Metra Electronics Automobile Accessories 99 6510 User Manual

INSTALLATION INSTRUCTIONS FOR PART 99-6510  
APPLICATIONS  
Chrysler  
300  
2005-2007  
2007  
Aspen  
Dodge  
Jeep  
Caliber  
2007-2008  
Commander  
2006-2007  
2007-2008  
Charger 2005-2007  
Durango 2005-2007  
Magnum 2005-2007  
Ram 1500 2006-2008  
Ram 2500/3500 2006-2008  
Compass  
Grand Cherokee 2005-2007  
Patriot  
2007-2008  
Designed For Vehicles With Factory Navigation Radios  
Using this kit in vehicles without factory navigation requires the purchase of a factory  
navigation radio trim panel from your local Chrysler, Dodge or Jeep parts department.  
99-6510  
KIT FEATURES  
• DIN Radio Provision with Pocket  
• ISO DIN Radio Provision with Pocket  
• Double DIN Radio Provision  
• Stacked ISO Units Provision  
KIT COMPONENTS  
A) Radio Housing • B) ISO Brackets • C) ISO Trim Plate • D) Double DIN Brackets • E) Pocket • F) Double DIN Trim Plate  
C
D
E
B
WIRING AND ANTENNA CONNECTIONS (Sold Separately)  
Wiring Harness:  
A
• XSVI-6502-NAV - Chrysler CAN R.A.P. interface 2004-up  
• CHTO-01 - Chrysler CAN amp interface 2004-up  
Antenna Adapter:  
F
• 40-CR10 - Chrysler antenna adapter 2004-up  
TOOLS REQUIRED:  
Small Flat Blade Screwdriver or  
• Panel Removal Tool  
Phillips Screwdriver • Socket Wrench •  
• Cutting Tool  
1-800-221-0932  
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
CHRYSLER ASPEN 2007  
DODGE DURANGO 2005-2007  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Remove (2) 7MM screws from the inside  
of the pocket facing upward. (Figure A)  
B
3
Unclip and remove the entire trim panel  
surrounding the radio and climate controls.  
(Figure B)  
4
5
Remove (4) 7MM screws securing radio  
to dash and remove radio. (Figure C)  
C
Continue to kit assembly.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
DODGE CHARGER 2005-2007  
DODGE MAGNUM 2005-2007  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Unclip and remove entire panel surrounding  
radio and climate controls, including a/c  
vents. (Figure A)  
B
3
4
Remove (4) 7MM screws securing radio  
to dash and remove radio. (Figure B)  
Continue to kit assembly.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
CHRYSLER 300 2005-2007  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Unclip and remove entire panel surround-  
ing radio and climate controls, including  
a/c vents and clock. (Figure A)  
3
4
Remove (4) 7MM screws securing radio  
to dash and remove radio. (Figure B)  
B
Continue to kit assembly.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
DODGE RAM 1500 2006-2008  
WITHOUT CENTER CONSOLE  
RAM 2500/3500 2006-2008  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Open cup holder and remove (2) Phillips  
screws facing up on front edge of  
radio/climate control panel. (Figure A)  
B
3
Unclip and remove entire panel sur-  
rounding radio and climate controls,  
including a/c vents. (Figure B)  
4
5
Remove (4) 7MM screws securing radio  
to dash and remove radio.  
Continue to kit assembly.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
DODGE RAM 1500 2006-2008  
WITH MINI CENTER CONSOLE  
RAM 2500/3500 2006-2008  
Disconnect the negative battery terminal  
1
2
A
to prevent an accidental short circuit.  
If vehicle has floor shifter, remove shifter  
knob.  
Remove center console inserts, if present.  
(Figure A)  
3
4
Remove screws securing the rear center  
console to the floor panel. Lift up on the  
rear center console to clear the gear shift  
B
lever, if present. (Figure B)  
Remove screws securing the front center  
console to the floor panel. Unclip and  
remove the front center console.  
(Figure C)  
5
Loosen two 8 mm screws at bottom of  
dash. Unsnap lower panel.  
6
7
Remove (2) Phillips screws facing up on  
front edge of radio/climate control panel.  
(Figure D)  
C
8
9
Unclip and remove entire panel sur-  
rounding radio and climate controls,  
including a/c vents. (Figure E)  
Remove (4) 7MM screws securing radio  
to dash and remove radio.  
Continue to kit assembly.  
D
E
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
DODGE RAM 1500 2006-2008  
WITH FULL CENTER CONSOLE  
RAM 2500/3500 2006-2008  
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
A
If vehicle has floor shifter, remove shifter  
knob.  
Unsnap and remove console front top  
cover (closest to the dash). (Figure A)  
3
4
Remove two 8 mm screws from under  
console cover (previously removed).  
Remove front section of console.  
(Figure B)  
B
5
6
Loosen two 8 mm screws at bottom of  
dash. Unsnap lower panel.  
Remove (2) Phillips screws facing up on  
front edge of radio/climate control panel.  
(Figure C)  
C
D
7
Unclip and remove entire panel surrounding  
radio and climate controls, including a/c  
vents. (Figure D)  
8
9
Remove (4) 7MM screws securing radio  
to dash and remove radio.  
Continue to kit assembly.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
JEEP GRAND CHEROKEE 2005-2007  
A
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Unsnap and remove panel from around  
radio including the vent on each side.  
(Figure A)  
B
3
4
Remove (4) 7MM screws securing radio  
to dash and remove radio. (Figure B)  
Continue to kit assembly.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
DODGE CALIBER 2007-2008  
JEEP COMPASS 2007-2008  
JEEP PATRIOT 2007-2008  
A
Disconnect the negative battery terminal  
1
to prevent an accidental short circuit.  
Unsnap and move shifter trim to the side.  
(Figure A)  
2
3
1
2
3
4
5
6
P
R
N
D
L
(Compass and Patriot only) Unsnap and  
remove top center dash panel above AC  
vents.  
D
L
4
5
Unsnap center dash trim panel (do not  
remove until climate controls are  
removed). (Figure A)  
Remove (4) Phillips screws holding  
climate control panel to backside of  
the center dash panel.  
6
7
Remove (4) 7MM screws securing radio.  
Unplug and remove radio.  
Continue to kit assembly.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
DASH DISASSEMBLY  
99-6510  
JEEP COMMANDER 2006-2007  
Disconnect the negative battery terminal  
to prevent an accidental short circuit.  
1
2
Remove the (16) screws securing the  
radio trim panel. (Figure A)  
A
4
screws  
4
screws  
4
screws  
4
screws  
3
Unclip and remove the entire radio trim  
panel. (Figure B)  
B
4
5
Remove (4) 7MM screws securing radio to dash and remove radio.  
Continue to kit assembly.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
KIT ASSEMBLY  
99-6510  
DIN RADIO PROVISION WITH POCKET  
A
Slide the DIN cage into the radio  
housing and secure by bending the  
metal locking tabs down. (Figure A)  
1
2
Slide the aftermarket radio into the  
cage until secure. (Figure B)  
Snap the pocket into the radio  
housing. (Figure C)  
3
B
4
Continue to final assembly.  
C
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KIT ASSEMBLY  
99-6510  
ISO RADIO PROVISION WITH POCKET  
A
Mount the ISO Brackets to the  
radio with the screws supplied  
with the unit. (Figure A)  
1
2
Slide the radio into the radio  
opening until the side clips  
engage. (Figure B)  
Snap the ISO Trim Plate into the  
radio housing. (Figure C)  
3
4
B
Snap the pocket into the radio  
housing. (Figure C)  
5
Continue to final assembly.  
C
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KIT ASSEMBLY  
99-6510  
DOUBLE DIN RADIO PROVISION  
A
Cut and remove center divider in  
radio housing. (Figure A)  
1
2
Snap the DDIN brackets to the  
inside edge of the radio housing.  
(Figure B)  
Slide the DDIN radio unit into the  
DDIN bracket/radio housing  
3
assembly and secure the radio unit  
to the kit using the screws sup-  
B
plied with the radio unit. (Figure C)  
Snap the DDIN trim-plate onto the  
housing/radio assembly. (Figure D)  
4
5
Continue to final assembly.  
D
C
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KIT ASSEMBLY  
99-6510  
STACKED ISO UNITS PROVISION  
A
Cut and remove center divider in  
radio housing. (Figure A)  
1
2
Snap the DDIN brackets to the  
inside edge of the radio housing.  
(Figure B)  
Slide the stacked ISO DIN radio  
units into the DDIN bracket/radio  
housing assembly and secure the  
unit to the kit using the screws  
supplied with the units. (Figure C)  
3
B
Snap the DDIN trim-plate onto the  
housing/radio assembly. (Figure D)  
4
5
Continue to final assembly.  
C
D
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FINAL ASSEMBLY  
99-6510  
FINAL ASSEMBLY  
A
B
A)  
B)  
C)  
D)  
Strip wire ends back 1/2"  
Twist ends together  
Solder  
Tape  
C
D
Locate the factory wiring harness in the dash. Metra recommends using the  
proper mating adapter and making connections as shown.  
(Isolate and individually tape off the ends of any unused wires to prevent  
electrical short circuit.)  
1
Re-connect the negative battery terminal and test the unit for proper operation.  
2
3
Reassemble radio and dash assemblies in reverse order of disassembly.  
FINAL WIRING CONNECTIONS  
Make wiring connections using the EIA color code chart shown below and the instructions included with the head unit. Metra  
recommends making connections as shown below; Strip, Splice, Solder, Tape. Isolate and individuallytape off ends of any  
unused wires to prevent electrical short circuit.  
METRA / EIA WIRING CODE  
12V Ignition / Acc . . . Red  
Dimmer . . . . . . . . . . Orange / White  
Right Front (+) . . . . . White  
12V Batt / Memory . . Yellow  
Ground . . . . . . . . . . . Black*  
Power Antenna . . . . . Blue  
Left Front (-). . . . . . . White / Black  
Right Rear (+). . . . . . Violet  
Amp Turn-On . . . . . . Blue / White  
Amp Ground . . . . . . . Black / White  
Illumination. . . . . . . . Orange  
Right Rear (-) . . . . . . Violet / Black  
Left Rear (+). . . . . . . Green  
Left Rear (-) . . . . . . . Green / Black  
*NOTE: When Black a wire is not present, ground radio to vehicle chassis. All colors may not be present on all leads due to  
manufacturer’s specifications.  
1-800-221-0932  
REV. 06/02/09  
© COPYRIGHT 2004-2009 METRA ELECTRONICS CORPORATION  
INST99-6510  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lennox International Inc Furnace G61MP User Manual
Lexmark All in One Printer 854e MFP User Manual
LG Electronics Flat Panel Television 22LF4520 User Manual
Life Fitness Bicycle C15 User Manual
Life Fitness Home Gym G4 GLPA 001 User Manual
Lightolier Indoor Furnishings TSF Series User Manual
Lux Products Thermostat PSP722E User Manual
Mackie Headphones 18S User Manual
Magnavox Cassette Player AQ 6481 User Manual
Marshall electronic Computer Monitor V R84DP 2SDI User Manual