INSTALLATION INSTRUCTIONS FOR PART 99-7339
APPLICATIONS
HYUNDAI GENESIS COUPE 2.0
2010
99-7339B
99-7339S
KIT FEATURES
• ISO Head Unit Provision with Pocket
• Painted to match factory finish
99-7339B=Black 99-7339S=Silver
KIT COMPONENTS
A) Trim Panel B) ISO Brackets C) Pocket D) (6) PC-7503 Panel Clips E) (4) 3/8” Phillips Screws
C
D
B
A
WIRING AND ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness:
• 70-7303 - Kia/Hyundai Harness 2009 -up
Antenna Adapter:
• 40-KI11 - Kia/Hyundai Antenna Adapter 2007-up
E
TOOLS REQUIRED:
• Small Flat Blade Screwdriver • Phillips Screwdriver
• Panel Removal Tool • Socket Wrench
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
© COPYRIGHT 2007-2010 METRA ELECTRONICS CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339 DASH DISASSEMBLY
HYUNDAI GENESIS COUPE 2010
A
1
Disconnect the negative battery ter-
minal to prevent an accidental short
circuit.
2
3
Unclip and remove the shifter trim
panel. (Figure A)
Unclip and remove the radio/climate
control trim panel. (Figure B)
4
Unclip and remove the display trim
panel above radio. (Figure C)
B
5
6
Remove (4) Phillips screws securing
the radio.
Remove (4) Phillips screws securing
the climate control to the factory trim
panel.
C
1
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339 KIT PREPARATION
KIT PREPARATION
HYUNDAI GENESIS COUPE 2010
A
1
2
Attach the climate control to the 95-
7336S trim plate using the factory
hardware. (Figure A)
Attach the (6) panel clips to the 95-
7336S trim plate. (Figure B)
B
Continue to kit assembly
2
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339 KIT ASSEMBLY
HYUNDAI GENESIS COUPE 2010
ISO DIN HEAD UNIT PROVISION
A
1
2
Locate the factory wiring harness in
the dash. Metra recommends using
the proper mating adapter from Metra
or AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
Attach the ISO brackets to the after-
market radio (figure A), then secure
the assembly to the pocket using the
(4) supplied Phillips screws (figure B).
3
4
Mount the assembly into the sub
dash.
B
Reassemble dash in reverse order of
disassembly using the 99-7339 trim
panel instead of the factory trim
panel.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339
NOTES
Download from Www.Somanuals.com. All Manuals Search And Download.
99-7339 INSTRUCTIONS
INSTRUCTIONS
306
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932
REV. 12/15/09 © COPYRIGHT 2003-2010 METRA ELECTRONICS CORPORATION INST99-7339
Download from Www.Somanuals.com. All Manuals Search And Download.
|