Miele Clothes Dryer T 4839 Ci User Manual

Operating instructions  
for condenser tumble dryer  
T 4839 Ci  
en - GB  
To avoid the risk of accidents  
or damage to the appliance  
it is essential to read these  
instructions before it is installed  
and used for the first time.  
M.-Nr. 06 731 781  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2  
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Operating the tumble dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10  
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13  
Notes on laundry care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Care symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
Tips on drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14  
How to dry correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15  
Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Low temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
Once a programme has started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
- changing the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
- cancelling the programme and then selecting a different programme . . . . . 25  
- cancelling the programme and then removing the laundry . . . . . . . . . . . . . . 25  
Adding or removing laundry after a programme has started. . . . . . . . . . . . . . . . . 25  
Time remaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Emptying the condensed water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
Cleaning the fluff filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning them whilst dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Cleaning them with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28  
Cleaning the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
Cleaning the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Removing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Checking the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Cleaning the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31  
Replacing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Changing the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38  
After Sales service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Future updates (PC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39  
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40  
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41  
Building under a continous worktop / in a kitchen run . . . . . . . . . . . . . . . . . . . 41  
Aligning the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Room in which the dryer is located. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Washer-dryer stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Before moving the tumble dryer again (e.g. when moving house). . . . . . . . . . 42  
Matching the fascia panel to the height of adjacent drawer fronts . . . . . . . . . . . . 43  
Removing the spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Fitting the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Front panel dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
Fitting the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Fitting a door front panel made by another manufacturer . . . . . . . . . . . . . . . . . . . 45  
Preparing the front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Preparing the fixing points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Fitting a plinth facing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
External condensed water outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
Arranging the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
External drainage via a sink or gully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Installation conditions requiring a non-return valve . . . . . . . . . . . . . . . . . . . . . 49  
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53  
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
To open the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
To close the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55  
Time (of day) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Extended cool down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56  
Airways indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57  
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Keypad tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct application  
This tumble dryer is only intended  
~
for drying fabrics which have been  
washed in a water solution, and marked  
on the manufacturer's care label as  
being suitable for tumble drying.  
"Dry cleaning kits" for freshening up  
garments in a tumble dryer are  
increasingly available on the market. If  
using, do so at your own risk, and follow  
the instructions provided on the  
packaging.  
It is essential to read these  
~
instructions.  
This tumble dryer conforms to  
current safety requirements.  
Inappropriate use can, however, lead  
to personal injury and damage to  
property.  
Any other applications may be  
dangerous. Miele cannot be held liable  
for damage resulting from incorrect or  
improper use or operation.  
To avoid the risk of accidents and  
damage to the tumble dryer, please  
read these instructions carefully  
before using it for the first time. They  
contain important information on its  
safety, installation, use and  
This appliance is not intended for  
~
use by persons (including children) with  
reduced physical, sensory or mental  
capabilities, or lack of experience or  
knowledge, unless they are supervised  
whilst using it or have been shown how  
to use it by a person responsible for  
their safety.  
maintenance.  
Keep these instructions in a safe  
place and ensure that new users are  
familiar with the content. Pass them  
on to any future owner.  
Safety with children  
Keep children away from the tumble  
~
dryer at all times. It is not a toy! To avoid  
the risk of injury do not allow them to  
play on or near it or to play with its  
controls. Supervise children whilst you  
are using it.  
Older children may only use it if its  
~
operation has been clearly explained to  
them, and they are able to use it safely,  
recognising the dangers of incorrect  
use.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Technical safety  
Faulty components must only be  
~
replaced by genuine Miele original  
Before setting up the tumble dryer,  
~
spare parts. Only when these parts are  
fitted can the safety standards of the  
tumble dryer be guaranteed.  
check it for any externally visible  
damage.  
Do not install or use a damaged tumble  
dryer.  
If the connection cable is faulty it  
~
must only be replaced by a Miele  
approved service technician to protect  
the user from danger.  
Before connecting the tumble dryer,  
~
ensure that the connection data on the  
data plate (voltage and connected  
load) match the mains electricity  
supply. If in any doubt, consult a  
qualified electrician.  
In the event of a fault or for cleaning  
~
purposes, the tumble dryer is only  
completely isolated from the electricity  
supply when:  
The electrical safety of this tumble  
~
dryer can only be guaranteed when  
continuity is complete between it and  
an effective earthing system which  
complies with current local and national  
safety regulations. It is most important  
that this basic safety requirement is  
present and regularly tested, and where  
there is any doubt the household wiring  
system should be inspected by a  
qualified electrician. Miele cannot be  
held liable for the consequences of an  
inadequate earthing system (e.g.  
electric shock).  
– it is switched off at the wall socket  
and the plug is withdrawn, or  
– it is switched off at the mains, or  
– the mains fuse is disconnected, or  
the screw-out fuse is removed (in  
countries where this is applicable).  
This tumble dryer may only be used  
~
in mobile installations such as ships if a  
risk assessment of the installation has  
been carried out by a suitably qualified  
engineer.  
In countries where there are areas  
~
Do not connect the tumble dryer to  
~
which may be subject to infestation by  
cockroaches or other vermin, pay  
particular attention to keeping the  
tumble dryer and its surroundings in a  
clean condition at all times. Any  
damage which may be caused by  
cockroaches or other vermin will not be  
covered by the guarantee.  
the mains electricity supply by an  
extension lead. Extension leads do not  
guarantee the required safety of the  
tumble dryer (e.g. danger of  
overheating).  
Unauthorised repairs could result in  
~
unforeseen dangers for the user, for  
which Miele cannot accept liability.  
Repairs should only be undertaken by a  
Miele approved service technician.  
Ensure current is not supplied to the  
tumble dryer until after maintenance or  
repair work has been carried out.  
Do not make any alterations to the  
~
tumble dryer, unless authorised to do  
so by Miele.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
Correct use  
To prevent the risk of fire, the  
~
following must not be dried in this  
To prevent the risk of fire, the  
~
tumble dryer:  
following textiles must not be dried in  
this tumble dryer:  
– fabrics which contain a large  
proportion of rubber, foam rubber or  
rubber-like materials. For example,  
products made from latex foam  
rubber, shower caps, waterproof  
textiles, rubberised articles and items  
of clothing and pillows with foam  
rubber filling.  
– items which have not been washed.  
– items, such as workwear, which have  
not been thoroughly cleaned and  
which are still soiled with grease, oil  
or other desposits (such as  
cosmetics, lotions etc).  
If items have not been thoroughly  
cleaned there is a danger that these  
might ignite when heated, even after  
they have been removed from the  
dryer at the end of the programme.  
– items which contain padding or  
fillings (e.g. pillows, jackets). If these  
were damaged the filling could get  
out with the risk of igniting in the  
dryer.  
– items which have been treated with  
inflamable cleaning agents or  
contain residues of acetone, alcohol,  
benzine, petrol, stain remover,  
turpentine, wax, wax remover or other  
chemicals (e.g. mops and floor  
cloths).  
In many programmes, the heating  
~
phase is followed by a cooling down  
phase to ensure that the items are not  
too hot to handle when you remove  
them (this also avoids the danger of the  
laundry self-igniting). The programme is  
not finished until the cooling down  
– items which have been splashed with phase is complete.  
hair lacquer, hair spray, nail varnish  
remover or similar substances.  
Ensure that you always wait until the  
end of the programme before removing  
the laundry.  
When washing such heavily soiled  
items ensure that you use sufficient  
detergent and select a high  
temperature. If in doubt, wash the  
items several times.  
Warning: Do not switch the tumble  
~
dryer off before the end of the drying  
programme. If this was done and the  
laundry was then removed immediately,  
it could give off a great amount of heat.  
Fabric conditioner and similar  
~
products must be used according to  
the instructions on the manufacturer's  
packaging.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning and Safety instructions  
The dryer must not be used without  
Always keep the area around the  
~
~
the fluff filters in place or if the fluff filters tumble dryer free of dust and fluff. Dust  
are damaged in any way.  
drawn into the tumble dryer can cause  
blockages in the condenser unit over  
time.  
The fluff filters must be cleaned  
~
regularly.  
Do not let anyone sit or lean on the  
~
The dryer must not be used without  
~
door, as this can cause the tumble  
dryer to tip up.  
the condenser unit in place.  
The fluff filters must be thoroughly  
~
Always close the door after use. This  
~
dried after cleaning. Damp or wet filters  
could cause operational faults.  
way you will avoid the danger of:  
– children climbing onto or into the  
dryer or hiding things in it.  
Do not install the tumble dryer in a  
~
room where there is a risk of frost  
occurring. At temperatures around  
freezing point the tumble dryer may not  
be able to operate properly.  
– pets or other small animals climbing  
into it.  
The tumble dryer must not be hosed  
~
There is a risk of damage if the  
condensed water is allowed to freeze in  
the pump, hoses and / or condensed  
water container.  
down.  
Accessories  
The ambient room temperature should  
be between +2°C and +35°C.  
Only use genuine Miele spare parts  
~
and accessories with this appliance.  
If non-Miele parts are used, guarantee,  
performance and product liability  
claims may be invalidated.  
If the water is drained externally  
~
through the drain hose instead of being  
collected in the condensed water  
container, make sure the drain hose is  
securely attached if you hang it in a sink  
or basin to avoid the hose slipping and  
the water causing damage.  
Miele cannot be held liable for  
damage caused by non-compliance  
with these Warning and Safety  
instructions.  
Condensed water is not drinking  
~
water.  
It can cause health problems in both  
people and animals.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the tumble dryer  
Control panel  
aProgramme buttons  
fStart/Stop button  
For selecting a drying programme.  
bExtra option buttons  
For starting the programme selected  
and cancelling a programme once it  
has started.  
Various extra options can be added  
to the drying programmes.  
The indicator light flashes while a  
programme is being selected and  
then is on constantly when the  
programme has started.  
cPC / Optical interface  
This is used by service technicians to  
run diagnostic checks on your  
machine and can also be used to  
update programming data in the  
future.  
gI-On/0-Off button  
To switch the machine on or off or to  
interrupt a programme.  
hDoor button  
dm button  
Pressing this button will open the  
door even when the machine is  
switched off at the mains.  
For selecting delay start and calling  
up the time of day in the display.  
eDisplay with Menu buttons  
See the next page for more  
information.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the tumble dryer  
Display  
Selecting programmes via the  
display  
The display is used for the following:  
By pressing the Further programmes  
button, you can select one of the  
following programmes:  
Selecting and displaying settings  
– Selecting different drying levels (e.g.  
Hand iron, Normal ...)  
– Denim  
or the duration of the Warm air and  
Cool air programmes  
– Cool air  
– Warm air  
– Selecting delay start  
– Standard Pillows  
– Large Pillows  
– Silks handcare  
– Sportswear  
– Displaying the drying duration  
(Estimated time remaining)  
Note  
All the display illustrations and times  
given in these instructions are  
examples, and can vary.  
– Outerwear  
– Proofing  
– Cottons hygiene  
– Minimum iron hygiene  
– Timed drying hygiene  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating the tumble dryer  
Menu buttons  
Programme duration / Estimated time  
remaining  
When a programme is selected, the  
estimated duration (time remaining) will  
appear in the display. Please be aware  
that it is only an estimate!  
The following factors all affect the  
estimated time remaining: residual  
moisture content after spinning; type of  
fabric; size of load; room temperature;  
fluctuations in power supply.  
The electronics continually assess  
conditions in the machine and adjust  
the estimated time remaining for a more  
accurate reading. Because of this, the  
time displayed can alter during the  
course of a programme.  
Various settings are made via the Menu  
buttons.  
They are used to alter or confirm the  
value displayed above the vertical line.  
In the same way, the Woollens  
handcare, Silks handcare and  
Smoothing programmes can finish  
earlier than expected if a certain  
temperature is reached. This can  
happen with particularly fine fabrics,  
very small loads or if items were partly  
dry beforehand.  
To alter a setting:  
Cottons  
Duration:  
1:52 h  
Extra dry  
Pressing the right or left hand Menu  
button selects the drying level.  
To confirm a setting:  
Further programmes  
Denim  
Continue  
OK  
Pressing the left hand Menu button  
under Continue calls up further  
programmes, and you can then confirm  
your selection of the highlighted  
programme by pressing the right hand  
Menu button under OK.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before using for the first time  
When the tumble dryer is switched on  
for the first time, the welcome screen  
will appear.  
The display for setting the time will then  
appear.  
Setting the time (of day)  
The welcome screen will appear in the  
display every time you switch the  
machine on until you have run a  
12:00  
programme lasting longer than 1 hour.  
Change  
OK  
The display for setting the language will  
then appear.  
^ Select the hours you want by  
pressing the left hand Menu button  
under Change, and confirm this with  
the right hand Menu button under  
OK.  
Setting the language  
You need to select the language you  
require for the display.  
^ Then set and confirm the minutes.  
The entry menu will appear.  
Entry menu  
You can select a different language  
from the one shown.  
It is possible to change the language at  
any time via the Settings menu.  
The entry menu showing the current  
time of day will appear after the  
machine has been switched on, until  
you select a programme.  
Language  
english  
)
OK  
10 : 00  
^ Select the language you require by  
pressing the left hand Menu button  
under ~.  
Select programme  
^ You can now load the laundry into the  
dryer and select a programme as  
described in "How to dry correctly".  
^ Confirm your selection by pressing  
the right hand Menu button under  
OK.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on laundry care  
Care symbols  
– Down-filled garments have linings  
which have a tendency to shrink,  
depending on the quality of the item.  
They can be partially dried using the  
Smoothing programme.  
Before drying check the drying symbol  
on the care label. If there are no  
symbols, dry at your own risk!  
q . . . . . . . . . Dry at normal temperature  
r. . . . . . . . . . . . Dry at low temperature  
s . . . . . . . . . . . . . . . Do not tumble dry  
– Pure linen should only be machine  
dried if specified as suitable by the  
manufacturer on the care label, as  
the surface of the fabric may  
Tips on drying  
otherwise become rough. They can  
be partially dried using the  
– Always observe the maximum  
recommended loads given in the  
"Programme chart". Never overload  
the drum.  
Smoothing programme.  
– Loopknit garments (e.g. T-shirts and  
underwear) tend to shrink depending  
on their quality. Do not over-dry these  
textiles. Be particularly careful when  
using the Hygiene programmes.  
When purchasing these garments it  
is advisable to take their shrinkage  
properties into account.  
Overloading can cause unnecessary  
wear and tear to the laundry, give a  
disappointing drying result and  
cause more creasing.  
– Do not put soaking wet items into the  
tumble dryer. Spin them thoroughly  
after washing using the appropriate  
spin speed.  
– For garments made from very fine  
weave fibres, such as shirts or  
blouses, use the Shirts programme to  
avoid creasing. If in doubt, reduce  
the load or use the Smoothing  
programme.  
– For delicates and fabrics with the  
following care label r select Low  
temperature.  
– Starched laundry can be dried in the  
tumble dryer. To achieve the usual  
finish, double the amount of starch  
should be used.  
– Use the Automatic programme for  
drying mixed loads of cottons and  
minimum iron fabrics.  
– Open jackets so that they can dry  
evenly.  
– New dark coloured garments should  
be washed and dried separately from  
light coloured garments to avoid the  
danger of colours running and  
discolouring other garments or even  
plastic components in the machine.  
Dark coloured fibres can also settle  
on light coloured garments and vice  
versa.  
– Woollens and wool blends tend to  
become matted and shrink if dried in  
a tumble dryer. They can, however,  
be partially dried using the Woollens  
handcare programme.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to dry correctly  
Brief instructions  
C Load the tumble dryer  
The headings numbered (A, B, C ...)  
show the operating sequence and can  
be used as a brief guide to using your  
dryer.  
^ Press the Door button to open the  
door.  
^ Load the laundry loosely into the  
drum.  
A Sort the laundry  
Do not overload the drum. See the  
"Programme chart" for recommended  
loads for each programme.  
To ensure an even drying result  
separate out the washed laundry and  
sort it according to:  
Overloading can cause unnecessary  
wear and tear to the laundry and  
give a disappointing drying result.  
. . . the drying level required  
. . . the type of fibre or weave  
. . . size  
. . . the moisture content after spinning.  
^ Before closing the door make sure  
the fluff filter is correctly positioned.  
,Make sure that objects e.g.  
detergent dispensing balls have  
been removed from the laundry.  
They could melt, and cause damage  
to the dryer or the laundry.  
– Check seams and stitching to ensure  
that padding and linings are intact.  
– Fasten duvet covers and pillow cases  
to prevent small items from being  
trapped inside them.  
– Fasten hooks and eyes etc.  
– Tie fabric belts and apron strings.  
– Sew in or remove underwiring from  
bras.  
Check the laundry is right inside the  
drum so that it cannot get trapped or  
damaged when the door is shut.  
B Turn on the tumble dryer  
^ Switch the dryer on by pressing the  
I-On/0-Off button in.  
^ Shut the door either with a gentle  
swing, or lean against it and push it  
shut.  
The tumble dryer may be switched on  
after loading, saving energy as the light  
will not come on.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to dry correctly  
D Select a programme  
You cannot alter the drying level of the  
Woollens handcare and Smoothing  
programmes.  
Further programmes  
Further programmes  
Denim  
Continue  
OK  
^ Press the left hand Menu button  
under Continue repeatedly until the  
programme you want appears.  
^ Confirm your selection of the  
programme by pressing the right  
hand Menu button under OK.  
^ Press the button for the programme  
you wish to select.  
The indicator light for the programme  
selected will light up and the  
programme name will appear in the  
display.  
You can select the drying level for the  
Denim, Sportswear and Outerwear  
programmes, as described in "Select  
a drying level".  
Programmes with drying levels:  
Cottons, Minimum iron, Delicates,  
Automatic, Shirts, Denim,  
You cannot alter the drying level of  
the Pillows, Silks handcare, Proofing,  
Cottons hygiene and Minimum iron  
hygiene programmes.  
Sportswear and Outerwear  
Cottons  
You can select a programme duration  
of . . .  
Duration:  
1:52 h  
. . . 15 minutes to 2 hours for the  
Warm / Cool air timed drying  
programmes  
^ ^ ^ ^ ^ ^  
Extra dry  
^ Press the left or right hand Menu  
button reapeatedly until the drying  
level you want appears in the display.  
. . . 1 to 2 hours for the Timed drying  
hygiene programmes  
Warm air  
– Any of the drying levels can be  
selected for the Cottons programme.  
A more limited range is available  
when using other programmes.  
Duration: 0:15 h  
Decrease  
Increase  
Important: Please note that the  
^ Press the Menu buttons under  
Increase or Decrease to lengthen or  
shorten the duration of the timed  
drying programmes.  
programme duration shown in the  
display will vary according to the  
programme selected (see "Programme  
duration / Estimated time remaining").  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to dry correctly  
E Select any Extra options / Delay  
start  
Before the end of a programme  
There is a cooling down phase at the  
end of the drying sequence: Cooling  
down will appear in the display. The  
programme will not finish until the  
cooling down phase has been  
completed.  
There is no cooling down phase at the  
end of the Woollens handcare, Silks  
handcare and Smoothing programmes.  
G Remove the laundry when the  
programme has finished  
Anti-crease (if selected) and Finished  
will appear in the display to indicate  
that the programme has finished. The  
buzzer (if selected) will sound at  
intervals.  
^ Select any extra options or delay start  
by pressing the appropriate button  
(see "Extra options" and "Delay start"  
for more details).  
^ Press the Door button to open the  
drum door.  
F Start the programme  
The indicator light for the Start/Stop  
button will flash when a programme is  
being selected. The flashing indicates  
that a programme can be started.  
^ Remove the laundry.  
Check that all items have been  
removed from the drum. If items are  
left in the dryer, they could be  
damaged by overdrying when the  
dryer is next used.  
^ Press the Start/Stop button.  
The indicator light for the Start/Stop  
button will now light up constantly.  
Drying will appear in the display and  
the time remaining will start counting  
down.  
If the dryer is switched on at the mains  
and the door is opened, the drum  
lighting will come on. It will go out a few  
minutes later to save energy.  
With programmes with drying levels,  
e.g. Machine iron, Hand iron etc. the  
drying level reached will be shown in  
the display later on.  
^ Switch the dryer off by pressing the  
l-On/0-Off button.  
^ Clean the fluff filters.  
^ Close the door.  
^ Empty the condensed water  
container (unless the dryer has been  
connected for external drainage).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Extra options  
– Fabrics are dried more quickly.  
Anti-crease  
Helps prevent creasing, if laundry is  
not normally removed immediately  
after the end of a programme.  
– The drum will turn at intervals for an  
hour after the programme has  
finished.  
Buzzer  
– It is not possible to select the Short  
and Low temperature options at the  
same time.  
A buzzer sounds (at intervals for a  
maximum of 1 hr) to let you know the  
programme has finished.  
– Not all the extra options are suitable  
for use with every programme.  
– The buzzer can be selected for all  
the programmes and at any time.  
Low temperature  
You can change the volume of the  
buzzer. See "Settings menu J".  
For drying delicates and fabrics with  
the r symbol on the care label at a  
lower temperature.  
– The buzzer will always sound when  
there is a fault, even if it has been  
switched off.  
– For all delicate or minimum iron  
fabrics with the r symbol on the  
care label (e.g. acrylic garments).  
– The programme duration is longer.  
– On some programmes Low  
temperature is a standard part of the  
programme and so cannot be  
deselected.  
Short  
For drying fabrics which can  
withstand higher temperatures and  
have q on the care label. Do not use  
on minimum iron or delicate fabrics.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Delay start  
With delay start you can choose when  
you want the programme to end. The  
start of a programme can be delayed  
from 30 minutes up to a maximum of 24  
hours, allowing you to make use of  
night-time economy electricity rates, for  
example.  
Cottons  
Start in:  
1:01 h  
Normal  
The delay start time will now count  
down in minutes until the start of the  
programme.  
To select delay start  
ASelect the programme you want and  
then press the m button.  
The drum will turn briefly every hour to  
help prevent creasing.  
The indicator light for the m button will  
light up.  
To add laundry after the delay start  
time has started counting down  
^ Open the door and add the laundry.  
Delay start  
From: 10:00  
Change  
10:00  
to: 11:29  
Back A  
^ Close the door and press the  
Start/Stop button.  
The delay start time will continue to  
count down.  
The display shows the start time (From),  
the time for the end of the programme  
(to) and the current time of day.  
To alter delay start  
^ It is possible to change the drying  
level after the delay start time has  
begun to count down by pressing  
one of the Menu buttons.  
Delay start  
From: 11:01  
Change  
10:00  
to: 12:30  
OK  
You can also select a later programme  
end time once the delay start time has  
begun to count down if you wish:  
BUse the left hand Menu button under  
Change to select the time you want  
the programme to end at.  
^ Press the m button.  
^ Use the left hand Menu button under  
Change to alter the time you want the  
programme to end at.  
The first press on the button will adjust  
the programme end time to the next half  
or full hour. Each subsequent press on  
the button will delay the programme  
end time by 30 minutes.  
^ Confirm by pressing the right hand  
Menu button under OK.  
To cancel delay start  
CConfirm the time you require by  
pressing the right hand Menu button  
under OK.  
^ Press the m button.  
^ Confirm by pressing the right hand  
Menu button under Delete.  
To begin delay start  
^ To start the programme: Press the  
Start/Stop button.  
DPress the Start/Stop button.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Cottons  
Max. load: 6 kg*  
Extra dry, Normal+, Normal**  
Fabric type  
Single and multi-layered cotton fabrics such as towelling,  
jerseywear, T-shirts, underwear.  
Note  
– Select Extra dry for multi-layered and very thick fabrics.  
– Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear),  
as they have a tendency to shrink.  
Extra options Low temperature (select this option for delicate fabrics with the r  
symbol on the care label), Short, Anti-crease  
Hand iron r, Hand iron rr**, Machine iron  
Fabric type  
Cottons or linen fabrics, e.g.: table linen, bed linen, starched  
laundry.  
Note  
To prevent laundry from drying out, it should be rolled up until you  
are ready for ironing.  
Extra options Low temperature (select this option for delicate fabrics with the r  
symbol on the care label), Short, Anti-crease  
Minimum iron  
Max. load: 3 kg*  
Normal+, Normal**, Hand iron r  
Fabric type  
Minimum iron items made of cotton, synthetic or blended fabrics,  
e.g.: shirts, blouses, skirts and table cloths.  
Extra options Low temperature (select this option for delicate fabrics with the r  
symbol on the care label), Short, Anti-crease  
* Weight of dry laundry  
** Note for test institutes:  
Use this programme without selecting any Extra options for testing according to  
EN 61121 standard.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Delicates  
Max. load: 2 kg*  
Normal+, Normal, Hand iron r, Hand iron rr, Machine iron  
Fabric type Delicate items made of cotton, synthetic or blended fabrics, e.g.:  
jumpers, skirts, trousers, table cloths, shirts, blouses and evening  
wear with sequins and beading.  
Note  
Extra options Low temperature. (Low temperature cannot be deselected),  
Anti-crease  
Laundry remains relatively crease-free for easier ironing.  
Woollens handcare  
Max. load: 2 kg*  
Fabric type Woollen fabrics  
Note  
– This programme only fluffs up woollen garments. They are not  
dried completely by this programme.  
– Remove garments as soon as the programme has finished and  
leave to finish drying at room temperature.  
Extra option Low temperature. (Low temperature cannot be deselected).  
Automatic  
Max. load: 3.5 kg*  
Normal+, Normal, Hand iron r  
Fabric type Mixed loads of garments suitable for the Cottons and Minimum  
iron programmes. Sort according to colour.  
Extra option Anti-crease  
Shirts  
Max. load: 2 kg*  
Normal, Hand iron r  
Garment  
Shirts and blouses.  
Extra options Low temperature. (Low temperature cannot be deselected),  
Anti-crease  
Smoothing  
Max. load: 3 kg*  
Fabric type – Cotton and linen fabrics.  
– Minimum iron items made of mixed fibres, cottons or synthetics,  
e.g.: trousers, jackets, shirts.  
Notes  
– Smooths out creasing caused during the spin cycle in the  
washing machine.  
– Fabrics are not completely dried in this programme. Remove  
garments as soon as the programme has finished and leave to  
finish drying at room temperature.  
Extra options Low temperature. (Low temperature cannot be deselected),  
Anti-crease  
Weight of dry laundry  
*
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Denim  
Max. load: 3 kg*  
Normal, Hand iron r  
Fabric type Denim garments, e.g. jeans, jackets, skirts, shirts.  
Extra  
Low temperature. (Low temperature cannot be deselected),  
Anti-crease  
options  
Cool air  
Max. load: 6 kg*  
Fabric type Any item which only needs airing.  
Extra option Anti-crease  
Warm air  
Max. load: 6 kg*  
Fabric type – "Voluminous" and multi-layered fabrics whose layers have  
different drying characteristics, e.g. jackets.  
– For drying individual items, e.g. bath towels, bathing costumes,  
tea-towels and small loads.  
Note  
Tip  
– Do not select the longest drying time to start with. Check the  
items as you are drying them to find the optimum time.  
You can use the Warm air programme to help remove odours from  
cotton clothing which has been worn but it still clean (select a  
duration of between 1/2 and 1 hour). Items must be suitable for  
drying in a tumble dryer. Dampen the garments a little beforehand  
or add a fabric conditioner sheet. The Warm air programme will not  
be as effective at removing odours from any parts of the garments  
which are made of synthetic fibres.  
Extra  
Low temperature (select this option for delicate fabrics with the r  
options  
symbol on the care label), Anti-crease.  
Standard pillows - Normal (drying level)  
Large pillows - Normal (drying level)  
1-2 pillows up to  
40 x 40 cm  
1 pillow up to 80  
x 80 cm  
Item  
Note  
Pillows suitable for drying in a tumble dryer, with feather, down or  
synthetic fillings.  
Please observe the instructions on the care label. Pillows can still  
feel damp after being dried. You can use this programme several  
times until the pillow feels dry.  
Extra option Anti-crease  
Weight of dry laundry  
*
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Silks handcare  
Max. load: 1 kg*  
Fabric type Silks, e.g. blouses and shirts.  
Notes  
– Smooths out creasing.  
– Fabrics are not completely dried in this programme. Remove  
garments as soon as the programme has finished and leave to  
finish drying at room temperature.  
Extra  
Low temperature. (Low temperature cannot be deselected),  
Anti-crease  
options  
Sportswear  
Max. load: 2 kg*  
Normal+, Normal, Hand iron r  
Garment  
Sportswear which is suitable for drying in a tumble dryer.  
Extra option Anti-crease  
Outerwear  
Max. load: 2 kg*  
Normal, Hand iron r  
Garment  
Outerwear which is suitable for drying in a tumble dryer.  
Extra option Anti-crease  
Proofing - Normal (drying level)  
Max. load: 2 kg*  
Item  
For drying microfibre fabrics, ski wear, fine, closeweave cotton  
garments (poplin) or tablecloths which are suitable for drying in a  
tumble dryer and have been treated to provide a water and dirt  
resistant finish.  
Notes  
– This programme includes a proofing fixing phase.  
Only use proofing agents which are stated by the  
manufacturer as being "suitable for use on membrane  
textiles" as these contain fluorochemical compounds.  
Do not dry items which have been treated with proofing  
agents containing paraffin. Fire hazard!  
Extra option Anti-crease  
Weight of dry laundry  
*
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programme chart  
Hygiene programmes  
In the Hygiene programmes the temperature is held constant for a longer period  
of time to deactivate micro-organisms, e.g. germs or house dustmites and also  
reduce the number of allergens in the laundry.  
These programmes should not be interrupted as this would prevent the  
micro-organisms from being deactivated.  
Extra option Anti-crease  
Cottons hygiene - Normal (drying level)  
Max. load: 6 kg*  
Fabric type Cottons and linen fabrics, which will be in direct contact with the  
skin, e.g. underwear, nappies, towelling, bed linen, pillow and  
mattress covers.  
Note  
Only for drying fabrics which can withstand higher temperatures  
and which have the q symbol on the care label.  
Minimum iron hygiene - Normal (drying level)  
Fabric type Minimum iron items made of synthetic or blended fabrics, e.g.  
skirts, shirts and blouses.  
Max. load: 3 kg*  
Note  
Only for drying fabrics which can withstand higher temperatures  
and which have the q symbol on the care label.  
Timed drying hygiene  
Max load:  
depending on  
fabric type  
Fabric type – 6 kg* of items made of cotton or linen fabric.  
– 3 kg* of minimum iron items made of synthetic or blended  
fabric.  
– For airing individual items of laundry which are already dry or for  
deactivating lice, dustmites and micro-organisms in washable  
materials which are suitable for drying in a tumble dryer, e.g.  
stuffed toys, and which have the q symbol on the care label.  
*
Weight of dry laundry  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing the programme sequence  
Once a programme has started - cancelling the programme and then  
removing the laundry  
- changing the programme  
^ Proceed as described in "Adding or  
removing laundry after a programme  
You cannot change to another  
programme once a programme has  
started (this prevents unintentional  
alterations).  
has started" below.  
^ Switch the dryer off after closing the  
door.  
If an attempt is made to change a  
selection, Option not possible will  
appear in the display.  
Adding or removing laundry  
after a programme has started  
It is still possible to select or deselect  
the Buzzer and the Anti-crease extra  
option.  
^ Press the Door button.  
^ Open the door.  
You will need to cancel the current  
programme before you can select a  
new one.  
,Danger of burning:  
Do not touch the back of the drum  
when adding or removing items. The  
drum and the items can get very hot.  
- cancelling the programme and then  
selecting a different programme  
^ Add or remove items as required.  
^ Close the door.  
^ Press the Start/Stop button.  
The "Stopped" option Cancel  
^ Press the Start/Stop button.  
programme will appear in the display.  
^ Confirm by pressing the right hand  
Menu button under OK.  
Time remaining  
The time left shown in the display may  
now vary from the actual drying time.  
The items will be cooled down,  
depending on the temperature  
reached and how long they have  
been dried for.  
If you press the Start/Stop button  
during the cooling down phase and  
confirm by pressing the right hand  
Menu button under OK, Finished will  
appear in the display.  
^ Switch the dryer off.  
^ Switch the dryer on.  
^ Select another programme and start  
it.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Emptying the condensed water  
container  
The condensed water will be collected  
in the condensed water container  
unless the appliance has been set up  
to drain via thedrain hose (see  
installation).  
Empty the condensed water  
container after every drying  
programme.  
The drying programme will be  
interrupted if the maximum level of the  
condensed water container is reached.  
A message will appear in the display.  
^ Open the shutter and empty out the  
water.  
^ To replace the container, hold it at a  
slight angle (as when removing it)  
and push it in gently until you feel it  
click into position.  
^ To remove the message from the  
display, switch the dryer off and then  
on again.  
Condensed water should not be  
consumed. It could lead to health  
problems for people and animals.  
Condensed water can be put to  
household use (e.g. used in a steam  
iron or humidifier). To ensure that any  
residual particles of fluff in the  
condensed water are removed before  
use, pass it through a fine sieve or  
paper filter first.  
^ Holding the container firmly in both  
hands, as shown, pull it out slightly  
towards the right-hand side.  
^ Hold the container in a horizontal  
position when carrying it.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the fluff filters  
^ Remove any fluff from the hollow part  
of the door opening. You could also  
use a cleaning brush which is  
available as an optional extra from  
your Miele dealer or the Miele Spare  
Parts Department, or use a vacuum  
cleaner.  
The fluff which is created by the drying  
process is collected by the fluff filters in  
the door and the door opening. Clean  
the filters after each drying  
programme*.  
Cleaning them whilst dry  
^ Also clean the door seal (2) with a  
damp cloth.  
Tip: You can also use a vacuum cleaner  
to remove the fluff.  
^ Once clean, push the filter back into  
the door holder until it clicks into  
position. Ensure it is facing the  
correct way.  
^ Open the door and pull the fluff filter  
(1) out of the door as illustrated.  
^ Use your fingers or a vacuum cleaner  
to remove the fluff from the two fluff  
filters in the door opening.  
^ Close the door.  
* Always check the fluff filters if the  
Clean out airways message appears.  
^ Use your fingers to remove the fluff  
from the surface of the filter.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning them with water  
,Do not replace them if they are  
damp or wet. Damp or wet filters  
could cause operational faults.  
If there is a great deal of compacted  
fluff on any of the filters, they can be  
removed and cleaned under hot  
running water.  
^ Push the large filter back into the  
door holder until it clicks into position.  
Ensure it is facing the correct way.  
^ Open the door and pull the fluff filter  
out of the door as described  
previously.  
^ Replace the filters in the door  
opening by first inserting them at the  
bottom and then pressing them into  
place at the top.  
The two filters in the door opening can  
also be removed if you need to clean  
them with water.  
^ Lock both dials.  
^ Turn dial a and pull the filter by the  
dial out of the door opening as shown  
b. Do the same on the other side.  
^ Rinse all the filters under hot, running  
water.  
^ Then shake the filters until no more  
water droplets are visible.  
^ Dry the filters thoroughly with care.  
^ Clean the area underneath these  
filters, e.g. with a vacuum cleaner.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the tumble dryer  
Disconnect the tumble dryer from  
the mains electricity supply.  
Miele branded cleaning and  
conditioning products are available to  
order from your Dealer, the Miele Spare  
Parts Department or via the internet on  
^ Clean the housing and control panel  
with a slightly damp cloth and a mild  
detergent or soapy water.  
^ The drum and other stainless steel  
parts can be cleaned with a suitable  
propietary stainless steel cleaner  
following the manufacturer's  
instructions.  
Do not use solvents, abrasive  
cleaners, glass cleaners or  
all-purpose cleaners. These could  
damage plastic sufaces and other  
parts. The tumble dryer must never  
be hosed down.  
^ Dry all parts with a soft cloth.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Cleaning the condenser unit  
Detergent residue, hair and fine fluff  
from the dryer can get through the fluff  
filters and block the condenser unit.  
Dust from the room in which the dryer is  
installed can also get into the  
condenser unit and cause a blockage.  
Check the condenser unit at least  
twice a year. Always check it if the  
Clean out airways message appears.  
If the dryer is used frequently then  
check the condenser unit after  
approx. 100 drying cycles. Clean it if  
necessary.  
^ Turn the lever on the inner cover  
downwards to the vertical position.  
^ Tilt the cover forwards.  
Removing the condenser unit  
^ Remove it by pulling it diagonally  
upwards.  
^ Open the service panel. Hold the  
panel securely when doing this.  
^ Turn the lever on the condenser unit  
upwards to the vertical position.  
^ Now remove the panel by pulling it  
diagonally upwards and place it to  
one side.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
If you cannot see any fluff:  
^ Replace the condenser unit (see  
following page).  
If you can see some fluff:  
^ Clean the condenser unit as  
described below.  
Cleaning the condenser unit  
^ When rinsing the condenser unit,  
make sure you position it as  
shown in the next two illustrations.  
^ Pull the condenser unit out of its  
housing by the handle.  
Checking the condenser unit  
^ Use a shower head or similar to rinse  
the unit out as shown.  
^ Hold the condenser unit up to the  
light as shown.  
^ Check to see if there is any fluff inside  
it.  
The arrows in the illustration above  
indicate where to look.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleaning and care  
Replacing the condenser unit  
^ With the handle facing upwards, push  
the condenser unit back into position  
in its housing.  
^ Turn the lever down to the horizontal  
position, making sure that the hook  
on the lever clicks into the groove.  
When replacing the inner cover after  
cleaning, ensure that the rubber seal  
fits correctly into the groove.  
^ Replace the inner cover making sure  
the hooks locate correctly. Hold it at  
an angle and push it gently  
downwards.  
^ Then flush the unit through from the  
front.  
^ Check the condenser unit again for  
any visible fluff and if necessary flush  
it through again until it has all gone.  
^ Then turn the lever upwards into the  
horizontal position to lock the cover.  
^ Replace the service panel and press  
the upper edge until it clicks into  
position.  
^ Remove any soiling still visible inside  
the housing unit by hand using a  
damp cloth. Do not try and access  
areas you cannot reach by hand!  
,It is important to ensure that both  
the condenser unit and the cover are  
correctly positioned and locked  
otherwise water may leak from the  
dryer.  
^ Also make sure the rubber seals are  
clean.  
The rubber seals must not be  
removed and must be free of kinks.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
With the help of the following notes, minor faults in the performance of the  
machine, some of which may result from incorrect operation, can be put right  
without contacting the Service Department.  
,Repair work to electrical appliances should only be carried out by a suitably  
qualified person in strict accordance with current local and national safety  
regulations. Repairs and other work by unqualified persons could be  
dangerous. The manufacturer cannot be held liable for unauthorised work.  
Fault messages in the display  
Problem  
Possible cause  
Remedy  
l
This is not a fault.  
Use the Warm air  
programme (timed  
drying) to dry individual  
items.  
Adjust the load  
The electronic unit has  
recognised that there is  
no laundry in the drum  
and cancelled the  
programme.  
+ the programme is  
cancelled, the buzzer  
sounds  
To delete the fault  
message:  
Drying individual  
– Open the door.  
garments or items which  
are already dry can also  
cause the programme to  
be cancelled.  
q
Please empty  
The condensed water  
container is full or the  
drain hose has a kink in it  
or is blocked.  
– Empty out the  
condensed water  
container or check the  
drain hose.  
the container  
+ the cooling down  
phase starts, the buzzer  
sounds  
To delete the fault  
message:  
– Switch the dryer off and  
then back on again.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
Clean out airways  
– The dryer is not working  
efficiently or economically.  
– Cleaning the filters is  
usually all that is required.  
However, if the message  
does not go out after you  
have cleaned the filters,  
then also check all the  
possible causes described  
under "The drying process  
goes on too long or even  
switches off".  
appears after the  
programme has  
finished  
Possible cause: The fluff  
filters are clogged with fluff  
or with detergent residues.  
– This message can also  
appear when using the  
Large pillows programme  
to dry a large pillow. The  
message does not indicate To delete the fault  
a fault in this instance.  
message:  
– Open the door.  
– Switch the dryer off and  
then back on again.  
You can adjust the setting  
which controls when or if the  
message Clean out airways  
appears. See "Settings  
menu J, Airways indicator").  
W
See above for possible  
To delete the fault  
message:  
Clean out airways  
causes and their remedies.  
+ the programme  
is cancelled, the  
buzzer sounds  
– Open the door.  
– Switch the dryer off and  
then back on again.  
– Then start the programme  
again.  
– If the fault message  
appears again, contact the  
Miele Service Dept.  
,
There is a fault.  
– Switch the dryer off and  
then back on again. Try to  
start a programme.  
Technical fault  
Call the Service  
Department  
A fault code, e.g. F51 also  
appears.  
– If the fault message  
appears again, contact the  
Miele Service Dept.  
+ the programme  
is cancelled, the  
buzzer sounds  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Other problems  
Problem  
Possible cause  
Remedy  
The drying  
Please check all the possible causes and switch the dryer  
process goes off and then back on again.  
on too long or  
Ventilation to and from the dryer Open a door or window while  
may be insufficient (e.g. the machine is in operation for  
even switches  
off.  
because it is installed in a small increased air flow.  
room). This has caused the  
temperature in the room to rise  
sharply.  
In some  
circumstances,  
Clean out  
airways still  
appears, even  
though the  
filters are  
The fluff filters are clogged up  
with fluff or were still wet when  
they were replaced.  
– Remove any fluff.  
– The fluff filters must be  
completely dry.  
The laundry has not been spun Make sure that your laundry is  
clean.  
sufficiently.  
thoroughly spun at the  
appropriate spin speed.  
The tumble dryer has been  
overloaded.  
Do not exceed the maximum  
load for the programme  
selected.  
Metallic components, e.g. zips – Open zips next time.  
have prevented the dryer from  
If the problem occurs again,  
registering the correct moisture  
dry garments with long zips  
level in the laundry.  
using the Warm air  
programme (timed drying).  
Detergent residues, hair and  
fine fibres can block up the  
condenser unit.  
Check the condenser unit  
from time to time and clean it  
if necessary.  
The vents below the door are  
blocked.  
Remove any objects that are  
blocking the vents.  
The laundry is The load consisted of different – Finish drying using the  
not sufficiently fabrics.  
dry.  
Warm air programme.  
– Select a different  
programme next time.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
Water leaks from the  
machine after the  
condenser unit has  
been cleaned.  
– The inner cover of the – Ensure that the  
condenser unit has not  
been locked properly  
and/or the condenser  
unit has not been  
condenser unit is  
positioned correctly  
and lock the inner  
cover.  
positioned correctly.  
– Check the rubber  
seals.  
– Fluff has collected in  
the condenser unit  
housing.  
– Use a cloth to remove  
any visible fluff from the  
inside of the condenser  
unit housing.  
Items made of synthetic Synthetic fibres tend to  
fibres are charged with attract static charge.  
static electricity after  
Static charge can be  
reduced by adding a  
fabric conditioner to the  
final rinse in the washing  
programme or a fabric  
conditioner sheet to the  
load when drying.  
drying.  
There is a build-up of  
fluff.  
Fluff is principally the  
result of friction when  
Fluff is collected by the  
fluff filters and can be  
garments are being worn easily removed (see  
and washed. Machine  
drying hardly causes any  
fluff to form and has been  
established by research  
institutes to have no  
"Cleaning and Care").  
appreciable effect on the  
lifetime of fabric.  
Feather filled pillows  
smell after drying.  
Feathers are a natural  
The smell will dissipate  
product and this is quite after sufficient airing.  
normal.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Problem  
Possible cause  
Remedy  
The programme does No obvious cause.  
not start and the  
– Is the dryer switched on?  
– Is the plug correctly  
inserted in the socket and  
switched on?  
display is dark.  
– Is the appliance door  
closed properly?  
– Has the fuse or circuit  
breaker tripped?  
The interior drum  
lighting does not  
come on.  
The lighting switches off Switch the dryer off and then  
automatically (to save  
energy).  
on again.  
The lamp needs  
changing.  
Change the lamp as  
described at the end of this  
section.  
The display is in a  
different language.  
A different language  
has been selected.  
Set the language you want.  
The flag symbol will guide you.  
See "Language" at the end of  
this booklet.  
The Start/Stop button This is not a fault.  
After the programme has  
started, the flashing will  
change to a constant light.  
indicator light flashes  
The flashing indicates  
when a programme is  
that a programme can  
being selected.  
be started.  
The display is dark.  
The display has  
switched off  
The display will light up when  
one of the buttons is pressed.  
The Start/Stop button  
indicator light flashes  
slowly.  
automatically to save  
energy (Standby  
mode).  
If the problem  
continues there is a  
fault.  
Contact the Miele Service  
Department.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problem solving guide  
Changing the lamp  
The lamp specification and  
Disconnect the tumble dryer from  
the mains electricity supply.  
maximum wattage is stated on the  
data plate and on the lamp cover.  
^ Open the door.  
^ Replace the lamp.  
You will find the interior lamp cover at  
the top of the drum aperture.  
^ To close the cover push it upwards  
and press it on the left and right until  
you hear it click into position.  
,Ensure that it is fitted into  
position securely, as any moisture  
could cause a short circuit.  
^ Insert a suitable tool, such as a wide  
bladed screwdriver, under the side  
edge of the lamp cover as illustrated.  
^ Apply a little pressure and whilst  
doing so turn your wrist in the  
direction of the arrow to open the  
cover.  
The cover will open downwards.  
The temperature resistant lamp should  
only be ordered from your Miele Dealer  
or the Miele Spare Parts Department.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After Sales service  
In the event of any faults which you  
Future updates (PC)  
cannot remedy yourself, please contact  
The indicator or check light marked PC  
on the fascia panel is the interface used  
by the Miele service technicians during  
service work for testing purposes and  
for updating the appliance's  
– your Miele dealer or  
– the Miele Service Department (see  
back cover for contact details).  
N.B. A call-out charge will be applied  
for unnecessary service visits where the  
problem could have been rectified by  
the customer as described in this  
instruction manual.  
programme data.  
Appliance guarantee  
Please see the guarantee card supplied  
with your appliance.  
When contacting your dealer or the  
Service Department, please quote the  
model and serial number of your  
appliance, both of which are shown on  
the data plate situated on the right hand  
side below the drum aperture.  
Optional accessories  
Optional accessories for this dryer are  
available from your Miele Dealer, the  
Miele Spare Parts Department or via the  
Please note that telephone calls may  
be monitored and recorded for  
training purposes.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Front view  
aMains connection cable  
bCondensed water container  
cControl panel  
fFour height adjustable screw feet  
gExternal drainage options (e.g. via  
wash basin, wash basin drain outlet  
or gully)  
dDoor (can be fitted with a decor  
panel)  
eService panel for condenser unit  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Installation site  
,Make sure the dryer door can be  
opened without hindrance after  
installation.  
Building under a continous worktop /  
in a kitchen run  
This tumble dryer is specially designed  
for installation under a continuous  
worktop run in a fitted kitchen.  
– The slides (available to order) should  
be used to protect the floor from  
damage when the dryer is pushed  
into position or taken out for  
servicing.  
– The electrical socket must be located  
in an accessible position near the  
machine.  
Please note:  
Niche height  
Accessory  
820 mm  
None required  
N = Niche height (820-930 mm)  
from 830-840 mm Fit longer screw feet* (set to  
approx. 40 mm)  
It is supplied fitted with a cover plate  
instead of an appliance lid. The  
cover plate is necessary to ensure  
electrical safety and must not be  
removed.  
from 870-885 mm Use one raising kit*  
from 915-930 mm Use two raising kits*  
* optional accessory  
The dryer must not be used without  
the front panel in place.  
When moving the dryer do not hold it  
by the door.  
If the kitchen run has a continuous  
furniture plinth in place, a gap must  
be made for the tumble dryer.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Aligning the appliance  
Room in which the dryer is located  
Air taken in for use in the drying  
process will be warm when it is  
expelled from underneath the dryer.  
This expelled air heats up the air in the  
room. It is therefore very important to  
ensure that the room is adequately  
ventilated, particularly if the dryer is  
located in a small room. Otherwise  
running times and energy consumption  
could be increased.  
Washer-dryer stack  
The tumble dryer can also be  
combined with a Miele washing  
machine in a washer-dryer stack. To do  
this the appropriate stacking kit (WTV)  
(available to order) is required.  
^ Turn the 4 screw feet to adjust the  
dryer to the correct height and level.  
Longer screw feet are available as an  
optional accessory. Unscrew and  
remove the feet supplied with the  
dryer before fitting the longer screw  
feet.  
,The stacking kit must be fitted by  
suitably qualified fitter.  
Before moving the tumble dryer  
again (e.g. when moving house)  
The cover plate on the dryer must be  
aligned horizontally underneath the  
worktop.  
After each use a small quantity of  
condensed water will collect in the area  
around the pump. This water can run  
out, if the dryer is tipped up when it is  
being moved. It is a good idea to run  
the Cool air programme for  
,The ventilation gaps in the plinth  
must not be covered over as this  
would prevent a sufficient intake of  
air.  
approximately 1 minute before moving  
the dryer. Any remaining condensed  
water will then be fed into the  
condensed water container or out  
through the drain hose.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Matching the fascia panel to  
the height of adjacent drawer  
fronts  
Removing the spacer bars  
All the spacer bars can be removed if  
the upper edge of the front panel needs  
to be flush with the upper edge of the  
appliance front directly underneath the  
fascia panel. See "Fitting a front panel  
made by another manufacturer".  
The fascia panel can be aligned with  
the drawer fronts by adjusting the  
spacer bars.  
^ Open the door.  
^ Using a socket spanner, turn  
clockwise or anti-clockwise until the  
required height is reached.  
^ Unscrew and remove the 3 screws  
(see arrows).  
If necessary individual bars can be  
removed or more added.  
^ Remove all the spacer bars.  
The 3 holes which are now free should  
be used to screw the front panel to the  
machine front later on.  
^ To do this, use the socket spanner to  
loosen the nuts.  
An adapter kit with spacer bars and  
longer screws can be ordered as an  
optional accessory. This can be used to  
add spacer bars from below up to a  
maximum of 25 mm.  
After fitting the bars, cut or pinch off any  
excess length from the screws.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Fitting the front panel  
Fitting the front panel  
The appliance front can be fitted with a  
door panel to match other kitchen units.  
^ Open the door.  
^ Hold the front panel in the correct  
position in front of the appliance door.  
If fitted in a Miele kitchen, the door  
panel can be ordered pre-drilled with  
the necessary fixing holes.  
If fitted in a non-Miele kitchen, a  
suitable panel will have to be drilled  
to suit by a qualified kitchen fitter.  
See "Fitting a door front panel made  
by another manufacturer" for details  
on preparing and drilling the fixing  
holes.  
Front panel dimensions  
Width: 592-596 mm  
^ Screw the front panel to the machine  
door.  
Thickness: 17 to 19 mm (corresponding  
to the thickness of the adjacent unit  
door front panels)  
If all the spacer bars have been  
removed:  
You can also make use of the 3 holes at  
the top of the door plate to screw the  
front panel to the door plate.  
Height: The height of the door front  
panel corresponds to the door height  
(H) of the adjacent units.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Fitting a door front panel made BMark the two hinge holes and the  
four smaller holes as shown in the  
by another manufacturer  
diagram.  
Preparing the front panel  
For left hand hinging only:  
AMeasure distance X for drilling the  
hinge holes.  
– front panel shown decor side face  
down, upper edge at the bottom:  
– with spacer bars:  
if width (b) increases, measurement a  
– without spacer bars:  
must also be increased  
(the front panel must be  
b = 592 mm N a = 21.5 mm  
b = 593 mm N a = 22.0 mm  
correspondingly higher)  
b = 594 mm N a = 22.5 mm  
b = 595 mm N a = 23.0 mm  
b = 596 mm N a = 23.5 mm  
H = height of adjacent furniture unit  
doors.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
For right hand hinging only:  
CDrill the two hinge holes (C 35  
mm/15.5 mm deep) in the back of the  
front panel.  
– front panel shown decor side face  
down, upper edge at the bottom:  
DNext, drill the four smaller holes  
(C 7 mm/10 mm deep) in the back of  
the front panel.  
EShorten the front panel from the  
bottom to height H.  
Preparing the fixing points  
FHold the pre-drilled front panel in the  
correct position in front of the  
machine door.  
if width (b) increases, measurement a  
must also be increased  
b = 592 mm N a = 21.5 mm  
b = 593 mm N a = 22.0 mm  
b = 594 mm N a = 22.5 mm  
b = 595 mm N a = 23.0 mm  
b = 596 mm N a = 23.5 mm  
H = height of adjacent furniture unit  
doors.  
GMark the fixing points on the back of  
the front panel through the holes in  
the machine door plate (see arrows  
in the illustration).  
HRemove the front panel.  
INow drill holes (C 2.5 mm/10 mm  
deep) in the back of the front panel.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Fitting a plinth facing  
Useful tip:  
The gap between the lower edge of the If the dryer is fitted on a raising kit, you  
tumble dryer plinth and the floor can be can use double-sided adhesive tape on  
closed up using a suitable kitchen  
furniture plinth facing.  
the back of the plinth facing to secure it  
to the raising kit.  
The tumble dryer plinth has a special  
groove in which a plinth facing can be  
fitted.  
Plinth facing dimensions  
Length: 592 - 596 mm  
Thickness: 8 mm  
Height (H): The plinth facing height  
must be calculated after aligning the  
height of the appliance with the screw  
feet or after fitting the raising kit(s).  
Installation  
^ Calculate height (H) from the floor up  
into the groove (on the underside of  
the tumble dryer).  
^ Cut the plinth facing to size.  
^ Slide it into the groove.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External condensed water  
outlet  
General notes  
When drying is in progress, condensed  
water is pumped into the condensed  
water container through the drain hose  
at the back of the dryer. The condensed  
water can also be drained off directly if  
the dryer is installed near a sink, drain  
outlet etc. so that the condensed water  
container does not have to be emptied.  
Drain hose length . . . . . . . . . . . . 1.00 m  
^ Unclip the drain hose from clips (1)  
and (2).  
Extension hose . . . . . . . . . . . . . . 2.00 m  
(accessory)  
Maximum delivery head . . . . . . . 1.50 m  
Maximum drain hose length . . . . 4.00 m  
,If the on-site water drainage  
system is not fitted with a non-return  
valve or an appropriate air gap, an  
air gap or the non-return valve  
supplied with the dryer must be  
fitted to prevent the risk of back-flow.  
(See "Installation conditions  
requiring a non-return valve").  
Maximum delivery head  
with non-return valve fitted . . . . . 1.00 m  
^ Then pull it off connection (3).  
^ The lower clip (4) can be opened to  
allow you to take the drain hose out or  
to feed the mains cable through it.  
Arranging the drain hose  
,Do not pull on the drain hose  
and do not stretch it or allow it to  
become kinked as it could get  
damaged.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
External drainage via a sink or gully  
Example: Connection to a sink drain  
outlet  
^ See "Front view" illustration.  
The drain hose with non-return valve  
fitted can be connected directly to a  
suitable sink drain outlet.  
,If you want to drain the water off  
into a sink you will need to secure  
the hose carefully, e.g. by tying it to a  
tap to make sure it cannot slip  
during use. Otherwise there is a risk  
of overflowing water which could  
cause damage.  
^ Use the bow-shaped guide to prevent  
the drain hose from becoming kinked  
(see "Front view" illustration).  
Installation conditions requiring a  
non-return valve  
,If the on-site water drainage  
system is not fitted with a non-return  
valve or an appropriate air gap, an  
air gap or the non-return valve  
^ Remove the following from the back  
of the dryer at the bottom:  
Adapter 1 and hose clip 3 behind it.  
supplied with the machine must be  
fitted to prevent the risk of back-flow.  
Otherwise water could leak out of  
the dryer and cause damage.  
A non-return valve is required:  
– If the tumble dryer is connected to a  
sink drain outlet (see the following  
section).  
– If the tumble dryer is to be  
connected to a drainage system  
already in use by another appliance,  
e.g. a dishwasher or washing  
machine.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
^ Fit adapter 1 to the sink drain outlet  
using nut 2.  
If this nut has a flat disc in it you  
should take the disc out first.  
^ Attach the end of the extension hose  
4 to adapter 1.  
^ Use a screwdriver to tighten hose clip  
3 up close to the nut.  
,Non-return valve 5 has to be  
fitted with the arrow pointing in the  
direction of flow (i.e. towards the  
sink). Otherwise water will not drain  
out of the machine.  
^ Fit non-return valve 5 to the drain  
hose on the dryer 6 (make sure it is  
fitted correctly (see arrow on  
non-return valve).  
1 Adapter  
2 Nut  
3 Hose clip  
^ Secure the non-return valve using  
hose clips.  
4 Extension hose (accessory)  
5 Non-return valve (accessory)  
6 Tumble dryer drain hose  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical connection  
Electrical connection U.K.  
Non-rewireable plugs BS 1363  
All electrical work should be carried out The fuse cover must be refitted when  
by a suitably qualified and competent  
person, in strict accordance with  
current national and local safety  
regulations (BS 7671 in the UK).  
changing the fuse, and if the fuse cover  
is lost, the plug must not be used until a  
suitable replacement is obtained. The  
colour of the correct replacement cover  
is that of the coloured insert in the base  
of the plug, or the colour that is  
Ensure power is not supplied to the  
appliance until after installation work  
has been carried out.  
embossed in words on the base of the  
plug (as applicable to the design of  
plug fitted).  
The appliance is supplied with a mains  
cable with moulded plug ready for  
connection to a 230-240V mains supply.  
Please ensure the connection data  
quoted on the data plate match the  
household mains supply.  
Replacement fuses should be ASTA  
approved to BS 1362 and have the  
correct rating. Replacement fuses and  
fuse covers may be purchased from  
your local electrical supplier.  
Connection should be made via a  
suitable switched socket which is easily  
accessible after installation.  
WARNING: THIS APPLIANCE  
MUST BE EARTHED  
For extra safety it is advisable to install  
a suitable residual current device  
(RCD). Contact a qualified electrician  
for advice.  
Do not connect via an extension lead.  
Extension leads do not guarantee the  
required safety of the appliance (e.g.  
danger of overheating).  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Consumption data  
Programme  
Load  
Final spin speed  
Energy Duration  
in a domestic washing machine  
kg*  
6.0  
rpm  
kWh  
Minutes  
Cottons  
Normal  
1000 (60 % residual moisture)**  
3.35  
3.05  
2.90  
2.55  
2.50  
94  
86  
82  
74  
73  
1200  
1400  
1600  
1800  
Cottons  
6.0  
1000 (60 % residual moisture)**  
2.65  
2.35  
2.20  
1.90  
1.80  
71  
63  
60  
52  
51  
Hand iron rr  
1200  
1400  
1600  
1800  
Minimum iron Normal  
Minimum iron Hand iron  
Delicates Normal  
Automatic Normal  
Shirts Normal  
3.0  
3.0  
2.0  
3.5  
2.0  
3.0  
2.0  
1.0  
1200 (40 % residual moisture)**  
1.15  
1.05  
1.20  
2.10  
1.25  
2.40  
0.15  
0.15  
0.30  
1.35  
1.40  
1.25  
3.70  
1.45  
1.30  
34  
31  
81  
119  
43  
119  
4
1200  
800  
800  
600  
Denim Normal  
900  
Woollens handcare  
Silks handcare  
1000  
400  
5
Smoothing  
3.0  
2.0  
2.0  
2.0  
6.0  
3.0  
1.2  
1000  
600  
8
Sportswear Normal  
Outerwear Normal  
Proofing  
61  
72  
59  
118  
58  
129  
800  
800  
Cottons hygiene  
Minimum iron hygiene  
Large pillows  
1000  
1200  
1200  
*
Weight of dry laundry  
** EN 61121:2005 test programme  
All data without a "star" against it was calculated using EN 61121:2005.  
Before testing in accordance with EN 61121, dry a 3 kg load of cotton laundry with 70% residual  
moisture as per the above standard using the Cottons Normal programme without any extra options.  
Consumption data can vary from the nominal values given above depending on the size of the  
load, types of textiles, residual moisture levels after spinning, fluctuations in the electricity  
supply and any extra options selected.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Height  
820 mm  
595 mm  
575 mm  
Yes  
Width  
Depth  
Suitable for stacking  
Weight  
54 kg  
Drum volume  
Maximum capacity  
100 litres  
6 kg dry weight  
Capacity of condensed water container approx. 3.5 litres  
Drain hose length  
Maximum delivery head  
Maximum drain hose length  
Length of connection cable  
Voltage  
950 mm  
1.5 m  
4 m  
2 m  
see data plate  
see data plate  
Connected load  
Fuse rating  
see data plate / plug  
see data plate  
Lamp wattage  
Energy consumption  
Test certificates awarded  
see "Consumption data"  
see data plate  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
for changing  
default settings  
The Settings menu is used to alter the  
dryer's electronics to suit different  
requirements.  
Settings can be altered at any time.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
To open the Settings menu  
^ Close the door.  
Language J  
The display can be set to appear in  
one of several different languages.  
^ Switch the dryer on.  
^ Press both menu buttons at the same  
time until the following appears in the  
display:  
^ Select the language you want by  
pressing the left hand Menu button  
under ~ (Continue).  
Settings  
A tick L will appear beside the  
language to show that it has been set.  
Language F  
The flag J after the word Language  
acts as a guide to prevent a language  
which will not be understood from being  
set.  
Continue  
OK  
You are now in the Settings menu.  
Select the setting you want with the left  
hand Menu button under Continue,  
and confirm your selection with the right  
hand Menu button under OK.  
To close the Settings menu  
Settings  
Back A  
Continue  
OK  
^ Press the right hand Menu button  
under OK.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
Time (of day)  
Drying levels  
First select either a 24 hour or 12  
hour clock . You can then set the  
current time of day.  
You can alter the drying levels for the  
Cottons and Minimum iron  
programmes.  
The bar chart shows you the setting.  
Factory default: a medium setting.  
To set the clock format  
Clock format  
rrr (damper)  
The programme duration is shorter.  
24 h clock B  
r (drier)  
The programme duration is longer.  
Continue  
OK  
^ Select the clock format you want with  
the left hand Menu button under  
Continue, and confirm your selection  
with the right hand Menu button  
under OK.  
Extended cool down  
The cooling down phase which takes  
place before the end of a programme  
can be lengthened if required. This  
makes the garments easier to handle.  
To set the time  
^ Select the Time sub-menu and use  
the Menu buttons to set the time.  
The bar chart shows you the setting.  
Factory default: 0 mins (normal cooling  
down period)  
You can select an extended cool down  
time in 2 minute increments up to a  
maximum of 18 minutes.  
You cannot extend the cooling down  
time for the Warm air, Cool air, Timed  
drying hygiene, Woollens handcare,  
Silks handcare or Smoothing  
programmes.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
Airways indicator  
Lock code  
Fluff should be removed after drying.  
The Clean out airways indicator will  
remind you to clean the filters when a  
certain amount of fluff has collected.  
You can decide at what level of fluff  
this reminder should be given.  
The lock code prevents your machine  
being used without your knowledge.  
When the code has been activated, you  
have to enter a code after switching the  
dryer on. Otherwise the dryer cannot be  
operated.  
You will have an idea of how often this  
should be done after a few drying  
programmes.  
To activate the lock code  
Lock code  
Normal  
Activate  
Factory default  
Continue  
OK  
Light  
Clean out airways appears when there  
is only a small build-up of fluff  
^ Press the right hand Menu button  
under OK.  
Off  
^ The display will now request that a  
lock code is entered. The lock code  
is 250 and cannot be altered.  
Clean out airways does not appear  
Heavy  
Clean out airways only appears when  
there is a heavy build-up of fluff  
To enter the lock code  
A tick L will appear beside the option  
to show that it has been set.  
Lock code  
0 _ _  
-
OK  
^ Enter the first number with the left  
hand Menu button under -. Confirm  
your selection of this number by  
pressing the right hand Menu button  
under OK. Now enter the second  
number.  
^ Repeat the process until all three  
numbers have been entered.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
Confirm lock code  
2 5 0  
Back A  
OK  
^ Confirm the lock code by pressing  
the right hand Menu button under OK  
or, if you have made a mistake, press  
the left hand Menu button under  
Back A.  
The following will appear in the display:  
X
Lock code activated.  
Entry OK  
Once the machine is switched off, it can  
only be used again if the lock code is  
entered.  
To use the dryer when the lock code  
is activated  
When the machine is switched on  
again, the display will request the lock  
code.  
^ Enter code 250 as described above  
and confirm the entry.  
The dryer is now unlocked and ready  
for use.  
To deactivate the lock code  
Proceed as for activating the code.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Settings menu J  
Buzzer  
There are two options:  
On  
The buzzer has two volumes.  
Standby is activated:  
Normal (Factory default)  
The buzzer sounds at the end of a  
programme.  
– if a programme is not selected within  
10 minutes of the tumble dryer being  
switched on.  
Loud  
– 10 minutes after a programme has  
started.  
The buzzer sounds at maximum volume  
at the end of a programme.  
– 10 minutes after the end of a  
programme.  
A tick L will appear beside the option  
to show that it has been set.  
Not in current prog.  
(Factory default)  
Keypad tone  
– Standby is activated if a programme  
is not selected within 10 minutes of  
the tumble dryer being switched on  
and after the end of a programme.  
(Standby is not activated after a  
programme has started).  
An audible tone sounds each time a  
button is pressed.  
A tick L will appear beside the option  
to show that it has been set.  
Factory default: Off.  
Pressing one of the buttons switches  
the display back on again.  
Contrast  
A tick L will appear beside the option  
to show that it has been set.  
Brightness  
There are ten different display  
contrast and display brightness  
settings.  
Memory  
The electronics will memorise the  
drying level and any extra options  
selected for the current drying  
programme.  
The bar chart shows you the setting.  
Factory default: a medium setting.  
Standby display  
A tick L will appear beside the option  
to show that it has been set.  
Factory default: Off.  
To save energy, the display goes out  
after 10 minutes and the indicator  
light for the Start/Stop button will start  
flashing slowly.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Alteration rights reserved/2008  
M.-Nr. 06 731 781 / 01  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Miele Cooktop KM 3464 User Manual
New Holland Lawn Mower 4000 Series User Manual
NordicTrack Home Gym CTK65020 User Manual
Northern Industrial Tools Grinder 143388 User Manual
Nvidia Computer Hardware 8500 GT User Manual
Optoma Technology Projector TX7155 User Manual
Orange Micro Radio B31100004 B User Manual
Panasonic Answering Machine KX T5000 User Manual
Panasonic Flat Panel Television EE23 User Manual
Patton electronic Network Router IM1 I User Manual