Memorex MP3 Player MHD8015 User Manual

MHD8015  
User’s Guide  
1.5 GB HardDisk Storage  
MP3/WMA Player  
Before operating this product,  
Download from Www.Somanuals.com. All Manuals Search And Download.  
please read these instructions completely.  
PRECAUTIONS  
COPYRIGHT:  
Distributing copies of MP3 or WMA with DRM tracks without permission is  
a violation of international copyright laws.  
SAFETY:  
Vibration experienced during walking or exercising will not affect the player.  
However, dropping the player or dropping a heavy object on the player may result  
in damage or sound distortion.  
Avoid spilling any liquid onto or into the player.  
Do not leave the player in a location near heat sources; in a location subject to direct  
sunlight, excessive dust, sand, moisture, rain or mechanical shock; on an unlevel  
surface; or in a car with the windows closed during periods of excessive heat.  
ROAD SAFETY:  
Do not use headphones while driving, cycling or operating any motorized vehicle. It  
may create a traffic hazard and it is illegal in some areas. It can be potentially  
dangerous to play your headset at a high volume while walking, especially at  
pedestrian crossings. You should exercise extreme caution or discontinue use in  
potentially hazardous situations.  
FCC WARNING:  
This equipment may generate or use radio frequency energy. Changes or  
modifications to this equipment may cause harmful interference unless the  
modifications are expressly approved in the instruction manual. The user could  
lose the authority to operate this equipment if an unauthorized change or  
modification is made.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
FCC DECLARATION  
This device complies with Part 15 of the FCC rules. Operation is subject to the  
following two conditions: 1) This device may not cause interference, and 2) This  
device must accept any interference received, including interference that may cause  
undesired operation.  
Warning: Changes or modifications to this unit not expressly approved by the party  
responsible for compliance could void the user’s authority to operate the equipment.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or television  
reception, which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced radio/TV technician for help.  
Shield cable must be used with this unit to ensure  
compliance with class B FCC limits.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Dear Customer:  
Selecting fine audio equipment such as the unit you’ve just purchased is only the start  
of your musical enjoyment. Now it’s time to consider how you can maximize the fun  
and excitement your equipment offers. This manufacturer and the Electronic Industries  
Association’s Consumer Electronics Group want you to get the most out of your  
equipment by playing it at a safe level. One that lets the sound come through loud and  
clear without annoying blaring or distortion and, most importantly, without affecting  
your sensitive hearing.  
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher  
volumes of sound. So what sounds “normal” can actually be loud and harmful to your  
hearing. Guard against this by setting your equipment at a safe level BEFORE your  
hearing adapts.  
To establish a safe level:  
• Start your volume control at a low setting.  
• Slowly increase the sound until you can hear it comfortably and clearly, and without  
distortion.  
Once you have established a comfortable sound level:  
• Set the dial and leave it there.  
Taking a minute to do this now will help to prevent hearing damage or loss in the future.  
After all, we want you listening for a lifetime.  
We Want You Listening For A Lifetime  
Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.  
Since hearing damage from loud noise is often undetectable until it is too late, this  
manufacturer and the Electronic Industries Association’s Consumer Electronics Group  
recommend you avoid prolonged exposure to excessive noise. This list of sound levels  
is included for your protection.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Decibel  
Level  
30  
Example  
Quiet library, soft whispers  
40  
50  
60  
70  
Living room, refrigerator, bedroom away from traffic  
Light traffic, normal conversation, quiet office  
Air conditioner at 20 feet, sewing machine  
Vacuum cleaner, hair dryer, noisy restaurant  
Average city traffic, garbage disposals, alarm clock at two feet  
80  
THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE:  
90  
Subway, motorcycle, truck traffic, lawn mower  
Garbage truck, chain saw, pneumatic drill  
Rock band concert in front of speakers, thunderclap  
Gunshot blast, jet engine  
100  
120  
140  
180  
Rocket launching pad  
Information courtesy of the Deafness Research Foundation.  
We  
WantYou  
LISTENING  
ForALifetime  
EIA  
EST. 1924  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
LOCATION OF CONTROLS  
1
2
8
3
9
10  
11  
12  
4
5
6
7
13  
14  
1. Headphone Jack  
2. FWD Button  
3. REV Button  
9. Display  
10. USB Cover and Port  
11. HOLD Switch  
12. Reset Button  
4. DC IN 5V Jack z  
5. Play/Pause ®p Button  
6. Skip/Search m Button  
7. Stop X Button  
13.  
(Power On/Off)/M (Main  
Menu) Button  
14. Skip/Search l Button  
8. Volume (+/-)/Scroll  
(Up/Down) Control  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
POWER SOURCES  
AC OPERATION  
To operate the unit using AC power, connect the AC adapter (included) to an AC  
outlet having 120V, 60Hz AC only. Plug the small end into the DC 5V jack on the side  
of the unit and connect the other end into the AC outlet. It is recommended to use  
the AC adapter when possible to save battery life, particularly when transferring files.  
DC5V  
z
RECHARGEABLE BATTERY OPERATION  
This unit comes with a built-in Lithium Polymer rechargeable battery. It is  
recommended that the battery be fully charged before using for the first time and  
when the battery indicator at the top right becomes low.  
Below are the icons which will give the rechargeable battery status:  
AC Charging  
To charge the battery with the unit on:  
1. Connect to AC as described above and turn the unit on; the AC/Recharging  
(
) indicator (at the top right side of the display) will appear and blink.  
2. When the battery is fully charged, the AC/Recharging indicator ( ) will light on  
) will  
and stop blinking. When you unplug the AC adapter, the Full indicator (  
appear in the display.  
To charge the battery with the unit off:  
1. Connect to AC as described above. (To check the battery condition, unplug the  
AC adapter and turn on the unit to view the battery status icon.)  
NOTE: It takes approximately 3 hours to charge the battery from empty to full.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
DOWNLOADING AND TRANSFERRING FILES  
TO INSTALL THE "DIGITAL AUDIO PLAYER" CD SOFTWARE  
For Windows ME, Windows2000 or Windows XP:  
Windows will automatically detect the audio player without installing the CD software  
when the USB cable is connected.  
For Macintosh OSX:  
Macintosh OSX will automatically detect the audio player without installing the CD  
software. Do not install the software when using a Macintosh.  
For Windows98SE:  
The USB mass storage function will not be activated without driver installation. To  
activate the USB mass storage function, please use the installation CD-Rom to install  
the driver.  
For Windows 98SE, if you are connecting your player to your computer for the first  
time, please follow these instructions:  
Procedure to Install Player Driver  
1. Insert the CD-Rom into the CD  
Driver; open the CD Drive window  
to view files using Windows  
Explorer.  
2. Double click the “Software  
Setup.html” icon.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
WINDOWS 98 DRIVER INSTALLATION (CONTINUED)  
3. Then click “Windows 98  
Driver” in the Installation  
CD Explorer.  
4. Then the “Windows 98 Driver Installation Guide” Explorer will appear on the  
computer screen. Follow the Installation Guide’s procedure to install the Driver to  
your computer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
FORMATTING THE PLAYER  
Formatting the Player  
1. Use the USB cable to connect the player and  
the computer.  
2. The unit will restart or turn on automatically,  
“Welcome” will appear briefly and then the  
USB icon will appear in the display. (The  
player is now connected to the computer.)  
3. Double click on My computer, right click the  
"Removable Disk" and left click on "Format".  
4. At the "Format" window, select "FAT32" from  
the file system pull down menu, then click start  
to format the unit (see figure to the right).  
NOTE: Make sure you have selected the "FAT32"  
at the file system pull down menu, otherwise after  
formatting, the player will not work properly.  
5. Click OK to confirm and the player will start to  
format.  
6. When finished, click "Close" to close the  
Format window.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
DOWNLOADING AND TRANSFERRING FILES  
TRANSFERRING FILES  
You can download digital music files from the internet or use encoding software to convert music that  
you have on an audio CD into MP3 or WMA format. Once these files are stored on your computer you  
can easily copy them to your player.  
Connect the computer to your player using the supplied USB cable. The unit will restart or turn on  
automatically, “Welcome” will appear briefly and then the USB icon will  
appear in the display. (The player is now connected to the computer.)  
Double click My Computer, the double click on the “Removable Disk” to  
open the “Removable Disk” window.  
To add more files and songs to your player simply drag and drop MP3 or  
WMA files from anywhere on your computer into the "Removable Disk"  
window. When music is stored in either of these formats, it  
can contain additional information about the tracks in an  
ID3Tag. The ID3Tag contains the Artist name, Album name,  
song Title and/or Genre (style of music). When a file is  
copied to this unit, this unit retrieves the ID3 Tag  
information from the file. The unit uses this information to  
index the file into the Artist, Album, Track, Genre categories  
displayed on the unit. If the ID3 Tag is empty, the unit will  
use the file’s file name and current directory as the Track  
name and Artists name accordingly.  
IMPORTANT NOTE: The WMA file with DRM will not  
playback if you directly drag and drop it into the  
“Removable Disk” window. See pages 15-16 for  
downloading WMA files with DRM from the computer to your player.  
When you are finished, see the Safely Remove Hardware procedure on the next page before  
disconnecting the player.  
After disconnecting the player from the computer, the player will restart again, “Welcome” followed by  
“Memorex” will appear briefly and then the player will check and update the index automatically if there  
are new tracks/files which were added to the player. It will take from several seconds to several  
minutes to check/update the index (depending on the total files/tracks added). When it is finished, the  
Main Menu will show at the display automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
SAFELY REMOVING YOUR PLAYER FROM THE COMPUTER  
NOTE: To avoid damage to your player or data loss, always follow the procedure listed below before  
disconnecting the USB cable from your computer or disconnecting the player from the USB cable.  
Using your mouse, double click the "Safely Remove Hardware" icon on the task bar.  
From the "Safely Remove Hardware" window, select "USB  
Mass Storage Device" and click the "Stop" button. The "Stop a  
Hardware Device" window will pop up as shown:  
Click "OK". When the "Safe to Remove Hardware" window is  
displayed, you may remove the player from the USB cable or  
remove the USB cable from the computer. The unit will then  
restart, update and check the index automatically.  
NOTE: If the “Safely Remove Hardware” icon is not displayed on the task bar, please double click on  
My Computer. Right click on  
“Removable Disk” and left click  
on “eject”. Then it is safe to  
remove the player from the  
computer.  
After disconnecting the player from the computer, the player will restart again, “Welcome” followed by  
“Memorex” will appear briefly and then the player will check and update the index automatically if there  
are new tracks/files which were added to the player. It will take from several seconds to several  
minutes to check/update the index (depending on the total files/tracks added). When it is finished, the  
Main Menu will show at the display automatically.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
REALONE PLAYER INSTALLATION  
(PC ONLY):  
1. Insert the Installation CD-ROM into the CD Drive and  
double click Software Setup.html, the screen to the  
right will appear.  
2. Click on the desired language to start  
downloading RealOne Player.  
3. Click OPEN; the installation will automatically  
start.  
4. Follow the RealOne Install Wizard online prompts  
to complete the installation.  
NOTES:  
Before saving tracks to your RealOne player,  
open the RealOne player and click on "CD" at the bottom of the screen. Next, click on  
Preferences; select MP3 audio as the format, then click "OK". This will ensure the music is  
recorded in the correct format for the player to read.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
INSTRUCTIONS FOR DOWNLOADING SONGS FROM THE COMPUTER USING  
REALONE SOFTWARE  
1
2
Install the RealOne Software, version 2.0.  
When the unit is on, connect the USB cable to the Digital Audio Player and the USB port of the  
computer. Once the USB cable is connected to the player, the unit will restart or turn on  
automatically, “Welcome” will appear briefly and then the USB icon will appear in the display. (The  
player is now connected to the computer.)  
3
4
5
To make sure the computer recognizes the Digital Audio player, double click on MY COMPUTER,  
and check for a drive called Removable Disk. Double click on Removable Disk and minimize this  
window.  
Insert a Music CD into the CD-Rom drive of your computer, and open RealOne Media Browser.  
Next, click on the CD icon on the bottom tool bar of the Media Browser. Click on preferences,  
choose MP3 Audio, and 96Kbps Stereo and click OK.  
Click the "Save Tracks" icon on the bottom menu bar to open the "Select Tracks" dialog box. Select  
the desired tracks on the CD and click "OK" to save the tracks into My Library; "Pending" will appear  
at the end of the tracks' name and "Saved" will be shown after the track’s name when finished  
saving. Choose “My Library” from the Menu Bar and double click on the yellow folder (show  
organizer). Double click on the "All Media" (view your entire library) to view a list of the saved songs.  
Click on the yellow plus (+) sign on the left bottom tool bar and click on “Add File” to add the tracks  
to the Digital Audio player. Once you click on Add File, another dialog box will appear on your  
screen. Double click on the name of the CD that you want to load into your Digital Audio player and  
highlight all of the songs. Right click on the songs and select “Send To”, then click on the Digital  
Audio player. If you do not see your Digital Audio player, click on Copy to copy the songs.  
Open the Removable Disk window, right click to open another dialog box and click on paste to load  
your songs into your Digital Audio player. Once you paste the songs, the files will start transferring.  
Once the files are finished loading into the player, follow the “Safely Remove Hardware” procedure  
described on page 12. After disconnecting the player from the computer, the player will restart again,  
“Welcome” followed by “Memorex” will appear briefly and then the player will check and update the  
index automatically if there are new tracks/files which were added to the player. It will take from  
several seconds to several minutes to check/update the index (depending on the total files/tracks  
added). When it is finished, the Main Menu will show at the display automatically.  
6
7
8
IMPORTANT NOTE: WMA DRM files will not play on the player if you use this method for  
transferring files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
The unit will restart automatically, “Welcome” will appear briefly and then the USB  
icon will appear in the display. (The player is now connected to the computer.)  
1. Open the 'Windows  
Media Player Browser'  
and click on 'Copy to  
CD or Device’.  
2. Click on the “Items to  
Copy” pull down menu  
to locate the music files  
you wish to download.  
Make sure to tick the  
box next to the files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
DOWNLOADING AND TRANSFERRING FILES (CONTINUED)  
3.  
4.  
See page 12.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
OPERATION  
TURNING THE POWER ON/OFF  
HOLD SWITCH  
1
1
To turn the unit on, press the (Power Slide the HOLD switch to the Lock (down)  
On/Off)/M (Main Menu) button; “Welcome” position; the Lock indicator will appear in the  
followed by “Memorex” will appear briefly and display and there will be no function for the  
then the Main Menu will appear on the screen. buttons when you press the buttons. This is  
To turn the unit off, press and hold the (Power useful when you do not want the track changed  
On/Off)/M (Main Menu) button until “Continue by accidentally pressing a button. Slide the  
holding to switch off” disappears from the HOLD switch to the Unlock (up) position to  
screen.  
cancel the Hold function.  
NAVIGATING THROUGH SCREENS  
2
3
1
2
1
4
To return to the previous menu, press the REV  
button 1. To advance to the next menu, press  
the FWD button 2 or press the Volume  
(+/-)/Scroll (Up/Down) control 3. To return to the  
MAIN menu, press the (Power On/Off)/M (Main  
Menu) button 4.  
Scroll through the menus using the Volume  
(+/-)/Scroll (Up/Down) control. Select the  
file/option by pressing the Volume  
(+/-)/Scroll (Up/Down) control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
OPERATION (CONTINUED)  
SCREEN DISPLAYS AND DESCRIPTIONS  
MAIN MENU  
Transport Indicator  
Title Bar  
Battery Indicator  
Vertical Scroll Bar - At any time, if the amount  
of information to be displayed exceeds the size  
of the screen, a vertical scroll bar will be dis-  
played on the right hand edge. This will indicate  
the current position into the information to be  
displayed. Use the Volume (+/-)/Scroll (Up/  
Down) control to view information before or  
after the current view respectively.  
Main menu Screen  
NOW PLAYING MENU  
Transport Indicator  
Battery Indicator  
Battery Track Progress Bar When a track is being  
played, a progress bar is displayed showing how  
much of the track has been played and how much  
remains; the amount of time elapsed in minutes  
and seconds is displayed next to the progress bar.  
Song Title  
Artist  
Elapsed Time  
File Type (i.e. MP3, WMA)  
Mode Indicators  
Bit Rate  
Volume Level: The volume level can only be set in the Now Playing Menu.  
SETTING MENU  
Transport Indicator  
Battery Indicator  
Vertical Scroll Bar  
(See Above for Description)  
Menu Screen  
Intro Indicator  
Equalizer Setting - Normal, BASS  
(Bass Boost), ROCK, CLASS  
(Classical), POP, GRAPH (Graph EQ)  
Repeat Indicator  
Random Indicator  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
OPERATION (CONTINUED)  
TO LISTEN TO MP3s/WMAs  
1
1
2
2
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Plug the headphones into the Headphone jack 1  
and place them on your ears. Select the desired  
music storage (ARTIST, ALBUMS, TRACKS,  
GENRES OR PLAYLIST) using the Volume  
(+/-  
)/Scroll (Up/Down) control 2, then press the Volume  
(+/-)/Scroll (Up/Down) control 2 to select.  
NOTE: For playlist, you must create a playlist first,  
see page 28.  
1
1
3a  
3b  
2
2
TO PLAY A SELECTED FOLDER:  
TO SELECT AND PLAY A TRACK:  
The selected screen will appear. Select a folder  
using the Volume (+/-)/Scroll (Up/Down) control 1,  
then press the Play/Pause ®p button 2 to start  
playback of the first track inside the folder and the  
now playing menu will appear on the screen. When  
selecting an ARTIST, select the desired artist by  
using the Volume (+/-)/Scroll (Up/Down) control 1,  
then select the desired album by using the Volume  
The selected screen will appear. Select a folder  
(track if TRACKS was selected in step 2) using  
the Volume (+/-)/Scroll (Up/Down) control 1, then  
press the Volume (+/-)/Scroll (Up/Down) control  
1. Select a track using the Volume (+/-)/Scroll  
(Up/Down) control 1, then press the Volume  
(+/-)/Scroll (Up/Down) control 1 or press the  
Play/Pause ®p button 2 to start playback of the  
selected track. The “Now Playing Track Menu” will  
appear on the screen.  
(+/-)/Scroll (Up/Down) control  
1
followed by  
pressing the Play/Pause ®p button 2.  
CONTINUED ON THE NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
OPERATION (CONTINUED)  
1
2
4
5
1
2
3
Adjust the volume level using the Volume  
(+/-)/Scroll (Up/Down) control 1; the volume  
indicator will briefly be displayed on the screen.  
To turn the unit off, press and hold the (Power  
On/Off)/M (Main Menu) button 2 until the unit  
completely turns off.  
To return to the previous menu, press the  
REV button 1.  
To advance to the next menu, press the  
FWD button 2.  
To return to the MAIN menu, press the  
(Power On/Off)/M (Main Menu) button 3.  
NOTES:  
• The volume can only be adjusted at the “Now  
Playing Track Menu”. Press the REV button  
repeatedly to return to that menu.  
• See pages 8 through 16 for information on  
uploading MP3 and WMA files to this unit.  
TO PAUSE PLAYBACK  
2
1
During playback, if you wish to pause the  
Press the Play/Pause ®p button again to  
resume playback; the sound will return and  
file momentarily, press the Play/Pause ®p  
button; playback will pause and the timer the timer will start counting again.  
will stop counting.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
OPERATION (CONTINUED)  
FORWARD/REVERSE SKIP  
1
2
During playback, press the Skip/Search n During playback, press the Skip/Search o  
button to advance the player to the button to move the player back to the  
beginning of the next file in the folder. beginning of the currently playing file. Press  
Press the Skip/Search n button repeatedly the Skip/Search o button repeatedly to  
move the player back to lower-numbered  
files in the folder.  
to advance the player to higher-numbered  
files in the folder.  
HIGH-SPEED MUSIC SEARCH  
During playback, press and hold the  
Skip/Search o 1 or n 2 button to move the  
player forward or backward within a file to  
locate a specific musical passage. The  
player will move forward or backward at  
high speed as long as the Skip/Search o 1  
or n 2 button is held. When you release the  
button, normal playback will resume.  
1
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
OPERATION (CONTINUED)  
RANDOM PLAYBACK  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select SETTINGS using the Volume/  
Navigation control, then press the Volume/  
Navigation control to select it; the Settings  
menu will appear.  
4
3
Select RANDOM MODE using the Volume/ Press the REV button to return to the main  
Navigation control, then press the Volume/ menu.  
Navigation control to select it; the Random To randomly play all tracks on the unit, go to  
step 5a.  
indicator ( ) will appear.  
To randomly play a particular Artist, Album or  
Genre, go to step 5b.  
CONTINUED ON THE NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
OPERATION (CONTINUED)  
5b  
5a  
1
1
2
2
Select a folder (ARTIST, ALBUMS, GENRES or  
PLAYLIST) using the Volume (+/-)/Scroll (Up/Down)  
control 1, then press the Volume (+/-)/Scroll  
(Up/Down) control 1 to select it. Select a desired  
Artist, Albums, Genres or Playlist using the Volume  
(+/-)/Scroll (Up/Down) control 1, then press the Play/  
Pause ®p button 2 to start random playback.  
Select TRACKS using the Volume  
(+/-)/Scroll (Up/Down) control 1, then  
pressing the Volume (+/-)/Scroll (Up/Down)  
control 1 followed by the Play/Pause ®p  
button 2 to start Random playback of all the  
tracks installed.  
NOTES:  
6
If you select ARTIST in step 5b, you  
can then select a particular album of  
the selected artist for Random  
playback.  
To cancel Random Mode, repeat  
steps 2 and 3. Make sure the  
Random indicator disappears from  
the screen.  
The unit will randomly playback all the  
tracks inside the folder or album and then  
stop. Press the Stop X button to stop  
Random playback before it is finished.  
You can select multiple modes (i.e.  
Repeat and Random) as desired.  
To randomly playback the tracks  
inside the playlist, you must first  
create a playlist (see page 28).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
OPERATION (CONTINUED)  
REPEAT PLAYBACK  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select SETTINGS using the Volume  
(+/-)/Scroll (Up/Down) control, then press  
the Volume (+/-)/Scroll (Up/Down) control to  
select it; the Settings menu will appear.  
4
3
Select REPEAT MODE using the Volume  
(+/-)/Scroll (Up/Down) control, then press  
the Volume (+/-)/Scroll (Up/Down) control  
Press the REV button 1 or the (Power  
On/Off)/M (Main Menu) button 2 to return to  
the main menu.  
To repeat all tracks on the unit, go to step 5a.  
To repeat a particular Artist, Album, Genre or  
Playlist, go to step 5b.  
to select it; the Repeat indicator (  
appear.  
) will  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
OPERATION (CONTINUED)  
1
1
5b  
5a  
2
2
Select the TRACKS folder using the Volume  
(+/-)/Scroll (Up/Down) control 1, then press  
the Volume (+/-)/Scroll (Up/Down) control 1  
to select it followed by the Play/Pause ®p  
button 2 to start Repeat playback of all  
tracks.  
Select a folder (ARTIST, ALBUMS, GENRES or  
PLAYLIST) using the Volume (+/-)/Scroll (Up/Down)  
control 1, then press the Volume (+/-)/Scroll  
(Up/Down) control 1 to select it. Select a desired  
Artist, Album or Genre using the Volume (+/-)/Scroll  
(Up/Down) control 1, then press the Play/ Pause  
®p button 2 to start Repeat playback.  
6
Repeat playback will continue until the Stop  
X button has been pressed.  
NOTES:  
If you select ARTIST in step 5b, you can then select a particular album of the selected artist for  
Repeat playback.  
To cancel Repeat mode, repeat steps 2 and 3. Make sure the Repeat indicator disappears from  
the screen.  
You can select multiple modes (i.e. Repeat and Random) as desired.  
To Repeat playback the tracks inside the playlist, you must create a playlist first (see page 28).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
OPERATION (CONTINUED)  
INTRO PLAYBACK  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select SETTINGS using the Volume/  
Navigation control, then press the Volume/  
Navigation control to select it; the Settings  
menu will appear.  
4
3
Press the REV button to return to the main  
menu.  
To play the first 10 seconds of every track on  
the unit, go to step 5a.  
To play the first 10 seconds of the particular  
Artist, Album, Genre or Playlist, go to step 5b.  
Select INTRO MODE using the Volume/  
Navigation control, then press the Volume/  
Navigation control to select it; the Intro  
indicator (I) will appear.  
CONTINUED ON THE NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
OPERATION (CONTINUED)  
5b  
5a  
1
1
2
2
Select a folder (ARTIST, ALBUMS, GENRES or  
PLAYLIST) using the Volume (+/-)/Scroll (Up/Down)  
control 1, then press the Volume (+/-)/Scroll  
(Up/Down) control 1 to select it. Select a desired  
Artist, Albums, Genres or Playlist using the Volume  
(+/-)/Scroll (Up/Down) control 1, then press the  
Play/ Pause ®p button 2 to start Intro playback.  
Select the TRACKS folder, using the  
Volume (+/-)/Scroll (Up/Down) control 1,  
then press the Volume (+/-)/Scroll  
(Up/Down) control 1 followed by the  
Play/Pause ®p button 2 to start Into  
playback of all tracks.  
NOTES:  
6
If you select ARTIST in step 5b, you  
can then select a particular album of  
the selected artist for Intro playback.  
To cancel Intro mode, repeat steps 2  
and 3. Make sure the Intro icon  
disappears from the screen.  
You can select multiple modes (i.e.  
Repeat and Random) as desired.  
To Intro playback the tracks inside  
the playlist, you must create a  
Intro playback will continue until all tracks  
have been played or the Stop X button has  
been pressed.  
playlist first (see page 28).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
OPERATION (CONTINUED)  
CREATING A PLAYLIST  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select PLAYLIST MANAGER using the  
Volume (+/-)/Scroll (Up/Down) control, then  
press the Volume (+/-)/Scroll (Up/Down)  
control to select it; the Playlist Manager  
menu will appear.  
1
4
3
2
Select CREATE A NEW PLAYLIST using the  
Volume (+/-)/Scroll (Up/Down) control, then press  
the Volume (+/-)/Scroll (Up/Down) control to select  
it; the Create Playlist menu will appear.  
NOTE: Each time you create a new playlist, the  
player will arrange a new number of playlist, i.e. the  
first playlist is “PLY000”, the second “PLY001”, etc.  
Navigate through the folders and select the first song  
for the playlist as described on page 17. When the  
song is highlighted, press the Volume (+/-)/Scroll  
(Up/Down) control 1 to add it. After the track is  
added, the highlighter will skip back to the first track  
of the folder/album. Repeat this step until all desired  
tracks are added. Press the (Power On/Off)/M (Main  
Menu) button 2 to return to the Main Menu and exit  
the playlist setting.  
NOTE: A track can be added as many times as  
desired.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
OPERATION (CONTINUED)  
PLAYING A PLAYLIST  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Menu will appear on the screen.  
Select PLAYLISTS using the Volume  
(+/-)/Scroll (Up/Down) control, then press  
the Volume (+/-)/Scroll (Up/Down) control to  
select it; the Playlist menu will appear.  
1
4
3
2
Select  
a
desired playlist using the Volume The “Now Playing Track Menu” will appear  
(+/-)/Scroll (Up/Down) control 1, then press the  
Play/Pause ®p button 2 to start playback. OR  
Press the Volume (+/-)/Scroll (Up/Down) control 1.  
Then you can use the Volume (+/-)/Scroll  
(Up/Down) control 1 to select the desired tracks  
inside the playlist. Press the Volume (+/-)/Scroll  
(Up/Down) control 1 to start playback of the desired  
tracks in the playlist.  
on the screen. Playback will continue until all  
tracks in the playlist have been played or the  
Stop X button has been pressed.  
NOTE: Before the unit starts to playback the  
tracks in the playlist, it may require several  
seconds to load the files.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
OPERATION (CONTINUED)  
MODIFYING A PLAYLIST (Adding or Deleting a Track)  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select PLAYLIST MANAGER using the  
Volume (+/-)/Scroll (Up/Down) control, then  
press the Volume (+/-)/Scroll (Up/Down)  
control to select it; the Playlist Manager  
menu will appear.  
3
Select MODIFY EXISTING PLAYLIST using the Volume (+/-)/Scroll (Up/Down) control,  
then press the Volume (+/-)/Scroll (Up/Down) control to select it.  
To add tracks, see steps 4a and 5a.  
To delete tracks, see steps 4b and 5b.  
CONTINUED ON THE NEXT PAGE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
OPERATION (CONTINUED)  
5a  
4a  
Navigate through the folders and select a song to  
add to the playlist as described on page 17. When  
the song is highlighted, press the Volume (+/-)/Scroll  
(Up/Down) control to add it. Repeat this step until all  
desired tracks are added.  
TO ADD: Select ADD TRACKS using the  
Volume (+/-)/Scroll (Up/Down) control, then  
press the Volume (+/-)/Scroll (Up/Down)  
control to select it. Select the desired playlist  
using the Volume (+/-)/Scroll (Up/Down)  
control, then press the Volume (+/-)/Scroll  
(Up/Down) control to select it.  
NOTES:  
Press the (Power On/Off)/M (Main Menu) button to  
return to the Main Menu when finished adding  
tracks in the playlist.  
A track can be added as many times as desired.  
1
5b  
4b  
2
Select a track to delete using the Volume (+/-)/Scroll  
(Up/Down) control 1, then press the Volume  
(+/-)/Scroll (Up/Down) control 1; “########” will  
replace the track name. Press and hold the Stop X  
button 2 for two seconds to confirm and the file will be  
deleted. Then it will return to highlight the first track of  
the playlist. Repeat this step to delete additional  
tracks. NOTE:When you are finished deleting tracks,  
press the (Power On/Off)/M (Main Menu) button to  
return to the Main Menu.  
TO DELETE: Select DELETE TRACKS  
using the Volume (+/-)/Scroll (Up/Down)  
control, then press the Volume (+/-)/Scroll  
(Up/Down) control to select it. Select the  
desired playlist using the Volume (+/-)/Scroll  
(Up/Down) control, then press the Volume  
(+/-)/Scroll (Up/Down) control to select it.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
OPERATION (CONTINUED)  
DELETING A PLAYLIST  
2
1
To turn the unit on, press the (Power  
On/Off)/M (Main Menu) button; “Welcome”  
followed by “Memorex” will appear briefly and  
then the Main Menu will appear on the screen.  
Select PLAYLIST MANAGER using the  
Volume (+/-)/Scroll (Up/Down) control, then  
press the Volume (+/-)/Scroll (Up/Down)  
control to select it; the Playlist Manager  
menu will appear.  
1
4
3
2
Select a Playlist to delete using the Volume  
(+/-)/Scroll (Up/Down) control 1, then press the  
Volume (+/-)/Scroll (Up/Down) control 1;  
“########” will replace the playlist name. Press  
and hold the Stop X button 2 for two seconds to  
confirm and the playlist will be deleted. Repeat this  
step to delete additional playlists. NOTE:When  
you are finished deleting playlists, press the  
(Power On/Off)/M (Main Menu) button to return to  
the Main Menu.  
Select DELETE EXISTING PLAYLIST using  
the Volume (+/-)/Scroll (Up/Down) control,  
then press the Volume (+/-)/Scroll  
(Up/Down) control to select it; the Playlist  
menu will appear.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
OPERATION (CONTINUED)  
ADJUSTING THE BACKLIGHT SETTING  
2
1
While in the Main Menu, select SETTINGS Select BACKLIGHT using the Volume/  
using the Volume (+/-)/Scroll (Up/Down) Navigation control, then press the Volume/  
control, then press the Volume (+/-)/Scroll Navigation control to turn it on or off. Turning  
(Up/Down) control to select it; the Settings it on will turn on the backlight for 20 seconds  
menu will appear.  
whenever a button is pressed, which will  
help you view the screen in dark areas.  
ADJUSTING THE CONTRAST  
2
1
While in the Main Menu, select SETTINGS Select CONTRAST using the Volume/ Navigation  
control, then press the Volume/ Navigation  
control to select it. Set the desired contrast using  
the Volume (+/-)/Scroll (Up/Down) control.  
using the Volume (+/-)/Scroll (Up/Down)  
control, then press the Volume (+/-)/Scroll  
(Up/Down) control to select it; the Settings  
menu will appear.  
NOTE: To return to the Main Menu, press the (Power On/Off)/M (Main Menu) button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
OPERATION (CONTINUED)  
ADJUSTING THE EQUALIZER SETTING  
2
1
While in the Main Menu, select SETTINGS  
using the Volume (+/-)/Scroll (Up/Down)  
control, then press the Volume (+/-)/Scroll  
(Up/Down) control to select it; the Settings  
menu will appear.  
Select EQUALIZER using the Volume/  
Navigation control, then press the Volume/  
Navigation control to select it.  
1
4
3
2
3
GRAPHIC EQ: To make your own EQ settings,  
select the GRAPHIC EQ using the Volume (+/-  
PRESET EQ: Select the desired preset EQ  
(Normal, Bass Boost, Rock, Jazz, Classical  
or Pop) using the Volume (+/-)/Scroll  
(Up/Down) control, then press the Volume  
(+/-)/Scroll (Up/Down) control to select it  
and return to the SETTINGS menu.  
)/Scroll (Up/Down) control 1, then press the Volume  
(+/-)/Scroll (Up/Down) control 1 to select it. Select  
the control to adjust using the Skip/Search m 2 or l  
3 button, then adjust using the Volume (+/-)/Scroll  
(Up/Down) control 1. Press the Volume (+/-)/Scroll  
(Up/Down) control 1 when finished and return to the  
SETTINGS menu.  
NOTE: To return to the Main Menu, press the (Power On/Off)/M (Main Menu) button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
OPERATION (CONTINUED)  
SETTING THE POWER SAVING OPTION  
2
1
This option is useful to set lower to save Select POWER SAVING using the Volume/  
battery life. While in the Main Menu, select Navigation control, then press the Volume/  
SETTINGS using the Volume (+/-)/Scroll Navigation control to select it. Set the  
(Up/Down) control, then press the Volume desired power saving time using the Volume/  
(+/-)/Scroll (Up/Down) control to select it; Navigation control, then press the Volume/  
the Settings menu will appear.  
Navigation control.  
NOTE: The power saving time’s function is to turn off the unit automatically while in the  
Stop mode (and when no buttons are pressed). You can select the following power saving  
times: Disable (will not turn off automatically), 1 min, 2 mins, 5 mins or 10 mins (will turn  
off automatically after 1 minute, 2 minutes, 5 minutes or 10 minutes).  
REFRESH INDEX  
The player automatically looks for new files when it starts up. Should you  
suspect that the player has not recognized a file which you have added then the  
1
“Refresh Index” option will initiate a complete re-indexing of all the material on  
the hard drive. While in the Main Menu, select SETTINGS using the Volume (+/-  
)/Scroll (Up/Down) control, then press the Volume (+/-)/Scroll (Up/Down) control  
to select it; the Settings menu will appear. Select REFRESH INDEX, then press  
the Volume (+/-)/Scroll (Up/Down) control to start the refreshing of the index.  
NOTE: Once the re-indexing process has started, no button will function until the  
process is completed. The time for the process will vary depending on the  
amount of files installed. Once completed, the unit will return to the Main Menu  
automatically.  
NOTE: To return to the Main Menu, press the (Power On/Off)/M (Main Menu) button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
OPERATION (CONTINUED)  
ABOUT  
The “About” menu displays information describing the  
revision of the firmware loaded in the unit and the maximum  
capacity of the hard drive.  
1
While in the Main Menu, select SETTINGS using the Volume  
(+/-)/Scroll (Up/Down) control, then press the Volume (+/-  
)/Scroll (Up/Down) control to select it; the Settings menu will  
appear. Select ABOUT, then press the Volume (+/-)/Scroll  
(Up/Down) control to view the information of this unit.  
RESET  
If the player is not working properly or the buttons do not  
function when pressed (and the Hold button is in the Unlock  
position), you can reset the unit. To reset the unit, use a  
sharp object (such as a paper clip or ballpoint pen), insert in  
the hole and press the Reset button.  
1
NOTE: To return to the Main Menu, press the (Power On/Off)/M (Main Menu) button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
TROUBLESHOOTING GUIDE  
If you experience a problem with this unit, check the chart below before calling for service.  
PROBLEM  
POSSIBLECAUSE  
SOLUTION  
PLAYER will not  
turn on.  
Battery weak or dead.  
Recharge the built-in battery  
(see page 7).  
Power the unit using the supplied  
AC adapteror see page 39 for  
customer service.  
PLAYER will not HOLD switch is set to Hold.  
respond to any  
Slide up to release hold.  
buttons pressed.  
There is no sound Headphone plug not inserted correctly.  
Check that the headphone plug is  
properly inserted.  
from  
the  
headphones.  
Volume is set to minimum.  
Check that the volume level is not  
at its lowest setting.  
Files  
are  
not Files in the playlist are inunsupported  
Use the record function in  
MusicMatch to encode the files into  
MP3 or WMA formats and then  
save them to the playlist.  
appearing in the formats.  
playlist when I try  
to download to the  
unit.  
Display  
shows RAM Test Failure.  
Press the Reset button or see page  
39 for customer service.  
Display  
shows HDD Test Failure.  
Press the Reset button or see page  
39 for customer service.  
Boot Failure.  
Display shows  
Press the Reset button or see page  
39 for customer service.  
No sound, or WMA  
files with DRM  
can't playback.  
Files copied & pasted, or incorrectly  
downloaded.  
See pages 15-16.  
Download uncorrupted files.  
MP3 or WMA files are corrupted.  
Damaged USB cable.  
Download failure.  
Replace cable.  
Securely connect USB cable.  
The USB cable is not securely connected.  
The computer is not  
recognizing the unit.  
Install driver and/or see pages 8-14  
for compatibility.  
Driver not installed or computer not  
compatible.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
SPECIFICATIONS  
PC System Requirements  
Pentium Class 300MHz processor or better  
Windows® 98/Me/2000/XP  
96 MB RAM (32 MB for Win98)  
50 MB hard drive space  
Video display card  
Soundcard  
Microsoft Internet Explorer 5.0 or later  
CD-ROM drive  
USB host socket  
Audio Specifications  
Audio S/N (signal-to-noise ratio): 60 dB  
Audio THD (total harmonic distortion): less than 0.1%  
Frequency response: 20Hz – 20kHz  
Headphone Output: 12 mW, 16 Ohms  
File Support  
MP3  
WMA: Windows Media Audio (WMA file with DRM)  
Bit Rate: 8kbps-320kbps  
Tag Info: ID3 Tag  
General Dimensions: 97 x 63 x 21 mm  
Weight: 92 g  
Battery: Lithium Polymer Battery  
LCD: Full Graphic with Backlight  
Language: English  
USB: USB 2.0  
Built-in Memory: 1.5 GB  
Max. Playtime: Approx. 8 hours (Battery fully charged)  
Specifications are subject to change without notice.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
FOR FIRMWARE UPGRADE, PLEASE VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
TO CHECK IF THERE IS NEW FIRMWARE AVAILABLE.  
FOR ADDITIONAL SET-UP OR OPERATING ASSISTANCE,  
PLEASE VISIT OUR WEBSITE AT  
WWW.MEMOREXELECTRONICS.COM  
OR CONTACT CUSTOMER SERVICE AT (954) 660-7100.  
PLEASE KEEP ALL PACKAGING MATERIAL FOR AT LEAST 90  
DAYS IN CASE YOU NEED TO RETURN THIS PRODUCT TO YOUR  
PLACE OF PURCHASE OR TO MEMOREX.  
FOR PARTS AND ACCESSORIES, CONTACT FOX INTERNATIONAL  
AT 1-800-321-6993.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
Memcorp, Inc.  
Weston, FL  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Land Pride Brush Cutter RCD1884 User Manual
Lexar Media CD Player LDP 400 User Manual
Lowrance electronic Fish Finder LMS 240 User Manual
Lucent Technologies Answering Machine AS60 User Manual
Magnadyne Portable DVD Player MV855 User Manual
Magnavox Flat Panel Television 42MF231D 331D User Manual
Makita Impact Driver 6932FD User Manual
Manitowoc Ice Ice Maker K00049 User Manual
McCulloch Chainsaw 41BY44NQ077 User Manual
Metra Electronics Car Stereo System AW 200GM User Manual