Miele Dishwasher G 1XXX User Manual

Operating instructions  
for dishwashers  
To avoid the risk of accidents or  
damage to the appliance it is  
essential to read these instructions  
as well as the installation plan before  
it is installed and used for the first time.  
G
M.-Nr. 06 702 810  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Adding detergent. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Selecting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Starting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Programme sequence indicators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
At the end of a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Switching off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Unloading the dishwasher. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Interrupting a programme . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Changing a programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Tab function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Factory default setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Adjust sensor wash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning the wash cabinet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning the door and the door seal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning the door front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Cleaning the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Cleaning the filters in the wash cabinet. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Cleaning the spray arms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Problem solving guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
The dishwasher does not fill/drain. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Noises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Unsatisfactory washing result . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Problem solving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Cleaning the water inlet filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Cleaning the drain pump and non-return valve. . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
After sales service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Repairs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Future updates (PC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
For testing institutes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Optional accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Electrical connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58  
Plumbing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Connection to the water supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Drainage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
Appliance overview  
aUpper spray arm (not visible)  
bCutlery tray (depending on model)  
cUpper basket  
gFilter combination  
hData plate  
iChild safety lock in door grip (not  
visible)  
dMiddle spray arm  
jRinse aid reservoir  
eAir inlet for drying  
(depending on model)  
kDual compartment detergent  
dispenser  
fLower spray arm  
lSalt reservoir  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description of the appliance  
Control panel  
aProgrammes  
fCheck/Refill indicators  
bDisplay  
gStart/Stop button with indicator light  
cTab indicator  
hDelay start button  
with indicator light  
dProgramme sequence indicators  
eOn/Off button s  
iTab button  
jProgramme selector button  
This instruction book applies to several different dishwasher models.  
The specific dishwasher models below are referred to as follows:  
G 1220 etc. = G 1XXX  
G 2220 etc. = G 2XXX  
The model numbers G 1XXX and G 2XXX used in this book refer to the model  
designation specified on the data plate of the appliance (and not the  
description on the control panel).  
The data plate is located at the top right hand side of the door.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Delivery  
This appliance conforms to current  
Before setting up the appliance,  
check it for any externally visible  
damage. Under no circumstances  
should you use a damaged appliance.  
A damaged appliance could be  
dangerous.  
safety requirements. Inappropriate  
use can, however, lead to personal  
injury and damage to property. To  
avoid the risk of accidents and  
damage to the appliance, please  
read these instructions carefully  
before using it for the first time. They  
contain important information on its  
safety, use and maintenance.  
Please ensure that the packaging  
material is offered for recycling.  
Keep these instructions in a safe  
place for future reference, and pass  
them on to any future user.  
Installation  
The dishwasher must be installed  
and connected in compliance with  
the installation plan.  
Correct usage  
The dishwasher must only be  
plugged into the electricity supply  
via a suitable switched socket. The  
electrical socket must be easily  
accessible after the dishwasher is  
installed so that it can be disconnected  
from the electricity supply at any time.  
(See "Electrical connection").  
This dishwasher is intended  
exclusively for cleaning domestic  
crockery and cutlery in a domestic  
household. Using it for purposes other  
than those for which it was designed,  
as well as any alterations or  
conversions to the appliance would be  
unauthorised and could cause harm.  
The manufacturer cannot be held liable  
for damage resulting from improper or  
incorrect use of the appliance.  
There must be no electrical  
sockets behind the dishwasher.  
Danger of overheating and fire risk if  
the dishwasher were to be pushed up  
against a plug.  
Transport  
In order to ensure stability,  
built-under and integrated  
dishwashers must only be installed  
under a continuous worktop which is  
secured to adjacent cabinetry.  
Should you ever need to move the  
dishwasher, e.g. when moving  
house, note the following:  
– Empty the dishwasher,  
– Secure any loose parts, e. g. hoses,  
mains cable, cutlery baskets, lower  
basket  
– Transport the dishwasher in the  
upright position only.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
The dishwasher must not be  
installed under a hob. The high  
This equipment may only be used  
in mobile installations such as  
radiant temperatures which are  
ships, caravans, aircraft etc. if a risk  
assessment of the installation has been  
carried out by a suitably qualified  
engineer.  
sometimes generated by a hob could  
damage the dishwasher. For the same  
reason it should not be installed next to  
open fires or other appliances which  
give off heat, such as heaters etc.  
A damaged appliance could be  
dangerous. Switch off at the mains  
and call your Miele supplier or the Miele  
Service Department.  
If you want to convert your  
freestanding dishwasher to a  
built-under ("U") model, you will need to  
order the appropriate conversion kit. If  
you remove the existing plinth, you  
must replace it with a U-model plinth.  
This is necessary to avoid the risk of  
injury caused by protruding metal  
parts.  
The plastic housing of the water  
connection contains an electrical  
component. The housing must therefore  
not be dipped in water.  
There are live wires in the water  
inlet hose. Never cut the water inlet  
hose, even if it is too long.  
Do not connect the dishwasher to  
the mains supply until it has been  
fully installed.  
Do not connect the appliance to  
the mains electricity supply by an  
extension lead. Extension leads do not  
guarantee the required safety of the  
appliance (e.g. danger of overheating).  
Before connecting the appliance,  
check that the connection data on  
the data plate (voltage and connected  
load) match the mains electricity  
supply. If in any doubt, consult a  
qualified electrician.  
Use  
Do not use solvents in the  
dishwasher. Danger of explosion.  
The electrical safety of this  
appliance can only be guaranteed  
when continuity is complete between  
the appliance and an effective earthing  
system. It is most important that this  
basic safety requirement is regularly  
tested and where there is any doubt,  
the electrical system in the house  
should be checked by a qualified  
electrician.  
Do not inhale or ingest dishwasher  
detergent! Dishwasher detergents  
can cause burning in the nose, mouth  
and throat if swallowed, or inhibit  
breathing. Consult a doctor immediate-  
ly if detergent has been swallowed or  
inhaled.  
The manufacturer cannot be held liable  
for the consequences of an inadequate  
earthing system (e.g. electric shock).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Avoid leaving the door open  
unnecessarily, as you could trip  
On models with "Delay start", make  
sure that the dispenser is dry  
over it.  
before adding detergent. Wipe dry if  
necessary. Detergent will clog if poured  
into a damp dispenser and may not be  
thoroughly dispensed.  
Do not use liquid detergent when  
selecting Delay start, as it can run into  
the dishwasher before it is required.  
Do not sit or lean on the opened  
door. This could cause the  
dishwasher to tip and be damaged and  
you could get injured.  
Only use detergent and rinse aid  
formulated for domestic  
dishwashers. Do not use washing-up  
liquid.  
Safety with children  
This appliance is not a toy! To  
avoid the risk of injury do not allow  
children to play in or around the  
dishwasher, or to operate it. There is  
also a danger that children playing  
might shut themselves in the  
dishwasher.  
In an appliance with a cutlery  
basket (depending on model)  
cutlery is cleaned and dried more  
efficiently if placed in the basket with  
the handles downwards. However, to  
avoid the risk of injury place knives and  
forks etc. with the handles upwards.  
Keep children away from  
detergents. Dishwasher detergents  
can cause burning in the mouth, nose  
and throat if swallowed, or inhibit  
breathing. Keep children away from the  
dishwasher when the door is open.  
There could still be detergent residues  
in the cabinet.  
Please only use special coarse  
grained dishwasher salt for  
reactivation, as other salts may contain  
insoluble additives which can impair  
the functioning of the softener.  
Plastic items which cannot  
withstand being washed in hot  
water, such as disposable plastic  
containers, or plastic cutlery and  
crockery should not be cleaned in the  
dishwasher. The high temperatures in  
the dishwasher may cause them to melt  
or lose shape.  
Consult a doctor immediately if your  
child has swallowed or inhaled  
detergent.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
To avoid damage to the  
appliance and other materials  
In countries where there are areas  
which may be subject to infestation  
by cockroaches or other vermin, pay  
particular attention to keeping the  
appliance and its surroundings in a  
clean condition at all times. Any  
damage caused by cockroaches or  
other vermin will not be covered by the  
guarantee.  
Do not fill the rinse aid reservoir  
with powder or liquid detergent.  
This will cause serious damage to the  
reservoir.  
Inadvertently filling the salt  
reservoir with powder or liquid  
dishwasher detergent always leads to  
serious damage to the water softener.  
Make sure you have picked up the  
correct packet of dishwasher salt  
before filling the salt reservoir!  
Repairs and maintenance  
Repairs may only be carried out by  
suitably qualified and competent  
technicians in accordance with current  
local and national safety requirements.  
Repairs and other work by unqualified  
persons could be dangerous.  
Do not use commercial or industrial  
detergents as these may damage  
material and there is a risk of severe  
chemical reaction.  
Always disconnect the appliance  
from the electrical supply for  
maintenance work (switch off at the wall  
socket and remove the plug).  
The Miele Waterproof System offers  
protection from water damage,  
provided the following conditions are  
met:  
If the connection cable is damaged  
it must be replaced with a Miele  
cable by a Miele approved service  
technician only.  
– The dishwasher is correctly installed  
and plumbed in.  
– The dishwasher is properly  
maintained and parts are replaced  
where it can be seen that this is  
necessary.  
Disposal of your old appliance  
When disposing of an old  
dishwasher first make it unusable.  
Disconnect, cut off the cable and the  
plug from the cable. Make the door lock  
inoperative by unscrewing the Torx  
screw, so that children cannot  
accidentally shut themselves in. Make  
appropriate arrangements for the  
disposal of the appliance.  
– The stopcock has been turned off  
when the appliance is not used for a  
longer period of time (e.g. during  
holidays).  
The Waterproof system will work even if  
the appliance is switched off. However,  
the appliance must remain connected  
to the electricity supply.  
The manufacturer cannot be held  
liable for damage caused by  
non-compliance with these Warning  
and Safety instructions.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the environment  
Disposal of the packing  
material  
It should be unplugged or  
disconnected from the mains electricity  
supply by a competent person. The  
plug must be rendered useless and the  
cable cut off directly behind it to  
prevent misuse. See the "Warning and  
Safety" section of this booklet for further  
details.  
The transport and protective packing  
has been selected from materials which  
are environmentally friendly for disposal  
and can normally be recycled. Ensure  
that any plastic wrappings, bags etc.  
are disposed of safely and kept out of  
the reach of babies and young  
Energy saving washing  
children. Danger of suffocation!  
Rather than just throwing these  
This dishwasher is exceptionally  
materials away, please ensure that they economical in its use of water and  
are recycled.  
electricity. You can make the most of  
your appliance by following these tips:  
Disposal of your old appliance  
^ If your household water system is  
suitable, this dishwasher can be  
connected to a hot water supply, for  
further economies. If the water is  
heated by for example, solar panels,  
this would be energy efficient.  
However, if your water is heated by  
electricity we would recommend  
connection to cold water.  
Electrical and electronic appliances  
often contain materials which, if  
handled or disposed of incorrectly,  
could be potentially hazardous to  
human health and to the environment.  
They are, however, essential for the  
correct functioning of your appliance.  
Please do not therefore dispose of your  
old appliance with your household  
waste.  
^ For most economical dishwashing  
make full use of the baskets without  
overloading the dishwasher.  
^ Choose the programme to suit the  
type of crockery being washed and  
the degree of soiling.  
^ Select the Energy save programme  
for energy-saving dishwashing.  
^ Follow the detergent manufacturer’s  
recommendations on detergent  
dosage.  
Please dispose of it at your local  
community waste collection / recycling  
centre and ensure that it presents no  
danger to children while being stored  
for disposal.  
^ When using powder or liquid  
detergent you can use 1/3 less  
detergent if baskets are only half full.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To open the door  
Child safety lock  
^ Press the release catch inside the  
door grip and pull forward.  
Use the child safety lock to prevent  
children opening the dishwasher door.  
If the door is opened during operation  
all functions are automatically  
interrupted.  
^ To lock the door, push the slide  
underneath the door grip to the right.  
^ To unlock the door, push the slide to  
the left.  
To close the door  
^ Push the baskets right in.  
^ Then lift the door upwards and push  
until it clicks into position.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Water softener  
The dishwasher is programmed at  
the factory for a water hardness level  
of 2.7 mmol/l (15 °d).  
In order to achieve good cleaning  
results, the dishwasher needs to  
operate with soft water. Hard water  
results in the build-up of calcium  
deposits on crockery and in the  
dishwasher.  
Mains water with a hardness level  
higher than 0.7 mmol/l (4 °d - German  
scale) needs to be softened. This takes  
place automatically in the integrated  
water softener.  
If this setting corresponds to the  
hardness of your water you do not need  
to do anything more.  
If your water is harder or softer, you will  
need to programme the water hardness  
level. See following section.  
– The water softener requires  
dishwasher salt.  
If you use "3 in 1" products in your  
dishwasher, you should still add salt  
in order to achieve optimum results.  
– The dishwasher must be  
programmed for the water hardness  
in your area.  
– Your local water authority will be able  
to advise you of the water hardness  
level in your area.  
Where the water hardness fluctuates  
e.g. between 6.7 - 9.0 mmol/l (37 -50 °d  
- German scale) always programme the  
dishwasher to the higher value  
(9.0 mmol/l in this example).  
In the event of a fault, it will help the  
service technician if you know the  
hardness of your local water supply.  
^ Enter the water hardness below:  
mmol/l or °d  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To programme the water hardness  
level  
The characters "p 1 5" will flash one  
after the other in the display.  
This means that the water hardness  
level has been set at 15 °d (2.7 mmol/l)  
(factory setting).  
Each time a button is pressed one of  
the indicator lights will flash and light  
up in the control panel. However, only  
the indicator lights mentioned in the  
following programming process stages  
are significant.  
The value which has been set for the  
water hardness is shown as a figure  
after the "p" in the display (see chart).  
^ Use the Start/Stop button to select  
the value which equates to your  
water hardness level.  
Each press on the button moves you  
up a level. When the highest water  
hardness level is reached, the setting  
starts from the beginning again.  
The programming procedure can be  
cancelled at any time by pressing the  
On/Off button s. The procedure can  
then be re-started from the beginning  
again.  
^ Switch the dishwasher off with the  
On/Off button s.  
^ Switch the dishwasher off with the  
On/Off button s.  
^ Press the Start/Stop button in and  
whilst holding it in switch the  
dishwasher on using the On/Off  
button s.  
Keep the Start/Stop button pressed in  
for at least four seconds until the  
"Start/Stop" indicator light comes on.  
If this does not happen, start the  
procedure from the beginning again.  
^ Press the Delay start button twice.  
The "Delay start" indicator will flash  
briefly twice at intervals.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
To call up the water hardness  
level in the display  
°d  
German  
scale  
mmol/l  
°f  
Value displayed  
^ Switch the dishwasher off with the  
On/Off button s.  
1
2
3
4
5
6
7
8
9
0.2  
0.4  
0.5  
0.7  
0.9  
1.1  
1.3  
1.4  
1.6  
1.8  
2.0  
2.2  
2.3  
2.5  
2.7  
2.9  
3.1  
3.2  
3.4  
3.6  
3.8  
4.0  
4.1  
4.3  
4.5  
4.7  
4.9  
5.0  
5.2  
5.4  
5.6  
5.8  
5.9  
6.1  
6.3  
6.5  
6.7-8.1  
2
4
5
7
9
1
2
3
4
5
6
7
8
^ Press the Start/Stop button in and  
whilst holding it in switch the  
dishwasher on using the On/Off  
button s.  
Keep the Start/Stop button pressed in  
for at least four seconds until the  
"Start/Stop" indicator light comes on.  
11  
13  
14  
16  
18  
20  
22  
23  
25  
27  
29  
31  
32  
34  
36  
38  
40  
41  
43  
45  
47  
49  
50  
52  
54  
56  
58  
59  
61  
63  
65  
66-80  
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37-45  
46-60  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
45  
60  
70  
^ Press the Delay start button six times.  
The "Delay start" indicator will flash  
briefly six times at intervals.  
Characters will flash in sequence in the  
display.  
The figure(s) after the "p" is the value for  
the water hardness level which has  
been set (see chart).  
^ Switch the dishwasher off with the  
On/Off button s.  
8.3-10.8 82-107  
61-70 11.0-12.6 109-125  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Before using the appliance for  
the first time you require:  
If the water in your area is very soft  
and constantly lower than  
0.7 mmol/l (4 °d) you do not need  
to add dishwasher salt.  
The water softener must, however,  
still be programmed to correspond  
to the water hardness level in your  
area.  
– approx. 2 litres of water,  
– approx. 2 kg dishwasher salt,  
– domestic dishwasher detergent,  
– rinse aid formulated for domestic  
dishwashers.  
Important: Before filling the salt  
reservoir with dishwasher salt for the  
first time, you must fill it with  
approx. 2 litres of water to enable  
the salt to dissolve. Once the  
dishwasher has been used, there is  
always sufficient water in the  
reservoir.  
Every dishwasher is tested at the  
factory.  
There will be residual water in the  
appliance from this test. It is not an  
indication that it has been previously  
used.  
Filling the salt reservoir  
,Inadvertently filling the salt  
reservoir with powder or liquid  
The water softener requires  
dishwasher salt. If you use "3 in 1"  
tablets in your dishwasher you  
should still add salt in order to  
achieve optimum results. The  
amount of salt used is reduced to  
between 1/4 and 1/3 of the normal  
amount if the "3 in 1" function is  
selected.  
dishwasher detergent always leads  
to serious damage to the water  
softener. Make sure you have picked  
up the correct packet of dishwasher  
salt before filling the salt reservoir!  
,Only use special coarse grained  
dishwasher salt for reactivation. Do  
not use other salts such as cooking  
salt, agricultural grade or gritting  
salt. These may contain insoluble  
additives which can impair the  
functioning of the water softener.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
^ Remove the lower basket and  
unscrew the salt reservoir cap.  
Salt indicator  
Only open the salt reservoir when  
you want to fill it with dishwasher salt  
as water or salt solution will run out  
of the reservoir when the cap is  
removed.  
^ Fill the reservoir with approx. 2 litres  
of water (first use only).  
^ Fill the salt reservoir with dishwasher  
salt when the salt indicator light  
comes on. (If it comes on during a  
programme, wait until the end of the  
programme).  
After the reservoir has been filled, the  
water softener is automatically  
reactivated the next time the  
dishwasher is run. The salt indicator  
light may still be illuminated during this  
process. It will go out once the salt  
concentration has reached the correct  
level.  
^ Place the funnel provided over the  
salt reservoir and carefully fill with salt  
until the reservoir is full. The salt  
reservoir holds approx. 2 kg of salt  
depending on the brand used.  
,After filling the salt reservoir, run  
the "Quick wash" programme  
immediately (without any crockery in  
the dishwasher) to remove any  
traces of salt water from the cabinet.  
As the salt reservoir is filled, displaced  
water will overflow.  
^ Clean any excess salt from around  
the reservoir opening and then screw  
the cap on again firmly.  
^ Run the "Quick wash" programme  
immediately (without any crockery in  
the dishwasher) to remove any traces  
of salt water from the cabinet.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Rinse aid  
Adding rinse aid  
Rinse aid is necessary to ensure water  
does not cling and leave marks on  
crockery during the drying phase and  
helps crockery dry faster after it has  
been washed.  
Rinse aid is poured into the storage  
reservoir and the amount set is  
dispensed automatically.  
,Inadvertently filling the rinse aid  
reservoir with powder or liquid  
detergent always causes serious  
damage to the reservoir. Only pour  
rinse aid formulated for domestic  
dishwashers into the reservoir.  
^ Press the button on the lid of the  
rinse aid reservoir in the direction of  
the arrow until the flap springs open.  
Alternatively, it is possible to use  
– Household vinegar with a max. 5%  
acid content  
or  
– Liquid citric acid up to 50% acid  
content.  
The resulting rinsing and drying quality  
will not, however, be as good as when  
rinse aid is used.  
,Do not use vinegar with a higher  
acid content (e.g. vinegar essence  
25% acid). This would damage the  
dishwasher.  
If you only ever use "2 in 1" or "3 in 1"  
products in your dishwasher you do  
not need to add rinse aid.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Rinse aid indicator  
When the light comes on the reservoir  
contains sufficient rinse aid for 2 - 3  
programmes only.  
^ Add rinse aid only until it is visible in  
the opening.  
The rinse aid reservoir holds approx.  
110 ml.  
^ Add rinse aid in plenty of time.  
^ Close the flap firmly so that it clicks  
into place. Otherwise water would  
enter the rinse aid reservoir during a  
programme.  
If the "2 in 1" or "3 in 1" function has  
been selected, the Rinse aid  
indicator does not light up (see  
"Operation - Tab function").  
^ Wipe up any spilled rinse aid. This  
prevents over-foaming occurring  
during the next programme.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
Setting the rinse aid dosage  
^ Press the Delay start button three  
times.  
You can adjust the rinse aid dosage for  
best results.  
The "Delay start" indicator will flash  
briefly three times at intervals.  
The rinse aid dosage can be set from  
approx. 0-6 ml. It is set to a  
recommended setting of approx. 3 ml  
at the factory.  
p 3 will flash in the display.  
This means that the rinse aid dosage  
has been set at 3 ml at the factory.  
If spots appear on crockery and  
glassware:  
The dosage set will show in the display  
after the p.  
^ Increase the rinse aid dosage.  
^ Use the Start/Stop button to select  
the rinse aid dosage you want.  
The dosage amount alters each time  
you press the button.  
If clouding or smearing appears on  
crockery and glassware:  
^ Decrease the rinse aid dosage.  
The programmed rinse aid dosage is  
now stored in memory.  
^ Switch the dishwasher off with the  
^ Switch the dishwasher off with the  
On/Off button s.  
On/Off button s.  
^ Press the Start/Stop button in and  
whilst holding it in switch the  
dishwasher on using the On/Off  
button s.  
Keep the Start/Stop button pressed in  
for at least four seconds until the  
"Start/Stop" indicator light comes on.  
If this does not happen, start the  
procedure from the beginning again.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Note  
– Deep based items should be placed  
at an angle so that water can run off  
them freely.  
Remove coarse food residues from  
crockery.  
– The spray arms must not be blocked  
by items which are too tall or hang  
through the baskets.  
There is no need to rinse items under  
running water.  
If in doubt, test for free movement by  
manually rotating the spray arms.  
,Do not wash items soiled with  
ash, sand, wax, lubricating grease  
or paint in the dishwasher. Ash does  
not dissolve and is distributed in the  
wash cabinet. Wax, sand, lubricating  
grease and paint cause damage to  
the dishwasher.  
– Make sure that small items cannot  
fall through the holders in the  
baskets. Small items, e.g. lids,  
should therefore be placed in the  
cutlery tray or cutlery basket  
(depending on model).  
Crockery can be loaded anywhere in  
the baskets, but the following notes  
should be observed:  
Some foodstuffs may contain natural  
dyes, e.g. carrots, tomatoes or  
ketchup. Plastic items in the  
dishwasher may discolour if large  
quantities of these foodstuffs find  
their way into the appliance on the  
crockery. The stability of plastic  
items is not affected by this  
discolouration.  
– Do not place crockery and cutlery  
inside other pieces where they may  
be concealed.  
– Load the crockery so that water can  
access all surfaces. This ensures  
that it is properly cleaned.  
– Make sure that all items are securely  
positioned.  
– Hollow items such as cups, glasses,  
pans, etc. must be inverted in the  
basket.  
Tall, narrow, hollow items, e.g.  
champagne glasses, should be  
placed in the centre of the basket to  
ensure better water coverage.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Items not suitable for  
dishwashers:  
We recommend:  
– When purchasing new crockery and  
cutlery, make sure they are  
dishwasher-proof.  
– Wooden cutlery and crockery or  
items with wooden parts: these may  
discolour and fade. The glue used in  
these items is not dishwasher-proof  
and wooden handles may come  
loose after being washed in a  
dishwasher.  
– If delicate glassware is washed in the  
dishwasher ensure that only very low  
temperatures are used (see  
programme chart), or a special  
glass-care programme is used  
(depending on model). This will  
reduce the risk of clouding.  
– Craft items, antiques, valuable vases  
and decorative glassware are also  
not suitable for dishwashers.  
– Wash particularly delicate glassware  
by hand.  
– Plastic items which are not heat  
resistant. The high temperatures in  
the dishwasher may cause them to  
melt or lose shape.  
Please note  
Silverware previously cleaned with a  
silver polish may still be damp or  
spotted at the end of a programme,  
where water has not run off smoothly. It  
may need rubbing dry with a soft cloth.  
– Copper, brass, tin and aluminium  
items may discolour or become matt.  
– Colours painted over a glaze may  
fade after a number of washes.  
Silver which has been in contact with  
foods containing sulphur can discolour.  
These include egg yolk, onions,  
mayonnaise, mustard, pulses, fish, fish  
brine and marinades.  
– Clouding may occur on glasses after  
frequent washing. Do not wash  
delicate glassware, or glassware  
containing lead crystal in a  
dishwasher.  
,Aluminium components (e.g.  
grease filters) must not be cleaned  
with caustic alkaline commercial or  
industrial cleaning agents. These  
may damage the material, or in  
extreme cases, cause a severe  
chemical reaction. See section  
"Adding detergent" for information  
on suitable detergents.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Upper basket  
Hinged cup rack  
^ To make room for tall items raise the  
rack upwards.  
,For safety reasons, do not  
operate the dishwasher without the  
upper and lower baskets in place.  
Positioning rail (depending on model)  
Glasses can be arranged along the  
positioning rail to give them some  
support during the programme.  
^ Use the upper basket for small,  
lightweight and delicate items such  
as cups, saucers, glasses, dessert  
bowls, etc. Shallow pans or casserole  
dishes can also be placed in the  
upper basket.  
^ Raise the rail, and lean the glasses  
against it.  
The positioning rail can be flipped over  
to the middle of the basket for easy  
sorting and removing of crockery.  
^ Long items such as soup ladles,  
mixing spoons and long knives  
should be placed lying down across  
the front of the upper basket.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Adjusting the upper basket  
Depending on the setting of the upper  
basket, the following plate dimensions  
can be accommodated.  
In order to gain more space for taller  
pieces of crockery in the bottom or  
upper basket, the upper basket can be  
adjusted on three levels with 2 cm  
between each level.  
Dishwasher with cutlery tray  
(see data plate for model number)  
Upper  
basket  
level  
Plate Ø in cm  
The upper basket can also be set at an  
angle with one side high and the other  
side low. Ensure however, that the  
basket can slide smoothly into the  
cabinet. It is better to adjust the basket  
before loading it.  
Upper basket  
Lower  
basket  
G1XXX G2XXX  
Top  
15  
17  
19  
19  
21  
23  
31  
29  
27  
Middle  
Bottom  
^ Pull out the upper basket.  
Dishwasher with cutlery basket  
(see data plate for model number)  
Upper  
basket  
level  
Plate Ø in cm  
Upper basket  
Lower  
basket  
G1XXX G2XXX  
Top  
20  
22  
24  
24  
26  
28  
31  
29  
27  
Middle  
Bottom  
^ Pull upwards on the levers at either  
side of the upper basket.  
^ Adjust the basket to the desired  
height.  
^ Then push the levers securely back  
down into position.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Lower basket  
Hinged spiked insert  
For larger and heavier items such as  
plates, serving platters, saucepans,  
bowls, etc.  
This insert is used for washing plates  
and saucers.  
Small items such as saucers can also  
be placed in the lower basket.  
Do not place thin, delicate glassware in  
the lower basket.  
Both sides of the rear section of the  
spiked insert can be lowered to make  
more room for large items, e.g. pots,  
pans and dishes.  
Dishwashers with cutlery tray  
^ Press the yellow lever downwards a  
and then lower the spikes b.  
Dishwashers with cutlery basket  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
To remove the hinged spike insert  
Bottle holder (depending on model)  
You can remove the spiked insert to  
make more room for larger items of  
crockery, e.g. a large, shallow pot, or  
for another type of insert.  
The bottle holder can be used to wash  
narrow items, e.g. milk and baby  
bottles.  
^ Place the bottle holder as shown in  
the bottom basket. If placed  
To remove an insert a  
anywhere else, water will not be able  
to access the bottle properly, and  
cleaning results will be impaired.  
^ Pull upwards by the handle as  
shown.  
To refit it b  
^ Fit the insert into the lower basket  
with the hooks going under the long  
cross piece as illustrated.  
^ Press down on the handle until the  
insert is securely held in position.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery  
Cutlery tray (depending on model)  
If spoon handles do not fit between the  
holders, then place them the other way  
round.  
^ Arrange the cutlery in the tray as  
shown.  
To make unloading much easier, cutlery  
should be grouped in zones, one for  
knives, one for forks, one for spoons,  
etc.  
Spoon heads should be placed in  
contact with at least one of the serrated  
retainers on the base of the cutlery tray  
to ensure that water runs off them freely.  
The upper spray arm must not be  
blocked by items which are too big  
(e.g. cake slices).  
The cutlery tray insert is removable.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Loading the dishwasher  
Cutlery basket (depending on model)  
^ Fit it into the cutlery basket if  
required.  
^ To avoid the risk of injury, knives and  
forks should be placed with the  
handles upwards in the basket.  
However, cutlery placed handle  
down in the basket will come out  
cleaner and drier.  
^ Place small spoons in the individual  
slots to either side of the cutlery  
basket.  
Cutlery insert for the cutlery basket  
Use the insert supplied for heavily  
soiled spoons.  
The insert separates the items so that  
they can be more easily accessed by  
water.  
^ Insert cutlery with the handles facing  
downwards, and distribute them  
evenly along the insert.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Detergent  
,Avoid inhalation of powder  
,Only use detergents formulated  
for domestic dishwashers. Do not  
use washing up liquid.  
detergents and do not ingest  
dishwasher detergent. Dishwasher  
detergents can cause burning in the  
nose, mouth and throat if swallowed,  
or inhibit breathing. Consult a doctor  
immediately if detergent has been  
swallowed or inhaled.  
^ You can use conventional powder  
detergent, tablets or liquid  
dishwasher detergent.  
Refer to the dosing instructions given  
by the manufacturer on the  
packaging.  
Keep detergent and other  
household agents out of the reach of  
children at all times. Keep children  
away from the dishwasher when the  
door is open. There could still be  
detergent residues in the cabinet. To  
avoid the danger of children coming  
into contact with the dishwasher  
detergent, only add detergent just  
before starting the programme and  
close the door, activating the child  
safety lock (if your dishwasher is  
fitted with one).  
^ Put the detergent into the dispenser  
compartment.  
^ Do not use tablet detergent on the  
"Quick" programme, as the tablets  
will not dissolve properly.  
Failure to dispense the  
recommended amount of detergent  
may impair cleaning results.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Adding detergent  
For information  
Compartment I holds max. 10 ml,  
Compartment II holds max. 50 ml.  
There are markings in compartment II  
to assist with dispensing: 20, 30. The  
marks indicate a level of approx. 20 or  
30 ml when the door is open in a  
horizontal position.  
^ Press the opening catch on the  
detergent dispenser. The flap will  
spring open.  
The flap is always open at the end of a  
programme.  
^ Add the required amount of  
detergent and close the flap.  
^ Make sure that the detergent  
packaging is properly closed after  
use to avoid it getting damp and  
becoming lumpy.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Switching on  
Starting a programme  
^ Make sure the spray arms are not  
obstructed.  
^ Select the programme required using  
the programme selector button.  
^ Close the door.  
The indicator light for the programme  
selected comes on.  
The programme duration will appear in  
the hours and minutes in the display.  
^ Open the stopcock, if it is closed.  
^ Switch the dishwasher on with the  
On/Off button s.  
You can now select an additional  
function (see "Additional functions").  
The Start/Stop indicator light flashes  
and the indicator light comes on next to  
the last programme selected.  
^ Press the Start/Stop button.  
The programme cycle will begin. The  
Start/Stop and Wash/Rinse indicators  
and the indicator for the programme  
selected will light up.  
Selecting a programme  
Choose your programme according to  
the type of load and how dirty it is.  
If the "2 in 1-Tab" or "3 in 1-Tab" function  
has been selected, the corresponding  
indicator will light up as well.  
The different programmes and their  
uses are described in the programme  
chart later on in this booklet.  
A programme can only be cancelled  
in the first few minutes. Otherwise  
the programme must continue to the  
end so that important programme  
stages (e.g. reactivating the water  
softener) are not omitted.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Display  
At the end of a programme  
The duration of the programme  
selected appears in hours and minutes  
in the display before the programme  
begins. During the programme, the  
time left until the end of the programme  
is displayed.  
A programme has finished when a "0"  
appears in the display and the "End"  
programme sequence indicator lights  
up.  
The dishwasher can now be opened  
and unloaded (see "Unloading the  
dishwasher").  
The time displayed may vary with the  
same programme. This is partly  
because of the water inlet temperature  
at each intake, and partly because of  
the amount and soiling level of the  
crockery.  
,To prevent the risk of steam  
damage to the worktop edging  
above the dishwasher, it is advisable  
to leave the door closed until you are  
ready to unload the crockery.  
Alternatively you can open the door  
fully until the crockery is cool  
enough to unload. Do not leave the  
door only partially open.  
When a programme is selected for the  
first time, the display shows an average  
time for a cold water intake.  
The times shown in the programme  
chart refer to standard test loads and  
temperatures.  
Switching off  
Each time a programme is run, the  
electronic unit takes the new conditions  
into account, and calculates the time  
required.  
At the end of a programme:  
^ Switch the dishwasher off with the  
On/Off button s.  
The dishwasher will continue to use  
electricity until the On/Off button s  
is switched off.  
Programme sequence  
indicators  
After a programme has been started,  
the current stage of the programme is  
indicated by the programme sequence  
indicator lights.  
If the dishwasher is not to be used for a  
longer period of time, e. g. whilst on  
holiday, the stopcock should be turned  
off.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Unloading the dishwasher  
Interrupting a programme  
Dishes tend to break and chip more  
easily when they are hot.  
Allow the dishes to cool until they are  
comfortable enough to handle before  
unloading them.  
A programme is interrupted as soon as  
the door is opened.  
If the door is closed again, the  
programme will continue from the point  
it was at before the door was opened.  
If you open the door fully after switching  
off, the dishes will cool much faster.  
,Water in the dishwasher may be  
hot. Danger of scalding!  
^ First unload the lower basket, then  
the upper basket and cutlery tray  
(depending on model).  
This will prevent water drops from the  
upper basket and cutlery tray from  
falling onto the dishes in the lower  
basket.  
Only open the door if absolutely  
necessary and exercise extreme  
caution when doing so. Before  
closing the door again, leave it ajar  
for approx. 20 seconds. This will  
enable the temperature in the wash  
cabinet to settle. Then close the  
door firmly making sure that it clicks  
into place.  
Changing a programme  
Important:  
If the detergent dispenser flap has  
already opened, do not change the  
programme.  
If a programme has already started and  
you wish to change it, proceed as  
follows:  
^ Press the Start/Stop button for at  
least one second.  
The programme will be cancelled.  
^ Select the programme you want and  
then start it.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Additional functions  
Do not select the "3 in 1" function if:  
– using "2 in 1" tabs (detergent with  
rinse aid)  
Tab function  
– your water hardness level is above  
3.8 mmol or 21 °d.  
You can programme your dishwasher to  
ensure excellent results when using  
tablet detergents by simply selecting  
the "2 in 1" or "3 in 1" function using the  
Tab button.  
The programme sequence will be  
adjusted to the type of detergent  
selected. Depending on the  
Follow the detergent manufacturer's  
instructions.  
The washing and drying  
performance of these types of  
detergent can vary enormously.  
programme, the duration can be  
considerably longer.  
^ Switch the dishwasher on with the  
On/Off button s.  
"2 in 1":  
The Start/Stop indicator light will flash.  
When the "2 in 1" function is selected,  
the programme sequence is adjusted  
for "2 in 1" tabs (detergent containing  
rinse aid).  
The dispensing of rinse aid and the  
rinse aid refill indicator light are  
deactivated.  
^ Press the Tab button until the  
detergent type of your choice ("2 in 1"  
or "3 in 1") lights up.  
If neither of the indicators lights up, the  
dishwasher is set for normal detergent.  
The function selected is active on all  
programmes until the setting is  
changed.  
"3 in 1":  
When the "3 in 1" function is selected,  
the programme sequence is adjusted  
for "3 in 1" tabs (detergent containing  
rinse aid and salt substitutes).  
^ You can now start a programme or  
switch the dishwasher off using the  
On/Off button s.  
The dispensing of rinse aid and the  
rinse aid refill indicator light are  
deactivated.  
Salt consumption in the water softener  
is reduced to between 1/4 and 1/3 of the  
normal amount.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Delay start  
^ Switch the dishwasher on with the  
On/Off button s.  
The start time of a programme can be  
delayed, e.g. to benefit from economy  
rates of electricity. A delay start time of  
between 30 minutes and 24 hours can  
be selected.  
The Start/Stop indicator light will flash.  
^ Select the programme required using  
the programme selector button.  
^ Press the Delay start button.  
With a delay start time of between  
30 minutes and 9 hours 30 minutes, the The last Delay start time used will  
time is set in 30 minute stages. For  
10 hours or more it is set in one hour  
stages.  
appear in the display. The Delay Start  
indicator light comes on.  
^ Set the time required using the Delay  
start button.  
When using the Delay start function,  
make sure that the compartment is  
dry before adding detergent. Wipe  
dry with a cloth if necessary. If the  
compartment is wet, powder  
detergent can become lumpy and  
stick to the dispenser, with the result  
that it is not fully dispensed.  
^ Press the Start/Stop button.  
The Start/Stop indicator light will come  
on.  
Do not use liquid detergent when  
selecting Delay start, as it can run  
into the dishwasher before it is  
required.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
The time starts counting down until the  
programme start time: in 1 hour steps  
for delay start periods of over 10 hours,  
and in minutes for delay start periods of  
under 10 hours.  
Starting a programme before the  
Delay start period has elapsed  
A programme can be started before the  
Delay start period has elapsed.  
Proceed as follows:  
At the end of the delay period, the  
programme selected begins  
automatically. The time left for a  
programme to run then shows in the  
display, the Delay start indicator light  
goes out and the Start/Stop indicator  
light comes on.  
^ Press the Start/Stop button for at  
least one second.  
The Delay start indicator light will go out  
and the Start/Stop indicator light will  
flash.  
^ Press the Start/Stop button again.  
The programme cycle will begin. The  
Start/Stop indicator light will light up  
constantly.  
How the Delay start time is shown in  
the display:  
up to 59 minutes:  
e.g. 30 minutes = 30  
between 1 hour and 9 hours 30  
minutes:  
e.g. 5 hours = 5.00  
10 hours and over:  
e.g. 15 hours = 15^  
,To prevent children coming into  
contact with dishwasher detergent  
do not fill the detergent dispenser  
until just before starting the  
programme, i.e. before pressing the  
Start/Stop button, and activate the  
child safety lock.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Factory default setting  
The characters flashing in the display  
show whether a setting other than the  
factory default setting has been set.  
If you have altered any settings from  
the factory default, you can re-set them  
back to the factory default settings as  
follows:  
– "p 1": All settings are set to factory  
default settings.  
^ Switch the dishwasher off with the  
On/Off button s.  
– "p 0": At least one setting has been  
changed.  
^ Press the Start/Stop button in and  
whilst holding it in switch the  
dishwasher on using the On/Off  
button s.  
Keep the Start/Stop button pressed in  
for at least four seconds until the  
Start/Stop indicator light comes on.  
^ Press the Start/Stop button if you  
wish to re-set all the factory default  
settings.  
^ Switch the dishwasher off with the  
On/Off button s.  
If this does not happen, start the  
procedure from the beginning again.  
^ Press the Delay start button twelve  
times.  
The Delay start indicator light will give  
one long flash and two brief flashes at  
intervals and "p 0" or "p 1" will flash in  
the display.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Adjust sensor wash  
The characters flashing in the display  
show whether the "Adjust sensor wash"  
function is activated or deactivated.  
You can adjust the sensor wash  
programme so that it will remove  
stubborn soiling in a lightly soiled load.  
– "p 1": The "Adjust sensor wash"  
function is activated.  
^ Switch the dishwasher off with the  
On/Off button s.  
– "p 0": The "Adjust sensor wash"  
function is deactivated.  
^ Press the Start/Stop button in and  
whilst holding it in switch the  
dishwasher on using the On/Off  
button s.  
Keep the Start/Stop button pressed in  
for at least four seconds until the  
"Start/Stop" indicator light comes on.  
^ To change the setting, press the  
Start/Stop button.  
Switch the dishwasher off with the  
On/Off button s.  
If this does not happen, start the  
procedure from the beginning again.  
^ Press the Delay start button five  
times.  
The "Delay start" indicator will flash  
briefly five times at intervals.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the door front  
Check your dishwasher regularly  
(approx. every 4 - 6 months). This  
way faults and problems can be  
avoided.  
,Do not use any cleaning agents  
containing ammonia or thinners.  
These would damage the surface  
structure.  
Cleaning the wash cabinet  
^ Clean the front using a Miele E-cloth  
or with suitable cleaning agent for the  
type of material the front is made of.  
Follow the manufacturer's  
The wash cabinet is largely  
self-cleaning, provided that the correct  
amount of detergent is always used.  
instructions.  
If, however, there are limescale or  
grease deposits in the cabinet these  
can be removed with a proprietary  
dishwasher cleaner, such as the Miele  
dishwasher cleaner (available from the  
Miele UK Spare Parts Department).  
^ Door fronts made from wood should  
only be cleaned using a damp cloth,  
and then dried with a soft cloth.  
^ Door fronts made of stainless steel  
should be cleaned using a damp  
cloth and a little washing up liquid, or  
a proprietary non-abrasive cleaning  
agent designed specifically for use  
on stainless steel.  
Cleaning the door and the door  
seal  
^ Wipe the door seals regularly with a  
damp cloth to remove food deposits.  
^ To help prevent re-soiling, a  
proprietary conditioning agent for  
stainless steel, such as Neoblank  
(available from the Miele UK Spare  
Parts Department) can also be used.  
Follow the manufacturer's instructions  
on the label and apply sparingly with  
an even pressure following the  
direction of the grain.  
^ When the dishwasher is being  
loaded, food and drink residue may  
drip onto the sides of the dishwasher  
door.  
These surfaces are outside the wash  
cabinet and are not accessed by  
water from the spray arms. Any  
soiling should be wiped off these  
surfaces before the door is closed.  
E-Cloth  
^ A microfibre "E-Cloth" is available  
from the Miele UK Spare Parts  
Department, which is suitable for  
cleaning surfaces such as stainless  
steel, glass, plastic and chrome  
without the use of chemicals.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the control panel  
,Stainless steel and aluminium  
surfaces and controls are  
susceptible to scratching and  
abrasion, and must be treated with  
due care. They may suffer  
,Do not use abrasive cleaning  
agents, glass cleaning agents or  
all-purpose cleaners. Because of  
their chemical composition they  
could cause serious damage to  
surfaces.  
discolouration or damage if soiling is  
left on them for too long.  
Remove soiling immediately.  
Plastic panels:  
^ This type of control panel should only  
be wiped with a damp cloth or  
suitable cleaning agent designed for  
use on plastic.  
Stainless steel panels:  
^ Control panels made of stainless  
steel should be cleaned using a  
damp cloth and a little washing up  
liquid, or a proprietary non-abrasive  
cleaning agent designed specifically  
for use on stainless steel (do not use  
it on the controls).  
^ To help prevent re-soiling, a  
proprietary conditioning agent for  
stainless steel, such as Neoblank  
(available from the Miele UK Spare  
Parts Department) can also be used.  
Follow the manufacturer's instructions  
on the label and apply sparingly with  
an even pressure following the  
direction of the grain.  
Aluminium panels:  
^ Clean aluminium panels with a damp  
cloth and a little washing up liquid.  
Aluminium is affected by the way that  
light falls on it, by the surrounding  
environment and by the angle you  
observe it from.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the filters in the wash  
cabinet  
The filter combination in the base of the  
wash cabinet retains coarse soil from  
the suds solution, preventing it  
accessing the circulation system and  
re-entering the cabinet through the  
spray arms.  
,The dishwasher must not be  
used without all the filters in place.  
Collection of coarse soil may cause the  
filters to clog. The level of soiling and  
time it takes before the filters need  
cleaning will vary depending on use.  
^ Turn the handle anti-clockwise to  
release the filter combination a.  
^ Lift the filter combination out of the  
dishwasher b. Remove any coarse  
particles and rinse the filter well  
under running water. Use a nylon  
brush if necessary.  
Check the condition of the filters  
regularly and clean them if necessary.  
^ Switch the dishwasher off.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
To clean the inside of the filter, the flap  
must be opened:  
^ Replace the filter combination so that  
it lies flat in the base of the wash  
cabinet.  
^ Press together the catches in the  
direction of the arrows a as shown,  
and open the filter b.  
^ Then turn the handle clockwise to  
lock the filter combination in place.  
^ Rinse all the filters under running  
water.  
,Take care when you are fitting  
the filter combination that it is  
secured in position correctly.  
Otherwise coarse soil could get into  
the circulation system and cause a  
blockage.  
^ Then close the flap so that the catch  
engages.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the spray arms  
^ Remove the lower basket.  
Particles of food can get stuck in the  
spray arm jets and bearings. The spray  
arms should therefore be inspected  
and cleaned regularly (approx. every  
4 - 6 months).  
^ Switch the dishwasher off.  
Remove the spray arms as follows:  
^ Take out the cutlery tray (if your  
dishwasher is fitted with one).  
^ Push the top spray arm upwards to  
engage the inner ratchet. Then  
unscrew the spray arm.  
^ Pull the lower spray arm firmly  
upwards to remove it.  
^ Push the middle spray arm upwards  
a to engage the ratchet. Then  
unscrew the spray arm b.  
^ Use a pointed object to push food  
particles into the spray arm jets.  
^ Rinse thoroughly under running  
water.  
^ Replace the spray arms and check  
that they rotate freely.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
With the aid of the following guide, minor problems can be easily corrected  
without calling in a Miele service technician, saving you both time and money.  
The following guide may help you to find the reason for a fault, and to correct it.  
You should, however, note the following:  
,Repairs should only be carried out by a suitably qualified and trained  
person in accordance with current local and national safety regulations.  
Unauthorised or incorrect repairs could cause personal injury or damage the  
appliance.  
Technical problems  
Problem  
Possible cause  
Remedy  
The Start/Stop indicator The appliance is not  
does not flash after the plugged in.  
Insert the plug and switch  
on at the socket.  
dishwasher has been  
switched on using the  
On/Off button s.  
The fuse is defective or  
has tripped.  
Reset or replace the fuse.  
The dishwasher stops  
during a programme.  
The fuse is defective or  
has tripped.  
Reset or replace the fuse.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
The Wash/Rinse,  
Drying and End  
There may be a  
technical fault.  
Switch the dishwasher off  
with the On/Off button s.  
indicator lights flash  
simultaneously.  
Fault code FXX shows  
in the display.  
After a few seconds:  
Switch the dishwasher back  
on.  
Select the programme  
required with the  
programme selector button.  
Press the Start/Stop button.  
If the programme sequence  
indicator lights flash again,  
there is a technical fault.  
Call the Service  
Department.  
The drain pump works Fault F70:  
Turn off the stopcock.  
even when the door is The Waterproof System  
Call the Service  
open.  
has reacted.  
Department.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
The dishwasher does not fill/drain  
Problem  
Possible cause  
Remedy  
The Inlet/Drain  
check indicator  
flashes.  
The stopcock is  
closed.  
Open the stopcock fully.  
The dishwasher  
stops during a  
programme.  
The Inlet/Drain  
check indicator  
flashes.  
Before rectifying the problem  
you must:  
Switch the dishwasher off with  
the On/Off button s.  
Fault F12/F13:  
Water inlet restricted.  
Open the stopcock fully.  
Clean the water inlet filter (see  
Fault code FXX  
shows in the display.  
"Problem solving").  
The water pressure at the  
intake is lower than 30 kPa  
(0.3 bar).  
Seek professional advice.  
Fault F11:  
Clean the filter combination.  
Water outlet is  
See "Cleaning and Care".  
restricted, water  
remains in the wash  
cabinet at the end of a  
programme.  
Clean the drain pump. See  
"Problem solving".  
Clean the non-return valve.  
See "Problem solving".  
Remove any kink in the drain  
hose.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
General problems  
Problem  
Possible cause  
Remedy  
Detergent residue is left The dispenser was still  
Make sure the dispenser  
in the dispenser at the damp when detergent was is dry before adding  
end of a programme.  
added.  
detergent.  
The detergent lid  
cannot be closed  
properly.  
Clogged detergent  
residue is blocking the  
catch.  
Clean the detergent from  
the catch.  
At the end of a  
programme there is a  
This is caused by the  
drying system and does  
The moisture will dissipate  
after a short while.  
film of moisture on the not indicate a fault.  
inside of the door and  
the interior walls.  
Water remains in the  
wash cabinet at the end  
of a programme.  
Before rectifying the  
problem you must:  
Switch the dishwasher  
off with the On/Off  
button s.  
The filter combination in  
the wash cabinet is  
clogged.  
Clean the filter  
combination. See  
"Cleaning and Care".  
The drain pump or  
non-return valve may be  
blocked.  
Clean the drain pump or  
the non-return valve. See  
"Problem solving".  
The drain hose is kinked. Remove any kink from the  
drain hose.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Noises  
Problem  
Possible cause  
Remedy  
Knocking noise in the A spray arm is knocking  
Interrupt the programme,  
and rearrange the items  
which are obstructing the  
spray arm.  
wash cabinet.  
against an item in a  
basket.  
Rattling noise in the  
wash cabinet.  
Items of crockery are  
insecure in the wash  
cabinet.  
Interrupt the programme,  
and rearrange the items of  
crockery.  
Knocking noise in the This may be caused by  
This has no influence on  
dishwasher function. If in  
doubt, contact a suitably  
qualified plumber.  
water pipes.  
the on-site installation or  
the cross-section of the  
piping.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Unsatisfactory washing result  
Problem  
Possible cause  
Remedy  
The dishes are not The dishes were not loaded See notes in "Loading the  
clean.  
correctly.  
dishwasher"  
The programme was not  
powerful enough.  
Select a more intensive  
programme. See  
"Programme chart".  
There is some stubborn  
Use the "Adjust sensor wash"  
soiling although most of the function (see "Additional  
crockery is only lightly soiled functions").  
(e.g. with tea stains).  
Not enough detergent was  
dispensed.  
Use more detergent, or  
change your detergent.  
Items are blocking the path Rearrange the items so that  
of the spray arms.  
the spray arms can rotate  
freely.  
The filter combination in the Clean and/or fit the filter  
base of the wash cabinet is combination correctly. Clean  
not clean or is not correctly the spray arm jets. See  
fitted. This may cause the  
spray arm jets to get  
blocked.  
"Cleaning and care".  
The non-return valve is open Clean the drain pump and  
and blocked. Dirty water has the non-return valve. See  
flowed back into the wash  
cabinet.  
"Cleaning the drain pump  
and non-return valve".  
Smearing appears The rinse aid dosage is set Reduce the dosage. See  
on glassware and too high.  
cutlery, there is a  
bluish sheen on  
"Before using for the first  
time".  
the surface of  
glassware; film can  
be wiped off.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
Dishes, cutlery  
and glasses are  
not dry or are  
flecked.  
The rinse aid amount may Replenish the reservoir,  
be insufficient or the rinse increase the dosage or  
aid reservoir empty.  
change the brand of rinse aid.  
See "Before using for the first  
time".  
Crockery was taken out of Leave it in for longer. See  
the cabinet too soon.  
"Operation".  
You are using "2 in 1" or  
"3 in 1" tablets, which do  
not have a strong enough  
drying performance.  
Set the Tab function (if  
present) to "Normal", and  
replenish the rinse aid.  
The "2 in 1/3 in 1 Tab"  
function (if present) is  
Set the Tab function (if  
present) to the detergent  
switched on, even though product being used (see "Tab  
tablets are not being used. function").  
White residue is  
Not enough rinse aid was  
Increase the dosage. See  
visible on cutlery used.  
"Before using for the first time".  
and crockery,  
There is no salt in the salt  
reservoir.  
Fill the salt reservoir. See  
"Before using for the first time".  
clouding occurs  
on glassware; film  
can be wiped off.  
The salt reservoir cap has Replace it, making sure that it  
not been screwed on  
correctly.  
screws back on correctly.  
An unsuitable "2 in 1" or  
"3 in 1" tablet has been  
used.  
Change your detergent. Use a  
standard liquid, tablet or  
powder detergent, and refill  
the salt and rinse aid  
reservoirs in the dishwasher.  
The water softener is  
programmed to a setting  
which is too low.  
Select a higher water softener  
setting. See "Before using for  
the first time".  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
Glassware has a  
brown or blue tinge,  
and film cannot be  
wiped off.  
This may be caused by the Change your detergent.  
detergent.  
Glassware is dull and The glassware is not  
discoloured; film dishwasher-proof. The  
cannot be wiped off. surfaces are affected.  
There is no remedy.  
Purchase glassware which  
is dishwasher-proof.  
Tea or lipstick stains The wash temperature of  
Select a programme with a  
higher wash temperature.  
have not been  
the selected programme  
completely removed. was too low.  
The bleaching effect of the Change your detergent.  
detergent used is too low.  
Plastic items are  
discoloured.  
Natural dyes e.g. from  
carrots, tomatoes or  
Use more detergent. See  
"Operation".  
ketchup may be the cause. Discolouration is irrevers  
The amount of detergent  
used or its bleaching effect  
was not sufficient to deal  
with natural dyes.  
-ible.  
There are rust stains The affected items are not There is no remedy.  
on cutlery.  
corrosion resistant.  
Purchase cutlery which is  
dishwasher-proof.  
The "Quick wash"  
programme was not run  
after dishwasher salt was  
Always run the "Quick  
wash" programme, without  
any crockery in the  
added. Traces of salt have dishwasher, after adding  
got into the wash cycle. dishwasher salt.  
The salt reservoir cap has Replace it, making sure  
not been screwed on  
correctly.  
that it screws back on  
correctly.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving  
Cleaning the water inlet filter  
A filter is incorporated in the screw  
connection of the valve on the water  
inlet hose. The filter must be cleaned  
when dirty, otherwise insufficient water  
flows into the wash cabinet.  
,The plastic housing of the water  
connection contains an electrical  
component. It must not be dipped in  
water.  
Recommendation  
If the mains water contains a large  
number of insoluble substances, we  
recommend fitting a large-area filter in  
the connection between the stopcock  
and the water inlet hose threaded  
union. This filter is available from the  
Miele Spares Parts dept.  
^ Carefully remove the seal.  
^ Withdraw the filter using pointed  
pliers and rinse clean under running  
water.  
^ Replace the filter and seal, making  
sure they are sitting correctly.  
^ Reconnect the inlet hose to the  
stopcock, making sure it goes on  
correctly and is not cross-threaded.  
Cleaning the filter:  
^ Disconnect the dishwasher from the  
mains supply. Switch off at the mains  
socket and withdraw the plug.  
^ Turn on the stopcock gradually to test  
for leaks. If there is a leak, the inlet  
hose might not be on securely, or it  
may have been screwed on at an  
angle. Unscrew and reconnect the  
water inlet valve correctly.  
^ Turn off the stopcock.  
^ Unscrew the inlet hose.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving  
Cleaning the drain pump and  
non-return valve  
If the water has not been pumped away  
at the end of a programme the drain  
pump or the non-return valve might be  
blocked. They are, however, easy to  
clean. Watch out for glass or bone  
splinters which could cause injury.  
^ Disconnect the dishwasher from the  
mains supply. Switch off at the mains  
socket and withdraw the plug.  
^ Take the filter combination out of the  
wash cabinet (see "Cleaning and  
care", "Cleaning the filters in the wash  
cabinet").  
The drain pump is situated under the  
non-return valve (see arrow).  
^ Remove all foreign objects from the  
drain pump (watch out for glass or  
bone splinters which are particularly  
difficult to detect and could cause  
injury). Turn the drain pump impeller  
by hand to check that there are no  
more obstructions. You will feel a little  
resistance when you turn the impeller.  
^ Scoop the water out of the cabinet  
using a suitable container or utensil.  
^ Carefully replace the non-return  
valve, and secure it with the catch.  
,Ensure that the catch engages.  
^ Press the catch for the non-return  
valve inwards a.  
^ Lift out the non-return valve b and  
rinse well under running water.  
^ Remove all foreign objects from the  
non-return valve.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After sales service  
Repairs  
Future updates (PC)  
In the event of any faults that you  
cannot remedy yourself, please  
contact:  
The programme update function (PC) is  
designed to enable a service  
technician to update your appliance’s  
electronics in keeping with advances in  
technology.  
– your Miele dealer, or  
– the Miele Service Department  
The "PC" indicator light is used as the  
interface for this programming.  
(see back cover for contact details).  
^ When contacting your Dealer or the  
Miele Service Department, please  
quote the model type and number of  
your appliance, both of which are  
shown on the data plate on the right  
hand side of the door.  
For testing institutes  
The "Comparison tests" document  
gives information regarding loads and  
programmes used for comparison  
testing.  
This document can be ordered by  
e-mail from:  
Please note that telephone calls may  
be monitored and recorded for  
training purposes.  
– testinfo|miele.de  
^ Please give your postal address, as  
well as the model type and number of  
your dishwasher (see data plate).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional accessories  
To make the most of your dishwasher  
Optional accessories for particular purposes are available from your Miele dealer  
or from the Spare Parts Department (some may be supplied as standard  
depending on model).  
If you would like to …  
you will need to order …  
… wash long-stemmed glassware  
… a glassware insert for the upper  
basket  
... wash a Miele Cappuccinatore  
… a Cappuccinatore insert for the  
upper basket  
... wash bottles,  
… a bottle holder  
e. g. milk or baby bottles  
… wash additional items of cutlery  
... wash a lot of glasses  
… a small cutlery basket for the lower  
basket  
… a glassware insert for the bottom  
basket  
... wash large plates  
... an insert for plates up to:  
- 33 cm diameter  
- 35 cm diameter  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Programme  
When to use  
Sensor wash  
Sensor controlled programme  
for normally soiled crockery  
Quick wash 40 °C "Quick programme" for lightly soiled crockery, e.g. party crockery;  
for flushing out salt residues after replenishing the salt reservoir;  
3)  
includes sensor controlled glass care;  
not suitable for tablet detergents.  
3)  
Sensor wash  
Sensor controlled gentle programme  
gentle :  
for lightly soiled and temperature sensitive crockery and glassware;  
reduce detergent by 50%  
1)  
Energy save  
for normal everyday loads,  
energy saving programme which uses a low temperature and long programme  
duration;  
3)  
includes sensor controlled glass care  
Pots & pans 75 °C for normally soiled pots, pans, dishes etc with dried on soiling;  
for very heavy soiling, add 20% more detergent than recommended  
Pre-wash  
for rinsing crockery to avoid smells, if a complete cycle is not yet needed  
1) Standard programme for energy labelling.  
2) See "Operation, Display".  
3) Depending on model.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Programme sequence  
Consumption  
Duration  
2)  
Energy kWh  
Water  
h:min  
Pre-  
wash  
Main  
wash  
Interim  
rinse  
Final Drying  
rinse  
Cold  
water  
connec-  
tion  
Hot water Litres  
connec-  
tion  
Cold  
Hot water  
connec-  
tion  
water  
connec-  
tion  
1
2
1
2
(55 °C)  
(55 °C)  
(15 °C)  
(15 °C)  
if  
X
if  
X
65 °  
X
1.0-1.5  
0.75  
0.65-0.8 13-22 1:39-2:34 1:24-2:08  
0.22 13 0:33 0:22  
required 45 °- 65 ° required  
X
X
X
40 °  
50 °  
if  
X
if  
X
55 °  
X
X
0.85-1.0  
1.05  
0.4-0.5 13-22 1:25-1:55 1:14-1:36  
required 37 °- 48 ° required  
X
X
X
0.7  
13  
2:56  
2:44  
45 °  
60 °  
X
X
X
75 °  
X
X
65 °  
X
1.6  
1.0  
17  
5
2:46  
0:12  
2:30  
0:12  
0.02  
0.02  
On G 2XXX models (see data plate), the max. energy consumption is 0.1 kWh and the water  
consumption is up to 1 litre higher, except on the Pre-wash programme.  
The durations given can vary depending on individual circumstances.  
Values quoted are in accordance with EN 50242. Results may differ, depending on individual  
conditions and the level of soiling.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
Electrical connection U.K.  
Non-rewireable plugs BS 1363  
The fuse cover must be refitted when  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
,All electrical work must be  
carried out by a suitably qualified  
and competent person, in  
accordance with current local and  
national safety regulations (BS 7671  
in the UK).  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
Ensure power is not supplied to the  
appliance until after installation work  
has been carried out.  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
The appliance is supplied with a mains  
cable with moulded plug ready for  
connection to a 230-240V mains  
supply. Please ensure the connection  
data quoted on the data plate match  
the household mains supply.  
Connection should be made via a  
suitable switched socket which is easily  
accessible after installation.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
For extra safety it is advisable to install  
a residual current device (RCD), with a  
trip current of 30 mA (in accordance  
with DIN VDE 0664, VDE 0100 Section  
739).  
Do not connect via an extension lead.  
Extension leads do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Connection to the water supply  
,Water in the dishwasher must  
not be used as drinking water.  
– The dishwasher may be connected  
to a cold or hot water supply, max.  
60 °C. We would only recommend  
connection to a hot water supply if it  
is economical, e.g. a solar powered  
supply. When connected to a hot  
water supply all programme stages  
which would otherwise be carried out  
with cold water will be carried out  
with hot water.  
!The inlet hose must not be  
– The inlet hose is approx. 1.5 m long.  
A 1.5 metre long flexible metal  
shortened or damaged in any way  
as it contains electrical components  
(see illustration).  
extension hose, pressure tested to  
14000 kPa/ 140 bar, is available as  
an optional accessory if required.  
– A stopcock with a 3/4 " male thread  
must be provided on site.  
– This appliance is constructed to  
comply with IEC/EN/DIN 61770 //  
VDE 0700 Section 600, and may be  
connected to a suitable supply  
without an extra non-return valve if  
national regulations permit.  
– The water pressure (flow pressure at  
the take-off point) must be between  
30 and 1000 kPa (0.3 and 10 bar).  
If the water pressure is too high, a  
pressure reducing valve must be  
fitted.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plumbing  
Drainage  
Venting the drainage system  
– The appliance drainage system is  
fitted with a non-return valve, which  
prevents dirty water from flowing  
back into the dishwasher via the  
drain hose.  
If the on-site drain connection is  
situated lower than the guide path for  
the bottom basket rollers in the open  
door the drainage system must be  
vented. Otherwise a siphoning effect  
during a programme can cause the  
appliance to empty itself of water.  
– The dishwasher is supplied with  
approx. 1.5 m of flexible drain hose  
with an internal diameter of 22 mm.  
To vent it:  
– The drain hose can be extended  
using a connection piece to attach a  
further length of hose.  
^ Open the dishwasher door fully.  
^ Pull the lower spray arm firmly  
upwards to remove it.  
The drainage length must not be  
longer than 4 m, and the delivery  
head must not exceed 1 m.  
– If the hose is to be directly fitted to  
the drainage outlet on site, use the  
hose clip supplied.  
– The hose can be directed to the left  
or the right of the appliance.  
– The on-site connector for the drain  
hose can be adapted to different  
widths of hose. If the connector  
protrudes too far into the drain hose,  
it will need to be shortened.  
Otherwise the drain hose may  
become blocked.  
^ Cut off the top of the vent valve in the  
wash cabinet.  
– The drain hose must not be  
shortened.  
– Make sure that there are no kinks in  
the hose, and that it is not squashed  
or stretched.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Dishwasher model  
G 1XXX  
G 2XXX  
Height freestanding  
84.5 cm  
-
(adjustable +3.5 cm)  
Height built-in  
80.5 cm  
84.5 cm  
(adjustable + 6.5 cm)  
(adjustable + 6.5 cm)  
Height of building-in  
recess  
min. 80.5 cm (+ 6.5 cm)  
min. 84.5 cm (+ 6.5 cm)  
Width  
59.8 cm  
60 cm  
59.8 cm  
60 cm  
Width of building-in  
recess  
Depth:  
Freestanding  
Built-in  
60 cm  
57 cm  
-
57 cm  
Weight:  
Freestanding  
Built-under  
Integrated  
approx. 61.0 kg  
approx. 55.0 kg  
approx. 53.0 kg  
-
approx. 57.0 kg  
approx. 55.0 kg  
Voltage  
See data plate on right hand side of door.  
See plug.  
Connected load  
Fuse rating  
Test certificates awarded KEMA, VDE, radio and  
television suppressed  
KEMA, VDE, radio and  
television suppressed  
Water pressure (flow rate) 30 - 1000 kPa  
(0.3 - 10 bar)  
30 - 1000 kPa  
(0.3 - 10 bar)  
Hot water connection  
Delivery head  
Drainage length  
Mains cable  
up to max. 60 °C  
max. 1 m  
up to max. 60 °C  
max. 1 m  
max. 4 m  
max. 4 m  
approx. 1.7 m  
12 place settings  
approx. 1.7 m  
14 place settings  
Capacity  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved /  
G1220/G1230/G1290/G1291/G2220/G2230/G2290/2291 / 1106  
M.-Nr. 06 702 810 / 02  
en - GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  

MTD Trimmer 316745400 User Manual
Multiquip Welder MT85HS User Manual
Nady Systems Microphone SCM 2090 User Manual
National Instruments Graphics Tablet NI PXI 5621 User Manual
NEC Microwave Oven N924P User Manual
Nokia Bluetooth Headset BH 504 User Manual
NorthStar Navigation Saw 701EU User Manual
Oki Printer 8810n User Manual
Olympus Camcorder E 620 User Manual
Panasonic Laptop C3303N User Manual