Metz Flat Panel Television Slim TV User Manual

H O M E E N T E R T A I N M E N T

O p e r a t i n g i n s t r u c t i o n s

f o r a l l S L I M - T V s e t s

SLIM-TV

Metz Mondial 82 Slim Metz Bristol 82 Slim

Metz Bristol 72 Slim

Metz Spectral 72 Slim Metz Astral 72 Slim

605 47 2037.A1

Download from Www.Somanuals.com. All Manuals Search And Download.

Metz - always first class.

Contents

21. Setting the Country and Language. . . . . . . 54

22. Setting Stations -

Setting the reception mode . . . . . . . . . . . . 55

22.1 TV-Standard²⁾for analogue stations. . . . . . 56

22.1 Analogue TV. . . . . . . . . . . . . . . . . . . . . . 57

22.1 Colour standard for analogue stations . . . . 58

22.2 Automatic DVB-T station search . . . . . . . . 59

22.2 Manual DVB-T station search . . . . . . . . . . 60

22.3 Automatic DVB-C station search . . . . . . . . 61

22.3 Manual DVB-C station search . . . . . . . . . . 62

23. Station Logo. . . . . . . . . . . . . . . . . . . . . . . 63

24. Sorting Stations . . . . . . . . . . . . . . . . . . . . 64

25. Reg. AV Devices. . . . . . . . . . . . . . . . . . . . 65

25. Reg. AV Devices Data Logic . . . . . . . . . . . 66

25. Reg. AV Devices Setting the signal types. . . 68

25.1 Removing AV Devices. . . . . . . . . . . . . . . . 69

26. Initial Programme Position. . . . . . . . . . . . . 70

27. Sound via HiFi Amplifier HiFi output . . . . . 71

28. Display Configuration. . . . . . . . . . . . . . . . 73

29. DVB Radio Mode . . . . . . . . . . . . . . . . . . . 74

30. Scope of Operation . . . . . . . . . . . . . . . . . 75

31. Operation without the Remote Control . . . . 77

32. Connecting Headphones. . . . . . . . . . . . . . 78

33. Sound 1, Sound 2 . . . . . . . . . . . . . . . . . . 78

34. Cleaning the TV Set . . . . . . . . . . . . . . . . . 78

35. Connections on the Front . . . . . . . . . . . . . 79

35.1 Connections on the Rear of the Set. . . . . . . 80

36. Copying between AV Devices

Direct recording. . . . . . . . . . . . . . . . . . . . 81

37. Setting the Picture Format . . . . . . . . . . . . . 83

38. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . 84

39. Technical Data . . . . . . . . . . . . . . . . . . . . . 88

40. Upgrade Kits . . . . . . . . . . . . . . . . . . . . . . 89

16. Basic differences between

analog terrestrial reception and DVB-T. . . . 90

Problem, Possible cause, Remedy. . . . . . . . 92

Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Download from Www.Somanuals.com. All Manuals Search And Download.

1. Installation

• Take care that no bright artificial light or sunshi-

ne falls directly on the screen. This could cause

reflections which have a negative effect on the

brilliance of the picture.

• The optimum viewing distance is about five

times the screen diagonal dimension. For TV

sets with a 70 cm screen, it is thus about 3.5

metres.

• The antenna cable and any other components

(such as a video recorder) connected between

the antenna socket in the wall and the TV set

must comply with the European standard

EN 60966-2-4.

• There may be no magnetic fields in the immedi-

ate vicinity of the TV set. Keep loudspeaker

boxes well away from the set.

• The antenna cable used for connecting the TV

set must have a screening attenuation of at least

75 dB.

• The use of non-approved cables will invalidate

the operating permission for the TV set.

• For details of how to connect peripheral devices

such as video recorders, DVD players, etc. press

the „INFO“ key to call the help function, select

„Connecting AV devices“ with the cursor and

press „OK“ to display the information.

Download from Www.Somanuals.com. All Manuals Search And Download.

2. Safety notes

• Always place the monitor on a solid,

stable surface.

• Lightning can damage electrical equip-

ment. A lightning flash entering the

power cable or the aerial cable can

damage the TV set even if it is swit-

ched off. You should therefore discon-

nect the power cable and aerial cable

from their outlets or from the TV set in

the case of a thunderstorm.

• If a cold TV set is moved to a warm

room, always allow any condensation

on the screen to evaporate before swit-

ching it on.

• The TV set is intended for use in a dry

room. If, in exceptional circumstances,

you use it outdoors, take care that is

protected against moisture (rain, splas-

hed water, dew).

• The monitor may be opened and

repaired only by a qualified person.

CAUTION! HIGH VOLTAGES CAN KILL !

• TV sets need adequate ventilation.

Never cover the openings on the rear

of the set with curtains, doilies, new-

spapers, etc. Also take care that the

slits in the bottom of the case are freely

accessible so that the intake of the

cooling air is not hindered.

If repairs should be necessary, consult

your local dealer.

• Always switch off the TV set before cle-

aning it.

• Do not hold the remote control directly

in front of your eyes and press a but-

ton. The remote control emits infrared

radiation!

• If you place the TV set in a wall unit,

leave sufficient space on all sides for

the circulation of cooling air.

• Do not place rechargeable batteries in

the battery compartment of the remote

control.

Use only two 1.5 V dry batteries of the

type LR03/AM4/AAA (Micro).

• Do not place the TV set close to a radi-

ator, since this would effect adequate

cooling.

• Do not place

- burning candles or

• The TV set is intended only for the

reception and reproduction of picture

and sound signals.

vessels containing liquids (vases, etc.)

on top of the TV set, since any hot wax

or water dripping into the set could

cause serious damage to the electronic

components and could also jeopardize

the electrical safety of the set.

• The TV set may be operated only from

a mains voltage of 230 VAC,

50/60 Hz.

Australia: 240 VAC.

• Lay the power cable so that nothing

stands on it and no-one can trip over

it.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. The Remote Control

The remote control sends commands to

the TV set by means of an infrared sig-

nal. You must point it towards the TV set

when using it. Note that the remote con-

trol may interfere with the operation of

other devices which use infrared signals

(such as infrared headphones).

ቶ

ባ

ቤ

Sunlight falling directly on the TV set

may interfere with the operation of the

remote control, since the TV set cannot

detect the infrared signals from the

remote control under these conditions.

The TV set must be switched on with the

main power switch before it can be con-

trolled with the remote control.

ᕤ

The most important keys

for normal use

³ ON

ት

ቴ

ᕥ

Switches the TV set on with program-

me position 1 or the programmed

initial programme position selected,

or switches it OFF (to the standby sta-

te).

ቧ

ቨ

ቲ

ᕨ

ᕤ

Numeric keys (direct station selection).

ᕥ P+ /P- Selects the next/previous pro-

ተ

ቯ

ቮ

gramme position.

ᕨ Volume control.

ቪ

ቫ

Setting can be changed in the menu.

ƺ Back to the previously selected

station.

ቭ

Ƽ Displays the station table.

Do not insert rechargeable batteries in

the battery compartment of the remo-

te control.

Use only two dry batteries of the type

LR03/ AM4/AAA 1.5V.

Download from Www.Somanuals.com. All Manuals Search And Download.

3. The Remote Control

Overview of the functions of the keys

ባ Switch to radio mode.

Switch on from the standby state into radio mode¹⁾.

ቤ Function keys:

F1/F2/F3: press briefly to call the functions set in the factory.

F1/F2/F3: press and hold to display a selection of special functions.

AV: press to select one of the previously configured AV devices.

ቧ Cursor control key in the "Information" window and the “TV menu”.

ቨ OK: confirmation key.

ᕨ Volume control; values can be set in the TV menu.

ቪ Exit key: exit from the menu without saving any changes you have made.

ቫ Open the TV menu.

In the menu: back to the main menu.

ቭ Open the electronic programme guide (EPG).

ቮ Open the Teletext window.

ቯ Mute.

ተ Freeze frame.

ƺ Back to the previously selected station.

In the TV menu: open the "Configuration" menu.

ቲ Display the date and time.

In the TV menu: open the "Timer" window.

Ƽ Display the station table.

In the TV menu: open the station table or the station features window.

ቴ Display the sound functions.

In the TV menu: open the "AV devices" window.

ት Display the picture functions.

In the TV menu: open the "picture and sound" window.

ቶ Back to the TV picture.

Switch from radio mode¹⁾to TV mode.

Switch on from standby mode into TV mode.

k Display the AV menu "Replay/record".

Switch on from standby mode into AV mode.

k Display the "Information" window. In the "Information" window:

back to the table of contents.

1) Possible only in DVB mode !

Download from Www.Somanuals.com. All Manuals Search And Download.

4. Daily Operation

Switching on

Switching off

Switch on the TV set with the main

switch.

Press the

key to switch the TV set to

standby mode. If you do not intend to

use the TV set for a longer period, switch

it off with the main power switch.

The TV set is now in standby mode and

the red standby indicator lights.

Adjusting the volume

After about five seconds, the TV set swit-

ches to programme position 1 or to the

programmed initial programme position.

The volume can be adjusted with

the

key.

If you press no further keys on the remo-

te control, a window requesting that you

do so is displayed after about 10 minu-

tes. If you do not do this, the TV set swit-

ches back to the standby state.

Adjusting the picture and sound

settings

Call the picture settings with the blue key

or the sound settings with the yellow

key . The setting box with the various

functions is then displayed at the bottom

left of the screen. Use the rocker key

"P+/P-" to select the desired function

Use the numeric keys to select any des-

ired programme position. Pressing the

key selects programme position 1 or,

if it is programmed, the initial program-

me position (see page 70).

and then use the

setting.

key to adjust the

5. Selecting the Operating Mode

You can switch the TV set between its various ope-

rating modes with the keys "TV", "AV" and "R".

You can also switch from standby mode to the

desired operating mode with these keys.

If you switch on the TV set with one of these keys,

the station in the operating mode selected before

the TV set was switched off is again selected.

TV = TV mode

AV = TV mode with input from AV devices

(e.g. video tape recorder, DVD player, etc.)

= Radio mode ¹⁾

1) Possible only in DVB mode !

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Station Selection

Opening the menu

Station selection and management of

programme positions

The TV set can store the settings for up to 2000 TV

stations and 2000 radio stations in so-called pro-

gramme positions. You can select any of these

programme positions with the numeric keys, with

the oval rocker key "P+/P-" or from the station

table.

If you use the numeric keys for station selection,

the first digit you enter is normally the "thousands"

digit. If less than 1000 programme positions are

occupied, it automatically becomes the "hund-

reds" digit.

If less than ten programme positions are occupied,

the first digit you enter automatically becomes the

"units" digit.

After pressing any numeric key, you have three

seconds to press further numeric keys.

Selecting stations from the station table

In normal TV or radio ¹⁾mode, you can display

the station table by pressing the white

key. In the table which is then dis-

played, you can use the oval rocker key

"P+/P-" or the numeric keys to select the

desired station and then press the "OK"

key to display this station.

10 Kabel 1

Nord 3

RTL

PRO 7

Nord 3

PRO 7

SAT1

Bayern 3

ZDF

ARD

If the station table contains more than

20 stations, you can display the next 10

stations by pressing the oval cursor con-

trol key ̇ ̈.

56 Hessen 3

55 SW-BW

54 N-TV

53 West 3

52 Phönix

Select with ᕪ...ᕩ

Back to the last station

Confirm with

You can use the red

key to switch back and

forth between the last two stations you have selec-

ted.

1) Possible only in DVB mode !

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the Info

7. User Help (Information)

During the design of this TV set, we have made

every effort to make it as easy a possible for you

to use it and we hope that you will enjoy familiari-

sing yourself with your new TV set.

With the "Information" menu, the TV set is able to

answer the many questions which may come up

during installation and setup.

To display this menu, simply press the "INFO" key

for the table of contents.

INFO

The "Information" menu (user help)

In the table of contents or the index, you

can select the item of interest with the cursor

control key.

Information

Contents

Index

Station selection

Use the cursor-right key ̈ to scroll for-

Picture settings

wards through the contents or index ...

Sound settings

AV playback

Recording facilities:

- Timer recording

- Direct recording

- AV copying

Use the cursor-left key ̇ to scroll back-

wards through the contents or index ...

Use the cursor-up key ̆ to select the last

underlined item ...

Teletext

Function keys

DVB radio mode

Electronic Programm Guide (EPG)

Use the cursor-down key ̄ to select the

menu lines...

Select the underlined text with the cursor.

INFO

: further information

: table of contents

Visited pages: © back

... and then press the "OK" key to display

the explanation of the selected item.

You can select any underlined word in the table of

contents, the index or the explanation of a selec-

ted item with the cursor. Pressing the "OK" key

then displays the explanation for this word.

You can also scroll forwards and backwards

through previously displayed pages with the aid

of the red and green keys.

Download from Www.Somanuals.com. All Manuals Search And Download.

8. Menu Control

Opening the menu

With the "TV menu", we provide you with an

assistant to help you find your way through the

many possible settings of the TV set.

Don't be afraid to change any settings in the

various menus. No changes will be

saved unless you press the "OK" key to

confirm them. If you are not sure whet-

her you want to keep a changed set-

ting, you can exit from the menu at any

time, without saving any changes, by

pressing the "EXIT" key.

Cursor

Subject*

Section*

Rotation²⁾³⁾

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

Within the TV menu, you can return to

the previous main menu item at any

time by pressing the "MENU" key. If

you are not sure what a menu item

does, press the "INFO" key for more

information.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Brightness

Open the menu

with

EXIT

: back to TV

Setting window

picture

In order to return to the menu, press

the "INFO" key twice.

Related numeric keys

You can open each of the five main sections of the

menu with the key of the corresponding colour.

The "card file" which is then displayed is subdivi-

ded into Subjects (on the left) and Sections (on the

right), and you can select these by moving the

red, triangular cursor with the oval cursor control

key or with the numeric keys.

When you press the "OK" key, the current setting

for the selected item is shown in the "Setting win-

dow" below the card file and can be adjusted

with the

key.

You can save the new setting by pressing the

"OK" key, which also returns you to the list of sec-

tions. If you do not want to save the new setting,

press the "MENU" key to return to the correspon-

ding main menu item or press the "EXIT" key to

close the menu.

* The number of subjects and sections depends

on the selected scope of operation. Depen-

ding on the configuration of the TV set, the

various menu items may be displayed in a

different order and numbered differently.

You can delete any incorrect inputs with the II key.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

9. Teletext

Teletext is an additional service provided free of

charge by many TV stations. It is an "electronic

magazine" through which you can browse in

various ways.

TEXT

Opening Teletext:

• Press the "TEXT" key. If the selected

Gehörlose

Börse

Service

BR-Intern

Hörfunk

Fernsehen

Sport

Bayern

Schlagzeilen

Übersicht

station offers "TOP-Text", a "card

file" is displayed (see the picture on

the left).

If "TOP-Text" is not available, Teletext

page 100 is displayed (see the pictu-

re below).

Impressum

A-Z

• In the TOP-Text card file, you can

select the desired cards with the cur-

sor control key or with the numeric

keys.

100

• Press the "OK" key to open the selec-

ted card.

Controlling Teletext with pages

displayed:

Blue key

Uhrzeit

– next subject.

– next section.

– next page.

100 ProSieben

Datum

Kartenlegen

Live

458

Gratis

Yellow key

White key

09.56 talk talk talk. . . . . . . . . . . . . . . . . . . . . . 334

10.56 S.O.S.Style & Home. . . . . . . . . . . . . . . . 335

Aktuelle Meldungen. . . . . . . . . . . . . . . . . . . . . . . 112

Computer Wurm . . . . . . . . . . . . . . . . . . . . . . . . . 113

TED: Brauchen wir Schutz ? . . . . . . . . . . . . . . . . . 123

Weitere Meldungen. . . . . . . . . . . . . . . . . . . . . . . 135

After pressing the coloured pre-selec-

tion key, you can step through the sub-

jects, sections or pages with the cursor

control key or with the numeric keys.

If you wish to select a specific page,

enter its page number on the numeric

keys.

100

00 01 02 03 04 05 06 07 08 09

If sub-pages exist for the selected page, the page

numbers are displayed in black. In the example

shown here, there are five sub-pages.

Page number

Sub-pages

You can step through these sub-pages with the

cursor control key.

Download from Www.Somanuals.com. All Manuals Search And Download.

9. Teletext

Double font size

Setting marks in Teletext ⁵⁾

You can double the size of the font used

for Teletext pages with the F1 key. Pres-

sing this key once displays an enlarged

picture of the upper third of the page.

Pressing it a second and third time dis-

plays the centre and lower thirds of the

page. Pressing a fourth time displays the

entire page again.

As a user of Teletext, you will probably

want to visit certain pages (such as

stock-market news, news pages or the

weather forecast) regularly.

In order to find these pages quickly, you

can set marks to suit your personal

requirements.

To do this, open a page for which you

want to set a mark.

Riddle key (display hidden text)

Function key F2 is programmed in the

factory to display hidden text, such as

the answers to riddles.

• Press the red

key for "Set" to place

a mark on this page. The number of

the mark you have just set is displayed

above the window containing the num-

ber of the Teletext page. In the case of

multiple pages, the mark is always set

and displayed for the currently dis-

played sub-page.

Back to the last index page

You can return directly to the last index

page you have displayed by pressing

the numeric key ᕪ.

Up to 10 marks can be set for

Stop page scrolling

ꢀ

each programme position.

The II key or the "OK" key can be used

to stop the automatic scrolling executed

by some pages, and to enable this

again.

Scrolling through marked

Teletext pages ⁵⁾

With the Teletext window open, you can

step sequentially through the marked

Page selection with the cursor

pages with the green

key.

Press the "OK" key to stop page scrol-

ling. The cursor ̈ is now positioned at

the top left corner of the page and you

can use the cursor control key ̇ ̈ ̆ ̄

to position it anywhere on the displayed

page. This function is useful on index

pages (such as pages 100, 200, etc.) in

order to select a page you want to see.

After positioning the cursor on the des-

ired page number, press the "OK" key to

display its contents.

An even easier method is by pressing the

"TEXT" key while the TV programme is

displayed. Each time you press this key,

the next marked page is displayed. After

the last marked page, the TV picture is

displayed again.

5) Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

9. Teletext

Displaying all Teletext marks ⁵⁾

If you have set marks for a programme position,

you can display an overview of these marks by

pressing the F3 key. The displayed list shows whe-

re the marks are set. Press F3 again to hide the

list.

You can select the individual marks in the list with

the numeric keys.

Clearing Teletext marks ⁵⁾

Open the Teletext page whose mark is to be dele-

ted and press the red

mark.

key "Delete" to delete the

Subtitles in Teletext

Your TV set is capable of displaying subtitles.

When a programme for which subtitles exist

starts, the TV station displays a box showing the

Teletext page on which these can be found.

• Press the "TEXT" key to open Teletext.

• If this is a "TOP-Text" station, the card file is dis-

played. Press the "OK" key and open any avai-

lable page.

• Use the numeric keys to enter the number of the

page containing the subtitles.

5) Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

10. AV Playback

Opening the menu

AV playback (devices with switching voltage)

Playing back a recording from a video cassette,

DVD, etc. on a connected AV device is called AV

playback.

In order to see the picture, you must programme

your TV set to execute an automatic programme

change at the EURO socket to which the AV devi-

ce is connected.

ᕧ

Programming a programme change

This menu item is not available in a 2 **

ꢀ

menu (see Section 30, Scope of Operation).

The automatic programme

change is set in the factory to

"ON" for both EURO sockets.

ꢀ

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the red key . The menu

"Configuration" is displayed.

–

EURO 2

EURO 1

Language

Operating

• Use the corresponding numeric key

Programm change

of switching line.

ᕧ

(in this example: ) to select the

Change with

Save with

Change stations on

menu item "EURO sockets".

• Use the cursor control key to select

"EURO 1" or "EURO 2".

• Press the "OK" key and then, in the setting win-

dow, use the

ge on".

key to select "Programme chan-

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

If you now start to play back a recording on the

connected AV device, the TV set changes automa-

tically from any other programme position to the

playback mode.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

10. AV Playback

AV playback

(devices without switching voltage)

In order to see the played back picture, you must

switch the TV set to playback mode.

• Select any programme position.

• Press the "AV" key.

• Use the corresponding numeric key to

select the AV device you want to use.

• The TV set now changes from the cur-

rent programme to the selected play-

back device.

2 DVD-Player

1 Videorecorder

ᕪ

ᕩ

Select with ...

Confirm with

• Start the replay function on the AV

device. This AV selection remains acti-

ve until you switch to any other pro-

gramme position.

• After watching the film from the AV device,

press the "TV" key to return to normal TV mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

10.1 AV Playback

VCR function

Opening the menu

The menu item "VCR" is not available in a

2 ** menu.

ꢀ

Picture quality when playing back from

tape devices

The VCR function ensures an optimum picture

quality when playing back recordings from tape

devices such as video cassette recorders or cam-

corders.

ᕢ

Setting the VCR function

• Select the appropriate AV level by pressing the

"AV" key and using the numeric keys to select

the AV device which is to supply the pictures.

ᕪ

• Press the "MENU" key to open the TV

menu.

• Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

• Use the corresponding numeric key (in

ᕢ)

the example:

to select the menu

item "Pict.settings for Pr."

–

Change with

Accept value with

VCR settings Opt.1

• Press the F1 key to display further

options.

• Use the corresponding numeric key (in the

ᕪ)

example:

to select the menu item "VCR".

key to select "Opt.1". If this setting

• Use the

does not produce a satisfactory result, you can

try using "Opt.2".

EXIT

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 11. General Picture Settings

Some of the menu items are not available

in a 2 ** menu.

ꢀ

The picture settings brightness, contrast, colour

intensity, sharpness and noise reduction can be set

generally for all programme positions and saved

as standard values which can be recalled at any

time by pressing the "OK" key.

Opening the picture settings menu:

This example describes how the brightness is

adjusted. The other picture settings can be adjus-

ted in a similar manner.

Rotation²⁾³⁾

• Press the "MENU" key.

Progressive²⁾³⁾

The TV menu appears on the screen.

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

• Press the blue key

. The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Use the cursor control key ̈ to select

the menu item "Brightness".

Brightness

–

Change with

Brightness

Accept current

value as default

value.

Standard value

• The various menu items can be selec-

ted with the aid of the numeric keys.

Use as default value: Yes

• In the setting window, use the

the setting.

key to change

• Use the cursor control key ̄ to select the third

line "Save as standard values".

• If you wish to save the new setting, use the

EXIT

key to select "Yes".

• Press the "OK" key to save the changed setting

as a standard value.

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

If the standard values do not provide a

ꢀ

satisfactory picture in some programme

positions, you can make settings for these

positions which differ from the standard

values. See the next sections. 11.1 and

11.2.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

11. General Picture Settings Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

The picture settings zoom, vertical position, auto-

matic zoom ^{2) 3)}and panorama ²⁾can be set and

saved as general settings for all programme posi-

tions.

Setting the zoom ³⁾/panorama mode ^{2) 3)}

Panorama can be set only on TV sets with a

16:9 screen.

ꢀ

Rotation²⁾³⁾

• Press the "MENU" key.

The TV menu appears on the screen.

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

• Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Use the cursor control key ̈ to select

Brightness

the menu item "Brightness".

–

Change with

Zoom value

Panorama²⁾

Yes

Accept value with.

Picture pos., vert. 0% Pan. mode²⁾Non-linear

• Press the corresponding numeric key

Automatic zoom

off

to select "Zoom/Panorama ²⁾".

• Use the cursor control key to select the desired

menu items.

• Use the

key to change the settings for

"Zoom/Panorama ²⁾".

• Press the "OK" key to save the new settings.

The picture shows the factory settings.

• Press the "EXIT" key to close the TV menu.

EXIT

The functions "Panorama ²⁾" and "Zoom"

can be combined with each other.

ꢀ

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 11. General Picture Settings

Some of the menu items are not available

in a 2 ** menu.

ꢀ

The picture settings CTI ³⁾, comb filter ³⁾and

progressive ³⁾can be set and saved as general

settings for all programme positions.

Activating the CTI function ³⁾:

This example describes how to change the setting

for the CTI function ³⁾. The picture settings comb

filter and progressive can be changed in a similar

manner.

ᕦ

• Press the "MENU" key.

The TV menu appears on the screen.

Rotation²⁾³⁾

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

• Press the blue key

. The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Use the cursor control key ̈ to select

the menu item "Brightness".

Brightness

–

Change with

• Use the corresponding numeric key to

select the desired menu item (in this

example: ² for the CTI function.

Accept value with.

CTI On

)

• In the setting window, use the

to change the setting.

key

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

11. General Picture Settings Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Rotation ^{2) 3)}

Rotation can be adjusted only on TV sets

equipped with a suitable CRT.

ꢀ

Adjusting the rotation:

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu "Picture and

sound" and the menu item "General picture

settings" are pre-selected.

ᕪ

Rotation²⁾³⁾

• Use the cursor control key ̈ to select

the menu item "Brightness".

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

• Use the corresponding numeric key (in

the example: ᕪ for the function

"Rotation") to select the desired

function.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Pressing the – key rotates the picture

Brightness

counter-clockwise.

Pressing the + key rotates the picture

clockwise.

–

Change with

Accept value with.

Rotation

• Press the "OK" key to save the new

setting.

The picture shows the factory setting.

• Press the "EXIT" key to close the TV menu.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

11.1 Picture Settings for

Programmes via TV Menu

Opening the menu

Picture settings for individual programme

positions are not available in a 2 ** menu.

ꢀ

If the standard values do not provide a satisfacto-

ry picture in some programme positions, you can

make different settings for these positions which

override almost all of the general picture settings.

These individual settings apply only to the pro-

gramme position for which they are made, and

they cannot be overwritten with the

standard values. In addition to the

VCR³⁾

Colour standard³⁾

Colour offset³⁾

CTI³⁾

Comb filter²⁾³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

general picture settings, the individual

settings also include the settings colour

offset, colour standard and VCR.

Individual picture settings for

programme position xy:

• Select the programme position whose

picture settings you wish to change.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

–

Change with

Accept value with.

CTI Aus

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu "Picture and

sound" and the menu item "General picture set-

tings" are pre-selected.

• Use the cursor control key ̆ to select the menu

item "Pic. settings for Pr." And press the "OK"

key.

EXIT

• Use the corresponding numeric keys (in this

example: ² for the CTI function) to select the

desired menu items.

• In the setting window, use the

the setting.

key to change

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

11.2 Picture Settings for

Opening the menu

Programme via Station Table

Individual picture settings for

programme position xy:

• Select the programme position whose picture

settings you wish to change.

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the white key . The station table is dis-

played with the currently active programme

position highlighted.

• Press the F2 key to enable editing of the station

table.

0010 Hessen 3

0009 Südwest

0008 MDR

• Press the cursor control key ̈ to move

to the subject side.

0007 PRO 7

• Use the corresponding numeric keys

(in this example: ¿ for the picture

quality) to select the desired menu

items.

0006 RTL 2

0005 RTL

0004 SAT 1

0003 Bayern 3

0002 ZDF

Sound corrections

Colour standard

Picture quality

Picture correct.

Enter logo

0001 ARD

• In the setting window, use the cursor

Frequency/channel

control key to select the desired func-

tion.

:select

Picture sharpnessgen. Noise reduction gen.

:go to the

settings.

CTI

gen. Colour offset

off

VCR

• Use the

key to change the setting.

"gen." means here that the new setting will

overwrite the related general picture setting (see

pages 18 and 20).

The individual settings made here which

differ from the general settings remain

saved.

ꢀ

EXIT

• Press the "OK" key to save the new settings.

• Press the "EXIT" key to close the TV menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 12. General Sound Settings

Some of the menu items are not available

in a 2 ** menu.

ꢀ

The sound settings volume, treble, bass, stereo

wide and spatial sound can be set generally for

all programme positions and saved as standard

values which can be recalled at any time by pres-

sing the "OK" key.

ᕣ

Opening the sound settings menu:

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu

Base width³⁾

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Spatial sound³⁾

Balance

Tone settings

Volume headphones

Bass

• Use the corresponding numeric key

(in the example: ») to select

"General sound settings".

Treble

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Volume control³⁾

SRS WOW²⁾³⁾

Volume

• Use the corresponding numeric keys

to select the desired menu items in the

right-hand column.

–

Change with

Volume

40%

35%

Accept current

value as default

value.

Standard value

Use as default value :

Yes

• Press the "OK" key to open the selec-

ted menu item for editing.

• In the setting window, use the

the setting.

key to change

• Use the cursor control key ̄ to select the third

line "Save as standard value".

• If you wish to save the new setting, use the

EXIT

key to select "Yes".

• Press the "OK" key to save the new settings as

standard values.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• Press the "EXIT" key to close the TV menu.

If the standard values do not provide satis-

ꢀ

factory results for some programme posi-

tions, you can make different individual set-

tings for these positions. See sections 12.1.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

12. General Sound Settings Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Setting SRS-WOW ²⁾

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu "Picture and

sound" and the menu item "General picture set-

tings" are pre-selected.

ᕣ

ᕢ

• Press the numeric key » to select "General

sound settings".

Base width³⁾

Spatial sound³⁾

Balance

• Use the corresponding numeric key

(in the example: ᕢ) to select

"SRS–WOW" ²⁾.

Tone settings

Volume headphones

Bass

• In the setting window, use the

to change the setting.

key

Treble

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Volume control³⁾

SRS WOW²⁾³⁾

Volume

• Press the "OK" key to save the chan-

ged setting.

–

• „Press the "EXIT" key to close the

TV menu.

Change with

Accept value with.

SRS WOW²⁾on

If the SRS-WOW function is

active, the menu items "stereo wide" and

"spatial sound" are disabled.

ꢀ

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 12. General Sound Settings

Automatic volume correction

Some TV stations transmit their commercials at a

higher sound volume than that for the normal pro-

gramme. In order to save you from adjusting the

volume each time with the remote control, you can

activate automatic volume correction.

With this function active, there is little difference in

the volume levels for the normal programme and

the commercials.

ᕣ

The setting made here applies to all programme

positions.

Base width³⁾

Opening the volume correction

Spatial sound³⁾

Balance

menu:

• Press the "MENU" key.

The TV menu appears on the screen.

Tone settings

Volume headphones

Bass

• Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Treble

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Volume control³⁾

SRS WOW²⁾³⁾

Volume

–

Change with

Accept value with.

• Use the corresponding numeric key

(in the example: ») to select "Gene-

Volume control on

ral sound settings".

• Use the corresponding numeric key (in the

example: ») to select "Volume correction".

• In the setting window, use the

the setting.

key to change

EXIT

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

The function "Volume correction" in the

ꢀ

menu "General sound settings" does not

overwrite the function "Volume correction"

in the menu "Sound settings for Pr...".

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

12.1 Sound Settings for

Programmes via TV Menu

Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Volume correction

Various TV stations broadcast their programmes

with different sound volumes. This volume diffe-

rence can be minimised by correcting the volume.

This adjustment remains active even if the stan-

dard sound values are recalled.

ᕤ

Adjusting the volume correction:

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Forced mono

Tone settings

Volume correction

• Use the corresponding numeric key

(in the example: ¿) to select "Sound

settings for Pr.".

–

Change with

Accept value with.

• Press the "OK" key and then, in the

Volume correction -15

setting widow, use the

change the setting.

key to

• Press the "OK" key to save the new settings.

• Press the "EXIT" key to close the TV menu.

Individual sound settings can also be made

in the station table.

ꢀ

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

12.1 Sound Settings for

Programmes via TV Menu

Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Tone setting

The tone setting can be set to "Normal" or

"Speech". The setting "Speech" should be used

primarily for stations which broadcast mainly pro-

grammes with a lot of speech, such as news sta-

tions. The setting "Normal" is better for music pro-

grammes.

ᕤ

ᕢ

Adjusting the tone setting :

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

Forced mono

Tone settings

Volume correction

–

Change with

• Use the corresponding numeric key

(in the example: ¿) to select

"Sound settings for Pr.".

Accept value with.

Tone settings Speech

• Use the corresponding numeric key (in the

example: ·) to select

"Tone settings".

• In the setting window, use the

the setting.

key to change

EXIT

• Press the "OK" key to save the new settings.

• Press the "EXIT" key to close the TV menu.

Individual sound settings can also be made

in the station table.

ꢀ

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

12.1 Sound Settings for

Programmes via TV Menu

Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Forced mono

It may happen that your TV set switches from

mono to stereo in the middle of a programme, alt-

hough no stereo sound is being transmitted. This is

generally caused by the local reception condi-

tions. If you activate "Forced mono" for the selec-

ted programme position, all programmes from this

station will be reproduced in mono.

ᕤ

ᕣ

Activating forced mono:

• Press the "MENU" key.

The TV menu appears on the screen.

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

•Press the blue key . The menu

"Picture and sound" and the menu

item "General picture settings" are

Forced mono

Tone settings

Volume correction

pre-selected.

–

Change with

Accept value with.

• Use the corresponding numeric key (in

the example: ¿) to select "Sound set-

tings for Pr.".

Forced mono on

• Use the corresponding numeric key (in the

example: ») to select "Forced mono".

• In the setting window, use the

the setting.

key to change

• Press the "OK" key to save the new settings.

• Press the "EXIT" key to close the TV menu.

EXIT

Individual sound settings can also be made

ꢀ

in the station table.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

12.1 Sound Settings for Prog.

via the Station Table

Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Making sound corrections:

• Select the programme position whose sound set-

tings you wish to change.

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the white key . The station table is dis-

played with the currently active programme

position highlighted.

ᕦ

• Press the F2 key to enable editing of

the station table.

0010 Hessen 3

0009 Südwest

0008 MDR

• Use the cursor control key ̈ to move

0007 PRO 7

0006 RTL 2

0005 RTL

0004 SAT 1

0003 Bayern 3

0002 ZDF

to the subjects side.

Sound corrections

Colour standard

Picture quality

Picture correct.

Enter logo

Frequency/channel

• Use the corresponding numeric keys

(in this example: ²) for sound cor-

rections) to select the desired menu

items.

0001 ARD

: select

Volume correction

Forced mono

off

Tone settings

gen.

: go to the

• In the setting window, use the cursor

control key to select the desired func-

tions.

settings.

The use of the

key to change the selected set-

ting. "gen." means here that the new setting will

overwrite the general sound settings (see pages

24 and 26).

The individual settings made here, which

differ from the standard values, remain

saved.

ꢀ

EXIT

Press the "OK" key to save the new settings.

Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

13. Colour Standard

Opening the menu

Some of the menu items are not available

in a 2 ** menu.

ꢀ

Normally, your TV set will automatically detect the

colour standard (PAL, SECAM, NTSC, NTSC44,

PAL60, PALM or Pal N) transmitted by each sta-

tion. If this does not function correctly for some

programme positions, you can select the colour

standard manually.

The factory setting for the colour standard is

"Automatic".

Setting the colour standard:

• Select the programme position for

which you wish to select the colour

standard.

ᕥ

0010 Hessen 3

0009 Südwest

0008 MDR

0007 PRO 7

0006 RTL 2

0005 RTL

• Press the "MENU" key.

The TV menu appears on the screen.

Sound corrections

Colour standard

Picture quality

Picture correct.

Enter logo

• Press the white key . The station

table is displayed with the currently

active programme position highligh-

ted.

0004 SAT 1

0003 Bayern 3

0002 ZDF

0001 ARD

Frequency/channel

: select

settings.

: go to the

• Press the F2 key to enable editing of

the station table.

Colour standard Auto. mode

• Press the cursor control key ̈ to move to the

subjects side.

• Use the corresponding numeric key (in the

example: ´) to select "Colour standard".

• In the setting window, use the

the setting.

key to change

• Press the "OK" key to save the new setting.

EXIT

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

14. Automatic Zoom

The menu item "Automatic zoom" is not

available in a 2 ** menu.

ꢀ

When the automatic zoom function is active, pro-

grammes in a "widescreen" format (such as pro-

grammes in 16:9) are expanded to fill as much of

the screen as possible.

If the function is inactive, the programmes are dis-

played in their original format.

Activating the automatic zoom ²⁾

• Press the "MENU" key. The TV menu appears on

the screen.

ᕧ

• Press the blue key . The menu

Rotation²⁾³⁾

"Picture and sound" and the menu

item "General picture settings" are

pre-selected.

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

• Use the cursor control key ̈ to select

the menu item "Brightness".

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Use the corresponding numeric key

(in the example: ¶) to select the

function "Zoom/Panorama".

Brightness

–

Change with

Zoom value

Accept value with

Picture pos., vert. 0%

Automatic zoom off

• Use the cursor control key ̄ to select

the menu item "Automatic zoom".

• Use the

key to change the setting.

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

15. Childlock

Opening the menu

With the aid of the childlock function, you can

determine whether or not the TV set can be swit-

ched on and which stations may be selected at

which times. The childlock can be set such that:

a) it is always active,

b) one to six TV, radio or AV programmes (Prog A

... Prog F) are exempted from the locking func-

tion (permitted programmes), or

c) all programmes, or programmes which are not

locked, may be viewed during a permitted time

period (TV start – TV end).

The childlock must be saved once with a 4-digit

"code" (password).

a) Activating the childlock

• Press the "MENU" key.

The TV menu appears on the screen.

• Press the green key

menu "Timer".

to open the

• Use the cursor control key ̈ to select

Recording control

Permitted AV prog.

Permitted radio prog.

Permitted TV prog.

Settings

Timer setting

Timer control

Reminder

"Settings" and press the "OK" key.

• In the setting window, use the cursor

Childlock

control key to select the menu item

–

Change with

"Activate" and then use the

set the childlock to "Active".

key to

Accept value with

Start viewing time--:-- End viewing time --:--

Code **** Activation on

• Use the cursor control key ̇ to select

"Code" and enter your personal 4-digit code

with the numeric keys.

Make a note of this code!

EXIT

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

15. Childlock

b) Permitted programmes:

Activate the childlock as described in step a).

Use the corresponding numeric key to select the

menu item "Permitted xx progs." (xx = TV, radio

or AV). Press the "OK" key and, in the

setting window, enter the programme

positions with the numeric keys or use

the

key to select the desired pro-

gramme positions.

• Press the "OK" key to save the new

Recording control

settings.

Permitted AV prog.

Timer setting

Timer control

Reminder

Permitted radio prog.

Permitted TV prog.

Settings

c) TV start – TV end

Activate the childlock as described in

step a). In the setting window, use the

cursor control key to select the start and

end times and enter the desired times

with the numeric keys. Press the "OK"

key to save the settings.

Childlock

Enter programme

position and save

Prog A

Prog C

Prog E

Kabel 1 Prog B

-----

clear.

with

----- Prog D

----- Prog F

Protecting the childlock settings with

your code

• Use the cursor control key to select "Code" and

enter your personal code (password) with the

numeric keys.

Make a note of this code, since the child

lock can be deactivated only if the correct

code is entered !

ꢀ

• Press the "OK" key to save the settings.

• Press the "EXIT" key to close the TV menu.

• Switch off the TV set with the

key.

The childlock is not fully activated until the

TV set is switched off.

ꢀ

Deactivating the childlock

If the childlock is active, a window requesting your

personal code is displayed each time the TV set is

switched on. Entering the correct code enables the

TV set and it can then be used normally until it is

switched off again. To cancel the childlock func-

tion, proceed as described in step a), above, and

set the childlock to "Inactive".

Download from Www.Somanuals.com. All Manuals Search And Download.

16. Reminder

Opening the menu

The menu item "Reminder" is not available

in a 2 ** menu.

ꢀ

If you wish to be reminded of something while

watching TV, you can set a reminder for any des-

ired time. At this time, a window with the remin-

der appears on the screen.

Setting the reminder time

ᕢ

• Press the "MENU" key to open the TV menu.

• Press the green key

menu.

to open the "Timer"

• Press the numeric key ᕢ to select "Reminder".

• Press the "OK" key and then, in the

setting window, enter the desired time

(four digits) with the numeric keys.

• Press the "OK" key to save this setting.

Recording control

Timer setting

Timer control

Reminder

• Press the "EXIT" key to close the

TV menu.

At the programmed time, a window with

the reminder is displayed on the screen.

You can close this window by pressing

any key on the remote control.

Childlock

Reminder time

Clear the time with

Save with

Abort with

Time 21:00

If you do not want the reminder

to appear every day, you must clear the

time in the menu by pressing the ll key.

ꢀ

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

17. Timer Control

The menu items "On time" and "Off time"

are not available in a 2 ** menu.

ꢀ

In the menu item "Timer control", you can pro-

gramme a switch-on time, a switch-off time and a

sleep timer (switch off after ...).

The switch-on time is the time at which the TV set

is to be switched on automatically.

The switch-off time is the time at which the TV set

is to be switched off automatically.

ᕣ

The sleep timer (switch off after...) switches off the

TV set after a programmed delay (which can be

set in steps of 15 minutes).

Setting the on time and off time

• Press the "MENU" key to open the TV

menu.

• Press the green key

"Timer" menu.

to open the

Recording control

Timer setting

Timer control

Reminder

Switch off after...

Switch-off time

Switch-on time

• Press the numeric key ᕢ to select

"Timer control".

Childlock

Clear the time with

• Press the "OK" key and then, in the

setting window, enter the desired time

(four digits) with the numeric keys.

Save with

Time 19:00

Abort withMENU

• Press the "OK" key to save the setting.

• Press the "EXIT" key to close the TV menu.

At the programmed on time, the TV set is switched

on from the standby state (red LED lights). You

must confirm this automatic action by pressing

any key on the remote control. If this is not done,

the TV set will switch back to the standby state

after 10 minutes. This ensures that the TV set does

not stay on if you are not at home.

EXIT

If you do not want to have the TV set switch

ꢀ

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

itself on each day, you must clear the on

and off times in the menu by pressing the ll

key.

Download from Www.Somanuals.com. All Manuals Search And Download.

17.1 Setting the Time

Opening the menu

Normally, the TV set will determine the current

date and time from the Teletext signals of the cur-

rently selected station (providing this station sends

Teletext).

If this is not the case, or if an incorrect date or

time is displayed, you can set the date and time

manually.

ᕤ

In almost all cases, you will not need to do this.

Even the changeover between winter time and

summer time is executed automatically.

Setting the date and time manually:

• Press the "MENU" key to open the TV menu.

• Press the green key

"Timer" menu.

to open the

• Press the numeric key ¿ to select

"Time settings".

Recording control

Timer setting

Timer control

Reminder

• Press the "OK" key and then, in the

setting window, enter the current time

with the numeric keys.

Local time offset

Current date

Current lokal time

Childlock

Save with

Abort with

• You can then start the internal clock

precisely by pressing the "OK" key

when the time you have entered is

reached.

Time 19:00:00

• Press the numeric key · to select

"Current date".

• In the setting window, enter the date with the

numeric keys.

ᕢ

• Press the "OK" key to save the settings.

• Press the "EXIT" key to close the TV menu.

The local time offset is the difference between

EXIT

the local time where the TV set is installed and

Greenwich Mean Time (GMT). The TV set nor-

mally detects this time offset and also the addi-

tional changeover to summer time.

The time needs to be set manually only if it is

not detected automatically.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

17.2 Recording Control

This menu item is not available in a 2 **

menu.

ꢀ

In the menu item "Recording control", you can set a

lead time and an overrun time for timer recordings.

The TV set is automatically switched to the pro-

gramme position from which the recording is to

be made at a time which is the number of minutes

programmed as the lead time before the pro-

grammed starting time for the recording.

At the end of the programmed recording time, the

TV set remains set to this programme position for

the period programmed as the overrun time.

ᕥ

For VPS recordings, the TV set is automatically

switched to the programme position

from which the recording is to be made

at a time which is the number of minu-

tes programmed as the VPS lead time

before the programmed starting time

for the recording. By default, the TV set

switches to this programme position

about one hour before the programmed

Recording control

Timer setting

Timer control

Reminder

Lead time with VPS

Overrun time

start time for a VPS recording.

Lead time

Childlock

–

Change with

Setting the lead time, VPS lead

Accept value with

Lead time 5 min

time and overrun time

• Press the "MENU" key to open the TV

menu.

•

Press the green key

to open the "Timer" menu.

Use the corresponding numeric key (in the exam-

ple:

) to select the menu item "Recording con-

trol".

• Use the cursor control key to select the desired

menu item.

EXIT

• Press the "OK" key and then, in the setting win-

dow, use the

overrun time.

key to set the desired lead or

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• Press the "OK" key to save the settings.

• Press the "EXIT" key to close the TV menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

17.2 Recording control

Application example:

You wish to record a programme received via

DVB-T. The programme starts at 22:45 hours,

ends at 23:40 hours and is broadcast on ITV.

Set up a "manual timer" as described in Section

18, "Special Functions 2, Timer Overview" or set

a timer with the aid of the EPG as described in

Section 22.3 “Using EPG, Recording a Program-

me". The timer recording does not use VPS.

Set the lead time to 3 minutes and the overrun

time to 10 minutes.

At the programmed start time minus the pro-

grammed lead time of three minutes, the TV set is

either:

- switched on from the standby state (red LED

lights) with the programme position for ITV selec-

ted, whereby the screen remains dark but the

programme is sent via the EURO socket to your

recorder, or

- switched to the programme position for ITV if it is

already switched on.

At the programmed end of the recording (at

23:40 hours) the programme position for ITV

remains selected for the programmed overrun time

of 10 minutes.

It is not possible to switch to another pro-

gramme position during the programmed

lead and overrun times.

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Picture-in-Picture

Opening the menu

The picture-in-picture (PIP) function can only be

used to display the picture from an AV device.

Activating the PIP function:

• The F1 key is pre-programmed with

the picture-in-picture function.

• You can use the cursor control keys

̇ ̈ to move the PIP picture on the

screen. The last position to which this

picture was set is saved.

• By pressing the "OK" key, you can

set the frame of the PIP picture to

active (red) or inactive (white).

• The contents of the PIP picture can be

changed only if its frame is active

(red). If this is the case, you can use

the numeric keys or the "P+/P-"

rocker key to select a different AV

programme position.

If you wish to display the picture from a connected

AV device as a picture-in-picture, press the "AV"

key and then use the numeric keys to select the

desired AV device.

• Pressing the red key

the two pictures.

swaps the contents of

• Pressing the green key

causes the PIP picture

to expand to fill the screen and terminates the

PIP function.

• To close the PIP picture, press the "EXIT" key.

If a rec*ording has been programmed in

ꢀ

the timer menu, activating the PIP function

displays the programme which is being

recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Normal/Speech

Opening the menu

Selection of "Normal" or "Speech" is des-

cribed in Section 12.1, "Tone Settings".

Special functions 2

1 Normal/Speech

In this menu, you can temporarily select

"Normal" or "Speech". The selection

remains active until you switch to another

programme position, switch to standby

mode or switch the TV set off completely.

This setting has no effect of the setting des-

cribed in Section 12.1, "Tone Settings".

9 Timer-Overview

0 Direct recording

18. Special Functions

Opening the menu

Recording a programme with a timer

If you wish to record a programme which your

video recorder or DVD recorder cannot receive

directly because it does not have a suitable tuner

(such as DVB-T or DVB-C), you can use the "Timer

overview" to make such programmes available to

the recording device.

ᕩ

Setting a timer manually for a recording:

Recording

• Press the F2 key. If you press F2 brie-

Reminder

Yes

Preview

17:23

–

Mon Tue Wed Thu Fri Sat Sun 29.04.

fly, the function programmed for F2

Pr ---

(see Section 18.1, "Programming the

function keys") is executed.

If you hold down F2 for about two

seconds, all possible selections are

Date

Start

End

VPS

--.--.

--:--

displayed.

Recording device

Videorecorder

• If all possible selections are displayed,

press the corresponding numeric key

(in the example: ¾) to open the timer

menu.

–

Change with

:select.

:save the timer.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• If a timer already exists, press the F1 key.

• The cursor is located at the left of the first line

"Record". The number of subjects and sections

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Opening the menu

Recording a programme with a timer

depends on the selected scope of operation.

Depending on the configuration of the TV set,

the various menu items may be displayed in a

different order and numbered differently.

Use the

key to set this menu item to "Yes".

• If desired, press cursor control key ̄ and use

the - + key to activate the reminder

function. If the reminder function is acti-

Recording

Reminder

Yes

Preview

17:23

–

ve, a reminder window is displayed on

the screen one minute before the start

time programmed for the timer.

Mon Tue Wed Thu Fri Sat Sun 29.04.

20:00 ꢁꢁ Das Erste

Tagesschau

22:45 ꢁꢁ SAT 1

-20:15

SAT 1

-23:40

Date

Start

End

01.05. Planetopia

•

Use the numeric keys to select the pro-

gramme position (see the station table

of the TV set) which is to make the pro-

gramme available for recording.

22:45

23:40

Yes

VPS

Recording device

Videorecorder

• Press the cursor control key ̄ and

use the numeric keys to enter the

date, start time and end time of the

programme you want to record..

:select

0..9:set time

:new timer

–

:clear timer

:edit

If you inadvertently enter a wrong time,

you can delete it with the II key or overwri-

te it with the numeric keys.

ꢀ

• Press the cursor control key ̄ and use the

key to select the recording device connected to

the TV set which is to be used for the recording.

•

Press the "OK" key to save the programmed set-

tings. The settings are stored in the timer memo-

ry.

• Press the "EXIT" key to close the TV menu.

Clearing a timer:

• Press the F2 key.

• Press numeric key ᕩ to open the timer menu.

• Use the cursor control key to select the timer you

wish to clear and press II to mark it for deletion.

A window is displayed on the screen, asking

whether you really want to clear this timer. Con-

firm the intended action by pressing the appro-

priate key.

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Opening the menu

Direct recording of a programme

If you wish to record the programme you are cur-

rently watching, you can start a direct (one-touch)

recording to make the current programme availa-

ble to a recording device connected to the EURO

sockets.

Starting a direct recording:

• Press the F2 key.

If you press F2 briefly, the function programmed

for F2 (see Section 18.1, "Programming the

Function keys") is executed.

If you hold down F2 for about two seconds, all

possible selections are displayed.

ᕪ

Recording

Reminder

Yes

• Press numeric key ᕪ to open the

timer menu window.

The timer menu window displays the

programme position, the date and

the EPG data for the current pro-

gramme or for the next two hours.

SAT 1

Date

Start

End

01.05.

22:45

23:40

VPS

Recording device

Videorecorder

• If there is more than one AV device

connected to your TV set, use the cur-

sor control key ̄ to select the propo-

–

Change with

:select

:save the timer

sed recording device and use the

key to select the desired device.

• Press the "OK" key to save the settings.

On the recording device (e.g. video recor-

ꢀ

der), select the AV programme position and

start the recording by pressing the appro-

priate button (REC, OTR, etc.).

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Picture format

Opening the menu

Adjusting the picture format ⁴⁾:

• Briefly press the F3 key to open the window with

special picture functions.

• Use the "P+/P-" rocker key to select

the desired function. After selection of

a picture format, you can also adjust

16:9 full picture

Zoom

Standard 4:3

the zoom setting by pressing the

key within five seconds.

—

Standard 4:3

Panorama

16:9 full picture

• The settings made here (except for the

automatic zoom set in the TV menu)

remain active until you switch to a dif-

ferent programme position or switch

off the TV set.

Zoom / Picture position ⁴⁾

After selecting the function "Zoom", you

—

Panorama

16:9 full picture

Zoom

—

can adjust the zoom factor with the

key. In addition, you can move the picture position

up and down on the screen in order, for example,

to keep the station logo or the subtitles visible. To

change the picture position4), press and hold the F3

key until the selection is displayed. Then press

numeric key

ᕢ

and use the "P+/P-" rocker key to

move the picture.

Standard 4:3 ⁴)

This is the standard setting for all programmes in

the 4:3 picture format.

Panorama ⁴⁾

With the aid of the panorama function, you can

expand programmes broadcast in 4:3 format to

fill the screen of a 16:9 TV set. The picture is

expanded uniformly in the horizontal direction.

You can also zoom the picture. The panorama

function can be activated and deactivated in the

menu item "General picture settings" of the menu

"Picture and sound".

16:9 Full picture ⁴⁾

This function serves to display pictures from exter-

nal devices (such as a 16:9 video recorder) with

the correct aspect ratio.

4) This menu item is available

only on 16:9 TV sets.

Download from Www.Somanuals.com. All Manuals Search And Download.

18. Special Functions

Picture Position

Adjusting the picture position ⁴⁾:

Opening the menu

• Press the F3 key until the window "Special func-

tions 3" appears on the screen.

Special functions 3

• Press numeric key ᕢ to select the func-

tion "Picture position vertical".

1 Picture format

2 Pic. form. vertikal⁴⁾

• You can now use the

key to move

the picture up and down on the screen

so that, for example, the station logo or

the subtitles are visible.

4 Comb filter off

This setting is not saved. If you

ꢀ

wish to save it as a global setting,

use the procedure described in

Section 11 to set it.

4) This menu item is available

only on 16:9 TV sets.

18. Special Functions

Comb Filter

Opening the menu

Activating the comb filter:

• Press the F3 key until the window "Special func-

tions 3" appears on the screen.

Special functions 3

• Press numeric key ᕤ to select the func-

tion "Comb filter ".

1 Picture format

2 Pic. form. vertikal⁴⁾

• You can now use the

key to switch

the comb filter on and off.

4 Comb filter off

This setting is not saved. If you

ꢀ

wish to save it as a global setting,

use the procedure described in

Section 11.1 to set it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 18.1 Programming the Function Keys

The remote control has four function keys: F1, F2,

F3 and AV. You can programme these function

keys with any of the available functions.

Special functions 2

If you press and hold any function key, a

window with the available functions is

displayed. The picture on the left shows

the functions available for the F2 key.

1 Normal/Speech

Programming function key F1,

F2, F3 or AV with a function

• Press the "MENU" key to open the TV

menu.

9 Timer overview

0 Direct recording

• Press the red key

tion" menu.

to open the "Configura-

• Press and hold the F1 key to display the availa-

ble functions.

• Use the cursor control key ̄̆ or the correspon-

ding numeric keys to select the desired "Func-

tion for.." (in this example: F2).

• Press the "OK" key and then use the cursor con-

trol key to select one of the available functions.

• Press the "OK" key to assign this function to the

selected function key (the selected function is

marked with "X").

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

• Press the "EXIT" key to close the TV

menu.

If a function key is programmed

with a function, this function can

ꢀ

DVB-T

Analog-TV

Country

Language

Operating

Direct recording

be called by briefly pressing the

function key. Pressing and hol-

ding the function key displays a

list of all available functions.

Timer overview

Language of prog

Normal/Speech

✗

select

save and

clear.

Function for F2

Timer overview

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

19. Sound Settings

Mute Function

Opening the menu

In the menu "Sound settings", you can activate a

two-stage mute function.

When this function is active, the volume in TV

mode can be reduced in two stages with the mute

key

Activating the mute function

• Press the "MENU" key to open the TV menu.

ᕣ

• Press the red key

tion" menu.

to open the "Configura-

• Press the "OK" key to move to the right side of

the menu.

Function for F3

Function for F2

Function for F1

EURO sockets

• Use the cursor control key ̆ or the

corresponding numeric key (in the

example: (») to select the menu item

"Sound settings".

EPG settings

Display configuration²⁾

Operating

Sound settings

HiFi output²⁾

DVB-C

DVB-T

Analog-TV

Country

Language

Operating

• In the setting window, use the

key

to set the function "Mute (2-stage)" to

"On".

Init. prog.position

–

Change with

• Press the "OK" key to save the setting.

Accept value with

Mute (two-stage) on Sound via

Loudsp.

• Press the "EXIT" key to close the TV

menu.

In normal TV mode, the mute key

used as follows:

• Press it once to reduce the volume by 12 scale

divisions.

EXIT

• Press it again within five seconds to reduce the

volume to "00".

• Pressing the

key once again restores the

volume to its original level.

Download from Www.Somanuals.com. All Manuals Search And Download.

20. EPG

EPG is an Electronic Program Guide containing

programme information for all important stations.

It is broadcast by various stations (in Germany by

Kabel1 and RTL 2) and also includes the data for

the other TV stations in the country.

The TV set needs about 30 minutes to initially

download the large amount of data.

• On TV sets with two tuners, the EPG data are

downloaded with the aid of the second tuner

(see the next page). Once the data have been

downloaded, the TV set stores the EPG in a spe-

cial memory.

The EPG in this memory is updated regularly, pro-

viding the TV set is not switched off with the main

power switch.

• On TV sets with only one tuner:

- the EPG programme position must remain selec-

ted for at least 30 minutes, or

- the data are downloaded at night (02:30 -

03:00) when the TV set is in standby mode.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

20.1 Activating the EPG

Opening the menu

The EPG function can be activated by briefly pres-

sing the "EPG" key if an EPG programme position

has been defined in the menu (see below). If no

EPG programme position has been defined in the

menu, the following applies.

EPG

When any programme position on which EPG can

be received is selected, the following is displayed

after a short delay:

Use this station as EPG station ?

ꢀ

Yes

Any other key closes this window.

The TV set is thus asking whether you want to use

this station as the source for the EPG data.

ᕦ

If you press any key other than the green

key, this programme position is not used

as the source of EPG data. The message

will be displayed again on any other

programme position where the EPG

data are available.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

EPG settings

Display configuration²⁾

Operating

Sound settings

HiFi output²⁾

If you press the green key

for "Yes",

Language

Operating

this programme position will be used as

the source for the EPG data. The messa-

ge will not be displayed for any other

programme positions.

Init. prog.position

–

Change with

EPG

Yes

Accept value with

EPG prog. position 13

Kabel 1

If you know which programme position

provides EPG data, you can enter its number in

the TV menu with the numeric keys.

You can also overwrite an existing programme

position number or clear it with the II key.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

20.2 Collecting EPG Data

The Electronic Programme Guides are

• Press numeric key · to delete the

mark (x) at the beginning of the line

"Include station in EPG".

broadcast by several different stations,

and the information is therefore present-

ed in various layouts. You can thus choo-

se between different EPGs with different

appearances.

• If you wish to exclude further stations

from the EPG, use the cursor control

keys ̇ ̈ ̄̆ to select each station

and repeat the above step.

• TV set with a single tuner: select the

EPG programme position and leave it

selected for 30 minutes

The data collection operation is interrup-

ted if:

• TV set with two tuners: the TV set col-

lects the EPG data with the aid of the

second tuner.

- the Teletext function is called;

- a recording is programmed in the

menu "AV recording";

Special notes:

- a "timer recording” is active or will

start within one hour;

All stations which are found by a station

search are displayed in the station table

and also listed in the EPG. Stations

which carry two different programmes at

different times of the day must be stored

in two programme positions (see Section

24).

- the Teletext function "Subtitles" is acti-

vated.

If you switch the TV set to the standby

state during the data-collection opera-

tion, the green LED lights or "EPG" is

displayed to indicate that data collection

is still running.

You can select which stations are to be

listed in the EPG.

Normally, the data for all stations are

collected and displayed. If you wish to

exclude certain stations from the EPG,

proceed as follows:

• Press the "MENU" key to open the TV

menu.

• Press the white key

to display the

menu station table with the active pro-

gramme position marked.

• Press the F2 key to enable editing of

the station table.

• Press the cursor control key ̈ to move

to the subjects list.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

20.3 Using the EPG

Opening the menu

Once all of the EPG data have been collected,

briefly pressing the "EPG" key displays the EPG

with the current programme on the selected pro-

gramme position highlighted.

EPG

The following keys have special functions in EPG

mode:

Select a programme.

View the selected programme or set a

reminder for it.

Scroll to earlier or later pro-

grammes.

0-9

Enter a time for display of the

programmes starting at or after

this time.

Back to the previous program-

me of the selected station.

Show all following programmes

of the selected station.

Forward to the following pro-

gramme of the selected station.

blue: Select all programmes.

yellow: Programme selection on the basis of the

selected user and his interests.

white: User can set interests.

green: Select user

(father, mother, teenager, child).

red:

Make the selected programme available

for recording (see page 53).

EXIT

EXIT: Back to the TV picture.

– +: Scroll by days trough the EPG.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

20.3 Using the EPG

Selecting a programme and viewing

or setting a reminder

In the EPG, you can select a programme with the

cursor control key.

• Press the "OK" key in order to

- view the programme if it is already running, or

set a reminder for it if it has not yet started. A

green check mark is displayed after the start time.

• Press the "TEXT" key to display and hide a des-

cription of the programme.

This may not be possible for some programmes.

Setting a user profile

By pressing the green key several times, it is possi-

ble to set up the EPG for the current user (father,

mother, teenager, child).

✗

winter sport

water sport

Setting interests

Arts

motor sport

athletics

team sport

tennis/squash

football/soccer

sports magazin

special events

sport (general)

Each user can set up the EPG to reflect

his or her special interests.

Education

Children/School

Sport

Leicure

Shows

Current affairs

Feature film

✗

• Press the white key

• Use the cursor control key or the cor-

responding numeric key to select one

of the subjects.

Up to 9 subjects

can be selected.

detectiv

comedy

magazine

documentary football/soccer

game/quiz/contest motor sports

• Use the cursor control key ̈ to move

to the other side.

tourism/travel

winter sports

• Use the cursor control key or the corresponding

numeric keys to select one of the subjects and

mark X it by pressing the "OK" key.

Up to nine subjects of interest can be mar-

ked for each user.

ꢀ

• You can delete a mark X by pressing the "OK"

key again.

• Press the red key

to save the selections.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

20.3 Using the EPG

Recording a Programme

Opening the menu

Selecting a programme for recording:

If you have a video recorder with the dialogue

system, the EPG permits you to start a recording

by pressing a single key.

EPG

• Press the "EPG" key to open the EPG.

• Use the cursor control key to select the program-

me you wish to record.

If a video recorder with

dialogue system is connected

(see also Section 25):

Recording

Reminder

Yes

- Switch on the video recorder.

Hessen 3

Date

Start

End

01.05.

11:15

12:00

- Insert a cassette.

- Press the red key

control.

on the remote

VPS

Recording device

Videorecorder

If a normal video recorder is

connected:

–

Change with

:select

:save the timer

- Switch on the video recorder.

- Insert a cassette.

- Press the red key

on the remote control to

programme the TV timer

(see also "Direct recording (OTR)").

- On the AV programme position of the video

recorder, programme a timer with the data and

time of the programme which will be provided

by the TV timer.

Not possible with an external receiver !

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 21. Setting the

Country and Language

The menu items "Language" and "Country"

are not available in a 2 ** menu.

ꢀ

Selecting the language in the TV menu

You can select any of the available languages for

the TV menu. All texts in the menu and in the help

screen (Information) are then displayed in the

selected language.

Setting the country

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

After installation of the TV set, you must

enter the country in which it is installed

(such as Great Britain) in order to

assign certain basic settings (such as

the channel assignments, the order in

Nederlands

Français

Español

Italiano

which the stations are stored, etc.).

✗

English

Deutsch

Language

Operating

Setting language and country:

• Press the "MENU" key to open the TV

menu.

:select

^OK:save

Selected language English

• Press the red key

to open the

menu "Configuration".

• Use the corresponding numeric keys

to select "Language" or "Country".

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

Luxemburg

Italy

Great Britain

France

• Press the "OK" key and then use the

cursor control key to select the des-

ired language or country.

✗

Finland

Germany

Denmark

Belgium

Baltic states

Australia

• Press the "OK" key to confirm your

selection.

Language

Operating

• Press the "EXIT" key to close the

TV menu.

:select.

:save.

Selected country Great Britain

The menu language can also be

ꢀ

selected in the help screen (Infor-

mation) by selecting the corre-

sponding national flag.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

22. Setting Stations

Opening the menu

Setting the reception mode

This TV set is capable of operating in three diffe-

rent reception modes:

Analogue TV:

The broadcasting technology which has been used

for many years. The signals can be received via a

rooftop antenna or a cable.

DVB-T:

The new digital broadcasting technology whose

signals can be received via an existing (analogue)

rooftop antenna or an indoor antenna (depending

on the strength of the available signal). For more

details, please consult your local TV dealer or

search for “DVB-T” in the Internet.

DVB-C:

The new digital broadcasting technology whose

signals are received via a cable connection. For

further details, please consult your local cable

provider or TV dealer or search for “DVB-C” in

the Internet.

ᕤ ᕥ ᕦ

Select the reception mode to match the broadcas-

ting technology available in your area.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

Setting the reception mode

• Press the "MENU" key to open the TV

menu.

General settings

Manuall search

Automatic search

Search settings

Antenna

DVB-T

Analog-TV

Country

Language

Operating

• Press the red key

"Configuration".

to open the menu

• Use the corresponding numeric key to

select the appropriate reception mode

"Analogue TV", "DVB-T" or "DVB-C".

Change with the

numeric keys or

–

. Accept

Start station search

value with

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.1 Setting Stations

Opening the menu

TV-Standard for analogue stations

Various TV standards for picture and sound are

used in different countries. If the wrong TV stan-

dard is selected, you will not be able to hear the

sound, or it will be distorted. The TV standard "L"

also uses a different standard for transmission of

the picture. The TV standard must therefore be set

before you execute a station search.

ᕤ

The TV set is set in the factory to the TV standard

B/G.

Setting the TV standard ²⁾

• Press the "MENU" key to open the

TV menu.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

• Press the red key ® to open the menu

"Configuration".

• Use the corresponding numeric key

(in the example: ¿) to select "Analo-

gue TV".

Terr. station search

Search settings

Language

Operating

–

Change with

Accept value with

TV standard²⁾B/G

• The menu item "Search settings" is

already selected.

• Press the "OK" key and, in the setting window,

use the

key to select the desired TV standard.

• Press the "OK" key to confirm your selection.

EXIT

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.1 Setting Stations

Analogue TV

Opening the menu

Terrestrial station search

The terrestrial station search automatically sear-

ches the entire range of available reception fre-

quencies for stations. All stations which are found

are placed in the station table which is displayed

at the end of the search operation. If you are not

satisfied with the order in which the stations are

displayed, you can move them to other positions

or delete unwanted stations

ᕤ

(see Section 24., "Sorting stations".

Executing a terrestrial station search

• Press the "MENU" key to open the TV menu.

• Press the red key

to open the

menu "Configuration".

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

• Use the corresponding numeric key

(in the example: (¿) to select

"Analogue TV".

• Use the corresponding numeric key (in

the example: (·) to select

"Terr. station search".

DVB-T

Analog-TV

Country

Language

Operating

Terr. station search

Search settings

• Press the "OK" key and, in the setting

window, confirm the menu item

"Start station search" by pressing the

"OK" key.

Start station

search with

Start station search

• The TV set starts to search for available stations.

A station table with the newly found stations is

displayed on the left half of the screen. If a sta-

tion table already existed before the search, the

newly found stations are automatically appen-

ded after the last existing station.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• After completion of the search, all stations which

have been found are sorted.

• You can delete any unwanted stations from the

station table by selecting them with the cursor

control key and pressing the II key.

2) Possible only on sets equipped with this

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.1 Setting Stations

Opening the menu

Colour standard for analogue stations

The TV set will normally detect the colour standard

(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)

automatically.

If this automatic selection does not provide satis-

factory results (which should happen only rarely),

you can select the colour standard manually for

each programme position.

The colour standard is set in the factory to "Auto-

matic".

Setting the colour standard

• Press the "MENU" key to open the TV menu.

ᕥ

• Press the white key

station table.

to open the

0076 TF3

0075 TF2

0074 TF1

0073 TV France

• Press the F2 key to enable editing of

the station table.

0072 RTL 2

0071 RTL

0070 SAT 1

0069 Bayern 3

0068 ZDF

Sound corrections

Colour standard

Picture quality

Picture correct.

Enter logo

• Use the cursor control key to select

the programme position whose colour

standard you wish to change.

0067 ARD

Frequency/channel

• Press the cursor control key ̈ to

: select

move to the left column.

:go to the

settings

Colour standard SECAM

• Use the corresponding numeric key

(in the example: ´) to select

"Colour standard".

• Use the

key to select the desired colour stan-

dard, or to step through the available colour

standards until the picture is displayed clearly.

• Press the "OK" key to confirm your selection.

EXIT

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.2 Setting Stations

Opening the menu

Automatic DVB-T station search

DVB-T station search

The DVB-T station search operation searches the

entire frequency band for TV and radio stations.

All stations which are found are placed in separa-

te TV and radio station tables. See Section 29. for

details of DVB radio mode.

If you are not satisfied with the order in which the

stations are displayed, you can move them to

other positions or delete unwanted stations (see

Section 24., "Sorting stations".

ᕥ

ᕣ

Executing the automatic station search

• Press the "MENU" key to open the TV menu.

• Press the red key

"Configuration".

• Use the corresponding numeric key (in

the example: ´) to select " DVB-T".

to open the menu

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

• In the setting window "Antenna", you

can switch the supply voltage for an

General settings

Manuall search

Automatic search

Search settings

Antenna

antenna on or off with the

key.

Normal setting = Off !

Language

Operating

The setting "On" may be used only if

you have an active indoor antenna

which needs a supply voltage for its

internal amplifier.

Change with the

numeric keys or

–

. Accept

Start stadion search

value with

• Use the corresponding numeric key (in

the example: ·) to select "Search set-

tings".

• In the setting window, use the

one of the following:

key to select

All = search for all stations.

FTA only = search for only unencrypted

(free-to-air) stations.

FTA +CICAM = search for FTA stations and sta-

tions which can be decoded with a CI module

(accessory).

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

• Press the "OK" key and use the corresponding

numeric key (in the example: ») to select

"Automatic search".

• Press the "OK" key to start the search. The TV

set now searches for available stations.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.2 Setting Stations

Opening the menu

Manual DVB-T station search

For a manual station search, you must know the

channel number or the frequency of the station

you wish to find.

Executing the manual search

• Press the "MENU" key to open the TV menu.

• Press the red key

guration".

to open the menu "Confi-

ᕥ

ᕤ

• Use the corresponding numeric key (in the

example: ´) to select " DVB-T".

• In the setting window "Antenna", you can switch

the supply voltage for an antenna on or off with

the - + key (see also page 59).

• Use the corresponding numeric key

(in the example: ·) to select "search

settings".

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

• In the setting window, use the - + key

to select "All", "FTA only" or "FTA +

CICAM" (see also page 59).

General settings

Manuall search

Automatic search

Search settings

• Press the "OK" key and use the cor-

responding numeric key (in the exam-

ple: ¿) to select "Manual search".

Language

Operating

Antenna

–

Change with

Channel

05 Frequency177.500 Mhz

Accept value with

• In the setting window, use the nume-

ric keys to enter the channel number

or the frequency.

Mod.-Parameter auto. Start station search

If you know further data of the desired

Transmission

Modulation64 QAM

Mod. Parameter

8k Mode

station, select the menu item "Mod. parameter"

and use the

key to change the setting there to

manuell

"Manual". You can then enter further data.

• After input of the station data, use the cursor

control key to select the menu item "Station

search" and press the "OK" key to confirm your

selection.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

The station settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.3 Setting Stations

Opening the menu

Automatic DVB-C station search

DVB-C station search

The DVB-C station search operation searches the

entire frequency band for TV and radio stations.

All stations which are found are placed in separa-

te TV and radio station tables. See Section 29 for

details of DVB radio mode.

If you are not satisfied with the order in which the

stations are displayed, you can move them to

other positions or delete unwanted stations (see

Section 24., "Sorting stations".

Executing the automatic search

• Press the "MENU" key to open the TV menu.

• Press the red key

guration".

to open the menu "Confi-

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

• Press the numeric key ² to select

"DVB-C".

• The cursor is now on the menu line

"Search settings".

General settings

Manuall search

Automatic search

Search settings

•

Press the "OK" key and, in the setting

window, use the

key to select "All",

Language

Operating

"FTA only" or "FTA +CICAM" (see also

page 59).

Start station

search with

Symbolrate 1

Symbolrate 2

Symbolrate 3

6900

• Press the "OK" key and then press the

corresponding numeric key (in the

example: ·) to select "Automatic

search". The cursor is now on the line "Symbol

rate 1".

6875 Start station search

6111

The most common symbol rates are preset

ꢀ

in the factory. It is not normally necessary

to change these. If the available symbol

rates do not provide satisfactory results, a

different symbol rate must be set (ask your

cable provider for details).

• Press the cursor control key ̈ to select the menu

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

line "Start station search".

• Press the "OK" key to start the search. The TV

set now searches for available stations.

Download from Www.Somanuals.com. All Manuals Search And Download.

22.3 Setting Stations

Opening the menu

Manual DVB-C station search

For a manual station search, you must know the

channel number or the frequency of the station

you wish to find.

Executing the manual search

• Press the "MENU" key to open the TV menu.

• Press the red key

"Configuration".

to open the menu

ᕦ

• Use the corresponding numeric key

(in the example: ᕦ) to select

"DVB-C".

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

• The cursor is on the menu line

"Search settings".

DVB-T

General settings

Manuall search

Automatic search

Search settings

• Press the "OK" key and, in the setting

Analog-TV

Country

Language

Operating

window, use the

key to select

"All", "FTA only" or "FTA +CICAM"

(see also page 59).

Change with the

Channel

04 Cable channel

6900

numeric keys or

• Press the "OK" key and use the cor-

responding numeric key (in the

example: ») to select "Manual

search".

–

. Accept

Frequency 64.500 Mhz Symbol rate

value with

Modulation Auto.mode Start station search

Channel

04 Cable channel

6900

• The cursor points to "Channel".

Frequency 64.500 Mhz Symbol rate

Modulation128 QAM Start station search

• In the setting window, use the numeric keys to

enter the channel number (or special channel

number) or the frequency of the desired station.

If you know further data of the desired station,

select the menu items "Modulation" and "Symbol

ᕣ

rate" and use the

key or the numeric keys to

change the settings there.

• After input of the station data, use the cursor

control key to select the menu item "Station

search" and press the "OK" key to confirm your

selection.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

The station settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

23. Station Logo

Opening the menu

With the aid of the VPS signal, a station logo with

a maximum length of 15 characters is automati-

cally assigned to each station.

If this automatic assignment does not work, or if

you want to use a different logo, you can change

the setting manually.

Setting the station logo

• Press the "MENU" key.

• Press the white key

table”.

to open the “station

• Press the F2 key to enable editing of the station

table.

ᕢ

• Select the programme position whose logo you

wish to change.

• Press the cursor control key ̈ to

0010 Hessen 3

move to the other column.

0009 Südwest

0008 MDR

0007 PRO 7

0006 RTL 2

0005 RTL

• Use the corresponding numeric key

(in the example: ·) to select

"Logo input".

Sound corrections

Colour standard

Picture quality

Picture correct.

Enter logo

0004 SAT 1

0003 Bayern 3

0002 ZDF

• The various letters and digits can be

selected with the aid of the cursor

control key ̇ ̈.

0001 ARD

Frequency/channel

–

:clear all

• You can delete single characters with

the red key or the complete logo with

the II key.

delete character

ᕡ _ , ; ᕢ ABC ᕣ DEF

:select position

:save

ᕤ GHI ᕥ JKL ᕦ MNO MDR

PQRSᕨ TUV ᕩ WXYZ

ᕧ

:abort

• Set the desired logo by repeatedly pressing the

various numeric keys. The lowercase letters are

displayed after the uppercase letters.

• Press the "OK" key to save the new logo.

EXIT

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

24. Sorting Stations

You can move, copy and delete individual stations

or groups of stations within the station table.

Moving, copying and deleting stations

• Press the "MENU" key to open the TV menu.

• Press the white key

to open the station table.

• Use the cursor control key to select the pro-

gramme position which is to be moved, copied

or deleted. You can also mark a contiguous

block of positions by moving the cursor to the

programme position at the end of the block.

• Briefly press the OK key to mark the programme

position (in the example: position 008). Press

and hold the OK key to mark all programme

positions in the previously selected block.

• To copy this programme position, use

0010 Hessen 3

0009 Südwest

0008 MDR

0020 BR alpha

0019 3 SAT

the cursor to select the programme

position before or after which the

selected station is to be inserted. If the

station(s) you have selected were pre-

viously in programme positions with

lower numbers than the insertion

position, they are inserted before this

position; if they previously had higher

numbers, they are inserted after this

position.

0018 Kinderkan.

0017 FRANKEN

0016 TELE-5

0015 9LIVE

0014 SuperRTL

0013 Kabel 1

0012 VOX

0007 PRO 7

0006 RTL 2

0005 RTL

0004 SAT 1

0003 Bayern 3

0002 ZDF

0001 ARD

0011 West 3

: select

^F2:edit

Moving, copying, deleting:

programme

attributes or

station list.

Select station withOK (hold down to select a block)

Select new position with the cursor

–

:move/copy,

:delete

• To move the selected station(s), select

the programme position to which the

station(s( is/are to be moved.

• Use the

tion(s).

key to copy (+) or move (-) the sta-

• To delete a station, press the ll key.

• Press the "EXIT" key to close the TV menu.

EXIT

Download from Www.Somanuals.com. All Manuals Search And Download.

25. Registering AV Devices Opening the menu

AV (audio/video) devices are external devices

which deliver video and/or audio signals (such

as video recorders, DVD players, DVD recorders,

etc.) and which can be connected to TV sets.

All commonly available AV devices are listed in

the menu "AV devices".

Note that you must always connect AV

devices exactly as shown in the connection

diagram in the TV menu of your TV set !

ꢀ

ᕢ

SVHS/Hi8 and Data Logic video recorders must

always be connected to the EURO1 socket of the

TV set.

In the factory, the EURO1 socket is programmed

for a video recorder and the EURO2

socket is programmed for a DVD player.

HiFi-Amplifier

AV-Receiver

Other device 2

Other device 1

Registering an AV device

on the TV set

Satellit / set top

DVD Player 2

DVD Player 1

DVD/Videorec.2

DVD/Videorec.1

• Press the "MENU" key to open the TV

DataLogic

Name

Signal types

Connect

menu.

• Press the yellow key

menu "AV devices".

to open the

✗

:select

^OK:connect

and clear..

Connect as follows:

• Use the cursor control key to select the

AV device you wish to register and

press the "OK" key.

➔

VCR

➔

• Press numeric key · and use the

key to

select the appropriate signal types (OUT/IN) for

this device and press "OK" to confirm your

selection. For details of the signal types, see the

operating instructions for the AV device being

connected.

EXIT

• If desired, press numeric key », enter a diffe-

rent name for this AV device and press "OK".

Caution! Connection of

a new device may cau-

se an existing connec-

tion diagram to be

ꢀ

• Use the cursor control key to select "Connect"

and press the "OK" key. Then connect the AV

device to the corresponding EURO socket.

changed. If so, you

must reconnect the AV

devices accordingly.

Download from Www.Somanuals.com. All Manuals Search And Download.

25. Registering AV Devices

Data Logic

Data Logic video recorder

"Data Logic" is a system which provides a dialo-

gue between a TV set and a video recorder. This

"intelligent" system offers the features such as:

Opening the menu

This menu item is not avai-

ꢀ

lable in a 2 ** menu.

- Automatic transfer of the settings for terrestrial or

cable TV stations (not DVB) to the video recorder.

- Immediate recording - the video recorder

records the programme currently displayed on

the TV screen.

- Automatic switching to the AV programme posi-

tion.

- Direct control of the video recorder from the

timer menu of the TV set.

- Automatic switching off of the video recorder

when the TV set is switched to the standby state.

In the menu "AV devices" check X to the left of the

field "Data Logic" for "Video recorder 1" and

connect the video recorder to the EURO1 socket.

ᕢ

Data Logic will function correctly only if the

ꢀ

AV-1 socket on the video recorder is con-

nected to the EURO 1 socket on the TV set.

Comparable dialogue systems are: QLink (Pan-

asonic), EasyLink (Philips), Megalogic (Grundig),

SMARTLINK (Sony).

HiFi-Amplifier

Registering a Data Logic video

recorder on the TV set

• Press the "MENU" key to open the TV

menu.

AV-Receiver

Other device 2

Other device 1

Satellit / set top

DVD Player 2

DVD Player 1

DVD/Videorec.2

DVD/Videorec.1

DataLogic

✗

• Press the yellow key

menu "AV devices".

to open the

Name

Signal types

Connect

• Use the cursor control key to select

the AV device to be connected and

press the "OK" key.

:select

Connect as follows:

CVBS

^OK:connect

and clear.

➔

VCR

VBS

➔

DVD/Videorec.1 CVBS

EURO1

Download from Www.Somanuals.com. All Manuals Search And Download.

25. Registering AV Devices

Data Logic

Opening the menu

• Press numeric key ·, use the - + key to select

the correct signal types (OUT/IN) and press the

"OK" key.

(See also the operating instructions of the

AV device.)

EXIT

• If desired, press numeric key », enter a new

name for the AV device and press the "OK" key.

• Use the cursor control key to select "Data

Logic" and press the "OK" key.

• Use the cursor control key to select "Connect"

and press the "OK" key. Then connect the AV

device to the corresponding EURO socket.

Data Logic: transferring the station table

• Press the "MENU" key to open the TV menu.

ᕤ

• Press the red key

guration".

to open the menu "Confi-

ᕢ

• Press numeric key ¿ to select "Analogue TV".

• Press the "OK" key and then press numeric key

· to select "Data Logic".

• Press the "OK" key to transfer the pro-

gramme positions from the TV set to

the video recorder.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

Data Logic

Terr. station search

Language

Operating

–

Change with

Start data transfer

with

Start data transfer Programme position ---

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

25. Registering AV Devices

Opening the menu

Setting the signal types

This menu item is not available in a 2 **

ꢀ

menu.

Some AV devices may use a composite video sig-

nal (FBAS) for recording and playback operations

and an RGB signal for displaying their menus.

It is not possible to make a general statement in

this respect. The operating instructions of the AV

device concerned may provide some indication.

If you connect such an AV device with the signal

type "composite video" (FBAS) and recordings are

played back correctly, but you cannot see the

menu of the AV device, you must change the sig-

nal type in the menu "AV devices" to "RGB".

ᕢ

Setting the signal type

• Press the "MENU" key to open the TV menu.

• Press the yellow key

menu "AV devices".

to open the

HiFi-Amplifier

AV-Receiver

Other device 2

Other device 1

Satellit / set top

DVD Player 2

DVD Player 1

DVD/Videorec.2

• Use the cursor control key to select

the AV device whose signal type you

wish to change and press the "OK"

key.

DataLogic

Name

Signal types

Connect

• Press numeric key ·, use the cursor

control key to select " Signal OUT",

and use the - + key to change the set-

ting to " RGB".

DVD/Videorec.1

✗

–

Change with

Accept value with

Signal IN

CVBS Signal OUT RGB

• Press the "OK" key to confirm your

selection.

• Press the "EXIT" key to close the TV menu.

EXIT

Caution ! This may cause an existing con-

nection diagram to be modified. If so, you

must reconnect the AV devices accordingly.

ꢀ

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

25.1 Removing AV Devices

Opening the menu

This menu item is not available in a 2 **

menu.

ꢀ

If desired, you can change the factory settings for

AV devices (a video recorder on the EURO1

socket and a DVD player on the EURO2 socket).

Removing an AV device from the TV set

• Press the "MENU" key to open the TV menu.

• Press the yellow key

devices".

to open the menu "AV

• Use the cursor control key to select

the device you wish to remove and

press the "OK" key.

HiFi-Amplifier

AV-Receiver

Other device 2

Other device 1

Satellit / set top

DVD Player 2

DVD Player 1

The cursor is on the line "Connect".

• Press the "OK" key again. A messa-

ge is displayed, asking if you really

want to change the connected device.

DataLogic

Name

Signal types

Connect

DVD/Videorec.2

DVD/Videorec.1

• Press the OK key again to remove the

connected device.

:select

^OK:connect

and clear..

Connect as follows:

VCR

• Press the "EXIT" key to close the TV

menu.

DVD/Videorec.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu 26. Initial Programme Position

You can define an initial programme position in

this TV set. This initial programme position is used

primarily to select the AV programme position if

you use an external receiver.

Setting the initial programme position

This menu item is not available in a 2 **

menu.

ꢀ

Select a receiver (satellite or set-top box) in the

menu "AV devices" and connect the receiver to the

TV set (see also Section 25, Registering AV Devi-

ces").

• Press the "AV" key.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

• Use the numeric keys to select the

position "Sat/Set-top" in the AV menu.

EPG settings

• Press the "MENU" key to open the TV

menu.

Display configuration²⁾

DVB-T

Analog-TV

Country

Language

Operating

Sound settings

• Press the red key

"Configuration".

to open the menu

HiFi output²⁾

Init. prog.position

–

Change with

• Use the cursor control key to select

"Operation" and then "Initial pro-

gramme position".

Accept value with

Switch on with this station? Yes

• Press the "OK" key and, in the setting window,

use the

key to select "Yes".

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

The AV programme position will now be

selected automatically when you switch on

the TV set with the main power switch.

ꢀ

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Download from Www.Somanuals.com. All Manuals Search And Download.

27. Sound via HiFi Amplifier

HiFi output

On the rear of the TV set, you will find audio

sockets and a digital audio-out socket (see page

80) which can be used to connect the TV set to a

HiFi system (HiFi amplifier).

Opening the menu

Settings need to be made in the menu items "HiFi

output" and "Sound settings" only if the TV set is

connected to a HiFi system.

If you want adjust the sound settings exclusively on

the HiFi system, you must set the HiFi output to

constant.

ᕢ

You can then no longer adjust the volume and

tone with the Metz remote control. The

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

mute

function remains active.

If you want to be able to change the

sound settings with the Metz remote con-

trol, you must set the HiFi output to vari-

able.

EPG settings

Display configuration²⁾

Operating

Sound settings

HiFi output²⁾

Init. prog.position

Language

Operating

Setting the HiFi output

• Press the "MENU" key to open the TV

menu.

–

Change with

Accept value with

HiFi output constant

Output level

50%

• Press the red key

"Configuration".

to open the menu

• Use the cursor control key ̈ to select

"Initial programme position".

• Use the corresponding numeric key (in the

example: ·) to select " HiFi output".

EXIT

• In the setting window, use the

desired parameters.

key to set the

• Press the "OK" key to save the new settings.

• Press the "EXIT" key to close the TV menu.

In normal TV Mode, the function "Sound via..."

can be activated temporarily by pressing the yel-

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

low key

and using the

key.

Download from Www.Somanuals.com. All Manuals Search And Download.

27. Sound via HiFi Amplifier

HiFi output

Opening the menu

On the rear of the TV set, you will find audio

sockets and a digital audio-out socket (see page

80) which can be used to connect the TV set to a

HiFi system (HiFi amplifier).

If you wish to play back the sound only via a HiFi

system (HiFi amplifier) which is connected with the

aid of a Cinch cable, you must select the function

"Sound via HiFi".

ᕣ

If you wish to play back the sound only via a HiFi

system (HiFi amplifier) which is connected with the

aid of an optical audio cable ("Toslink", available

as an accessory), the following settings

should not be made.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

Setting sound via HiFi

• Press the "MENU" key to open the TV

menu.

EPG settings

Display configuration²⁾

Operating

• Press the red key

menu "Configuration".

to open the

Sound settings

HiFi output²⁾

Init. prog.position

Language

Operating

• Press the "OK" key to move to the

right-hand column.

–

Change with

accept value with

Mute (two-stage) off Sound via

HiFi

• Use the cursor control key ̆ or the

corresponding numeric key (in the

example: ») to select "Sound set-

tings".

• In the setting window, use the cursor control key

̈ to select the menu item "Sound via…".

EXIT

• Use the

key to select "Sound via HiFi".

• Press the "OK" key to save the new setting.

• Press the "EXIT" key to close the TV menu.

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

In normal TV Mode, the function "Sound via..."

can be activated temporarily by pressing the yel-

low key

and using the

key.

2) Possible only on sets equipped with this

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

28. Display Configuration

Opening the menu

This menu item is not available in a 2 **

menu.

ꢀ

The green digital display on the front of the TV set

can be programmed, as desired, to show the time

or the current programme position.

Setting the display configuration ²⁾

• Press the "MENU" key to open the TV menu.

• Press the red key ® to open the menu "Configu-

ration".

ᕥ

• Use the cursor control key

programme position".

to select "Initial

• Use the corresponding numeric key (in

the example: ´) to select "Display

configuration".

Function for F3

Function for F2

Function for F1

EURO sockets

EPG settings

Display configuration²⁾

Operating

Sound settings

HiFi output²⁾

DVB-C

DVB-T

Analog-TV

Country

Language

Operating

• In the setting window, use the

to select the desired setting.

key

• Press the "OK" key to save the new

setting.

Init. prog.position

• Press the "EXIT" key to close the TV

menu.

–

Change with

Accept value with

Display brightness 3 Permanent display Time

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

29. DVB Radio Mode

To switch from TV mode to DVB radio mode, press

the "R" key.

To switch from DVB radio mode to TV mode, press

the "TV" key.

Setting DVB radio stations

The available DVB radio stations are automatical-

ly detected during a station search (see Section

22) and stored in a separate station table at the

operating level for radio mode.

The radio station table can be sorted (see Section

24) and the station logos can be changed (see

Section 23).

DVB radio stations are administered in the

ꢀ

same basic way as DVB TV stations.

The functions described in Sections 12,

12.1, 15 to 17.2 and 18 (Special functions,

Normal/speech, Timer overview and Direct

recording) are also available for radio sta-

tions.

Download from Www.Somanuals.com. All Manuals Search And Download.

30. Scope of Operation

The adjustable scope of operation for the TV set

can be a great help in finding your way around

the complex operating functions of the TV set.

The scope of operation can be set to various

levels, which are identified by asterisks.

ꢀ ꢀ ꢀ

"Just watching TV"- in other words, it is

not possible to open the TV menu and

only the functions available on the

remote control can be used:

- Zapping

- Selection of programme positions with the nume-

ric keys, the oval "P+/P-" rocker key or the

white key

- Opening Teletext.

- Displaying help information (INFO).

- Playing back films from a video recorder or DVD

player by pressing the "AV" key.

- Selecting "Special functions 1" by pressing the

F1 key.

- Selecting "Special functions 2" by pressing the

F2 key.

- Selecting "Special functions 3" by pressing the

F3 key.

- Selecting connected AV devices by pressing the

"AV" key.

- Calling the standard picture functions by pres-

sing the blue key

- Calling the standard sound functions by pressing

the yellow key

- Calling the "EPG" function with the "EPG" key.

ꢀ

If the scope of operation is set to a 1 menu and

you subsequently want to open a menu, then:

• Press and hold the "MENU" key for at least five

seconds to open the TV menu.

• The menu item "Operation" is automatically

selected.

Download from Www.Somanuals.com. All Manuals Search And Download.

Opening the menu

30. Scope of Operation

• Use the - + key to select the desired scope of

operation and press the "OK" key to save the

new setting.

ꢀ ꢀ ꢀ

This menu permits you to configure the

use of the TV set to a certain degree.

All of the functions listed for the 1

ꢀ

menu are available and are supple-

mented by the following functions:

- Childlock

- Timer control (sleep timer)

- Automatic station search

- Transfer of the TV station table from the TV set to

a Data Logic video recorder.

- Editing functions in the station table

ꢀ ꢀ ꢀ

This is the operating scope

for persons who are interes-

ted in technology who want

to be able to use the full

range of functions of the TV

set.

Function for F3

Function for F2

Function for F1

EURO sockets

DVB-C

DVB-T

Analog-TV

Country

EPG settings

Display configuration²⁾

Operating

Sound settings

HiFi output²⁾

Init. prog.position

Setting the scope of operation

• Press the "MENU" key to open the

TV menu.

Language

Operating

–

Change with

accept value with

Operation

full

• Press the red key

to open the

menu "Configuration".

• Use the cursor control key ̈ to move to the

menu line "Initial programme position".

• Press the numeric key ¿ to select "Scope of

operation".

• In the setting window, use the

the desired scope of operation.

key to select

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

Press the "OK" key to save the new setting.

Press the "EXIT" key to close the TV menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

31. Operation without the

Remote Control

Operation without the remote control is provided

as an emergency measure in case the batteries of

your remote control are exhausted or the remote

control is not readily available.

The local controls (see also Section 35) are loca-

ted behind the flap on the front of the TV set.

To open the flap ...

... pull it open with your fingernail or

... press on the point marked •••.

Switching on

Press the main power switch on the TV set. After

about five seconds, the TV set is switched on with

programme position 1 or the programmed initial

programme position selected.

You can also use the following functions directly

on the TV set, without a remote control. For func-

tions which require further adjustments, the func-

tion remains preselected for ten seconds.

Programme selection:

Press the -/+ buttons.

Volume:

Press and hold the preselection key F or

until the bar display for the volume appears on the

screen. Then press the "-" or "+" button to adjust

the volume.

Contrast:

Press and hold the preselection key F or

until the bar display for the contrast appears on

the screen. Then press the "-" or "+" button to

adjust the contrast.

Download from Www.Somanuals.com. All Manuals Search And Download.

32. Connecting Headphones

The headphone socket is located behind the flap

on the front of the TV set. Open the flap as descri-

bed in sections 31 and 35.

We recommend the use of headphones with an

impedance of at least 32 Ω. The use of headpho-

nes with a lower impedance will reduce the dyna-

mic range of the sound.

You can save the headphone volume as a stan-

dard value.

33. Sound 1, Sound 2

When receiving a dual-language pro-

gramme, you can switch between the

two sound channels.

In TV mode, press and hold the yellow

key

until the sound function "Sound

mode" is selected.

Headph. Vol.

Sound mode Channel 2

Spatial

Then use the

or Sound 2.

key to select Sound 1

Spatial

Sound mode Channel 2

Balance

34. Cleaning the TV Set

Before cleaning the TV set, always switch it

off with the main power switch!

ꢀ

Clean the case of the TV set with a soft dry cloth.

If necessary, you can moisten the cloth slightly. Do

not use aggressive detergents or solvents, since

these may damage the paintwork and the inscrip-

tions. Clean the screen with a moist window leat-

her.

Download from Www.Somanuals.com. All Manuals Search And Download.

35. Connections on the Front of the Set

Astral, Mondial, Spectral

ꢂ

ቤ

ባ ꢁ

Bristol

ቤ

ꢂ ባ ꢁ

ꢁ Headphone socket, diameter 3.5 mm

ባ S-VHS or. Y/C in (e.g. camcorder)

ቤ Audio in R/L (e.g. camcorder)

ꢂ FBAS/Video in (e.g. digital camera or camcorder)

Download from Www.Somanuals.com. All Manuals Search And Download.

35.1 Connections on the Rear of the Set

Service socket for

use by your dealer

Slot for a CI module with

card slot (only if installed)

DVB-S antenna socket

(only if DVB-S is installed)

Antenna socket

EURO sockets for

connection of external

AV devices

Digital audio output

(AC3)

Cinch audio output

The digital audio signal (AC3) provided by

the set can be connected to external devices

with the aid of an optical audio cable ("Tos-

link", available as an accessory).

ꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

36. Copying between AV Devices

Direct recording

Opening the menu

If you wish to copy a recording from one of the

AV devices connected to your TV set (such as a

DVD player) to another connected AV device (such

as a video recorder), you must do this by means

of a direct recording operation. In this case, the

signal arriving at one of the EURO sockets is redi-

rected to the other EURO socket, from where it

can be recorded.

ᕢ

Example: you have a DVD player and a video

recorder connected to the

EURO sockets of the TV set

(see Section 25).

Programming a direct recording

for copying:

• Press the "AV" key and use the corres-

ponding numeric key to select the DVD

player (playback device).

2 DVD-Player

1 Videorecor-

der

• Press the F2 key.

Select with ᕪ...ᕩ

Briefly pressing F2 executes the func-

tion which is programmed for this

function key (see Section 18.1, "Programming

function keys").

Pressing and holding F2 for about three seconds

displays all functions available for this function

key.

Confirm with

ᕪ

• Press numeric key ᕪ to open the

timer menu. The timer window dis-

plays the AV programme position

(DVD player), the current date and a

time window of two hours.

Recording

Reminder

Yes

SAT 1

Date

Start

End

01.05.

22:45

23:40

• If two hours is insufficient for the

copying operation, use the numeric

keys to enter a later end time.

VPS

Recording device

Videorecorder

• Use the cursor control key ̄ to select

the line "Recording device".

If only one such device exists, it is

–

Change with

:select

:save the timer

Download from Www.Somanuals.com. All Manuals Search And Download.

36. Copying between AV Devices

Direct recording

then displayed. If further recording devices

exist, you can select the desired device with the

aid of

the

key.

• Press the "OK" key to save the settings.

• On the playback device (in this example, the

DVD player) start the film which is to be copied.

• On the recording device (in this example, the

video recorder), select the AV programme posi-

tion (in most cases AV1).

• On the recording device, start a direct recor-

ding by pressing the appropriate button (REC or

OTR, etc.).

The TV set is now set up so that the signal coming

from the playback device is connected directly to

the recording device.

Download from Www.Somanuals.com. All Manuals Search And Download.

37. Setting the Picture Format Opening the menu

Some of the following menu items are not

available on a 2 ** menu.

ꢀ

Setting the picture format:

• Select the AV programme position which deli-

vers the picture by pressing the "AV" key and

then pressing the numeric key corresponding to

the device you want to use.

ᕪ

• Press the "MENU" key. The TV menu appears on

the screen.

• Press the blue key

to open the menu "Picture

and sound". The menu item "General picture

settings" is preselected.

Picture format²⁾³⁾

Progressive²⁾³⁾

Comb filter²⁾³⁾

Zoom/Panorama²⁾³⁾

CTI³⁾

• Press numeric key · to select the

menu item "Pict. settings for Pr.".

• Use the corresponding numeric key (in

the example: ᕪ) to select the function

"Picture format".

Comb filter

Noise reduction³⁾

Picture sharpness

Colour intensity

Contrast

Sound set,.prog.pos

Sound settings, gen.

Pict.set.,prog.posn.

Pict. settings, gen.

• Use the

key to set the picture for-

mat setting to "Automatic".

–

Change with

Accept value with.

• Press the "OK" key to save the new

setting.

Picture format Automatic

• Press the "EXIT" key to close the TV

menu.

EXIT

The number of subjects and sections depends

on the selected scope of operation. Depending

on the configuration of the TV set, the various

menu items may be displayed in a different

order and numbered differently.

2) Possible only on sets equipped with this

function.

3) See glossary for an explanation.

Download from Www.Somanuals.com. All Manuals Search And Download.

38. Glossary

Automatic zoom

When the automatic zoom function is active, pro-

grammes broadcast in "widescreen format" (such

as those in the 16:9 format) are expanded to fill

as much of the screen as possible.

If this function is inactive, the format of such pro-

grammes is not adjusted automatically.

AV programme position

AV devices have one or more connection sockets,

depending on the model. The designations of the-

se sockets are marked on the device (e.g. AV1).

On the AV device, you can select which socket

you want to use. The selected socket is shown on

the display of the AV device (e.g. A1 for socket

AV1).

Code

The settings for the childlock function are protec-

ted by a four-digit code: you can enter any des-

ired code, but you should note it for future use. If

you have forgotten your code, please consult your

local dealer.

Comb filter ²⁾

In conventional TV sets, the brightness signal is

separated from the colour information with the aid

of a frequency filter.

However, such a filter cannot prevent a certain

amount of the brightness signal from being mixed

with the colour signal, causing interference (so-

called cross-luminance interference). Similarly a

certain amount of the colour signal is mixed with

the brightness signal (so-called cross-colour inter-

ference). The comb filter does away with these

shortcomings. Just like a comb, it extracts the

colour signal (which is carried in the gaps of the

brightness signal) without affecting the bandwidth

of the brightness signal.

2) Possible only on sets equipped with this

function.

Download from Www.Somanuals.com. All Manuals Search And Download.

38. Glossary

The result is a TV picture with the highest possible

resolution, without any cross-colour or cross-lumi-

nance interference.

CTI

The CTI (Colour Transient Improvement) circuit is

an electronic circuit which provides a perfect tran-

sition between neighbouring areas of different

colours on the screen and prevents "smudging" of

the colours. This function is effective for both TV

signals and signals from AV devices.

Forced mono

It may happen that your TV set switches to stereo

mode although the programme you are watching

is not broadcast with stereo sound. This is normal-

ly due to the local reception conditions. If you set

the selected programme position to "forced mono"

all programmes received at this programme posi-

tion are reproduced with mono sound.

Noise reduction

This function allows you to improve the picture

quality of "snowy" pictures which result from poor

reception conditions. Various levels of noise

reduction can be selected and the settings can be

made separately for each programme position.

Panorama ²⁾

The panorama function can be used to expand

"normal" TV programmes broadcast in the 4:3

format to fill the full width of a 16:9 screen. This is

done by expanding the picture width accordingly.

Picture position, vertical

With widescreen films, subtitles are sometimes

transmitted in the black area at the bottom of the

screen. You can move the picture upwards on the

screen to ensure that these subtitles remain visible.

2) Possible only on sets equipped

with this function.

Download from Www.Somanuals.com. All Manuals Search And Download.

38. Glossary

Progressive scan

This function serves to improve the apparent

sharpness and contrast, particularly for films play-

ed back from DVD players connected via YUV

(see page 68). In normal TV mode, the progressi-

ve scan should be set to "Automatic".

Rotation ²⁾

With this function, you can compensate for the

effects of the Earth's magnetic field, which may

cause the picture to be "tilted" (horizontal lines in

the picture are not parallel with the edges of the

screen).

Standard values

The standard values are the settings (such as

brightness, sound volume, colour, etc.) which are

the same for all programme positions.

Spatial sound

This function can be used to create an artificial

stereo effect for programmes with sound in mono.

Stereo wide

For stereo broadcasts, the distance between the

speakers can be increased artificially in order to

achieve a wider stereo effect.

SRS-WOW ²⁾

WOW is an audio system developed by SRS

Labs, Inc. which provides a unique listening expe-

rience. The sound becomes fuller and the bass is

deeper and more voluminous.

Activation of the WOW function allows you to

hear a lot of spatial and environmental audio

information which is lost in normal stereo mode.

In normal TV mode, the WOW function can be

preselected by pressing the yellow key

and

2) Possible only on sets equipped

with this function.

then switched on and off with the

key.

Download from Www.Somanuals.com. All Manuals Search And Download.

38. Glossary

Is a registered trade mark

of SRS Labs, Inc.

The SRS WOW technology is used by Metz under

a licence from SRS Labs, Inc.

Tone settings

The tone can be set to either "Normal" or

"Speech". In the setting "Speech", the bass and

treble components of the sound signal are set to

make speech as easy to understand as possible.

The setting "Normal" is recommended for music

programmes.

VCR

The VCR function provides an optimal picture qua-

lity when playing back recordings from tape devi-

ces such as camcorders or video recorders.

Volume correction

The various stations broadcast their sound at diffe-

rent volumes. The TV set can automatically com-

pensate for these differences in the volume. This

function remains active even if the standard sound

settings are recalled.

Download from Www.Somanuals.com. All Manuals Search And Download.

39. Technical Data

Mains voltage:

230 VAC, 50/60 Hz

Antenna input:

75 Ohms, unbalanced DIN 45325

Channel coverage:

Standard channels 2 - 12, 21 - 69

Special channels S1 - S20, S21 - S41,

S42 ... S46 (Belgium channels OIR)

Power consumption

Astral-72

Bristol-72

2 x 8 W

(2 x 12 W)

136 W

145 W

2 x 12 W + 24W

(2 x 8 W + 16 W)

Spectral-72

Bristol-82

2 x 12 W

(2 x 8 W)

2 x 15 W

(2 x 10 W)

Mondial-82

Energy consumption per hour (Wh):

Multiply the power consumption in W by 1 hour

Stand-by:

1.7 W

Download from Www.Somanuals.com. All Manuals Search And Download.

40. Upgrade Kits

• DVB-S digital upgrade kit 028 NM 1115

For the reception of digital TV and radio stations

broadcast via satellites. The DVB upgrade kit is

installed in the TV set, which means that no exter-

nal remote control is needed.

• CI module 030 NM 1013

For decoding encrypted TV and radio stations.

Ask your local dealer about any further upgrade

kits.

You can also find further information on our

homepage: www.metz.de.

Download from Www.Somanuals.com. All Manuals Search And Download.

41. Basic differences between analog terrestrial

reception and DVB-T

Information for our dealers and interes-

ted customers.

If two of the numbers in a block are

changed, the receiver can detect that an

error has occurred, but any attempt to

correct this would have the wrong result.

In order to understand how the beha-

viour of DVB-T receivers differs from that

of the analog terrestrial receivers used

until now, two things are important: digi-

tal transmission and the simultaneous

broadcasting network.

Example:

If the information 0 is encoded as 000

and is received as 101, the receiver

would assume that this should have been

111 and will then decode it, incorrectly,

as 1.

Digital transmission

A DVB transmitter does not transmit only

a single programme, but a set of pro-

grammes – normally six to eight. The

information for each programme – the

picture, the sound and teletext – is con-

verted into a digital format, i.e. into

numerical values which are grouped

together in packets. The packets of the

various programmes are then transmit-

ted sequentially in a so-called transport

stream.

To sum up:

several programmes are transmitted by

a single transmitter in the form of digital

packets. Additional information is trans-

mitted to permit complete correction of a

certain number of transmission errors.

Simultaneous broadcasting

network

For DVB-T, the programmes are not

transmitted on a modulated carrier fre-

quency; instead, one channel with a

width of 8 MHz contains 8,192 individu-

al carrier frequencies.

Further information which permits the

receiver to detect and correct any errors

which occur during transmission is

added to this transport stream.

Example:

If the information 0 or 1 is to be trans-

mitted, the 0 could be encoded as 000

and the 1 as 111. If one of the three

digits numbers is falsified during trans-

mission, i.e. the receiver receives, for

example, 010 instead of 000, the recei-

ver can decide that the presence of at

least two zeros indicates that the inten-

ded information value was 0 and, cor-

respondingly, that at least two ones indi-

cates the information 1.

Some of the signals reaching the receiver

come directly from the transmitter, others

are signals which have been reflected

from obstacles in the vicinity and some

are even those transmitted by other

transmitters. Normally, these signals

reinforce each other. In extreme cases,

however, if they are out of phase and

have the same amplitude, the signals

can cancel each other out:

Download from Www.Somanuals.com. All Manuals Search And Download.

41. Basic differences between analog terrestrial

reception and DVB-T

The signals may also have come from a

different transmitter.

Addition

In such cases, the reception quality

depends not only on the actual signal

strength, but also on how many carrier

frequencies are cancelled out.

Such problems can often be corrected by

Cancellation

adjusting the position and the alignment

of the antenna. In general, moving the

antenna a few centimetres to one side,

or tilting or turning the antenna, can

improve reception far more than the use

of an additional antenna amplifier.

In most cases, only a few of the 8,192

carrier frequencies will be fully cancelled

out and the information which is lost can

be reconstructed by the error-correction

function of the receiver. Reception beco-

mes impossible only if very strong reflec-

tions cause the loss of too many carrier

frequencies.

Simply moving the antenna a few

centimetres to one side can often

cause the signals to be added

together instead of cancelling each

other out.

ꢀ

The phase relationship between two sig-

nals depends on the path taken by these

signals on their way to the receiver.

If a rooftop antenna is used, almost all of

the signals reach the receiver by the

same path.

If an indoor antenna is used, the signals

reaching the receiver may have been

reflected from

- objects outside the building,

- objects such as thermally insulated

windows (coated with metal films),

- reinforced-concrete parts of the

building,

- persons in the vicinity or

- the furnishings of the room.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Possible cause

Remedy

TV set does not react • No line of sight between the

• Remove any obstacles

between the units.

to commands from

the remote control

remote control and the TV set.

• Prevent sunlight from

shining on the set.

• Sunlight is shining directly on

the infrared window of the TV

set.

• Replace the batteries.

• Batteries of the remote control

are exhausted.

• Switch on the TV set

with the main power

switch.

• TV set has been switched off

with the main power switch.

• Switch off the TV set

with the main power

switch, wait a few

seconds and then switch

it on again.

• Fault in the internal processor.

Incorrect colours,

coloured areas at

edge of screen

• A strong magnetic field from

loudspeakers or other devices

in the vicinity.

• Move the loudspeakers

away from the TV set.

•

If there are still coloured

areas, switch off the TV set

with the main power switch

wait a few seconds and

then switch it on again.

The message "Enter • The childlock is active and was • Enter the code you used

code" is displayed

when the TV set is

switched on.

programmed to disable all

stations.

when programming the

childlock.

The TV set will not

switch to a selected

programme position.

A teddy bear is dis-

played instead.

• The childlock is active and was • Enter the code you used

programmed so that only the

stations shown in the list beside

the teddy bear may be selec-

ted.

when programming the

childlock.

You have switched

off the TV set with

• EPG data are currently being

collected from the programmed

EPG station.

• None. When all data

have been collected, the

TV set will switch itself

off automatically.

the

key, but the

green LED remains

on.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Possible cause

Remedy

Direct recording of an • The Data Logic video recorder • Connect the Data Logic

analogue terrestrial

station (received via

roof antenna or

cable) with Data Logic

does not work.

is not connected to the roof

antenna or cable outlet with a

suitable cable.

video recorder to the

roof antenna or cable

outlet with a suitable

cable.

General problems

with an external AV

device connected to

the TV set.

• The AV device has not been

registered in the TV set.

• Open the menu "AV

devices", select the devi-

ce with the cursor, set

the signal types

(OUT/IN) correctly and

press the "OK" key.

Make sure that you con-

nect the AV device as

shown in the connection

diagram.

Data Logic does not • The Data Logic video recorder • Open the menu "AV

work.

with data transfer has not been

registered correctly.

devices" and register

the Data Logic video

recorder as video recor-

der 1 with "Data Logic

On".

• The Data Logic video recorder

is not connected to the EURO 1

socket.

• Connect the Data Logic

video recorder to the

EURO1 socket with a

Scart cable.

• Use a Scart cable in

which all pins are con-

nected through.

• The Scart cable does not have

all pins connected through.

Download from Www.Somanuals.com. All Manuals Search And Download.

Problem

Possible cause

Remedy

A film in 16:9 format • The picture format for this pro- • Select the AV program-

is played back from

an AV device, but is

displayed in 4:3 for-

mat.

gramme position has not been

set correctly in the TV menu.

me position and set the

picture format to 16:9

or "Automatic" (see Sec-

tion 37).

The menu of a con-

nected AV device

(such as a DVD play- signal type "Composite video".

er) is not visible on

• The AV device has been regis- • Register the AV device

tered in the TV menu with the

with the signal type

"RGB" (see page 68).

the TV screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Additional devices (see AV devices)

Automatic station search . . . . . . . . . . . . . 56-62

Automatic zoom . . . . . . . . . . . . . . . . . . . . . . 32

AV devices, connecting/registering . . . . . . . . 65

AV devices, removing . . . . . . . . . . . . . . . . . . 65

AV programme position . . . . . . . . . . . . . . . . 16

AV playback, devices with switching voltage . 15

AV playback, devices without switching voltage. 16

Batteries for the remote control. . . . . . . . . . . . . 6

Brightness . . . . . . . . . . . . . . . . . . . . . . . . . 7,18

Camcorder, connecting. . . . . . . . . . . . . . . 65,79

Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Childlock, activating . . . . . . . . . . . . . . . . . . . 34

Childlock, deactivating . . . . . . . . . . . . . . . . . 34

Childlock, permitted programmes. . . . . . . . . . 34

Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Code for childlock. . . . . . . . . . . . . . . . . . . . . 34

Colour standard . . . . . . . . . . . . . . . . . . . 31,58

Comb filter . . . . . . . . . . . . . . . . . . . . . . . 20,45

Connections on front and rear of set . . . . . 79,80

Copying recordings . . . . . . . . . . . . . . . . . . . 81

Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

CTI function . . . . . . . . . . . . . . . . . . . . . . . . . 20

DataLogic video recorder . . . . . . . . . . . . . 66,67

Decoder (D-Box), connecting . . . . . . . . . . . . . 65

Direct recording (OTR) . . . . . . . . . . . . . . . . . 43

Double font size . . . . . . . . . . . . . . . . . . . . . . 13

DVD player, connecting . . . . . . . . . . . . . . 65,66

DVD player, removing. . . . . . . . . . . . . . . . . . 69

Electronic Programme Guide = EPG . . . . . . . . 48

EPG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

EURO sockets . . . . . . . . . . . . . . . . . . . . . 15,80

External devices (playback) . . . . . . . . . . . 15,16

External devices, connecting . . . . . . . . 65,79,80

Font size, double . . . . . . . . . . . . . . . . . . . . . 13

Forced mono . . . . . . . . . . . . . . . . . . . . . . . . 29

Freeze frame . . . . . . . . . . . . . . . . . . . . . . . . . 7

Function keys. . . . . . . . . . . . . . . . . . . . . . . 7,48

Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

Headphones. . . . . . . . . . . . . . . . . . . . . . . . . 78

Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

HiFi output . . . . . . . . . . . . . . . . . . . . . . . 71,72

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Info (Information) (see Help). . . . . . . . . . . . . . 10

Initial programme position. . . . . . . . . . . . . . . 70

Interests (see EPG). . . . . . . . . . . . . . . . . . . . . 52

Language for TV menu . . . . . . . . . . . . . . . . . 55

Marks in Teletext, clearing . . . . . . . . . . . . . . . 14

Marks in Teletext, overview . . . . . . . . . . . . . . 14

Marks in Teletext, scrolling by . . . . . . . . . . . . 13

Marks in Teletext, setting . . . . . . . . . . . . . . . . 13

Menu language . . . . . . . . . . . . . . . . . . . . . . 55

Menu, menu control . . . . . . . . . . . . . . . . . . . 11

Multiple pages, sub-pages. . . . . . . . . . . . . . . 12

Noise reduction . . . . . . . . . . . . . . . . . . . . . . 18

Off time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

On time . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Operating mode. . . . . . . . . . . . . . . . . . . . . . . 8

Panorama ²⁾. . . . . . . . . . . . . . . . . . . . . . 19,44

Picture format. . . . . . . . . . . . . . . . . . . . . . . . 44

Picture position . . . . . . . . . . . . . . . . . . . . . . . 45

Picture quality from video recorder (see VCR) ... 17

Picture settings. . . . . . . . . . . . . . . . . 8,18,22,23

Picture sharpness . . . . . . . . . . . . . . . . . . . . . 18

Playing back from external devices. . . . 15,16,81

Premiere decoder - see AV device

Programme guide (see EPG) . . . . . . . . . . . . . 48

Programme switching for AV devices . . . . . . . . 9

Progressive. . . . . . . . . . . . . . . . . . . . . . . . . . 20

Radio mode with DVB. . . . . . . . . . . . . . . . . . 74

Reception type . . . . . . . . . . . . . . . . . . . . . . . 55

Recording with the EPG. . . . . . . . . . . . . . . . . 53

Reminder . . . . . . . . . . . . . . . . . . . . . . . . 35,52

Riddle key . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Signal type (Euro sockets) . . . . . . . . . . . . . . . 68

Sleep timer (see Off time) . . . . . . . . . . . . . . . 36

Sound 1, Sound 2. . . . . . . . . . . . . . . . . . . . . 78

Sound corrections . . . . . . . . . . . . . . . . . . . . . 30

Sound effects, see Stereo wide or Spatial sound .

Sound settings . . . . . . . . . . . . . . . . . . . . . . 8,24

Spatial sound (see sound settings) . . . . . . . . . 24

SRS-WOW . . . . . . . . . . . . . . . . . . . . . . . . . 25

Standard picture settings (see standard settings)18

Standard settings . . . . . . . . . . . . . . . . . . . . . 18

Standard sound settings . . . . . . . . . . . . . . . . 24

Station logo . . . . . . . . . . . . . . . . . . . . . . . . . 63

Possible only on sets equipped

with this function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Station search, automatic . . . . . . . . . . 57,59,61

Station search, manual . . . . . . . . . . . . 57,60,62

Station selection . . . . . . . . . . . . . . . . . . . . . . 48

Station table. . . . . . . . . . . . . . . . . . . . . . . . . 15

Stations, deleting . . . . . . . . . . . . . . . . . . . . . 64

Stations, moving . . . . . . . . . . . . . . . . . . . . . . 64

Stations, moving, copying and deleting . . . . . 7,9

Stations, sorting . . . . . . . . . . . . . . . . . . . . . . 64

Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . . 24

Summer time (see time settings) . . . . . . . . . . . 37

Switching off . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switching on . . . . . . . . . . . . . . . . . . . . . . . . . 8

Switching voltage, devices with . . . . . . . . . . . 15

Switching voltage, devices without . . . . . . . . . 16

Thunderstorms . . . . . . . . . . . . . . . . . . . . . . . . 5

Timer control . . . . . . . . . . . . . . . . . . . . . . . . 36

Timer, clearing . . . . . . . . . . . . . . . . . . . . . . . 42

Timer, setting manually . . . . . . . . . . . . . . . . . 41

Tone settings (see Sound settings) . . . . . . . . . . 28

TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TV standard . . . . . . . . . . . . . . . . . . . . . . . . . 56

VCR function . . . . . . . . . . . . . . . . . . . . . . . . 17

Video recorder, connecting . . . . . . . . . . . . . . 65

Video recorder, picture quality (see VCR function)

Video recorder, programme switching . . . . . . 15

Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Teletext, clearing marks . . . . . . . . . . . . . . . . . 14

Teletext, font size. . . . . . . . . . . . . . . . . . . . . . 13

Teletext, overview of marks . . . . . . . . . . . . . . 14

Teletext, scrolling by marks . . . . . . . . . . . . . . 13

Teletext, setting marks . . . . . . . . . . . . . . . . . . 13

Volume correction. . . . . . . . . . . . . . . . . . . . . 27

Volume correction, automatic. . . . . . . . . . . . . 26

Winter time . . . . . . . . . . . . . . . . . . . . . . . . . 37

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . 19,44

Download from Www.Somanuals.com. All Manuals Search And Download.

✍

Download from Www.Somanuals.com. All Manuals Search And Download.

✍

Your Metz product was developed and manufactured with high-quality materials and components

which can be recycled and/or re-used.

This symbol indicates that electrical and electronic equipment must be disposed of separately

from normal garbage at the end of its operational lifetime.

Please dispose of this product by bringing it to your local collection point or recycling centre for

such equipment.

This will help to protect the environment in which we all live.

Errors excepted. Subject to changes !

Download from Www.Somanuals.com. All Manuals Search And Download.

ᕢ

ᕣ

ᕤ

ᕢ

ᕣ

ᕤ

ᕥ

ᕦ

ᕧ

Service Centre

Training Centre

Administration and development

Storage/Dispatch

Mecablitz production

TV production

ᕥ

ᕧ

ᕦ

Plastics technology

Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg

Core competence in the areas of electronics and plastics

technology to form the basis of the excellent reputation of the

Metz Werke that has been built up throughout the world over

a period of many decades.

Metz offers quality made in Germany:

Consumer electronics, mecablitz flash units,

plastics technology and industrial electronics.

Metz-Werke GmbH & Co. KG

Postfach 1267, D-90506 Zirndorf

Fon: +49 911 - 97060

Fax: +49 911 - 9706340

www.metz.de

[email protected]

Errors excepted. Subject to changes.

Printed in Germany

Metz - always first class.

Download from Www.Somanuals.com. All Manuals Search And Download.

Kuma Stoves Indoor Fireplace Tamarack Pedestal User Manual
Lennox Hearth Bluetooth Headset JX10 CARA User Manual
Lightolier Indoor Furnishings 1050SQIN_3D User Manual
Lincoln Electric Welding Consumables Welding Fume Control User Manual
LST Smoke Alarm 16589 User Manual
Makita Saw 5104 User Manual
Manitowoc Ice Ice Maker E 1100 User Manual
Mellerware Fryer 2 7 5 5 01500W User Manual
Memorex CD Player MX5520SPKA User Manual
Memorex Paper Shredder MPS1500 User Manual