Memorex TV DVD Combo MVD2019 User Manual

OWNER’S MANUAL  
MANUAL DE INSTRUCCIONES  
COMBINATION 19” COLORTELEVISION  
AND DVD/CD PLAYER  
COMBINACION DE 19TELEVISOR A COLOR  
CON DVD/DISCOS COMPACTOS  
MVD2019  
ATTENTION  
ATENCION  
If you purchase a universal remote control from your local retailer, please contact the  
remote manufacturer for the required programming code.  
Si usted a comprado un control remoto universal, por favor comunicace con el fabricante  
para el codico de programaccion requerido.  
TV/CATV MODE SELECTION  
SELECCION DE MODO DE TV/CATV  
When shipped from the factory, the TV/CATV menu option is set to the "CATV" (Cable  
Television) mode.  
If not using CATV (Cable TV), set this menu option to the "TV" mode.  
Al salir la unidad de fábrica, la opción de menú de TV/CATV se ajusta al modo de  
"CATV" (Televisión por cable).  
Si no utiliza CATV, ajuste esta opción de menú al modo de "TV".  
Before operating the unit, please read this manual thoroughly.  
Antes de usar la unidad, lea detenidadmente este manual de instrucciones.  
5E80301A E (Cover)  
1
22/01/2003, 21:39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
1. READ INSTRUCTIONS  
All the safety and operating instructions should be read before the unit is operated.  
2. RETAIN INSTRUCTIONS  
The safety and operating instructions should be retained for future reference.  
3. HEED WARNINGS  
All warnings on the unit and in the operating instructions should be adhered to.  
4. FOLLOW INSTRUCTIONS  
All operating and use instructions should be followed.  
5. CLEANING  
Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.  
Use a damp cloth for cleaning the exterior cabinet only.  
6. ATTACHMENTS  
The manufacturer of this unit does not make any recommendations for attachments, as they may cause  
hazards.  
7. WATER AND MOISTURE  
Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet  
basement, or near a swimming pool.  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
8. ACCESSORIES  
Do not place this unit on an unstable cart, stand, tripod, bracket, or table.  
The unit may fall, causing serious injury, and serious damage to the unit.  
8A. An appliance and cart combination should be moved with care. Quick stops,  
excessive force, and uneven surfaces may cause the appliance and cart  
combination to overturn.  
9. VENTILATION  
Slots and openings in the cabinet back or bottom are provided for ventilation,  
and to ensure reliable operation of the unit, and to protect it from overheating.  
S3126A  
These openings must not be blocked or covered. The openings should never be blocked by placing the unit  
on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat  
source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have been adhered to.  
10. POWER SOURCE  
This unit should be operated only from the type of power source indicated on the rating plate. If you are not  
sure of the type of power supply to your home, consult your appliance dealer or local power company. For  
units intended to operate from battery power, or other sources, refer to the respective pages on this Own-  
er's Manual for their operating instructions.  
11. GROUNDING OR POLARIZATION  
This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the  
other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert  
the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to  
replace your obsolete outlet. Instead of the polarized alternating-current line plug, your unit may be  
equipped with a 3-wire grounding-type plug (a plug having a third (grounding) pin). This plug will only fit into  
a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the  
outlet, contact your electrician to replace your obsolete outlet.  
Do not defeat the safety purpose of the grounding-type plug.  
3
5E80301A E (02-05)  
3
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
12. POWER-CORD PROTECTION  
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point  
where they exit from the appliance.  
13. LIGHTNING  
To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time,  
unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the  
unit due to lightning and power line surges.  
14. POWER LINES  
An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall onto or against such power lines or circuits. When installing an  
outside antenna system, extreme care should be taken to keep from touching such power lines or circuits,  
as contact with them might be fatal.  
15. OVERLOADING  
Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
16. OBJECT AND LIQUID ENTRY  
Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code (NEC), ANSI/NFPA 70, provides information with respect to proper grounding of  
the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of  
grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and require-  
ments for the grounding electrode.  
18. SERVICING  
Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service personnel.  
For example:  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the unit.  
c. If the unit has been exposed to rain or water.  
d. If the unit does not operate normally by following the operating instructions. Adjust only those  
controls that are covered by the operating instructions, as an improper adjustment of other controls  
may result in damage and will often require extensive work by a qualified technician to restore the  
unit to its normal operation.  
e. If the unit has been dropped or the cabinet has been damaged.  
f. When the unit exhibits a distinct change in performance, this indicates a need for service.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
21. HEAT  
The product should be situated away from heat sources such as radiators, heat registers, stoves, or other  
products (including amplifiers) that produce heat.  
22. DISC TRAY  
Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury.  
23. CONNECTING  
When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
24. SOUND VOLUME  
Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  
sound may cause hearing or speaker damage.  
4
5E80301A E (02-05)  
4
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFEGUARDS  
25. SOUND DISTORTION  
Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire.  
26. HEADPHONES  
When you use the headphones, keep the volume at a moderate level. If you use the headphones continu-  
ously with high volume sound, it may cause hearing damage.  
27. LASER BEAM  
Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the  
laser beam. It may cause sight damage.  
28. DISC  
Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious  
personal injury and product malfunction.  
29. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD  
IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
ELECTRIC SERVICE  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
5
5E80301A E (02-05)  
5
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on discs  
On handling discs  
Structure of disc contents  
Normally, DVD video discs are divided into titles, and  
the titles are sub-divided into chapters. AUDIO CDs are  
divided into tracks.  
Do not touch the playback side of the disc.  
DVD video disc  
DVD video disc  
Title 1  
Title 2  
Chapter 1 Chapter 2  
Chapter 1 Chapter 2 Chapter 3  
Playback side  
Do not attach paper or tape to discs.  
AUDIO CD  
AUDIO CD  
Track 1  
Track 2  
Track 3  
Track 4  
Track 5  
On cleaning discs  
Each title, chapter or track is assigned a number, which  
is called “title number”, “chapter number” or “track  
number” respectively.  
Fingerprints and dust on the disc cause picture and  
sound deterioration. Wipe the disc from the center  
outwards with a soft cloth. Always keep the disc  
clean.  
There may be discs that do not have these numbers.  
Notes on copyright  
It is forbidden by law to copy, broadcast, show,  
broadcast on cable, play in public, and rent copyrighted  
material without permission.  
This device does not tape-record copy protected DVD  
Video Discs.  
The device is not to be used for copying copyrighted  
content without the express written permission of the  
copyright owner.  
If you cannot wipe off the dust with a soft cloth, wipe  
the disc lightly with a slightly moistened soft cloth and  
finish with a dry cloth.  
Do not use any type of solvent such as thinner,  
benzine, commercially available cleaners or antistatic  
spray for vinyl LPs. It may damage the disc.  
Obtaining such permission is the sole responsibility of  
the user.  
This product incorporates copyright protection  
technology that is protected by method claims of certain  
U.S. patents and other intellectual property rights owned  
by Macrovision Corporation and other rights owners.  
Use of this copyright protection technology must be  
authorized by Macrovision Corporation, and is intended  
for home and other limited viewing uses only unless  
otherwise authorized by Macrovision Corporation.  
Reverse engineering or disassembly is prohibited.  
On storing discs  
Do not store discs in a place subject to direct sunlight  
or near heat sources.  
Do not store discs in places subject to moisture and  
dust such as a bathroom or near a humidifier.  
Store discs vertically in a case. Stacking or placing  
objects on discs outside of their case may cause  
warping.  
6
5E80301A E (06-11)  
6
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Before using your unit  
IMPORTANT SAFEGUARDS .............................................. 3  
Notes on discs...................................................................... 6  
Contents............................................................................... 7  
Parts and functions .............................................................. 8  
Remote control..................................................................... 9  
Power source ..................................................................... 10  
Antenna connections.......................................................... 11  
Cable TV connections ........................................................ 12  
TV operation  
Setting the language .......................................................... 13  
TV operation....................................................................... 14  
Closed caption ................................................................... 16  
To memorize channels ....................................................... 17  
Setting the V-Chip .............................................................. 19  
Picture control adjustment.................................................. 22  
Stereo and separate audio program (SAP) ........................ 23  
Playback operation  
Disc .................................................................................... 24  
Preparation/Status display of disc ...................................... 25  
Playback procedure ........................................................... 26  
Special playback ................................................................ 27  
Advanced Function  
Zooming/Locating desired scene ....................................... 28  
Repeat/Random/Program playback and Repeat A-B......... 29  
Marking desired scenes ......................... ........................... 30  
Changing soundtrack language/Subtitles .......................... 31  
Changing angles/Title selection/DVD menu....................... 32  
Additional Information  
Setting language ................................................................ 33  
Setting the aspect ratio of TV screen/Setting on screen  
display ................................................................................ 34  
Dynamic Range Control ..................................................... 35  
Parental control setting ..................................................... 36  
To change the parental level .............................................. 37  
Temporary disabling of rating level by DVD disc ................ 38  
Language code list ............................................................. 39  
Connections to other equipments ...................................... 40  
Problems and troubleshooting ............................................. 42  
Reception disturbances...................................................... 44  
Specifications ..................................................................... 45  
7
5E80301A E (06-11)  
7
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and functions  
Front  
VOLUME UP/DOWN buttons  
AUDIO (L/R)/VIDEO IN jacks (LINE)  
SKIP buttons  
Disc tray  
OPEN/CLOSE button  
Remote sensor  
Power indicator  
Headphone jack  
STOP button  
PLAY button  
POWER button  
CHANNEL UP/DOWN buttons  
Rear  
VIDEO OUT jack  
AUDIO OUT (L/R) jacks  
COAXIAL DIGITAL AUDIO OUT jack  
RF IN jack  
AC power cord  
8
5E80301A E (06-11)  
8
22/01/2003, 22:03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Page  
POWER  
Power On/Off  
13,14,25  
DISPLAY/CALL  
Call TV information  
Call DVD information  
15  
25  
TV/DVD  
OPEN/CLOSE  
0-9  
Switch between TV/AV and DVD  
Open or Close the tray  
25  
26,38  
Direct channel selection of TV  
Input setting  
14,18  
28,29  
Enter a password  
19,21,36~38  
VOLUME +/–  
Adjust volume of TV  
14  
CH  
/
Select channel of TV  
Cursor buttons  
15  
13,17~22  
26,28,32~37  
SELECT/ENTER  
Enter information in the menu 13,19,21,26  
28,29,32~38  
Cursor buttons  
13,17~22  
26,28,32  
MUTE  
Switch off the sound  
15  
32  
DVD MENU  
RETURN  
Display DVD menu  
Remove DVD set up menu  
33~38  
SETUP/TV MENU  
TV mode - Display menu of TV  
13,17~22  
DVD mode - Call up initial setup mode 33~37  
AUDIO  
Switch the sound of TV  
Change sound track language  
23  
31  
ANGLE  
Change playback angle  
Set Subtitle  
32  
31  
SUB TITLE  
CANCEL  
Reset information in the menu 19,22,28,36  
TOP MENU  
ZOOM/QUICK VIEW  
Select title  
32  
Switch between present/last channel  
Zoom  
15  
28  
INPUT SELECT  
SLEEP  
Switch between TV/AV  
Sleep timer  
41  
15  
27  
27  
SLOW  
Forward/Reverse- slow motion  
PAUSE/STILL  
Pause CD sound  
Still picture of DVD  
PLAY MODE  
SEARCH  
PLAY  
Select playback mode  
29  
27  
Fast Forward/Review playback  
Playback  
26,27,29,32,38  
SKIP  
Skip chapter to forward or reverse  
direction  
27  
STOP  
Stop  
26  
30  
28  
16  
MAKER  
JUMP  
Index  
Locating desired scene  
TV/CAP/TEXT  
Switch between TV/Caption/Text in  
Closed Caption mode  
REPEAT A-B  
Repeat playback between A and B  
29  
9
5E80301A E (06-11)  
9
22/01/2003, 22:03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Inserting Batteries  
Open the battery compart-  
ment cover in the direction of  
the arrow.  
Install two "AAA" batteries (not  
supplied), paying attention to  
the polarity diagram in the  
battery compartment.  
Replace the compartment  
cover.  
1
2
3
Operation  
• Aim the remote control at the remote sensor and  
press control buttons to operate.  
• Operate the remote control within 30° angle on  
either side of the remote sensor, up to a dis-  
tance of Approx. 5 meters.  
Approx. 5 meters  
The precautions below should be followed when using batteries in this device:  
1. Use only the size and type of batteries specified.  
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment.  
Reversed batteries may cause damage to the device.  
3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from  
possible battery leakage.  
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture (Follow battery  
manufacturer’s directions).  
Power source  
TO USE AC POWER SOURCE  
Use the AC polarized line cord provided for operation on AC. Insert  
AC Outlet  
the AC cord plug into a standard 120V 60Hz polarized AC outlet.  
Wider Hole  
and Blade  
NOTES:  
Never connect the AC line cord plug to other than the specified  
voltage (120V 60Hz). Use the attached power cord only.  
If the polarized AC cord does not fit into a non-polarized AC  
outlet, do not attempt to file or cut the blade. It is the user’s  
responsibility to have an electrician replace the obsolete outlet.  
If you cause a static discharge when touching the unit and the  
unit fails to function, simply unplug the unit from the AC outlet  
and plug it back in. The unit should return to normal operation.  
If the AC cord plug is plugged in for the first time, wait for about  
5 seconds before pressing the POWER button.  
Polarized AC Cord Plug  
(One blade is wider than the other.)  
10  
5E80301A E (06-11)  
10  
22/01/2003, 21:40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna connections  
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna  
system. If you are using a cable TV service (CATV), see page 12 for Cable TV connections.  
Combination VHF/UHF Antenna (Single 75 ohm Cable or 300 ohm Twin-lead Wire)  
Connect the 75 ohm Cable from the Combination  
VHF/UHF Antenna to the Antenna Jack.  
Antenna  
Jack  
Antenna  
Jack  
If your Combination VHF/UHF Antenna has a 300  
ohm Twin-lead Wire, the use of the 300-75 ohm  
Matching Transformer may be necessary.  
75 ohm  
Coaxial  
Cable  
300-75 ohm  
Matching  
Transformer  
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm Twin-lead Wires)  
Connect the UHF 300 ohm Twin-lead Wire to the  
Combiner (not supplied). Connect the VHF 300  
300-75 ohm  
Matching  
Transformer  
Antenna  
Jack  
ohm Twin-lead Wire to the 300-75 ohm Matching  
Transformer. Attach the Transformer to the Com-  
biner, then attach the Combiner to the Antenna  
Jack.  
Combiner  
UHF 300 ohm  
VHF 300 ohm  
Separate VHF/UHF Antennas (75 ohm VHF Cable and 300 ohm UHF Twin-lead Wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
Twin-lead Wire to the Combiner. Attach the Com-  
biner to the Antenna Jack.  
Antenna  
Jack  
VHF 75 ohm  
Combiner  
UHF 300 ohm  
11  
5E80301A E (06-11)  
11  
22/01/2003, 21:41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable TV connections  
This TV/DVD has an extended tuning range and can tune most cable channels without using a Cable  
TV Converter box. Some cable companies offer “premium pay channels” in which the signal is  
scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device  
which is generally provided by the cable company.  
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE  
For basic cable service not requiring a Converter/Descrambler  
Antenna  
box, connect the CATV 75 ohm Coaxial Cable directly to the  
Jack  
Antenna Jack on the back of the TV/DVD.  
75 ohm  
Coaxial Cable  
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE  
If you subscribe to a cable TV service which requires the use of a Converter/Descrambler box, connect the  
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,  
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV/DVD. Follow the  
connections shown below. Set the TV/DVD to the output channel of the Converter/Descrambler box (usually  
channel 3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
CATV Cable  
Antenna  
Jack  
75 ohm Cable to  
TV/DVD  
Converter/  
Descrambler  
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH  
SCRAMBLED PREMIUM CHANNELS  
If you subscribe to a cable TV service in which basic channels are unscrambled and premium channels require the  
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from  
the Cable company or an electronics supply store). Follow the connections shown below. With the switch in the “B”  
position, you can directly tune any nonscrambled channels on your TV/DVD. With the switch in the “A” position, tune  
your TV/DVD to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/  
Descrambler box to tune scrambled channels.  
Converter/  
Descrambler  
Incoming  
75 ohm  
Antenna  
Jack  
75 ohm Cable  
to TV/DVD  
CATV Cable  
A
A/B Switch  
Splitter  
B
12  
5E80301A E (12-17)  
12  
22/01/2003, 21:41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
You can choose from three different languages (English, French and Spanish) for the on-screen displays.  
Adjustment menus and messages will appear in the language of your choice.  
On-screen language selection (step 5) will automatically appear on the screen when you press the MENU  
button initially. Select the language you prefer first, then proceed with the other menu options.  
To turn on the TV/DVD, press POWER. The Power indicator  
will light.  
1
Press TV MENU in the TV mode.  
The TV menu screen will appear.  
2
Press  
menu appears.  
or  
until the OPTION  
3
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Press  
or  
to select the  
4
5
6
“LANGUAGE” option, then press  
or  
button.  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
<
Press  
or  
to select the  
desired language: English  
(ENGLISH), Spanish  
(ESPAÑOL) or French  
(FRANCAIS), then press  
ENTER.  
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/
/ ENTER / MENU  
<
<
Press TV MENU until the MENU  
screen is cleared.  
NOTE:  
If the unit does not operate properly,  
or No key operation (by the unit and/  
or the remote control): Static electricity,  
etc., may affect the player's operation.  
Disconnect the AC power cord once, then  
connect it again.  
TheTV section has its own menu and also  
DVD section has its own menu (see page  
33).  
13  
5E80301A E (12-17)  
13  
22/01/2003, 22:04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
To turn on the TV/DVD, press  
POWER.  
1
2
Adjust the volume level by  
pressing VOLUME + or –. The  
volume level will be indicated on  
the screen by green bars. As the  
volume level increases, so do  
the number of bars. If the volume  
decreases, the number of green  
bars also decreases.  
VOLUME  
32  
Set the TV/CATV menu  
option to the appropriate  
position. (See page 17.)  
3
4
TV  
- VHF/UHF channels  
CATV - CABLE TV channels  
Press the Direct Channel selection  
buttons to select the channel.  
CH 012  
TV Mode Direct Channel Selection  
When the TV/CATV menu option is  
in the TV position, all channels can  
be instantly selected by using two  
buttons. (for example, to select  
channel 2, press “0”, then “2”. If  
you press only “2”, channel  
selection will be delayed for a few  
seconds.) For channels 10 and  
above, press the 2 digits in order.  
CATV Mode Direct Channel Selection  
When the TV/CATV menu option is in the CATV position, channels  
can be selected as follows:  
TO SELECT CATV CHANNELS:  
1-9:  
Press “0” twice, then 1-9 as needed. Example, to select  
channel 2, press "002".  
10-12:  
13-99:  
Press “0”, then the remaining 2 digits. Example, to  
select channel 12, press "012".  
Press the 2 digits in order. Example, to select channel  
36, press "36".  
100-125: Press the 3 digits in order. Example, to select channel  
120, press "120".  
NOTE FOR CHANNELS 1-12:  
If only 1 or 2 buttons are pressed, the corresponding channel  
will be selected in 2 seconds.  
CATV  
TV  
VHF  
2-13  
VHF  
2-13  
UHF  
14-69  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
(AA) (WW)  
60-85  
(AAA) (ZZZ)  
86-94  
(86) (94)  
95-99  
(A-5) (A-1)  
100-125  
(100) (125)  
01  
NOTES:  
If a channel with no broadcast is  
selected, the sound will automati-  
cally be muted.  
If a station being viewed stops  
broadcasting, the TV will automati-  
cally shut itself off after 15 minutes.  
(5A)  
14  
5E80301A E (12-17)  
14  
22/01/2003, 22:04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
CHANNEL UP/DOWN  
Press and release CH or . The  
channel automatically stops at the  
next channel set into memory.  
For proper operation, before select-  
ing channels, they should be set into  
the memory. See pages 17 and 18  
To memorize channels”  
CALL  
STEREO SAP  
CH 012  
Press DISPLAY/CALL to display the  
current informations on the screen.  
Press DISPLAY/CALL again to clear  
the call display.  
SEL. MONO+SAP  
• Channel number or VIDEO mode  
• Stereo or SAP (second audio  
program) audio status  
• Audio output status  
QUICK VIEW  
This button allows you to go back to  
the last channel selected by pressing  
QUICK VIEW. Press QUICK VIEW  
again to return to the last channel  
you were watching.  
MUTE  
MUTE  
Press MUTE to switch off the sound.  
The TV/DVD’s sound will be silenced  
and “MUTE” will briefly appear on the  
screen. The sound can be switched  
back on by pressing this button  
again or one of the VOLUME + or –  
buttons.  
SLEEP  
SLEEP  
120  
To set the TV/DVD to turn off after a  
preset amount of time, press SLEEP  
on the remote control. The clock will  
count down 10 minutes for each press  
of SLEEP (120, 110, ...10, 0). After the  
sleep time is programmed, the display  
will appear briefly every ten minutes  
to remind you that the sleep timer is  
operating. To confirm the sleep timer  
setting, press SLEEP and the remain-  
ing time will be displayed for a few sec-  
onds.To cancel the sleep timer, press  
SLEEP repeatedly until the display  
turns to 0.  
15  
5E80301A E (12-17)  
15  
22/01/2003, 22:04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed caption  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning  
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.  
Captions: This Closed Caption Mode will display text on the  
screen in English or another language (depending on the set-  
ting of the Closed Captions CH 1/2).  
Generally, Closed Captions in English are transmitted on Cap-  
tions Channel 1 and Closed Captions in other languages are  
transmitted on Captions Channel 2.  
Text: The Text Closed Caption Mode will usually fill the screen  
with a programming schedule or other information.  
After selecting a Closed Caption Mode, it will stay in effect until it  
is changed, even if the channel is changed.  
If the Captions signal is lost due to a commercial or a break in  
the signal, the Captions will reappear when the signal is received  
again. If the channels are changed, the Captions will be delayed  
approximately 10 seconds. The Captions will appear in places  
on the screen where they will least interfere with the picture,  
usually on the bottom of the screen. News programs will usually  
show three-line Closed Captions which scroll onto the screen.  
Most other shows provide two or three lined Captions placed  
near the character who is speaking so the viewer can follow the  
dialogue. Words in italics or underlined describe titles, words in  
foreign languages or words requiring emphasis. Words that are  
sung usually appear enclosed by musical notes.  
For television programs broadcasting with Closed Captions, look  
in your TV guide for the Closed Captions symbol (CC).  
TO VIEW CLOSED CAPTIONS  
Press TV/CAP/TEXT to switch  
between normal TV and the two  
closed caption modes (captions  
and full screen text). Closed  
captioning will display text on the  
screen for hearing impaired  
viewers.  
NOTES:  
• When selecting Closed Captions, the captioning will be delayed approximately 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with  
Closed Captioning, especially with live programs. This is because during live programs, captions are also  
entered live. These transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may not be seen or may  
interfere with Closed Captions.  
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or  
may appear with strange characters or misspelled words. In this case, adjust the antenna for better reception  
or use an outdoor antenna.  
16  
5E80301A E (12-17)  
16  
22/01/2003, 22:04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
This TV/DVD is equipped with a channel memory feature which allows channels to skip up or down to the next  
channel set into memory, skipping over unwanted channels. Before selecting channels, they must be pro-  
grammed into the TV/DVD’s memory. In addition to normal VHF and UHF channels, this TV/DVD can receive up  
to 113 Cable TV channels. To use this TV/DVD with an antenna, set the TV/CATV menu option to the TV mode.  
When shipped from the factory, this menu option is in the CATV mode.  
TV/CATV SELECTION  
Press TV MENU in the TV mode.  
The TV menu screen will appear.  
1
Press  
menu appears.  
or  
until the SET UP  
2
3
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Press  
CATV”.  
or  
to select the “TV/  
TV/CATV  
ADD/DELETE  
CATV  
ADD  
AUTO CH MEMORY  
/
/
/
/MENU  
<
<
>
Press  
or CATV mode.  
or  
to select the TV  
4
5
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
TV  
ADD  
TV - VHF/UHF channels  
CATV - CABLE TV channels  
/
/
/
/MENU  
>
Press TV MENU until the MENU  
screen is cleared.  
CATV CHART  
The chart below is typical of many cable system channel allocations.  
17  
5E80301A E (12-17)  
17  
22/01/2003, 22:04  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To memorize channels  
AUTOMATIC MEMORY TUNING  
Press TV MENU in the TV mode. The TV menu  
screen will appear.  
1
2
Press  
appears.  
or  
until SET UP menu  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Press  
or  
to select the “AUTO  
3
CH MEMORY”, then press  
or  
.
The TV will begin memorizing all the  
channels available in your area.  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Press TV MENU until the MENU  
screen is cleared.  
4
TO ADD/DELETE CHANNELS  
Select the desired channel to be  
memorized or deleted using Direct  
1
Channel Selection (0-9), or CH or  
.
Press TV MENU. The TV  
menu screen will appear.  
2
3
Press  
or  
until SET UP menu  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
appears.  
/
/
/
/MENU  
<
>
Press  
DELETE”.  
or  
to select the “ADD/  
4
5
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Press  
or  
to select “ADD” or  
“DELETE”, whichever function you  
want to perform.  
TV/CATV  
CATV  
ADD/DELETE  
DELETE  
AUTO CH MEMORY  
/
/
/
/MENU  
<
>
Press TV MENU until the MENU  
screen is cleared.  
6
7
Repeat steps 1-6 for other channels  
you want to add or delete.  
18  
5E80301A E (18-23)  
18  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
An age limitation can be set to forbid children to watch programs according to "TV RATING" and  
"MOVIE RATING".To use the V-Chip function, you must register a password.  
TO REGISTER PASSWORD  
Press TV MENU in the TV mode. The TV menu  
screen will appear.  
1
Press  
menu appears.  
or  
until the OPTION  
2
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
<
>
3
Press  
or  
to select the “V-  
or  
CHIP SET”, then press  
.
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
>
Enter the password (4 digits)  
4
5
using Direct Channel Selection  
(0-9), then press ENTER.  
• If you put a wrong number,  
press CANCEL.  
V-CHIP SET  
NEW  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
"
" appears instead of the number.  
Enter the same password again  
for the safety, then press ENTER.  
Now the password was registered  
and V-Chip setting menu will  
appear on the display.  
V-CHIP SET  
CONFIRM  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
NOTES:  
If you forget the password, you can-  
not set the V-Chip.  
To avoid forgetting the password, write  
it down and keep in the safe place.  
19  
5E80301A E (18-23)  
19  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
TO SET THE V-CHIP  
In the V-CHIP SET menu, press  
1
or  
to select the “TV  
RATING”.  
Press  
desired setting.  
OFF  
TV-Y  
or  
to display the  
2
:
:
TV RATING is not set  
All children  
TV-Y7 :  
TV-G :  
TV-PG:  
TV-14 :  
TV-MA:  
7 years old and above  
General Audience  
Parental guidance  
14 years old and above  
17 years old and above  
When you select TV- Y7, TV-PG, TV-14 or TV-MA, press  
DISPLAY/CALL to show the contained rating. Press  
/
or  
/
to select the desired item you want.  
Press  
“MOVIE RATING”.  
or to select the  
3
4
Press  
rating.  
or  
to select desired  
OFF  
G
PG  
:
:
:
MOVIE RATING is not set  
All ages  
Parental guidance  
PG-13 : Parental guidance  
less than 13 years old  
Under 17 years old  
R
:
Parental guidance suggested  
NC-17 : 17 years old and above  
X
:
Adult only  
Press  
CHIP”.  
or  
to select “V-  
5
6
7
To use after the TV is protected  
When the program applied to the V-  
Chip setting is received, enter the  
password. Protection can be can-  
celled.  
Press  
or  
to Display “ON”.  
Now your settings were set into  
the memory.  
NOTE:  
The V-Chip function is activated only  
on programs and tapes that have the  
rating signal.  
Press TV MENU until the MENU  
screen is cleared.  
20  
5E80301A E (18-23)  
20  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
TO CHANGE PASSWORD  
Press TV MENU in the TV mode. The TV  
menu screen will appear.  
1
2
Press  
or  
until OPTION  
menu appears.  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Press  
CHIP SET”, then press  
or  
to select the “V-  
3
or  
.
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Enter the Password using Direct  
Channel Selection (0-9), then  
press ENTER.  
• If you put a wrong number,  
press CANCEL.  
4
5
6
V-CHIP SET  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
Press  
“CHANGE PASSWORD”, then  
press or  
or  
to select  
.
Enter the new password using  
Direct Channel Selection (0-9),  
then press ENTER.  
Enter the same password again  
for safety, then press ENTER.  
7
8
Press TV MENU repeatedly to  
return to normal screen.  
21  
5E80301A E (18-23)  
21  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture control adjustment  
Picture controls are factory preset but you can adjust them individually as follows:  
Press TV MENU in the TV mode. The TV menu  
screen will appear.  
1
Press  
or  
until PICTURE  
2 menu appears.  
BRIGHTNESS  
CONTRAST  
COLOR  
0
+32  
0
TINT  
0
SHARPNESS  
0
/
/
/
/MENU  
<
<
>
Press  
you want to adjust.  
or  
to select the item  
3
4
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
0
+32  
0
0
0
/
/
/
/CANCEL/MENU  
>
Press  
setting.  
or  
to adjust the  
increase brightness  
decrease brightness  
decrease contrast  
be pale color  
BRIGHTNESS  
CONTRAST  
COLOR  
increase contrast  
be brilliant color  
be reddish color  
be greenish color  
makes picture softer  
TINT  
makes picture clearer  
SHARPNESS  
After your desired setting press  
TV MENU until the MENU  
screen is cleared.  
5
CANCEL  
Pressing CANCEL while making picture adjustments will return all  
adjustments to the factory preset levels.  
NOTE:  
The CONTRAST default setting is set  
to maximum at the factory.  
22  
5E80301A E (18-23)  
22  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Stereo and separate audio program (SAP)  
The TV/DVD is equipped with a feature known as Multi-channel TV Sound or MTS. MTS broadcasts greatly  
enhance TV viewing by bringing you programs with high fidelity stereo sound.  
MTS also provides an extra channel called the Separate Audio Program or SAP which broadcasters can use to  
transmit a second language for bilingual transmission or for other purposes.  
LISTENING TO STEREO SOUND  
When the TV is turned on or a  
channel selection is made, make  
STEREO  
CH 013  
certain the STEREO appears on  
the screen. This means that  
"Stereo" broadcasting is avail-  
able. You can enjoy stereo  
sound from the left and right  
speakers.  
When "Mono" broadcasting is  
received, no indication is  
displayed.  
If the broadcast signal is not  
strong enough or clear stereo  
sound is not available, press  
AUDIO to change to mono  
sound. The noise should be  
eliminated. Press it again to  
return to the stereo sound.  
LISTENING TO SAP (SEPARATE AUDIO PROGRAM)  
When the TV is turned on or a  
channel selection is made, make  
STEREO SAP  
CH 013  
certain the SAP appears on the  
screen. This means that the  
"Separate Audio Program"  
broadcasting is available.  
TO SELECT DESIRED SOUND  
Press AUDIO to select the  
desired sound.  
SEL. STEREO  
MONO+SAP BROADCASTING  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MONO)  
SAP SOUND  
STEREO+SAP BROADCASTING  
STEREO SOUND  
(MAIN)  
SAP SOUND  
MONO SOUND  
(MAIN)  
MONO + SAP SOUND  
(MAIN)  
23  
5E80301A E (18-23)  
23  
22/01/2003, 22:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disc  
About this owner’s manual  
Playable discs  
This owner’s manual explains the basic instructions of  
this TV/DVD. Some DVD video discs are produced in a  
manner that allows specific or limited operation during  
playback. As such, the TV/DVD may not respond to all  
operating commands. This is not a defect in the TV/DVD.  
Refer to instruction notes of discs.  
This TV/DVD can play the following discs.  
Maximum  
Disc  
Disc Mark  
Contents  
playback time  
Size  
Approx. 4 hours  
(single sided disc)  
12 cm  
” may appear on the TV screen during operation.  
Audio  
+
video  
(moving  
pictures)  
Approx. 8 hours  
(double sided disc)  
A “ ” means that the operation is not permitted by the  
TV/DVD or the disc at the moment.  
For example, it is unable to skip the playback of  
copyright message of the disc when the SKIP(  
button is pressed. Alternatively, the “ ” may also  
DVD  
video  
discs  
Approx. 80 minutes  
(single sided disc)  
)
8 cm  
Approx. 160 minutes  
(double sided disc)  
indicate that the feature is not available for the disc.  
Notes on region numbers  
Approx. 74 minutes  
Approx. 20 minutes  
12 cm  
Audio  
CDs  
Audio  
The region number of this TV/DVD is 1. If region  
numbers, which stand for their playable area, are printed  
on your DVD video disc and you do not find  
8 cm  
(CD  
single)  
ALL  
1
or  
,
disc playback will not be allowed by the player. (In this  
case, the TV/DVD will display a message on-screen.)  
The following discs are also available.  
CD-R  
CD-RW  
CD-R/RW discs recorded by CD-DA method can be  
played. Some CD-R/RW discs may be incompatible.  
You cannot play discs other than those listed above.  
You cannot play discs of VIDEO-CD, DVD-RAM, DVD-RW,  
etc., or non standardized discs even if they may be labeled  
as above.  
• ThisTV/DVD uses the NTSC color system, and cannot play  
DVD video discs recorded in any other color system (PAL,  
SECAM, etc.).  
24  
5E80301A E (24-31)  
24  
22/01/2003, 21:45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation/Status display of disc  
The following pages describe the  
setup/operation in DVD mode.  
Preparation  
Before DVD/CD operation, please make preparations as follows.  
Insert the AC cord plug into a standard 120V 60Hz polarized  
AC outlet.  
• If the AC cord plug is plugged in for the first time, wait for  
about 5 seconds before pressing POWER.  
1
NOTE: When connecting to other equipment, unplug the unit  
from the AC outlet.  
Press POWER on the unit or on the remote control to turn on  
2
the unit. The POWER indicator will light.  
• Every time you press POWER, the TV/DVD starts from TV  
mode.  
• When using an amplifier, switch on the amplifier.  
Press TV/DVD to select DVD  
mode.  
The DVD startup screen will ap-  
pear on the screen.  
3
Status display of disc  
Press DISPLAY/CALL.The status display of the disc will appear  
on the screen.  
DVD  
Title number  
Title elapsed playing time  
Chapter number Title total time  
Disc operation  
1/8  
C
1/19  
T
0:07:18 2:02:31  
1/8 Eng 1/1  
Camera angle  
1/8 Eng DolbyDigital  
Subtitle language  
Audio language  
A kind of audio  
To make status display disappear, press DISPLAY/CALL again.  
Audio CD  
Track elapsed playing time  
NOTE:  
Disc operation  
If the unit does not operate properly:  
Static electricity, etc., may affect the play-  
er's operation. Disconnect the AC power  
cord once, then connect it again.  
Track total time  
Track number  
Play list  
• When you play the CD disc, the status display will appear  
on the screen and continue displaying.  
25  
5E80301A E (24-31)  
25  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback procedure  
Press OPEN/CLOSE on  
the unit or the remote con-  
trol.  
1
The disc tray will open.  
Place a disc onto the tray.  
Position it with the printed  
label side up, align it with  
the guides, and place it in  
its proper position.  
2
3
Press OPEN/CLOSE or  
PLAY.  
The disc tray closes auto-  
matically.  
TheTV-screen,  
changes  
to “ ” and then playback  
commences.  
• A menu screen will  
appear on the TV screen,  
if the disc has a menu  
feature.  
NOTES:  
• If a non-compatible disc is loaded, “Incor-  
rect Disc”, “Region Code Error” or “Paren-  
tal Error” will appear on the TV screen ac-  
cording to the type of loaded disc. If these  
appear, check your disc again (see pages  
24 and 36).  
• Some discs may take a minute or so to  
start playback.  
• When you set a single-faced disc label  
downwards (ie. the wrong way up) and  
press PLAY or OPEN/CLOSE on the unit,  
Press  
/
or  
/
to make a selection.  
4
5
Press SELECT.  
• Title is selected and play commences.  
” will appear on the display for 3 about  
seconds and then “No Disc” will be dis-  
played.  
Press STOP to end playback.  
6
• The unit memorizes the stopped point, depending on the  
disc. “ ” appears on the screen. Press PLAY to resume  
playback (from the scene point).  
• If you press STOP again or unload the disc (“ ” appears  
on the screen.), the unit will clear the stopped point.  
• Some playback operations of DVDs may  
be intentionally fixed by software produc-  
ers. Since this unit plays DVDs according  
to the disc contents the software produc-  
ers designed, some playback features may  
not be available. Also refer to the instruc-  
tions supplied with the DVDs.  
• When playing DTS-encoded Audio CDs,  
excessive noise will be heard from the  
analogue stereo outputs. To avoid possi-  
ble damage to the audio system, the con-  
sumer should take proper precautions  
when the analogue stereo outputs of the  
DVD player are connected to an amplifi-  
cation system.  
To stop the playback, press STOP.  
Then press OPEN/CLOSE.  
The disc tray opens.  
Remove the disc and press OPEN/CLOSE then press  
POWER.  
The disc tray closes automatically and unit turns off.  
7
26  
5E80301A E (24-31)  
26  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special playback  
Note: There may be a slight delay be-  
tween when you press the button and  
the function activating.  
Fast Forward Playback  
Press SEARCH during normal playback.  
Each press of the SEARCH button will increase the speed  
of the search (x 2), (x 4), (x 8), (x 15).  
(CD: (x 2), (x 4), (x 8),  
(x 20))  
• To resume normal playback, press PLAY.  
Review Playback  
Press SEARCH  
during normal playback.  
Each press of the SEARCH  
button will increase the speed  
(x 4), (x 8), (x 15).  
(x 8),  
of the search  
(CD: (x 2),  
(x 2),  
(x 4),  
(x 20))  
• To resume normal playback, press PLAY.  
Still Playback  
Press PAUSE/STILL during  
normalplaybacktopauseplay-  
back.  
To resume normal playback,  
press PLAY.  
Frame Advance  
Press PAUSE/STILL during still playback.  
One frame is advanced each time you press PAUSE/STILL.  
To resume normal playback, press PLAY.  
Slow-motion Playback  
Press SLOW  
(
)
Reverse or SLOW  
(
)
Forward during  
normal playback or still playback.  
Each press of SLOW will change the speed of the slow x1/2,  
x1/4, x1/6, x1/8.  
To resume normal playback, press PLAY.  
To resume the still playback, press PAUSE/STILL.  
NOTE:  
The unit is capable of holding a still video  
image or On screen display image on your  
television screen indefinitely. If you leave  
the still video image or On screen display  
image displayed on your TV for an ex-  
tended period of time, you risk permanent  
damage to your television screen. Pro-  
jection televisions are very susceptible.  
Locating a chapter or track  
Press SKIP(  
) Forward or SKIP(  
) Reverse during  
playback to locate a chapter that you want to watch.  
Each time you press the button, a chapter or track is  
skipped.  
27  
5E80301A E (24-31)  
27  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zooming/Locating desired scene  
Zooming  
This unit will allow you to zoom in on the frame image. You  
can then make selections by switching the position of the  
frame.  
Press TV/DVD to select  
DVD mode.  
Press ZOOM during play-  
back.  
1
1
The center part of the  
image will be zoomed in.  
Each press of ZOOM will  
change the ZOOM  
1
(x 2),  
(x 4).  
2 (x 3) and  
3
Press  
/
/
/
to view a different part of the frame.  
2
3
You may move the frame from the centre position to UP,  
DOWN, LEFT or RIGHT direction.  
In the zoom mode press ZOOM repeatedly to return to a  
1:1 view (  
Off).  
Locating Desired Scene  
Use the title, chapter and time recorded on the disc to  
locate the desired point to play back.  
Press JUMP during play-  
back.  
1
Jump  
C
_ _ / 19  
1 / 8  
2:02:31 / 2:02:31  
T
/Enter/0 9/Cancel/Jump  
Press  
Track)” or “  
or  
to select the “  
(Time)”.  
C
(Chapter)”, “  
T
(Title/  
2
3
Press Number buttons (0–9) to input the number.  
NOTES:  
You can select the Pause, Slow or  
Search playback in the zoom mode.  
• Some discs may not respond to zoom  
feature.  
• If you input a wrong number, press CANCEL.  
• Refer to the package supplied with the disc to check the  
numbers.  
Press ENTER.  
4
• Playback starts.  
• When you change the title, playback starts from  
Chapter 1 of the selected title.  
• Some discs may not work in the above operation.  
28  
5E80301A E (24-31)  
28  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat/Random/Program playback and Repeat A-B  
Press PLAY MODE during playback or stop mode.  
Each time you press PLAY MODE, playback mode changes as follows.  
DVD  
On screen  
display  
Title:  
Audio CD  
On screen  
Operation  
Operation  
Repeats entire disc.  
display  
Repeats the current title.  
All:  
Chapter: Repeats the current chapter.  
Track:  
Repeats the current track.  
Off:  
Resumes normal playback.  
Random Play: Plays the tracks in random order.  
*Program:  
Plays the tracks in program order.  
Resumes normal playback.  
• During stop mode, PLAY MODE key is not effective.  
(Status display)  
:
• During stop mode, you can not select “  
Track”.  
*Program menu  
Program  
Use number buttons (0–9) to  
1
2
3
4
5
8
8:29  
8:54  
7:31  
enter the track’s number you  
want to program, then press  
ENTER. The track number and  
total time are displayed.Repeat  
this step to enter additional  
tracks.When you have finished  
entering tacks, press PLAY to  
start Program playback.  
3
__  
Total 3 0:25:14  
/Enter/0 9/Cancel/Play/PlayMode  
A playlist of your programmed  
tracks is displayed.  
NOTES:  
• If you put a wrong number, press CANCEL.  
To cancel program play, press STOP 3 times.  
To clear the programs on the program menu, press CANCEL until all programs  
will be cleared.  
• The program is cancelled when you open the disc tray or turn off the power.  
A
Repeat A-B  
Repeat A-B playback allows you to repeat material between two selected points.  
Press REPEAT A-B during playback.  
1 The start point is selected.  
A
B
Press REPEAT A-B again.  
2 The end point is selected. Playback starts at the point that you selected.  
Playback stops at the end point, returns to Point A automatically, then starts  
again.  
To resume normal playback press REPEAT A-B again. “  
Off” appears on the screen.  
NOTES:  
• Some discs may not work with the repeat operation.  
• In Repeat A-B mode, subtitles near point A or B may not appear.  
You may not be able to set Repeat A-B, depending on the scenes of the DVD.  
• Repeat A-B does not work with interactive DVDs.  
29  
5E80301A E (24-31)  
29  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marking desired scenes  
The TV/DVD stores the points that you  
want to watch again. You can resume  
playback from that scene.  
Marking the Scenes  
Press MARKER during  
1
T
T
T
C
C
C
playback.  
Select the blank Marker  
2
T
T
T
C
C
C
using  
/
, then press  
ENTER at the desired  
scene.  
• Up to 3 scenes can be  
selected.  
• Repeat this procedure to  
set the other 2 scenes.  
Press MARKER to remove this display.  
3
Returning to the Scenes  
Press MARKER during  
1
playback or stop mode.  
T
T
T
C
C
C
or to select  
the Marker 1-3.  
2 Press  
T
T
T
C
C
C
Press SELECT.  
Playback starts from the marked scene.  
3
NOTES:  
To Cancel the Mark  
The marking is canceled when you open  
the disc tray or turn the power off.  
Some subtitles recorded around the  
marker may fail to appear. [DVD]  
Press MARKER.  
1
Press or to select the Marker 1-3.  
2
Press CANCEL.  
3
30  
5E80301A E (24-31)  
30  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing soundtrack language/Subtitles  
Changing soundtrack language  
You can select the language when you play a multilingual  
disc.  
Press AUDIO during play-  
back.  
1
2/8 Fra Dolby Digital  
The current soundtrack  
language will appear.  
Press AUDIO repeatedly  
until the desired language  
is selected.  
2
1/8 Eng Dolby Digital  
The on-screen display will  
disappear after a few sec-  
onds.  
In case of video CD playback  
Audio type changes as follows each time you press ADUIO.  
LR  
L
R
NOTES:  
• If the desired language is not heard af-  
ter pressing the SUB TITLE button sev-  
eral times, the language is not recorded  
on the disc.  
• Changing soundtrack language is can-  
celled when you open the disc tray.The  
initial default language or available lan-  
guage will be heard if the disc is played  
back again.  
Subtitles  
Turning the Subtitles On and Off  
When playing back a disc recorded with subtitles, you  
can turn the subtitles on or off.  
Press SUBTITLE during play-  
back until “Off” appears.  
Off  
• Changing subtitle language is cancelled  
when you open the disc tray or turn the  
power off.  
• Some functions may not work on some  
DVDs.You may not be able to turn sub-  
titles on or off or change subtitles.While  
playing the DVD, the subtitle may  
change when:  
- you open or close the disc tray  
- you change the title.  
• In some cases, the subtitle language is  
not changed to the selected one imme-  
diately.  
Changing the subtitle language  
You can select the language when playing back a disc  
recorded with multi-lingual subtitles.  
Press SUB TITLE repeat-  
edly during playback until  
your desired language ap-  
pears.  
1
1/32 Eng  
The on-screen display will disappear after a few seconds.  
2
31  
5E80301A E (24-31)  
31  
22/01/2003, 22:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Changing angles/Title selection/DVD menu  
Changing Angles  
When playing back a disc recorded with multi-angle facil-  
ity, you can change the view angle.  
Press ANGLE during play-  
back.  
1
1/9  
The current angle will ap-  
pear.  
Press ANGLE repeatedly until the desired angle is selected.  
2
Title Selection  
Two or more titles are recorded on some discs. If the title  
menu is recorded on the disc, you can select the desired  
title.  
Press TOP MENU during playback.  
Title menu appears on the screen.  
1
Press  
/
or  
/
to select the desired title.  
2
3
Press ENTER or PLAY.  
The playback of the selected title will start.  
DVD Menu  
Some DVDs allow you to select the disc contents using the  
menu.  
When you play back these DVDs, you can select the sub-  
title language and sound-track language,etc. using the  
DVD menu.  
Press DVD MENU during playback.  
The DVD menu appears on the screen.  
1
• Press DVD MENU again to resume playback at the scene  
when you pressed DVD MENU.  
NOTES:  
• Depending on the DVD, you may not be  
able to change the angles even if multi-  
angles are recorded on the DVD.  
• Depending on the DVD, you may not be  
able to select the title.Depending on the  
DVD, a “title menumay simply be called  
a “menuor “titlein the instructions sup-  
plied with the disc.  
Press  
/
or  
/
to select the desired item.  
2
3
Press ENTER.  
The menu continues to another screen. Repeat steps 2  
and 3 to set additional items if any.  
32  
5E80301A E (32-37)  
32  
22/01/2003, 22:36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting language  
You can change the default settings  
to customise performance to your  
preference.  
Press TV/DVD to select  
1
2
3
Main Menu  
DVD mode.  
Language  
Press SETUP in the stop  
mode.  
to select  
“Language”, then press  
Picture  
Sound  
Press  
or  
Parental  
or ENTER.  
/Enter/Setup/Return  
Press  
or  
to select  
“OSD Language”, then  
press  
or ENTER.  
Press  
or  
to select de-  
OSD Language  
sired language (e.g. Eng-  
lish), then press ENTER.  
The menu returns to “Lan-  
guagemenu automatically.  
English  
Francais  
Espanol  
/Enter/Setup/Return  
• If you want to return to the  
previous menu, press  
or RETURN.  
Repeat steps 2-3 for other “Language” setting.  
4
5
Other Selection: (Menu/Audio/Subtitle)  
If you want to select another language, enter the language  
code (see the Language code list on page 39).  
Off: (subtitle)  
Subtitles do not appear.  
Press SETUP to remove the Menu screen.  
NOTES:  
• If the selected soundtrack language is  
not recorded on the disc, the original  
language will be heard.  
• If the selected subtitle language is not  
recorded on the disc, the first-priority  
language is selected.  
33  
5E80301A E (32-37)  
33  
22/01/2003, 22:37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the aspect ratio of TV screen/Setting on screen display  
Setting the aspect ratio of TV screen  
You can select the aspect ratio for your TV.  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode or No Disc.  
Main Menu  
1
Language  
Picture  
Sound  
Press  
or  
to select  
Parental  
“Picture”, then press  
or  
/Enter/Setup/Return  
ENTER.  
Press  
“TV Screen”, then press  
or ENTER.  
or  
to select  
2
3
Press  
or  
to select  
TV Screen  
your desired screen type,  
then press ENTER.  
16:9  
4:3  
4:3  
You have the following screen sizes to choose from:  
16:9 Wide screen  
Select this mode when connecting to a wide-screen TV.  
A wide screen picture is displayed full size.  
4:3  
Letterbox  
Select this mode when connecting to a conventional TV.  
When playing back a wide screen-DVD disc, it displays the  
wide picture with black bands at the top and bottom of  
screen.  
4:3  
Panscan  
It displays the wide picture on the whole screen with left  
and right edges automatically cut off.  
• If you want to return to the previous menu, press  
or  
RETURN.  
Press SETUP to remove the Menu screen.  
4
Status on screen display  
On screen display can be switched on or off when you  
press the buttons.  
Press SETUP in the stop mode or No Disc.  
1
Press  
or  
to select “Picture”, then press  
or ENTER.  
Picture  
Press  
“Display”.  
or  
to select  
2
TV Screen  
Display  
16:9  
On  
NOTE:  
If the DVD disc is not formatted in the pan  
& scan style, it displays 4:3 style.  
Press  
select “On” or “Off”.  
or ENTER to  
Picture  
3
TV Screen  
Display  
16:9  
Off  
On: On screen displays appear when you press the  
buttons (factory setting).  
Off: On screen displays do not appear when you press  
or any buttons.  
• If you want to return to the previous menu, press  
or  
RETURN.  
34  
Press SETUP to remove the Menu screen.  
4
5E80301A E (32-37)  
34  
22/01/2003, 22:37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dynamic Range Control  
DRC (Dynamic Range Control) ena-  
bles you to control the dynamic range  
so as to achieve a suitable sound for  
your equipment.  
Press TV/DVD to select  
DVD mode.  
Main Menu  
1
Language  
Press SETUP in the stop  
mode.  
Picture  
Sound  
Press  
or  
to select  
Parental  
“Sound”.  
/Enter/Setup/Return  
Press  
lect “DRC”.  
or ENTER to se-  
Sound  
DRC  
2
3
On  
/Enter/Setup/Return  
Press  
lect “On” or “Off”.  
or ENTER to se-  
Sound  
DRC  
Off  
/Enter/Setup/Return  
• If you want to return to the previous menu, press  
or  
RETURN.  
Press SETUP to remove the Menu screen.  
4
NOTES:  
• This function works only during play-  
back of Dolby Digital recorded discs.  
• The level of Dynamic Range Reduction  
may differ depending on DVD video  
disc.  
35  
5E80301A E (32-37)  
35  
22/01/2003, 22:37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental control setting  
Some discs are specified not suitable  
for children. Such discs can be limited  
not to play back with the unit.  
Press TV/DVD to select  
DVD mode.  
Press SETUP in the stop  
mode.  
1
Main Menu  
Language  
Picture  
Sound  
Press  
or  
to select  
Parental  
“Parental”, then press  
or  
ENTER.  
/Enter/Setup/Return  
Press  
or  
to select  
Parental  
2
3
“Parental Level”, then press  
Password  
Parental Level  
Off  
Off  
or ENTER.  
Press  
or  
to select a  
Parental Level  
level from Off or 1–8. Press  
or ENTER to set the se-  
lected level.  
Off  
1
2
3
4
5
/Enter/Setup/Return  
• Level Off: The parental control setting does not func-  
tion.  
• Level 8:  
• Level 1:  
Almost all DVD software can be played back.  
DVD software for adults cannot be played  
back.  
Select from the level 1 to level 8. The limitation will be  
more severe as the level number is lower.  
Press  
“Password”, then press  
or ENTER.  
or  
to select  
4
5
6
Parental  
Password  
Parental Level  
Off  
1
Press number buttons (0–  
9) for the password.  
Don’t forget the password.  
• If you input a wrong  
number, press CANCEL.  
Password  
Password  
1234  
NOTES:  
Press ENTER to store the  
password.  
Note: Now the rating is  
locked and the setting can-  
not be changed unless you  
enter the correct password.  
Parental  
If each setup (P.33–37) has been  
completed, the unit can always be  
worked under the same conditions  
(especially with DVD discs).  
Password  
Parental Level  
On  
1
Each setup will be retained in the  
memory when you turn the power off.  
• Depending on the discs, the unit can-  
not limit playback.  
• Some discs may not be encoded with  
specific rating level information though  
its disc jacket says “adult.” For those  
discs, the age restriction will not work.  
• If you want to return to the previous menu, press  
or RETURN.  
Press SETUP to remove the parental control screen.  
7
36  
5E80301A E (32-37)  
36  
22/01/2003, 22:37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To change the parental level  
Press TV/DVD to select DVD mode.  
Press SETUP in the stop mode or No Disc.  
1
Press  
or  
to select “Parental”, then press  
or  
ENTER.  
Press  
“Password”, then press  
or ENTER.  
or  
to select  
2
3
Parental  
Password  
Parental Level  
On  
1
Press number buttons (0–  
9) to enter the password  
you have stored.  
Password  
Password  
____  
• If you input a wrong number, press CANCEL.  
Press ENTER.  
The password is now Off.  
Parental  
4
5
Password  
Parental Level  
Off  
1
Press  
“Parental Level”. Then  
press or ENTER. The  
or  
to select  
Parental  
Password  
Parental Level  
Off  
1
Parental Level screen is dis-  
played.  
Press  
or  
to select a  
6
level from Off or 1–8 and  
then press  
or ENTER.  
Press  
or  
to select  
Parental  
7
8
“Password” and then press  
Password  
Parental Level  
Off  
8
or ENTER.  
Press number buttons (0–  
9) to enter a 4-digit pass-  
word.  
Password  
Password  
1234  
NOTE:  
Do not forget the password. If you forget  
the password, contact the dealer that you  
purchased the unit from.  
Note: You can enter a new password.  
Press ENTER.  
The parental level is now  
changed and locked.  
Parental  
9
Password  
Parental Level  
On  
8
• If you want to return to the previous menu, press  
or  
RETURN.  
Press SETUP to remove the parental control screen.  
10  
37  
5E80301A E (32-37)  
37  
22/01/2003, 22:37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Temporary disabling of rating level by DVD disc  
Depending on the DVD disc, the disc  
Load a DVD disc and press  
1
may try to temporarily cancel the  
PLAY (see page 26).  
rating level that you have set.  
It is up to you to decide whether to  
cancel the rating level or not.  
If the DVD disc has been designed to temporarily cancel  
2
the Rating level, the screen which appears after inserting  
a DVD will change, depending on which disc is played. If  
you select “YES” with the ENTER key, “Your disc exceeds  
the parental control level.screen will then appear.  
Your disc exceeds the parental control level.  
Password  
____  
Enter/0–9/Cancel/Return  
If you wish to cancel the set rating level temporarily, enter  
the 4-digit password.  
Then press ENTER.  
3
Alternatively, if the password has not been set, playback  
will commence. If you don’t know (or have forgotten) the  
password, select “STOP”.  
The setting screen will disappear. Press OPEN/CLOSE to  
remove the disc.  
To quit entering, press RETURN.  
Playback will commence if the entered password was cor-  
rect.  
4
NOTE:  
This temporary cancellation of rating level  
will be kept until the disc is ejected.  
When the disc is ejected, the original rating  
level will be set again automatically.  
38  
5E80301A E (38-41)  
38  
22/01/2003, 22:50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Language code list  
Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or "MENU LANGUAGE"  
(see page 33).  
Language Name Code Language Name Code Language Name Code Language Name Code  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese 2919  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2921  
2922  
2925  
1529  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
2322 Sundanese 2931  
Armenian  
Assamese  
Aymara  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
Azerbaijani  
Bashkir  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
2629 Tonga  
1611 Turkish  
2622 Turkmen  
2630 Twi  
Breton  
1929 Panjabi  
1924 Pashto, Pushto  
1911 Persian  
1711 Polish  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese 3219  
2923 Volapük  
2911 Welsh  
1714 Wolof  
2928 Xhosa  
2918 Yiddish  
2924 Yoruba  
2914 Zulu  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian  
2211 Shona  
1625 Latvian, Lettish 2232 Sindhi  
39  
5E80301A E (38-41)  
39  
22/01/2003, 21:47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipments  
The exact arrangement you use to interconnect various video and audio components to the TV/DVD is depend-  
ent on the model and features of each component. Check the Owner's Manual provided with each component  
for the location of video and audio inputs and outputs.  
Using an Audio Amplifier  
Rear of TV/DVD  
Amplifier  
To Audio (R) Input  
To Audio (L) Input  
Audio (L) Output  
Audio (R) Output  
AUDIO cord (not supplied)  
Using an AV Amplifier with built-in digital surround  
If you are using an Amplifier with a built-in digital surround as follows, you can enjoy the various audio systems  
including Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, DTS decoder, MPEG decoder or etc as  
shown below.  
Front  
Speaker  
(Right)  
Subwoofer  
Rear of TV/DVD  
TV/DVD  
Front  
Speaker  
(Left)  
Coaxial Digital  
Audio Output  
Center Speaker  
Coaxial digital cable (not supplied)  
To Coaxial Digital Audio Input  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital surround  
decoder as listed above  
*
*
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby  
Laboratories. Confidential unpublished works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.  
NOTES:  
When you make the connections above, do not set DOLBY DIGITAL to DOLBY DIGITAL, MPEG to MPEG to ON on the AV  
Amplifier. If you do, a loud noise will suddenly come out from the speakers, affecting your ears or causing the speakers to be  
damaged.  
When playing DTS-encoded CDs, only noise will be heard from the speakers or analogue stereo outputs.  
Some DTS decoders which do not support DVD-DTS interface may not work properly with the unit.  
40  
5E80301A E (38-41)  
40  
22/01/2003, 21:47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipments  
Using the audio/video inputs  
If you connect the TV/DVD to VCR, camcorder or TV game, you can select by pressing INPUT SELECT.  
NOTE:  
Press INPUT SELECT repeatedly to select the desired mode.  
In the DVD mode this key will not  
operate.  
“LINE” or TV channel will display on the screen for 4 seconds.  
LINE  
1. To connect the TV/DVD to a VCR  
Press the INPUT SELECT to select the desired mode to use the TV as a monitor.  
Operate your VCR as usual.  
VCR  
Front of TV/DVD  
VIDEO IN  
AUDIO IN (R)  
AUDIO IN (L)  
To Audio/Video  
OUT  
2. To connect the TV to a camcorder  
To playback from the camcorder, connect the camcorder to the TV/DVD as shown.  
Camcorder  
Front of TV/DVD  
VIDEO IN  
To Audio/Video OUT  
AUDIO IN (R)  
AUDIO IN (L)  
Audio/Video cord (not supplied)  
3. To connect the TV to a TV Game  
VIDEO IN  
Front of TV/DVD  
AUDIO IN (R)  
AUDIO IN (L)  
To Audio/Video OUT  
Audio/Video cord (not supplied)  
NOTES:  
• You can also change the TV screen to LINE by pressing INPUT SELECT. But this screen is normal.  
• The TV/DVD can also be used as a display device for many video games. However, due to the wide variety of different  
types of signal generated by these devices and subsequent hook-up variations required, they have not all been included  
in the suggested connection diagrams. You'll need to consult each component's Owner's Manual for additional information.  
41  
5E80301A E (38-41)  
41  
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting  
Use the following check list for troubleshooting when you have problems with your unit. Consult your local dealer  
or service outlet if problems persist.  
Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
POWER  
• Make sure the power cord is plugged in.  
• Try another AC outlet.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit, then plug it back in.  
10  
TV/DVD does not operate.  
TV BROADCAST RECEPTION  
• Station or CATV experiencing problems, tune to another station. 14  
Poor sound or No sound  
• Check Volume adjustments.  
• Check for sources of possible interference.  
14  
44  
14  
11,12  
44  
• Station or CATV experiencing problems, tune to another station.  
• Check antenna or CATV connections, reorient antenna.  
• Check for sources of possible interference.  
Poor picture or No picture  
22  
• Check picture control adjustments.  
• Station or CATV experiencing problems, tune to another station. 14  
• Station signal is weak, reorient antenna to receive weaker station. 11,12  
Poor reception on some channels  
• Check for sources of possible interference.  
44  
• Station or CATV experiencing problems, tune to another station. 14  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
18  
22  
Poor color or no color  
• Check antenna or CATV connections, reorient antenna.  
• Check for sources of possible interference.  
11,12  
44  
14  
18  
• Station or CATV experiencing problems, tune to another station.  
• Make sure channels are set into memory.  
• CATV company is scrambling signal.  
• Check antenna orientation.  
• Check all CATV connections.  
Picture wobbles or drifts  
No CATV reception  
11  
12  
17  
14  
• Set TV/CATV menu option to the CATV mode.  
• Station or CATV system problems, try another station.  
Horizontal or diagonal bars on  
screen  
• Check antenna connections, reorient antenna.  
• Check for sources of possible interference.  
11,12  
44  
• Make sure TV/CATV menu option is in the appropriate mode.  
• If using antenna, check UHF antenna connections.  
17  
11  
No reception above channel 13  
• No broadcast on station tuned.  
• Sleep Timer is set.  
• Power interrupted.  
18  
15  
TV shuts off  
• TV station experiencing problems or program tuned is not closed  
captioned. Try another channel.  
14  
• Check CATV connection or VHF/UHF antenna, reposition or ro- 11,12  
tate antenna.  
Closed - Caption is not activated.  
• Press TV/CAP/TEXT button to turn on the closed caption de-  
coder.  
16  
Display is not shown in your  
language.  
• Select proper language in the menu options.  
13  
42  
5E80301A E (42-BACK)  
42  
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and troubleshooting  
SYMPTOMS  
POSSIBLE SOLUTIONS  
PAGE  
DVD  
• No disc is inserted.  
• The disc may be dirty. Clean up the disc.  
• The unit cannot play CD-ROMs, etc.  
26  
6
Playback doesn’t start.  
No picture  
• TV/DVD selector is not set correctly.  
25  
• Check the input selector of the amplifier is set properly.  
• The unit is in the Special playback mode.  
• Select the correct Audio Output position on AV amplifier.  
27  
40  
No sound  
Picture is distorted during CUE or • The picture will be distorted occasionally.  
REVIEW.  
Stopping playback, search, slow-  
motion play, repeat play, or  
program play, etc. cannot be  
performed.  
• Some discs may not do some of the functions.  
No 4:3 (16:9) picture  
No on-screen display  
No surround sound  
• The setup does not match your TV.  
• Select Display On.  
33  
33  
40  
• The setup does not match your stereo system.  
The unit or remote operation key  
is not functioning.  
• Turn off the unit and unplug the AC power cord for several min-  
utes, then replug it.  
Playback does not start when the  
title is selected.  
• Check the RATING LEVEL setup.  
36~38  
Audio soundtrack and/or subtitle  
language is not changed when  
you play back a DVD.  
• Multilingual language is not recorded on the DVD disc.  
33  
• Some discs have no subtitles.  
• Subtitles are cleared. Press SUB TITLE.  
No subtitle  
31  
Angle cannot be changed.  
• Multi-angles are not recorded on the DVD disc.  
• The function is prohibited with the unit or the disc.  
32  
” appears on the screen.  
REMOTE CONTROL  
• Aim at the remote control at the remote sensor.  
• Operate within Approx. 5 Meters or reduce the light in the room.  
• Clear the path of the beam.  
• The batteries are weak. Replace the batteries.  
• Check the batteries are inserted correctly.  
The remote control does not  
function.  
10  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT  
WWW.MEMCORPINC.COM OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO RETURN THIS  
PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INT'L AT 1-800-321-6993.  
43  
5E80301A E (42-BACK)  
43  
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF  
antenna. Outdoor antennas are recommended for best results. The most common types of television  
interference are shown below. If one of these symptoms appear when the TV/DVD is connected to a Cable  
TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter or  
drift. Usually caused by interference from automobile ignition systems,  
neon lamps or AC powered tools and appliances such as drills or hair  
dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV/DVD is located far from the TV station, in a fringe reception  
area where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST  
or BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV/DVD from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other furniture.  
Use caution when cleaning or wiping the plastic parts.  
44  
5E80301A E (42-BACK)  
44  
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
GENERAL  
Power supply:  
Power consumption:  
AC 120V 60Hz  
Operation: 90W  
Standby: 5W  
Weight:  
47.4lbs (21.5 kg)  
Dimensions:  
Width  
Height  
Depth  
: 19-1/4 inches (489 mm)  
: 18-7/8 inches (480 mm)  
: 18-5/16 inches (465 mm)  
Operating temperature: 5° - 40°C  
Operating humidity:  
TELEVISION  
Less than 80%  
Picture tube:  
Tuner type:  
19” (480 mm diagonal)  
Quartz PLL Frequency Synthesized  
Receiving channels:  
VHF  
UHF  
CATV  
2-13  
14-69  
14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
Antenna input:  
Speaker:  
Audio output power:  
DVD/CD player  
Signal system:  
Applicable disc:  
VHF/UHF In 75 ohm coaxial  
3" (76 mm), 8 ohm x 2  
2.5W + 2.5W  
NTSC  
1. DVD (12cm, 8cm)  
2. CD (12cm, 8cm)  
Audio characteristics:  
Frequency response:  
Input/Output:  
DVD: 4Hz - 22KHz  
CD: 4Hz - 20KHz  
Inputs : Video : (RCA) 1 Vp-p/75 ohms  
Audio : (RCA) –8 dB/50 Kohms  
Outputs : Video : (RCA) 1 Vp-p/75 ohms  
Audio : (RCA) –8 dB/1 Kohm  
0.5Vp-p 75ohms terminated  
Digital audio out:  
Pickup:  
CD :  
Wavelength: 775 - 815 nm  
Maximum output power: 0.5 mW  
Wavelength: 650 - 666 nm  
DVD :  
Maximum output power: 2.0 mW  
ACCESSORY:  
Remote control x 1  
45  
5E80301A E (42-BACK)  
45  
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ESPAÑOL  
El símbolo del rayo dentro de un  
triángulo equilátero tiene por finalidad  
alertar al usuario acerca de la  
presencia de tensión peligrosa (sin  
aislación) en el interior del producto,  
que puede tener la intensidad suficiente  
como para constituir un riesgo de  
descarga eléctrica.  
PRECAUCION  
RIESGO DE DESCARGA  
ELECTRICA NO ABRIR  
AVISO:  
PARA REDUCIR EL RIESGO DE DESCARGA  
ELECTRICA, NO RETIRE LA CUBIERTA (O  
POSTERIOR). EN EL INTERIOR DEL APARATO  
NO HAY COMPONENTE ALGUNO QUE  
PRECISE SERVICIO DE MANTENIMIENTO A  
CARGO DEL USUARIO. SOLICITE CUALQUIER  
OPERACION DE MANTENIMIENTO A PER-  
SONAL DE SERVICIO CALIFICADO.  
El signo de exclamación dentro de un  
triángulo equilátero tiene por finalidad  
alertar al usuario de importantes  
instrucciones de operación y  
mantenimiento (servicio) en la literatura  
que acompaña a este aparato.  
AVISO: Para reducir el riesgo de incendio o descarga eléctrica, no exponga esta unidad a la lluvia ni a la  
humedad.  
ADVERTENCIA: Este equipo ha sido sometido a pruebas y cumple con los límites establecidos para un aparato  
digital de Clase B, de acuerdo con la Parte 15 del Reglamento de la FCC. Estos límites están  
diseñados para proporcionar protección razonable contra interferencias perjudiciales en una  
instalación residencial. Este equipo genera o emplea energía de radiofrecuencia y, si no es  
instalado y empleado de acuerdo con estas instrucciones, puede causar interferencias  
perjudiciales a las radiocomunicaciones.  
Sin embargo, no garantizamos que no ocurrirán interferencias en una instalación en particular.  
Si este equipo causa interferencias perjudiciales a la recepción radial o televisiva, situación que  
puede ser determinada apagando y encendiendo el equipo, se sugiere al usuario que trate de  
corregir tal interferencia mediante una o más de las siguientes medidas:  
- Reorientar o relocalizar la antena receptora.  
- Incrementar la separación entre el equipo y el receptor.  
- Conectar el equipo a un tomacorriente o circuito diferente al que está conectado al receptor.  
- Consultar con el concesionario o un técnico experimentado solicitándole su asistencia.  
PRECAUCION: El usuario corre el riesgo de perder la autorización para hacer funcionar este equipo en caso  
de que ejecute un cambio o modificación no aprobado por la parte responsable para la  
conformidad con las Reglas FCC.  
DERECHOS DE AUTOR: Se permite grabar programas de televisión, películas, cintas de vídeo y otro material  
sólo en caso de que no se violen los derechos de autor y otros derechos de terceros.  
Lugar de la marca requerida  
PRECAUCION:  
La hoja de especificaciones y las  
precauciones para su seguridad están  
SISTEMA LASER.  
ESTE TOCADISCOS DE VIDEO DIGITAL UTILIZA UN  
en la parte trasera del aparato.  
PARA UTILIZAR CORRECTAMENTE ESTE PRODUCTO, LEA  
CUIDADOSAMENTE ESTE MANUAL DE INSTRUCCIONES Y  
GUARDELO PARA SU REFERENCIA EN EL FUTURO. SI  
FUERA NECESARIO HACER UN MANTENIMIENTO DE  
ESTE APARATO, CONSULTE CON UN CENTRO DE  
SERVICIO AUTORIZADO-LEA EL PROCEDIMIENTO DE  
SERVICIO.  
EL USO DE LOS CONTROLES, AJUSTES O LA  
REALIZACION DE OTROS PROCEDIMIENTOS QUE NO  
SEAN LOS ESPECIFICADOS AQUI PUEDE PROVOCAR  
UNA EXPOSICION A RADIACIONES PELIGROSAS.  
PARA EVITAR LA EXPOSICION DIRECTA A LOS RAYOS  
LASER, NO TRATE DE ABRIR LA CAJA. PUEDE HABER  
UNA RADIACION LASER VISIBLE AL ABRIR LA CAJA.  
NORMAS DE PRESTACIONES CON  
NO MIRE HACIA EL RAYO.  
CERTIFICACION: CUMPLE CON LAS  
RADIACION DE LA FDA, 21 CFR  
SUBCAPITULO J.  
2
5E80301A S (02-05)  
2
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARA SU SEGURIDAD  
1. LEA LAS INSTRUCCIONES  
Antes de usar la unidad, lea detenidamente todas las instrucciones de seguridad y operación.  
2. CONSERVE ESTE MANUAL DE INSTRUCCIONES  
Conserve las instrucciones de seguridad y operación para consultas futuras.  
3. RESPETE LAS ADVERTENCIAS  
Observe estrictamente todas las advertencias impresas en la unidad y las incluidas en el manual de instrucciones.  
4. SIGA LAS INSTRUCCIONES  
Siga todas las instrucciones de operación y uso.  
5. LIMPIEZA  
Antes de limpiar este videograbador, desconéctelo del tomacorriente mural. No use limpiadores líquidos ni  
aerosol. Utilice sólo un paño húmedo para limpiar el exterior del mueble.  
6. ENCHUFES  
El fabricante de esta unidad no hace ninguna recomendación de accesorios ya que pueden ser peligrosos.  
7. AGUA Y HUMEDAD  
No utilice este aparato cerca del agua. Por ejemplo cerca de una bañera, lavabo, pileta de la cocina,  
lavadero, en un sótano húmedo o cerca de una piscina.  
8. ACCESORIOS  
No instale esta unidad en un carro, soporte, trípode o mesa inestables. La unidad podría caerse, causando  
serias lesiones, resultando también severamente dañada a la unidad.  
8A. La combinación de aparato y carro deberá ser movida con cuidado. Las detenciones bruscas, la fuerza  
excesiva y las superficies disparejas podrán hacer que el aparato y el carro se vuelven.  
9. VENTILACION  
Las ranuras y aberturas en la parte trasera o inferior del mueble son para ventilación y permiten un  
funcionamiento fiable de la unidad, protegiendo contra calentamiento excesivo. Estas aberturas no deberán  
ser bloqueadas ni cubiertas. Para evitar bloquear las aberturas, nunca sitúe la unidad encima de una  
cama, sofá, alfombra u otra superficie similar. Tampoco instale la unidad  
cerca o encima de un radiador o calefactor. La unidad no deberá ser instalado  
en un mueble empotrado, como ser una repisa para libros o bastidor, a menos  
que se pueda garantizar una ventilación adecuada, o cuando las instrucciones  
del fabricante así lo especifiquen.  
AVISO PARA CARRO PORTATIL  
(símbolo provisto por RETAC)  
10. FUENTES DE ALIMENTACION  
Esta unidad sólo deberá ser operada mediante el tipo de fuente de alimentación  
especificado en la etiqueta indicadora. Si no está seguro del tipo de fuente de  
alimentación que tiene en su casa, consulte a su distribuidor o a la  
compañía de electricidad local. En el caso de unidades diseñadas para  
S3126A  
funcionar a pilas o con otras fuentes de alimentación, consulte el manual de instrucciones respectivo.  
11. CONEXIÓN A TIERRA O POLARIZACION  
Esta unidad está equipada con una clavija polarizada de corriente alterna (una clavija que tiene una espiga  
más ancha que la otra). Esta clavija solamente puede ser insertada en el tomacorriente en una sola  
dirección. Esta es una medida de seguridad. Si no pudiera insertar completamente la clavija en el  
tomacorriente, vuelva a intentarlo invirtiendo la clavija. Si aún no fuera posible insertar la clavija, tome  
contacto con un electricista para que reemplace su tomacorriente obsoleto. Si su unidad está equipada con  
una clavija de conexión a tierra de 3 alambres (una clavija con una tercera espiga de conexión a tierra), no  
modifique las características de seguridad de la clavija polarizada. Este tipo de clavija sólo puede ser  
insertado en un tomacorriente con contacto a tierra. Esto también es una medida de seguridad. Si no  
pudiera insertar la clavija en el tomacorriente, tome contacto con un electricista para que reemplace su  
tomacorriente obsoleto. No modifique las características de seguridad de la clavija de conexión a tierra.  
3
5E80301A S (02-05)  
3
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARA SU SEGURIDAD  
12. PROTECCION DEL CABLE DE ALIMENTACION  
Los cables de alimentación deberán ser tendidos de manera tal que la probabilidad de que sean pisados o  
aplastados por otros objetos sea mínima. Preste especial atención a las clavijas de los cables, a los  
receptáculos, y al punto por donde salen del aparato.  
13. TORMENTAS ELECTRICAS  
Como medida de protección durante tormentas eléctricas, o cuando el videograbador permanezca sin uso  
durante períodos prolongados de tiempo, desconéctelo del tomacorriente mural y desconecte la antena o  
el sistema de cable. Esto evitará que la unidad resulte dañada por tormentas eléctricas o sobretensiones  
en la línea de alimentación.  
14. LINEAS DE ALIMENTACION  
Una antena exterior no deberá ser instalada en la cercanía de líneas de alimentación aéreas ni de otros  
circuitos de iluminación eléctrica o potencia, o donde pueda caerse y hacer contacto con tales líneas o  
circuitos. Al instalar un sistema de antena exterior, tenga mucho cuidado de no tocar tales líneas o circuitos  
de alimentación, ya que el contacto con ellos podría ser fatal.  
15. SOBRECARGA  
No sobrecargue los tomacorrientes murales ni los cables de extensión, ya que esto podría causar  
incendios o descargas eléctricas.  
16. ENTRADA DE OBJETOSY LIQUIDOS  
Nunca introduzca objetos de ningún tipo por las aberturas de la unidad, ya que podría tocar peligrosos  
puntos de alta tensión o piezas de cortocircuito, provocando incendios o descargas eléctricas. Nunca  
derrame ni rocíe ningún tipo de líquido sobre la unidad.  
17. CONEXION A TIERRA DE LA ANTENA EXTERIOR  
Si se conecta una antena externa o sistema de cable a la unidad, cerciórese de que el sistema de antena o  
cable está conectado a tierra para darle protección contra sobretensión y acumulación de carga estática.  
La Sección 810 del Código Nacional de Electricidad, ANSI/NFPA 70, entrega información acerca de la  
manera correcta de conectar a tierra el mástil y la estructura soportante, puesta a tierra del alambre de  
entrada a una unidad de descarga de antena, tamaño de los conductores de puesta a tierra, ubicación de la  
nidad de descarga de la antena, conexión a los electrodos de tierra, y requisitos para el electrodo de tierra.  
18. SERVICIO  
No intente reparar la unidad usted mismo; al abrir o retirar las cubiertas usted se expondrá a alta tensión y  
a otros peligros. Solicite todo servicio a personal calificado.  
Ejemplo:  
a. Cuando el cable de alimentación o la clavija estén dañados.  
b. Si se ha derramado líquido sobre la unidad, o si algún objeto ha caído dentro del videograbador.  
c. Si la unidad ha sido expuesta a la lluvia o al agua.  
d. Cuando a pesar de haber seguido las instrucciones de operación, la unidad no funcione normalmente.  
Ajuste solamente los controles indicados en el manual de instrucciones; el ajuste incorrecto de otros  
controles podrá causar daños a la unidad, la que por lo general requerirá de un prolongado trabajo  
de reparación (por un técnico calificado) para que sus condiciones normales de operación puedan  
ser restablecidas.  
e. Si la unidad se ha caída o si el gabinete se ha dañado.  
f. Cuando la unidad muestre un cambio notorio en su rendimiento.  
19. PIEZAS DE REPUESTO  
Cuando sea necesario reemplazar piezas, asegúrese de que el técnico de servicio emplee las piezas de  
repuesto especificadas por el fabricante, o piezas que tengan las mismas características que las piezas  
originales. Los cambios no autorizados podrán causar incendios, descargas eléctricas y otros problemas.  
20. REVISION DE SEGURIDAD  
Al finalizar cualquier servicio de mantenimiento o reparación de esta unidad, solicítele al técnico que  
efectúe comprobaciones de seguridad para determinar si el videograbador se encuentra o no en  
condiciones óptimas de operación.  
21. CALOR  
El producto debe ser situado lejos de fuente de calor como radiadores, reguladores de calefacción, estufas o  
otros productos (incluyendo amplificadores) que se producen calor.  
22. BANDEJA DEL DISCO  
No acerque sus dedos a la bandeja del disco cuando se está cerrando. Puede recibir heridas graves.  
23. CONEXION  
Cuando conecte el producto a otro equipo, desconecte la alimentación y desenchufe todos los equipos del  
tomacorriente. Si no lo hace, puede provocar una descarga eléctrica y heridas graves.  
Lea cuidadosamente el manual de instrucciones del otro equipo y respete las instrucciones al hacer las  
conexiones.  
24. VOLUMEN DEL SONIDO  
Reduzca el volumen a su nivel mínimo antes de conectar el producto. De lo contrario, un volumen alto  
puede lastimar sus oídos o en los altavoces.  
4
5E80301A S (02-05)  
4
22/01/2003, 21:48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARA SU SEGURIDAD  
25. DISTORSION DEL SONIDO  
No permita que sigan saliendo sonidos distorsionados de este producto durante mucho tiempo. Puede  
provocar un calentamiento excesivo del altavoz que resulte en un incendio.  
26. ALTAVOCES  
Cuando utilice altavoces, mantenga el volumen a un nivel moderado. Si utiliza los altavoces continuamente  
a un volumen alto, puede lastimar sus oídos.  
27. RAYO LASER  
No mire por la ranura de la bandeja del disco por las salidas de circulación de aire del producto para ver la  
fuente del rayo láser. Puede dañar sus ojos.  
28. DISCO  
No utilice un disco rayado, deformado o reparado. Estos discos se pueden romper fácilmente y provocar  
serias heridas o averías en el producto.  
29. NOTA PARA LA PERSONA QUE INSTALE EL SISTEMA CATV  
Se ha incluido este recordatorio para llamar la atención de quien instale el sistema CATV, con respecto al  
Artículo 820-40 de la NEC, que entrega directivas de guía para realizar una conexión adecuada a tierra y,  
en particular, especifica que el cable de puesta a tierra debe ser conectado al sistema de conexión a tierra  
del edificio, lo más cerca del punto de entrada del cable como sea posible.  
EJEMPLO DE CONEXION A TIERRA DE LA ANTENA  
SEGUN EL CODIGO NACIONAL DE ELECTRICIDAD  
ALAMBRE DE ENTRADA DE LA ANTENA  
ABRAZADERA  
DE TIERRA  
UNIDAD DE DESCARGA DE LA ANTENA  
(NEC, SECCION 810-20)  
CONDUCTORES DE PUESTA A  
TIERRA (NEC, SECCION 810-21)  
EQUIPO DE SERVICIO  
ELECTRICO  
ABRAZADERAS DE TIERRA  
SERVICIO DE ALIMENTACION DE SISTEMA  
NEC - CODIGO NACIONAL DE ELECTRICIDAD  
ELECTRODO DE PUESTA A TIERRA  
(NEC ART 250, PARTE H)  
S2898A  
5
5E80301A S (02-05)  
5
22/01/2003, 21:49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notas sobre los discos  
Manejo de los discos  
Estructura del contenido del disco  
Normalmente, los DVD se dividen en títulos, y los títulos  
se subdividen en capítulos. Los CDs de AUDIO se  
dividen en pistas.  
No toque el lado de reproducción del disco.  
Disco de vídeo DVD  
DISCO DVD  
TITULO 1  
TITULO 2  
CAPITULO 1 CAPITULO  
2
CAPITULO  
1
CAPITULO  
2
CAPITULO 3  
Lado de  
reproducción  
No pegue papel o cinta a los discos.  
CD de AUDIO  
AUDIO CD  
CANCION  
1
CANCION  
2
CANCION  
3
CANCION  
4
CANCION 5  
Limpieza de los discos  
Cada título, capítulo o pista tiene asignado un número,  
que se denomina "número del título", "número del  
capítulo" o "número de la pista", respectivamente.  
Puede haber discos que no tengan estos números.  
Las huellas y el polvo que haya en el disco deterioran  
la imagen y el sonido. Limpie el disco desde el centro  
hacia fuera con un paño suave. Mantenga limpio el  
disco.  
Notas sobre los derechos de autor  
La ley prohíbe copiar, difundir, mostrar, emitir por cable,  
reproducir en público y alquilar material sujeto a  
derechos de autor sin permiso.  
Este dispositivo no copia discos de vídeo DVD  
protegidos contra copia.  
Si no puede quitar el polvo con un paño suave, limpie  
el disco suavemente con un paño suave ligeramente  
humedecido y repáselo con un paño seco.  
No use ningún tipo de disolvente, como diluyente,  
bencina, limpiadores comerciales o esprays  
antiestáticos para LPs de vinilo. Si lo hace, podría  
dañar el disco.  
Este dispositivo no debe usarse para copiar contenido  
sujeto a derechos de autor sin el permiso expreso y por  
escrito del propietario de los derechos de autor.  
La obtención de dicho permiso es exclusiva  
responsabilidad del usuario.  
Este producto incorpora tecnología de protección de los  
derechos de autor respaldada por reivindicaciones de  
procedimientos de ciertas patentes estadounidenses y  
otros derechos de propiedad intelectual pertenecientes  
a Macrovision Corporation y a otros propietarios de  
derechos. El uso de esta tecnología de protección de  
los derechos de autor debe ser autorizado por  
Macrovision Corporation y está destinado únicamente  
para uso doméstico y otros usos de visualización  
limitada, a menos que Macrovision Corporation autorice  
lo contrario. Se prohíbe la ingeniería inversa o el  
desensamblaje.  
Almacenamiento de los discos  
No almacene los discos en lugares con luz directa del  
sol o cerca de fuentes de calor.  
No almacene los discos en lugares con altos niveles  
de humedad, como un baño o cerca de un  
humidificador. Guarde los discos.  
Verticalmente en una caja. Si apila o coloca objetos  
encima de discos sin estar protegidos por la caja,  
éstos pueden doblarse.  
6
5E80301A S (06-11)  
6
22/01/2003, 21:49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Indice  
Antes de utilizear su aparato  
PARA SU SEGURIDAD ....................................................... 3  
Notas sobre los discos ......................................................... 6  
Indice.................................................................................... 7  
Partes y sus funciones ......................................................... 8  
Control remoto ..................................................................... 9  
Fuente de alimentación...................................................... 10  
Conexiones de la antena ................................................... 11  
Conexiones de TV cable .................................................... 12  
Operacion del TV  
Seleccion de idioma en pantalla ........................................ 13  
Operacion TV ..................................................................... 14  
Subtítulo cerrado................................................................ 16  
Para memorizar canales .................................................... 17  
Seleccion Chip-V................................................................ 19  
Ajustes de control de imagen ............................................. 22  
Programa de audio separado (SAP) y estereo .................. 23  
Función de reproducción  
Disco .................................................................................. 24  
Preparación/estado del disco ............................................. 25  
Procedimiento de reproducción ......................................... 26  
Reproducción especial ....................................................... 27  
Función de adelantada  
Zoom/Búsqueda de la escena deseada............................. 28  
Reproducción repetida/Aleatoria/programada y Repeat A-B ....... 29  
Marcación de escenas deseadas....................................... 30  
Cambio del idioma de la pista de sonido/Subtítulos .......... 31  
Cambio de ángulos/Selección de título/Menú DVD ........... 32  
Información adicional  
Seleccion de idioma en pantalla ........................................ 33  
Ajuste de la relación de aspecto de la pantalla de TV/  
Selección de las indicaciones en la pantalla...................... 34  
Control de Gama Dinámica ................................................ 35  
Ajuste de restricciones para menores................................ 36  
Cambio del nivel de restricciones para menores ............... 37  
Deshabilitación temporal del nivel de rating (clasificación)  
por disco DVD .................................................................... 38  
Lista de códigos de idiomas............................................... 39  
Conexiones de toma Audio/Video...................................... 40  
Problemas y localización de averías.................................. 42  
Disturbios de recepcion...................................................... 44  
Especificaciones ................................................................ 45  
7
5E80301A S (06-11)  
7
22/01/2003, 21:49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Partes y sus funciones  
Delantera  
Botones de volumen  
Bandeja del disco  
Botones de salto (SKIP)  
(VOLUME /)  
Botón de apertura/cierre (OPEN/CLOSE)  
Sensor de control remote  
Tomas AUDIO IN (L/R)/  
VIDEO IN (LINE)  
Interruptor de  
alimentación (POWER)  
Toma de auriculares  
Botón parada (STOP)  
Botón reproducción (PLAY)  
Indeicador POWER  
Botones selectores de canal  
(CHANNEL /)  
Trasera  
Toma VIDEO OUT  
Tomas AUDIO OUT (L/R)  
Jack de la  
antena de  
VHF/UHF  
Toma de dalida COAXIAL DIGITAL AUDIO OUT  
Cordón de CA  
8
5E80301A S (06-11)  
8
22/01/2003, 22:15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control remote  
Página  
POWER  
Conexión/Desconexión  
13,14,25  
DISPLAY/CALL  
Consultar información de la TV  
Consultar información del DVD  
15  
25  
TV/DVD  
OPEN/CLOSE  
0-9  
Cambiar entre TV/AV y DVD  
Abra o cierre la bandeja  
25  
26,38  
Dirigir selección de canales de la TV 14,18  
Introducir ajuste  
28,29  
Entre una contraseña  
19,21,36~38  
VOLUME+/–  
Ajustar volumen de TV  
14  
15  
CH  
/
Seleccionar canal de TV  
Botones de cursor  
SELECT/ENTER  
Introducir información en el menú  
Seleccionar opciones del menú  
13,19,21  
28,29,32~38  
Botones de cursor  
13,17~22  
26,28,32  
MUTE  
Quitar el sonido  
15  
32  
DVD MENU  
RETURN  
Mostrar el menú del DVD  
Quitar el menú del DVD  
33~38  
SETUP/TV MENU  
Mode de TV-Mostrar el menú de la TV 13,17~22  
Mode de DVD-Llamar el modo de  
ajuste inicial  
33~37  
AUDIO  
Cambiar el sonido de la TV  
Cambie el idioma de la pista de sonido  
23  
31  
ANGLE  
Cambie el ángulo de reproducción  
Mostrar subtítulos  
32  
31  
SUB TITLE  
CANCEL  
Resetear información en el menú 19,22,28,36  
TOP MENU  
ZOOM/QUICK VIEW  
Seleccione el título  
32  
Cambiar entre el canal actual/anterior  
Zoom  
15  
28  
INPUT SELECT  
SLEEP  
Cambiar entre TV/AV  
41  
Desactivación Automática (Sleep Timer) 15  
SLOW  
Avance/retroceso-cámara lenta  
23  
27  
PAUSE/STILL  
Pausa sonido del CD  
Fijar imagen del DVD  
PLAY MODE  
SEARCH  
PLAY  
Seleccione el modo de reproducción  
29  
Reproducción en avance/retroceso rápidos 27  
Reproducción 26,27,29,32,38  
SKIP  
Salte el capítulo en avance o retroceso  
27  
29  
30  
28  
16  
STOP  
Parada  
MARKER  
JUMP  
Localización de la escena deseada  
Indice  
TV/CAP/TEXT  
Cambiar entre TV/Caption/Text  
Modo Caption Cerrado  
REPEAT A-B  
Repita la reproducción entre A y B  
29  
9
5E80301A S (06-11)  
9
22/01/2003, 22:15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control remoto  
Coloque las pilas  
Abrir la tapa del compartimento  
de las pilas siguiendo la  
dirección de la flecha.  
Coloque dos pilas “AAA”, (no  
suministradas) prestando  
atención a las marcas de  
polaridad en el compartimiento  
de las pilas.  
Recoloque la tapa del  
compartimiento.  
1
2
3
Funcionamiento  
• Apunte el mando a distancia al sensor remoto y  
presione los botones de control para hacer  
funcionar.  
• Utilice el control remoto dentro de un ángulo de  
30˚ hacia ambos lados del sensor remoto, hasta  
una distancia de unos 5 metros.  
Approx. 5 meters  
PRECAUCION CON LAS PILAS  
Las precauciones a continuación deben ser cumplidas cuando se utilizan pilas en esta unidad:  
1. Utilice solo un tipo especificado de pilas.  
2. Cuando coloca las pilas asegúrese de colocarlas con la polaridad correcta, tal como se indica en el  
compartimiento de las pilas. Las pilas colocadas invertidas pueden causarle daños a la unidad.  
3. No mezcle tipos diferentes de pilas (ej.: pilas alcalinas y carbón zinc), o pilas viejas y nuevas.  
4. Si la unidad no va a ser utilizada por un largo período, extraiga las pilas para evitar daños o heridas  
resultantes de posibles fugas.  
5. No intente recargar las pilas que no sean recargables ya que se pueden recalentar y romperse (Siga las  
indicaciones del fabricante de pilas).  
Fuente de alimentación  
PARA UTILIZAR CORRIENTE ALTERNA (CA)  
Para alimentación de CA, use el cable de CA polarizado incluido.  
Tomacorriente de CA  
Inserte la clavija del cable de CA en un tomacorriente estándar de  
CA de 120 V 60 Hz polarizado.  
más anchos  
Orificio y hoja  
NOTAS:  
• Nunca conecte el enchufe cordon de CA a otro voltaje que no  
sea el especificado (120V 60Hz).  
Utilice solamente el cordon eléctrico suministrado.  
• Si el cordon de CA polarizada no se ajusta en un tomacorriente  
de CA no polarizada, no intente limar o cortar las clavijas.  
Es responsabilidad de usuario hacer que un electricista  
reemplace el tomacorriente inadecuado.  
• Si usted causa una descarga estática cuando toca la undad y  
Cable de corriente alterna polarizado  
(una pata es más ancha que la otra.)  
este falla, simplemente desenchufe la unidad del tomacorriente,  
espere algunos minutos y enchufela otra vez. La unidad deberá  
funcionar normalmente.  
• Si el cable de CA se enchufa por vez primera, espere unos 5  
segundos antes de presionar el botón POWER.  
10  
5E80301A S (06-11)  
10  
22/01/2003, 21:49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conexiones de la antena  
Si usted está utilizando una antena para interiores o exteriores, siga las instrucciones de abajo que  
correspondan a su sistema de antena. Si está utilizando el servicio de TV cable (CATV), vea la página 11  
para las conexiones de TV cable.  
Antena combinada de VHF/UHF (Cable único de 75 ohmios o cable con doble  
conductor de 300 ohmios)  
Conecte el cable de 75 ohmios de la antena  
combinada de VHF/UHF en el jack de la antena.  
Si su antena combinada de VHF/UHF posee un  
cable de dos conductores de 300 ohmios, es posible  
que sea necesario utilizar un transformador de  
adaptación de 300-75 ohmios.  
Jack de  
antena  
Jack de  
antena  
Cable  
coaxial de  
75 ohmios  
Transformador de  
adaptacion de 300-  
75 ohmios  
Antena combinada de VHF/UHF (Cables de 300 ohmios independientes de dos  
conductores de VHF y de UHF)  
Conecte el cable de dos conductores de 300 ohmios  
de UHF en el combinador (no suministrado).  
Transformador de  
adaptacion de  
300-75 ohmios  
Conecte el cable de dos conductores de 300 ohmios  
de VHF en el transformador de adaptación de 300-  
75 ohmios.  
Jack de  
antena  
Conecte el transformador al combinador, y luego  
conecte el combinador al jack de la antena.  
Combinador  
UHF 300 ohmios  
VHF 300 ohmios  
Antenas independientes de VHF/UHF (cable de VHF de 75 ohmios y cables de dos  
conductores UHF de 300 ohmios)  
Conecte el cable de 75 ohmios de VHF y el cable  
de dos conductores de 300 ohmios de UHF al  
combinador (no suministrado). Conecte el  
combinador en el jack de la antena.  
Jack de  
antena  
VHF 75 ohmios  
Combinador  
UHF 300 ohmios  
11  
5E80301A S (06-11)  
11  
22/01/2003, 21:49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conexiones de TV cable  
EsteTV/DVD posee amplios límites de sintonización y puede ser sintonizado a la mayoría de los canales  
de cable sin utilizar una caja convertidora de TV cable. Algunas de las compañías de TV cable ofrecen  
“canales pagados premiados” en los cuales la señal ha sido codificada. La decodificación de estas  
señales para la recepción normal requiere el uso de un mecanismo decodificador que lo suministra  
generalmente la compañía de cable.  
PARA ABONADOS AL SERVICIO BASICO DE TV CABLE  
Para el servicio básico de cable y cuando no es necesario un  
convertidor/caja decodificadora, conecte el cable coaxial de 75  
ohmios de CATV al jack de la antena en la parte trasera del  
TV/DVD.  
Jack de  
antena  
Cable coaxial de  
75 ohmios  
PARA ABONADOS AL SERVICIO CODIFICADO DE TV CABLE  
Si usted es abonado a un servicio de TV cable que requiere el uso de un convertidor/caja decodificadora,  
conecte el cable coaxial entrante de 75 ohmios al convertidor/caja decodificadora. Utilizando otro cable coaxial  
de 75 ohmios conecte el jack de salida del convertidor/caja decodificadora al jack de la antena del TV/DVD. Vea  
las conexiones mostradas abajo. Sintonice el TV/DVD al canal de salida del convertidor/caja decodificadora  
(generalmente canal 3 ó 4), y utilice el convertidor/caja decodificadora para seleccionar los canales.  
Cable entrante  
de 75 ohmios  
de CATV  
Jack de  
antena  
Cable de 75  
ohmios el TV/DVD  
Convertidor/Decodificador  
PARA ABONADOS AL SERVICIO DE TV CABLE BASICO NO CODIFICADO CON CA-  
NALES PREMIADOS CODIFICADOS  
Si usted está abonado a un servicio de TV cable en el cual los canales básicos no están codificados y los  
canales premiados requieren el uso de un convertidor/caja decodificadora, puede desear utilizar un divisor de  
señales y una caja de conmutación A/B (disponible en las compañías de cable o en las tiendas de artículos  
electrónicos). Vea las conexiones mostradas abajo. Con el conmutador en la posición "B", usted puede  
sintonizar directamente cualquiera de los canales no codificados en su TV/DVD. Con el conmutador en la  
posición "A", sintonice su TV/DVD a la salida del convertidor/caja decodificadora (generalmente canal 3 ó 4), y  
utilice el convertidor/caja decodificadora para sintonizar los canales codificados.  
Convertidor/Decodificador  
Cable entrante  
de 75 ohmios  
de CATV  
Jack de  
antena  
Cable de 75  
ohmios el TV/DVD  
A
Conmutador A/B  
Divisor  
B
12  
5E80301A S (12-17)  
12  
22/01/2003, 21:50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Seleccion de idioma en pantalla  
Puede escoger entre tres idiomas diferentes (inglés, francés y español) para los despliegues en pantalla. Los  
menús y mensajes de ajuste aparecerán en el idioma de su elección.  
La selección de idioma en la pantalla (paso 5) aparecerá automáticamente en la pantalla cuando presione el  
botón MENU al principio. Seleccione primero el idioma preferido y vaya a las otras opciones de menú.  
Para encenber el TV/DVD, presione POWER se encenderá el  
indicador Power.  
1
Presione TV MENU.  
2
Aparecerá la pantalla del menú  
de la TV.  
Presione  
aparezca el menú OPTION.  
ó
hasta que  
3
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Presione  
seleccionar el modo LANGUAGE,  
luego presione  
ó
para  
4
5
6
ó
.
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
<
Presione  
ó
para  
seleccionar el idioma deseada:  
inglés (ENGLISH), español  
(ESPAÑOL) o francés  
(FRANCAIS), luego presione  
ENTER.  
LANGUAGE/IDIOMA/LANGUE  
ENGLISH  
ESPAÑOL  
FRANCAIS  
/
/ ENTER / MENU  
<
<
Presione TV MENU hasta que se  
borre la pantalla MENU.  
Notas:  
Si el aparato no funciona  
correctamente, o No se pueden  
presionar los botones (en la unidad  
y/o control remoto): La electricidad  
estática, etc. puede afectar el  
funcionamiento del tocadiscos.  
Desenchufe el cable eléctrico de CA  
una vez y vuelva a enchufar.  
La sección de laTV tiene su propio menú  
al igual que la sección del DVD (ver  
página 26).  
13  
5E80301A S (12-17)  
13  
22/01/2003, 22:35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operacion del TV  
Para encender el TV/DVD,  
presione POWER.  
1
2
Ajuste el nivel de volumen  
presionando VOLUME + ó . El  
nivel de volumen será indicado en  
la pantalla por medio de barras  
verdes y una indicación de  
número. A medida que el volumen  
aumenta, se incrementan el  
número de barras y la indicación  
de número. Si se reduce el volumen,  
el número de barras verdes y la  
indicación de número decrecen.  
VOLUME  
32  
Ajuste el modo TV/CATV  
a la posición apropiada.  
(Vea página 17.)  
3
4
TV  
- Canales de VHF/UHF  
CATV - Canales de TV CABLE  
Presione el botón de selección  
directa de canal.  
Selección directa de canal en  
modo de TV Cuando la opción de  
menú de TV/CATV sea ajustada al  
CH 012  
modo de TV, todos los canales podrán  
ser seleccionados en forma instan-  
tánea usando sólo dos botones.  
(Por ejemplo, para seleccionar el  
canal 2, presione “0” y “2”. Si usted  
sólo presiona “2”, la selección del canal se retardará unos  
minutos.) Para los canales de 10 en adelante, presione los dos  
digitos en orden.  
Selección directa de canal en modo de CATV  
Cuando la opción de menú de TV/CATV sea ajustada al modo de  
CATV, los canales podrán ser seleccionados de la siguiente  
forma:  
PARA SELECCIONAR LOS CANALES DE CATV:  
1-9  
Presione “0” dos veces, y luego 1-9 según sea necesario.  
Por ejemplo, para seleccionar el canal 2, presione "002".  
Primero presione “0”, y luego los 2 dígitos restantes.  
Por ejemplo, para seleccionar el canal 12, presione "012".  
Presione los 2 dígitos en orden.  
10-12  
13-99  
Por ejemplo, para seleccionar el canal 36, presione "36".  
100-125 Presione los 3 dígitos en orden.  
Por ejemplo, para seleccionar el canal 120, presione "120".  
NOTA REFERENTE A LOS CANALES 1 - 12:  
Si usted sólo presiona 1 ó 2 botones, el canal correspondiente  
será seleccionado al cabo de 2 segundos.  
CATV  
TV  
VHF  
2-13  
VHF  
2-13  
STD  
/
HRC  
(A)  
(AA)  
(AAA)  
(86)  
(A-5)  
(100)  
(5A)  
/
IRC  
(W)  
UHF  
14-69  
14-36  
37-59  
60-85  
86-94  
95-99  
(WW)  
(ZZZ)  
(94)  
(A-1)  
(125)  
NOTAS:  
• Si se ha seleccionado un canal sin  
emisión, el sonido se silenciará  
automáticamente.  
• Si una estación que estaba viendo  
deja de transmitir, el televisor se  
desconectará automáticamente  
después de 15 minutos.  
100-125  
01  
14  
5E80301A S (12-17)  
14  
22/01/2003, 22:35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operacion del TV  
CANAL  
/
Presione y libere CH  
ó
La  
unidad se detendrá  
automáticamente en el siguiente  
canal almacenado en la memoria.  
Antes de seleccionar canales, éstos  
deberán ser almacenados en la  
memoria del televisor. Consulte la  
sección “Cómo memorizar canales”  
en las páginas 17 y 18.  
LLAMADA  
STEREO SAP  
CH 012  
Presionar DISPLAY/CALL para ver  
la información actual en la pantalla.  
Presionar DISPLAY/CALL  
nuevamente para que desaparezca  
esta información.  
SEL. MONO+SAP  
Número de canal o modo de VIDEO  
• Stereo o status de audio SAP  
(programa secundario de audio)  
• Status de la salida de audio  
VISION RAPIDA  
Este botón le permite retroceder  
hasta el último canal sintonizado al  
presionar QUICKVIEW. Presione  
este botón otra vez para regresar al  
último canal que estaba mirando.  
SILENCIAMIENTO  
Presione MUTE botón para silenciar  
el sonido. El sonido del TV/DVD  
será silenciado y aparecerá  
brevemente en pantalla la indicación  
“MUTING”. El sonido puede ser  
devuelto a su nivel original  
MUTE  
presionando otra vez este botón o  
uno de VOLUME + ó .  
DORMIR  
SLEEP  
120  
Para programar el TV/DVD para que se  
apague después de cierto tiempo pro-  
gramado, presione SLEEP del control  
remoto. El reloj entrará en cuenta reg-  
resiva, 10 minutos por cada presión  
SLEEP (120, 110, ...10, 0). Después  
que el tiempo de apagado está pro-  
gramado, aparecerá una indicación brevemente cada diez minutos  
para recordarle que la función de apagado automático está  
activada. Para confirmar el tiempo del temporizador de apagado,  
presione SLEEP y el tiempo restante aparecerá brevemente.  
Para cancelar el temporizador de apagado, presione SLEEP  
varias veces hasta que la indicación muestre 0.  
15  
5E80301A S (12-17)  
15  
22/01/2003, 22:35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Subtítulo cerrado  
¿QUE ES LA RECEPCION DE TEXTO?  
Este televisor tiene capacidad para descodificar y mostrar los programas de televisión con emisión de texto.  
Esta función mostrará el texto en pantalla para los usuarios con problemas de audición o traducirá y mostrará  
el texto que se encuentre en otra lengua.  
Leyendas: Este modo de recepción de texto mostrará el texto  
en pantalla en inglés u otra lengua (dependiendo de la  
programación CH. 1 ó 2 de recepción de texto).  
Generalmente las emisiones de textos en inglés son recibidas  
en el canal 1 de recepción de texto y los textos en otras  
lenguas son recibidos en el canal 2 de recepción de texto.  
Texto: El modo de recepción de texto llenará la pantalla con la  
programación de programas y otras informaciones.  
Después de seleccionar uno de los modos de recepción de  
texto, éste continuará activado hasta que se lo cambie,  
independientemente de que se sintonice otro canal.  
Si se pierde la señal de la emisión de texto debido a un aviso  
comercial o al corte de la señal, las leyendas reaparecerán  
cuando la señal sea recibida nuevamente.  
Si se cambia de canal, las leyendas se retardarán en 10  
segundos aproximadamente. Las leyendas aparecerán en los  
lugares de la pantalla que interfieran mínimamente con la  
imagen, generalmente en la parte inferior de la misma. Los  
programas de noticias mostrarán generalmente tres líneas de  
leyendas que cambiarán en la pantalla. La mayoría de los  
otros programas ofrecen dos o tres líneas de leyendas  
colocadas cerca del personaje que está hablando de tal  
manera que el usuario pueda seguir el diálogo.  
Las letras itálicas o subrayadas indican títulos, palabras en  
lenguas extranjeras o palabras que requieren énfasis. Las  
letras de canciones aparecen encerradas entre notas  
musicales. Para recibir emisiones de programas de televisión  
con emisión de texto, refiérase a su guía de TV en la que  
estarán indicadas con el símbolo (CC).  
PARA MIRAR EMISIONES DE  
TEXTO  
Presione TV/CAP/TEXT para  
conmutar entre TV normal y los  
dos modos de recepción de  
texto (leyendas y texto en toda la  
pantalla). Este modo mostrará el  
texto en la pantalla para los  
usuarios con problemas de  
audición.  
NOTAS:  
Cuando seleccione la recepción de texto, las leyendas aparecerán durante 10 segundos aproximadamente.  
Si no se recibe la señal de emisión de texto, no aparecerán leyendas, pero el televisor permanecerá en el modo de  
recepción de texto.  
Cuando las leyendas estén en pantalla puede ser que las indicaciones de funciones como volumen y silenciamiento  
no aparezcan ya que interferirían con las leyendas.  
Ocasionalmente podrán aparecer faltas de ortografía o caracteres extraños durante la recepción de texto.  
Esto es normal en este modo, especialmente con los programas en vivo. Esto se debe a que durante los programas  
en vivo, los textos son ingresados sin edición, ya que no hay tiempo para la misma.  
Algunos sistemas de cable y sistemas de protección contra copias pueden interferir con la señal de emisión de texto.  
Si utiliza una antena interior o si la recepción del TV es muy insuficiente, el texto de las emisiones puede no aparecer  
o mostrar caracteres extraños y errores de ortografía. En tal caso, ajuste la antena para mejorar la recepción o utilice  
una antena externa.  
16  
5E80301A S (12-17)  
16  
22/01/2003, 22:35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Para menorizer canales  
Este TV/DVD está equipado con una función de memorización de canales que permite avanzar o retroceder al  
siguiente canal almacenado en la memoria, pasando por alto los canales no deseados. Antes de seleccionar  
canales, éstos deberán ser programados en la memoria del TV/DVD. Además de los canales normales de VHF y  
UHF, este TV/DVD puede recibir hasta 113 canales de TV cable. Para usar el TV/DVD con una antena, ajuste  
la opción de menú TV/CATV al modo “CATV”.  
SELECCION DE TV/CATV  
Presione TV MENU en el mode de TV.  
1
Aparece la pantalla del menú de la TV.  
Presione  
ó
hasta que  
2 aparezca el menú SETUP.  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Presione  
seleccionar el modo TV/CATV.  
ó
para  
3
4
TV/CATV  
ADD/DELETE  
CATV  
ADD  
AUTO CH MEMORY  
/
/
/
/MENU  
<
<
>
Presione  
ó
para  
seleccionar el modo TV ó CATV.  
La flecha indica el modo  
seleccionado.  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
TV  
ADD  
TV  
- Canales de VHF/UHF  
CATV - Canales de TV CABLE  
/
/
/
/MENU  
>
Presione TV MENU hasta que se  
5 borre la pantalla MENU.  
CANALES CATV  
El cuadro abajo muestra el sistema típico de la localización de los  
canales por cable.  
Números en este TV  
Canal de CATV correspondientes  
14  
A
15  
B
16  
C
17  
D
18  
E
19  
F
20  
G
21  
H
22  
I
23  
J
24  
K
25  
L
26  
M
27  
N
28  
O
29  
P
30  
Q
31  
R
32  
S
33  
T
34  
U
35  
V
36  
W
37  
38  
39  
40  
AA BB CC DD  
41  
42  
43  
44  
45  
II  
46  
JJ  
47  
48  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
EE FF GG HH  
KK LL MM  
NN OO PP QQ RR SS TT UU VV  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
III  
69  
70  
71  
72  
MMM  
73  
74  
75  
76  
WW AAA BBB CCC DDD EEE FFF GGG HHH  
JJJ KKK LLL  
NNN OOO PPP QQQ  
77  
78  
79  
80  
81  
82  
83  
84  
85  
86  
86  
87  
87  
88  
88  
89  
89  
90  
90  
91  
91  
92  
92  
93  
93  
94  
94  
RRR SSS TTT UUU VVV WWW XXX YYY ZZZ  
95  
96  
97  
98  
99 100 101 102 103  
104 105 106 107 108 109 110 111 112  
104 105 106 107 108 109 110 111 112  
A-5 A-4 A-3 A-2 A-1 100 101 102 103  
113 114 115 116 117 118 119 120 121  
113 114 115 116 117 118 119 120 121  
122 123 124 125 01  
122 123 124 125 5A  
17  
5E80301A S (12-17)  
17  
22/01/2003, 22:35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Para menorizer canales  
SINTONIZACION DE MEMORIA AUTOMATICA DE CANAL  
Presione TV MENU en el mode de TV.  
Aparece la pantalla del menú de la TV.  
1
2
Presione  
ó
hasta que  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
aparezca el menú SETUP.  
/
/
/
/MENU  
<
>
Presione  
ó
para seleccionar  
el modo AUTO CH MEMORY, a  
continuación presione . El  
3
ó
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
TV comenzará a memorizar todos  
los canales disponibles en su área.  
/
/
/
/MENU  
<
>
Presione TV MENU hasta que se  
borre la pantalla MENU.  
4
PARA ADICIONAR/BORRAR CANALES  
Seleccione los canales deseados a  
agregar o borrado mediante  
Selección directa de canal (0-  
1
9) o CH  
ó
.
Presione TV MENU. Aparece la  
pantalla del menú de la TV.  
2
3
Presione  
ó
hasta que  
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
aparezca el menú SETUP.  
/
/
/
/MENU  
<
>
Presione  
el modo ADD/DELETE.  
ó
para seleccionar  
4
5
TV/CATV  
ADD/DELETE  
AUTO CH MEMORY  
CATV  
ADD  
/
/
/
/MENU  
<
>
Presione  
ó
para seleccionar  
ADD (añadir) ó DELETE (borrar),  
dependiendo de la función que  
quiera realizar.  
TV/CATV  
CATV  
ADD/DELETE  
DELETE  
AUTO CH MEMORY  
/
/
/
/MENU  
<
>
Presione TV MENU hasta que se  
borre la pantalla MENU.  
6
7
Repita los pasos 1 y 6 para ser  
añadido o borrado cada canal.  
18  
5E80301A S (18-23)  
18  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Seleccion Chip-V  
Se puede ajustar una prohibición para impedir que los niños puedan ver y escuchar escenas violentas  
o películas aptas sólo para adultos, etc. El TV/DVD puede seleccionar “TV RATING” y “MOVIE RATING”.  
Para utilizar la función de V-Chip, registre primero una contraseña.  
PARA REGISTRE CONTRASEÑA  
Presione TV MENU en el mode de TV.  
1
Aparece la pantalla del menú de la TV.  
Presionar  
aparezca el menú OPTION.  
ó
hasta que  
2
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Presione  
seleccionar la V-CHIP SET la  
continuación presione  
ó
para  
3
ó
.
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
/
/
/
/MENU  
<
>
Entre la contraseña (4 cifras) con  
selección directa de canal (0-9)  
y presione ENTER.  
• Si introduce un número  
incorrecto, presione CANCEL.  
4
5
V-CHIP SET  
NEW  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
Aparece “ ” en lugar del número.  
Entre nuevamente la misma  
contraseña para la seguridad y  
presione ENTER.  
La contraseña es registrada y el  
menú de ajuste V-Chip  
aparecerá en el despliegue.  
V-CHIP SET  
CONFIRM  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
NOTAS:  
Si se olvida de la contraseña, no  
podrá ajustar el V-Chip.  
Para no olvidarse de la contraseña,  
anótela y guárdela en un lugar  
seguro.  
19  
5E80301A S (18-23)  
19  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Seleccion Chip-V  
PARA AJUSTAR EL V-CHIP  
En el menú V-CHIP SET,  
1
presione  
ó
para  
seleccionar TV RATING.  
Presione  
ó
para que  
aparezca el ajuste deseado.  
OFF No se ajusta a TV RATING  
2
:
TV-Y : Todos los niños  
TV-Y7 : 7 años ó mayor  
TV-G : Audiencia general  
TV-PG: Con autorización de los padres  
TV-14 : 14 años ó mayor  
TV-MA: 17 años ó mayor  
• Cuando seleccione TV- Y7, TV-PG, TV-14 ó TV-MA,  
presione DISPLAY/CALL para mostrar el nivel de  
prohibición. Presione  
clasificación deseada.  
/
ó
/
para seleccionar la  
Presione  
ó
para  
3 seleccionar MOVIE RATING.  
Presione  
ó
para seleccionar  
4 prohibición deseada.  
OFF  
:
No se ajusta a MOVIE  
RATING  
G
PG  
:
:
Para autorización de los padre  
Con autorización de padres  
PG-13 : Con autorización de padres  
Menos de 13 años  
R
:
Menores de 17 años se recomienda  
Se seguire autorizaciós de los padres  
NC17 : 17 años ó mayor  
Sólo para adultos  
X
:
Presione  
ó
para  
5 seleccionar V-CHIP.  
Para utilizar el televisor después de  
proteger el TV.  
Cuando se reciba un programa al que  
se aplica el ajuste del V-Chip,  
introduzca la contraseña.  
Presione  
ó
para que  
6
aparezca ON. Sus ajustes  
quedan grabados en la  
memoria.  
La protección puede cancelarse.  
NOTA:  
Presione TV MENU hasta que se  
7 borre la pantalla MENU.  
La función V-Chip se activa sólo en  
los programas y cintas que tienen  
señal de prohibición.  
20  
5E80301A S (18-23)  
20  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Seleccion Chip-V  
PARA CAMBIAR LA CONTRASEÑA  
Presione TV MENU en el mode de TV.  
Aparece la pantalla del menú de la TV.  
1
2
Presione  
ó
hasta que  
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
aparezca el menú OPTION.  
/
/
/
/MENU  
<
>
Presione  
ó
para  
seleccionar el V-CHIP SET, a  
continuación presione  
3
V-CHIP SET  
LANGUAGE/IDIOMA/LANGUE  
ó
.
/
/
/
/MENU  
<
>
Entre la contraseña (4 cifras)  
con selección directa de canal  
(0-9) y presione ENTER.  
• Si introduce un número  
incorrecto, presione CANCEL.  
4
5
6
V-CHIP SET  
PASSWORD  
:
0
9/ENTER/CANCEL/MENU  
<
>
Presione  
ó
para  
seleccionar el CHANGE  
PASSWORD, a continuación  
presione  
ó
.
Entre la contraseña nueva (4  
cifras) con selección directa de  
canal (0-9) y presione ENTER.  
Registre nuevamente la  
contraseña para confirmar, luego  
presione ENTER.  
7
8
Presione repetidamente TV  
MENU para volver a la pantalla  
normal.  
21  
5E80301A S (18-23)  
21  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ajustes de cotrol de imagen  
Los controles de imagen han sido preajustados en fábrica, pero usted puede reajustarlos individualmente como sigue:  
Presione TV MENU en el mode de TV.  
Aparece la pantalla del menú de la TV.  
1
Presione  
aparezca el menú PICTURE.  
ó
hasta que  
2
BRIGHTNESS  
CONTRAST  
COLOR  
0
+32  
0
TINT  
0
SHARPNESS  
0
/
/
/
/MENU  
<
<
>
Presione  
para seleccionar el punto que  
desea ajustar.  
ó
repetidamente  
3
BRIGHTNESS  
CONTRAST  
COLOR  
TINT  
SHARPNESS  
0
+32  
0
0
0
/
/
/
/CANCEL/MENU  
>
Presione  
hacer el ajuste.  
ó
dos veces para  
4
BRIGHTNESS  
(BRILLO)  
aumenta el brillo  
disminuye el brillo  
disminuye el contraste  
tiene un color pálido  
color rojizo  
CONTRAST  
(CONTRASTE)  
aumenta el contraste  
color brillante  
COLOR  
(COLOR)  
TINT  
(TINTE)  
color hacia el verde  
le imagen es más nítida  
SHARPNESS  
(NITIDEZ)  
le imagen es más suave  
Después de encontrar el ajuste  
5 deseado presionar TV MENU  
hasta que desaparezca la  
pantalla de MENU.  
REPOSICION  
Al presionar CANCEL durante los  
ajustes de imagen hará que los  
mismos regresen a los niveles  
preajustados en fábrica.  
NOTA:  
La función contraste se prejusta en  
fábrica máximo nivel.  
22  
5E80301A S (18-23)  
22  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programa de audio saparado (SAP) y estereo  
El aparato de TV/DVD está equipado con una función conocida como sonido de TV multicanal o MTS. Las  
transmisiones MTS permiten disfrutar mejor de la TV ya que sus programas tienen un sonido en estéreo de alta  
fidelidad. MTS también tiene un canal adicional llamado programa de audio separado o SAP que los canales de TV  
pueden utilizar para transmitir un segundo idioma en las transmisiones bilingües o para otros propósitos.  
PARA ESCUCHAR SONIDOS EN ESTEREO  
Cuando el aparato de TV está  
encendido o se hace una selección  
STEREO  
CH 013  
de canal, asegúrese de que aparece  
"STEREO" en la pantalla. Esto  
significa que se pueden recibir  
transmisiones en "Estéreo". Puede  
disfrutar de los sonidos en estéreo  
utilizando las altavoces izquierdo y  
derecho.  
• Cuando se reciben transmisiones  
"Monoaural" no aparece ninguna  
indicación.  
• Si la señal transmisora no es lo  
suficientemente fuerte o no puede  
escuchar nítidamente los sonidos  
en estéreo, presione AUDIO para  
cambiar a un sonido monoaural.  
Con este deberán eliminarse los  
ruidos. Presione nuevamente para  
escuchar los sonidos en estéreo.  
PARA ESCUCHAR EN SAP (PROGRAMA DE AUDIO SEPARADO)  
Cuando el aparato de TV está  
encendido o se hace una  
selección de canal, asegúrese  
STEREO SAP  
CH 013  
de que aparece SAP en la  
pantalla. Esto significa que se  
puede recibir transmisiones en  
"Programa de audio separado".  
PARA SELECCIONAR SONIDO DESEADO  
Presione AUDIO para  
seleccionar el sonido deseado.  
SEL. STEREO  
TRANSMISION MONOAURAL+SAP  
SONIDO  
SONIDO MONOAURAL  
(PRINCIPAL)  
SONIDO  
SEPARADO  
MONOAURAL+SEPARADO  
(PRINCIPAL)  
TRANSMISION ESTEREO+SAP  
SONIDO ESTEREO  
(PRINCIPAL)  
SONIDO SEPARADO  
SONIDO  
MONOAURAL +SEPARADO  
(PRINCIPAL)  
SONIDO MONOAURAL  
(PRINCIPAL )  
23  
5E80301A S (18-23)  
23  
22/01/2003, 21:51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disco  
Acerca de este manual de usuario Discos reproducibles  
Este manual de usuario explica las instrucciones  
básicas de este TV/DVD. Algunos discos de vídeo DVD  
se producen de forma que permiten un funcionamiento  
específico o limitado durante su reproducción. Por este  
motivo, puede que el TV/DVD no responda a todos los  
comandos de funcionamiento. Esto no constituye un  
defecto del TV/DVD. Consulte las notas de instrucciones  
de los discos.  
Este TV/DVD puede reproducir los siguientes discos.  
Marca del  
disco  
Tiempo de repro-  
ducción máximo  
Tamaño  
del disco  
Contenido  
Aprox. 4 horas  
(disco de una  
sola cara)  
12 cm  
8 cm  
Aprox. 8 horas  
(disco de una  
sola cara)  
Audio +  
Vídeo  
(imágenes  
en  
Discos  
de vídeo  
DVD  
” puede aparecer en la pantalla de la TV durante el  
Aprox. 80  
minutos (disco  
de una sola cara)  
funcionamiento. A “ ” significa que el funcionamiento  
no está permitido por el TV/DVD o el disco en este  
momento.  
Por ejemplo, no puede omitir la reproducción del  
mensaje de derechos de autor del disco cuando se  
movimiento)  
Aprox. 160  
minutos (disco de  
doble cara)  
presiona el botón SKIP(  
puede indicar que la función no está disponible para el  
disco.  
). El símbolo “ ” también  
12 cm Aprox. 74 minutos  
8 cm  
Audio  
CDs de  
audio  
(CD  
Aprox. 20 minutos  
Notas sobre números de región  
single)  
El número de región de este TV/DVD es 1. Si los  
números de región, que indican el área geográfica en la  
que se pueden reproducir, están impresos en su disco  
También se dispone de los siguientes discos.  
CD-R  
CD-RW  
Se pueden reproducir los discos CD-R/RW grabados  
mediante el método CD-DA. Algunos discos CD-R/RW  
pueden ser incompatibles.  
ALL  
1
de vídeo DVD y no encuentra  
o
, el reproductor  
no admite el disco y no puede reproducirlo. (En este  
caso, el TV/DVD muestra un mensaje en pantalla.)  
You cannot play discs other than those listed above.  
You cannot play discs of VIDEO-CD, DVD-RAM, DVD-RW,  
etc., or non standardized discs even if they may be labeled  
as above.  
• ThisTV/DVD uses the NTSC color system, and cannot play  
DVD video discs recorded in any other color system (PAL,  
SECAM, etc.).  
Tr  
24  
5E80301A S (24-29)  
24  
22/01/2003, 21:52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparación / estado del disco  
En las siguientes páginas se describe  
la instalación y la operación en modo  
DVD.  
Preparación  
Antes de poner en funcionamiento el DVD/CD, efectúe las  
siguientes preparaciones.  
Introduzca el cable de CA en una toma de corriente  
1
estándar de CA polarizada de 120 V y 60 Hz.  
• Si el cable de CA se enchufa por vez primera, espere  
unos 5 segundos antes de presionar POWER.  
NOTA: Al conectar a otros equipos, desenchufe la unidad  
de la toma de CA.  
Presione POWER en la unidad o en el mando a distancia  
para encender la unidad. Se encenderá el indicador  
POWER.  
2
• Cada vez que presiona POWER, el TV/DVD se enciende  
desde el modo TV.  
• Cuando use un amplificador,  
enciéndalo.  
Presione TV/DVD para  
3
seleccionar el modo DVD.  
Aparecerá la pantalla de inicio  
del DVD.  
Pantalla de estado del disco  
Presione DISPLAY/CALL. Aparecerá la pantalla de estado del  
disco.  
Disco de vídeo DVD  
DVD  
Número del título  
Número del capítulo  
Tiempo transcurrido de reproducción del título  
Tiempo total del título  
Funcionamiento  
del disco  
1/8  
C
1/19  
T
0:07:18 2:02:31  
1/8 Eng 1/1  
Ángulo de la cámara  
1/8 Eng DolbyDigital  
Idioma de los subtítulos  
Idioma del sonido  
Un tipo de sonido  
Para que desaparezca la pantalla de estado, presione  
DISPLAY/CALL de nuevo.  
NOTA:  
Si la unidad no funciona  
correctamente:  
La electricidad estática, etc., puede  
afectar al funcionamiento del  
reproductor. Desconecte el cable de CA  
y vuelva a conectarlo.  
CD de AUDIO  
Tiempo transcurrido de reproducción de la pista  
Funcionamiento  
del disco  
Tiempo total de la  
pista  
Número de la pista  
Lista de  
reproducción  
• Cuando reproduzca el disco CD, aparecerá la pantalla de  
estado.  
25  
5E80301A S (24-29)  
25  
22/01/2003, 21:52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Procedimiento de reproducción  
Presione OPEN/CLOSE  
1
en el aparato.  
Se abrirá la bandeja del  
disco.  
Coloque un disco en la  
bandeja. Sujete el disco,  
colóquelo con el lado de  
etiqueta impresa hacia  
arriba, alinee en las guía y  
coloque el disco en su  
posición correcta.  
2
3
Presione PLAY u OPEN/  
CLOSE en el aparato.  
La bandeja del disco se  
cierra automáticamente.  
En la pantalla del TV la  
indicación “ ” cambia a  
y
empieza la  
reproducción.  
• Aparece la pantalla del  
menú en la pantalla de  
TV, si el disco tiene una  
función de menú.  
Nota:  
Si se coloca un disco no compatible,  
aparecerá “Incorrect Disc”, “Region Code  
Error” o “Parentol Error” en la pantalla de  
TV dependiendo del tipo de disco cargado.  
En este caso, revisar el disco nuevamente  
(Ver páginas 24 y 36).  
Algunos discos pueden demorar un minuto  
antes de empezar la reproducción.  
Cuando coloque un disco de una sola cara  
con esa etiquetq abajo (i.e. del lado  
incorrecto) y presione PLAY o OPEN/  
Presione  
/
ó
/
para seleccionar el título.  
4
5
Presione SELECT.  
• Se selecciona el título y empieza la reproducción.  
CLOSE en el aparato, aparecerá “  
” en  
la pantalla durante 3 segundos y después  
aparecerá continuamente la palabra “No  
Disc”.  
Presione STOP para terminar la reproducción.  
• El aparato graba el punto de parada, según el disco.  
Aparece“ ” en la pantalla. (Presione PLAY para  
continuar reproduciendo (desde el mismo punto).  
• Si presiona nuevamente STOP o se retira el disco  
(Aparece “ ” en la pantalla), el aparato borrará el punto  
de parada.  
6
AlgunasfuncionesdereproduccióndeDVD  
puedenhabersidoelegidasporelproductor  
de la película. Como este aparato repro-  
duce los DVD de acuerdo con las  
posibilidades introducidas por el productor,  
algunasfuncionesdereproducciónpueden  
no existir. Consulte además las  
instrucciones que vienen con el DVD.  
Cuando toque CD’s de audio codificados  
DTS, se escuchará ruido excesivo de las  
salidas análogas stereo. Para evitar  
posibles daños al sistema de audio, el  
consumidor debe tomar las debidas  
precauciones cuando las salidas análogas  
stereo del aparato DVD estén conectadas  
a un sistema de amplificación.  
Para la reproducción, presione STOP.  
A continuación presione OPEN/CLOSE en el aparato.  
Se abre la bandeja del disco.  
Saque el disco y presione OPEN/CLOSE en el aparato y  
presione POWER.  
7
La bandeja del disco se cierra automáticamente y se  
desconecta el aparato.  
26  
5E80301A S (24-29)  
26  
22/01/2003, 21:52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reproducción especial  
Nota: Puede ocurrir una leve demora  
entre el momento en que presiona el  
botón y que se active la función.  
Reproducción con avance rápido  
Presione SEARCH ( ) durante la reproducción normal.  
CadavezquepresioneelbotóndeSEARCH(  
),aumentará  
(x4), (x8),  
la velocidad de la búsqueda  
(x15).  
(x2),  
(CD:  
(x 2),  
(x 4),  
(x 8),  
(x 20))  
• Para seguir con la reproducción normal, presione PLAY.  
Reproducción con retroceso rápido  
Presione SEARCH (  
) durante la reproducción normal.  
CadavezquepresioneelbotóndeSEARCH(  
),aumentará  
la velocidad de la búsqueda  
(x15).  
(x2),  
(x4), (x8),  
(CD:  
(x 2),  
(x 4),  
(x 8),  
(x 20))  
• Para seguir con la reproducción normal, presione PLAY.  
Reproducción Fija  
Presione PAUSE/STILL  
durante la reproducción  
normal para hacer una pausa  
en la reproducción.  
Para seguir con la  
reproducción normal,  
presione PLAY.  
Avance cuadro por cuadro  
Presione PAUSE/STILL durante la imagen fija.  
Avanza un cuadro cuando presione PAUSE/STILL una vez.  
Para seguir con la reproducción normal, presione PLAY.  
Reproducción de cámara lenta  
Presione SLOW ( ) para retroceder o SLOW ( ) para  
avanzar durante la reproducción normal o imagen fija.  
Cada vez que presione el botón de SLOW, cambiará la  
velocidad del slow x1/2, x1/4, x1/6, x1/8.  
Nota:  
• Para seguir con la reproducción normal, presione PLAY.  
El aparato puede mantener una imagen  
fija de video o la imagen visualizada en  
la pantalla, en su pantalla de TV,  
permanentemente. Si deja la imagen  
fija de video o la imagen visualizada en  
la pantalla en su TV durante mucho  
tiempo, puede dañar permanentemente  
la pantalla de TV. Los televisores de  
proyección tienen tendencia a sufrir  
este problema.  
• Para volver a la imagen fija, presione PAUSE/STILL.  
Búsqueda de un capítulo o canción  
Presione SKIP (7) en avance o SKIP (6) en retroceso  
durante la reproducción para buscar un capítulo que desea  
ver. Cada vez que presione el botón, se salta un capítulo o  
canción.  
27  
5E80301A S (24-29)  
27  
22/01/2003, 21:52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Zoom/Búsqueda de la escena deseada  
Zooming (acercamiento)  
Estaunidadlepermitiráhaceracercamientosdelaimagen  
del marco y podrá efectuar selecciones cambiando la  
posición del marco.  
Presione TV/DVD para  
seleccionar mode de  
DVD.  
1
1
Presione ZOOM durante  
la reproducción.  
La parte central de la  
imagen se agranda.  
Cada vez que presione el  
ZOOM cambiará el ZOOM  
1 (x2),  
(x4).  
2 (x3) y  
3
Presioneelbotón  
del marco. Puede mover el marco del centro hacia UP  
(arriba),DOWN(abajo),LEFT(izquierda),RIGHT(derecha).  
/
/
/
paraverunapartediferente  
2
3
En el modo ZOOM presione ZOOM varias veces para  
regresar a una visión 1:1 (  
Off).  
Búsqueda de la escena deseada  
Utilice el título, capítulo y tiempo grabados en el disco  
para buscar el punto que desea reproducir.  
Presione JUMP durante  
la reproducción.  
1
Jump  
C
_ _ / 19  
1 / 8  
2:02:31 / 2:02:31  
T
/Enter/0 9/Cancel/Jump  
2 Presione  
ó
para seleccionar el “  
C
(capítulo)”, “  
T
(tiempo/canción)” ó “  
(título)”.  
Presione las teclas numéricas (0-9) para cambiar el  
número.  
3
Nota:  
• Si entra un número equivocado, presione CANCEL.  
• Consulte la caja en la que viene el disco para  
confirmar los números.  
• Puede seleccionar la reproducción con  
pausa, cámara lenta o búsqueda en el  
modo zoom.  
• Puede que algunos discos no  
respondan a la función de Zoom.  
Presione ENTER.  
4
• Empieza la reproducción.  
• Cuando cambie el título, empieza a reproducir desde el  
capítulo 1 del título seleccionado.  
• Este procedimiento puede no funcionar en algunos  
discos.  
28  
5E80301A S (24-29)  
28  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reproducción repetida/Reproducción de programa/Repetida A-B  
Presione PLAY MODE durante el modo de reproducción o el de parada.  
Cada vez que presione PLAY MODE, el modo de reproducción cambia de la siguiente forma.  
CD de AUDIO  
DVD  
Presentación  
en pantalla  
Presentación  
en pantalla  
Operación  
Repite el título actual.  
Operación  
Repite todo el disco.  
Título:  
All:  
Pista:  
Repite la pista actual.  
Capítulo: Repite el capítulo actual.  
Off:  
Reproducción  
aleatoria:  
Vuelve a la reproducción normal.  
Reproduce las pistas en orden  
aleatorio.  
• Durante el modo de parada, la tecla PLAY MODE no  
funciona.  
*Programa:  
Reproduce las pistas en orden de  
programa.  
(Pantalla de  
estado):  
Vuelve a la reproducción normal.  
• Durante el modo de parada, no puede seleccionar  
Pista”.  
*Menú de programa  
Program  
Use los botones numéricos  
(0–9) para escribir el número de  
la pista que desea programar, y a  
continuación presione ENTER.  
Se muestran el número de la  
pista y el tiempo total. Repita este  
paso para introducir pistas  
1
2
3
4
5
8
8:29  
8:54  
7:31  
3
__  
Total 3 0:25:14  
/Enter/0 9/Cancel/Play/PlayMode  
adicionales. Cuando haya  
terminado de introducir pistas,  
presione PLAY para empezar la  
reproducción de programa. Se  
muestra una lista de reproducción  
de sus pistas programadas.  
NOTAS:  
• Si introduce un número incorrecto, presione CANCEL.  
• Para cancelar la reproducción de programa, presione STOP 3 veces.  
• Para borrar los programas del menú de programas, presione CANCEL hasta  
que se borren todos los programas.  
• El programa se cancela cuando abre la bandeja del disco o apaga el aparato.  
Reproducción repetida A-B  
La reproducción repetida A-B le permite repetir el material entre los dos puntos seleccionados.  
A
Presione REPEAT A-B durante la reproducción.  
Se selecciona el punto inicial.  
1
2
Presione nuevamente REPEAT A-B. Se selecciona el punto final. Empieza a  
reproducir en el punto seleccionado. La reproducción se detiene en el punto  
final, vuelve al punto A y vuelve a empezar nuevamente.  
A
B
Para continuar con la reproducción normal, presione nuevamente REPEAT A-B. Aparece “  
” en la pantalla.  
Off  
Nota:  
• La función de repetición puede no funcionar en algunos discos.  
• En el modo de repetición A-B pueden no aparecer los subtítulos cerca del punto A o B.  
• Puede no ser posible programar la repetición A-B en algunas escenas del DVD.  
• La repetición A-B no funciona con un DVD interactivo.  
29  
5E80301A S (24-29)  
29  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Marcado de escenas deseadas  
El TV/DVD almacena los puntos que  
usteddeseeverdenuevo.Puedevolver  
ainiciarlareproducciónapartirdeesa  
escena.  
Marcado de escenas  
Presione MARKER  
1
T
T
T
C
C
C
durante la reproducción.  
Seleccione el marcador  
2
en blanco usando  
/
,
T
T
T
C
C
C
y a continuación presione  
ENTER en la escena  
deseada.  
• Se pueden seleccionar  
hasta 3 escenas.  
• Repita el mismo  
procedimiento para establecer las otras 2 escenas.  
Presione MARKER para eliminar esta pantalla.  
3
Para volver a las escenas  
Presione MARKER  
1
durante el modo de  
reproducción o el de  
parada.  
T
T
T
C
C
C
Presione  
seleccionar el marcador  
1-3.  
o
para  
2
3
T
T
T
C
C
C
Presione SELECT.  
La reproducción comienza a partir de la escena marcada.  
NOTAS:  
Para cancelar la marca  
La marca se cancela cuando abre la  
bandeja del disco o apaga el aparato.  
Algunos subtítulos grabados alrededor  
del marcador puede que no aparezcan.  
[DVD]  
Presione MARKER .  
1
2
3
Presione  
o
para seleccionar el marcador 1-3.  
Presione CANCEL  
.
30  
5E80301A S (30-31)  
30  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cambio del idioma de la pista de sonido/Subtítulos  
Cambio del idioma de la pista de sonido  
Se puede seleccionar el idioma cuando reproduce un  
disco en múltiples idiomas.  
Presione AUDIO durante  
la reproducción.  
1
2/8 Fra Dolby Digital  
Apareceráelidiomaactual  
de la pista de sonido.  
Presione AUDIO hasta  
que quede seleccionado  
el idioma deseado.  
2
1/8 Eng Dolby Digital  
El despliegue en pantalla  
desaparecerá después de  
unos cuantos segundos.  
En caso de reproducción de video CD  
El tipo de sonido cambia del modo siguiente cada vez que se  
presiona AUDIO.  
LR  
L
R
Subtítulos  
Nota:  
• Si no se escucha el idioma deseado  
después de presionar el botón varias  
veces, el idioma no fue grabado en el  
disco.  
Aparición y desaparición de subtítulos  
Cuando reproduzca un disco con subtítulos grabados,  
puede hacer que éstos aparezcan o desaparezcan.  
• El cambio del idioma en la pista de  
sonido se cancela cuando abra la  
bandeja del disco o desconecte el  
aparato apague el aparato. El idioma  
por omisión inicial o idioma existente  
volverá a escucharse cuando vuelva a  
reproducir el disco.  
• El cambio del idioma de los subtítulos  
se cancela cuando abre la bandeja del  
disco o apaga el aparato.  
Presione SUB TITLE durante  
la reproducción hasta que  
aparezca "Off".  
Off  
Cambio del idioma de los subtítulos  
Puede seleccionar el idioma para reproducir un disco  
grabado con subtítulos en múltiples idiomas.  
• Puede que algunas funciones no  
funcionen en algunos DVD. Quizá no  
pueda activar o desactivar los subtítulos  
ni cambiarlos. Al reproducir el DVD, el  
subtítulo puede cambiar cuando:  
- abre o cierra la bandeja del disco  
- cambia el título.  
Presione SUB TITLE  
durante la reproducción  
hasta que aparezca el  
idioma deseado.  
1/32 Eng  
1
• En algunos caso, el idioma de los  
subtítulos no cambia inmediatamente  
al seleccionado.  
El despliegue en pantalla desaparecerá después de unos  
cuantos segundos.  
2
31  
5E80301A S (30-31)  
31  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cambio de ángulos/ Selección de título/ Menú DVD  
Cambio de ángulos  
Cuando reproduce un disco grabado en múltiples  
ángulos, puede cambiar el ángulo de visión de la  
escena.  
Presione ANGLE durante  
la reproducción.  
1
1/9  
Aparecerá el angle actual.  
Presione ANGLE varias veces hasta que seleccione el  
angle deseado.  
2
Selección de título  
Hay dos o más títulos grabados en algunos discos. Si  
se ha grabado el menú de título en el disco, puede  
seleccionar el título deseado.  
Presione TITLE durante la reproducción.  
Aparece el menú de título en la pantalla.  
1
Presione  
2 deseado.  
/
ó
/
para seleccionar el título  
Presione ENTER o PLAY.  
Empieza la reproducción del título seleccionado.  
3
Menú DVD  
Algunos DVD permiten seleccionar el contenido del  
disco con el menú.  
Cuando reproduce este tipo de DVD, puede seleccionar  
el idioma de los subtítulos, idioma de la pista de sonido,  
etc. con el menú DVD.  
Presione DVD MENU durante la reproducción.  
Aparece el menú DVD en la pantalla.  
1
• Presione nuevamente DVD MENU para volver a  
reproducir la escena en la que se estaba  
Notas:  
reproduciendo cuando presionó el botón DVD MENU.  
• En algunos DVD, puede no ser posible  
cambiar los ángulos incluso cuando se  
grabó en múltiples ángulos en el DVD.  
• En algunos DVD puede nos ser posible  
seleccionar el título. En algunos DVD el  
“menú de título” puede tener el nombre  
de “menú” o de “título” en las  
Presione  
/
ó
/
para seleccionar el ítem deseado.  
2
3
Presione ENTER.  
El menú continúa en otra pantalla. Repita los pasos 2 y  
3 para terminar de seleccionar el ítem completamente.  
instrucciones que vienen con el disco.  
32  
5E80301A S (32-39)  
32  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selección del idioma  
Puede cambiar los parámetros  
predeterminados para personalizar el  
funcionamiento como prefiera.  
Presione TV/DVD para  
1
2
3
Main Menu  
seleccionar el modo DVD.  
Presione SETUP en el  
modo de parada.  
Language  
Picture  
Sound  
Presione  
o
para  
Parental  
seleccionar “Language”, y  
a continuación presione  
o ENTER.  
/Enter/Setup/Return  
Presione  
o
para  
seleccionar “OSD  
Language”, y a  
continuación presione  
o ENTER.  
Presione  
o
para  
OSD Language  
seleccionar el idioma  
deseado (por ejemplo  
Spanish), y a continuación  
presione ENTER.  
English  
Francais  
Espanol  
El menú vuelve al menú  
"Language"  
/Enter/Setup/Return  
automáticamente.  
• Si desea volver al menú anterior, presione  
o RETURN.  
Repita los pasos 2-3 para otros ajustes de "Language".  
4
5
Otra selección: (Menu/Audio/Subtitle)  
Si desea seleccionar otro idioma, introduzca el código del  
idioma (véase la lista de códigos de idioma de la página  
39).  
Off: (subtítulo)  
Los subtítulos no aparecen.  
Presione SETUP para eliminar la pantalla Menú.  
NOTAS:  
• Si el idioma seleccionado para la banda  
sonora no está grabado en el disco, se  
reproduce el idioma original.  
• Si el idioma seleccionado para los  
subtítulos no está grabado en el disco,  
se selecciona el idioma prioritario.  
33  
5E80301A S (32-39)  
33  
22/01/2003, 21:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ajuste del formato (relación de aspecto) de la pantalla de la  
TV/ Ajuste de la visualización en pantalla  
Ajuste del formato (relación de aspecto) de  
la pantalla de la TV  
Puede seleccionar el formato de su TV.  
Presione TV/DVD  
para  
Main Menu  
Language  
1
seleccionar el modo DVD.  
Presione SETUP en el modo  
de parada o No Disc.  
Picture  
Sound  
Presione  
o
para  
Parental  
seleccionar “Picture”, y a  
continuación presione  
ENTER.  
o
/Enter/Setup/Return  
Presione  
seleccionar “TV Screen”, y a  
continuación presione  
ENTER.  
o
para  
2
3
o
Presione  
o
para  
TV Screen  
seleccionar el tipo de pantalla  
deseada, y a continuación  
presione ENTER.  
16:9  
4:3  
4:3  
Puede elegir entre los siguientes tamaños de pantalla:  
16:9 Pantalla ancha  
Seleccione este modo al conectar a un TV de pantalla ancha. Se  
muestra una imagen en pantalla ancha a toda pantalla.  
4:3  
Letterbox  
Seleccione este modo al conectar a un TV convencional. Al  
reproducir un disco DVD para pantalla ancha, presenta la imagen  
ocupando toda la anchura del TV, con bandas negras en la parte  
superior e inferior de la imagen.  
4:3  
Panscan  
Presenta la imagen ocupando toda la pantalla, y recortando  
automáticamente los extremos izquierdo y derecho.  
• Si desea volver al menú anterior, presione  
o RETURN.  
Presione SETUP para eliminar la pantalla Menú.  
4
Visualización del estado en pantalla  
La visualización del estado en pantalla se puede activar o  
desactivar con los botones.  
Presione SETUP en el modo de parada o No Disc.  
1
Presione  
o
para seleccionar “Picture”, y a continuación  
presione  
o ENTER.  
Presione  
seleccionar “Display”.  
o
para  
2
3
Picture  
TV Screen  
Display  
16:9  
On  
NOTA:  
Si el disco DVD no está formateado en el estilo  
"pan & scan", muestra el estilo 4:3.  
Presione  
seleccionar "On" u "Off".  
o ENTER para  
Picture  
TV Screen  
Display  
16:9  
Off  
On:  
Off:  
La visualización en pantalla aparece cuando se pulsan  
los botones (ajuste de fábrica).  
La visualización en pantalla no aparece cuando se pulsa  
o cualquier botón.  
• Si desea volver al menú anterior, presione  
o RETURN.  
Presione SETUP para eliminar la pantalla Menú.  
4
34  
5E80301A S (32-39)  
34  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Control de Gama Dinámica  
ElDRC(ControldeGamaDinámica)le  
permite controlar la gama dinámica  
para lograr un sonido conveniente  
para su equipo.  
Presione TV/DVD para  
1
Main Menu  
Language  
seleccionar mode de TV.  
Presione SETUP en el  
modo de parada.  
Picture  
Sound  
Presione  
ó
para  
Parental  
seleccionar “Sound”.  
/Enter/Setup/Return  
Presione o ENTERpara  
seleccionar DRC.  
2
3
Sound  
DRC  
On  
/Enter/Setup/Return  
Presione oENTERpara  
seleccionar “On” o “Off”.  
Sound  
DRC  
Off  
/Enter/Setup/Return  
• Si desea volver al menú anterior, presione  
o
RETURN.  
Presione SETUP para retirar la pentalla de Menu.  
4
Notas:  
• DRC funciona sólo con la reproducción de  
grabaciones Dolby Digital.  
• El nivel de DRC puede variar según el disco  
de vídeo DVD.  
35  
5E80301A S (32-39)  
35  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ajuste de restricciones para menores  
Algunos discos no son apropiados  
para los niños. Estos discos pueden  
limitarse para no reproducirse con la  
unidad.  
Presione TV/DVD para seleccionar mode de DVD.  
1
Presione SETUP en el  
modo de parada.  
Main Menu  
Language  
Presione  
seleccionar “Parental” y  
presione  
Presione  
ó
para  
Picture  
Sound  
o ENTER.  
Parental  
o ENTER.  
/Enter/Setup/Return  
Presionar el botón  
para seleccionar  
restricción para menores  
y después presionar  
ENTER.  
ó
2
3
Parental  
Password  
Parental Level  
Off  
Off  
ó
/Enter/Setup/Return  
Presione  
seleccionar un nivel desde  
Off o 1–8. Presione  
o
para  
Parental Level  
Off  
1
o
ENTER para ajustar el  
nivel seleccionado.  
2
3
4
5
/Enter/Setup/Return  
• Nivel no: No funciona el ajuste de restricciones para  
menores.  
• Nivel 8: Se puede reproducir todo el DVD.  
• Nivel 1: El DVD para mayores no puede reproducirse.  
Seleccione entre el nivel 1 al nivel 8. La limitación será  
más severa conforme el número sea más bajo.  
Presione  
seleccionar “Password”, y a  
continuación presione  
ENTER.  
o
para  
4
Parental  
Password  
Parental Level  
Off  
1
o
Presione los botones  
numéricos (0-9) para  
introducir la contraseña.No  
olvide la contraseña.  
Si introduce un número  
incorrecto, presione  
5
Password  
Password  
1234  
Notas:  
Una vez completado cada ajuste  
(P.33-37), el aparato puede seguir  
funcionando en las mismas  
condiciones (especialmente con  
discos DVD).  
Cada ajuste puede mantenerse en la  
memoria aunque desconecte el  
aparato.  
CANCEL.  
Presione ENTER para  
guardar la contraseña.  
6
Parental  
Password  
Parental Level  
On  
1
Nota: Ahora la clasificación  
está bloqueada y el ajuste  
no puede cambiarse a  
menos que introduzca la  
contraseña correcta.  
• Paraalgunosdiscos,elapartonopuede  
prohibir la reproducción.  
• Algunos discos no puede codificarse  
con determinada información de nivel  
de prohibición aunque la etiqueta del  
disco diga “adulto”. Para estos discos  
no funcionará la prohibición para  
menores.  
Si desea volver al menú anterior, presione  
o RETURN.  
Presionar SETUP para retirar la pantalla de restricciones  
para menores.  
7
36  
5E80301A S (32-39)  
36  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cambio del nivel de restricciones para menores  
Presione TV/DVD para seleccionar mode de DVD.  
Presione SET UP en el modo de parada o no hay disco.  
1
Presione  
ó
para seleccionar Parental y presione  
o ENTER.  
Presione  
seleccionar “Password” y  
presione o ENTER.  
ó
para  
Parental  
2
3
Password  
Parental Level  
On  
1
Presionar los botones de  
los números (0-9) para  
introducir la contraseña  
que haya almacenado.  
Password  
Password  
____  
• Si introduce un número incorrecto, presione CANCEL.  
Presione ENTER.  
Estocancelalaprohibición.  
4
5
Parental  
Password  
Parental Level  
Off  
1
Presione  
seleccionar “Parental Level”  
y presione o ENTER.  
ó
para  
Parental  
Password  
Parental Level  
Off  
1
Se muestra la pantalla de  
Restricciones para menores.  
Presione  
seleccionar un nivel desde  
Off o 1-8 y a continuación  
o
para  
6
presione  
o ENTER.  
Presione  
seleccionar “Password” y  
presione o ENTER.  
ó
para  
Parental  
7
8
Password  
Parental Level  
Off  
8
Presionar  
ó
para  
Password  
Password  
seleccionar Password,  
después presionar los  
botones de los números  
(0-9) para introducir la  
contraseña.  
1234  
Nota: puede cambiar la contraseña si así lo desea.  
Nota:  
Noseolvidedelacontraseña.Siseolvida  
de la contraseña, hable con la tienda  
donde compró este aparato.  
Presione ENTER.  
Ahora el nivel de la  
restricción queda cambiado  
y fijo.  
Parental  
9
Password  
Parental Level  
On  
8
• Si desea volver al menú anterior, presione  
o
RETURN.  
Presionar SETUP o RETURN para retirar la pantalla de  
restricciones para menores.  
10  
37  
5E80301A S (32-39)  
37  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Deshabilitación temporal del nivel de rating (clasificación)  
del disco DVD  
Dependiendo del disco DVD, el disco  
puede tratar de cancelar temporalmente  
el nivel de rating que haya ajustado.  
Depende de usted si decide cancelar  
el nivel de la rating o no.  
Introduzca el disco DVD y  
presione PLAY.  
1
SieldiscoDVDfuediseñadoparacancelartemporalmente  
el nivel del Rating, cambiará la pantalla que aparece  
después del "Reading" (lectura) dependiendo del disco  
que se esté tocando. Si selecciona "YES" con el botón  
ENTER aparecerá la pantalla de "su disco excede el nivel  
de restricciones para menores".  
2
Your disc exceeds the parental control level.  
Password  
____  
Enter/0–9/Cancel/Return  
Si desea cancelar el nivel de clasificación ajustado  
temporalmente, introduzca la contraseña de 4 dígitos.  
A continuación, presione ENTER.  
Alternativamente, si no se ha establecido ninguna  
contraseña, comenzará la reproducción. Si desconoce (u  
olvidó) la contraseña, seleccione "STOP".  
3
4
La pantalla de ajuste desaparecerá. Presione OPEN/  
CLOSE para sacar el disco.  
Para salir, presione RETURN.  
La reproducción comenzará si se introdujo la contraseña  
correcta.  
Nota:  
Esta cancelación temporal del nivel del  
rating se mantendrá hasta que se saque el  
disco. Cuando se extraiga el disco se  
establecerá el nivel de rating original de  
manera automática.  
38  
5E80301A S (32-39)  
38  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Lista de códigos de idiomas  
Entre el número de código apropiado para los ajustes iniciales “AUDIO”, “SUBTITLE” y/o “MENU LAN-  
GUAGE” (consulte las páginas 33).  
Nombre de idioma Código Nombre de idioma Código Nombre de idioma Código Nombre de idioma Código  
Abkhazian  
Afar  
1112 Fiji  
1620 Lingala  
1619 Lithuanian  
1628 Macedonian  
1635 Malagasy  
1722 Malay  
2224 Singhalese 2919  
1111 Finnish  
1116 French  
2927 Frisian  
1123 Galician  
1128 Georgian  
1835 German  
1129 Greek  
1135 Greenlandic  
1136 Guarani  
1211 Gujarati  
1531 Hausa  
2230 Slovak  
2321 Slovenian  
2317 Somali  
2329 Spanish  
2921  
2922  
2925  
1529  
Afrikaans  
Albanian  
Amharic  
Arabic  
2111 Malayalam  
1415 Maltese  
1522 Maori  
2322 Sundanese 2931  
Armenian  
Assamese  
Aymara  
2330 Swahili  
2319 Swedish  
2328 Tagalog  
2325 Tajik  
2933  
2932  
3022  
3017  
3011  
3030  
3015  
3018  
1225  
3019  
3025  
3028  
3021  
3033  
3121  
3128  
3136  
2122 Marathi  
1724 Moldavian  
1731 Mongolian  
1811 Nauru  
Azerbaijani  
Bashkir  
2324 Tamil  
Basque  
2411 Tatar  
Bengali; Bangla 1224 Hebrew  
1933 Nepali  
2415 Telugu  
2425 Thai  
Bhutani  
Bihari  
1436 Hindi  
1819 Norwegian  
1831 Oriya  
1218 Hungarian  
1228 Icelandic  
1217 Indonesian  
2335 Interlingua  
1215 Irish  
2528 Tibetan  
2611 Tigrinya  
2629 Tonga  
1611 Turkish  
2622 Turkmen  
2630 Twi  
Breton  
1929 Panjabi  
1924 Pashto, Pushto  
1911 Persian  
1711 Polish  
Bulgarian  
Burmese  
Byelorussian  
Cambodian  
Catalan  
Chinese  
Corsican  
Croatian  
Czech  
2123 Italian  
1930 Portuguese  
2011 Quechua  
1311 Japanese  
3618 Javanese  
1325 Kannada  
1828 Kashmiri  
1329 Kazakh  
1411 Kirghiz  
2422 Korean  
1524 Kurdish  
1525 Laothian  
1530 Latin  
2731 Ukrainian  
2033 Rhaeto-Romance 2823 Urdu  
2124 Romanian  
2129 Russian  
2121 Samoan  
2135 Sanskrit  
2125 Scots Gaelic  
2131 Serbian  
2825 Uzbek  
2831 Vietnamese 3219  
2923 Volapük  
2911 Welsh  
1714 Wolof  
2928 Xhosa  
2918 Yiddish  
2924 Yoruba  
2914 Zulu  
3225  
1335  
3325  
3418  
2019  
3525  
3631  
Danish  
Dutch  
English  
Esperanto  
Estonian  
Faroese  
2225 Serbo-Croatian  
2211 Shona  
1625 Latvian, Lettish 2232 Sindhi  
39  
5E80301A S (32-39)  
39  
22/01/2003, 21:54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conexiones de toma Audio/Video  
La instalación exacta a utilizar para hacer las conexiones de los distintos componentes de video y audio en el  
TV depende del modelo y funciones de cada componente. Confirme en el manual de instrucciones de cada  
componente para la posición de las entradas y salidas de video y de audio.  
Utilización de un amplificador de audio  
Atrás del TV/DVD  
Amplificador  
A la entrada  
(der.) de audio  
A la entrada  
(izq.) de audio  
Salida de audio (izq.)  
Salida (der.) de audio  
Cable de AUDIO (no suministrado)  
Cómo utilizar un Amplificador AV con sonido digital integrado  
Si está utilizando un Amplificador con surround digital integrado, puede disfrutar de los distintos sistemas de  
audio, incluyendo el audio con Dolby Surround que hasta ahora sólo se podía disfrutar en los cines.  
A continuación se muestra cómo conectar un amplificador AV con decodificador Digital Dolby  
integrado, decodificador DTS, decodificador MPEG, etc.  
Altavoz  
delantero  
(derecho)  
Altavoz de  
subgraves  
Atrás del TV/DVD  
TV/DVD  
Altavoz  
delantero  
(izquierdo)  
Salida de audio  
digital coaxial  
Cable digital coaxial  
(no suministrado)  
Altavoz central  
A la entrada de  
audio digital coaxial  
Altavoz ambiental  
(izquierdo)  
Altavoz  
ambiental  
(derecho)  
Amplificador AV con decodificador de  
surround digital integrado como aparece  
arriba enlistado.  
Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo de la doble D son marcas registradas por  
Dobly Laboratories. Trabajos confidenciales no publicados. © 1992-1997 Dolby Laboratories, Inc. Todos los  
derechos reservados.  
*
*
"DTS" y "DTS Digital Out" son marcas registradas de Digital Theater Systems, Inc.  
NOTAS:  
Cuando haga las conexiones que se muestran arriba, no ajuste DOLBY DIGITAL a DOLBY DIGITAL, MPEG a MPEG con ON  
en el Amplificador AV. Si lo hace, saldrá repentinamente un ruido fuerte por los altavoces, afectando sus oídos o dañando los  
altavoces.  
Cuando escuche CD’s con codificación DTS, sólo escuchará ruido de las bocinas o de las salidas stereo análogas.  
Algunos decodificadores DTS que no soportan la interfase DVD-DTS tal vez no funcionen adecuadamente con la unidad.  
40  
5E80301A S (40-Back)  
40  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Conexiones de toma Audio/Video  
Cómo utilizar las entradas de audio/video  
Si conecta el TV/DVD a la videograbadora, cámara de video o juego de video, puede seleccionar presionando  
INPUT SELECT  
.
Presione repetidamente INPUT SELECT para seleccionar el modo deseado.  
Aparecerá "LINE1", "LINE2" o TV en la pantalla durante 4 segundos.  
LINE  
NOTA:  
TV Canale  
LINE 1  
(Atrás)  
LINE 2  
(Frente)  
Esta botón no funcionará en el  
modo DVD.  
1. Para conectar el TV/DVD a una videograbadora  
Presionar INPUT SELECT para seleccionar el modo deseado para utilizar la TV como monitor.  
Operar la videograbadora como siempre.  
VCR  
Ateás del TV/DVD  
A entrada de Video  
A salida de  
Audio/Video  
A entrada de Audio (der.)  
A entrada de Audio (izq.)  
2. Para conectar el TV a la videocámara  
Para reproducir de la videocámara, conecte la videocámara en el TV tal como se indica.  
Videocámara  
Frente del TV/DVD  
A entrada de Video  
VIDEIN  
AUDIO IN  
R
(MONO)  
A salida de Audio/Video  
A entrada de Audio (der.)  
A entrada de Audio (izq.)  
Cordon de Audio/Video (no está incluido)  
3. Para conectar el TV/DVD a un juego de TV.  
El TV/DVD puede utilizarse también como pantalla para muchos juegos de video. Sin embargo, debido a que  
existe una gran variedad de tipos diferentes de señales generadas por estos aparatos y diferentes requisitos de  
conexión correspondientes, no se han incluido todas las posibilidades posibles en los diagramas de conexión  
sugeridos. Para más detalles, deberá consultar el manual de instrucciones de cada componente.  
Frente del TV/DVD  
A entrada de Video  
JUEGO DE TV  
VIDEO IN  
L
AUDIO IN  
R
(MONO)  
A entrada de Audio (der.)  
A entrada de Audio (izq.)  
A salida de Audio/Video  
Cordon de Audio/Video (no está incluido)  
NOTAS:  
• También puede cambiar la pantalla de TV a LINE presionando INPUT SELECT. Pero esta pantalla es normal.  
• El TV/DVD también puede usarse como dispositivo de visualización para muchos videojuegos. Sin embargo, debido a  
la gran variedad de tipos de señal generados por estos aparatos y a las distintas variaciones de conexión requeridas,  
no se han incluido todos en los diagramas de conexión sugeridos. Si desea más información, consulte el Manual del  
usuario de cada componente.  
41  
5E80301A S (40-Back)  
41  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problemas y localización de averías  
Utilice la siguiente lista de verificación de localización de averías cuando tiene problemas con este aparato.  
Consulte con su concesionario local o tienda de servicio si continúan los problemas.  
Compruebe que se han hecho correctamente todas las conexiones cuando utilice con otros aparatos.  
SINTOMA  
POSIBLE SOLUCION  
Página  
ENERGIA  
Verifique que el cable de alimentación esté conectado.  
Pruebe con otro tomacorriente de CA.  
La alimentación está desconectada; revise el fusible o el  
El TV/DVD no funciona  
10  
interruptor automático.  
Desconecte la unidad, y vuelva a conectarla al cabo de una hora.  
RECEPCION DE PROGRAMAS DE TV  
La estación o el servicio de TV cable están con problemas;  
sintonice otra estación.  
Verifique los ajustes de volumen.  
Determine si hay posibles fuentes de interferencia.  
14  
Sonido de baja calidad o  
ausencia de sonido  
14  
44  
La estación o el servicio de TV cable están con problemas;  
sintonice otra estación.  
Revise las conexiones de la antena o sistema CATV; reorientela 11,12  
14  
Imagen de baja calidad o  
ausencia de imagen  
antena.  
Determine si hay posibles fuentes de interferencia.  
Verifique los ajustes de los controles de imagen.  
44  
22  
La estación o el servicio de TV cable están con problemas;  
sintonice otra estación.  
La señal de la estación es débil; reoriente la antena.  
Determine si hay posibles fuentes de interferencia.  
14  
Mala recepción en algunos  
canales  
11,12  
44  
La estación o el servicio de TV cable están con problemas;  
sintonice otra estación.  
14  
Verifique que haya canales almacenados en la memoria.  
Verifique los ajustes de los controles de imagen.  
18  
22  
Mala definición de los colores o  
ausencia de color  
Revise las conexiones de la antena o sistema CATV; reoriente 11,12  
la antena.  
Determine si hay posibles fuentes de interferencia.  
La estación o el servicio de TV cable están con problemas;  
sintonice otra estación.  
Verifique que haya canales almacenados en la memoria.  
El servicio CATV está transmitiendo una señal codificada.  
Reoriente la antena.  
44  
14  
18  
La imagen presenta oscilación o  
desplazamiento  
11  
Revise todas las conexiones del sistema CATV.  
Ajuste la opción de menú de TV/CATV al modo CATV.  
La estación o el servicio de TV cable están con problemas;  
pruebe con otra estación.  
12  
17  
14  
La recepción CATV no es posible  
Aparecen barras horizontales o  
verticales en la pantalla  
Revise las conexiones de la antena y reoriente la antena.  
Determine si hay posibles fuentes de interferencia.  
11,12  
44  
Asegúrese de que la opción de menú TV/CATV está ajustado a  
la posición apropiada en la selección de menú de la pantalla.  
17  
La recepción no es posible más  
allá del canal 13  
Si está usando una antena, revise las conexiones de la antena de UHF. 11  
La estación sintonizada no está transmitiendo.  
El temporizador de desactivación automática ha sido activado.  
El suministro de energía se ha interrumpido.  
14  
15  
El televisor se apaga  
Estación de TV está experimentando problemas o programa  
sintonizado no es en modo de subtítulo cerrado. Pruebe en otro canal.  
Asegúrese de conexión de CATV o antena VHF/UHF,  
reposición o gire antena.  
18  
11,12  
16  
La función de subtítulo cerrado  
no es activada.  
Precione TV/CAP/TEXT para encender la codificador de subtítulo  
cerrado.  
La lengua deseada no se  
muestra.  
Seleccione la lengua apropiada en las selecciones de menú.  
13  
42  
5E80301A S (40-Back)  
42  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problemas y localización de averías  
SINTOMA  
POSIBLE SOLUCION  
Página  
DVD  
• No hay disco colocado.  
• El disco puede estar sucio. Limpie el disco.  
• El aparato no puede reproducir CD-ROM, etc.  
26  
6
No empieza la reproducción.  
No hay imagen.  
No hay sonido.  
• El selector TV/AV no está ajustado correctamente.  
25  
• Compruebe que el selector de entrada del amplificador está en  
la posición correcta.  
• El aparato está en un modo de reproducción especial.  
27  
40  
Seleccionar la posición correcta de la Salida de Audio en el amplificador AV.  
La imagen se ve distorsionada  
durante la localización progresiva  
o regresiva.  
La imagen puede quedar distorsionada a veces.  
No puede parar la reproducción,  
búsqueda, cámara lenta,  
• Algunos discos pueden no aceptar algunas funciones.  
reproducción repetida o  
reproducción programada, etc.  
No se ve la imagen en 4:3 (16:9). • El ajuste no corresponde al de su TV.  
No hay indicaciones en la pantalla. • Seleccione Display On.  
33  
33  
40  
Noseescuchaelsonidoambiental. • El ajuste no corresponde al de su sistema estéreo.  
Una tecla del aparato o mando a  
distancia no lo hace funcionar.  
• Desconecte el aparato y desenchufe el cable eléctrico de CA  
durante varios minutos. Vuelva a enchufar.  
No empieza la reproducción al  
seleccionar el título.  
• Verifique el ajuste del nivel de prohibición.  
36~38  
El idioma de la pista de sonido de  
audio y/o subtítulos no cambia al  
reproducir un DVD.  
• No se han grabado múltiples idiomas en el disco DVD.  
33  
• Algunos discos no tienen subtítulos.  
• Los subtítulos se han eliminado. Presione SUB TITLE.  
No se ven los subtítulos.  
31  
No cambia el ángulo.  
• No se ha grabado desde múltiples ángulos en el disco DVD.  
• La función está prohibida para este aparato o disco.  
32  
Aparece “ ” en la pantalla.  
CONTROL REMOTO  
• Apunte el mando a distancia hacia el sensor remoto.  
• Utilice a una distancia de menos de 5 metros o baje la luz en la  
habitación.  
• Elimine los obstáculos para el rayo infrarrojo.  
• Las pilas están gastadas. Cambie las pilas.  
• Compruebe que las pilas están bien colocadas.  
No funciona el mando a distancia.  
10  
PARA INFORMACION ADICIONAL SOBRE LOS AJUSTES U OPERACION, FAVOR DE VISITAR NUESTRA PAGINA WEB  
WWW.MEMCORPINC.COM O LLAMAR A SERVICIO A CLIENTES AL NO. 1-800-919-3647  
FAVOR DE CONSERVAR TODO EL EMPAQUE POR LO MENOS POR 90 DIAS EN CASO DE QUE TENGA QUE DEVOLVER  
ESTE PRODUCTO AL LUGAR DE COMPRA O A MEMOREX PARA OBTENER REFACCIONES Y ACCESORIOS,  
COMUNICARSE A FOX INT’L AL NO. 1-800-321-6993.  
43  
5E80301A S (40-Back)  
43  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disturbios de recepcion  
La mayoría de los tipos de interferencia de televisión pueden ser solucionados ajustando la altura y la  
posición de la antena de VHF/UHF. Para obtener los mejores resultados se recomiendan las antenas  
exteriores. Los tipos más comunes de interferencia de televisión están mostrados abajo. Si aparece  
uno de estos síntomas cuando el TV/DVD está conectado a un sistema de TV cable, el disturbio puede  
ser causado por la compañía local emisora de TV cable.  
IGNICION  
Aparecen manchas negras o bandas horizontales y la imagen puede  
ondular o ser inestable. Es generalmente causado por interferencia  
proveniente de los sistemas de encendido de los automóviles,  
lámparas de neón o máquinas herramientas de CA y artículos  
electrodomésticos tales como taladros y secadores de cabello.  
FANTASMAS  
Los fantasmas son causados por una señal de televisión que fluye por  
dos vías. Una es la vía directa y la otra es la reflejada por los edificios  
altos, colinas u otros objetos grandes. El cambiar la dirección o  
posición de la antena puede mejorar la recepción.  
NIEVE  
Si el TV/DVD está ubicado lejos de la estación de TV, en un área de  
recepción limitada donde la señal es débil, pueden aparecer pequeños  
puntos en la imagen. Si la señal es extremadamente débil, puede ser  
necesario instalar una antena externa más grande.  
INTERFERENCIA DE RADIO FRECUENCIA (RFI)  
Causada por radios de dos vías, este tipo de interferencia produce  
ondulaciones que se mueven o líneas diagonales en la imagen.  
En algunos casos puede causar pérdida de contraste de la misma.  
El cambiar la dirección y la posición de la antena, o la instalación de un  
filtro de RFI puede mejorar la imagen.  
VARIACION DEL TAMAÑO DE LA IMAGEN  
Una pequeña variación del tamaño de la imagen es normal cuando  
usted ajusta los controles de CONTRASTE o BRILLO.  
CUIDADOSY MANTENCION  
Para evitar incendios o peligros de choques eléctricos, desconecte el TV/DVD de la fuente de CA antes de la  
limpieza. La terminación del gabinete puede ser limpiada con un paño suave y un jabón suave y como otros  
muebles. Tome precauciones cuando limpia o pasa un paño en las partes de plástico.  
44  
5E80301A S (40-Back)  
44  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Especificaciones  
GENERALIDADES  
Fuente de alimentación:  
Consumo de energía:  
120V CA, 60 Hz  
Operation: 90 Vatios  
Stand by: 5 Vatios  
47,4 libras (21,5 kg)  
Peso:  
Dimensiones:  
Anchura :  
Altura :  
19-1/4 pulgadas (489 mm)  
18-7/8 pulgadas (480 mm)  
Profundidad : 18-5/16 pulgadas (465 mm)  
Temperatura de  
operación:  
Humedad de  
funcionamiento:  
5° - 40°C  
Menos de 80%  
TELEVISOR  
Tubo de imagen:  
Tipo de sintonizador:  
Canales de recepción:  
19” (480 diagonalmente)  
Cuarzo PLL frecuencia sintetizada  
VHF  
UHF  
2-13  
14-69  
CATV 14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-125 (100)-(125)  
01 (5A)  
Entrada de antena:  
Altavoz:  
Cable coaxial de entrada de VHF/UHF 75 ohmios  
3" (76 mm), 8 ohmios x 2  
Potencia de salida de  
audio:  
2,5W + 2,5W  
Tocadiscos de DVD/  
Discos compactos  
Señal de Sistema:  
Disco utilizable:  
NTSC  
1. DVD (12cm, 8cm)  
2. CD (12cm, 8cm)  
Características de audio  
Respuesta de frecuencia:  
Entradas/Salidas:  
DVD: 4Hz - 22KHz  
CD: 4Hz - 20KHz  
Entradas : Video : (RCA) 1 Vp-p/75 ohmios  
Audio : (RCA) –8 dB/50 Kohmios  
Salidas : Video : (RCA) 1 Vp-p/75 ohmios  
Audio : (RCA) –8 dB/1 Kohm  
0,5 Vp-p/75 ohmios terminados  
Salida de audio digital:  
Captor:  
CD :  
Longitud de onda: 775 – 815 nm  
Potencia máxima de salida: 0,5 mW  
Longitud de onda: 650 – 666nm  
Potencia máxima de salida: 2,0 mW  
DVD :  
Accesorio:  
Control Remoto  
45  
5E80301A S (40-Back)  
45  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
J5E80301A  
03/02  
Z
5E80301A S (40-Back)  
46  
22/01/2003, 21:55  
Download from Www.Somanuals.com. All Manuals Search And Download.  

KWC Plumbing Product 28243226000 User Manual
La Crosse Technology Portable Radio WD 3106UR B User Manual
LG Electronics Cell Phone TM510 User Manual
Liebert Surge Protector Integrated Secured Protection User Manual
Liebherr Freezer UIG1313 User Manual
Mace Security Camera CAM 68CIR User Manual
Magnavox VCR VR400BMG User Manual
Makita Sander SA7000C User Manual
Maytag Washer Dryer MAF9601 User Manual
Micro Innovations Digital Camera Micro Webcam Matrix User Manual