INSTALLATION INSTRUCTIONS FOR PART 95-7321
APPLICATIONS
Hyundai Accent 2006-2010
Kia Rio / RIO 5 2006-2010
Kia Sportage 2005-2010
95-7321
KIT FEATURES
• DDIN Head Unit Provision
• ISO Stacked Head Unit Provision
KIT COMPONENTS
A) DDIN Brackets B) DDIN Trim Plate
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
HARNESS:
• 70-7303 - Hyundai / Kia Harness 2009
• 70-1004 - Hyundai 2006-up/KIA harness 2004-up
ANTENNA ADAPTER:
• 40-KI11 - KIA antenna adapter 2007-up
• 40-KI10 - KIA antenna adapter 2007-up
A
B
TOOLS REQUIRED:
Phillips Screwdriver • Small Flat Blade Screwdriver • Panel Removal Tool • Cutting Tool
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
DASH DISASSEMBLY
95-7321
HYUNDAI ACCENT 2006-2010
KIA RIO / RIO 5 2006-2010
A
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
2
Unclip and remove the trim panel
surrounding the radio and including
the a/c vents. (Figure A)
Remove (4) Phillips screws securing
3
the radio. (Figure B)
B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
DASH DISASSEMBLY
95-7321
KIA SPORTAGE 2005-2010
A
Disconnect the negative battery
terminal to prevent an accidental
short circuit.
1
2
Unclip and remove the entire panel
surrounding the radio and including
the A/C controls. Note: Start at
bottom of panel. (Figure A)
Remove (4) Phillips screws to extract
3
radio from dash. (Figure B)
B
2
Download from Www.Somanuals.com. All Manuals Search And Download.
KIT PREPARATION
95-7321
A
HYUNDAI ACCENT: Cut and remove
1
shaded areas. (Figure A)
B
KIA RIO: Cut and remove shaded
2
areas. (Figure B)
B
KIA SPORTAGE: Cut and remove
3
shaded areas. (Figure C)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
KIT ASSEMBLY
95-7321
DOUBLE DIN / STACKED ISO DIN
HEAD UNIT PROVISION
Locate the factory wiring harness in
A
1
the dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the unit for proper operation.
Attach the Double DIN brackets to
the inside edge of the Double DIN
trim plate. (Figure A)
2
3
Slide the Double DIN head unit or
stacked ISO head units into the
bracket/radio housing assembly and
secure the Double DIN head unit or
stacked ISO head units to the
B
assembly using the screws supplied
with the radio. (Figure B)
Reassemble dash in reverse order of
disassembly.
4
4
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7321
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
95-7321 INSTRUCTIONS
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2010 METRA ELECTRONICS CORPORATION
INST95-7321
REV. 04/26/10
Download from Www.Somanuals.com. All Manuals Search And Download.
|