Miele Dishwasher G 4570 User Manual

Operating Instructions  
Dishwasher  
G 4570  
en - US, CA  
To prevent accidents  
and appliance damage  
read these instructions  
before  
installation or use.  
M.-Nr. 07 909 300  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Additional options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Factory default . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Technical faults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Faults in the water intake/water drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
General problems with the dishwasher . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Sounds. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Poor cleaning results . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Transport . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
User Maintenance Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Triple filter system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Help to protect the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Waterproof system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Connection to the water supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
WARNING –  
Electrical Safety  
Before installation, make sure that  
~
the voltage and frequency listed on the  
data plate correspond with the  
When using your dishwasher, follow  
basic precautions, including the  
following:  
household electrical supply. This data  
must correspond to prevent injury and  
machine damage. Consult a qualified  
electrician if in doubt.  
Read all instructions before  
installation or use of the dishwasher  
to prevent injury and machine  
damage.  
Before installation or service,  
~
disconnect the power supply to the  
work area by unplugging the unit,  
"tripping" the circuit breaker or  
removing the fuse.  
Use the dishwasher only for its  
intended purpose. This appliance is  
intended for residential use only.  
Do not use an extension cord to  
~
connect this appliance to electricity.  
Extension cords do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
Keep these operating instructions in  
a safe place and pass them on to  
any future user.  
Be certain your appliance is  
~
Correct usage  
properly installed and grounded by a  
qualified technician. To guarantee the  
electrical safety of this appliance  
continuity must exist between the  
appliance and an effective grounding  
system. It is imperative that this basic  
safety requirement be met. If there is  
any doubt, have the electrical system of  
the house checked by a qualified  
electrician.  
The dishwasher is not designed for  
~
commercial use. It is intended for use in  
domestic households and in similar  
working and residential environments  
such as, shops, offices and  
showrooms or guest houses.  
The dishwasher is not intended for  
~
outdoor use.  
It must only be used as a domestic  
~
appliance as specified in these  
If the power cord is damaged it  
~
must only be replaced by a Miele Ser-  
vice technician with a genuine Miele  
power cord.  
operating instructions, for cleaning  
domestic crockery and cutlery. Any  
other usage is not supported by the  
manufacturer and could be dangerous.  
The outlet must be accessible at all  
~
times after installation to disconnect the  
Persons who lack physical, sensory or  
mental abilities, or experience with the  
appliance should not use the  
dishwasher.  
dishwasher without supervision or  
instruction by a responsible person.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Installation  
The integrated Waterproof System  
~
offers protection from water damage,  
provided the following conditions are  
met:  
The dishwasher must be installed  
~
and connected in compliance with the  
installation instructions.  
– The dishwasher is correctly installed  
and plumbed in.  
Installation and repair work should  
~
be performed by a Miele authorized  
service technician. Work by unqualified – The dishwasher is properly  
persons could be dangerous and may  
void the warranty.  
maintained and parts are replaced  
where it can be seen that this is  
necessary.  
Do not install or use a damaged  
~
dishwasher. A damaged appliance is  
dangerous. Unplug the machine and  
call your Miele dealer or the Miele  
Technical Service Department.  
– The water supply has been turned off  
when the appliance is not used for a  
longer period of time (e.g. during  
vacations).  
Ensure that any plastic wrappings,  
The Waterproof system will work even if  
the appliance is turned off. However,  
the appliance must remain connected  
to the electrical supply.  
~
bags, etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
This appliance must not be used in  
~
a non-stationary location (e.g. on a  
This dishwasher should only be  
~
installed under a continuous counter  
boat).  
top secured to adjacent cabinetry.  
, WARNING - Fire hazard  
Do not install this dishwasher  
~
beneath a cooking surface, oven or any  
~
Do not cover or crush the plug of the  
appliance. Ensure that the cabinet  
opening for the dishwasher provides  
ample space for the plug. Installing the  
dishwasher in a tight space may crimp  
the power cord or put pressure on the  
plug which could cause overheating.  
appliance that radiates heat.  
High temperatures from these units  
may damage the dishwasher.  
When installing the dishwasher  
~
under a counter top and removing the  
toe-kick, a build-under toe-kick must be  
installed. Use the respective installation  
kit. Danger of injuries.  
The plastic housing of the water  
~
connection contains an electrical  
component. The housing must not be  
submerged in water.  
Do not install the dishwasher in an  
~
area where it will be exposed to  
temperatures below freezing.  
There are electrical wires in the  
~
water inlet hose. Never cut the water  
inlet hose, even if it is too long.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
Do not cut the intake hose or  
When loading tableware, place  
~
~
submerge it in liquid. This hose  
contains electrical components that  
could cause injury or property damage  
if cut or submerged.  
sharp items away from the door to  
prevent damage to the seal. Load  
sharp items pointing downwards to  
prevent injuries.  
Only connect the dishwasher to the  
Only use detergents and rinse aids  
~
recommended for residential  
~
mains when all installation and  
plumbing work is complete.  
dishwashers. Keep all detergents and  
rinse aids out of the reach of children.  
Use  
Do not inhale or swallow detergents.  
~
Dishwasher detergents contain irritant  
and corrosive ingredients. They can  
cause burning in the mouth and throat if  
swallowed, or inhibit breathing. Consult  
a doctor immediately if detergent has  
been swallowed or inhaled.  
To reduce the risk of injury, do not  
~
allow children to play in, on or near the  
dishwasher. It is possible for small  
fingers to be pinched in the door.  
Only use the dishwasher if all panels  
~
are properly in place.  
Do not drink water from the  
~
dishwasher! Harmful residues could be  
Do not tamper with the controls.  
~
present.  
Do not damage, sit or stand on the  
~
door or baskets of the dishwasher.  
Do not fill the rinse aid reservoir or  
~
Close the door when not in use.  
salt container with detergent. It will  
destroy the rinse aid compartment and  
water softener.  
Under certain conditions, hydrogen  
~
gas may be produced in a hot water  
system that has not been used for two  
weeks or more. HYDROGEN GAS IS  
EXPLOSIVE. If the hot water system has  
not been used for such a period, turn  
on all hot water faucets and let water  
flow from each for several minutes  
before using the dishwasher. This will  
release any accumulated hydrogen  
gas. Do not smoke or use an open  
flame during this time.  
Dishes can be very hot at the end of  
~
a program. Allow the dishes to cool  
until they are cool enough to handle  
before unloading them.  
Disposal of an appliance  
If the appliance is removed from its  
~
installation site and will not be used,  
remove the doorlock to the wash  
cabinet to prevent children from locking  
themselves in the machine.  
Be sure that all items placed in the  
~
dishwasher are "dishwasher safe". For  
items not labeled, check the  
SAVE THESE  
manufacturer’s recommendations.  
INSTRUCTIONS  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
a Upper spray arm (not visible)  
b Cutlery tray (depending on model)  
c Upper basket  
g Triple filter system  
h Data plate  
i Rinse aid reservoir  
d Middle spray arm  
j Dual compartment detergent  
dispenser  
e Air inlet for drying  
(depending on model)  
kSalt container  
f Lower spray arm  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Guide to the dishwasher  
Control panel  
a Check / Refill indicators  
b Program selection  
c Program button  
dU (On) button with indicator  
eV (Off) button  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Energy saving washing  
This dishwasher is exceptionally  
economical in the use of water and  
electricity. For best results follow these  
tips:  
^ For lowest energy consumption you  
may connect the dishwasher to a  
cold water source.  
^ For fastest possible wash times, with  
slightly higher energy consumption,  
connect the dishwasher to a hot  
water source.  
^ Make full use of the baskets without  
overloading for the most economical  
washing.  
^ Use the correct amount of detergent  
and rinse aid. Detergent dosage is  
dependent upon the amount of  
soiling and type of dishware being  
washed. See the "Program Guide" for  
more information.  
^ When using powder or gel detergent,  
reduce the amount to 2/3 of the  
normal amount when washing a small  
load.  
^ Choose a program that best suits the  
degree of soiling and the type of  
dishes being washed.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To open the door  
To close the door  
^ Push the baskets in.  
^ Lift the door and push until it clicks  
into position.  
^ Pull the handle to open the door.  
If the door is opened during operation,  
the dishwasher will stop running. Once  
the door is closed the program will  
continue.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Water softener  
In areas where the water hardness  
fluctuates (e.g. 37-50 °d [39-52 gr/gal])  
always program the machine to the  
higher value (in this example 50 °d  
[52 gr/gal]).  
To achieve good cleaning results, the  
dishwasher needs soft water (water that  
is low in minerals). Hard water results in  
calcium deposits on dishware and in  
the dishwasher.  
If there is a fault, it will help the service  
If your tap water hardness is above 4 °d technician to know the hardness of your  
(4 gr/gal) the water should be softened. local water supply.  
The built-in water softener is designed  
Please note your water hardness  
below:  
for this purpose. The water softener is  
suitable for a water hardness up to  
70 °d (73 gr/gal).  
°d (gr/gal)  
– The water softener requires  
dishwasher salt.  
The water hardness was programmed  
at 1-4 °d (1-4 gr/gal) by factory default.  
If using "Tab" products which include  
salt, you should still add salt to the  
machine to achieve optimal cleaning  
results.  
– The dishwasher must be correctly  
programmed to match the hardness  
of your water.  
– Your local water authority will be able  
to advise you of the exact water  
hardness level in your area.  
If the hardness of your local supply  
is constantly lower than 4 °d (4 gr/gal),  
you do not need to add water  
softener salt. However the water  
hardness level must still be  
programmed.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Programming the water softener  
The set value is indicated by the  
flashing rhythm of the upper right  
program indicator (see Table).  
During programming, other indicator  
lights flash and light up each time you  
press a button. Only the indicator lights  
in the following operating steps are  
important for the programming.  
°d  
gr/gal  
Flashing rhythm  
"Rinse"  
1 - 4  
1 - 4  
Once short  
2 short  
5 - 7  
5 - 7  
To exit the programming mode at any  
time and start over again, turn the  
dishwasher off with the V button.  
8 - 11  
8 - 11  
3 times short  
4 times short  
5 times short  
6 times short  
7 times short  
8 times short  
9 times short  
Once long  
12 - 15  
16 - 20  
21 - 25  
26 - 30  
31 - 36  
37 - 45  
46 - 70  
12 - 16  
17 - 21  
22 - 26  
27 - 31  
32 - 38  
39 - 47  
48 - 73  
^ Press the V button to turn the  
dishwasher off.  
^ Press and hold the "Program" button  
and turn the dishwasher on  
simultaneously using the U button.  
Keep the "Program" button pressed  
for at least four seconds until the  
lower right program indicator lights  
up.  
^ Press the "Program" button briefly to  
select the flashing rhythm  
corresponding to the water hardness  
in your area.  
If it does not come on, start over.  
With each press of the button the  
value will go up one level. Once the  
highest value is reached the setting  
will start again from the beginning.  
^ Now press the program button briefly  
twice.  
The "Intake/Drain" indicator flashes  
twice at a short interval and the upper  
right program indicator flashes once at  
a short interval (factory default).  
Example:  
The water hardness is 22 °d. The  
upper right program indicator flashes  
6 times at a short interval.  
^ Press the "Program" button (for at  
least one second) until the  
"Intake/Drain" indicator lights up.  
^ Press the V button to turn the  
dishwasher off.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Checking the programmed water  
hardness  
^ Press the V button to turn the  
dishwasher off.  
^ Press and hold the "Program" button  
and turn the dishwasher on  
simultaneously using the U button.  
Keep the "Program" button pressed  
for at least four seconds until the  
lower right program indicator lights  
up.  
^ Now press the program button briefly  
twice.  
The set water hardness value is  
indicated by the flashing rhythm of the  
upper right program indicator light (see  
Table).  
^ Press the V button to turn the  
dishwasher off.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Every dishwasher is tested before  
leaving the factory. Any water  
remaining in the machine is from the  
final factory test and does not  
indicate that the machine has been  
used.  
Important: The salt container must  
be filled with 1 quart (1 l) of water  
before adding salt for the first time  
so the salt can dissolve  
properly. Water does not have to be  
added with subsequent refills.  
Filling the salt container  
,Inadvertently filling the salt  
container with dishwashing  
detergent (including liquid  
detergent) will damage the water  
softener.  
,Only use water softener salt  
specially formulated for  
dishwashers. Other salts may  
contain insoluble additives which  
can impair the water softener.  
^ Place the provided funnel over the  
salt container and carefully fill it with  
salt. The salt container holds approx.  
2.2 lbs (1 kg) of salt, depending on  
the type of salt.  
If using "Tab" products which  
include salt, still add salt to the  
machine to achieve optimal cleaning  
results and ensure long-term  
^ Clean any excess salt from the  
threads of the container opening.  
Screw the lid on firmly.  
functioning of the water softener.  
^ Remove the lower basket from the  
wash cabinet and unscrew the salt  
container lid.  
^ Immediately after each refill, run the "  
Express" program without a load.  
This will remove any traces of salt  
from inside the wash cabinet.  
When opening the salt container,  
water will run out. Open the  
container only to refill salt.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Refill salt message  
^ When the "Salt" indicator light comes  
on, refill the salt after the program  
has finished.  
After the container has been filled, the  
"Salt" indicator light can remain on for a  
short time. It will go out once the  
reactivation process is complete.  
The "Salt" indicator light is turned off if  
you have programmed the dishwasher  
to a water hardness below 4 °d  
(4 gr/gal)).  
,Immediately after each refill, run  
the "Express" program without a  
load. This will remove any traces of  
salt from inside the wash cabinet.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Rinse aid  
Rinse aid helps to prevent spotting on  
dishes and glassware.  
The rinse aid is filled in the reservoir  
and the set amount will be  
automatically dosed.  
,Filling the rinse aid reservoir with  
detergent will damage the reservoir.  
Only pour rinse aid formulated for  
residential dishwashers into the  
reservoir.  
^ Pour liquid rinse aid into the reservoir  
until it is visible on the surface of the  
screen.  
When using "Tab" detergents rinse  
aid is not needed.  
The rinse aid reservoir holds approx.  
3.7 oz (110 ml).  
Adding rinse aid  
^ Press on the flap until you hear it  
click shut. Failure to close it all the  
way allows water to enter the  
reservoir during the wash program.  
^ Clean any spilled rinse aid. The flap  
will remain closed during normal  
operation.  
Rinse aid indicator  
When the rinse aid indicator first comes  
on, there will be enough rinse aid left  
for 2 - 3 washes.  
^ Press the button in the direction of  
^ The rinse aid indicator on the control  
panel will light when the rinse aid  
reservoir needs refilling.  
the arrow until the flap springs open.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Adjusting the dosage  
The amount set can be recognized by  
the flashing rhythm of the "SaniWash"  
indicator (see table):  
The dosage selector is preset to 3. This  
dispenses approximately 3 ml of rinse  
aid per program. It can be adjusted  
from 0 to 6.  
Dosage in ml  
Flashing rhythm  
-
0
1
2
3
4
5
6
– Use a higher setting if spots appear  
on dry glassware.  
Once  
Twice  
^ Use a lower setting if streaking  
3 times  
4 times  
5 times  
6 times  
appears on dishes or glasses.  
^ Turn the dishwasher off "V".  
^ Press and hold the "Program" button  
and at the same time turn the  
dishwasher on g.  
^ Press and hold the "Program" button  
until the "Intake / Drain" indicator  
lights up.  
Hold the "Program" button until the  
"Rinse & Hold" indicator comes on.  
If it does not come on start over.  
^ Select the desired setting with the  
"Program" button. Every touch of the  
button increases the level.  
^ Press the "Program" button three  
times.  
The "Intake / Drain" indicator flashes  
three times in intervals.  
The programmed dosage is saved.  
^ Turn the dishwasher off "V".  
The "SaniWash" indicator flashes 3  
times in intervals.  
The rinse aid dosage is adjusted to  
3 ml by default.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
^ The spray arms must not be blocked  
by items that are too tall or hang  
through the baskets. Check  
clearance by manually rotating the  
spray arms.  
,Do not wash items soiled with  
ash, sand, wax, grease or paint in  
the dishwasher.  
Ash and sand do not dissolve and  
will be distributed throughout the  
inside of the dishwasher.  
^ Place very small items in the cutlery  
tray or basket so they do not fall to  
the bottom of the wash cabinet.  
Wax, grease and paint will cause  
permanent discoloration and  
damage to the dishwasher.  
^ Food residue and spilled liquids  
should be cleaned from the sides of  
the dishwasher door. These are  
outside of the wash cabinet and are  
not cleaned by water from the spray  
arms.  
^ Scrape food from dishes before  
placing them in the dishwasher,  
rinsing is not necessary.  
^ Some foods contain natural dyes,  
e.g. carrots or tomatoes. Plastic items  
may discolor permanently if they  
come in contact with food dyes.  
^ All items can be placed anywhere in  
the baskets.  
^ Load dishes so that water can reach  
all surfaces. Do not place dishes or  
cutlery inside other pieces.  
^ Make sure that all items are securely  
positioned.  
^ Hollow items such as cups and  
glasses should be placed upside  
down in the baskets.  
^ To ensure good water coverage, tall,  
narrow and hollow items, i.e. vases  
or champagne glasses, should be  
placed in the center of the basket  
rather than in the corners.  
^ Concave based items such as mugs  
or bowls, should be placed at an  
angle so that water does not pool.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Items not recommended for  
dishwashing  
Glassware:  
– There are no standard guidelines for  
washing glassware, when in doubt  
wash by hand.  
– Cutlery with wooden handles  
– Wooden cutting boards  
– When purchasing new dishes,  
glasses and cutlery, make sure they  
are dishwasher safe. Only wash  
items marked "dishwasher safe" in  
the dishwasher.  
– Glued items such as old knives with  
handles glued together around the  
shank of the blade  
– Handmade craft items, antique,  
metal trimmed or decorative  
glassware  
– If fine glassware is washed in the  
dishwasher select the "China &  
Crystal" program*. This will reduce  
the risk of clouding.  
– Plastic items that are not heat  
resistant  
– Copper, brass, tin or aluminum  
Silver and aluminum:  
– Dishes with color painted over the  
glaze. These dishes may fade over  
time  
– Silver or aluminum items may tarnish.  
– Silverware previously cleaned with a  
silver polish may be damp or spotted  
at the end of a program where water  
has adhered to the polish. This can  
be rubbed off with a soft, dry cloth.  
Silver that has been cleaned in an  
immersion dip is usually dry at the  
end of a program, but may tarnish.  
– Fine glassware and crystal items  
should only be washed using the  
"China & Crystal" program*.  
Otherwise clouding or etching may  
occur after frequent washing.  
– Cast iron pots and pans  
– If left to dry, foods containing sulfur  
can discolor silver. These include  
egg yolk, onions, mayonnaise,  
mustard, fish and marinades.  
* depending on model  
– Silverware may tarnish or pit if  
washed next to stainless steel.  
Leave space between these metals.  
If unsure whether your china and  
crystal are dishwasher safe, please  
check with the manufacturer. The  
China & Crystal program, although  
extremely gentle and thorough can  
cause the china and crystal to "wear"  
if they are not dishwasher safe.  
– Clean aluminum items, e.g. grease  
filters, with domestic dishwasher  
detergent only.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Typical load for 10 place settings  
Upper basket  
Lower basket  
Cutlery tray  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Upper basket  
Adjustable cup rack  
,Always use the dishwasher with  
the upper and lower basket in place.  
^ Raise the rack to make room for tall  
glasses. Lower it to double stack  
smaller pieces.  
^ Load the upper basket with small,  
lightweight, or delicate items such as  
cups, saucers, glasses, dessert  
bowls and flat pans.  
^ Long items such as soup ladles,  
mixing spoons and long knives  
should be placed lying down across  
the front of the upper basket.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Adjusting the upper basket  
Depending on the setting of the upper  
basket, a variety of plate dimensions  
can be accommodated.  
The upper basket can be raised or  
lowered to accommodate tall items.  
For example: If the upper basket is in  
its highest position a plate with a  
diameter of 12 3/16" (31 cm) can be fit in  
the lower basket.  
The basket can also be angled to fit tall  
items in both, the upper and lower  
baskets. The angles should not be set  
to opposite extremes. This will block the  
middle spray arm. Take care when  
sliding the basket in and out in this  
position.  
^ Slide out the upper basket.  
^ Pull up the levers at the sides of the  
upper basket and adjust the basket  
height.  
^ Release the levers and the basket will  
lock in place.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Lower basket  
Foldable spikes  
The front two rows of spikes can be  
folded down to create more room for  
larger dishware, e. g. pots, pans and  
bowls.  
^ For larger and heavier items such as  
plates, serving platters, saucepans,  
bowls, etc.  
Small plates such as saucers can  
also be arranged in the lower basket.  
^ Press the yellow lever down a and  
fold down the spikes b.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Removable spike insert  
Bottle holder (depending on model)  
The spike insert can be removed in  
order to make room for larger  
The bottle holder can be used to wash  
narrow items, e. g. milk and baby  
bottles.  
tableware, such as shallow pans.  
^ Place the bottle holder in the lower  
basket as shown in the illustration. If  
placed anywhere else, water from the  
spray jets will not reach all surfaces.  
The bottles will not be properly  
cleaned.  
Removing the insert a  
^ To remove the insert, gently pull the  
handle upwards.  
Replacing the insert b  
^ Slide the hitches of the insert under  
the lengthwise wire of the lower  
basket.  
^ Push down on the handle to snap the  
insert into position.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery tray  
^ Arrange the cutlery as shown in the  
cutlery tray.  
Spoons with thick handles may have to  
be placed as knives and forks with their  
heads in the holders.  
For easier unloading cutlery should be  
grouped in zones, one for knives, one  
for forks, one for spoons, etc.  
Place knives with the cutting edge  
down and forks with the prongs  
between the holders. Spoons should be  
placed in the opposite direction with  
the handles between the holders so  
that water can run off more easily.  
The upper spray arm must not be  
blocked by tall cutlery items.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
Optional dishwasher accessories are available from your Miele dealer, Miele or  
Mieleusa.com (depending on your model some may already be supplied with your  
machine as standard).  
If you would like to...  
the following accessory will need  
to be ordered...  
...wash baby bottles  
... a bottle holder  
...ash additional items of cutlery  
... a small cultery basket for the lower  
basket.  
...wash additional glassware  
... a glassware insert for the lower  
basket.  
MieleCare Collection  
Miele branded cleaning and care products, including dishwasher salt, detergent  
and rinse aid, are available to order from your Miele dealer, Miele or the on-line  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Detergent  
You can use powder, gel or tab  
detergents. Follow the dosage  
information on the detergent  
packaging.  
,Dishwasher detergents contain  
irritant and corrosive ingredients.  
Avoid inhaling or swallowing  
dishwasher detergent.  
Detergent tabs are not recommended  
for use with the program "Express". The  
tabs may not dissolve completely.  
Keep children away from detergent.  
Keep detergent out of the reach of  
children. Keep children away from  
the dishwasher when the door is  
open. There could still be detergent  
residues in the dishwasher. Only  
add detergent just before starting  
the program and lock the door with  
the child safety lock (depending on  
model).  
Dishwasher cleaning products are  
available from MIele.  
,Only use detergents formulated  
for domestic dishwashers.  
Use only the recommended amount  
of detergent. Continued use of too  
much detergent may cause machine  
damage.  
When using the "China & Crystal"  
program (depending on model)  
reduce the amount of detergent  
used to at least ½ of the normal  
dosage. Also make certain your  
china and crystal are dishwasher  
safe.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Adding detergent  
^ Add detergent to the compartments  
and close the container flap.  
^ Press the latch on the detergent  
dispenser. The flap will spring open.  
^ Use one tab or add powder or gel  
detergent to compartment II and  
close the flap.  
The flap is always open at the end of a  
program.  
^ If a Pre-rinse is desired, and  
available for your chosen program,  
add 1 teaspoon (5 ml) of detergent to  
compartment I.  
Compartment I holds a maximum of  
2 teaspoons (10 ml),  
compartment II holds a maximum of  
3.5 tablespoons (50 ml) of detergent.  
The horizontal marks in compartment II  
indicate the levels of approximately 1 ¼  
and 2 tablespoons (20 and 30 ml)  
respectively. The marks indicate the  
approximate fill level in ml when the  
door is open in a horizontal position.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Turning on  
Starting a program  
^ Open the water supply, if it is closed. ^ Start the program by closing the  
door.  
^ Open the door.  
Cancel a program only in the first  
few minutes.  
^ Make sure the spray arms can rotate  
freely.  
Otherwise important program steps  
(e.g. the water softening) may be  
interrupted.  
^ Press the U button to turn the  
dishwasher on.  
The U indicator and the indicator of the  
last set program light up.  
Standby  
A few minutes after the last key is  
pressed or at the end of the program  
the dishwasher will switch into Standby  
mode to save energy. The display and  
the indicators are turned off and only  
the U indicator lights.  
Selecting a program  
Choose your program according to the  
type of load and soiling.  
See the "Program Guide" for more  
information.  
^ To turn the dishwasher back on press  
^ Select the desired program with the  
any key (except V).  
Program selection button.  
The indicator light for the selected  
program will come on.  
If refill salt and/or rinse aid or a fault  
are present in the display, the  
dishwasher will not switch to  
Standby mode.  
You can now select any additional  
options (see "Additional Options").  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Program Guide  
Progra  
When to use  
Program sequence  
m guide  
Pre-rinse  
Main  
wash  
Interim rinse Final Drying  
rinse  
1
2
1
2
Pots &  
Pans  
For normally soiled pots &  
pans with dried on food, and  
heavily soiled dishware, use  
120% detergent  
X
X
X
X
X
recommended.  
Normal  
Program for completely  
as required  
X
X
X
X
washing a full load of normally  
soiled dishware with the ability  
to adjust energy and water  
consumption based on the soil  
load of the dishware.  
China &  
Crystal  
For temperature sensitive  
glassware and lightly soiled  
dishware, use 50% detergent  
recommended.  
X
X
X
X
X
SaniWash To sanitize dishware, e.g.  
baby bottles, cutting boards  
X
X
X
X
X
X
X
and preparation dishware.  
Express  
"Quick program" for lightly  
soiled dishware, e.g. party  
dishware, not suitable for  
detergent tabs.  
X
Rinse &  
Hold  
To rinse dishes when a  
complete program is not  
needed detergent is not  
recommended.  
X
Usage:  
Electrical - 0.01 - 1.23 kwh  
Water - 1.3 - 5.3 gal (5 - 20 l)  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
At the end of a program  
Turning off  
^ Open the door slightly to check  
At the end of a program:  
^ Open the door.  
whether the program has finished.  
The indicator for the selected program  
has gone out.  
^ Press the V button to turn the  
dishwasher off.  
The program has not yet finished as  
long as the program indicator is still  
flashing. Close the door again so  
that the program runs to the end.  
The dishwasher continues to use  
electricity until turned off with the V  
button.  
To be safe, turn the water supply off if  
the dishwasher is unattended for an  
extended period of time, e.g. during  
vacation.  
In the "Express" program, the drying  
fan will run for a few minutes after  
the program is completed.  
Unloading the dishwasher  
You can now empty the dishwasher.  
Dishes tend to break and chip more  
easily when they are hot.  
,To avoid damage to counter  
tops rom steam, open the door after  
the the end of the program either  
fully (never ajar) or keep it closed  
until you are removing all the dishes.  
Allow the dishes to cool until they are  
comfortable enough to handle before  
unloading them.  
If you open the door fully after switching  
off, the dishes will cool much faster.  
Unloading the lower basket first will  
prevent water drops from the upper  
basket and cutlery tray (depending on  
model) from dropping onto dishes in  
the lower basket.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use  
Interrupting a program  
Changing a program  
A program is interrupted as soon as the  
door is opened.  
If the detergent dispenser flap is  
already open, do not change the  
program.  
If the door is closed again, the program  
will continue from where it was  
interrupted.  
If a program has already started and  
you wish to change it:  
,Water in the dishwasher is hot.  
Danger of scalding.  
^ Open the door.  
Only open the door if absolutely  
necessary and exercise extreme  
caution when doing so. Before  
closing the door again, leave it ajar  
for approx. 20 seconds. This will  
enable the temperature in the wash  
cabinet to settle. Close the door  
firmly until it clicks into place.  
^ Press the V button.  
^ Press the V button.  
^ Select the desired program with the  
Program selection button.  
^ Start the program by closing the  
door.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Buzzer  
^ Press the Program button four times  
briefly.  
A signal sounds at the end of a  
program and when a fault occurs.  
The "Intake/Drain indicator flashes 4  
times at short intervals.  
The buzzer at the end of a program  
sounds four times in intervals with a  
brief break in between.  
The sequence of flashing by the upper  
right program indicator shows whether  
the program end buzzer is turned on or  
off:  
The buzzer for a fault sounds four times  
without pausing.  
– upper right program indicator  
flashing: buzzer is turned on  
The buzzer is activated by default.  
It can be turned off, so it does not  
sound at the end of a program. The  
buzzer for a fault cannot be turned off.  
– upper right program indicator is off:  
buzzer is turned off  
^ Open the door.  
^ To change the setting press the  
"Program" button (for at least one  
second) until the "Intake/Drain"  
indicator lights up.  
^ Turn the dishwasher off with the V  
button.  
^ Press and hold the Program button  
and turn the dishwasher on  
^ Now press the Program button  
briefly.  
simultaneously using the K button.  
Keep the program button pressed for The setting is saved immediately.  
at least four seconds until the lower  
^ Turn the dishwasher off with the V  
right program indicator lights up.  
button.  
If it does not come on, start over.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional options  
Factory default  
The sequence of flashing by the upper  
right program indicator shows whether  
a setting has been set differently to the  
default setting.  
All settings can be reset to factory  
default.  
^ Open the door.  
– upper right program indicator  
flashes:  
^ Turn the dishwasher off with the V  
button.  
all values are set to the default  
settings.  
^ Press and hold the Program button  
and turn the dishwasher on  
– upper right program indicator is off:  
at least one setting has been  
changed.  
simultaneously using the K button.  
Keep the Program button pressed for  
at least four seconds until the lower  
right program indicator lights up.  
^ To reset the dishwasher to factory  
default press the "Program" button  
(for at least one second) until the  
"Intake/Drain" indicator lights up.  
If it does not come on, start over.  
^ Press the Program button briefly 12  
times.  
^ Now press the Program button  
briefly.  
The "Intake/Drain" indicator flashes  
once long and twice short.  
The setting is saved immediately.  
^ Turn the dishwasher off with the V  
button.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
,Repairs should only be carried out by a qualified and trained person in  
accordance with local and national safety regulations. Unauthorized repairs  
could cause personal injury or machine damage.  
Technical faults  
Problem  
Possible fault  
The door is not properly Push the door firmly shut.  
closed.  
The machine is not  
plugged in.  
The circuit breaker has Reset the circuit breaker  
Solution  
The dishwasher  
does not start.  
Insert the plug.  
tripped.  
(see the data plate for minimum  
amperage).  
The dishwasher is not  
turned on.  
Press the U button and select a  
program.  
The dishwasher  
stops during a  
program.  
The circuit breaker has – Reset the circuit breaker (see  
tripped.  
the data plate for minimum  
amperage).  
– If the circuit breaker trips  
again, contact Miele.  
The buzzer sounds. There may be a  
All indicator lights technical fault.  
of the program  
– Turn the dishwasher off with  
the V button.  
After a few seconds:  
selection flash  
– Turn the dishwasher on.  
when the door is  
– Select the desired program  
with the Program selection  
button.  
open.  
– Close the door.  
If the indicator lights flash again,  
a technical fault has occurred.  
– Contact Miele.  
The drain pump  
may also be  
The waterproof system  
has activated.  
– Turn off the water supply.  
– Contact Miele.  
running when the  
door is open.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Faults in the water intake/water drain  
Problem  
Possible fault  
Solution  
The dishwasher  
stops shortly after  
the program starts.  
The buzzer sounds.  
The "Intake/Drain"  
indicator flashes and  
lights up alternately  
when the door is  
open.  
The water supply valve – Open the water supply valve  
is closed.  
all the way.  
The dishwasher has  
stopped.  
Before fixing the fault:  
– Turn the dishwasher off with  
The buzzer sounds.  
The "Intake/Drain"  
indicator flashes  
when the door is  
open.  
the V button.  
Fault in the water intake. – Open the water supply valve  
all the way.  
– Clean the water intake filter  
(see "Cleaning and Care").  
– The water pressure at the  
water connection is less than  
30 kPa (0.3 bar/4.35 psi).  
Consult a plumber.  
Fault in the water drain. – Clean the triple filter (see  
There might be water in  
the wash cabinet.  
"Cleaning and care").  
– Clean the drain pump (see  
"Cleaning and Care").  
– Clean the non-return valve  
(see "Cleaning and Care").  
– Remove any kinks in the  
drain hose.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
General problems with the dishwasher  
Problem  
Possible fault  
Solution  
The display is dark  
and only the " U "  
indicator lights.  
The indicator lights go out Press any button (except  
automatically to save  
energy (Standby).  
V) to come out of Standby  
mode.  
Detergent residue is  
The dispenser was damp  
Dry the dispenser before  
left in the dispenser at when detergent was added. adding detergent.  
the end of a program.  
The detergent  
dispenser lid cannot blocking the catch.  
be closed properly.  
The door and the  
interior walls are still It is the normal operating  
Detergent residue is  
Remove the residue.  
This is not a fault!  
None!  
The moisture will  
wet after a program  
has finished.  
mode of the drying system. evaporate after a short  
time.  
Water remains in the  
wash cabinet at the  
end of a program.  
Before fixing the fault:  
– Turn the dishwasher off  
with the V button.  
The triple filter in the wash Clean the triple filter (see  
cabinet is clogged.  
"Cleaning and care").  
The drain pump or the  
non-return valve may be  
blocked.  
Clean the drain pump and  
the non-return valve (see  
"Cleaning and care").  
The drain hose is kinked.  
Remove any kinks from the  
drain hose.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Sounds  
Problem  
Possible fault  
The spray arm is hitting an Interrupt the program,  
item in the basket. rearrange items blocking  
the spray arms.  
Items are not secure in the Interrupt the program, and  
Solution  
There is a knocking  
noise in the wash  
cabinet  
There is a rattling  
noise in the wash  
cabinet  
wash cabinet.  
rearrange loose pieces.  
A foreign object (e.g. a  
Remove the foreign object  
cherry stone) has become from the drain pump (see  
lodged in the drain pump. "Cleaning the drain pump  
and non-return valve")  
There is a knocking  
This may be caused by  
This has no effect on the  
dishwasher. If in doubt,  
contact a plumber.  
noise in the water line the installation or the  
diameter of the pipe.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Poor cleaning results  
Problem  
Possible fault  
Solution  
The dishes are not The dishes were not loaded See "Loading the  
clean.  
correctly.  
dishwasher".  
The program was not  
powerful enough.  
Select a more intensive  
program (see "Program  
Guide").  
Not enough detergent was  
dispensed.  
Use more detergent, or  
change the detergent.  
The spray arms are blocked. Turn the spray arms and  
rearrange the dishes if  
necessary.  
The triple filter in the wash  
cabinet is clogged or not  
correctly inserted.  
Clean the filter and insert it  
correctly.  
Clean the spray arm jets, if  
The spray arm jets might be required (see "Cleaning and  
clogged as a result. care").  
The non-return valve is stuck Clean the drain pump and  
open and blocked. Wash  
water will run back into the  
wash cabinet.  
the non-return valve (see  
"Cleaning and care").  
Glasses and  
The rinse aid dosage is set Reduce the dosage (see  
too high. "Rinse aid").  
cutlery show  
streaks. There is a  
bluish sheen on the  
surface of glasses  
and a film which  
can be wiped off.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Problem  
Possible fault  
Solution  
Dishes are not dry, The rinse aid setting may be Increase the dosage, refill  
glasses and  
cutlery are  
spotted.  
too low, or the rinse aid  
reservoir is empty.  
the reservoir or switch the  
rinse aid product when  
refilling (see "Rinse aid").  
Dishes were taken out too  
soon.  
Leave dishes in longer (see  
"Use").  
A "Tab" product was used.  
Change the detergent, or  
These products have a low refill the rinse aid (see "Rinse  
drying effect.  
aid").  
White residue is  
Not enough rinse aid was  
Increase the dosage (see  
"Setting the rinse aid  
dosage").  
visible on cutlery used.  
and dishes.  
Clouding occurs  
The salt container is empty. Refill the salt container (see  
"Filling the salt container").  
on glassware and  
cutlery; film can be  
wiped off.  
The salt container lid was not Reseat it making sure it  
correctly screwed on.  
screws back on correctly.  
Unsuitable "Tab" products  
were used.  
Use a different detergent.  
Use normal (powder or gel)  
detergent.  
The water softener is  
programmed on too low a  
setting.  
Program a higher water  
softener setting (see "Water  
softener").  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frequently Asked Questions  
Problem  
Possible fault  
Detergent deposits.  
Solution  
Glasses have a  
Change detergent right  
away.  
brown or blue  
discoloration; film  
cannot be wiped off.  
Glasses are dull and Glasses are not dishwasher There is no remedy.  
discolored; film  
safe. The surface is  
Only use dishwasher safe  
glasses.  
cannot be wiped off. affected.  
Tea or lipstick stains The wash temperature of  
Select a program with a  
have not been  
completely removed. too low.  
The detergent has a low  
the selected program was higher wash temperature.  
Use a different detergent.  
bleaching effect.  
Plastics are  
discolored.  
Natural dyes e.g. from  
carrots, tomatoes or  
Use more detergent (see  
"Detergent").  
ketchup may be the cause. Discoloration is permanent.  
Not enough detergent was  
used to break down natural  
dyes.  
There are rust stains The affected items are not There is no remedy!  
on cutlery.  
corrosion resistant.  
Use only dishwasher safe  
cutlery.  
No program was run after  
refilling salt. Salt residuals  
got in the wash cycle.  
Start the "Express" program  
without a load after refilling  
salt.  
The salt container lid was  
not screwed on properly.  
Reseat it making sure it  
screws back on correctly.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
Repairs  
MieleCare  
In the event of a fault which you cannot  
correct yourself please contact the  
Miele Service Department at the phone  
number on the back of this booklet.  
(USA only)  
MieleCare, our Extended Service  
Contract program, gives you the  
assurance of knowing that your  
^ Please quote the model type and  
appliance investment is covered by  
5 years of worry free ownership.  
MieleCare is the only Extended Service  
Contract in the industry that guarantees  
repairs by a Miele Authorized Service  
Provider using genuine Miele parts.  
Only genuine Miele parts installed by  
factory trained professionals can  
guarantee the safety, reliability, and  
longevity of your Miele appliance.  
number of your appliance.  
These can be found on the data plate  
along the right edge of the door.  
PC Update  
The Program Correction (PC) allows a  
technician to update the dishwasher to  
make use of new technology.  
Please note that unless expressly  
approved in writing by Miele’s Service  
department, Extended Service  
Contracts offered by other providers for  
Miele products will not be recognized  
by Miele. Our goal is to prevent  
unauthorized (and untrained) service  
personnel from working on your Miele  
products, possibly doing further  
damage to them, you and/or your  
home.  
When, for example, technological  
developments offer advanced  
modifications to your existing program  
cycles a service technician will be able  
to input these into your machine  
controls via the indicator light marked  
PC. Miele will provide information when  
such possibilities become available.  
To learn more about MieleCare  
Extended Service Contracts, please  
contact your appliance dealer or visit  
us online at:  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Transport  
To transport the dishwasher, e.g. when  
moving to a new home, note the  
following:  
– Empty the dishwasher.  
– Secure any loose parts, e.g. hoses,  
cables, cutlery baskets.  
– Transport the dishwasher in the  
upright position. If unavoidable it  
may be transported on its back. Do  
not transport it on its side or on the  
door. Residual water in the machine  
could leak and cause electrical  
damage.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User Maintenance Instructions  
To prevent accidents  
and appliance damage,  
read these instructions  
before  
installation or use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Exterior  
Check and clean your dishwasher  
regularly. This will help avoid faults  
and problems.  
^ Only use a conditioner suitable for  
your kitchen cabinetry.  
^ Clean wood with a damp cloth and  
wipe dry.  
,Abrasive cleaning agents,  
all-purpose cleaners, thinner or  
ammonium cleaners should not be  
used on the dishwasher.  
Clean the exterior with a solution of  
warm water and liquid soap applied  
with a soft sponge. Dry with a soft  
cloth.  
They will damage the surface.  
Wash cabinet  
Glass cleaners may be used to  
clean the exterior. However do not  
allow them to sir or puddle, this can  
cause damage to the surface.  
Remove the cleaner promptly.  
Generally, the wash cabinet is self  
cleaning if the correct amount of  
detergent is used.  
The wash cabinet can be cleaned with  
a dishwasher cleaner such as "Dis  
Cleaner" available from your Miele  
To prevent damage to your appliance  
avoid the following:  
– cleaners containing soda, ammonia,  
thinners, or chlorides  
Door and the door seal  
^ Wipe the door seals regularly with a  
– cleaners containing descaling  
agents or lime removers,  
damp cloth to remove food deposits.  
^ Food residue and spilled liquids  
should be wiped from the sides of the  
dishwasher door. These are outside of  
the wash cabinet and are not cleaned  
by water from the spray arms.  
– abrasive cleaners,  
– stainless steel cleaners,  
– dishwasher soap (powder),  
– caustic (oven) cleaners,  
– scouring pads, steel wool, hard  
brushes,  
Control panel  
^ The plastic control panels should  
only be wiped with a damp cloth or  
suitable cleaning agent designed for  
use on plastic.  
– metal scrapers,  
– steam cleaning products.  
,The appliance and front controls  
are not scratch proof.  
Remove spills immediately.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Triple filter system  
The triple filter system in the base of the  
wash cabinet prevents food from being  
redeposited on dishes. It also protects  
the circulation pump from damage  
caused by foreign objects (e.g. broken  
glass, bones). During normal use, the  
filter system is self-cleaning.  
,The machine must not be used  
without all the filters in place!  
^ Check and clean the filter system  
periodically for any trapped or  
foreign objects.  
^ Turn the handle counterclockwise to  
release the triple filter system a.  
The level of soiling and time it takes  
before the filters need cleaning will vary  
depending on your household usage.  
^ Lift the filter combination out of the  
machine b. Remove any solid  
particles and rinse under running  
water. Scrub with a nylon brush if  
necessary.  
^ Turn off the dishwasher before  
cleaning.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
To clean the inside of the filter, the flap  
must be opened.  
^ Return the filter so it lies flat in the  
base of the wash cabinet.  
^ Push the clips together a and open  
the flap b.  
^ Lock the filter by turning the handle  
clockwise.  
^ Rinse under running water.  
,The triple filter system must be  
inserted and locked into place.  
Large particles could get in the  
circulation system and cause a  
blockage.  
^ Close the flap so that the clip  
engages.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the spray arms  
^ Pull the lower spray arm firmly  
upwards to remove.  
Sometimes particles of food get stuck  
in the spray arm jets. The spray arms  
should be inspected and cleaned every  
4 - 6 months.  
^ Turn off the dishwasher before  
cleaning.  
Removing the spray arms  
^ Remove the cutlery tray (if present).  
^ Push the upper spray arm up to  
engage the inner ratchet and  
unscrew the spray arm.  
^ Use a pointed object such as a  
toothpick to push food particles into  
the spray arm jets.  
^ Lift up the middle spray arm, a, to  
engage the ratchet and unscrew the  
spray arm, b.  
^ Remove the lower basket.  
^ Rinse thoroughly under running  
water.  
^ Return the spray arms and check that  
they rotate freely.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the water inlet filter  
A filter is incorporated into the intake  
hose attached to the dishwasher’s shut  
off valve. If your water is hard or the  
pipes contain sediment, this filter may  
clog and prevent enough water from  
entering the wash cabinet.  
,The plastic housing of the water  
connection contains electrical  
wiring.  
Do not cut the intake hose or  
submerge it in liquid.  
^ Carefully remove the rubber seal.  
Installing an in-line water filter  
^ Remove the filter using needle nose  
pliers and rinse it under running  
water.  
If your water contains a large number of  
insoluble substances, a filter between  
the water valve and the intake hose  
connection is recommended. These  
filters can be purchased from Miele.  
^ Reinsert the filter and seal. Make sure  
they are seated correctly.  
^ Screw the intake hose back on the  
water valve, checking that it is not  
cross-threaded.  
Cleaning the filter  
^ Turn off the dishwasher and pull the  
plug.  
^ Slowly turn on the water supply and  
^ Turn off the water supply.  
test for leaks.  
^ Unscrew the intake hose.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and Care  
Cleaning the drain pump and  
non-return valve  
If the dishwasher is not completely  
drained at the end of a program, the  
drain pump or non-return valve may be  
blocked.  
^ Turn off the dishwasher and pull the  
plug.  
^ Remove the triple filter (see "Triple  
filter system").  
^ Use a cup or bowl to scoop water out  
of the wash cabinet.  
The drain pump is beneath the  
non-return valve (see arrow).  
^ Remove all foreign objects from the  
drain pump (glass or bone splinters).  
^ Before returning the non-return valve,  
check that the drain pump is not  
blocked. Spin the propeller several  
times in both directions to check for  
obstructions.  
^ Carefully reinsert the non-return valve  
and secure it with the locking clamp.  
,Make sure the locking clamp  
clicks into place!  
^ Tilt the locking clamp to the side a.  
^ Pull out the non-return valve b and  
rinse it under running water.  
^ Remove all foreign objects from the  
non-return valve.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation Instructions  
Please refer to the Installation Diagram supplied with these instructions.  
To comply with IEC sound testing protocols, please contact Miele for additional  
instructions.  
Information is subject to change. Please refer to our website to obtain the most  
current product specification, technical & warranty information.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Help to protect the environment  
Disposal of the packing  
material  
Disposal of an old machine  
Old appliances may contain materials  
that can be recycled. Please contact  
your local recycling authority about the  
possibility of recycling these materials.  
The cardboard box and packaging  
protect the appliance during shipping.  
These materials are biodegradable and  
recyclable. Please recycle.  
Ensure that the appliance presents no  
danger to children while being stored  
for disposal. Before discarding an old  
appliance, unplug it from the outlet, cut  
off its power cord and remove any  
doors to prevent hazards.  
Ensure that any plastic wrappings,  
bags etc. are disposed of safely and  
kept out of the reach of children.  
Danger of suffocation!  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous.  
,Improper connection of the  
equipment grounding conductor  
can result in electric shock. Do  
not modify the plug provided with  
the appliance; if it will not fit the  
outlet, have a proper outlet  
Check that the voltage, frequency  
and fuse rating shown on the data  
plate match the household mains  
supply.  
installed by a qualified electrician.  
If there is any question  
concerning the proper electrical  
connection or grounding of this  
appliance to the power supply,  
please consult a licensed  
The power outlet must be accessible  
after installation. Do not use an  
extension cord to connect the  
dishwasher to the mains. Danger of  
overheating! See data plate on the  
right side of the door.  
electrician or call Miele’s  
Technical Service Department:  
U 1-800-999-1360  
A damaged power cord must only  
be replaced with a genuine Miele  
cord by a Miele service technician  
or a qualified technician.  
V 1-800-565-6435  
Specifications  
The dishwasher comes equipped  
with a 4 ft (1.2 m) power cord with a  
molded plug for connection to 120 V,  
60 Hz, 15 A grounded receptacle.  
GROUNDING INSTRUCTIONS  
THIS APPLIANCE MUST BE  
GROUNDED.  
In the event of a malfunction or  
breakdown, grounding will reduce the  
risk of electric shock by providing a  
path of least resistance for the electrical  
current. This appliance is equipped  
with a cord having an equipment  
grounding conductor and a grounding  
plug. The plug must be plugged into an  
appropriate outlet that is installed and  
grounded in accordance with all local  
codes and ordinances.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Waterproof system  
Connection to the water  
supply  
All Miele dishwashers have a safety  
valve located on the incoming water  
line and a sealed underside with a  
water sensor.  
,Installation, repairs and other  
work by unqualified persons could  
be dangerous.  
If a fault occurs, the water intake is  
stopped and the drain pump is  
activated. Water damage, if any, is  
minimized.  
,Do not drink water from the  
dishwasher!  
Providing the dishwasher was installed  
correctly by a Miele technician, the  
waterproof system will protect you from  
water damage throughout the lifetime of  
the machine.  
– The dishwasher can heat its own  
water to the temperature required by  
the wash program. This allows for  
connection of the machine to either a  
hot (max. 140°F / 60°C) or cold water  
source.  
For lowest energy consumption and  
fastest possible wash times connect  
the dishwasher to a hot water  
source. All programs use hot water in  
the rinse cycles.  
– The inlet hose is approximately 5 ft.  
(1.5m) long.  
– The water inlet hose comes  
equipped with a 3/4" female hose  
thread connector. This can be  
directly connected to a water supply  
with 3/4" MHT (male hose thread  
ends).  
If not connected directly to a water  
supply valve, an appropriate  
adapter (not required) is required.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
– Water pressure: Must be between  
4.5 - 145 psi (0.3 - 10 bar).  
Ensure that the water connection is  
secure after the first use.  
– If the water pressure if lower, a  
"Water Intake" notification will be  
shown. See "Frequently Asked  
Questions" for more information.  
,To prevent damage to the  
dishwasher, it must only be  
connected to a fully vented drainage  
system.  
– If the water pressure is higher than  
shown, a pressure reducing valve  
must be used.  
,Do not cut the intake hose. It  
contains electrical wiring. If the hose  
is cut, the dishwasher will not work.  
There will be a water leak and you  
could be injured. If the hose is too  
long, coil it neatly and place it  
behind the machine.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Drainage  
– The drain hose must not be  
shortened.  
– The machine comes equipped with a  
built-in non-return valve on the  
discharge side to prevent waste  
water from flowing back into the  
dishwasher.  
,Make sure the hose is not kinked  
or cut when pushing the machine  
under the countertop.  
– The dishwasher is equipped with a  
5 ft (1.5 m) flexible drain hose with an  
internal diameter of 7/8" (22 mm).  
Venting the drainage system  
If the dishwasher drain hose is  
connected to a floor drain or to a drain  
pipe that is less than 8" (20 cm) above  
the floor, the drain must be vented.  
Otherwise the water inside the  
dishwasher may siphon out during the  
wash program.  
– Drain hose extensions and adapters  
can be ordered from Miele.  
The maximum drain hose length is  
13 ft. (4 m), max. drain height: 39"  
(1 m).  
– Use the clamp provided to attach the ^ Open the dishwasher door and  
hose to the dishwashers P trap or  
disposal connection (see the  
"Installation Diagram").  
remove the lower basket.  
The hose must always be attached  
on the sink side of the P trap.  
When attaching the hose to a  
garbage disposal fitting, make sure  
the plug which is normally blocking  
the fitting is knocked out or  
removed.  
– The hose can be angled to the left or  
right side at the rear of the machine.  
^ Pull the lower spray arm firmly  
– The existing nipple that the drain  
hose is connected to may be  
upwards to remove.  
^ Cut off the vent cap located at the  
right rear of the triple filter system, as  
illustrated.  
designed for various hose diameters.  
If the nipple diameter is to large or to  
small it should be replaced or an  
adapter may be used. If the nipple  
extends more than 2" (50 mm) into  
the drain hose it should be  
shortened, or the hose could clog.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved / 1511  
G4570 /  
M.-Nr. 07 909 300 / 02  
INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST  
CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Coffeemaker CM 5000 User Manual
Mr Coffee Coffeemaker CBTU45 User Manual
MTD Lawn Mower OEM 190 625 User Manual
Multiquip Saw SP 6457 TD User Manual
Multiquip Saw TP7X User Manual
Murphy Portable Generator PG 03082H User Manual
National Instruments Network Card NI WLS ENET 9163 User Manual
Nokia Network Card AD 42W User Manual
Panasonic Digital Camera AW PH400 User Manual
Panasonic DVD Recorder DMR ES15 User Manual