Operating instructions
for condenser tumble dryer
T 8623 C
en - GB
To avoid the risk of accidents
or damage to the appliance
it is essential to read these
instructions before it is installed
and used for the first time.
M.-Nr. 06 884 700
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Caring for the environment. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Operating the tumble dryer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Notes on laundry care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Care symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Tips on drying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
How to dry correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Brief instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Extra options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Low temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Short. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Anti-crease. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Delay start. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programme chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Changing the programme sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Once a programme has started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
- changing the programme. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
- cancelling the programme and then selecting a different programme . . . . . 25
- cancelling the programme and then removing the laundry . . . . . . . . . . . . . . 25
Adding or removing laundry after a programme has started. . . . . . . . . . . . . . . . . 25
Time remaining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Emptying the condensed water container . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Cleaning the fluff filters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning them whilst dry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Cleaning them with water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Cleaning the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Cleaning the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Removing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Checking the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Cleaning the condenser unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Replacing the condenser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Fault messages in the display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Other problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Changing the lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
After Sales service. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Future updates (PC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Appliance guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Front view. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Transporting the tumble dryer to its installation site . . . . . . . . . . . . . . . . . . . . . 41
Building under a continous worktop / in a kitchen run . . . . . . . . . . . . . . . . . . . 41
Levelling the tumble dryer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Room in which the dryer is located. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Washer-dryer stack. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Before moving the tumble dryer again (e.g. when moving house). . . . . . . . . . 42
External condensed water outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Arranging the drain hose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
External drainage via a sink or gully . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Installation conditions requiring a non-return valve . . . . . . . . . . . . . . . . . . . . . 44
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Electrical connection U.K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Consumption data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Settings menu J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
To open the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
To close the Settings menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Language J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Time (of day) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Drying levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Extended cool down . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Airways indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Lock code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Buzzer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Keypad tone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Standby display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct application
This tumble dryer is only intended
~
for drying fabrics which have been
washed in a water solution, and marked
on the manufacturer's care label as
being suitable for tumble drying.
"Dry cleaning kits" for freshening up
garments in a tumble dryer are
increasingly available on the market. If
using, do so at your own risk, and follow
the instructions provided on the
packaging.
It is essential to read these
~
instructions.
This tumble dryer conforms to
current safety requirements.
Inappropriate use can, however, lead
to personal injury and damage to
property.
Any other applications may be
dangerous. Miele cannot be held liable
for damage resulting from incorrect or
improper use or operation.
To avoid the risk of accidents and
damage to the tumble dryer, please
read these instructions carefully
before using it for the first time. They
contain important information on its
safety, installation, use and
This appliance is not intended for
~
use by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience or
knowledge, unless they are supervised
whilst using it or have been shown how
to use it by a person responsible for
their safety.
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
Safety with children
Keep children away from the tumble
~
dryer at all times. It is not a toy! To avoid
the risk of injury do not allow them to
play on or near it or to play with its
controls. Supervise children whilst you
are using it.
Older children may only use it if its
~
operation has been clearly explained to
them, and they are able to use it safely,
recognising the dangers of incorrect
use.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Technical safety
Faulty components must only be
~
replaced by genuine Miele original
Before setting up the tumble dryer,
~
spare parts. Only when these parts are
fitted can the safety standards of the
tumble dryer be guaranteed.
check it for any externally visible
damage.
Do not install or use a damaged tumble
dryer.
If the connection cable is faulty it
~
must only be replaced by a Miele
approved service technician to protect
the user from danger.
Before connecting the tumble dryer,
~
ensure that the connection data on the
data plate (voltage and connected
load) match the mains electricity
supply. If in any doubt, consult a
qualified electrician.
In the event of a fault or for cleaning
~
purposes, the tumble dryer is only
completely isolated from the electricity
supply when:
The electrical safety of this tumble
~
dryer can only be guaranteed when
continuity is complete between it and
an effective earthing system which
complies with current local and national
safety regulations. It is most important
that this basic safety requirement is
present and regularly tested, and where
there is any doubt the household wiring
system should be inspected by a
qualified electrician. Miele cannot be
held liable for the consequences of an
inadequate earthing system (e.g.
electric shock).
– it is switched off at the wall socket
and the plug is withdrawn, or
– it is switched off at the mains, or
– the mains fuse is disconnected, or
the screw-out fuse is removed (in
countries where this is applicable).
This tumble dryer may only be used
~
in mobile installations such as ships if a
risk assessment of the installation has
been carried out by a suitably qualified
engineer.
In countries where there are areas
~
Do not connect the tumble dryer to
~
which may be subject to infestation by
cockroaches or other vermin, pay
particular attention to keeping the
tumble dryer and its surroundings in a
clean condition at all times. Any
damage which may be caused by
cockroaches or other vermin will not be
covered by the guarantee.
the mains electricity supply by an
extension lead. Extension leads do not
guarantee the required safety of the
tumble dryer (e.g. danger of
overheating).
Unauthorised repairs could result in
~
unforeseen dangers for the user, for
which Miele cannot accept liability.
Repairs should only be undertaken by a
Miele approved service technician.
Ensure current is not supplied to the
tumble dryer until after maintenance or
repair work has been carried out.
Do not make any alterations to the
~
tumble dryer, unless authorised to do
so by Miele.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
Correct use
To prevent the risk of fire, the
~
following must not be dried in this
To prevent the risk of fire, the
~
tumble dryer:
following textiles must not be dried in
this tumble dryer:
– fabrics which contain a large
proportion of rubber, foam rubber or
rubber-like materials. For example,
products made from latex foam
rubber, shower caps, waterproof
textiles, rubberised articles and items
of clothing and pillows with foam
rubber filling.
– items which have not been washed.
– items, such as workwear, which have
not been thoroughly cleaned and
which are still soiled with grease, oil
or other desposits (such as
cosmetics, lotions etc).
If items have not been thoroughly
cleaned there is a danger that these
might ignite when heated, even after
they have been removed from the
dryer at the end of the programme.
– items which contain padding or
fillings (e.g. pillows, jackets). If these
were damaged the filling could get
out with the risk of igniting in the
dryer.
– items which have been treated with
inflamable cleaning agents or
contain residues of acetone, alcohol,
benzine, petrol, stain remover,
turpentine, wax, wax remover or other
chemicals (e.g. mops and floor
cloths).
In many programmes, the heating
~
phase is followed by a cooling down
phase to ensure that the items are not
too hot to handle when you remove
them (this also avoids the danger of the
laundry self-igniting). The programme is
not finished until the cooling down
– items which have been splashed with phase is complete.
hair lacquer, hair spray, nail varnish
remover or similar substances.
Ensure that you always wait until the
end of the programme before removing
the laundry.
When washing such heavily soiled
items ensure that you use sufficient
detergent and select a high
temperature. If in doubt, wash the
items several times.
Warning: Do not switch the tumble
~
dryer off before the end of the drying
programme. If this was done and the
laundry was then removed immediately,
it could give off a great amount of heat.
Fabric conditioner and similar
~
products must be used according to
the instructions on the manufacturer's
packaging.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning and Safety instructions
The dryer must not be used without
Always keep the area around the
~
~
the fluff filters in place or if the fluff filters tumble dryer free of dust and fluff. Dust
are damaged in any way.
drawn into the tumble dryer can cause
blockages in the condenser unit over
time.
The fluff filters must be cleaned
~
regularly.
Do not let anyone sit or lean on the
~
The dryer must not be used without
~
door, as this can cause the tumble
dryer to tip up.
the condenser unit in place.
The fluff filters must be thoroughly
~
Always close the door after use. This
~
dried after cleaning. Damp or wet filters
could cause operational faults.
way you will avoid the danger of:
– children climbing onto or into the
dryer or hiding things in it.
Do not install the tumble dryer in a
~
room where there is a risk of frost
occurring. At temperatures around
freezing point the tumble dryer may not
be able to operate properly.
– pets or other small animals climbing
into it.
The tumble dryer must not be hosed
~
There is a risk of damage if the
condensed water is allowed to freeze in
the pump, hoses and / or condensed
water container.
down.
Accessories
The ambient room temperature should
be between +2°C and +35°C.
Only use genuine Miele spare parts
~
and accessories with this appliance.
If non-Miele parts are used, guarantee,
performance and product liability
claims may be invalidated.
If the water is drained externally
~
through the drain hose instead of being
collected in the condensed water
container, make sure the drain hose is
securely attached if you hang it in a sink
or basin to avoid the hose slipping and
the water causing damage.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
Condensed water is not drinking
~
water.
It can cause health problems in both
people and animals.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Control panel
aStart/Stop button
eExtra option buttons
For starting a programme and
cancelling a programme once it has
started.
Various extra options can be added
to the drying programmes.
fProgramme selector
The indicator light flashes while a
programme is being selected and
then lights up constantly after it has
started.
The programme selector can be
turned clockwise or anti-clockwise.
gI-On/0-Off button
bDisplay with Menu buttons
To switch the machine on or off or to
interrupt a programme.
See the next page for more
information.
hDoor button
cm button
Pressing this button will open the
door even when the machine is
switched off at the mains.
For selecting delay start and calling
up the time of day in the display.
dPC / Optical interface
This is used by service technicians to
run diagnostic checks on your
appliance and can also be used to
update programming data in the
future.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Display
Selecting programmes via the
display
The display is used for the following:
By turning the programme selector to
Further programmes, you can select
one of the following programmes:
Selecting and displaying settings
– Selecting different drying levels (e.g.
Hand iron, Normal ...)
– Standard pillows
– Large pillows
– Sportswear
or the duration of the Warm air, Cool
air and Timed drying hygiene
programmes
– Selecting delay start
– Outerwear
– Displaying the drying duration
(Estimated time remaining)
– Proofing
– Minimum iron hygiene
– Timed drying hygiene
Note
All the display illustrations and times
given in these instructions are
examples, and can vary.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the tumble dryer
Menu buttons
Programme duration / Estimated time
remaining
When a programme is selected, the
estimated duration (time remaining) will
appear in the display. Please be aware
that it is only an estimate!
The following factors all affect the
estimated time remaining: residual
moisture content after spinning; type of
fabric; size of load; room temperature;
fluctuations in power supply.
The electronics continually assess
conditions in the machine and adjust
the estimated time remaining for a more
accurate reading. Because of this, the
time displayed can alter during the
course of a programme.
Various settings are made via the Menu
buttons.
They are used to alter or confirm the
value displayed above the vertical line.
In the same way, the Woollens
handcare, Silks handcare and
Smoothing programmes can finish
earlier than expected if a certain
temperature is reached. This can
happen with particularly fine fabrics,
very small loads or if items were partly
dry beforehand.
To alter a setting:
Cottons
Duration:
1:52 h
Extra dry
Pressing the right or left hand Menu
button selects the drying level.
To confirm a setting:
Further programmes
Outerwear
Continue
OK
Pressing the left hand Menu button
under Continue calls up further
programmes, and you can then confirm
your selection of the highlighted
programme by pressing the right hand
Menu button under OK.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Before using for the first time
When the tumble dryer is switched on
for the first time, the welcome screen
will appear.
The display for setting the time will then
appear.
Setting the time (of day)
The welcome screen will appear in the
display every time you switch the
machine on until you have run a
12:00
programme lasting longer than 1 hour.
Change
OK
The display for setting the language will
then appear.
^ Select the hours you want by
pressing the left hand Menu button
under Change, and confirm this with
the right hand Menu button under
OK.
Setting the language
You need to select the language you
require for the display.
^ Then set and confirm the minutes.
The entry menu will appear.
Entry menu
You can select a different language
from the one shown.
It is possible to change the language at
any time via the Settings menu.
The entry menu showing the current
time of day will appear after the
machine has been switched on, until
you select a programme.
Language
english
)
OK
10 : 00
^ Select the language you require by
pressing the left hand Menu button
under ~.
Select programme
^ You can now load the laundry into the
dryer and select a programme as
described in "How to dry correctly".
^ Confirm your selection by pressing
the right hand Menu button under
OK.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on laundry care
Care symbols
– Down-filled garments have linings
which have a tendency to shrink,
depending on the quality of the item.
They can be partially dried using the
Smoothing programme.
Before drying check the drying symbol
on the care label. If there are no
symbols, dry at your own risk!
q . . . . . . . . . Dry at normal temperature
r. . . . . . . . . . . . Dry at low temperature
s . . . . . . . . . . . . . . . Do not tumble dry
– Pure linen should only be machine
dried if specified as suitable by the
manufacturer on the care label, as
the surface of the fabric may
Tips on drying
otherwise become rough. They can
be partially dried using the
– Always observe the maximum
recommended loads given in the
"Programme chart". Never overload
the drum.
Smoothing programme.
– Loopknit garments (e.g. T-shirts and
underwear) tend to shrink depending
on their quality. Do not over-dry these
textiles. Be particularly careful when
using the Hygiene programmes.
When purchasing these garments it
is advisable to take their shrinkage
properties into account.
Overloading can cause unnecessary
wear and tear to the laundry, give a
disappointing drying result and
cause more creasing.
– Do not put soaking wet items into the
tumble dryer. Spin them thoroughly
after washing using the appropriate
spin speed.
– For garments made from very fine
weave fibres, such as shirts or
blouses, use the Shirts programme to
avoid creasing. If in doubt, reduce
the load or use the Smoothing
programme.
– For delicates and fabrics with the
following care label r select Low
temperature.
– Starched laundry can be dried in the
tumble dryer. To achieve the usual
finish, double the amount of starch
should be used.
– Use the Automatic programme for
drying mixed loads of cottons and
minimum iron fabrics.
– Open jackets so that they can dry
evenly.
– New dark coloured garments should
be washed and dried separately from
light coloured garments to avoid the
danger of colours running and
discolouring other garments or even
plastic components in the machine.
Dark coloured fibres can also settle
on light coloured garments and vice
versa.
– Woollens and wool blends tend to
become matted and shrink if dried in
a tumble dryer. They can, however,
be partially dried using the Woollens
handcare programme.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
Brief instructions
C Load the tumble dryer
The headings numbered (A, B, C ...)
show the operating sequence and can
be used as a brief guide to using your
dryer.
^ Press the Door button to open the
door.
^ Load the laundry loosely into the
drum.
A Sort the laundry
Do not overload the drum. See the
"Programme chart" for recommended
loads for each programme.
To ensure an even drying result
separate out the washed laundry and
sort it according to:
Overloading can cause unnecessary
wear and tear to the laundry and
give a disappointing drying result.
. . . the drying level required
. . . the type of fibre or weave
. . . size
. . . the moisture content after spinning.
^ Before closing the door make sure
the fluff filter is correctly positioned.
,Make sure that objects e.g.
detergent dispensing balls have
been removed from the laundry.
They could melt, and cause damage
to the dryer or the laundry.
– Check seams and stitching to ensure
that padding and linings are intact.
– Fasten duvet covers and pillow cases
to prevent small items from being
trapped inside them.
– Fasten hooks and eyes etc.
– Tie fabric belts and apron strings.
– Sew in or remove underwiring from
bras.
Check the laundry is right inside the
drum so that it cannot get trapped or
damaged when the door is shut.
B Turn on the tumble dryer
^ Switch the dryer on by pressing the
I-On/0-Off button in.
^ Shut the door either with a gentle
swing, or lean against it and push it
shut.
The tumble dryer may be switched on
after loading, saving energy as the light
will not come on.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
D Select a programme
You cannot alter the drying level of the
Smoothing, Woollens handcare and
Silks handcare programmes.
Cool air, Warm air and Timed drying
hygiene programmes
Warm air
Duration: 0:15 h
Decrease
Increase
^ Press the Menu buttons under
Increase or Decrease to lengthen or
shorten the duration of the timed
drying programmes.
^ Turn the programme selector to the
programme you want.
– You can select a programme duration
of:
The programme name will appear in the
display.
15 minutes to 2 hours for the Warm
air and Cool air programmes
and 1 to 2 hours for the Timed drying
hygiene programme.
Programmes with drying levels:
Cottons, Minimum iron, Delicates,
Automatic, Shirts, Denim,
Sportswear and Outerwear
Further programme
Cottons
Further programmes
Duration:
1:52 h
Outerwear
^ ^ ^ ^ ^ ^
Extra dry
Continue
OK
^ Press the left or right hand Menu
button reapeatedly until the drying
level you want appears in the display.
^ Press the left hand Menu button
under Continue repeatedly until the
programme you want appears.
Any of the drying levels can be
selected for the Cottons programme. A
more limited range is available when
using other programmes.
^ Confirm your selection of the
programme by pressing the right
hand Menu button under OK.
– You can select the drying level for the
Sportswear and Outerwear
Important: Please note that the
programme duration shown in the
display will vary according to the
programme selected (see "Programme
duration / Estimated time remaining").
programmes, as described in "Select
a drying level".
– You cannot alter the drying level of
the Pillows, Proofing and Minimum
iron hygiene programmes.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
How to dry correctly
E Select any Extra options / Delay
start
Before the end of a programme
There is a cooling down phase at the
end of the drying sequence: Cooling
down will appear in the display. The
programme will not finish until the
cooling down phase has been
completed.
There is no cooling down phase at the
end of the Woollens handcare, Silks
handcare and Smoothing programmes.
G Remove the laundry when the
programme has finished
Anti-crease (if selected) and Finished
will appear in the display to indicate
that the programme has finished. The
buzzer (if selected) will sound at
intervals.
^ Select any extra options or delay start
by pressing the appropriate button
(see "Extra options" and "Delay start"
for more details).
^ Press the Door button to open the
drum door.
F Start the programme
The indicator light for the Start/Stop
button will flash when a programme is
being selected. The flashing indicates
that a programme can be started.
^ Remove the laundry.
Check that all items have been
removed from the drum. If items are
left in the dryer, they could be
damaged by overdrying when the
dryer is next used.
^ Press the Start/Stop button.
The indicator light for the Start/Stop
button will now light up constantly.
Drying will appear in the display and
the time remaining will start counting
down.
If the dryer is switched on at the mains
and the door is opened, the drum
lighting will come on. It will go out a few
minutes later to save energy.
With programmes with drying levels,
e.g. Machine iron, Hand iron etc. the
drying level reached will be shown in
the display later on.
^ Switch the dryer off by pressing the
l-On/0-Off button.
^ Clean the fluff filters.
^ Close the door.
^ Empty the condensed water
container (unless the dryer has been
connected for external drainage).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Extra options
Short
For drying fabrics which can
withstand higher temperatures and
have q on the care label. Do not use
on minimum iron or delicate fabrics.
– The programme duration is shorter.
Anti-crease
Helps prevent creasing, if laundry is
not normally removed immediately
after the end of a programme.
^ Each press of the top button selects
the Extra option - indicator light on
(and deselects the previous option)
or no option is selected.
– The drum will turn at intervals for up
to an hour.
– It is not possible to select the Short
and Low temperature options at the
same time.
Buzzer
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
– Not all the extra options are suitable
for use with every programme.
– You can change the volume of the
Low temperature
buzzer. See "Settings J".
For drying delicates and fabrics with
the r symbol on the care label at a
lower temperature.
– The buzzer will always sound when
there is a fault, even if it has been
switched off.
– For all delicate or minimum iron
fabrics with the r symbol on the
care label (e.g. acrylic garments).
– The programme duration is longer.
– On some programmes Low
temperature is a standard part of the
programme and so cannot be
deselected.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Delay start
With delay start you can choose when
you want the programme to end. The
start of a programme can be delayed
from 30 minutes up to a maximum of 24
hours, allowing you to make use of
night-time economy electricity rates, for
example.
Cottons
Start in:
1:01 h
Normal
The delay start time will now count
down in minutes until the start of the
programme.
To select delay start
ASelect the programme you want and
then press the m button.
The drum will turn briefly every hour to
help prevent creasing.
The indicator light for the m button will
light up.
To add laundry after the delay start
time has started counting down
^ Open the door and add the laundry.
Delay start
From: 10:00
Change
10:00
to: 11:29
Back A
^ Close the door and press the
Start/Stop button.
The delay start time will continue to
count down.
The display shows the start time (From),
the time for the end of the programme
(to) and the current time of day.
To alter delay start
^ It is possible to change the drying
level after the delay start time has
begun to count down by pressing
one of the Menu buttons.
Delay start
From: 11:01
Change
10:00
to: 12:30
OK
You can also select a later programme
end time once the delay start time has
begun to count down if you wish:
BUse the left hand Menu button under
Change to select the time you want
the programme to end at.
^ Press the m button.
^ Use the left hand Menu button under
Change to alter the time you want the
programme to end at.
The first press on the button will adjust
the programme end time to the next half
or full hour. Each subsequent press on
the button will delay the programme
end time by 30 minutes.
^ Confirm by pressing the right hand
Menu button under OK.
To cancel delay start
CConfirm the time you require by
pressing the right hand Menu button
under OK.
^ Press the m button.
^ Confirm by pressing the right hand
Menu button under Delete.
To begin delay start
^ To start the programme: Press the
Start/Stop button.
DPress the Start/Stop button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Cottons
Max. load: 6 kg*
Extra dry, Normal+, Normal**
Fabric type
Single and multi-layered cotton fabrics such as towelling,
jerseywear, T-shirts, underwear.
Note
– Select Extra dry for multi-layered and very thick fabrics.
– Do not use Extra dry for jersey fabrics (e.g. T-shirts, underwear),
as they have a tendency to shrink.
Extra options Low temperature (select this option for delicate fabrics with the r
symbol on the care label), Short, Anti-crease
Hand iron r, Hand iron rr**, Machine iron
Fabric type
Cottons or linen fabrics, e.g.: table linen, bed linen, starched
laundry.
Note
To prevent laundry from drying out, it should be rolled up until you
are ready for ironing.
Extra options Low temperature (select this option for delicate fabrics with the r
symbol on the care label), Short, Anti-crease
Minimum iron
Max. load: 3 kg*
Normal+, Normal**, Hand iron r
Fabric type
Minimum iron items made of cotton, synthetic or blended fabrics,
e.g.: shirts, blouses, skirts and table cloths.
Extra options Low temperature (select this option for delicate fabrics with the r
symbol on the care label), Short, Anti-crease
* Weight of dry laundry
** Note for test institutes:
Use this programme without selecting any Extra options for testing according to
EN 61121 standard.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Delicates
Max. load: 2 kg*
Normal+, Normal, Hand iron r, Hand iron rr, Machine iron
Fabric type Delicate items made of cotton, synthetic or blended fabrics, e.g.:
jumpers, skirts, trousers, table cloths, shirts, blouses and evening
wear with sequins and beading.
Note
Extra options Low temperature. (Low temperature cannot be deselected),
Anti-crease
Laundry remains relatively crease-free for easier ironing.
Woollens handcare
Max. load: 2 kg*
Fabric type Woollen fabrics
Note
– This programme only fluffs up woollen garments. They are not
dried completely by this programme.
– Remove garments as soon as the programme has finished and
leave to finish drying at room temperature.
Extra option Low temperature. (Low temperature cannot be deselected).
Automatic
Max. load: 3.5 kg*
Normal+, Normal, Hand iron r
Fabric type Mixed loads of garments suitable for the Cottons and Minimum
iron programmes. Sort according to colour.
Extra option Anti-crease
Shirts
Max. load: 2 kg*
Normal, Hand iron r
Garment
Shirts and blouses.
Extra options Low temperature. (Low temperature cannot be deselected),
Anti-crease
Smoothing
Max. load: 3 kg*
Fabric type – Cotton and linen fabrics.
– Minimum iron items made of mixed fibres, cottons or synthetics,
e.g.: trousers, jackets, shirts.
Notes
– Smooths out creasing caused during the spin cycle in the
washing machine.
– Fabrics are not completely dried in this programme. Remove
garments as soon as the programme has finished and leave to
finish drying at room temperature.
Extra options Low temperature. (Low temperature cannot be deselected),
Anti-crease
Weight of dry laundry
*
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Denim
Max. load: 3 kg*
Normal, Hand iron r
Fabric type Denim garments, e.g. jeans, jackets, skirts, shirts.
Extra
Low temperature. (Low temperature cannot be deselected),
Anti-crease
options
Cool air
Max. load: 6 kg*
Fabric type Any item which only needs airing.
Extra option Anti-crease
Warm air
Max. load: 6 kg*
Fabric type – "Voluminous" and multi-layered fabrics whose layers have
different drying characteristics, e.g. jackets.
– For drying individual items, e.g. bath towels, bathing costumes,
tea-towels and small loads.
Note
Tip
– Do not select the longest drying time to start with. Check the
items as you are drying them to find the optimum time.
You can use the Warm air programme to help remove odours from
cotton clothing which has been worn but it still clean (select a
duration of between 1/2 and 1 hour). Items must be suitable for
drying in a tumble dryer. Dampen the garments a little beforehand
or add a fabric conditioner sheet. The Warm air programme will not
be as effective at removing odours from any parts of the garments
which are made of synthetic fibres.
Extra
Low temperature (select this option for delicate fabrics with the r
options
symbol on the care label), Anti-crease.
Standard pillows - Normal (drying level)
Large pillows - Normal (drying level)
1-2 pillows up to
40 x 40 cm
1 pillow up to 80
x 80 cm
Item
Note
Pillows suitable for drying in a tumble dryer, with feather, down or
synthetic fillings.
Please observe the instructions on the care label. Pillows can still
feel damp after being dried. You can use this programme several
times until the pillow feels dry.
Extra option Anti-crease
Weight of dry laundry
*
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Silks handcare
Max. load: 1 kg*
Fabric type Silks, e.g. blouses and shirts.
Notes
– Smooths out creasing.
– Fabrics are not completely dried in this programme. Remove
garments as soon as the programme has finished and leave to
finish drying at room temperature.
Extra
Low temperature. (Low temperature cannot be deselected),
Anti-crease
options
Sportswear
Max. load: 2 kg*
Normal+, Normal, Hand iron r
Garment
Sportswear which is suitable for drying in a tumble dryer.
Extra option Anti-crease
Outerwear
Max. load: 2 kg*
Normal, Hand iron r
Garment
Outerwear which is suitable for drying in a tumble dryer.
Extra option Anti-crease
Proofing - Normal (drying level)
Max. load: 2 kg*
Item
For drying microfibre fabrics, ski wear, fine, closeweave cotton
garments (poplin) or tablecloths which are suitable for drying in a
tumble dryer and have been treated to provide a water and dirt
resistant finish.
Notes
– This programme includes a proofing fixing phase.
– Only use proofing agents which are stated by the
manufacturer as being "suitable for use on membrane
textiles" as these contain fluorochemical compounds.
– Do not dry items which have been treated with proofing
agents containing paraffin. Fire hazard!
Extra option Anti-crease
Weight of dry laundry
*
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Programme chart
Hygiene programmes
In the Hygiene programmes the temperature is held constant for a longer period
of time to deactivate micro-organisms, e.g. germs or house dustmites and also
reduce the number of allergens in the laundry.
These programmes should not be interrupted as this would prevent the
micro-organisms from being deactivated.
Extra option Anti-crease
Cottons hygiene - Normal (drying level)
Max. load: 6 kg*
Fabric type Cottons and linen fabrics, which will be in direct contact with the
skin, e.g. underwear, nappies, towelling, bed linen, pillow and
mattress covers.
Note
Only for drying fabrics which can withstand higher temperatures
and which have the q symbol on the care label.
Minimum iron hygiene - Normal (drying level)
Fabric type Minimum iron items made of synthetic or blended fabrics, e.g.
skirts, shirts and blouses.
Max. load: 3 kg*
Note
Only for drying fabrics which can withstand higher temperatures
and which have the q symbol on the care label.
Timed drying hygiene
Max load:
depending on
fabric type
Fabric type – 6 kg* of items made of cotton or linen fabric.
– 3 kg* of minimum iron items made of synthetic or blended
fabric.
– For airing individual items of laundry which are already dry or for
deactivating lice, dustmites and micro-organisms in washable
materials which are suitable for drying in a tumble dryer, e.g.
stuffed toys, and which have the q symbol on the care label.
*
Weight of dry laundry
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the programme sequence
Once a programme has started Note: A programme can also be
interrupted by turning the programme
- changing the programme
selector to Stop.
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
- cancelling the programme and then
removing the laundry
^ Proceed as described in "Adding or
removing laundry after a programme
has started" below.
If an attempt is made to change a
selection: Option not possible will
appear in the display.
^ Switch the dryer off after closing the
door.
It is still possible to select or deselect
the Buzzer and the Anti-crease extra
option.
Adding or removing laundry
after a programme has started
You will need to cancel the current
programme before you can select a
new one.
^ Press the Door button.
^ Open the door.
- cancelling the programme and then
selecting a different programme
,Danger of burning:
Do not touch the back of the drum
when adding or removing items. The
drum and the items can get very hot.
^ Press the Start/Stop button.
The "Stopped" option Cancel
programme will appear in the display.
^ Add or remove items as required.
^ Close the door.
^ Confirm by pressing the right hand
Menu button under OK.
^ Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
If you press the Start/Stop button
during the cooling down phase and
confirm by pressing the right hand
Menu button under OK, Finished will
appear in the display.
^ Switch the dryer off.
^ Switch the dryer on.
^ Select another programme and start
it.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Emptying the condensed water
container
The condensed water will be collected
in the condensed water container
unless the appliance has been set up
to drain via thedrain hose (see
installation).
Empty the condensed water
container after every drying
programme.
The drying programme will be
interrupted if the maximum level of the
condensed water container is reached.
A message will appear in the display.
^ Open the shutter and empty out the
water.
^ To replace the container, hold it at a
slight angle (as when removing it)
and push it in gently until you feel it
click into position.
^ To remove the message from the
display, switch the dryer off and then
on again.
Condensed water should not be
consumed. It could lead to health
problems for people and animals.
Condensed water can be put to
household use (e.g. used in a steam
iron or humidifier). To ensure that any
residual particles of fluff in the
condensed water are removed before
use, pass it through a fine sieve or
paper filter first.
^ Holding the container firmly in both
hands, as shown, pull it out slightly
towards the right-hand side.
^ Hold the container in a horizontal
position when carrying it.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the fluff filters
^ Use your fingers to remove the fluff
from the surface of the filter.
The fluff which is created by the drying
process is collected by the fluff filters in ^ Remove any fluff from the hollow part
the door and the door opening. Clean
the filters after each drying
programme*.
of the door opening. You could also
use a cleaning brush which is
available as an optional extra from
your Miele dealer or the Miele Spare
Parts Department, or use a vacuum
cleaner.
Cleaning them whilst dry
Tip: You can also use a vacuum cleaner
to remove the fluff.
^ Also clean the door seal (2) with a
damp cloth.
^ Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^ Open the door and pull the fluff filter
(1) out of the door as illustrated.
^ Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^ Close the door.
* Always check the fluff filters if the
Clean out airways message appears.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning them with water
,Do not replace them if they are
damp or wet. Damp or wet filters
could cause operational faults.
If there is a great deal of compacted
fluff on any of the filters, they can be
removed and cleaned under hot
running water.
^ Push the large filter back into the
door holder until it clicks into position.
Ensure it is facing the correct way.
^ Open the door and pull the fluff filter
out of the door as described
previously.
^ Replace the filters in the door
opening by first inserting them at the
bottom and then pressing them into
place at the top.
The two filters in the door opening can
also be removed if you need to clean
them with water.
^ Lock both dials.
^ Turn dial a and pull the filter by the
dial out of the door opening as shown
b. Do the same on the other side.
^ Rinse all the filters under hot, running
water.
^ Then shake the filters until no more
water droplets are visible.
^ Dry the filters thoroughly with care.
^ Clean the area underneath these
filters, e.g. with a vacuum cleaner.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the tumble dryer
Disconnect the tumble dryer from
the mains electricity supply.
Miele branded cleaning and
conditioning products are available to
order from your Dealer, the Miele Spare
Parts Department or via the internet on
^ Clean the housing and control panel
with a slightly damp cloth and a mild
detergent or soapy water.
^ The drum and other stainless steel
parts can be cleaned with a suitable
propietary stainless steel cleaner
following the manufacturer's
instructions.
Do not use solvents, abrasive
cleaners, glass cleaners or
all-purpose cleaners. These could
damage plastic sufaces and other
parts. The tumble dryer must never
be hosed down.
^ Dry all parts with a soft cloth.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Cleaning the condenser unit
Detergent residue, hair and fine fluff
from the dryer can get through the fluff
filters and block the condenser unit.
Dust from the room in which the dryer is
installed can also get into the
condenser unit and cause a blockage.
Check the condenser unit at least
twice a year. Always check it if the
Clean out airways message appears.
If the dryer is used frequently then
check the condenser unit after
approx. 100 drying cycles. Clean it if
necessary.
^ Turn the lever on the inner cover
downwards to the vertical position.
^ Tilt the cover forwards.
Removing the condenser unit
^ Remove it by pulling it diagonally
upwards.
^ Turn the lever on the condenser unit
upwards to the vertical position.
^ Open the service panel. Hold the
panel securely when doing this.
^ Now remove the panel by pulling it
diagonally upwards and place it to
one side.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
If you cannot see any fluff:
^ Replace the condenser unit (see
following page).
If you can see some fluff:
^ Clean the condenser unit as
described below.
Cleaning the condenser unit
^ When rinsing the condenser unit,
make sure you position it as
shown in the next two illustrations.
^ Pull the condenser unit out of its
housing by the handle.
Checking the condenser unit
^ Use a shower head or similar to rinse
the unit out as shown.
^ Hold the condenser unit up to the
light as shown.
^ Check to see if there is any fluff inside
it.
The arrows in the illustration above
indicate where to look.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and care
Replacing the condenser unit
^ With the handle facing upwards, push
the condenser unit back into position
in its housing.
^ Turn the lever down to the horizontal
position, making sure that the hook
on the lever clicks into the groove.
When replacing the inner cover after
cleaning, ensure that the rubber seal
fits correctly into the groove.
^ Replace the inner cover making sure
the hooks locate correctly. Hold it at
an angle and push it gently
downwards.
^ Then flush the unit through from the
front.
^ Check the condenser unit again for
any visible fluff and if necessary flush
it through again until it has all gone.
^ Then turn the lever upwards into the
horizontal position to lock the cover.
^ Replace the service panel and press
the upper edge until it clicks into
position.
^ Remove any soiling still visible inside
the housing unit by hand using a
damp cloth. Do not try and access
areas you cannot reach by hand!
,It is important to ensure that both
the condenser unit and the cover are
correctly positioned and locked
otherwise water may leak from the
dryer.
^ Also make sure the rubber seals are
clean.
The rubber seals must not be
removed and must be free of kinks.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
With the help of the following notes, minor faults in the performance of the
machine, some of which may result from incorrect operation, can be put right
without contacting the Service Department.
,Repair work to electrical appliances should only be carried out by a suitably
qualified person in strict accordance with current local and national safety
regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Fault messages in the display
Problem
Possible cause
Remedy
l
This is not a fault.
Use the Warm air
programme (timed
drying) to dry individual
items.
Adjust the load
The electronic unit has
recognised that there is
no laundry in the drum
and cancelled the
programme.
+ the programme is
cancelled, the buzzer
sounds
To delete the fault
message:
Drying individual
– Open the door.
garments or items which
are already dry can also
cause the programme to
be cancelled.
q
Please empty
The condensed water
container is full or the
drain hose has a kink in it
or is blocked.
– Empty out the
condensed water
container or check the
drain hose.
the container
+ the cooling down
phase starts, the buzzer
sounds
To delete the fault
message:
– Switch the dryer off and
then back on again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
Clean out airways
– The dryer is not working
efficiently or economically.
– Cleaning the filters is
usually all that is required.
However, if the message
does not go out after you
have cleaned the filters,
then also check all the
possible causes described
under "The drying process
goes on too long or even
switches off".
appears after the
programme has
finished
Possible cause: The fluff
filters are clogged with fluff
or with detergent residues.
– This message can also
appear when using the
Large pillows programme
to dry a large pillow. The
message does not indicate To delete the fault
a fault in this instance.
message:
– Open the door.
– Switch the dryer off and
then back on again.
You can adjust the setting
which controls when or if the
message Clean out airways
appears. See "Settings
menu J, Airways indicator").
W
See above for possible
To delete the fault
message:
Clean out airways
causes and their remedies.
+ the programme
is cancelled, the
buzzer sounds
– Open the door.
– Switch the dryer off and
then back on again.
– Then start the programme
again.
– If the fault message
appears again, contact the
Miele Service Dept.
,
There is a fault.
– Switch the dryer off and
then back on again. Try to
start a programme.
Technical fault
Call the Service
Department
A fault code, e.g. F51 also
appears.
– If the fault message
appears again, contact the
Miele Service Dept.
+ the programme
is cancelled, the
buzzer sounds
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Other problems
Problem
Possible cause
Remedy
The drying
Please check all the possible causes and switch the dryer
process goes off and then back on again.
on too long or
Ventilation to and from the dryer Open a door or window while
may be insufficient (e.g. the machine is in operation for
even switches
off.
because it is installed in a small increased air flow.
room). This has caused the
temperature in the room to rise
sharply.
In some
circumstances,
Clean out
airways still
appears, even
though the
filters are
The fluff filters are clogged up
with fluff or were still wet when
they were replaced.
– Remove any fluff.
– The fluff filters must be
completely dry.
The laundry has not been spun Make sure that your laundry is
clean.
sufficiently.
thoroughly spun at the
appropriate spin speed.
The tumble dryer has been
overloaded.
Do not exceed the maximum
load for the programme
selected.
Metallic components, e.g. zips – Open zips next time.
have prevented the dryer from
If the problem occurs again,
registering the correct moisture
dry garments with long zips
level in the laundry.
using the Warm air
programme (timed drying).
Detergent residues, hair and
fine fibres can block up the
condenser unit.
Check the condenser unit
from time to time and clean it
if necessary.
The vents below the door are
blocked.
Remove any objects that are
blocking the vents.
The laundry is The load consisted of different – Finish drying using the
not sufficiently fabrics.
dry.
Warm air programme.
– Select a different
programme next time.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
Water leaks from the
machine after the
condenser unit has
been cleaned.
– The inner cover of the – Ensure that the
condenser unit has not
been locked properly
and/or the condenser
unit has not been
condenser unit is
positioned correctly
and lock the inner
cover.
positioned correctly.
– Check the rubber
seals.
– Fluff has collected in
the condenser unit
housing.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
Items made of synthetic Synthetic fibres tend to
fibres are charged with attract static charge.
static electricity after
Static charge can be
reduced by adding a
fabric conditioner to the
final rinse in the washing
programme or a fabric
conditioner sheet to the
load when drying.
drying.
There is a build-up of
fluff.
Fluff is principally the
result of friction when
Fluff is collected by the
fluff filters and can be
garments are being worn easily removed (see
and washed. Machine
drying hardly causes any
fluff to form and has been
established by research
institutes to have no
"Cleaning and Care").
appreciable effect on the
lifetime of fabric.
Feather filled pillows
smell after drying.
Feathers are a natural
The smell will dissipate
product and this is quite after sufficient airing.
normal.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Problem
Possible cause
Remedy
The programme does
not start and the display
is dark.
No obvious cause.
– Is the dryer switched
on?
– Is the plug correctly
inserted into the socket
and switched on?
– Is the door closed
properly?
– Has the fuse or circuit
breaker tripped?
The interior drum
The lighting switches off
Switch the dryer off and
then on again.
lighting does not come automatically (to save
on.
energy).
The lamp needs
changing.
Change the lamp as
described at the end of
this section.
The display is in a
different language.
A different language has Set the language you
been selected.
want. The flag symbol J
will guide you. See
Language J at the end of
this booklet.
The Start/Stop button
indicator light flashes
when a programme is
being selected.
This is not a fault.
After the programme has
started, the flashing will
change to a constant
light.
The flashing indicates that
a programme can be
started.
The display is dark.
The display and
The display and the
programme selector
programme selector will
The programme selector
is not lit up.
lighting have switched off light up when one of the
automatically to save
buttons is pressed.
The Start/Stop button
indicator light flashes
slowly.
energy (Standby mode).
If the problem persists,
there is a fault.
Contact the Miele Service
Department.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem solving guide
Changing the lamp
The lamp specification and
Disconnect the tumble dryer from
the mains electricity supply.
maximum wattage is stated on the
data plate and on the lamp cover.
^ Open the door.
^ Replace the lamp.
You will find the interior lamp cover at
the top of the drum aperture.
^ To close the cover push it upwards
and press it on the left and right until
you hear it click into position.
,Ensure that it is fitted into
position securely, as any moisture
could cause a short circuit.
^ Insert a suitable tool, such as a wide
bladed screwdriver, under the side
edge of the lamp cover as illustrated.
^ Apply a little pressure and whilst
doing so turn your wrist in the
direction of the arrow to open the
cover.
The cover will open downwards.
The temperature resistant lamp should
only be ordered from your Miele Dealer
or the Miele Spare Parts Department.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
After Sales service
In the event of any faults which you
Future updates (PC)
cannot remedy yourself, please contact
The indicator or check light marked PC
on the fascia panel is the interface used
by the Miele service technicians during
service work for testing purposes and
for updating the appliance's
– your Miele dealer or
– the Miele Service Department (see
back cover for contact details).
N.B. A call-out charge will be applied
for unnecessary service visits where the
problem could have been rectified by
the customer as described in this
instruction manual.
programme data.
Appliance guarantee
Please see the guarantee card supplied
with your appliance.
When contacting your dealer or the
Service Department, please quote the
model and serial number of your
appliance, both of which are shown on
the data plate situated on the right hand
side below the drum aperture.
Optional accessories
Optional accessories for this dryer are
available from your Miele Dealer, the
Miele Spare Parts Department or via the
Please note that telephone calls may
be monitored and recorded for
training purposes.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Front view
aMains connection cable
bCondensed water container
cControl panel
eService panel for condenser unit
fFour height-adjustable screw feet
gExternal drainage options (e.g. via
wash basin, wash basin drain outlet,
or gully).
dDoor
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Rear view
Building under a continous worktop /
in a kitchen run
,A building-under kit* with a
coverplate to replace the appliance
lid is required. It must be fitted by a
suitably qualified person to ensure
electrical safety.
N.B. If you wish to push your appliance
under a worktop and there is space to
do this without removing the lid the
building under kit is not necessary.
Otherwise the building under kit is
essential.
aProtruding lid for holding when
moving the appliance (see arrows)
– The building-under kit is supplied
with its own installation instructions.
bAir inlet vent for cooling the
condenser unit
– N.B. When built under drying times
may be longer.
cMains connection cable
– The electrical socket must be located
in an accessible position near the
tumble dryer.
dExternal drainage of the condensed
water
With niche heights of:
eAccessories for connection to a sink
drain outlet
– 830-840 mm, longer screw feet* are
required.
Installation site
– 870-885 / 915-930 mm, one or two
raising kits* are required.
,Make sure the dryer door can be
opened without hindrance after
installation.
* accessory available to order.
Replacing the lid
Transporting the tumble dryer to its
installation site
If the lid has been removed in order to
fit a coverplate, ensure that, if the lid is
ever replaced, it fits securely into the
rear holders. Otherwise, it is not
When moving the appliance, you can
hold it by the lid where it protrudes to
the rear of the dryer. To manoeuvre the
dryer out of its packing case to its
installation site you will also need to
hold it by the front feet. Do not lift the
appliance by the drum door.
properly secure for transport.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Levelling the tumble dryer
Room in which the dryer is located
Air taken in for use in the drying
process will be warm when it is
expelled from the front of the dryer. This
expelled air heats up the air in the
room. It is therefore very important to
ensure that the room is adequately
ventilated, particularly if the dryer is
located in a small room. Otherwise
running times and energy consumption
could be increased.
Washer-dryer stack
The tumble dryer can also be
combined with a Miele washing
machine in a washer-dryer stack. The
appropriate "WTV" stacking kit
(available to order) to match your dryer
is required.
The appliance must be perfectly level to
ensure safe and proper operation.
,Stacking kits must only be
installed by a suitably qualified fitter.
Before moving the tumble dryer
again (e.g. when moving house)
After each use a small quantity of
condensed water will collect in the area
around the pump. This water can run
out if the tumble dryer is tipped up
when it is being moved. It is a good
idea to run the Cool air programme for
approximately 1 minute before moving
the tumble dryer. Any remaining
^ The screw feet can be adjusted to
compensate for any unevenness in
the floor.
condensed water will then be fed into
the condensed water container or out
through the drain hose.
,The air inlet and outlet vents on
the front of the tumble dryer must not
be covered as this would prevent
sufficient ventilation for cooling the
condenser unit.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External condensed water
outlet
^ There will be a small amount of
residual water in the drain hose.
Have a container ready to collect this.
General notes
When drying is in progress, condensed
water is pumped into the condensed
water container through the drain hose at
the back of the dryer. The condensed
water can also be drained off directly if
the tumble dryer is installed near a sink,
drain outlet etc. so that the condensed
water container does not have to be
emptied.
Drain hose length . . . . . . . . . . . . 1.50 m
Maximum delivery head . . . . . . . 1.50 m
Maximum drain hose length . . . . 4.00 m
^ Pull the hose off its connection (see
arrow).
^ Allow any residual water to run into
the container.
,If the on-site water drainage
system is not fitted with a non-return
valve or an appropriate air gap, one
must be fitted to prevent the risk of
back-flow. (See "Installation conditions
requiring a non-return valve").
^ Unwind the hose and pull it carefully
out of the holders.
The following optional accessories are
available:
– an extension hose
– a non-return valve kit for connection
to an external condensed water outlet
(includes an extension hose).
Maximum delivery head with
non-return valve fitted: 1.00 m
Arranging the drain hose
^ Position the hose to the right or left
hand side as necessary.
,Do not pull on the drain hose and
do not stretch it or allow it to become
kinked as it could get damaged.
Leave the hose in the middle holder to
prevent it from becoming kinked
inadvertently.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
External drainage via a sink or gully
Example: Connection to a sink drain
outlet
^ See "Front view" illustration.
The drain hose with non-return valve
fitted can be connected directly to a
suitable sink drain outlet.
,If you want to drain the water off
into a sink you will need to secure
the hose carefully, e.g. by tying it to a
tap to make sure it cannot slip
during use. Otherwise there is a risk
of overflowing water which could
cause damage.
^ Use the bow-shaped guide to prevent
the drain hose from becoming
kinked.
Installation conditions requiring a
non-return valve
,Certain installation conditions
require the fitting of a non-return
valve (available as an optional
accessory). A non-return valve will
prevent the risk of back-flow out of
the dryer which could cause
damage.
^ Remove the following from the back
of the dryer at the top:
Adapter 1 and hose clip 3 behind it.
A non-return valve is required:
– If the tumble dryer is connected to a
sink drain outlet (see the following
section).
– If the tumble dryer is connected to a
drainage system already in use by
another appliance, e.g. a dishwasher
or washing machine.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
^ Fit adapter 1 to the sink drain outlet
using nut 2.
If this nut has a flat disc in it you
should take the disc out first.
^ Attach the end of the hose 4 to
adapter 1.
^ Use a screwdriver to tighten hose clip
3 up close to the nut.
,Non-return valve 5 has to be
fitted with the arrow pointing in the
direction of flow (i.e. towards the
sink). Otherwise water will not drain
out of the appliance.
1 Adapter
^ Fit non-return valve 5 to the tumble
dryer drain hose 6 (make sure it is
fitted in the correct direction (see
arrow on non-return valve).
2 Nut
3 Hose clip
4 End of the hose
5 Non-return valve
6 Tumble dryer drain hose
^ Secure the non-return valve using
hose clips.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrical connection
Electrical connection U.K.
Non-rewireable plugs BS 1363
All electrical work should be carried out The fuse cover must be refitted when
by a suitably qualified and competent
person, in strict accordance with
current national and local safety
regulations (BS 7671 in the UK).
changing the fuse, and if the fuse cover
is lost, the plug must not be used until a
suitable replacement is obtained. The
colour of the correct replacement cover
is that of the coloured insert in the base
of the plug, or the colour that is
Ensure power is not supplied to the
appliance until after installation work
has been carried out.
embossed in words on the base of the
plug (as applicable to the design of
plug fitted).
The appliance is supplied with a mains
cable with moulded plug ready for
connection to a 230-240V mains supply.
Please ensure the connection data
quoted on the data plate match the
household mains supply.
Replacement fuses should be ASTA
approved to BS 1362 and have the
correct rating. Replacement fuses and
fuse covers may be purchased from
your local electrical supplier.
Connection should be made via a
suitable switched socket which is easily
accessible after installation.
WARNING: THIS APPLIANCE
MUST BE EARTHED
For extra safety it is advisable to install
a suitable residual current device
(RCD). Contact a qualified electrician
for advice.
Do not connect via an extension lead.
Extension leads do not guarantee the
required safety of the appliance (e.g.
danger of overheating).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumption data
Programme
Load
Final spin speed
Energy Duration
in a domestic washing machine
kg*
6.0
rpm
kWh
Minutes
Cottons
Normal
1000 (60 % residual moisture)**
3.30
3.00
2.85
2,55
2.50
89
81
78
70
69
1200
1400
1600
1800
Cottons
6.0
1000 (60 % residual moisture)**
2.65
2.35
2.20
1,85
1.80
71
63
60
52
51
Hand iron rr
1200
1400
1600
1800
Minimum iron Normal
Minimum iron Hand iron
Delicates Normal
Automatic Normal
Shirts Normal
3.0
3.0
2.0
3.5
2.0
3.0
2.0
1.0
1200 (40 % residual moisture)**
1.20
1.00
1.40
2.10
1.15
2.00
0.15
0.15
0.30
1.45
1.95
1.55
3.70
1.45
2.75
37
32
95
85
41
96
4
1200
800
800
600
Denim Normal
900
Woollens handcare
Silks handcare
1000
400
5
Smoothing
3.0
2.0
2.0
2.0
6.0
3.0
1.2
1000
600
8
Sportswear Normal
Outerwear Normal
Proofing
65
105
72
118
58
198
800
800
Cottons hygiene
Minimum iron hygiene
Large pillows
1000
1200
1200
*
Weight of dry laundry
** EN 61121:2005 test programme
All data without a "star" against it was calculated using EN 61121:2005.
Before testing in accordance with EN 61121, dry a 3 kg load of cotton laundry with 70% residual
moisture as per the above standard using the Cottons Normal programme without any extra options.
Consumption data can vary from the nominal values given above depending on the size of the
load, types of textiles, residual moisture levels after spinning, fluctuations in the electricity
supply and any extra options selected.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical data
Height
850 mm
820 mm
595 mm
580 mm
1060 mm
Yes
Height for building under
Width
Depth
Depth with door open
Suitable for pushing under a worktop
Suitable for stacking
Weight
Yes
51 kg
Drum volume
111 litres
6 kg dry weight
Maximum capacity
Capacity of condensed water container approx. 3.5 litres
Drain hose length
Maximum delivery head
Maximum drain hose length
Length of connection cable
Voltage
1.5 m
1.5 m
4 m
2 m
see data plate
see data plate
see data plate / plug
see data plate
see "Consumption data"
see data plate
Connected load
Fuse rating
Lamp wattage
Energy consumption
Test certificates awarded
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
for changing
default settings
The Settings menu is used to alter the
dryer's electronics to suit different
requirements.
Settings can be altered at any time.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
To open the Settings menu
^ Close the door.
Language J
The display can be set to appear in
one of several different languages.
^ Switch the dryer on.
^ Press both menu buttons at the same
time until the following appears in the
display:
^ Select the language you want by
pressing the left hand Menu button
under ~ (Continue).
Settings
A tick L will appear beside the
language to show that it has been set.
Language F
The flag J after the word Language
acts as a guide to prevent a language
which will not be understood from being
set.
Continue
OK
You are now in the Settings menu.
Select the setting you want with the left
hand Menu button under Continue,
and confirm your selection with the right
hand Menu button under OK.
To close the Settings menu
Settings
Back A
Continue
OK
^ Press the right hand Menu button
under OK.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Time (of day)
Drying levels
First select either a 24 hour or 12
hour clock . You can then set the
current time of day.
You can alter the drying levels for the
Cottons and Minimum iron
programmes.
The bar chart shows you the setting.
Factory default: a medium setting.
To set the clock format
Clock format
– rrr (damper)
The programme duration is shorter.
24 h clock B
– r (drier)
The programme duration is longer.
Continue
OK
^ Select the clock format you want with
the left hand Menu button under
Continue, and confirm your selection
with the right hand Menu button
under OK.
Extended cool down
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
To set the time
^ Select the Time sub-menu and use
the Menu buttons to set the time.
The bar chart shows you the setting.
Factory default: 0 mins (normal cooling
down period)
You can select an extended cool down
time in 2 minute increments up to a
maximum of 18 minutes.
You cannot extend the cooling down
time for the Warm air, Cool air, Timed
drying hygiene, Woollens handcare,
Silks handcare or Smoothing
programmes.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Airways indicator
Lock code
Fluff should be removed after drying.
The Clean out airways indicator will
remind you to clean the filters when a
certain amount of fluff has collected.
You can decide at what level of fluff
this reminder should be given.
The lock code prevents your machine
being used without your knowledge.
When the code has been activated, you
have to enter a code after switching the
dryer on. Otherwise the dryer cannot be
operated.
You will have an idea of how often this
should be done after a few drying
programmes.
To activate the lock code
Lock code
Normal
Activate
Factory default
Continue
OK
Light
Clean out airways appears when there
is only a small build-up of fluff
^ Press the right hand Menu button
under OK.
Off
^ The display will now request that a
lock code is entered. The lock code
is 250 and cannot be altered.
Clean out airways does not appear
Heavy
Clean out airways only appears when
there is a heavy build-up of fluff
To enter the lock code
A tick L will appear beside the option
to show that it has been set.
Lock code
0 _ _
-
OK
^ Enter the first number with the left
hand Menu button under -. Confirm
your selection of this number by
pressing the right hand Menu button
under OK. Now enter the second
number.
^ Repeat the process until all three
numbers have been entered.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Confirm lock code
2 5 0
Back A
OK
^ Confirm the lock code by pressing
the right hand Menu button under OK
or, if you have made a mistake, press
the left hand Menu button under
Back A.
The following will appear in the display:
X
Lock code activated.
Entry OK
Once the machine is switched off, it can
only be used again if the lock code is
entered.
To use the dryer when the lock code
is activated
When the machine is switched on
again, the display will request the lock
code.
^ Enter code 250 as described above
and confirm the entry.
The dryer is now unlocked and ready
for use.
To deactivate the lock code
Proceed as for activating the code.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings menu J
Buzzer
There are two options:
On
The buzzer has two volumes.
Standby is activated:
Normal (Factory default)
The buzzer sounds at the end of a
programme.
– if a programme is not selected within
10 minutes of the tumble dryer being
switched on.
Loud
– 10 minutes after a programme has
started.
The buzzer sounds at maximum volume
at the end of a programme.
– 10 minutes after the end of a
programme.
A tick L will appear beside the option
to show that it has been set.
Not in current prog.
(Factory default)
Keypad tone
– Standby is activated if a programme
is not selected within 10 minutes of
the tumble dryer being switched on
and after the end of a programme.
(Standby is not activated after a
programme has started).
An audible tone sounds each time a
button is pressed.
A tick L will appear beside the option
to show that it has been set.
Factory default: Off.
Pressing one of the buttons switches
the display back on again.
Contrast
A tick L will appear beside the option
to show that it has been set.
Brightness
There are ten different display
contrast and display brightness
settings.
Memory
The electronics will memorise the
drying level and any extra options
selected for the current drying
programme.
The bar chart shows you the setting.
Factory default: a medium setting.
Standby display
A tick L will appear beside the option
to show that it has been set.
Factory default: Off.
To save energy, the display goes out
after 10 minutes and the indicator
light for the Start/Stop button will start
flashing slowly.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Alteration rights reserved/2008
M.-Nr. 06 884 700 / 03
Download from Www.Somanuals.com. All Manuals Search And Download.
|