MKS8503
User’s Guide
CD/CD+G
Karaoke System
with B&W Monitor
and Video Camera
Before operating this product,
pleaseDorwenlaoaddfrotmhWewws.Seomainnuasls.ctormu. Acll Mtainouanls SsearcchoAnmd Dopwnlleoadt.ely.
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion-and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
15. OVERLOADING
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes and requirements for grounding electrodes.
ANTENNA
LEAD IN
WIRE
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
GROUND
CLAMP
Do not use this product near water–for example: near a bathtub,
washbowl, kitchen sink or laundry tub; in a wet basement; or near a
swimming pool.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket or table
ELECTRIC
SERVICE
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
EQUIPMENT
GROUND CLAMPS
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
NEC - NATIONAL ELECTRICAL CODE
(NEC ART 250, PART H)
PORTABLE CART WARNING
(symbol provided by RETAC)
S2898A
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force and uneven
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation, to ensure reliable operation of the product and
to protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the product
on a bed, sofa, rug or other similar surface. This product should never
be placed near or over a radiator or heat source. This product should
not be placed in a built-in installation such as a bookcase or rack
unless proper ventilation is provided or the manufacturer's instructions
have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
11. GROUNDING OR POLARIZATION
service personnel under the following conditions:
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment of other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance–this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
FRONT
1. Color Video Camera
2. Monitor
3. POWER Button
4. STOP (I) Button
5. INTRO Button
6. SKIP/SEARCH N Button
7. Indicators (PROGRAM, PLAY/PAUSE,
INTRO and REPEAT)
1
20
21
8. AVC (Auto Voice) Control
9. FUNCTION Switch (CDG/TAPE/AUX)
10. SKIP/SEARCH O Button
11. ECHO Control
2
3
22
4
5
12. MIC 1 Holder
23
24
13. MIC 2 VOLUME Control
14. Cassette Compartment
15. MIC 1 VOLUME Control
16. Cassette Buttons (from right to left) -
PAUSE (P)
6
7
25
26
27
28
29
30
31
8
9
10
11
12
STOP/EJECT (
)
FAST FORWARD (¨¨)
REWIND (ÃÃ)
PLAY (¨)
13
14
15
16
32
RECORD (Q)
17. MIC 1 Jack
18. MIC 2 Jack
19. Speaker
17
18
33
20. CD Compartment (Top of Unit)
21. CD OPEN/CLOSE Area (Top of Unit)
22. CD Display
23. MEGA BASS Button
24. PLAY/PAUSE (®P) Button
25. PROGRAM Button
26. MASTER VOLUME Control
27. REPEAT Button
19
28. MONITOR Switch
(CAMERA/CDG/AUX/OFF)
29. VIDEO OUT Switch
(CDG/AUX/CAMERA)
30. BALANCE Control
31. MIC 2 Holder
REAR JACK PANEL
32. PITCH Control
33. Headphone Jack
REAR JACK PANEL
34. V-HOLD Control
35. BRIGHT Control
36. CONTRAST Control
37. VIDEO IN Jack
38. VIDEO OUT Jack
34
35
36 37 38 39 40
39. AUX OUT Left and Right Jacks
40. AUX IN Left and Right Jacks
4
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SOURCE
AC:
Use the AC polarized line cord included with the unit for
operation on AC power. Insert into a conveniently located AC
outlet having 120V, 60Hz.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does
not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician
replace the obsolete outlet.
AC Outlet
OPTIONAL CONNECTIONS
If you are using special CD+G (Graphics) discs in this Karaoke system, you can connect this unit to an
external television set in order to see the On Screen Graphics that are recorded on CD+G Karaoke discs or
the camera’s image on an external TV, as well as the built-in monitor. To see the on screen graphics recorded
on the CD+G disc, make sure the MONITOR switch is set to the CDG position. To see the camera’s image,
make sure the MONITOR switch is set to the CAMERA position.
The video cable has yellow RCA type plugs on each end. Please note that your TV set must have an RCA type
COMPACT
Video Input jack in order to view the CD+G lyrics on your TV screen. You cannot connect this
portable Karaoke system to your TV’s coaxial antenna terminal.
DIGITAL AUDIO
Also note that On Screen lyrics are only available on special Karaoke compact discs that bear the
GRAPHICS
CD+G mark.
Many newer TV sets have a set of Video and Stereo Audio jacks on the front panel for quick and easy
connections without having to turn the TV set to gain access to the jacks on the back panel. If your TV set has
such front panel A/V jacks, we suggest that you use those jacks to connect your portable Karaoke system.
After connecting the Video Out jack on this Karaoke system to the Video In jack on your TV with the included
video cable, you have the following three choices:
1. Listen to the sound from the built-in speakers in this Karaoke system. In this case, no external audio
connections are required, just the video connection.
2. If your TV has stereo audio input jacks, you can connect the Aux Out jacks on the back of this unit to the
Audio In jacks on your TV. The stereo audio connection cable is included. In this case, the lyrics from the
CD+G disc will appear on your TV screen and/or monitor and the sound from the disc will be heard from
your TV speakers.
From
Video
Out
KARAOKE UNIT
From
Aux
Out
To Video
To
In
Audio In
TELEVISION
5
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL CONNECTIONS (CONTINUED)
Note: If you have a mono TV with only one Audio In jack, you may have to purchase a “Y” adapter (stereo
to mono) at your local electronics accessories store in order to combine the Left and Right stereo channels
from this portable Karaoke system to a single mono channel for connection to your mono TV.
3. You can connect the Aux Out jacks from this portable Karaoke system to the Aux In or Audio In jacks of
your home stereo system to hear the sound through your home stereo speakers. Follow the instructions for
your home stereo system to select the device connected to the external jacks as the audio source.
From
Video
Out
KARAOKE UNIT
From
Aux
Out
To Video
In
TELEVISION
RECEIVER OR HOME STEREO
To
Audio In
IMPORTANT NOTE: Slide the VIDEO OUT switch to the desired position when
connecting the unit as per these procedures.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONNECTIONS (CONTINUED)
CONNECTING AN EXTERNAL AUDIO UNIT
Slide the FUNCTION switch to the
AUX position when connecting
the unit as per this step.
KARAOKE UNIT
To
Audio In
EXTERNAL AUDIO SOURCE
From
Aux
Out
NOTES:
• Connecting the unit to an external audio source will allow you to broadcast the external unit’s sound through
this unit’s speakers.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplugged before making any
connections.
CONNECTING AN EXTERNAL VIDEO UNIT
Slide the FUNCTION switch to the
AUX position when connecting
the unit as per this step.
KARAOKE UNIT
To see the image on the monitor,
slide the MONITOR switch to the
To Video
In
AUX position.
EXTERNAL VIDEO SOURCE
From
Video Out
NOTES:
• Connecting the unit to an external video source will allow you to see the external unit’s video through this unit’s
monitor.
• When connecting the external unit, refer to the owner’s manual of the external unit, as well as this manual.
• When connecting the external unit, make sure the power is off and both units are unplugged before making any
connections.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION
CONNECTING THE MICROPHONE
This unit has two microphone jacks which will allow you to sing along with your favorite songs. Before
connecting, make sure the MIC VOLUME controls are set to minimum.
HEADPHONE JACK
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.
The speakers are automatically disconnected when the headphone plug is inserted into the jack.
ECHO CONTROL
BALANCE CONTROL
1
1
Rotate the ECHO control clockwise to
increase the echo or counterclockwise to
decrease the echo.
Rotate the BALANCE control clockwise
to hear the music and vocals or
counterclockwise to hear the music only.
NOTE: To use the BALANCE control, a
karaoke tape or CD+G disc must be
used.
PITCH CONTROL
MEGA BASS BUTTON
1
1
When playing a cassette tape, rotate the
PITCH control clockwise to increase the
tape speed and make the music sound
sharper. Rotate counterclockwise to
decrease the tape speed and make the
music sound flat.
Press the MEGA BASS button to the in
position to activate mega bass and
enhance the overall bass sound. Press
the MEGA BASS button to the out
position to turn mega bass off.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
AUTO VOICE CONTROL
MONITOR SWITCH
When the AVC feature is activated, the vocals
on a multiplex recording are muted as soon as
the singer begins singing into the microphone.
When the singer stops singing, the vocals are
automatically un-muted. Adjust AVC control for
the best balance between playback and
microphone levels.
Slide the MONITOR switch to select what image will
appear on the built-in monitor:
OFF: No image on the monitor.
AUX: The video from the A/V IN jacks will appear on
the external TV.
CDG: The lyrics will appear on the monitor.
CAMERA: The camera’s image will appear on the
monitor.
IMPORTANT: This feature only works with
multiplex CDs and cassettes.
FUNCTION SWITCH
MIC ON/OFF SWITCH
VIDEO OUT SWITCH
1
1
1
Slide to the CDG position when
using CDG or CDs, slide to the
TAPE position when playing
tapes or slide to the AUX
position when listening to the
unit connected to the A/V IN
jacks on the rear of the unit.
To output this unit’s video/audio
onto the unit connected to the
A/V OUT jacks. Slide to the
CDG position when viewing/
listening to a CDG or CDs, slide
to the AUX position when
listening to the unit connected to
the A/V IN jacks on the rear of
the unit or slide to the CAMERA
position to view the camera’s
image.
To turn the microphone on, slide
the ON/OFF switch, located on
the side of the microphone, to
the ON position. To turn the
microphone off, slide the
ON/OFF switch to the OFF
position.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
PLAYING COMPACT DISCS
NORMAL PLAYBACK
(For karaoke, please refer to page 15.)
1
2
3
Press the POWER button to turn Slide the FUNCTION switch to Lift up the LIFT TO OPEN area to
the unit on; the POWER indicator
will light.
open the CD compartment door.
Place a CD in the compartment,
with the printed label side facing
the CDG position.
up
and
close
the
CD
compartment door.
4
5
6
2
1
The CD player will read the table
of contents on the disc and the
total number of tracks on the disc
will appear in the display.
Adjust the MASTER VOLUME
control 1 and MEGA BASS
button 2 as desired. Playback will
continue until all of the tracks on
the disc have been played.
Press the PLAY/PAUSE (¨p)
button to begin playback on
Track 1; the PLAY/PAUSE
indicator will light.
7
8
9
To stop playback before the disc After the last track has been Remove your disc and press the
ends, press the Stop (I) button. played, the disc stops auto- POWER button to turn the unit
matically and the display shows off; the POWER indicator will turn
the total number of tracks on the off.
disc. If you are finished listening,
The disc will stop and the display
will show the total number of
tracks.
lift up the LIFT TO OPEN area to
open the CD compartment door.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
2
CD PAUSE CONTROL
1
During CD playback, if you wish
to pause the disc momentarily,
press the PLAY/PAUSE (¨p)
Press the PLAY/PAUSE (¨p)
button again to release pause and
resume normal CD playback; the
button. Playback stops but the PLAY/PAUSE indicator will light.
disc continues to spin and the
PLAY/PAUSE indicator will blink.
TO BEGIN PLAYBACK FROM A SPECIFIC TRACK
1
2
2
1
After you insert the disc into the CD
player and the total number of tracks
appear on the display, you may press
either the SKIP/SEARCH o 1 or n 2
button to select a specific track for
playback.
When the desired track number
blinks in the display, within five
seconds, press the PLAY/PAUSE
(¨p) button. Playback will begin
on the track you selected.
FORWARD/REVERSE SKIP TRACK AND HIGH-SPEED MUSIC SEARCH (
/
)
1
2
3
CD ONLY
During playback, depress and
hold either the SKIP/SEARCH n
or o button to move the player
forward or backward within a
track to locate a specific musical
passage. The player will move
forward or backward at high
speed as long as the button is
depressed. When you release the
SKIP/SEARCH n or o button,
normal playback will resume.
During playback, press the During playback, press the
SKIP/SEARCH n button once to SKIP/SEARCH o button once to
advance the player to the move the player back to the
beginning of the next track. Press beginning of the current track. Press
the SKIP/SEARCH n button the SKIP/SEARCH o button
repeatedly to advance the player repeatedly to move the player back
to higher-numbered tracks.
to lower-numbered tracks.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
REPEAT PLAYBACK
1
2
3
2
2
1
1
3
4
2
1
To repeat a single track, while in To repeat all of the tracks on a To cancel Repeat Playback,
the Stop mode, press the disc continuously, while in the press the REPEAT button ‚ until
REPEAT button ‚ once; the Stop mode, press the REPEAT
the REPEAT indicator goes out.
You can also cancel Repeat
button ‚ twice; the REPEAT
REPEAT indicator will blink.
indicator will light solid. Press the Playback by pressing the STOP
Press the SKIP/SEARCH o 2 or
(I) button ƒ.
PLAY/PAUSE (¨p) button ƒ to
repeat all tracks.
n 3 button to select the specific
track that you wish to repeat.
When the desired track number
blinks in the display, within five
seconds, press the PLAY/PAUSE
(®p) button ꢀ to begin playback.
The specific track you selected
will be repeated continuously.
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks
on any disc for playback in any desired order. You may program 20 different tracks or you may also program
certain tracks to play more than once.
To perform programmed playback, proceed as follows:
1
2
3
1
2
Press the POWER button ‚ to Lift up the LIFT TO OPEN area to Press the PROGRAM button; “0”
open the CD compartment door. will blink in the display and the
Place a CD in the compartment, PROGRAM indicator will blink.
with the printed label side facing
turn the unit on. Slide the
FUNCTION switch ƒ to the CDG
position.
up
and
close
the
CD
compartment door.
CONTINUED ON THE NEXT PAGE
12
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
4
5
6
3
3
3
2
2
2
1
1
1
Repeat step 5 until you have
programmed the desired track
numbers into the CD Program
Memory.
When the memory is full, “- -” will
blink in the display.
Press the SKIP/SEARCH o 1 or Press either the SKIP/SEARCH o
1 or n 2 button to select the next
track you wish to program. When
the desired track number appears
in the display, press the
PROGRAM button „ again.
n 2 button to select the first track
that you wish to program. When
the desired track number appears
in the display, press the
PROGRAM button „ again.
Press the PLAY/PAUSE (¨p) button ‚ to begin programmed
playback. The PROGRAM indicator will blink and playback will begin
on the first track that you programmed. The player will continue to play
all of the tracks that you programmed in the order in which you
programmed them. When the last programmed track has been played,
the player will stop and the display will again show the total number of
tracks on the disc. If you press the PROGRAM button ƒ and then
7
2
1
press the PLAY/PAUSE (¨p) button ‚ again, playback will start on
the first track you programmed and will continue until all the
programmed tracks have been played.
To clear programmed playback, while in the Stop mode, press the PROGRAM button followed by the
STOP (I) button or open the CD door.
To check the programmed tracks, while in the Stop mode, press the PROGRAM button repeatedly to view
the programmed tracks.
PROGRAMMED REPEAT
1
2
3
It is also possible to use the
Program and Repeat functions
together to repeat a specific
program indefinitely. First, program
the tracks you wish to hear in the
order you wish to hear them, as
described above. Then, press the
REPEAT button twice. The
PROGRAM indicator will blink and
the REPEAT indicator will light.
Programmed Repeat operation
will continue indefinitely until you
press the STOP (I) button or
open the CD door.
Press the PLAY/PAUSE (¨p)
button to begin programmed
repeat playback. The player will
play the tracks you selected in the
order in which you programmed
them. When the last track in the
program has been played, the
entire program will begin again.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
INTRO PLAYBACK
Follow the instructions below to play back the first 10 seconds of each track:
1
2
During playback, press the If you hear a song you want to
INTRO button; the INTRO hear in its entirety, press the
indicator will light and the unit will INTRO button again; the INTRO
then play the first 10 seconds of indicator will turn off.
each track and then stop.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
PLAYING A CD+G (COMPACT DISC + GRAPHICS) KARAOKE DISC
You can listen to a CD+G karaoke disc. CD+G discs combine the recorded music with an additional video
track that displays the song lyrics on this monitor and/or an external TV, if connected. As the song plays, the
words to be sung are highlighted on most CD+Gs.
2
1
2
3
1
2
1
1
Insert a CD+G disc. Insert the
microphone into the MIC jack(s)
‚ and slide the FUNCTION
switch ƒ to the CDG position.
You can connect the unit to a TV Slide the MONITOR switch ƒ to
or TV and stereo as shown on
the CDG position to see the
Slide the VIDEO OUT switch ‚ to
the CDG position to see the
CD+G lyrics on the external TV.
Press the PLAY/PAUSE (¨p)
button to start CD+G playback
and the image and lyrics will
appear on the monitor and/or
external TV.
pages 5 and 6.
CD+G lyrics on the monitor.
5
4
2
1
1
Rotate the AUTO VOICE control
clockwise to suppress the vocal
tracks on the CD being played
Adjust the MIC VOLUME controls ‚ as desired. Increasing this control
will increase the volume of the microphone. Adjust the ECHO control
ƒ to add an echo effect to your voice. The ECHO control ƒ is variable
so add as much or as little reverb as desired. Sing or talk into the
microphone and you will hear both the CD+G and the microphone.
when
singing
into
the
microphone. Rotate the AUTO
VOICE control counterclockwise
to have the vocal tracks on the
CD play at normal volume.
6
NOTE: The Program and Repeat features on a CD+G
disc operate the same as with a standard CD.
Rotate the BALANCE control
clockwise to hear the vocals or
counterclockwise to hear the
music only. Be sure that the
BALANCE control is set to the
center position so that you hear
both the vocal and music tracks
with equal volume.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
INFORMATION ABOUT CD+G KARAOKE DISCS:
CD+G Karaoke discs are designed specifically for playback in special CD players that include a
CD+G decoder, such as this unit. These discs contain the lyrics to each song and the lyrics will
appear on your TV screen, line by line, as the disc is playing. Usually the words on the screen will
change color in time with the music to help you sing along at the proper tempo, even if you do not
know the song.
Most CD+G Karaoke discs have all of the songs recorded twice, first with music only, and then
with music and vocals together. For example, if you purchase a CD+G disc containing four songs,
tracks one through four will have the music only without vocals, and tracks five through eight will
have the same four songs recorded with music on the left channel and the vocal tracks on the right
channel.
If you wish to sing along “solo” without any other vocals, you should select tracks one through four
(for example). If you wish to sing a “duet” or be part of a group, select tracks five through eight (for
example) that contain both the music and vocals.
NOTE: Make sure the BALANCE control is set to the center position so you can hear both the
vocal and music tracks at an equal level.
MICROPHONE FEEDBACK:
“Feedback” is a howling or screeching sound that occurs when the microphone comes too close to
the speaker. To avoid microphone feedback, keep the microphone as far away from the speaker as
the microphone cable will allow. If you must bring the microphone close to the speaker, such as
when you are changing a disc or adjusting one of the other controls on the front of the unit, set the
microphone ON/OFF switch to the OFF position.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
PLAYING CASSETTE TAPES OR KARAOKE CASSETTE TAPE
1
2
3
Press the PLAY (¨) button to
begin playback.
Slide the FUNCTION switch to
the TAPE position. Open the
cassette button compartment to
expose the cassette buttons.
Press the STOP/EJECT (
)
button to open the cassette door
and insert a cassette with the
open end facing down. Close the
cassette door.
4
5
6
2
1
3
3
1
Adjust the MASTER VOLUME To advance or rewind the tape To pause playback momentarily,
rapidly, press either the FFWD
(¨¨) ‚ or REWIND (ÃÃ) ƒ
control 1, MEGA BASS button 2
and PITCH control 3 as desired.
press the PAUSE ( ) button. The
tape movement stops but the tape
button. When you reach the motor is still running. Press the
desired point, press the PLAY
(¨) button „ to resume normal
playback.
PAUSE ( ) button again to
release pause and resume
normal playback.
KARAOKE:
7
8
If you would like to sing along with
a tape, simply play the tape,
insert a microphone and sing
along. When playing a karaoke
cassette tape, adjust the AUTO
VOICE control for the best
balance between playback and
microphone levels.
To stop playback before the tape When the tape reaches the end,
ends, press the STOP/EJECT the auto-stop mechanism
activates, the PLAY (¨) button is
released and the tape motor
shuts off. Press the STOP/EJECT
(
) button. The PLAY (¨)
button is released and the tape
motor shuts off.
(
) button to open the cassette
door and remove the tape.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
KARAOKE RECORDING FROM A CD OR CD+G (COMPACT DISC + GRAPHICS) DISC
You can record onto a cassette tape from a CD+G karaoke disc or standard CD.
1
2
3
2
1
Slide the FUNCTION switch to the
CDG position. Insert the
microphone into the appropriate
jack.
Press the STOP/EJECT (
)
Press the PAUSE ( ) button ‚,
then press the RECORD
utton ƒ (the PLAY (¨) button will
button to open the cassette door
and insert a cassette with the
open end facing down. Close
cassette door.
(
)
b
be automatically depressed).
4
5
6
2
2
1
1
1
Adjust the AUTO VOICE control Adjust the MIC1/MIC2 VOLUME
Press the PAUSE ( ) button ‚ to
release pause and then press the
CD PLAY/PAUSE (¨ ) button 2
to start CD/CD+G playback.
controls ‚ as desired. Increasing
this control will increase the
for the best balance between
playback and microphone levels.
IMPORTANT: This feature only volume of the respective
microphone. Adjust the ECHO
control ƒ to add an echo effect to
your voice. The ECHO control ƒ is
variable so add as much or as little
reverb as desired.
works with multiplex CDs.
NOTES:
7
8
•
Refer
to
SAFEGUARD
ACCIDENTAL
AGAINST
ERASURE section (page 20) if
the RECORD button
cannot be pressed.
(
)
•
Keep the microphone away
from the unit to avoid
feedback.
Turn the microphone on using the When you are finished recording,
Microphone ON/OFF switch. Sing
or talk into the microphone(s) and
both the CD/CD+G and the
microphone(s) will be recorded
onto the cassette.
press the STOP/EJECT (
button to stop the tape.
)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATION (CONTINUED)
USING THE BUILT-IN CAMERA
1
2
3
1
2
Slide the VIDEO OUT switch ‚ to Lift
open
the
camera ADJUSTING FOCUS: Rotate the
compartment and remove the ring located on the outside of the
protective cover on the camera camera lens to adjust the
lens. The camera will then show camera’s focus.
the image on the monitor and/or
the external TV screen.
Rotate the camera as desired.
the CAMERA position to see the
camera’s image on the external
TV. Slide the MONITOR switch ƒ
to the CAMERA position to see
the camera’s image on the
monitor.
ADJUSTING THE PICTURE
When watching a CD+G on the monitor screen, adjust the brightness, v-hold and contrast as follows:
V-HOLD
CONTRAST
BRIGHTNESS
If the picture moves up and down
or rolls, rotate to adjust the
vertical hold.
If the picture is too light or too
dark, rotate to adjust the
brightness.
If the picture is too strong or too
weak, rotate to adjust the contrast
and clearly define the shades of
blacks, grays and whites.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program
material previously recorded is automatically
erased and only the new recording remains. To
safeguard valuable recordings from being erased
accidentally, the cassette and the deck are
equipped with a special device.
On the back of the cassette there is an erase
prevention tab on each side. To prevent
accidental erasing, break out these tabs with a
screwdriver. If only one side of the tape is to be
protected, break out the tab on the left side with
the side desired facing you.
E 1
Tab for side 2
Tab
S I D
Tab for side 1
To record on a tape in which the tab has been
broken, place a piece of adhesive tape over that
area.
Break out the tab
to prevent recording
NOTE: When a tab is broken out, the RECORD
button cannot be depressed.
Cover with tape to record again
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of recording time on each side.
Longer length tapes of 60 (C-120) minutes of recording time on each side are not recommended. Use only
high quality tapes. If a problem develops, check the unit first with another cassette to determine if the
problem is with the cassette, and not with the unit.
If there is any slack in the cassette, it should be removed before inserting the cassette. Place a pencil in one
of the hubs and rotate it clockwise until all of the slack is taken up.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE (CONTINUED)
Caring for Compact Discs
• Treat the compact disc carefully. Handle the compact disc
only by its edges. Never allow your fingers to come in contact
with the shiny, unprinted side of the compact disc.
• Do not attach adhesive tape, stickers, etc. to the compact
disc label.
• Clean the compact disc periodically with a soft, lint-free,
dry cloth. Never use detergents or abrasive cleaners to
clean the compact disc. If necessary, use a CD cleaning kit.
• If a disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
• When cleaning the compact disc, wipe in straight lines from the center of the compact disc to the outer
edge of the compact disc. Never wipe in circular motions.
Z
COMPACT
• This unit is designed to play only compact discs bearing the identification logos as
DIGITAL AUDIO
shown here. Other discs may not conform to the CD standard and may not play
GRAPHICS
properly.
• Compact Discs should be stored in their cases after each use to avoid damage.
• Do not expose compact discs to direct sunlight, high humidity, high temperatures or dust, etc. Prolonged
exposure or extreme temperatures can warp the compact disc.
• Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the ink,
may damage the surface.
Cleaning the Unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
• Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or isopropyl alcohol, then wipe dry with another swab.
Cotton Swab
Capstan
Pinch Roller
Erase
Head
R/P
Head
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the
tape assembly.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Possible Cause
Solution
Compact Disc Player
CD Player will not play.
CD is not installed or installed
upside-down.
Insert CD with label side up.
CD skips while playing.
Disc is dirty or scratched.
Wipe disc with cloth or use
another disc.
General
No sound.
Karaoke
Power cord disconnected.
Using non-CD+G disc.
Backup vocals are supposed
to be included.
Connect power cord.
Use CD+G disc.
This is normal, only the main vocal(s)
are to be reduced.
Some vocals are still
present when AUTO
VOICE is off.
Feedback is heard
when singing.
Microphone is too close to unit
or MIC volume is too high.
Move microphone away from
unit or decrease MIC volume.
Words do not appear
on TV screen.
Using non-CD+G disc.
Use CD+G disc.
Connections not done properly.
Connect to TV properly.
Cassette Player
No sound.
Function switch not set to TAPE.
Volume at minimum.
Dirty head.
Slide to the TAPE position.
Increase volume.
Sound distorted.
Speed varies.
Clean the head.
Cassette old.
Replace the cassette.
Replace the cassette.
Cassette tape worn out.
Cassette Recorder
Will not record.
Erase prevention tab removed.
Defective tape or dirty tape head.
Cover hole with adhesive tape.
Replace tape or clean tape head.
Distorted sound
on playback.
Camera
Camera not working.
MONITOR switch not set to CAMERA. Set MONITOR switch to CAMERA.
VIDEO OUT switch not set to
CAMERA (external TV).
Set VIDEO OUT switch to the
CAMERA position.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL:
Power Source .............................................................................................120V, 60Hz AC
Speaker ...............................................................................................Impedance 8 Ohms
Dimensions .............................................................XXC (W) x XXC (H) x XXC (D) Inches
Weight....................................................................................................................XXC lbs
Output Power...............................................................................................7W@10%THD
CD SECTION:
Disc Diameter..............................................................................................4.72” (120mm)
.....................................................................................................3.15” (80mm) Single CD
Optical Source...................................................................................Semiconductor Laser
Wavelength ..............................................................................................................780nm
D/A Conversion............................................................................................................XXC
Specifications are subject to change without notice.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 954-660-7100.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED TO
RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR TO MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|