DISHWASHER: MDB/C-2
®
SAFETY INSTRUCTIONS
LOADING
Page 1
Pages 2-3
Page 4
Installer: Please leave this manual with
this appliance.
Consumer: Please read and keep this
manual for future reference. Keep sales
receipt and/or cancelled check as proof of
purchase.
PORTABLE DISHWASHER
DISHWASHING ESSENTIALS
CONTROLS AT A GLANCE
OPERATING TIPS
Model Number
Page 5
_______________________________
Serial Number
Pages 6-7
_______________________________
Date of Purchase
Page 7
Page 8
Page 8
_______________________________
SPECIAL CARE ITEMS
CARE AND CLEANING
In our continuing effort to im-
prove the quality and perfor-
mance of our appliances, it may
be necessary to make changes
to the appliance without revising
this guide.
Pages 9-10
Page 11
If you have questions, call:
1-800-688-9900 (USA)
1-800-688-2002 (CANADA)
1-800-688-2080 ( U.S. TTY for
hearing or speech impaired)
(Mon.-Fri., 8 am-8 pm Eastern Time)
Page 12
Page 24
GUIá DEL USUARIO
For service information, see page 11.
Part No. 6 917071 A
h t t p : / / w w w . m a y t a g . c o m
99002462
Litho U.S.A .
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING
General
Recommended Loading
For best dishwashing results follow the
guidelines below to determine the best
arrangement for your items.
Before You Start
(Rack features vary by model)
➢
Don’t prerinse. Simply scrape off any
bones or large food particles.
Recommendations
➢ Place all items in the racks so they
➢
If connected to a food waste disposer,
make certain the disposer is empty
before starting the dishwasher.
are separated and facing center.
➢
Items can be centered behind a single
tine or loaded at an angle to maximize
space.
➢
➢
Scrape off tomato-based food soils
(see page 8).
➢
➢
Load items so they do not rest over the
top of the wash tower.
Remove certain foods (such as mus-
tard, mayonnaise, lemon juice, vine-
gar, salt or dressings) from stainless
steel flatware as soon as possible.
These foods may cause rusting and
pitting if allowed to remain in contact
with the surface for an extended peri-
od of time.
Avoid blocking the upper and lower
spray arms by not allowing items to
extend beyond the racks.
against the outer rack or to the right to rest
on top of light items. Do not load items on
top of the wire.
Upper Rack
The Stack-Rack (select models) on the right
side of the upper rack folds up or down for
loading flexibility. Fold it down to hold long-
handled knives, spatulas and spoons or
short items like cups or juice glasses. Fold it
up for taller items like glasses, bowls, plates,
etc.
The Vari-Lock™ Snugger (select models)
on the left secures lightweight items in
place. It can be adjusted by grasping the
wavy wire and rotating it left to snug items
The wavy wire on the Vari-Lock™
Snugger (select models) and the Stack-
Rack (select models) is designed to hold
stemware in place. Taller stemware will fit
better on the right side as the upper rack is
deeper on this side.
10 Place Settings
Glasses, cups, stemware, light-weight
plastics, small plates, bowls, pans, long-
handled utensils etc. can be loaded in this
rack. Do not load glasses over the tines.
The Adjustable Upper Rack can be To lower the rack:
ADJUSTABLE UPPER RACK
(Select models)
raised to accommodate taller plates, plat-
➢
➢
Pull the rack fully out.
ters, pans, etc. loaded in the lower rack.
Grasp the handle on the rear right side
of the rack.
To raise the rack:
➢
➢
Pull the rack fully out.
➢ Lift and push the rack slightly back to
lock back down into place.
Grasp the handle on the rear right side
of the rack.
NOTE:
➢
Lift and pull the rack slightly forward to
lock up into place.
❚ Face soiled surfaces towards the
center of the dishwasher.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING (Continued)
Lower Rack
A variety of large items such as dinner
plates, mixing bowls, pots and pans and
baking dishes can be loaded in this rack.
Back
3 saucers are
Tall items such as bakeware and large
platters can be placed on the left side or
across the back of this rack.
loaded on the
rack under the
Stack-Rack Shelf
(select models)
10 Place Settings
Positioning the Fold-Away™ Tines (select Convertible Tines (select models) in the
models) flat in the back, left corner pro- back, right corner can be adjusted to pro-
vides convenient loading space for large, vide narrow spacing for loading plates or
bulky items like pots and pans or mixing wide spacing for loading deep bowls, pots
bowls.
or pans. Flip tines up for narrow spacing or
down for wider spacing.
Back
NOTE:
With the Stack-Rack (select models) shelf
raised, thin items like cookie sheets or
pizza pans may be placed along the left
side. With the shelf down, two levels of
glasses and cups can be loaded.
❚ Avoid resting items over the cen-
ter wash tower.
rack for loading miscellaneous items and
utensils. This is also a safe place
to load sharp knives and
REMOVABLE UTENSIL
BASKET (Design varies by model)
For best cleaning results, prevent items
from nesting together by placing some
items in the basket with handles up and
some with handles down. Load knives,
handles up, through the slots in the hinged
covered section(s) (when closed).
pointed items.
SPLIT & FIT UTENSIL
BASKET (Select models)
Be sure that thin, finely pointed items do
not extend through the basket.
This could block the lower
wash arm.
The split silverware basket can be separat-
ed and placed in several locations in the
bottom rack. Hold the basket firmly along
the sides. Follow the unlock direction
arrows imprinted on the basket and slide
the basket apart until it
Small, lightweight items
like baby spoons and
plastic measuring spoons
should be placed in the
section(s) with the hinged
cover(s).
splits into two.
Load flatware
and utensils into
both sections or just
one, depending upon
ODDS & ENDS BASKET
(Select models)
3
Use this supplemental basket in the upper
your load.
Download from Www.Somanuals.com. All Manuals Search And Download.
plastic rack stop, push inward
(towards the rack) on the ridged area
of the rack stop. The rack stop will
snap open and can be easily removed
by pulling straight out. Take care to
support the track while removing rack
stops.
Removing the Upper
Rack
The upper rack can be removed when tall
or oversized items need to be loaded into
the lower rack.
➢ Roll the rack all the way out of the
track and remove from the dishwash-
er.
TO REMOVE:
➢ Roll the upper rack 1/3 to 1/2 of the
Rack
Stop
way out.
➢ Reverse the above procedure to
replace the upper rack into the dish-
washer.
➢ Remove the plastic rack stop from the
end of each track. To remove each
PORTABLE DISHWASHER
Connecting a portable
1. Turn on the faucet at the sink until the 7. Pull the electrical cord from the recess. 3. Push the connector and hoses back
water runs hot. Turn off the faucet.
Plug it into a properly grounded outlet.
into the cabinet recess.
2. Pull the connector from the recess in 8. Select the proper cycle and options for 4. Unplug the electrical cord and push it
the back of the dishwasher.
the load and start the dishwasher.
back into the cabinet recess.
3. Press down on the thumb release and
lift the connector onto the faucet.
Thumb Release
Disconnecting a
Portable
Faucet
Connector
4. Remove pressure from the thumb
release and tug slightly on the connec-
tor to be sure it is securely in place.
1. Be sure to turn the water supply off and
press the pressure release button
BEFORE removing the connector.
Pressure
Release
Button
5. Turn the hot water on full force.
6. Check that the sink drain is open so
water from the dishwasher can drain
properly.
2. Press down on the thumb release and
remove the connector from the faucet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
DISHWASHING ESSENTIALS
To check the incoming water temperature, Before starting the dishwasher, turn on the
Hot Water
turn on the hot water faucet nearest the hot water faucet and let it run until the
dishwasher and let it run into a glass in the water is hot. This assures that the initial fill
sink. Place a candy thermometer in the of water is hot.
glass and check the temperature once it
has stopped rising. If the temperature is
below 120° F (49° C), have a qualified per-
For optimal cleaning and drying
results, hot water is necessary. The
incoming water temperature should be
120-140° F (49-60° C) to properly acti-
vate the detergent and melt greasy food
soils.
son raise the water heater thermostat set-
ting.
ing. Too much detergent can cause per- In extremely hard water conditions (13
Detergent
manent etching/cloudiness.
grains per gallon or more*), it is difficult to
achieve good results with any dishwasher.
A mechanical water softener may be nec-
essary to improve water quality, detergent
effectiveness, and protect the dishwasher
parts from the damage that hard water can
cause.
Use a detergent designed specifically for
use in an automatic dishwasher. Be sure it
is fresh and stored in a cool, dry place (not
under the sink).
The amount of detergent to use is deter-
mined by the hardness of the water and
soil level of the load. Refer to the following
chart for detergent usage recommenda-
tions.
RECOMMENDED AMOUNT
Do not use detergent with Rinse Only.
Leave the detergent lid open when running
Rinse Only.
Too little detergent results in poor cleaning,
hard water filming/spotting and poor dry-
*Your local water utility or state uni-
versity extension service can tell you
the degree of water hardness in your
area.
Water Hardness*
Soil Level
Light Soil
Normal Soil
Heavy Soil
Detergent Amount**
(per cup dosage)
Soft (0-4 gpg)
5 teaspoons
6 teaspoons
8 teaspoons
** Add recommended amount of
detergent to both compartments for
AutoClean, Heavy or Normal wash
cycles, and to the main cup only for
the Light wash cycle.
Medium (5-9 gpg)
Hard (10-12 gpg)
Light Soil
Normal Soil
Heavy Soil
7 teaspoons
8 teaspoons
10 teaspoons
Light Soil
Normal Soil
Heavy Soil
9 teaspoons
10 teaspoons
12 teaspoons
The clear window in the center of the dis- opening. Replace the cap and turn it clock-
penser cap allows you to see if there is wise.
Rinse Aid
rinse aid in the reservoir. When the window
Use the LESS setting for soft water and
is colored, there is rinse aid in the dis-
the MORE setting for hard water. Set the
penser. When the window becomes clear,
cap anywhere between these amounts as
it is time to refill the dispenser. Check the
needed.
Regular use of a rinse aid improves
drying, reduces spotting and filming,
and reduces moisture left on the dish-
washer interior.
dispenser monthly.
Your dishwasher features an automatic
rinse aid dispenser located near the deter-
gent cups in the door.
To add rinse aid to the dispenser, turn the
cap counterclockwise to open. Remove
the cap and pour liquid rinse aid into the
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AT A GLANCE
HEAVY WASH
RINSE ONLY
Cycles and Water Usage
AUTO CLEAN (Select models)
Long cycle for heavy food soils. 10 gallons. Rinses dishes being held until there is a
full load. Controls odors. 2 gallons.
NORMAL WASH
Manufacturer’s recommended cycle choice
for all day-to-day soil types.
Medium cycle for average food soils.
NOTE:
Depending on the number of fills, water
Normal dishloads vary from day to day.
Auto Clean is recommended because it
selects the number of fills and wash time
best suited for the soil level of each load.
Depending on the number of fills required
water usage ranges from 4 to 10 gallons.
usage ranges from 4 to 8 gallons.
❚ Cycle times shown in the numerical
display (select models) increase or
decrease, based on each load’s
soil level, water temperature and
selected options.
LIGHT WASH
Short cycle for light food soils. Depending
on the number of fills, water usage ranges
from 4 to 6 gallons.
final rinse cycle. If necessary, the heating results in hard water situations. The extra
element will turn on and the cycle will be rinse is already built into the cycle when
Options
TOUGH SCRUB™ or TOUGH
SCRUB™ PLUS (Select models)
extended to heat water to the proper tem- Heavy Wash is selected
.
perature.
HEATED DRY
Select AccuTemp™ with any cycle (except
Select Tough Scrub™ or Tough Scrub™
Plus when washing loads with hard-to-
remove food soils. Tough Scrub™ or
Tough Scrub™ Plus can be selected with
any cycle (except Rinse Only). Depending
on which cycle is being used, selecting this
option adds fills, heat and/or wash time to
the wash cycle.
Rinse Only) to assure proper hot water Select Heated Dry to turn on the heating
temperature and to enhance drying results. element during dry for enhanced drying
results. When Heated Dry is not selected,
SANITIZE (Select models)
towel drying of some items such as plastic
and teflon may be necessary and more
moisture may be noticed adhering to the
dishwasher interior. With either dry option,
it is normal to notice vapor escaping from
the door vent.
Select Sanitize with Auto Clean (select
models), Heavy, Normal, or Light Wash
to sanitize dishware. At the end of the
cycle, when the cycle monitor recognizes
that the proper conditions have been met,
the SANITIZED light illuminates.
For baked-on, dried-on soils, select Heavy
Wash along with the Tough Scrub™ or Tough
Scrub™ Plus option.
DRAIN/OFF
ACCUTEMP (Select models)
AccuTemp™ provides a water temperature Select Extra Rinse to add a rinse to the
EXTRA RINSE (Select models)
To drain the dishwasher and then turn it off,
press Drain/Off once. Press Drain/Off twice
to turn the dishwasher off without draining.
check in the main wash and also in the cycle. An extra rinse helps to improve
The CLEAN light illuminates at the end of
the cycle and remains lit until the door
has been open for 30 seconds continu-
ously.
The CLEAN and SANITIZED (select mod-
els) indicator lights will not reilluminate
after a power failure until after the next
cycle is run.
Indicator Lights
nates at the end of the cycle when condi-
The SANITIZED (select models) light illumi-
tions have been met to achieve sanitization.
The DRY light illuminates during the entire
dry period and goes out when the cycle is
completed.
NOTE:
The WASH light illuminates during all rinse
and wash portions of the cycle.
❚ When Sanitize is selected, cycles
are monitored to assure sanitiza-
tion. Unusually low water temper-
ature will prevent the sanitization
protocol from being satisfied and
the SANITIZED light will not illu-
minate at the end of the cycle.
The HEATING DELAY light illuminates
when the cycle is being extended to heat
the water.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS AT A GLANCE (Continued)
Delay/Resume
automatically start the cycle at a later time,
such as during off-peak hours for reduced
energy cost or to reduce daytime heat
buildup in the home.
NOTE:
NOTE:
The Delay/Resume option can be used to
❚ If Delay/Resume is chosen with-
❚ This option does not lock the
door, only the dishwasher con-
trols.
out selecting a cycle and/or
options, the dishwasher will
select the last cycle used. (It will
not remember the Rinse Only
cycle.)
SETTING THE CONTROL LOCK:
TO SET UP A DELAY:
1. Press the
pad for three seconds.
1. Select the appropriate cycle and
2. An indicator light above the pad will
illuminate when the controls are
locked.
TO CANCEL A DELAY:
options for the load.
Wait at least 2 seconds, then press the
Delay/Resume pad again. The indicator
light will go out and the cycle will start or
resume immediately.
2. Press the Delay/Resume pad until the
desired amount of delay time (1 to 9
hours) is selected. The delay time will
begin counting down when the pad is
released.
TO CANCEL:
1. Press the
pad for three seconds.
2. The indicator light will go off.
Control Lock Option
3. The Delay/Resume indicator light will
remain lit until the delay time has
counted down.
The control touchpads can be locked to
prevent unwanted use. If this feature is
activated between cycles, the dishwasher
cannot be operated until the controls are
unlocked. If desired, the controls can be
locked after a cycle or delay has started.
NOTE:
❚ If a cycle or option pad is pressed
after the controls have been
locked, the indicator light above
the Control Lock pad will flash
five times.
4. The cycle will automatically start as
soon as the delay time expires.
OPERATING TIPS
4. Close and latch the door.
Starting the Dishwasher
NOTE:
❚ If Delay/Resume was pushed,
push it again to restart the dish-
washer.
1. After loading the dishwasher and
adding detergent, close the dishwash-
er by pressing the door until the latch
clicks.
❚ Extended interruption of the wash
cycle is not recommended.
5. After five seconds, the cycle resumes
automatically at the point of interrup-
tion.
2. To start the dishwasher, firmly press
the desired cycle and options pads.
After a pause, the fill will begin. To pre-
vent unplanned cycle or option
changes, these selections are “locked
in” after 1 minute.
Adding a Forgotten Item
For best cleaning, the forgotten item
should be added early in the cycle.
NOTE:
1. Press the Delay/Resume pad or
❚ If a cycle or option pad is pressed
after the controls have been
“locked in”, the indicator light
above the Control Lock pad will
flash five times.
unlatch the door.
2. Wait for the water circulation to stop.
3. The indicator lights for the selected
cycle and options will glow.
3. Open the door and add the item.
4. To cancel an option, press the pad
again. To cancel a cycle, press the
Drain/Off pad.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL CARE ITEMS
Most tableware, cookware and flatware can safely be washed in your dishwasher. If you have any doubts about an item, check
with the manufacturer.
Material
Dishwasher Safe?
Special Informatiion
High water temperature and detergents may affect finish.
Seasoning will be removed, and iron will rust.
Yes, except anodized.
No
Aluminum
Cast Iron
China/
Stoneware
Always check manufacturer’s recommendation before washing. Antique, hand-paint-
ed or over-the-glaze patterns may fade. Gold leaf may discolor.
No, if antique or hand-
painted.
Always check manufacturer’s recommendation before washing. Some types of lead-
ed crystal may etch with repeated washings.
No, if antique or delicate
crystal.
Crystal
Not recommended.
Yes
Furnace Filters
Glass
May leave a dingy deposit or stain on dishwasher interior.
Milkglass can yellow with repeated dishwasher washing.
No
Will discolor.
Gold-Plated
Flatware
No
Pewter, Tin
Plastics
Always check manufacturer’s recommendation before washing. Plastics vary in their
capacity to withstand high water temperatures and detergents. Disposable plastic
items are not dishwasher safe for this reason.
Yes, top rack.
Stainless Steel
Run a Rinse Only cycle if not washing immediately. Prolonged contact with foods con-
taining salt, vinegar, milk products or juice could damage finish.
Yes
Always check manufacturer’s recommendation before washing. Run a Rinse Only
cycle if not washing immediately. Prolonged contact with food containing salt, acid or
sulfide (eggs, mayonnaise and seafood) could damage finish. Commercial “darken-
ing” may be removed by detergent.
No, if has commercial
“darkening”.
Sterling Silver or
Silverplate
Wooden Items
Wood may warp, crack or discolor.
No
CARE AND CLEANING
For moderate to heavy soil, clean with Bon
Interior
Exterior
Ami*, using a soft cloth or damp sponge.
Rinse and dry. To restore luster and to remove
streaks, follow with Stainless Steel Magic
Spray*.
The dishwasher interior is normally self-clean-
ing. Periodically check the bottom of the dish-
washer tub to see if any large particles have
not gone through the strainer portion of the
module.
The front of the dishwasher can be cleaned
with a soft damp cloth and liquid spray clean-
er. Do not use abrasive powders or cleaning
pads.
For discoloration, wipe with Cameo
Stainless Steel Cleaner*, using a damp
sponge or soft cloth. Rinse immediately and
dry. To restore luster and to remove streaks,
follow with Stainless Steel Magic Spray*.
Stainless Steel Care and Cleaning (select
models)
Wipe the edge of the inner door liner to remove
any food soil splashes which occurred during
loading.
➢
Do not use a cleaning product containing
chlorine bleach.
The color from some tomato-based food soils
has been known to occasionally adhere to
today's dishwasher tubs, causing temporary dis-
coloration.
➢
Always wipe with the grain of the stain-
less steel.
Storage/Moving
For daily cleaning and light soil, use a soft
cloth or sponge and one of the following: Mild
detergent and water, a solution of white vinegar
and water, Formula 409 Glass and Surface
Cleaner* or a similar multi-surface cleaner.
Rinse and dry. To polish and to help prevent
fingerprints, follow with Stainless Steel Magic
Spray* (part No. 20000008)**.
Fill both detergent cups with a fresh-scented
dishwasher detergent or baking soda and
select the Normal Wash cycle. Allow the dish-
washer to complete the cycle. Then turn the
water supply off and drain the dishwasher. To
drain, press the Drain/Off pad once. Operate
the drain twice to ensure most of the water is
removed. Last, disconnect the electrical supply
and prop open the door. (See Important Safety
Instructions, #14, page 1).
When washing a load of dishes soiled with
tomato sauce:
➢
Scrape excess tomato-based food soils off of
dishes, prior to loading. Do not prewash the
dishes, however.
➢
Run the Heavy Wash cycle.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU CALL
CHECK THESE POINTS TO HELP SAVE YOU TIME AND MONEY.
Dishwasher Will Not Fill:
•
•
•
•
•
•
•
Be sure door is latched securely.
Be sure the water is turned on.
Check that the pad is properly selected for a cycle.
Allow time to pause before filling.
Check your home‘s circuit breaker or fuse box.
Check inlet hose for a kink.
Check water valve inlet for sediment and clean if necessary.
Dishwasher Will Not Drain/Water In Tub Bottom:
•
•
•
•
•
•
If hooked up to a food waste disposer, be sure the knock-out is removed from the disposer inlet.
Be sure the drain hose is elevated at least 32” so water cannot siphon back into the tub.
Check for food obstruction in the drain or disposer.
Check drain hose for a kink.
Check your home‘s circuit breaker or fuse box.
Check that the cycle is completed.
Dishwasher Adds Water at END of Cycle:
•
This is normal. The Auto Clean (select models) sensor in the pump must stay submerged so a short fill of water is added after the cycle’s
last drain.
Detergent Cup Is Not Empty:
•
Check that the cycle is completed.
•
•
Be sure dispenser is not blocked by a dish or utensil.
Use fresh detergent stored in a cool, dry place.
Dishwasher Seems Noisy:
•
•
•
•
•
•
•
A water valve hiss during fill is normal.
Water circulation sounds are normal.
A thumping sound may be a wash arm bumping an item that is extending beyond the racks.
Chopping or grinding sounds may be heard during drain as the internal food disposer chops hard items like fruit seeds, nuts, etc.
Humming during the drain is normal.
A snap noise is the detergent cup lid hitting the door liner when the dishwasher door is opened at the end of the cycle. This is normal.
Proper installation affects the noise level.
Cycle Takes Too Long (Heating Delay Light Stays On):
•
•
Tough Scrub™ or Tough Scrub™ Plus (select models) or Sanitize (select models) has been selected and the cycle is extended to heat water.
Check to see that the incoming water temperature is 120-140° F (49-60° C).
Dishwasher has an Odor:
•
•
•
•
Run dishes being held in the dishwasher through a Rinse Only cycle.
Many dishwashers have a “new” smell when first installed. This will dissipate with use.
Dishwasher may not be draining properly. (See “Dishwasher Will Not Drain” section.)
For a strong odor, place baking soda in both sides of the detergent cup. Select Light Wash and allow the water to circulate for about 10 min-
utes. Interrupt the cycle by unlatching the door and let it stand overnight. Restart the dishwasher by latching the door and allow it to com-
plete the cycle. A commercial dishwasher cleaning product such as Jet-Dry Dishwasher Cleaner* can also be used.
Dishwasher Leaks:
•
•
Check that the dishwasher is level. (Refer to the Installation Instructions.)
Suds can cause the dishwasher to overflow. Measure the detergent carefully and use only detergents designed for use in a dishwasher. Less
detergent is needed in soft water. Try another brand if sudsing continues.
•
•
Follow directions closely on how to add a forgotten item (pg. 7).
Be sure the Rinse Aid lid is securely attached and not leaking.
Display Time Suddenly Drops or Increases by Several Minutes (select models):
•
This is normal when the Auto Clean cycle (select models) is selected and the dishwasher decides to skip or add a drain and refill.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Glasses Are Cloudy/Spotted:
•
•
•
•
Select Extra Rinse (select models).
Check water temperature. Incoming water should be 120°-140° F (49-60° C).
Always use a rinse aid.
Confirm that the cloudiness is removable by soaking the item in white vinegar for approximately 5 minutes. If removed, the problem is due
to hard water. Adjust detergent amount being used to match water hardness (pg. 5). Be sure detergent is fresh, stored properly and is a
high quality brand.
•
If cloudiness is not removable, it is etching. This is an erosion of the surface of the glassware and can be caused by water that is too hot,
from using too much detergent or by prewashing. Detergent needs food soil to act upon. If etching has occurred, the glassware is perma-
nently damaged. To prevent further etching, adjust the detergent amount to match the water hardness, stop prewashing, and be sure incom-
ing water temperature is not greater than 140° F (60° C). Use water heating options only when incoming water temperature is below
120° F (49° C).
Food Soil Remains on Dishes:
•
•
•
•
•
•
•
•
•
•
Check water temperature (pg 5).
Run hot water at the sink before starting the dishwasher.
Select Tough Scrub™ or Tough Scrub™ Plus (select models).
Check water hardness and adjust detergent amount accordingly (pg. 5).
Use fresh detergent stored in a cool dry place.
Select proper cycle for the soil level.
Load items so they do not block the wash arms or center tower (pg. 2-3).
Load the utensil basket with some handles up and some down to prevent nesting.
Do not place glasses over tines.
Prior to loading, scrape off burnt on foods and wipe the starchy film from utensils used with pasta, rice and oatmeal. These soils require
more energy than the rest of the load to clean.
Items Washed In The Dishwasher Or The Dishwasher Tub Itself Are Stained/Discolored:
•
•
Aluminum utensils or pans can leave marks when they rub against other items. Leave a slight space between items.
Iron deposits in the water can leave a yellow, brown or orange film on dishes or the dishwasher tub. A filter may be needed, check with a
water treatment company. RoVer Rust Remover (part no. 057961)** can be used to remove rust. Do not use RoVer along with dishwasher
detergent. Fill both cups with RoVer and complete a Normal Wash cycle. Follow with a short wash cycle using dishwasher detergent.
Color from tomato sauces may adhere to the tub (pg. 8). If light staining has occurred, leave the door open to oxidize the stain away. For
removal of heavier stains, try a citric acid containing dishwasher cleaning product such as Glisten (part no. 18001017)**. Change dishwasher
detergent and be sure to use a dishwasher detergent that contains chlorine to better fight staining.
•
Items Not Properly Dried/Moisture Is Present On The Dishwasher Interior After The Dry Cycle:
•
•
•
•
•
•
•
•
•
Be sure Heated Dry is selected.
Water droplets may form on the inner door as part of the drying process.
Always use a rinse aid like Jet Dry* or Cascade Rinse Aid*.
Check water temperature (pg. 5).
Select Tough Scrub™ or Tough Scrub™ Plus (select models).
Increase detergent amount to match water hardness (pg. 5).
Load properly (pg. 2-3)
Plastic and teflon items are difficult to dry because the porous surface tends to collect water droplets. Towel drying may be necessary.
Glasses and cups with concave bottoms hold water and require towel drying.
Dishware is Chipped:
•
•
•
•
Load dishes according to instructions so they do not strike each other (pg. 2-3).
Washing antique china/crystal in the dishwasher is not recommended.
Do not load glasses over the tines.
Do not overload.
Sanitized Light Does Not Illuminate at the End of the Cycle (select models):
•
•
•
Sanitize was not selected.
Sanitization can only be achieved with the Auto Clean (select models), Heavy, Light or Normal wash cycles.
The incoming water temperature was too low, interfering with the dishwasher’s ability to achieve adequate water heating in the alloted amount
of time.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Dishwasher Warranty
What is Not Covered By These Warranties:
1. Conditions and damages resulting from any of the following:
a. Improper installation, delivery, or maintenance.
Full One Year Warranty
For ONE (1) year from the date of original retail pur-
chase, any part which fails in normal home use will
be repaired or replaced free of charge.
b. Any repair, modification, alteration, or adjustment not authorized by the
manufacturer or an authorized servicer.
Limited Second Year Warranty
After the first year from the date of original retail pur-
chase, through the second year, parts which fail in nor-
mal home use will be repaired or replaced free of
charge for the part itself, with the owner paying all other
costs, including labor, mileage and transportation.
c. Misuse, abuse, accidents, or unreasonable use.
d. Incorrect electric current, voltage, or supply.
e. Improper setting of any control.
2. Warranties are void if the original serial numbers have been removed,
Limited Third Through Fifth Year Warranty
After the second year from the date of original retail
purchase, through the fifth year, all of the following
components which fail in normal home use will be
repaired or replaced free of charge for the part itself,
with the owner paying all other costs, including labor,
mileage and transportation. These components
include:
Any parts of the Jetclean® system for all models,
including the complete power module assembly, soil
sensor, center spray nozzle, spray arms, top wash
arm hose, and motor.
altered, or cannot be readily determined.
3. Products purchased for commercial or industrial use.
4. The cost of service or service call to:
a. Correct installation errors.
b. Instruct the user on the proper use of the product.
c. Transport the appliance to the servicer.
5. Consequential or incidental damages sustained by any person as a result of
any breach of these warranties. Some states do not allow the exclusion or
limitation of consequential or incidental damages, so the above exclusion
may not apply.
Computer Touch Control models only – any micro-
processor and touch pad assemblies.
All models against rust, including exterior cabinet
and front panels of portable models, the exterior front
panels and accessory side panels of built-in models,
and premium DuraGuard® coated racks (available on
select models).
To Receive Warranty Service
❚ To locate an authorized service company in your area contact the Maytag
dealer from whom your appliance was purchased or call Maytag Appliances
Sales Company, Maytag Customer Assistance at the number listed below.
Should you not receive satisfactory warranty service, please call or write:
Full Twenty-Year Warranty
From the date of original purchase through the twen-
tieth year, should the tub develop a water leak in nor-
mal home use, the dishwasher itself will be replaced
FREE OF CHARGE.
Maytag Appliances Sales Company
Attn: CAIR® Center
P.O. Box 2370
From the date of original purchase through the twen-
tieth year, should the door liner develop a water leak
in normal home use, repair or replacement of the
door liner will be made FREE OF CHARGE.
Cleveland, TN 37320–2370
U.S.
CANADA
1-800-688-9900
1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech
impaired, call 1-800-688-2080.
PLEASE NOTE: These full warranties apply only
when the dishwasher is located in the United States
or Canada. Dishwashers located elsewhere are cov-
ered by the limited warranties only, including a limit-
ed warranty for parts which fail during the first year.
NOTE: When writing or calling about a service problem, please include the
following information:
a. Your name, address and telephone number;
b. Model number and serial number of your appliance ;
c. Name and address of your dealer or servicer and the date the appliance
was purchased;
d. A clear description of the problem you are having;
e. Water hardness, detergent brand and amount, water temperature and
cycle used;
Canadian Residents
These warranties cover only those dishwashers
installed in Canada that have been listed with
Canadian Standards Association unless the dish-
washers are brought into Canada due to transfer of
residence from the United States to Canada.
The specific warranties expressed above are the
ONLY warranties provided by the manufacturer.
These warranties give you specific legal rights, and
you may also have other rights that vary from state
to state.
f. Proof of purchase (sales receipt).
User’s guides, service manuals and parts information are available from Maytag
Appliances Sales Company, Maytag Customer Assistance.
MAYTAG • 403 West Fourth Street North • P.O. Box 39 • Newton, Iowa 50208
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|