ERRATA SHEET
MAX9850
Stereo Audio DAC with
DirectDrive Headphone Amplifier
REVISION A ERRATA
The errata listed below describe situations where the MAX9850 components perform differently than expected or dif-
ferently than described in the data sheet (this Errata corresponds to Rev 1 of the MAX9850 data sheet). This errata
sheet applies to all MAX9850 devices until further notice.
Description:
2
The MAX9850 data sheet states that the digital audio interface can operate in I S mode in addition to
left/right justified. After careful observation of actual part operation, it was found that data formatted using
2
the I S standard cannot be properly decoded by the MAX9850.
2
2
I S is a "catch-all" term used to generically describe many digital audio interfaces. In reality, I S is one of many
2
digital audio formats that can be used to send digital audio data to a decoder. I S is very similar to a mode
Maxim calls "Left Justified." See Figures 1 and 2.
Figure 1 shows digital audio data left justified. This audio format is identified by the MSB of the data word on
SDIN coinciding with the first BCLK transition after LRCLK changes state. Figure 1 shows left- and right-channel
data both with the SDIN MSB being clocked in on the first BCLK rising edge after the LRCLK transition.
MASTER MODE: S_WCI = 0, S_BCI = 0, S_DLY = 0, S_WS = 0
LRCLK(OUT)
SDIN
RIGHT
8
LEFT
14 13 12 11 10
15
9
7
6
5
4
3
2
1
0
14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
15
LEFT DATA SAMPLE
RIGHT DATA SAMPLE
BCLK(OUT)
SDOUT
15
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
15 14 13 12 11 10
9
8
7
6
5
4
3
2
1
0
RIGHT DATA SAMPLE
LEFT DATA SAMPLE
Figure 1. Left-Justified Audio Data
1 of 2
Download from Www.Somanuals.com. All Manuals Search And Download.
|