MKS1019 O/M.QXD 7/24/03 10:49 AM Page 12
MKS1019
User’s Guide
Portable Karaoke with
AM/FM Radio and
Cassette Recorder
Before operating this product,
please read these instructions completely.
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 2
Dear Customer:
Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your
musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your
equipment offers. This manufacturer and the Electronic Industries Association’s Consumer
Electronics Group want you to get the most out of your equipment by playing it at a safe level. One
that lets the sound come through loud and clear without annoying blaring or distortion-and, most
importantly, without affecting your sensitive hearing.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of
sound. So what sounds “normal” can actually be loud and harmful to your hearing. Guard against
this by setting your equipment at a safe level BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
• Set the dial and leave it there.
Taking a minute to do this now will help to prevent hearing damage or loss in the future. After all,
we want you listening for a lifetime.
We Want You Listening For A Lifetime
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment. Since hearing
damage from loud noise is often undetectable until it is too late, this manufacturer and the
Electronic Industries Association’s Consumer Electronics Group recommend you avoid prolonged
exposure to excessive noise. This list of sound levels is included for your protection.
Decibel
Level
30
Example
Quiet library, soft whispers
40
50
60
70
Living room, refrigerator, bedroom away from traffic
Light traffic, normal conversation, quiet office
Air conditioner at 20 feet, sewing machine
Vacuum cleaner, hair dryer, noisy restaurant
Average city traffic, garbage disposals, alarm clock at two feet
80
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:
90
Subway, motorcycle, truck traffic, lawn mower
Garbage truck, chain saw, pneumatic drill
Rock band concert in front of speakers, thunderclap
Gunshot blast, jet engine
100
120
140
180
Rocket launching pad
Information courtesy of the Deafness Research Foundation.
EIA
EST. 1924
We
WantYou
LISTENING
ForALifetime
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 3
SAFETY INSTRUCTIONS
Before using the unit, be sure to read all operating instructions
carefully. Please note that these are general precautions and may not
pertain to your unit. For example, this unit may not have the capability
to be connected to an outdoor antenna.
15. OVERLOADING
Do not overload wall outlets and extension cords as this can result in a
risk of fire or electric shock.
16. OBJECT AND LIQUID ENTRY
1. READ INSTRUCTIONS
Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short out parts that could result in
fire or electric shock. Never spill or spray any type of liquid on the product.
17. OUTDOOR ANTENNA GROUNDING
All the safety and operating instructions should be read before the
product is operated.
2. RETAIN INSTRUCTIONS
The safety and operating instructions should be retained for future reference.
3. HEED WARNINGS
All warnings on the product and in the operating instructions should be
adhered to.
4. FOLLOW INSTRUCTIONS
All operating and use instructions should be followed.
5. CLEANING
Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. ATTACHMENTS
If an outside antenna is connected to the product, be sure the antenna
system is grounded so as to provide some protection against voltage
surges and built-up static charges. Section 810 of the National Electric
Code, ANSI/NFPA 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-
in wire to an antenna discharge product, size of grounding conductors,
location of antenna discharge product, connection to grounding
electrodes, and requirements for grounding electrode.
Do not use attachments not recommended by the product's
manufacturer as they may cause hazards.
7. WATER AND MOISTURE
Do not use this product near water- for example, near a bathtub,
washbowl, kitchen sink, or laundry tub, in a wet basement, or near a
swimming pool.
8. ACCESSORIES
Do not place this product on an unstable cart, stand, tripod, bracket, or
table. The product may fall, causing serious injury and serious damage to
the product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the
product. Any mounting of the product should follow the
PORTABLE CART WARNING
(symbol provided by RETAC)
manufacturer’s instructions, and should use a mounting
accessory recommended by the manufacturer.
8A. An appliance and cart combination should be moved
with care. Quick stops, excessive force, and uneven
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
surfaces may cause the appliance and cart
18. SERVICING
combination to overturn.
9. VENTILATION
Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer
all servicing to qualified service personnel.
Slots and openings in the cabinet and in the back or bottom are
provided for ventilation and to ensure reliable operation of the product
and to protect it from overheating. These openings must not be blocked
or covered. The openings should never be blocked by placing the
product on a bed, sofa, rug, or other similar surface. This product
should never be placed near or over a radiator or heat source. This
product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
19. REPLACEMENT PARTS
When replacement parts are required, be sure the service technician
uses replacement parts specified by the manufacturer or those that
have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
20. SAFETY CHECK
Upon completion of any service or repairs to this product, ask the
service technician to perform safety checks to determine that the
product is in proper operating condition.
10. POWER SOURCES
This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power
supply to your home, consult your appliance dealer or local power
company. For products intended to operate from battery power, or
other sources, refer to the operating instructions.
21. WALL OR CEILING MOUNTING
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
22. DAMAGE REQUIRING SERVICE
Unplug the product from the wall outlet and refer servicing to qualified
service personnel under the following conditions:
11. GROUNDING OR POLARIZATION
This product is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you are unable to
insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the polarized plug.
12. POWER-CORD PROTECTION
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as an adjustment o other controls may result
in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
Power-supply cords should be routed so that they are not likely to be
walked on or pinched by items placed upon or against them, paying
particular attention to cords at plugs, convenience receptacles, and the
point where they exit from the appliance.
f.
When the product exhibits a distinct change in performance - this
indicates a need for service.
13. LIGHTNING
23. HEAT
The product should be situated away from heat sources such as
radiators, heat registers, stoves, or other products (including amplifiers)
that produce heat.
24. NOTE TO CATV SYSTEM INSTALLER
To protect your product from a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.
14. POWER LINES
This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the NEC that provides guidelines for proper
grounding and, in particular, specifies that the cable ground shall be
connected to the grounding system of the building, as close to the point
of cable entry as practical.
An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 4
LOCATION OF CONTROLS
9
10
11
1
12
13
2
3
4
5
6
14
15
16
7
8
1. Cassette Buttons (right to left):
PAUSE ( )
7. FUNCTION (AM/FM/TAPE-RADIO OFF)
Control
8. MIC 1 Jack
9. FM Antenna
10. Carrying Handle
11. Cassette Compartment
12. TUNING Control
STOP/EJECT (
F.FWD (ŠŠ)
REWIND (¥¥)
PLAY (Š)
)
RECORD ( )
13. AC Jack (Rear of Unit)
14. MIC VOLUME Control
15. Battery Compartment (Rear of Unit)
16. MIC 2 Jack
2. AM/FM Dial Scale and Pointer
3. POWER Indicator
4. ECHO Control
5. MASTER VOLUME Control
6. BALANCE Control
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 5
CONNECTIONS
AC:
Use the AC polarized line cord included with the unit for
operation on AC power. Insert the small end of the AC cord into
the AC socket on the back cabinet of the unit. Insert the other
end of the AC cord into any convenient 120V 60Hz household
outlet.
NOTE: The AC plug supplied with the unit is polarized to help
minimize the possibility of electric shock. If the AC plug does not
fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician replace
the obsolete outlet.
DC:
Remove the battery cover on
the rear of the unit and insert
six (6) “C” cell batteries (not
included), observing the battery
polarity indicated inside the
compartment. Replace the
Battery Compartment cover.
+
– +
–
–
+
–
+
–
+ –
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1. Use only the size and type of batteries specified.
2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery
compartment. Reversed batteries may cause damage to the device.
3. Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc and Rechargeable) or old
batteries with fresh ones.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury
from possible battery leakage.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow
battery manufacturer’s directions.)
CONNECTING THE MICROPHONE(S)
This unit has two microphone jacks, use one with the supplied microphone, which will allow you to sing
along with your favorite songs. Before connecting, make sure the MIC VOLUME control is set to minimum.
If only connecting one microphone, connect it to the MIC 1 jack.
Only one microphone is included with this model.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 6
OPERATION
ECHO CONTROL
BALANCE CONTROL
MIC ON/OFF SWITCH
1
1
1
Rotate the ECHO control clock- Rotate the BALANCE control To turn the microphone on, slide
wise to increase the echo or clockwise to decrease the left the ON/OFF switch, located on
counterclockwise to decrease the speaker’s sound or counterclock- the side of the microphone, to the
echo.
wise to decrease the right ON position. To turn the
speaker’s sound
microphone off, slide the ON/OFF
switch to the OFF position.
RADIO OPERATION
2
1
3
1
2
Rotate the FUNCTION control to Rotate the TUNING control to Adjust the MASTER VOLUME ❶
select a station.
the AM or FM position; the Power
indicator will light.
and BALANCE ❷ controls as
desired.
4
5
ANTENNAS
AM – This unit has a built-in
ferrite rod antenna, which
provides adequate reception in
most areas. If reception is weak,
turn the unit to improve reception.
If desired, plug in one or two Slide the FUNCTION control to
FM – This unit has an FM rod
antenna. If reception is weak,
extend and rotate the rod
antenna.
microphones and slide the
ON/OFF switch, located on the
side of the microphone, to the ON
position. Adjust the MIC VOLUME
control as desired. Sing or speak
with the radio.
the TAPE/RADIO OFF position to
turn the unit off.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 7
CASSETTE TAPE OPERATION
PLAYING CASSETTE TAPES
1
2
3
Slide the FUNCTION control to
the TAPE/RADIO OFF position.
Press the STOP/EJECT (
)
Press the PLAY (Š) button to
begin playback.
button to open the Cassette Door
and insert a cassette with the
open end facing the front of the
unit. Close the Cassette Door.
4
5
6
3
1
1
2
Adjust the MASTER VOLUME ❶ To advance or rewind the tape To pause playback momentarily,
rapidly, press either the F.FWD
(ŠŠ) ❶ or REWIND (¥¥) ❷
and BALANCE ❷ controls as
desired.
press the PAUSE ( ) button. The
tape movement stops but the tape
button. When you reach the motor is still running. Press the
desired point, press the PLAY
(Š) button ❸ to resume normal
playback.
PAUSE ( ) button again to
release pause and resume
normal playback.
TO SING ALONG
7
8
If you would like to sing along with
a tape, simply play the tape,
insert one or two microphones
and sing along!
To stop playback before the tape When the tape reaches the end,
ends, press the STOP/EJECT the auto-stop mechanism
activates, the PLAY (Š) button is
released and the tape motor
shuts off. Press the STOP/EJECT
(
) button. The PLAY (Š)
button is released and the tape
motor shuts off.
(
) button to open the Cassette
Door and remove the tape.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 8
CASSETTE TAPE OPERATION (CONTINUED)
RECORDING FROM THE RADIO OR MICROPHONE (NON-KARAOKE)
1
2
3
When ready to record, press the
Slide the FUNCTION control to
the TAPE/RADIO OFF position if
recording from a microphone or
the FM/AM position if recording
from the radio.
Press the STOP/EJECT (
)
RECORD (
)
button (the PLAY
button to open the Cassette Door
and insert a blank cassette with
the open end facing the front of
the unit. Close the Cassette Door.
(Š) button will automatically
depress).
NOTES:
•
4
5
Refer to SAFEGUARD
AGAINST ACCIDENTAL
ERASURE section (page 9) if
the RECORD button cannot
be pressed.
Keep the microphones away
from the unit to avoid
feedback.
1
•
2
To pause recording momentarily,
Adjust the MASTER VOLUME ❶
and BALANCE ❷ controls as
desired. This does not affect the
recording due to the ALC circuit.
press the PAUSE ( ) button. The
tape movement stops but the tape
motor is still running. Press the
PAUSE ( ) button again to release
pause and resume recording.
KARAOKE RECORDING FROM THE RADIO OR MICROPHONE(S)
1
2
3
2
1
Insert one or two microphones Adjust the MIC VOLUME control Slide the ON/OFF switch, located
into the MICROPHONE jacks ❶ as desired. Increasing this on the side of the microphone, to
shown above, then repeat steps 1
to 3 on top of page.
the ON position. Sing or talk into
the microphone(s) and both the
audio and the microphone(s) will
be recorded onto the cassette
tape.
control will increase the volume of
the respective microphone. Adjust
the ECHO control ❷ to add an
echo effect to your voice. The
ECHO control ❷ is variable so
add as much or as little reverb as
desired.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 9
CARE AND MAINTENANCE
SAFEGUARD AGAINST ACCIDENTAL ERASURE
When a new recording is made, any program material
previously recorded is automatically erased and only the
new recording remains. To safeguard valuable
recordings from being erased accidentally, the cassette
and the deck are equipped with a special device.
On the back of the cassette there is an erase prevention
tab on each side. To prevent accidental erasing, break
out these tabs with a screwdriver. If only one side of the
tape is to be protected, break out the tab on the left side
with the side desired facing you.
To record on a tape in which the tab has been broken,
place a piece of adhesive tape over that area.
NOTE: When a tab is broken out, the record button
cannot be depressed.
CASSETTE TAPE RECOMMENDATIONS
Standard tape lengths have 15 (C-30), 30 (C-60) and 45 (C-90) minutes of
recording time on each side. Longer length tapes of 60 (C-120) minutes of
recording time on each side are not recommended. Use only high quality
tapes. If a problem develops, check the unit first with another cassette to
determine if the problem is with the cassette, and not with the unit.
If there is any slack in the cassette, it should be removed before inserting
the cassette. Place a pencil in one of the hubs and rotate it clockwise
until all slack is taken up.
Cleaning the unit
• To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning.
• The finish on your unit may be cleaned with a dust cloth and cared for as other furniture. Use caution
when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
• Periodic cleaning of the tape heads, capstan and pinch roller is necessary to maintain good sound
reproduction. Clean them after every 100 hours of use or less if playback has deteriorated. Use a cotton
swab moistened with head cleaning solution or isopropyl alcohol, then wipe dry with another swab.
NOTE: Never use metal objects on or near the tape heads. Do not allow any cleaning material to fall into the
tape assembly.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 10
TROUBLESHOOTING GUIDE
Should this unit exhibit a problem, check the following before seeking service:
Symptom
Radio
Possible Cause
Solution
Noise or sound distorted
on radio broadcasts.
Station not tuned properly for
AM or FM.
Retune the AM or FM broadcast
station.
FM: FM Rod Antenna is not fully
extended.
Fully extend FM Rod Antenna.
AM: Unit is not positioned
correctly.
Rotate unit until best reception is
obtained.
AM or FM, no sound.
FUNCTION control not on AM or FM.
Volume at minimum.
Rotate to select AM or FM .
Increase volume.
Cassette Player
No sound.
FUNCTION control not set to TAPE.
Volume at minimum.
Dirty head.
Rotate to the TAPE position.
Increase volume.
Sound distorted.
Speed varies.
Clean the head.
Tape old.
Replace the tape.
Replace the tape.
Cassette tape worn out.
Cassette Recorder
Will not record.
Erase prevention tab removed.
Defective tape or dirty tape head.
Cover hole with adhesive tape.
Replace tape or clean tape head.
Distorted sound
on playback.
Karaoke
Feedback is heard
when singing.
Microphone is too close to unit
or MIC VOLUME is too high.
Move microphone away from
unit or decrease MIC VOLUME.
General
No sound.
Power cord disconnected.
Connect power cord.
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE, PLEASE VISIT OUR WEBSITE AT
WWW.MEMOREXELECTRONICS.COM
OR CONTACT CUSTOMER SERVICE AT 1-800-919-3647.
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90 DAYS IN CASE YOU NEED
TO RETURN THIS PRODUCT TO YOUR PLACE OF PURCHASE OR MEMOREX.
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL AT 1-800-321-6993.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
MKS1019 O/M.QXD 7/24/03 10:49 AM Page 11
Memcorp, Inc.
Weston, FL
Printed in Hong Kong
Download from Www.Somanuals.com. All Manuals Search And Download.
|