Spectral-55
Astral-63
MF
MF
55TK68
63TK63
Nordkap-70 BM
70T 73
L
Spectral-70
Linea-72
MF
SF
70TH90
72TK67
70TL67
72TK79
72TK87
82TK91
Linea-70
SF
Astral-72
Kreta-72
MF
SF
Spectral-82
Astral-82
MF
SF
82TH95
Operating instructions
603 47 2013.A3
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Installation
• Take care that no bright artificial light or sunshi-
ne falls directly on the screen. This could cause
reflections which have a negative effect on the
brilliance of the picture.
5x cm
• The optimum viewing distance is about
five times the screen diagonal dimen-
sion. For TV sets with a 70 cm screen, it
is thus about 3.5 metres.
y
• The antenna cable and any other components
(such as a video recorder) connected between
the antenna socket in the wall and the TV set
must comply with the European standard
EN 60966-2-4.
• There may be no magnetic fields in the immedi-
ate vicinity of the TV set. Keep loudspeaker
boxes well away from the set.
• The antenna cable used for connecting the TV
set must have a screening attenuation of at least
75 dB.
• The use of non-approved cables will invalidate
the operating permission for the TV set.
• For details of how to connect peripheral devices
such as video recorders, DVD players, etc. press
the „INFO“ key to call the help function, select
„Connecting AV devices“ with the cursor and
press „OK“ to display the information.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Safety notes
• Always place the monitor on a solid, stable sur-
face.
• If a cold TV set is moved to a warm room,
always allow any condensation on the screen to
evaporate before switching it on.
• The TV set is intended for use in a dry room. If,
in exceptional circumstances, you use it out-
doors, take care that is protected against moi-
sture (rain, splashed water, dew).
• TV sets need adequate ventilation. Never cover
the openings on the rear of the set with curtains,
doilies, newspapers, etc. Also take care that the
slits in the bottom of the case are freely accessi-
ble so that the intake of the cooling air is not
hindered.
• If you place the TV set in a wall unit,
leave sufficient space on all sides for the
circulation of cooling air.
y
• Do not place the TV set close to a radia-
tor, since this would effect adequate
cooling.
• Do not place
burning candles or
vessels containing liquids (vases, etc.)
on top of the TV set, since any hot wax or water
dripping into the set could cause serious damage
to the electronic components and could also jeo-
pardize the electrical safety of the set.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Safety notes
• Lightning can damage electrical equipment. A
lightning flash entering the power cable or the
aerial cable can damage the TV set even if it is
switched off. You should therefore disconnect
the power cable and aerial cable from their out-
lets or from the TV set in the case of a thunder-
storm.
• The monitor may be opened and repaired only
by a qualified person.
CAUTION! HIGH VOLTAGES CAN KILL!
If repairs should be necessary, consult your
local dealer.
• Always switch off the TV set before cleaning it.
• Do not hold the remote control directly in front
of your eyes and press a button. The remote
control emits infrared radiation!
• Do not place rechargeable batteries in the bat-
tery compartment of the remote control.
Use only two 1.5 V dry batteries of the type
LR03/AM4/AAA (Micro).
• The TV set is intended only for the reception and
reproduction of picture and sound signals.
• The TV set may be operated only from a mains
voltage of 230 VAC, 50/60 Hz.
Australia: 240 VAC.
• Lay the power cable so that nothing stands on it
and no-one can trip over it.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remote control unit
The remote control unit transmits com-
mands to the TV set with the aid of
infrared light. You should always point
the remote control unit directly at the TV
set. The remote control unit may possi-
bly interfere with other infrared devices
(such as infrared headphones) within its
range.
Sunlight falling directly on the TV set
may interfere with the operation of the
remote control unit, because the TV set
cannot detect the infrared signals from
it. The TV set must first be switched on
with the main switch before the remote
control unit can be used.
³
ቶ
ት
ባ
ቤ
ᕤ
The most important keys in nor-
ቴ
ታ
ᕥ
mal use
³ ON:
ቧ
ቨ
the last station watched before the set
was switched off is selected.
OFF (standby)
ƻ
ቱ
ƹ
ᕤ Numeric keys (direct station selection)
ᕨ
ᕥ P+ / P-: next/previous programme
position
ቯ
ᕨ Volume control
Also used to change settings in the
menu
ቮ
ቭ
ቪ
ቫ
ƹ Return to previously selected pro-
gramme position
ƻ Display the station table
Never load rechargeable batteries
into the battery compartment of the
remote control unit!
Only use two 1.5V LR03/AM4 batte-
ries, size AAA.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Remote control unit
Overview of key functions
ባ Switch to satellite radio mode
1)
Switch on from standby mode to satellite radio mode
(1) only if a SAT upgrade module is fitted)
ቤ Function keys F1 ... F3
ቧ Cursor control key in the „Information“ and the TV menu
ቨ OK - confirmation key
ᕨ Change settings in the TV menu
ቪ Sound mute
ቫ Call the TV menu
In the menu: return to the previous main menu item
ቭ Call Teletext
ቮ Call the „Information“
In the „Information“: return to the contents
ቯ Frame freeze
In the „AV devices“ menu: delete
ƹ Return to previously selected programme position
In the TV menu: call „Configuration“
ቱ Display date and time
In the TV menu: call „Timer“
ƻ In the TV menu: call the „Station table“ or display station attributes
ታ Call the sound settings
In the TV menu: call „AV devices“
ቴ Call the picture settings
In the TV menu: call „Picture and sound“
ት Return to the TV picture
Switch from satellite radio mode1) to TV mode Switch on from
standby mode to TV mode (1) only if a SAT upgrade module is fitted)
ቶ Call the AV menu for playback and recording
Switch on from standby mode to AV mode
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
4. General operating notes
When designing this TV set, we have tried to
make its operation as easy as possible so that
you will enjoy learning how to use it.
The TV set itself can provide the answers, with the
menu „Information“, to any questions you may
have during installation and switching on.
To use this function, simply press the „INFO“ key
to display the table of contents of the
INFO
„Information“ on the screen.
The menu „Information“ (help function)
In the table of contents, or in the index, you can
then select the information you need with
the cursor control key.
Information
Contents (1/2)
„Cursor right“ ̈: move to next page of the
index.
Index
„Cursor left“ ̇: scroll backwards through
the index.
„Cursor up“ ̆: select the previous underli-
ned text or the arrow -->.
„Cursor down“ ̄: select a line in the list.
Then press the „OK“ key to display this
information.
Programme selection
Pictures settings
Sound settings
AV playback / recording / satellite recording
Teletext
Function keys
>
--
Satellite radio mode
Use the cursor to select an underlined text.
OK: further information
INFO: help index
Previously visited pages: © backwards © forwards
You can select any underlined words in the table
of contents, the index or the explanatory text with
the cursor and press „OK“ in order to display
further information about them.
OK
You can scroll back and forth through previously
selected help pages with the aid of the red and
green keys.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
4. General operating notes
Call the menu
MENU
Using the menus
With the „TV menu“, we help you to find your
way through the many operating functions of
your TV set.
Main menu items
Do not hesitate to try out the options in the
various menus. Any changes you make
become permanently effective only if you
save them by pressing the „OK“ key. If
you are not sure that you want to retain
a new setting, you can simply exit from
the menu by pressing the „TV“ key. The
new setting is then discarded.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Station table
Timer
While you are in the TV menu, you can
return to the main menu item at any time
by pressing the „MENU“ key. If you do
not understand a menu item, press the
„INFO“ key for more information.
To return to the menu, press the „INFO“ key
twice.
Configuration
Coloured keys:
call menü
TV: return to TV
picture
OK
The five main sections of the menu can be opened
with the coloured keys. The help information is
shown in the form of two card files containing the
subjects (blue) and the sections of the
Subjects*
Sections*
Picture pos., vertica
Panorama
selected subject (yellow). You can select
ꢀ
ꢀ
ꢀ
the subjects and sections with the aid of
the red triangular cursor, which is moved
with the oval key.
CTI
Picture-Volume
AV devices
Station table
Timer
Comb filter
Noise reduction
Sound set.prog.po Picture sharpness
Sound settings, gen. Colour intensity
Pict. set.,prog. posn.* Contrast
Pressing the „OK“ key then moves you to
the setting window below the file boxes.
The current setting is displayed here and
Configuration
Pict. settings, gen. Luminance
+
you can change it with the
key.
-
: select
These settings apply to all programme positions.
menu item
To save the new setting, press the „OK“
key. This also returns you to the file of
yellow section cards. If you do not want to save
the new setting, press the „MENU“ key to return
to the related main menu item or press the „TV“
key to exit from the menu.
Cursor
Setting window
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
You can delete your input by pressing the ll key.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Daily operation
Switching on
Switch on the TV set with the main switch. The red
standby indicator lights.
Then enter the desired programme position on the
numeric keys of the remote control unit.
Alternatively, simply press the
key with the TV
set in standby mode to select the programme
position you were watching before the set was
switched off.
If you have defined an initial programme position
(see page 46), pressing the
key with the TV
Ǽ
set in standby mode will select this programme
position.
Switching off
Press the
key to switch the TV set to standby
mode or press the main switch on the TV set to
switch it off completely.
OK
Station selection
You can select a station (programme position) with
the numeric keys, with the rocker key „P+/P-“ or from
the station table.
OK
To call the station table, press the white key
. Use
the cursor control key to select the desired station and
then press the "OK" key to confirm your selection.
Adjusting the volume
You can adjust the volume with the
+
key.
-
Adjusting picture and sound settings
Call the picture settings with the blue key
or
the sound settings with the yellow key
.
At the bottom left of the screen, you will then see
the setting box with the various functions. Select
the desired function with the rocker key „P+/P-“
+
and adjust the setting with the
key.
-
10
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Setting the operating mode
Call the menu
The TV set can be switched on at the desired ope-
rating level with the keys "TV", "AV" and "R".
These keys can also be used to switch between the
operating levels.
TV
AV
R
When the TV set is switched on with one of these
keys, the station which was last selected at this
operating level is again set.
TV = television mode
AV = audio-visual mode for use with AV devices
R = radio mode 1)
(1) available only if a SAT receiver is installed)
5.2 Operating scope
Call the menu
Until we introduce Version 2.1 of the software, this
menu item is available only in the menu. If you
wish to reduce the operating scope of your TV set,
please consult your local Metz dealer.
MENU
The operating scope of the TV set is indicated by
asterisks in the menus and can be reduced in two
stages in order to prevent inadvertent changing of
certain settings.
OK
Programming the operating scope
(Software version V2.1 or higher)
• Press the "MENU" key to open the TV
menu.
ꢀ
ꢀ
ꢀ
Operation
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
• Press the red key
"Configuration".
• Use the cursor control key to select
"Operation".
• Press the "OK" key and then use the
cursor control key to select "Opera-
ting".
to open the menu
Picture-Volume
AV devices
Station table
Timer
Scope of operation
EPG settings
Automatic zoom
Init. prog. position
Display configuration
Configuration
Language*
: select menu
item
Scope of operation
full
ꢀ
ꢀ
ꢀ
•
Press the "OK" key and then, in the setting
window, select the desired operating scope
+
with the
key.
-
11
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Operating scope
ꢁ ꢁ ꢁ The full TV menu is displayed
ꢁ ꢁ A reduced TV menu is displayed. The follo-
wing functions are no longer available:
- Special picture settings such as panorama, CTI,
noise reduction, picture sharpness, etc.
- Special sound settings such as stereo wide, spati-
al sound, balance, tone settings, etc.
- Picture and sound settings for individual pro-
gramme positions.
- Programming of the function keys.
- Settings for the EURO sockets.
- Special functions in the menu "Operation".
ꢁ The TV menu cannot be opened, Only the stan-
dard functions of the remote control are availa-
ble.
• Save the changed setting by pressing the "OK"
key.
If you want to open a menu although only the ope-
rating scope with one asterisk is active, then:
• Press and hold the "MENU" key for at least five
seconds to open the TV menu.
• The menu item "Operation" is automatically
selected.
+
• Use the
key to select the desired operating
-
scope and press the "OK" key to save the chan-
ged setting.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Setting the language and country
Call the menu
In a menu with two asterisks (**), the set-
tings for the menu items "Language" and
"Country" cannot be changed.
ꢀ
MENU
Setting the language for the TV menu
You can select one of the available languages for
the display of the TV menu. All texts in the menu
and in the help function (Information) are then
displayed in the selected language.
OK
Setting the country
After installing the TV set, you must select the
country where it is installed (such as Great Bri-
tain). This information is used by the TV
set to make certain basic settings (such
as the channel spacing, the sorting
ꢀ
ꢀ
ꢀ
Operation
sequence for the stations, etc.).
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Nederlands
Français
Español
Italiano
Setting the language and country:
•
Press the "MENU" key to open the TV
menu.
English
Configuration
Language*
Deutsch
• Press the red key
"Configuration".
to open the menu
: select
menu item
Selected language English
• Use the cursor control key to select the
desired language and your country.
• Use the cursor control key to select the desired
language and your country.
Italy
Great Britain
France
• Press the "OK" key to save the settings.
ꢀ
ꢀ
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
• Press the "TV" key to close the menu.
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Finland
Germany
Denmark
Belgium
Baltic states
Australia
Configuration
Language*
: select
menu item
Selected country Australia
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
7. Programming stations
You can programme the TV stations in three diffe-
rent ways.
MENU
a) Automatic station search
The automatic station search function searches the
entire range of reception frequencies for TV stations.
All stations which are found are placed in a station
table, which is displayed at the end of the search
operation. If you are not satisfied with the order in
which the stations are stored, you can shift or delete
stations (see Section 9, "Sorting stations").
OK
Executing an automatic station search
• Press the „MENU“ key to call the TV menu
• Press the red key
to open the
„Configuration“ menu.
ꢀ
ꢀ
ꢀ
• Use the cursor control key to select
"Automatic station search" and press
the "OK" key.
• If your TV set has the appropriate
option2), you can select the desired
Operation
Function for F3*
Function for F1*
Picture-Volume
AV devices
Station table EURO sockets*
Station search
Country*
Language*
Timer
DataLogic
Terr. station search
+
TV standard with the
key in the
-
Configuration
setting window (in this example, the
standard B/G is selected).
: select
menu item
TV standard B/G
Station search (START)
• Use the cursor control key > to select
the menu item "Station search
(START)" and press the "OK" key to
confirm your selection.
• A station table containing all stations which are
found is displayed on the left side of the screen.
• At the end of the search, all stations which were
found are sorted and displayed.
• To delete any unwanted stations, select them
with the cursor and press the II key.
• To save the stations, press the "OK" key and
enter, with the numeric keys, the number of the
programme position where the first station is to
be saved. The remaining stations are saved in
the following programme positions.
2) Available only on TV sets
which are equipped with this
option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Programming stations
Call the menu
b) Station search
The station search function permits you to search
for specific stations if you do not know their chan-
nel number or frequency.
MENU
Executing a station search
• Press the „MENU“ key to display the TV menu.
• Press the white key
table.
to display the station
• Move the cursor to en empty programme posi-
tion (or to a position containing a station you
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.
OK
• In the setting window which is then
009 MDR
Decoder
Sound correction
displayed, move the cursor to
008 SW 3
ꢀ
ꢀ
ꢀ
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
Picture-Volume
AV devices
Station table
Timer
„Search“.
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Frequency/channel
TV Standard2)
+
• Press the
key to start the search.
-
• The search stops when the first station
is found.
• If you want to save this station, press
the „OK“ key.
Configuration
: select
001 ARD
Channel
6
Cable channel
--
menu item
• If you do not want to save this station,
Frequency 182.31 MHz
Scan operation
ARD
+
press the
search.
key again to continue the
-
c) Direct channel input
You can programme a station directly by entering
its channel number with the numeric keys (you
must, of course, know the channel number of the
desired station).
OK
Executing direct channel input
• Press the „MENU“ key to display the TV menu.
2) Available only on TV sets
which are equipped with this
option.
• Press the white key
table.
to display the station
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
• Move the cursor to en empty programme posi-
tion (or to a position containing a station you
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
7. Programming stations
wish to replace with the new station).
• Move the cursor to „Frequency/Channel“.
• Press the „OK“ key.
MENU
• In the setting window which is then displayed,
move the cursor to „Channel“ or „Special chan-
nel“.
• Enter the number of the channel or special
channel with the numeric keys.
• Press the „OK“ key to save the station.
• Press the „TV“ key to close the menu.
OK
Fine tuning
When you programme stations, each channel is
automatically tuned to the centre frequency. This
is normally sufficient. If this automatic
function does not produce satisfactory
results, you can carry out fine tuning.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Executing fine tuning
Station table
• Select the desired programme position.
• Press the „MENU“ key.
Timer
Configuration
• Press the white key
tion table.
to open the sta-
Change value
with + and –
Confirm with OK
Channel
6
Cable channel
--
Frequency 182.31 MHz
Scan operation
• Move the cursor to the subject card
„Frequency/Channel“.
ARD
• Press the „OK“ key to confirm your selection.
• In the setting window, select „Frequency“ and
+
use the
key to change the frequency value
-
until the picture is as clear as possible.
• Save the new setting by pressing the „OK“ key.
• Press the „TV“ key to close the menu.
OK
16
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Station logo
Call the menu
Each station which transmits VPS signals also
sends a station logo with up to eight characters,
which is automatically assigned to this station in
the station list. If this automatic function does not
work correctly, or if you want a different station
logo, you can overwrite the logo manually.
MENU
Setting the station logo
• Select the desired programme position.
• Press the „MENU“ key.
OK
• Press the white key
to open the station table.
• Move the cursor to the subject card „Logo“.
• Press the „OK“ key to confirm your selection. In
the setting window, you can now enter
the desired logo with the aid of the
009 MDR
Decoder
008 SW 3
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
ꢀ
ꢀ
ꢀ
numeric keys.
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Picture-Volume
AV devices
As long as the red cursor is selected,
you can enter the desired letters and
digits by pressing the numeric keys
(e.g. key ᕥ: J-K-L-5). If you make a
mistake, you can delete the characters
before the red cursor, one at a time,
with the red key. To delete the entire
logo, press the ll key.
Station table
Timer
Frequency/channel
TV Standard*
Configuration
001 ARD
: select
menu item
ꢂ
. , ᕢ ABC ᕣ DEF
ᕤ GHI ᕥ JKL ᕦ MNO
ᕧ PQRS ᕨ TUV ᕩ WXYZ
ARD
• When you are finished, press the
„OK“ key to save the new logo.
• Press the „TV“ key to close the menu.
OK
2) Available only on TV sets
which are equipped with this
option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
9. Sorting stations
In the station table, you can shift or copy one or
more stations to other programme positions. You
can also delete any unwanted stations.
MENU
Copying, shifting and deleting stations
• Press the „MENU“ key to call the TV menu.
• Press the white key
to call the station table.
• Press the „F1“ key to enable editing of the sta-
tion table.
F1
• Use the cursor control key to select the pro-
gramme position you want to copy, shift or
delete.
OK
• Press the „OK“ key to mark this programme
position: the text colour changes to
orange and an asterisk is displayed
after the last digit of the programme
009 MDR
Decoder
008 SW 3
007* N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
ꢀ
ꢀ
ꢀ
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Picture-Volume
AV devices
Station table
Timer
position number (in the example on the
left: position 007).
• To shift or copy this station, move the
cursor to the programme position
before or after which the selected sta-
tion(s) is/are to be inserted. If these
stations originally had a lower posi-
tion number than this position, it/they
will be inserted before this programme
position. Stations which originally had
a higher number will be inserted after
this programme position.
Frequency/channel
TV Standard*
Configuration
001 ARD
F1: End
White: Clear all
marks
Move, copy, delete: Select one or more stationswith OK.
Move cursor to new position
+ = copy, - = move, II = delete
+
• Press the
key to copy (+) or shift (-) the
-
OK
selected station(s).
• To delete a station, press the ll key.
• Press the „F1“ key to save the new settings
18
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Selecting stations
Call the menu
Station selection and programme posi-
tion management
Your TV set can manage up to 999 programme
positions in the station table. You can select these
programme positions with the numeric keys, with
the oval „P+/P-“ rocker key or via the station
table.
When you enter a position number on the nume-
ric keys, the first digit you enter is the „hundreds“
digit. If there are less than 100 programme posi-
tions defined, this digit automatically moves to the
„tens“ position. If less than 10 programme posi-
tions exist, it automatically moves to the „ones“
position.
After pressing any numeric key, you have three
seconds to enter further digits.
Selecting programmes from the station
table
14 MDR
13 Nord 3
12 RTL
11 SAT 1
10 Nord 3
In normal TV mode, you can open the
station table with the white key
. In
the table which is then displayed, you
can select a station with the oval „P+/P-“
rocker key. Then press the „OK“ key to
switch to this station.
If more than 20 stations are stored in the
station table, you can display the next
10 stations by pressing the oval cursor
control key.
9
8
7
6
5
4
3
2
1
SuperRTL
Kabel 1
PRO 7
West 3
Hessen 3
SW-BW
Bayern 3
ZDF
ARD
Return to previous station
OK
With the red key
, you can switch back and
forth between the last two stations you selected.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
11. Picture settings, general
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
ꢀ
MENU
You can adjust the picture settings (brightness,
contrast, chrominance, etc.) for all programme
positions and save these settings as the standard
values. These standard values can be recalled at
any time by pressing the „OK“ key.
OK
Defining the picture settings:
• Press the „MENU“ key to open the TV menu.
• Press the „OK“ key to open the menu „Picture
and sound“.
Rotation2)*
Picture pos., vertica
Panorama2)*
CTI*
Comb filter*
Noise reduction*
Picture sharpness*
Colour intensity
Contrast
• Use the cursor control key to select the
individual picture settings.
• Press the „OK“ key and then use the
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
+
Station table
Timer
key to change the setting in the
-
setting window.
• Use the cursor control key to select the
3rd line in the setting window "...
accept as a standard value: OK".
• Save the new setting as the standard
value by pressing the „OK“ key.
Configuration
Contrast
61
50
: select
menu item
Standard value
Accept 61 as the standard value:
• Press the „TV“ key to close the menu
OK
ꢀ If these standard settings are unsatisfactory
for some programme positions, you can
define special individual settings for these
positions as described on the next page.
Rotation2)
This function can be used to compensate for the
effects of the Earth’s magnetic field. Normally, this
adjustment should be necessary only when you
first install the TV set, or if you move it to a diffe-
rent location, and the picture is not aligned hori-
zontally on the screen.
OK
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
2) Available only on TV sets which are equipped
with this option.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Picture settings, general
Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
ꢀ
MENU
Panorama2) function
This setting can be made only on 16:9 TV
sets.
ꢀ
OK
The panorama function can be used to expand
"normal" programmes in 4:3 format to the 16:9
format. This is done by increasing the width of the
picture to fill the complete width of the screen.
Setting Panorama2) mode:
Rotation2)*
Picture pos., vertica
Panorama2)*
CTI*
Comb filter*
Noise reduction*
Picture sharpness*
Colour intensity
Contrast
ꢀ
ꢀ
ꢀ
• Press the "MENU" key to open the TV
menu.
• Press the "OK" key to open the menu
"Picture and sound".
• Use the cursor control key to select
"Panorama".
• Press the "OK" key and then, in the
Picture-Volume
AV devices
Station table
Timer
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Configuration
: select
menu item
Panorama
On, zoom 1 Mode
Non-linear
+
setting window, use the
key to
change the setting for "Panorama".
• Use the cursor control key to select the menu
-
+
item "Mode" and use the
"linear" or "non-linear".
key to select either
-
OK
• Press the "OK" key to save your changes.
The picture shows the factory setting.
• Press the "TV" key to close the TV menu.
The functions "Panorama2)" and "Zoom"
can also be used together.
ꢀ
OK
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
11.1 Picture settings for a specific
programme position ...
Call the menu
In a menu with two asterisks (**), the pictu-
re settings for a specific programme posi-
tion cannot be changed.
ꢀ
MENU
If the standard settings are not satisfactory for cer-
tain programme positions, you can define diffe-
rent settings for these positions with the menu item
„Picture settings for Pr ...“. These settings apply
only to the selected programme position and can-
not be overwritten by the standard settings.
OK
VCR
Defining different picture settings for Pr.
xy:
Colour standard
Colour offset
CTI
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
• Select the programme position for
which you want to define different pic-
ture settings.
• Press the „MENU“ key to open the TV
menu.
Comb filter
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Noice reduction
Picture sharpness
Colour intensity
Contrast
Station table
Timer
Configuration
These settings apply to the currently selected
programme position.
: select
menu item
• Press the „OK“ key to open the menu
„Picture and sound“.
• Use the cursor control key to select the
item „Picture settings for Pr. xy“.
• Press the „OK“ key and then select the setting
you want to change.
OK
• Press the „OK“ key to confirm your selection
+
and then, in the setting window, use the
to change the setting.
key
-
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
You can also define and recall the individu-
al picture settings in the station table.
ꢀ
OK
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
12. Sound settings, general
Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
ꢀ
MENU
You can adjust the sound settings (volume, treble,
bass, etc.) for all programme positions and save
these settings as the standard values. These stan-
dard values can be recalled at any time by pres-
sing the „OK“ key.
Defining the sound settings:
• Press the „MENU“ key to open the TV menu.
OK
• Use the blue key
to select the menu „Picture
and sound“ and press the „OK“ key to
open it.
Stereo wide*
Spatial sound*
ꢀ
ꢀ
ꢀ
Balance*
Tone settings
Volume headphones
• Use the cursor control key to select the
item „Sound settings, general“.
• Press the „OK“ key and then select the
setting you want to change.
• Press the „OK“ key to confirm your
selection and then, in the setting win-
Picture-Volume
AV devices
Sound set.prog.po Bass
Sound settings, gen. Treble
Pict. set.,prog. posn.* SRS WOW
Pict. settings, gen. Volume
Station table
Timer
Configuration
Volume
55
46
: select
menu item
Satandard value
+
dow, use the
ting.
key to change the set-
-
Accept 55 as the standard value: OK
• Use the cursor control key to select the third line
"Use ... as new standard value: OK".
• Press the „OK“ key to save the new setting as
OK
the standard value.
• Press the „TV“ key to close the menu.
If these standard settings are unsatisfactory
ꢀ
for some programme positions, you can
define special individual settings for these
positions as described on the next page.
OK
SRS WOW function only on TV sets which are
equipped with this option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
12.1 Sound settings for a specific
programme position ..
Call the menu
In a menu with two asterisks (**), the set-
tings for certain menu items cannot be
changed.
ꢀ
MENU
If the standard settings are not satisfactory for
certain programme positions, you can define dif-
ferent settings for these positions with the menu
item „Sound settings for Pr...“. These settings
apply only to the selected programme position
and cannot be overwritten by the standard set-
tings.
OK
Defining different sound settings for Pr.
xy:
• Select the programme position for
which you want to define different
sound settings.
• Press the „MENU“ key to open the TV
menu.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Sound set.prog.po
Sound settings, gen.
Pict. set.,prog. posn.*
Pict. settings, gen.
Station table
Timer
Forced mono*
Tone settings*
Volume correction
Configuration
These settings apply to the currently selected programme
position.
: select
menu item
• Use the blue key
to select the menu
„Picture and sound“ and press the
„OK“ key to open it.
• Use the cursor control key to select the item
„Sound settings for Pr. xy“.
• Press the „OK“ key and then select the setting
you want to change.
OK
OK
• Press the „OK“ key to confirm your selection
+
and then, in the setting window, use the
to change the setting.
key
-
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
You can also define and recall the individu-
al sound settings in the station table.
ꢀ
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Colour standard
Call the menu
In a menu with two asterisks (**), the set-
tings for the menu item "Colour standard"
cannot be changed.
ꢀ
MENU
Your TV set normally detects the colour standard
(PAL, SECAM, NTSC, NTSC44, PAL60, PAL M)
automatically. If this automatic function does not
work, you can select the colour standard manually.
The colour standard function is set in the factory
to „Automatic“.
OK
Setting the colour standard:
• Select the programme position for
which you want to set the colour stan-
dard.
• Press the „MENU“ key to open the TV
menu.
009 MDR
Decoder
008 SW 3
007 N24
006 PRO 7
005 RTL
004 SAT 1
003 Bayern 3
002 ZDF
ꢀ
ꢀ
ꢀ
Sound correction
Colour standard*
Picture corrections*
Picture quality*
Enter Logo
Picture-Volume
AV devices
Station table
Timer
• Press the white key
„station table“.
to open the
Frequency/channel
TV Standard*
Configuration
001 ARD
• Move the cursor to „Colour standard“.
• Press the „OK“ key to confirm your
selection and then, in the setting win-
: select
menu item
Colour standard Automatic mode
+
dow, use the
key to select the
-
appropriate colour standard.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
OK
2) Available only on TV sets which are equipped
with this option.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
14. Display configuration
In a menu with two asterisks (**), the set-
tings for the menu items "Display configu-
ration" and "Automatic zoom" cannot be
changed.
MENU
ꢀ
The green 7-segment display2) can be programm-
ed to show the time or the programme position
number.
Setting the display configuration:
• Press the „MENU“ key to open the TV
menu.
OK
ꢀ
ꢀ
ꢀ
• Press the red key
„Configuration“.
• Use the cursor control key to select
„Operation“ and then „Display confi-
guration“.
to open the menu
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
EPG settings
Automatic zoom*
Init. prog. position*
Display configuration2)*
• Press the „OK“ key.
Configuration
Language*
• In the setting window, use the cursor
control key to select either „Display
brightness“ or „Permanent display“.
: select
menu item
Brightness of Display
3
Permanent display
Time
+
• Change the setting with the
key.
-
• Press the „OK“ key to save the new
setting.
• Press the „TV“ key to close the menu.
ꢀ
ꢀ
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
EPG settings
Automatic zoom*
Init. prog. position*
Display configuration2)*
Setting the automatic zoom
If the automatic zoom function is activa-
ted, pictures in "widescreen" format,
such as 16:9 programmes, will be
expanded automatically to fill the full
height of the TV screen.
Configuration
Language*
: select
menu item
Automatic zoom on
If the automatic zoom function is deactivated, the
picture will not be expanded automatically.
2) Available only on TV sets which are equipped
with this option.
OK
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
15. Childlock
Call the menu
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
With this function, you can determine when the
TV set can be switched on and which program-
mes may be viewed at specific times. The child-
lock may be set:
MENU
a) for all programmes,
b) so that one to six programmes (Prog A ... Prog
F), called permitted programmes can still be
viewed,
c) so that all or all permitted programmes may be
viewed during a preset period (between the
specified start and end times).
OK
After setting, the childlock must be saved with a
4-digit „Code“
Setting the childlock:
ꢀ
ꢀ
ꢀ
• Press the „MENU“ key to open the TV
menu.
Picture-Volume
AV devices
End viewing time*
Start viewing time*
Code input
Permitted programmes*
Childlock
• Press the green key
menu „Timer“.
to open the
Time settings
Timer control
Reminder*
Childlock
Station table
Timer
a) Setting the childlock for all programmes:
Use the cursor control key to select
„Childlock“ and press the „OK“ key.
Configuration
: select
menu item
Activation off
+
In the setting window, use the
to set the childlock to „Active“.
key
-
• Press the „OK“ key to save the new setting.
b) Permitted programmes*
Activate the childlock as described in step a),
above.
Use the cursor control key to open the file card
„Permitted programmes“ and press the „OK“
key. In the setting window, use the numeric
keys to enter the numbers of the permitted pro-
gramme positions or press the „AV“ key to per-
mit use of the AV programme position.
• Press the „OK“ key to save the new setting.
OK
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
15. Childlock
c) Start* and end times*
Use the cursor control key to open the file card
„Start viewing time/End viewing time“„ and
press the „OK“ key. In the setting window, enter
the start and end times with the numeric keys.
OK
Protecting the childlock settings with a code
• Use the cursor control key to open the file card
„Code input“ and press the „OK“ key. In
the setting window, enter your personal
code with the numeric keys.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Make a note of the code, since the
childlock can be switched off only
ꢀ
End viewing time*
Time settings
Timer control
Reminder*
Childlock
Start viewing time*
Code input
Permitted programmes*
Childlock
Station table
by entering it again!
Timer
• Press the „OK“ key to save the code.
• Press the „TV“ key to close the menu.
Configuration
• Switch off the TV set with the
key.
: select
menu item
Code * * * *
The childlock is activated only
when the TV set is switched off.
ꢀ
Deactivating the childlock
If the childlock is active, this is indicated by the
display of a message when you switch the TV set
on. If you then enter the correct code, the child-
lock is temporarily deactivated and the TV set can
be operated „normally“ as long as it remains
switched on. If you wish to permanently deactiva-
te the childlock, proceed as follows:
OK
• Press the „MENU“ key to open the TV menu.
• Press the green key
„Timer“.
to open the menu
• Use the cursor control key to select „Childlock“
and press the „OK“ key.
+
• In the setting window, use the
childlock to „Inactive“.
key to set the
-
• Press the „OK“ key to save the new setting.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Reminder
Call the menu
In a menu with two asterisks (**), the set-
tings for the menu item "Reminder" cannot
be changed.
ꢀ
MENU
If you want to be reminded of something while
watching television, you can set a reminder time.
At this time, a box with the reminder appears on
the screen of the TV set.
OK
Setting the reminder time
• Press the „MENU“ key to open the TV menu.
• Press the green key
menu „Timer“.
to open the
• Use the cursor control key to select
„Reminder“.
• Press the „OK“ key twice and then, in
the setting window, enter the desired
time (four digits) with the numeric
keys.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
Time settings
Timer control
Reminder*
Station table
Timer
Configuration
Childlock
Reminder time*
: select
menu item
• Press the „OK“ key to save the new
setting.
Time - - : - -
• Press the „TV“ key to close the menu.
At the specified time, a box with the reminder
appears on the screen of the TV set. You can
clear this display by pressing any key.
If you do not want the reminder to appear
each day, you must clear it in the menu by
pressing the ll key.
ꢀ
OK
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Menü aufrufen
17. Timer control
In a menu with two asterisks (**), the set-
tings for the menu items "Switch-on time"
and "Switch-off time" cannot be changed
ꢀ
MENU
In the menu item „Timer control“, you can pro-
gramme a switch-on time, a switch-off time and a
sleep timer (switch off after ...).
Switch-on time*: the TV set is switched on at the
specified time.
Switch-off time*: the TV set is switched off at the
specified time.
OK
Switch off after ...: (Sleep Timer): the TV set is
switched off after the period you specify (in incre-
ments of 15 minutes).
Setting the times
• Press the „MENU“ key to open the TV
menu.
ꢀ
ꢀ
ꢀ
Picture-Volume
AV devices
• Press the green key
menu „Timer“.
to open the
Time settings
Timer control
Reminder*
Childlock
Station table
• Use the cursor control key to select
„Switch-on time“ or „Switch off time“.
• Press the „OK“ key twice and then, in
the setting window, enter the desired
time (four digits) with the numeric
keys.
Switch off after...
Switch-off time*
Switch-on time*
Timer
Configuration
: select
Power-on time, power-off time and sleep timer can
be set here.
menu item
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
At the specified switch-on time, the TV set swit-
ches from standby mode (red LED on) to normal
TV mode. If you do not press any key on the
remote control unit within 10 minutes, the TV set
switches back to standby mode. This ensures that
the TV set does not remain switched on if you are
not at home.
If you do not want the TV set to switch itself on
or off each day, you must clear the times in the
menu by pressing the ll key.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
18. Setting the time
Call the menu
Normally, the TV set gets the date and time from
the data transmitted with the programme (if this
station transmits Teletext) and sets the internal
clock accordingly.
MENU
If the data are not received correctly, or if the sta-
tion you are watching does not send such data,
you can set the date and time manually.
Normally, this function is not needed: even the
changeover between summer and winter time is
executed automatically.
OK
Setting the time and date
• Press the „MENU“ key to open the TV
menu.
ꢀ
ꢀ
ꢀ
• Press the green key
menu „Timer“.
to open the
Picture-Volume
AV devices
• Use the cursor control key to select the
file card „Set time“.
• Press the „OK“ key twice.
• In the setting window, enter the current
time with the numeric keys.
Time settings
Timer control
Reminder
Station table
Local time offset
Current date
Current local time
Timer
Configuration
Childlock
You can set the date and time manually if they have not
been set automatically.
: select
menu item
• The clock starts running from this time
when you press the „OK“ key.
• Use the cursor control key to select the file card
„Current date“.
• Press the „OK“ key.
• In the setting window, enter the current date
with the numeric keys.
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the menu.
The local time offset is the difference between
the local time and Greenwich Mean Time
(GMT). This time difference and any necessary
switching between summer time and winter
OK
i
time are normally detected automatically by the
TV set.
They need to be set manually only if the TV set
does not detect them automatically.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
19. Function keys
The remote control has three functions keys: F1,
F2 and F3. You can program function keys F1 and
F3 with any desired function.
F1
Special
The function keys are programmed in the
factory with the setting "All functions",
which means that all available special
functions are displayed when you press
one of these keys.
Functions 1
PIP on
ꢂ
ᕢ
ᕣ
ᕤ
9-programme on
Picture format
Picture pos., vertical
Programming function key Fl or F3 with
a desired
• Press the "MENU" key to open the TV
menu.
• Press the red key
tion" menu.
• Use the cursor control key to select "Function for
F1 or F3".
to open the "Configura-
MENU
• Press the "OK" key and use the cursor control
key to select one of the available functions.
• Press the "OK" key and then, in the setting win-
+
dow, use the
to "On".
key to set the selected function
-
OK
• Press the "OK" key to save your changes.
• Press the "TV" key to close the TV
menu.
ꢀ
ꢀ
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
All F1 functions
Picture format
9-programme
PIP
Configuration
Language*
: select
menu item
The function key can be programmed with any desired
function.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Special functions
Call the menu
AV-PIP (picture-in-picture)
An AV picture (such as that from a security
camera) can be displayed within the picture from
the currently selected station.
F1
1
Activating AV-PIP (picture-in-picture):
• If "F1" is already programmed with the function
"Picture in picture", briefly press the "F1" key;
otherwise, hold the "F1" key depressed
until "Special functions 1" is displayed
and then press the ቢ key to display
the PIP picture.
• The PIP picture can be moved with the
aid of the cursor keys ̇ ̈ . The last
position which was selected is saved.
Special
Functions 1
PIP on
9-programme on
Picture format
ꢂ
ᕢ
ᕣ
• The frame of the PIP picture can be set
to active (red) or inactive (white) by
pressing the "OK" key.
• If this frame is red, you can select the
AV device by pressing the "AV" key
and using the numeric keys.
• Pressing the red key
small pictures.
swaps the large and
OK
• Pressing the green key
causes the PIP picture
to be displayed as the large picture and termi-
nates the PIP function.
• Press the "TV" key to hide the PIP picture.
If a recording has been programmed in the
ꢀ
timer menu, the programme being recor-
ded will be displayed if the PIP function is
activated.
If the TV set is equipped with a satellite
ꢀ
upgrade kit or a DVB upgrade kit, one of
the other programme positions can be
selected as the source of the PIP picture.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Special functions
Call the menu
9-programme overview
With this function, you can open an overview of
the current programme position and the next eight
positions. The nine small programme windows are
updated at intervals. Each shows a snapshot of
the current programme.
F1
2
Calling the 9 PRG. overview:
• If "F1" is already programmed with the function
"9x multipicture", briefly press the "F1" key;
otherwise, hold the "F1" key depressed
until "Special functions 1" is displayed
and then press the ባ key to display
ꢂ
ᕢ
ᕣ
the 9x multipicture.
ARD
ZDF
BR 3
• You can use the "P+/P-" rocker key to
select the previous or following nine
programme positions.
ᕤ
ᕥ
ᕦ
SAT 1
RTL
DSF
• To switch to one of the programmes
displayed in this function, simply press
the corresponding numeric key ቢ to
ቪ.
ᕧ
ᕨ
ᕩ
PRO 7
MDR
MTV
• To terminate the 9 Prg. overview, press the "TV"
key.
Not possible with an external satellite receiver!
34
Download from Www.Somanuals.com. All Manuals Search And Download.
20. Special functions
Picture format
Calling the picture format function:
Call the menu
•
If "F1" is already programmed with the function
"Picture format ", briefly press the "F1" key;
otherwise, hold the "F1" key depressed until
"Special functions 1" is displayed and then press
the ቤ key and select the desired picture format.
F1
3
• You can use the "P+/P-" rocker key to select the
various functions. You can also set the zoom
factor for the selected picture format within the
next five seconds.
• The settings made here (except for the
automatic zoom in the TV menu)
remain stored until you switch to anot-
her programme position or switch off
the TV set.
Special
Functions 1
ꢂ
PIP on
9-programme on
Picture format
ᕢ
ᕣ
Zoom
After selecting the "Zoom" function, you
can adjust the zoom factor with the - +
key.
In addition to adjusting the zoom factor, you
can move the picture up or down on the
screen so that, for example, the station logo
or subtitles remain visible. To do this, press
the F1 key and then the ብ key and move the picture
with the "P+/P-" rocker key.
Standard 4:3
This is the standard setting for all programmes
with the aspect ratio 4:3.
Panorama*
With the Panorama function, you can adjust the
picture of a programme in 4:3 aspect ratio to fill
the 16:9 format of the screen (only on sets with
16:9 screen). The picture is expanded uniformly in
the horizontal direction. You can also zoom the
picture. The Panorama function can be switched
on and off in the menu "Picture and Sound" under
the heading "Picture settings, general".
16:9 full screen
This function is used to display the picture format
of external devices (such as 16:9 video recorders)
with the correct aspect ratio.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
21. Teletext
Teletext is a free information service provided
by many TV stations. Within this „electronic
newspaper“, you can scroll through the pages
in various ways.
i
TEXT
Calling Teletext:
• Press the „TEXT“ key.
If the station you are watching trans-
TV Guide 2
FS-Sendungen
ARD morgen
ARD heute
TV Guide
Sport 1
mits „TOP“ teletext, two file-card boxes
are displayed (see the picture on the
left). Otherwise, page 100 appears
(see the lower picture).
• In the case of „TOP“ stations, you
can select a file card with the cursor
control key.
Subjects
Chapter
Pages
Wetter
tagesschau
Next BookMark
Impressum
Inhalt
Set BookMark Übersicht
Cursor: select Sub-
jects / Section.
OK: display page
• After selecting a card, press „OK“ to
open it.
Controlling Teletext when the pages are displayed directly:
The blue key
selection function.
is used to preselect the subject
OK
The yellow key
selection function.
is used to preselect the section
Blue preselection key
Yellow preselection key
The white key
is used to preselect
White preselection key
the page selection function.
After pressing one of these preselection
keys, you can step through the sub-
jects, sections or pages with the rocker
switch „P+/P-“.
You can also move directly to a page
by entering its number with the nume-
ric keys. If multiple sub-pages exist for
the selected page, their numbers are
displayed in black. In the example on
the left, there are five sub-pages.
You can scroll through the sub-pages
with the cursor control key.
©
©
©
©
©
mark
15:30:23
Topics
Sections
next
Pages
100 100 SAT.1 21.05.02
OK
OK
̇
̈
00 01 02 03 04 05 06 07 08 09
Sub-pages
36
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Teletext
Double font size
When viewing Teletext pages, you can switch to a
larger font with the F1 key. The first time you
press this key, the upper third of the page is
displayed with the large font. Pressing it again
displays the centre third of the page and pressing
it a third time displays the bottom third of the
page. Pressing the key a fourth time returns to the
full-page display with the normal font size.
Riddle solution key
Function key F2 is programmed to display hidden
text on a Teletext page, such as the solutions to
riddles.
Return to last contents page
You can return directly to the last contents page at
any time by pressing the ᕌ key.
Teletext: setting marks3)
You will probably have your favourite Teletext
pages, such as stock exchange reports, news,
weather forecasts, which you visit frequently.
To permit rapid access to such pages, you can set
so-called „marks“ on these pages.
To do this, first go to the page on which you want
to set the mark.
• Then press the red key
for „Set mark“ to set a
mark on this page. A „paper-clip“ symbol appe-
ars at the top left corner of the page. If the page
has sub-pages, the mark is always set and
displayed on the currently displayed sub-page.
Up to 10 marks can be set on each pro-
ꢀ
gramme position. The total number of
marks (on all programme positions) is
restricted to 120.
3) Not possible with an external
satellite receiver!
37
Download from Www.Somanuals.com. All Manuals Search And Download.
21. Teletext
Teletext: scrolling by marks3)
With Teletext active, you can scroll sequentially
through all marked pages by repeatedly pressing
the green key
You can even view your favourite pages directly
from the TV mode with the „TEXT“ key. Pressing
the „TEXT“ key opens Teletext and selects the first
marked page. You can then scroll through the
marked pages with the „TEXT“ key. Pressing the
„TEXT“ key with the last marked page displayed
switches back to the TV programme.
Teletext: displaying active marks3)
If marks are set for a programme position, pressing
the F3 key displays a list of all marks, showing
where they are set. Pressing F3 again hides the list.
With the list displayed, you can select any des-
ired mark with the numeric keys.
Teletext: deleting marks3)
Call the teletext page whose mark you want to
delete and press the red key
delete the mark.
„Clear mark“ to
Teletext: subtitles
Your TV set can display subtitles transmitted on
Teletext together with the programme. If such sub-
titles are available, the station normally displays a
message at the beginning of the programme, tel-
ling you where to find the subtitles.
• Press the „TEXT“ key to open Teletext.
• In the case of „TOP“ stations, press the „OK“
key to open any page.
• Use the numeric keys to enter the number of the
page containing the subtitles.
3) Not possible with an external
satellite receiver!
38
Download from Www.Somanuals.com. All Manuals Search And Download.
22. AV devices
Call the menu
AV (Audio/Video) devices are devices which
provide picture and/or sound signals for play-
back on your TV set (for example, video cas-
sette recorders, DVD players, etc.).
i
MENU
In the menu „AV devices“, the setting window
displays a list of all common AV units.
Always connect AV devices exactly as
shown in the connection diagram in the TV
menu of your TV set!
ꢀ
SVHS/Hi8 and Data Logic video recorders must
always be connected as „Video recorder 1“. A „nor-
mal“ VHS video recorder may be connected as
„Video recorder 1“ or „Video recorder 2“.
OK
Connect as follows:
Connecting AV devices
Videorecorder 1
FBAS
• Press the „MENU“ key to open the TV
ꢀ
ꢀ
ꢀ
Back of TV set
menu.
• Press the yellow key
Picture-Volume
AV devices
Station table
Timer
I I I I I I I I I I
I I I I I I I I I I
EURO1
to open the
I I I I I I I I I I
I I I I I I I I I I
EURO2
menu „AV devices“. In the factory, a
video recorder is programmed for the
EURO 1 socket and a DVD player for
the EURO 2 socket. If you want to
change these settings, you can select
one of the AV devices with the cursor
control key and delete it by pressing
the ll key.
DVD / CD
FBAS
Front of TV set 2)
Camcorder
Configuration
Select device with
cursor and call
device attributes
with OK
Select a new device:
Videorecorder 1
Videorecorder 2
DVD / CD
Decoder A
Decoder B
Other device
Satellite / SetTop
• Use the cursor control key to select the device
you wish to connect to the TV set.
• Press the „OK“ key to confirm your selection
and, in the setting window, set the parameters
„Signal OUT“ and „Signal IN“ to match the AV
device (see the operating instructions for the AV
device for details).
OK
• Press the „OK“ key. The newly connected device
appears in the connection diagram.
Caution: connecting a new device may
ꢀ
cause an existing connection to be modi-
fied. If this happens, you will have to move
the cables for the affected AV device to the
correct positions.
2) Available only on TV sets
which are equipped with this
option.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
In a menu with two aste-
risks (**), the settings for
this menu item cannot be
changed.
22. AV devices
Data Logic video recorder
ꢀ
„Data Logic“ is a system which permits a dialogue
between the TV set and a video recorder. This
„intelligent“ system provides such functions as:
i
- Automatic transfer of the settings for terrestrial
and cable stations to the video recorder.
- One-touch recording: the video recorder records
the programme you are currently watching.
- Automatic switching to the AV programme position.
- Direct control of recording from the timer menu
of the TV set.
- Automatically switching off the video recorder
when the TV set is switched to standby mode.
In the menu „AV devices“, activate the
option „Data Logic“ under „Video recor-
der 1“ and connect the video recorder to
the EURO 1 socket.
MENU
OK
ꢀ
ꢀ
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Data Logic will function correctly
only if the video recorder is con-
ꢀ
DataLogic
Terr. station search
nected to the EURO 1 socket.
Configuration
Language*
Other comparable dialogue systems:
Qlink (Panasonic), EasyLink (Philips),
Megalogic (Grundig, SMARTLINK (Sony).
: select
menu item
Data transfer start Yes
Data Logic: transferring the station table
• Press the „MENU“ key to open the TV menu.
• Press the red key
„Configuration“.
to open the menu
• Use the cursor control key to select „Automatic
station search“.
• Press the „OK“ key and then use the cursor con-
trol key to select „Data Logic“.
OK
• Press the „OK“ key and then, in the setting win-
dow, select „Start data transfer: yes“ with the
-/+ key.
• Press the „OK“ key to transfer the stations table
from the TV set to the video recorder
• Press the „TV“ key to close the TV menu.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
22.1 AV playback
Call the menu
AV playback
(Devices with switching voltage)
MENU
AV playback is the term for playing back video-
cassettes, DVDs, etc. from an AV device for vie-
wing them on a TV set.
In order to view the pictures, you must program-
me your TV set so that it automatically switches to
the AV programme position when a signal is
received at the EURO socket to which the AV
device is connected.
OK
Programming automatic switching
ꢀ
ꢀ
ꢀ
In a menu with two asterisks (**),
the settings for this menu item can-
not be changed.
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Language*
Programme switching is set to
"On" in the factory for both EURO
sockets.
ꢀ
EURO 2
EURO 1
Configuration
: select
menu item
Change stations on
• Press the „MENU“ key to open the TV
menu.
• Press the red key
„Configuration“.
to open the menu
• Use the cursor control key to select „EURO
socket“.
• Use the cursor control key to select „EURO 1 or
„Euro 2“.
• Press the „OK“ key and then, in the setting win-
dow, set „Programme switching“ to „ON“ with
OK
+
the
key.
-
• Press the „OK“ key to save the new setting.
• Press the „TV“ key to close the TV menu.
When you subsequently start a playback opera-
tion on the connected AV device, the TV set swit-
ches to playback mode, regardless of the current-
ly selected programme position.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
22.1 AV playback
AV playback
(Devices without switching voltage)
In order to view the pictures, you must manually
switch your TV set to playback mode.
• Select any programme position.
• Press the „AV“ key.
AV
•
Press the numeric key for the desired AV
device.
AV menu Playback
ꢂ
ᕢ
Videorecorder 1
• The TV set now switches from the cur-
rent programme to playback mode.
• Start the playback operation on the
AV device. Playback mode remains
active until you switch to another pro-
gramme position.
EURO1
EURO2
DVD / CD
Picture quality when playing
back from tape machines
The VCR function provides the best possible picture
quality when playing back recordings from a tape
machine, such as a camcorder or video recorder.
Setting the VCR function
In a menu with two aste-
risks (**), the settings for
the menu item "VCR" can-
not be changed.
• Select the appropriate programme position.
• Press the „MENU“ key to open the TV menu.
• Press the „OK“ key to open the menu „Picture
and sound“.
ꢀ
• Use the cursor control key to select „Picture set-
tings for Pr xy“.
• Press the „OK“ key and then use the cursor
control key to select „VCR“.
• Press the „OK“ key for confirmation and use the
-/+ key to select „Opt. 1“. If this setting does
not produce a satisfactory picture quality,
switch to „Opt. 2“.
• Press the „OK“ key to save the new setting.
2) Available only on TV sets
which are equipped with this
option.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
22.2 Copying between AV
devices
• Select any programme position.
• Press the „AV“ key to display the „AV menu
Playback“.
• Select the AV playback device with the numeric
keys.
•
The TV set switches from the current programme
to the selected playback device.
• Press the „AV“ key again.
• Then press the red key
ding device.
to select the recor-
• Press the green key to lock the selected signal
connection. If a Data Logic video recorder is
connected, it will immediately start to record,
providing there is a cassette with a protection
tag inserted.
• Start recording with the recording AV device.
• Play back with the playback AV device.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
23. EPG - NexTView
NexTView is an Electronic Program Guide (EPG)
for all important programme providers. This EPG is
transmitted by various stations and also contains
the programme data for the other stations.
The TV set needs about 20 minutes to collect the
large amount of data for the first time.
• On TV sets with two tuners (standard configura-
tion) the data are collected by the second tuner
(see the next page) during normal operation of
the TV set. When the data have been collected,
the TV set stores the EPG in a special memory.
The EPG is updated regularly in this memory as
long as the TV set is not switched off with the
main switch.
• On TV sets with only one tuner (e.g. if your set
has been converted and has only one satellite
tuner):
- the set must be left tuned to the NeexTView pro-
gramme position for at least 20 minutes, or
- the data are collected during the night (between
02:30 - 03:00) while the set is in standby mode.
Not possible with an external satellite receiver!
44
Download from Www.Somanuals.com. All Manuals Search And Download.
23.1 Activating the EPG NexTView
Call the menu
The EPG function can be switched on by pressing
the keys "F3" and ባ if an EPG programme posi-
tion is defined in the menu (see below).
F3
2
On all programme positions where NexTView is
received, the TV set displays the following messa-
ge after a short delay:
MENU
This station is sending NexTView (EPG). Save it as
the EPG programme position?
• Yes
• No
OK
The TV set is asking you whether you want to use
this programme position for collecting the data for
the EPG NexTView.
Press the red key for "No" - this pro-
ꢀ
ꢀ
ꢀ
gramme position is not used for recei-
ving the NexTView data. The message is
still displayed for all other programme
positions where NexTView data are
received.
Press the green key for "Yes" - this pro-
gramme position will be used for recei-
ving the NexTView data. The message is
then not displayed for other programme
positions where NexTView data are
received.
Operation
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
Picture-Volume
AV devices
Station table
Timer
EPG settings
Automatic zoom
Init. prog. position
Display configuration
Configuration
Language*
: select menu
item
EPG
on
6
on
EPG prog. position
Now showing
RTL 2
If you know the programme position for a
NexTView station, you can also enter its number
directly on the numeric keys.
OK
You can overwrite any existing programme posi-
tion number or delete the number by pressing the
II key.
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
Not possible with an external satellite receiver!
45
Download from Www.Somanuals.com. All Manuals Search And Download.
23.2 Collecting NexTView data
The EPG NexTView is transmitted by
- the Teletext function "Subtitles" is acti-
ve.
If the TV set is switched to standby mode
during data collection, the text
"NexTView" appears on the green
display to remind you that the data-col-
lection operation is still running.
various stations and the information pro-
vided by each station may differ. You
thus have a choice between several dif-
ferent NexTView programme guides.
• On TV sets with only one tuner (e.g. if
your set has been converted and has
only one satellite tuner):
Switch to the NexTView programme
position.
Leave it on this programme position
for at least 20 minutes.
• TV sets with two tuners:
The TV set collects the NexTView data
with the aid of its second tuner.
Special notes:
Stations which are listed in the TV station
list of the TV set with an automatic logo
(set automatically by the TV set) are also
shown in the EPG. Stations which carry
two different programmes (such as a
children’s programme in the daytime
and another programme in the evening)
must be stored in two different program-
me positions.
The collection operation is interrupted or
cancelled if:
- you switch the programme position
from terrestrial to SAT or vice versa;
- you call the "Picture in Picture" func-
tion;
- you open the Teletext function;
- a recording is programmed in the
menu "AV recording";
- a "timer recording" is running or will
begin within the next hour;
Not possible with an external satellite receiver!
46
Download from Www.Somanuals.com. All Manuals Search And Download.
23.3 Using NexTView
Call the menu
Once all of the data have been collected, pres-
sing the "F3" and ባ key displays the NexTView
programme guide, showing the programme cur-
rently running on this programme position.
The left column of the EPG shows the keys with
special functions in this mode:
F3
P+/P- Select a programme
2
OK
Watch the selected programme or set a
reminder for it
Cursor control key ̇ ̈ Scroll forward
Heute
20:07
or back through the programme times
- Mo Di Mi Do Fr Sa So + 13.08
20:00 RTL 2
RTL II News
20:00 ARD
Tagesschau
20:00 Nord 3
Tagesschau
20:00 West 3
Tagesschau
ꢀ
ꢀ
ꢀ
-20:15
0-9
Enter a time for which program-
mes are to be displayed
All programmes
Selection
-20:15
-20:15
-20:15
-20:15
TV
Return to the TV picture
Interest
Users
blue Display all programme types
yellow Display only programme types
which match the current user
and their preferences
20:00 3 SAT
Tagesschau
Record
0..9: enter time
:select
OK: view
News
white Set user preferences
green Select a user (father, mother,
teenager, child)
red
Selected programme is ready for recor-
ding (see Page 48)
Selecting and viewing a programme, setting a
reminder
In the EPG, you can select a programme with the
"P+/P-" rocker key.
• By pressing the "OK" key, you can
- watch the programme if it is already running or
- set a reminder for it if it starts later. In this case,
a green check mark appears after the start
time.
• Press the "TEXT" key to display or hide the des-
cription of the programme. This description
cannot be displayed for all programmes.
Not possible with an external satellite receiver!
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
23.3 Using NexTView
Setting the user
By repeatedly pressing the green key, you can set
the current user (father, mother, teenager, child)
for the NexTView programme guide.
Setting preferences
Each user can set the NexTView pro-
gramme guide to reflect the personal
preferences.
Music
Education
Children/School
Sport
Leisure
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
MDR
PRO 7
RTL 2
RTL
SAT 1
Bayern 3
ZDF
ARD
ꢀ
ꢀ
ꢀ
All programmes
Selection
• Press the white key
.
• Use the "P+/P-" rocker key to select
one of the blue cards.
• Use the cursor control key to switch to
the yellow page.
• Use the "P+/P-" rocker key to select
the appropriate yellow cards and
mark each one by pressing the "OK"
key.
Shows
Interest
Current affairs
Feature film
Station selection
Users
Record
Display all stations
Up to eight stations
can be selected
Up to eight preferences can be selected for
each user.
ꢀ
• You can remove the red check marks again by
pressing the "OK" key.
• Save the selected preferences by pres-
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
ꢁ
Music
water sports
motor sports
athletics
sing the red key
.
Education
Children/School
Sport
Leisure
Shows
Current affairs
Feature film
Station selection
ꢀ
ꢀ
ꢀ
All programmes
Selection
team sports
tennis/squash
football/soccer
sport magazine
special events
sport (general)
I
n
t
e
r
e
s
t
Users
Record
Select subjects
with
ꢁ
ꢁ
ꢁ
ꢁ
motor sports
ꢁsport magazine
ꢁspecial events
ꢁwinter sports
ꢁlocal sports
team sports
tennis/squash
football/soccer
and OK
Not possible with an external satellite receiver!
48
Download from Www.Somanuals.com. All Manuals Search And Download.
23.3 Using NexTView
Call the menu
Recording a programme
If you have a Metz video recorder with dialogue
system, the NexTView programme guide permits
you to start a recording by pressing a single key.
EPG
• Open the NexTView programme guide.
• Use the "P+/P-" rocker key to select the pro-
gramme you want to record.
If a video recorder with dialogue system is con-
nected:
OK
- Switch on the video recorder.
- Insert a cassette.
- Press the red key
the TV set.
If a normal video recorder is connected:
- Switch on the video recorder.
- Insert a cassette.
- Press the red key
control of the TV set - the TV timer is
programmed.
- On the video recorder programme a
timer with the date and time on the
AV programme position so that the
programme provided by the TV timer
will be recorded.
on the remote control of
Heute
20:07
- Mo Di Mi Do Fr Sa So + 13.08
20:00 RTL 2
RTL II News
20:00 ARD
Tagesschau
20:00 Nord 3
Tagesschau
20:00 West 3
Tagesschau
ꢀ
ꢀ
ꢀ
-20:15
All programmes
Selection
-20:15
-20:15
-20:15
-20:15
on the remote
Interest
Users
20:00 3 SAT
Tagesschau
Record
0..9: Zeit wählen
:auswählen
OK: ansehen
Nachrichten - News
If you want to record a programme from a
terrestrial station (received via antenna or
cable), you must programme the video
recorder itself.
ꢀ
Not possible with an external satellite receiver!
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Call the menu
24. Initial programme position
You can define a so-called initial programme
position in this TV set. This is intended primarily
to enable you to switch to the AV programme
position when you are using an external SAT
receiver.
MENU
Setting the initial programme position
OK
In a menu with two asterisks (**), the set-
tings for this menu item cannot be chan-
ged.
ꢀ
In the menu „AV devices“ (see also sec-
tion 22, „AV devices“), select and con-
nect a SAT receiver (SAT/SetTop).
• Press the „AV“ key.
• In the „AV playback menu“, use the
numeric keys to select the position
„SAT/SetTop“.
ꢀ
ꢀ
ꢀ
Operation
Picture-Volume
AV devices
Station table
Timer
Function for F3*
Function for F1*
EURO sockets*
Station search
Country*
EPG settings
Automatic zoom
Init. prog. position
Display configuration
Configuration
Language*
• Press the „MENU“ key to open the TV
menu.
: select menu
item
Switch on with this station? Yes
• Press the red key
„Configuration“.
to open the menu
• Use the cursor control key to select „Operation“
and then „Initial programme position“.
• Press the „OK“ key and then, in the setting win-
+
dow, use the
key to select „Yes“.
-
• Press the „OK“ key to save the new setting.
After this, the AV programme position will
be selected automatically if you switch
your TV set on with the main switch and
ꢀ
OK
then press the
trol unit.
key on the remote con-
* The number of subjects and sections
displayed here depends on the opera-
ting scope setting in the menu.
2) Available only on TV sets which are equipped
with this option.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
25. Operation without the
remote control unit
The following procedures are intended only for
cases where the batteries of the remote control
unit are exhausted or the remote control unit is
not available.
The TV controls are at the front of the set. Depen-
ding on the TV model, they are located underne-
ath a cover which can be opened by pressing at
the marked position.
-
P
+
P
F
Switching on
-
+
Press the main switch on the TV set to switch to
standby mode. To switch the set on with program-
me position 1 selected, press and hold the key F
or P until the green LED lights up.
You can also execute the following functions with
the controls on the front of the TV set. The prese-
lected function remains active for 10 seconds.
Changing programme positions:
Press the -/+ keys.
Volume:
Press the preselection key F or P until the bar
display for volume appears on the screen. Then
press the - or + key to adjust the volume.
Contrast:
Press the preselection key F or P until the bar
display for contrast appears on the screen. Then
press the - or + key to adjust the contrast.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
26. Technical data
Mains voltage:
230 V 50 / 60 Hz
˜
240 V (Australia only)
˜
Antenna input::
75 Ohms unbalanced
DIN 45325
Reception bands:
Standard channels 2 - 12,
21 - 69
Special channels S1 - S20,
S21 - S41,
S42 .. S46 (Belgium OIR channels)
Power
consumption:
2 x 12 W
(2 x 8 W)
Spectral-55
Astral-72 MK II
Astral-63
ca. 90 W
ca. 105 W
ca. 118 W
ca. 125 W
ca. 115 W
ca. 108 W
ca. 125 W
ca. 130 W
2 x 8 W
(2 x 5 W)
2 x 8 W
(2 x 5 W)
2 x 20 + 40 W
(2 x 12 + 24 W)
Spectral-70
Linea-72
2 x 12 W
(2 x 8 W)
Linea-70
Nordkap-70
2 x 12 W
(2 x 8 W)
Kreta-72
Spectral-82 MK II
2 x 20 + 40 W
(2 x 12 + 24 W)
2 x 20 + 40 W
(2 x 12 + 24 W)
Astral-82
Power consumption per hour:
See power consumption in Wh.
Standby mode: approx. 1.7 W
52
Download from Www.Somanuals.com. All Manuals Search And Download.
27. Options
• Satellite upgrade kit 081 NH 1017
for reception of satellite stations without the need
for a separate SAT receiver.
• Satellite upgrade kit 083 NH 1014
similar to the above, but also capable of recei-
ving unencrypted ADR (Astra Digital Radio) sta-
tions.
• DVB-S upgrade kit 024 NK 1029 or
024 NL 1126
for reception of analogue and digital satellite sta-
tions broadcasting TV, radio and Astra Digital
Radio (ADR) programmes without the need for a
separate SAT receiver.
• DVB-T upgrade kit 056 NH 1114 (CI)
for the reception of digitally transmitted terrestrial
TV and radio stations which can be received with
a rod antenna or a terrestrial house antenna
without the need for an separate receiver.
For other upgrade kits, please consult your local
dealer.
Important note for users of the TV set:
Unauthorised modification of this TV set, in parti-
cular changing the high voltage or using a CRT of
a different type, can result in the emission of high
levels of X-ray radiation. TV sets modified in this
manner no longer conform to the official appro-
val for operation and may not be used.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
28. Connecting headphones
The headphone socket is located on the front of
the TV set. On many models, you must first open
a cover by pressing at the marked location in
order to expose the socket.
We recommend using headphones with an impe-
dance of at least 32 Ω. The use of headphones
with a lower impedance (about 8 Ω) will reduce
the dynamic range.
The headphone volume can be saved as one of
the standard settings. In the case of dual-langua-
ge programmes, you can listen to either sound
channel 1 or 2 on the headphones, regardless of
the channel selected for the loudspeakers.
29. Cleaning the TV set
Always switch off the TV set with the main
switch before cleaning it!
ꢀ
Clean the case of the TV set only with a soft, dry
(or slightly moistened) cloth. Do not use aggressi-
ve detergents or scouring powders, since these
could damage the paintwork and/or remove the
inscriptions. Clean the screen with a moist win-
dow leather.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
30. Glossary
AV programme position
AV devices have one or more sockets, depending
on the model. These sockets are labelled on the
device, for example with AV1.
These sockets can be selected on the AV device
and the selected socket is shown on the display of
the AV device, for example A1 for socket AV1.
Comb filter
In conventional TV sets, the luminance signal and
the chrominance information are separated from
each other with a frequency separating filter.
However, this means that a certain amount of the
luminance signal is still included in the colour sig-
nal and can cause interference (cross-luminance)
and that a certain amount of the colour signal
causes interference in the luminance signal (cross-
colour). The comb filter prevents these problems.
Just like a comb, this filter extracts the colour sig-
nal, which is located in the gaps of the luminance
signal, without affecting the bandwidth of the
luminance signal. The result is a TV picture with
the maximum possible resolution and without
cross-colour or cross-luminance interference.
Code
The settings for the childlock are protected by a 4-
digit numerical code which you can set a desired.
Write down or remember the code you define. If
you forget the code, ask your local dealer for assi-
stance
CTI
The CTI (Colour Transient Improvement) circuit is
an electronic circuit which ensures precise transi-
tions between differently coloured parts of the pic-
ture, preventing the colour smearing which could
otherwise occur. The CTI function is active for pro-
grammes received via the antenna input and for
picture signals from AV devices.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
30. Glossary
Forced mono
In some cases, your TV set may switch from mono
to stereo during a programme, although the sta-
tion is not transmitting a stereo signal. This is nor-
mally due to the local reception conditions. If you
activate „forced mono“ for the selected program-
me positions, all programmes will be reproduced
in mono, regardless of the received signal.
Noise reduction
This setting can be used to improve the quality of
pictures with „snow“ or other noise resulting from
poor reception conditions. Depending on the
amount of interference, various correction facilities
are available and the noise reduction can be set
individually for each programme position.
Panorama
The panorama function permits "normal" pro-
grammes in 4:3 format to be adapted to the 16:9
format of the CRT. This is done by expanding the
width of the picture to fill the entire width of the
screen.
Rotation
This function can be used to compensate for the
Earth’s magnetic field. It may be needed when the
TV set is first installed, or if the TV set is moved to
a different location, and the picture is not aligned
horizontally on the screen.
Stereo wide
When receiving programmes with stereo sound,
the physical distance between the loudspeakers
can be increased artificially to improve the stereo
effect.
Standard settings
Standard settings are all values (such as bright-
ness, volume, chrominance, etc.) which are the
same for all programme positions.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
30. Glossary
Spatial sound
An artificial stereo effect can be generated for
mono transmissions.
SRS WOW
WOW, a special combination of audio technolo-
gies from SRS Labs, Inc., creates a unique liste-
ning experience, complete with deep rich bass,
and fuller, better sounding audio. When the
WOW function is activated, it restores many of
the spatial cues and ambient information that are
lost during standard stereo playback.
In normal TV mode, the WOW function can be
preselected with the yellow key (sound functions)
+
and then switched on or off with the
key.
-
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license
from SRS Labs, Inc.
Tone settings
You can switch the tone settings between „Nor-
mal“ and „Speech“.
Volume correction
The sound signals from different stations may vary
considerably in their volume. You can correct the
volume of a particularly loud or soft station so that
it is similar to that of the other stations. The volume
correction remains active even when the standard
values are recalled.
VCR
The VCR function ensures optimum picture quality
when playing back recordings from tape devices
such as camcorders and video recorders.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible cause
Remedy
The TV set does not • There is no visual contact bet- • Ensure that there are no
react to commands
from the remote con-
trol unit.
ween the remote control unit
and the TV set.
• Sunlight is falling directly on
the infrared of the TV set.
obstacles.
• Avoid direct exposure
to sunlight.
• Replace the batteries.
• Switch on the TV set
with the mains switch.
• Switch the TV set off
with the mains switch
and then switch it on
again.
• The batteries in the remote
control unit are exhausted.
• The TV set has been switched
off with the mains switch.
• The microprocessor is faulty.
Unnatural colours,
coloured spots on
the screen
• Strong magnetic fields in the
vicinity of the TV set (from
loudspeakers or other devices)
• Move the loudspeakers
away from the TV set.
• If the coloured spots per-
sist, switch the TV set off
with the mains switch, wait
a few seconds and then
switch it on again.
After the TV set has • The childlock function has
• Enter the code number
with which the childlock
function was pro-
grammed.
been switched on,
the message „Please
enter code“ is
been programmed to prevent
selection of any station.
displayed.
The TV set does not
switch to the selected
programme position.
Instead, a list of sta-
tions is displayed with
a teddy-bear symbol.
• The childlock function has
been programmed to permit
selection of only the stations
shown in the list.
• Enter the code number
with which the childlock
function was pro-
grammed.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Possible cause
Immediate recording • The Data Logic video recorder • Connect the Data Logic
Remedy
Problem
of a terrestrial sta-
tion (received via
your house antenna
or cable) with Data
Logic does not work.
is not connected to the house
antenna or cable outlet.
video recorder to the
house antenna or cable
outlet with the aid of an
antenna cable.
General problems
with an external AV
device connected to
the TV set.
• The AV device has not been
set up correctly in the TV set.
• In the menu „AV devi-
ces“, select the appro-
priate device with the
cursor, set the „Signal
OUT/IN“ accordingly
and press the „OK“ key.
Connect the AV device
only as shown in the
connection diagram.
Data Logic does not • The Data Logic video recorder • In the menu „AV devi-
work.
with data interchange has not
been set up correctly in the TV
set.
ces“, define the Data
Logic video recorder as
video recorder 1 with
„Datalogic ON“.
• The Data Logic video recorder • Connect the Data Logic
is not connected to the EURO1
socket.
video recorder to the
EURO1 socket with a
Scart cable.
• The Euro-AV (Scart) cable
being used does not have all
21 pins connected.
• Use a Euro-AV (Scart)
cable with all 21 pins
connected.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Automatic station search . . . . . . . . . . . . . . .14
Automatic zoom . . . . . . . . . . . . . . . . . . . . .26
AV devices, connecting . . . . . . . . . . . . . . . . .39
AV programme position . . . .27, 40, 49, 50, 55
AV picture-in-picture (PIP) . . . . . . . . . . . . . . .33
AV playback, devices with switching voltage .41
AV playback, devices without switching voltage .42
Batteries for remote control unit . . . . . . . . . . .6
Camcorder, connecting . . . . . . . . . . . . . . . .39
Channel frequency setting . . . . . . . . . . . . . .16
Childlock . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Cleaning the TV set . . . . . . . . . . . . . . . . . . .54
Code for childlock . . . . . . . . . . . . . . . . . . . .28
Colour standard . . . . . . . . . . . . . . . . . . . . .25
Comb filter . . . . . . . . . . . . . . . . . . . . . . . . .55
Connecting external devices . . . . . . . . . . . . .39
Copying . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Country . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
CTI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Cursor . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 9
Data Logic video recorder . . . . . . . . . . .40, 60
Decoder, connecting . . . . . . . . . . . . . . . . . . .39
Display configuration . . . . . . . . . . . . . . . . . .26
Double font size . . . . . . . . . . . . . . . . . . . . . .37
DVD player, connecting . . . . . . . . . . . . . . . .39
Electronic Program Guide (EPG) . . . . . . .44-49
EURO sockets . . . . . . . . . . . . . . . . . . . . .40,41
External devices, connecting . . . . . . . . . . . . .39
External devices (playback) . . . . . . . . . . .41,42
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . .16
Font, double size . . . . . . . . . . . . . . . . . . . . .37
Forced mono . . . . . . . . . . . . . . . . . . . . . . . .57
Freeze frame . . . . . . . . . . . . . . . . . . . . . . . .7
Function keys . . . . . . . . . . . . . . . . . . . . . . . .32
Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . .55
Headphones . . . . . . . . . . . . . . . . . . . . . . . .54
Help function . . . . . . . . . . . . . . . . . . . . . . . . .8
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Info (information) . . . . . . . . . . . . . . . . . . . . . .8
Initial programme position . . . . . . . . . . . . . .50
Language for TV menu . . . . . . . . . . . . . . . . .13
Marks in Teletext . . . . . . . . . . . . . . . . . . . . .37
Marks, index . . . . . . . . . . . . . . . . . . . . . . . .37
Marks, setting and deleting . . . . . . . . . . . . . .37
Menu language . . . . . . . . . . . . . . . . . . . . . .13
Menus, menu control . . . . . . . . . . . . . . . . . . .9
Multiple pages, sub-pages . . . . . . . . . . . . . .36
NexTView . . . . . . . . . . . . . . . . . . . . . . .44-49
NexTView recording . . . . . . . . . . . . . . . . . .49
Noise reduction . . . . . . . . . . . . . . . . . . . . . .56
Peripheral devices . . . . . . . . . . . . . . . . . . . .39
Picture format . . . . . . . . . . . . . . . . . . . . . . .35
Picture-in-picture (PIP) with AV devices . . . . . .33
Picture quality for video recorder . . . . . . . . .42
Picture settings . . . . . . . . . . . . . .10, 10, 21, 22
Picture sharpness . . . . . . . . . . . . . . . . . .20, 21
Playback from external devices . . . . . . . .41, 42
Programme change for AV devices . . . . . . . .41
Programme selection . . . . . . . . . . . . . . . . . .19
Recording programmes with NexTView (EPG) 49
Reminder . . . . . . . . . . . . . . . . . . . . . . . . . .30
Riddle solution key . . . . . . . . . . . . . . . . . . . .37
Rotation . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Scrolling by marks . . . . . . . . . . . . . . . . . . . .37
Setting window . . . . . . . . . . . . . . . . . . . . . . .9
Signal type (EURO sockets) . . . . . . . . . . .40, 41
Sleep timer . . . . . . . . . . . . . . . . . . . . . . . . .30
Sound 1, sound 2 . . . . . . . . . . . . . . . . .23, 54
Sound effects (see stereo wide or spatial sound)
Sound settings . . . . . . . . . . . . . . . . . . . .23, 24
Spatial sound . . . . . . . . . . . . . . . . . . . . . . .56
SRS-WOW . . . . . . . . . . . . . . . . . . . . . .23,57
Standard picture settings . . . . . . . . . . . . . . .20
Standard sound values . . . . . . . . . . . . . . . . .23
Standard time . . . . . . . . . . . . . . . . . . . . . . .31
Standard values . . . . . . . . . . . . . . . . . . .20, 56
Station logos . . . . . . . . . . . . . . . . . . . . . . . .17
61
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Station search . . . . . . . . . . . . . . . . . . . . . . .15
Station search, automatic . . . . . . . . . . . . . . .14
Stations, deleting . . . . . . . . . . . . . . . . . . . . .18
Stations, selecting . . . . . . . . . . . . . . . . . . . .18
Stations, shifting . . . . . . . . . . . . . . . . . . . . .18
Stations: shifting, copying and deleting . . . . .18
Stereo wide . . . . . . . . . . . . . . . . . . . . . . . . .55
Subtitles . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Summer time . . . . . . . . . . . . . . . . . . . . . . . .31
Switching voltage, devices with . . . . . . . . . . .41
Switching voltage, devices without . . . . . . . . .45
Switch-off time . . . . . . . . . . . . . . . . . . . . . . .30
Switch-on time . . . . . . . . . . . . . . . . . . . . . . .30
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Teletext, font size . . . . . . . . . . . . . . . . . . . . .37
Thunderstorm . . . . . . . . . . . . . . . . . . . . . . . .4
Timer control . . . . . . . . . . . . . . . . . . . . . . . .31
Transferring recordings between two devices .43
TV menu . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
VCR function . . . . . . . . . . . . . . . . . . . . . . . .42
Video recorder - programme position,
automatic selection . . . . . . . . . . . . . . . . . . . .41
Video recorder, connecting . . . . . . . . . . . . . .39
Video cassettes, playing back . . . . . . . . .41, 43
Volume correction . . . . . . . . . . . . . . . . .24, 56
Winter time . . . . . . . . . . . . . . . . . . . . . . . . .31
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
62
Download from Www.Somanuals.com. All Manuals Search And Download.
✍
✍
63
Download from Www.Somanuals.com. All Manuals Search And Download.
³
ᕢ
ᕣ
ᕤ
³
ᕢ
ᕣ
ᕤ
ᕥ
ᕦ
ᕧ
Service Centre
Training Centre
Administration and development
Storage/Dispatch
Mecablitz production
TV production
ᕥ
ᕧ
ᕦ
Plastics technology
Metz - Werke GmbH & Co. KG - Zirndorf near Nürnberg
Core competence in the areas of electronics and plastics
technology to form the basis of the excellent reputation of the
Metz Werke that has been built up throughout the world over
a period of many decades.
Metz offers quality made in Germany:
Consumer electronics, mecablitz flash units,
plastics technology and industrial electronics.
Metz-Werke GmbH & Co. KG
Postfach 1267, D-90506 Zirndorf
Fon: +49 911 - 97060
Fax: +49 911 - 9706340
Errors excepted. Subject to changes.
ķ
Printed in Germany
Metz - allways first class.
Download from Www.Somanuals.com. All Manuals Search And Download.
|