are not dry,
The rinse aid setting may Increase the dosage or
glasses and cutlery are be too low, or the rinse aid refill the reservoir, see
spotted?
reservoir is empty.
"Before using for the first
time".
Extended drying is not ac- Activate the Extended
tivated. drying feature.
Dishes were taken out too Leave dishes in longer.
soon.
dishes are not clean?
The dishes were not
loaded correctly.
See "Loading the dish-
washer".
The program was not
powerful enough.
Select a more intensive
program, see "Program
guide".
Not enough detergent
was dispensed.
Use more detergent, see
"Adding detergent".
The spray arm jets are
clogged.
Clean the spray arm jets,
see maintenance instruc-
tions.
The triple filter is clogged Clean and reseat the filter,
or not correctly seated.
see maintenance instruc-
tions.
The non-return valve is
blocked while open.
Clean the drain pump and
the non-return valve, see
Water runs back into the maintenance instructions.
wash cabinet.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
tea or lipstick stains
have not been com-
pletely removed?
The wash temperature of Select a program with a
the selected program was higher temperature.
too low.
Not enough detergent
was used.
Use more detergent.
white residue is visible Not enough rinse aid was Increase the dosage,
on cutlery and dishes,
clouding occurs on
glassware and film can
be wiped off?
used.
see "Before using for the
first time".
The salt reservoir is
empty.
Add reactivation salt,
see "Before using for the
first time".
The salt reservoir cap was Reseat it making sure it
not correctly screwed on. screws back on correctly.
The programmed setting Raise setting of the water
of the water softener is too softener , see "Before
low.
using for the first time".
there is a bluish sheen
on the surface of
glasses and film can be
wiped off?
The rinse aid dosage is
set too high.
Reduce the dosage, see
"Before using for the first
time".
glasses are dull and dis- Glasses are not dish-
colored and film cannot washer safe.
be wiped off?
There is no remedy.
Only wash dishwasher
safe glasses.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently asked questions
What if …
Possible fault
Fix
plastic items are discol- Natural dyes e. g. from
ored? vegetables may be the
Use more detergent, see
"Adding detergent".
cause. Not enough deter- Discoloration is perma-
gent was used to break
down natural dyes.
nent.
there are rust stains on The salt reservoir cap was Reseat and screw the cap
cutlery?
not screwed on properly. on firmly.
The affected items are not There is no remedy.
corrosion resistant.
Only wash dishwasher
safe cutlery.
detergent is left in the
The dispenser was damp Dry the dispenser before
dispenser at the end of a when detergent was
program? added.
the detergent dispenser Detergent residue is
adding detergent.
Remove the residue.
lid can not be closed
properly?
blocking the catch.
water remains in the
The triple filter in the wash Clean the filter,
wash cabinet at the end cabinet is clogged.
of a program?
see maintenance
instructions.
The drain pump or the
Clean the drain pump and
non-return valve may be the non-return valve,
blocked.
see maintenance
instructions.
The drain hose is kinked. Remove the kink.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
After sales service
In the event of a fault which you cannot
correct yourself please contact:
Program update function - PC
The Program Correction (PC) allows a
technician to update the dishwasher to
make use of new technology.
– Your Miele Dealer
or
– The Miele Technical Service Depart-
ment.
USA 1-800-999-1360
CDN1-800-565-6435
When contacting the Miele Technical
Service Department, please quote the
model and serial number of your appli-
ance.
These can be found on the data plate
on the upper inside edge of the dish-
washer door.
For example, if a detergent with good
wash results using only cold water be-
comes available, the wash programs
can be modified to take advantage of
this.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Transport
To transport the dishwasher, e. g. when
moving to a new home, note the follow-
ing:
– Empty the dishwasher.
– Secure any loose parts, e. g. hoses,
cables, cutlery baskets.
– Transport the dishwasher in the up-
right position.
If unavoidable it may be transported
on its back.
Do not transport it on its side or on
the door. Residual water in the ma-
chine could leak and cause electrical
damage.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Triple filter system
The triple filter system in the base of the
wash cabinet prevents food from being
redeposited on dishes. It also protects
the circulation pump from damage
caused by foreign objects (e.g. broken
glass, bones).
The filter system should be cleaned ev-
ery 4 - 6 months or whenever a foreign
object is trapped.
Cleaning the filter in the wash
cabinet
^ Lift the filter out of the machine. Re-
move any solid particles and rinse
under running water. Scrub with a ny-
lon brush if necessary.
^ Turn off the dishwasher before clean-
ing.
^ Turn the handle counterclockwise to
release the triple filter system.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
To clean the underside of the filter, the
flap must be opened:
^ Return the filter so it lies flat in the
base of the wash cabinet.
^ Pull back the yellow clip.
^ Lock the filter by turning the handle
clockwise.
^ Rinse all parts under running water.
Scrub with a nylon brush if neces-
sary.
,The dishwasher must not be
used without the filter locked in
place.
^ Close the flap so that the clip en-
gages.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the spray arms
^ Remove the lower basket.
Sometimes particles of food get stuck
in the spray arm jets. The spray arms
should be inspected and cleaned every
4 - 6 months.
^ Turn off the dishwasher before clean-
ing.
Remove the spray arms as follows:
^ Remove the cutlery tray (if present).
^ Press the top spray arm upwards to
engage the inner ratchet and un-
screw the spray arm.
^ Pull the lower spray arm firmly up-
wards to remove.
^ Lift up the middle spray arm, a, to
engage the ratchet and unscrew the
spray arm, b.
^ Use a pointed object such as a tooth-
pick to push food particles into the
spray arm jets.
^ Rinse thoroughly under running
water.
^ Return the spray arms and check
that they rotate freely.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the wash cabinet
Cleaning the exterior
Generally, the wash cabinet is self
cleaning if the correct amount of dish-
washer detergent is used.
,Never use abrasive cleaners,
scouring pads, steel wool or caustic
(oven) cleaners on the dishwasher.
They will damage the surface.
The wash cabinet can be cleaned with
a dishwasher cleaner such as Dis
Cleaner available from your Miele
dealer or the Miele Technical Service
Department.
Plastic
All plastic surfaces and the control
panel can be cleaned with warm water
and liquid dish soap applied with a soft
sponge.
Cleaning the door and door
seal
Wipe dry using a soft cloth.
^ Wipe the door seal with a damp cloth
to remove any food particles.
,Do not use too much water when
cleaning the controls. Water could
penetrate into the electronics and
cause damage.
^ Food residue and spilt liquids should
be wiped from the sides of the dish-
washer door. These are outside of the
wash cabinet and are not cleaned by
water from the spray arms.
Stainless steel
Stainless steel surfaces can be cleaned
using a non-abrasive stainless steel
cleaner.
To help prevent resoiling, a conditioner
for stainless steel can also be used.
Apply sparingly with even pressure.
Stainless steel colored controls
These controls may become discolored
or damaged if not cleaned regularly.
Do not use a stainless steel cleaner on
the knobs or buttons.
Wood
Panels made from wood should be
cleaned using a soft damp cloth and an
appropriate wood cleaner.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the water inlet filter
,The plastic valve housing on the
intake hose contains electrical com-
ponents and should not be im-
mersed, or run through water.
A filter is incorporated in the intake
hose attached to the dishwasher’s shut
off valve. If your water is hard, or the
pipes contain sediment, this filter may
clog and prevent enough water from
entering the wash cabinet.
Cleaning the filter:
^ Disconnect the dishwasher from
electricity (unplug it or "trip" the cir-
cuit breaker).
Installing an in-line water filter
^ If your water contains a large number
of insoluble substances, a filter be-
tween the water valve and the intake
hose connection is recommended.
These filters can be purchased from
Miele’s Technical Service Depart-
ment.
^ Turn off the water valve.
^ Unscrew the intake hose.
^ Carefully remove the rubber seal.
^ Remove the filter using a needle nose
plier and rinse under running water.
^ Return the filter and seal. Make sure
they are seated correctly.
^ Screw the intake hose back on the
water valve, checking that it is not
cross-threaded.
^ Slowly turn on the valve and test for
leaks.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the drain pump and
non-return valve
If the dishwasher is not completely
drained at the end of a program, the
drain pump or non-return valve may be
blocked.
^ Turn off the dishwasher.
^ Remove the triple filter (see "Cleaning
the filter in the wash cabinet").
^ Use a jug or bowl to scoop water out
of the wash cabinet.
^ Pull out the non-return valve and
rinse well under running water.
^ Tilt the locking clamp to the side.
The drain pump is beneath the non-re-
turn valve (see arrow).
^ Before returning the non-return valve,
check that the drain pump is not
blocked. Spin the propeller several
times in both directions to check for
obstructions.
^ Carefully refit the non-return valve
and secure it with the locking clamp.
^ Refit and lock the filter in place.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Alterations rights reserved / (G 832 Plus) / 1403
M.-Nr. 05 620 641 / V00
This bio-friendly paper was bleached without the use of chlorine.
Download from Www.Somanuals.com. All Manuals Search And Download.
|