Please read this manual and save it with your original sales receipt.
Tools needed for assembly: Phillips Screwdriver, Slotted Screwdriver
and Safety Scissors (all not included); Assembly Tool (included).
Use only with a Power Wheels® 6 Volt (4.0 amp/hr.) rechargeable battery with built-in
thermal fuse and a Power Wheels® 6 Volt (4.0 amp/hr.) charger (both included)
Owner's Manual
with Asssemblyy IInstrucctions
For Model N9732
®
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNINGS AND CAUTIONS
ELECTRICAL HAZARD
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
®
®
- Use of Power Wheels components in products other than Power Wheels vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only.
A child could be injured by the electricity involved in charging the battery.
• Never lift or carry the battery by the wires or connector. This can damage the battery and
possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or
the battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride At Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- away from swimming pools and other bodies of water to prevent drownings
- generally level to prevent tipovers
- away from steps, steep inclines, cars, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
CAUTION
• In the unassembled state, this package contains small parts. Adult assembly is required.
• Use the charger in dry locations only.
N9732pr-0920
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this product
to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove any
excess lubricant.
Battery Retainer
(Engine Cover)
Grille
Vehicle
Steering Column
Steering Wheel Bottom
Hood
Dash
6 Volt Charger
Steering Wheel Top
Steering Wheel Cap
Windshield
T
TAN
R
O
P
S
T
T
IM
AM
MU
OP
SE
FU
P
IN
RE
FO
ED
ALL
ST
25
A
BE
E
G
IN
R
Y
R
HA
BE
TTE
C
BA
Y
O
RE
L
IL
TE
ERA
F
O
W
P
TO
R
O
6 Volt Battery
Windshield Frame
Spark Plug Wires
Assembly Tool
Shifter
Fasteners Shown Actual Size
Dashboard Set
3
1
/ 8" Lock Nut - 2
#8 x 1" Screw - 10
#6 x / " Screw - 11
2
Activity
Panel
Instrument
Panel
4 Traction Bands
Notes: Tighten and loosen all screws with a Phillips screwdriver.
Do not over-tighten the screws.
Parts Not Shown: Label Sheet - 2
N9732pr-0920
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS PICTURE
Note: Some of the parts shown are assembled to both sides of the vehicle.
10
9
4
12
16
15
5
14
17
13
8
3
11
18
1
7
2
6
1
2
3
4
5
6
Vehicle
Steering Column
Grille
Steering Wheel Cap
Spark Plug Wires
Traction Band - 4
7
8
9
6 Volt (4.0 amp/hr.) Charger
Battery Retainer (Engine Cover)
Windshield
13 Activity Panel
Parts Not Shown
Label Sheet - 2
3/8" Lock Nut - 2
#6 x 1/2" Screw - 11
#8 x 1" Screw - 10
14 Instrument Panel
15 Steering Wheel Bottom
16 Steering Wheel Top
17 Shifter
10 Windshield Frame
11 Dash
12 Hood
18 6 Volt (4.0 amp/hr.) Battery
N9732pr-0920
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
ELECTRICAL HAZARD
WARNING
CAUTION
• Battery can fall out and injure a child if
vehicle tips over. Always use battery retainer.
Use the charger in dry locations only.
• PREVENT FIRE
About Thermal Fuses
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin the
electrical system.
®
Your Power Wheels 6 volt battery is equipped with a built-in
thermal fuse. The thermal fuse is a self-resetting safety device
which automatically “trips” and shuts down operation of the
vehicle if the vehicle is overloaded or the driving conditions too
severe. Once a fuse has “tripped”, remove your foot from the
pedal and wait approximately 25 seconds before operating the
vehicle again. To avoid repeated automatic shut-downs, do not
overload the vehicle by exceeding the 50 lbs (23 kg.) maximum
weight capacity or by towing anything behind the vehicle. Avoid
severe driving conditions, such as driving up slopes or running
into fixed objects, which can cause the wheels to stop spinning
while power is still being supplied to the motors.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting
in serious injury.
- Use of Power Wheels® components in
products other than Power Wheels®
vehicles could cause overheating, fire
or explosion.
• The battery must be handled by adults only.
The battery is heavy and contains sulfuric
acid (electrolyte). Dropping the battery could
result in serious injury.
If a thermal fuse in a battery continually trips under normal
driving conditions, please contact your local Power Wheels®
Authorized Service Center. For the location of the Authorized
Service Center nearest to you, visit us on-line at
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the
Important Notes
• Your new battery must be charged for at least 18 hours before
you use it in your vehicle for the first time.
electricity involved in charging the battery.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• Never lift or carry the battery by the wires
or connector. This can damage the battery
and possibly cause a fire resulting in serious
injury. Lift and carry the battery by the
case only.
• You do not need to remove the battery from your vehicle to
recharge it.
• Read the safety instructions on the battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If damage
or excessive wear is detected, do not use
the charger or the battery until you have
replaced the worn or damaged part.
• Before charging the battery, examine the battery case for cracks
and other damage which may cause sulfuric acid (electrolyte) to
leak during the charging process. If damage is detected, do not
charge the battery or use it in your vehicle. Battery acid is very
corrosive and can cause severe damage to surfaces it contacts.
•
Do not charge the battery on a surface (such as a kitchen counter
top) which could be damaged by the acid contained inside the
battery. Take precautions to protect the surface on which you
charge your battery.
®
• Use only a Power Wheels 6 Volt (4.0 amp/hr.) charger (input
120 VAC 60 Hz with an output of 6 VDC 400 mA) to charge your
®
Power Wheels 6 volt (4.0 amp/hr.) battery.
• Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of
fire, electric shock or injury. In the event of any damage, do not
use the charger until the damage has been properly repaired.
Please call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave it
in the vehicle. Always remove a dead battery from the vehicle.
N9732pr-0920
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
Charger Connector
Battery Connector
Power Indicator
1
Battery Connector
• Plug the battery connector into the charger connector.
2
IMPORTANT! If you are recharging your battery, you will first
need to lift the hood and remove the battery retainer (pretend
engine cover). Disconnect the battery connector from the motor
harness connector.
• Plug the charger into a standard wall outlet.
Note: Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet. If power flow to the wall outlet is controlled
by a switch, make sure the switch is ON. The power indicator on
the charger does not indicate the charge status of your battery.
The power indicator allows you to see that there is power from the
wall outlet.
•
Before first-time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery for at least 14 hours after each use of your
vehicle. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the wall
outlet. The battery is now ready to be installed in your vehicle.
Please see the Battery Installation section on page 13 for detailed
instructions on installing your battery.
N9732pr-0920
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Steering
Column
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the vehicle's
unassembled state, or by electrical items.
Care should be taken in unpacking and
assembly of the vehicle. Children should not
handle parts, including the battery, or help in
assembly of the vehicle.
Guide
Steering
Linkage
Dash
Square
Opening
Steering
Column
Vehicle
Guide
3
BOTTOM VIEW
• Position the vehicle on its side.
• Fit the straight end of the steering column up through the
square opening in the vehicle and out through the large round
hole in the dash. Make sure the steering column is positioned
between the guides on the underside of the vehicle.
• Insert the end of the steering column through the hole in the
steering linkage, as shown.
1
FRONT VIEW
• Fit the dash onto the top of the vehicle.
• Insert a #8 x 1" screw through the hole in each end of the dash.
Tighten the screws.
Steering Wheel
Steering Column
Lock Nut
Steering Wheel
Bottom
Steering
Wheel Top
4
INSIDE VIEW
• Turn the vehicle upright.
• Fit the steering wheel onto the steering column.
• Fit a 3/8" lock nut onto the end of the steering column.
Tighten with the assembly tool.
2
• Fit the top and bottom of the steering wheel together. Make sure
both the holes and the spokes in the steering parts are aligned.
• Insert four #6 x /2" screws into the holes into the bottom of the
steering wheel and tighten.
1
N9732pr-0920
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Steering Wheel Cap
Steering Wheel
Shifter
Activity
Panel
7
• Using safety scissors, separate the activity panel and the instru-
ment panel. Dispose of the plastic connector.
• Insert and "snap" the base of the shifter into the activity panel.
5
• Fit the steering wheel cap into the center of the steering wheel.
Make sure the screw holes are aligned.
• Insert two #8 x 1" screws into the steering wheel cap and tighten.
Instrument Panel
Lock Nut
6
BOTTOM VIEW
• Position the vehicle on its side.
• Fit a 3/8" lock nut onto the end of the steering column.
• While supporting the steering column tighten the lock nut with
the assembly tool.
8
DASH VIEW
• Turn the vehicle upright.
• Fit the tabs on the bottom of the instrument panel into the notch-
es in the dash opening to the left side of the steering wheel.
• Press near the top of the instrument panel to "snap" in place.
N9732pr-0920
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Windshield
Activity
Panel
Dash
Slots
11
FRONT SIDE VIEW
• Fit the tabs on the back of the windshield into the slots in the top
of the dash.
9
• Fit the tabs on the bottom of the activity panel into the notches
in the dash opening to the right or the steering wheel.
• Insert two #6 x /2" screws into the holes in the top of the activity
panel and tighten.
Windshield
1
Windshield
12
• Lift the top of the windshield assembly towards the front of
the vehicle.
• Insert two #8 x 1˝ screws into the holes in each hinge and tighten.
10
Windshield Frame
• Fit the windshield onto the windshield frame.
1
• Insert five #6 x /2" screws into the holes in the windshield
assembly and tighten.
N9732pr-0920
10
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Grille
Traction
Band
Ridge
Wheel
13
• Fit the tabs on the bottom of the grille into the slots on the front
of the vehicle.
• Press near the top of the grille to "snap" it into place.
15
BOTTOM VIEW
• Turn the vehicle on its side.
• Fit a traction band around a wheel.
• Slide a slotted screwdriver under the traction band to push the
traction band onto the ridge in the center of the wheel.
Hood
Hint: If the traction band is difficult to fit around the wheel, you
may want to soak it in warm water to soften it slightly.
• Repeat this procedure to assemble a traction band to each wheel.
• Turn the vehicle upright.
Battery Retainer
(Engine Cover)
Slots
Spark Plug
Wire Set
Spark Plug
Wire End
Hole
14
• Fit the tabs on the hood into the slots in front of the windshield.
• Lower the hood.
16
• “Snap” the ends of the spark plug wires set into the holes on
the battery retainer (engine cover).
IMPORTANT! You must install your Power Wheels® battery in
your vehicle before assembling the battery retainer under the hood.
Please refer to "Battery Installation" on page 13 for detailed instructions.
N9732pr-0920
11
Download from Www.Somanuals.com. All Manuals Search And Download.
DECORATION
Proper label application will help to keep the labels looking
their best! Use the following guidelines when applying labels:
8
• Wash your hands before applying the labels.
• Wipe the surface of the vehicle with a clean, dry cloth to remove
any dust or oils.
2
• Place the labels exactly as shown in these instructions.
• For best results, avoid repositioning a label once it has been
applied to the vehicle.
8
• After applying a label, rub the label firmly with a clean, dry cloth
to securely adhere to the vehicle. Start at the center of the label
and smooth towards the outer edges to remove air bubbles.
4
26
3
1
12
REAR VIEW
9
16
15
13
20
5
21
22
20
23
25
18
5
6
19
FRONT LEFT SIDE
26
25
DASH VIEW -
LEFT SIDE (INSTRUMENT PANEL)
23
17
10
24
13
11
7
5
5
14
FRONT RIGHT SIDE
DASH VIEW -
RIGHT SIDE (ACTIVITY PANEL)
N9732pr-0920
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION AND BATTERY RETAINER
(ENGINE COVER) ASSEMBLY
®
IMPORTANT! Use only a Power Wheels 6 volt (4.0 amp/hr.)
battery. Use of any other battery will damage your vehicle.
Make sure you charge the battery for at least 18 hours using
®
the Power Wheels 6 Volt charger (included) before operating
your vehicle for the first time. Charge the battery for at least 14
hours after each use of the vehicle. Never charge the battery for
more than 30 hours. Failure to follow these instructions could
Battery Retainer
(Engine Cover)
damage your battery and will void your warranty.
Battery
Connector
Battery
Motor
Harness
Connector
3
• Fit the battery retainer over the battery, motor harness connector
and battery connector.
• Insert two #8 x 1" screws into the holes in the battery retainer
and tighten.
Hood
1
Hood
Latches
• Lift the hood.
• Place the battery in the battery compartment. Make sure the bat-
tery connector extends toward the motor harness connector.
Battery
Connector
Motor Harness
Connector
4
2
• Lower the hood. Lift the hood latches and fit the short tabs onto
the notches on the hood to secure it.
• Plug the battery connector into the motor harness connector.
Note: If the battery connector will not plug into the motor
harness connector, turn it over and try again. Do not force the
battery connector into the motor harness connector.
N9732pr-0920
13
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CARE AND DISPOSAL
Disposal
Care
• Your Power Wheels® battery is a non-spillable sealed lead-acid
battery. It must be recycled or disposed of in an environmentally
sound manner.
• Do not dispose of a lead-acid battery in a fire. The battery may
explode or leak.
If a battery leak develops, avoid contact with the leaking acid and
place the damaged battery in a plastic bag. See information below for
proper disposal.
If acid comes in contact with skin or eyes, flush with cool water for
at least 15 minutes and call a physician.
If acid is internally ingested, give water, milk of magnesia or egg
whites immediately. Never give emetics or induce vomiting.
Call a physician.
• Charge a new battery for at least 18 hours before first use. Never
charge the battery longer than 30 hours. Overcharging or under-
charging the battery may shorten battery life and decrease vehicle
running time.
• After the first charge, recharge the battery for at least 14 hours after
each use. Never charge the battery longer than 30 hours. Charge the
battery after each use, regardless of how long the vehicle was used.
• Do not dispose of a lead-acid battery in your regular, household
trash. The incineration, landfilling or mixing of sealed lead-acid
batteries with household trash is prohibited by law in most areas.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Return an exhausted battery to a federal or state approved lead-
acid battery recycler, such as a Power Wheels® authorized service
center or a local seller of automotive batteries. For the authorized
service center location nearest to you, please visit us on-line at
local waste management officials for other information regarding
the environmentally sound collection, recycling and disposal of
lead-acid batteries. If you live in the State of Florida or the State of
Minnesota, it is prohibited by law for anyone to throw away lead-
acid batteries in the municipal waste stream.
• The battery must be upright while charging.
• Do not allow the battery to run down completely before charging.
• Charge the battery before storing the vehicle.
• Charge the battery at least once per month, even if the vehicle has
not been used.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle. Battery leak-
age and corrosion can damage the vehicle.
• Do not store the battery on a surface (such as kitchen countertops)
which could be damaged by the acid contained inside the battery.
Take precautions to protect the surface on which you store
the battery.
• Do not store the battery in temperatures above 75° F or below -10° F.
• Prevent the battery from moving freely inside the battery compart-
ment. Always use the battery retainer (engine cover) to secure the
battery in the battery compartment.
• Examine the battery, charger and their connectors for excessive wear
or damage each time you charge the battery. If damage is detected,
do not use the charger or the battery until you have replaced the
worn or damaged part.
N9732pr-0920
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFE DRIVING RULES
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required.
• Never Ride At Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
Use vehicle on generally level ground ONLY!
- away from swimming pools and other
6. Do not allow any child to drive the vehicle in the dark. A child could
encounter unexpected obstacles and have an accident. Operate the
vehicle only in the daytime or a well-lit area.
bodies of water to prevent drownings
- generally level to prevent tipovers
7. Do not allow your child to drive on sloped or inclined surfaces.
- away from steps, steep inclines, cars,
roads and alleys.
• Riding Rules
Restrict your child’s driving to generally level ground ONLY!
8. Do not allow your child to drive down or across a steep slope.
- The vehicle may gain unsafe speed, even if the pedal is released
to stop.
- The vehicle may tilt and tip over.
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
- The wheels could lose traction, causing the vehicle to slip.
9. Do not allow your child to drive up steep inclines. The motor may
stop and the vehicle could roll backwards at an unsafe speed.
10. Never put anything near any moving parts. Rotating parts such as
motors, gear boxes and wheels can snag fingers, hair, etc., causing
serious injury. Do not allow operation of the vehicle when it is on
its side or in an upside-down position.
11. Do not operate the vehicle near flammable vapors (gasoline, paint
thinner, acetone, liquid wax, etc.). The vehicle’s electrical switches,
like most electrical switches, emit an internal spark when first
turned on or turned off. The presence of flammable liquids or
vapors could cause an explosion or a fire. Keep all flammable prod-
ucts in tightly sealed containers and away from the vehicle.
Teach Safety Rules to Children
While children can quickly develop the skill necessary to drive this
vehicle, it is important to remember that their judgment skills are
still very immature. Unsupervised driving by children can lead to
serious injury. Before children use this vehicle, an adult should
carefully evaluate the driving area as well as the children’s skill
level and ability to drive this vehicle safely. Children are not always
able to recognize or anticipate hazards, even when they have been
taught about them. There is no acceptable substitute for direct
adult supervision.
12. Do not allow a child to operate the vehicle without direct adult
supervision. To prevent unsupervised use of the vehicle, disconnect
the motor harness from the battery when the vehicle is not in use.
Teach appropriate safety rules to your child before allowing
operation of this vehicle. These rules should also be reviewed
with neighborhood children or other playmates who want to drive
this vehicle.
To disconnect the motor harness connector and battery connector:
- Lift the hood.
- Remove the battery retainer (engine cover).
- Disconnect the battery connector from the motor
Riding Rules
harness connector.
Make sure children know and follow these rules for safe driving:
- Replace the battery retainer (engine cover).
- Lower the hood and fasten the hood latches.
1. Always sit on the seat.
2. Always wear shoes.
3. Only 1 (one) rider at a time. A child who is not sitting on the seat
or who is standing on the vehicle could fall off, cause a tip-over
or block the driver’s view. A child could be seriously injured.
4. Do not allow any child to drive the vehicle in the street or near
moving (motorized) vehicles.
5. Do not allow any child to drive near bodies of water (such as
pools or creeks), obstructions (such as furniture, low tree limbs
or play equipment), or drop-offs (such as stairs or decks).
N9732pr-0920
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE OPERATION
VEHICLE CARE
• Check all screws, retainers and protective coverings regularly
and tighten as required. Check plastic parts on a regular basis
for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be stored
inside or under a protective cover. Remember to charge the
battery at least once per month while your vehicle is not in
regular use.
• Avoid operating the vehicle in wet or snowy conditions, and do
not spray the vehicle with a hose. Water or moisture in the motor
or electrical switches can cause them to corrode, and could
cause switch or motor failure.
IMPORTANT! Use this vehicle ONLY outdoors. Most interior
flooring can be damaged by riding this vehicle indoors. Fisher-Price
will not be responsible for damage if this vehicle is used indoors.
®
To Drive
• Avoid operating the vehicle on sand, loose dirt or gravel. Sand,
loose dirt or gravel in the motor or electrical switches can cause
them to jam, and could cause switch or motor failure.
• The vehicle can be wiped down with a soft, dry cloth. For a shiny
finish, you can wipe plastic parts with a non-wax furniture polish
applied to a soft-cloth. Do not use automotive wax. Do not use
soap and water or spray the vehicle with a hose.
• Push the top button to drive forward
• Press down on the foot pedal . The vehicle moves forward at a
maximum of 21/2 mph
.
.
• Help your child practice steering to learn how far and how
quickly to turn the steering wheel when driving forward.
• To ensure that your vehicle stays in good operating order, we
recommend that you periodically have your vehicle checked by a
®
Power Wheels authorized service center. For the location of the
authorized service center nearest you, please visit us on-line at
To Stop
BUMPER-TO-BUMPER
LIMITED WARRANTY
*One year limited warranty from the date of purchase
®
on the Power Wheels vehicle.
• Your vehicle has a patented, electronic braking system that auto-
matically stops the vehicle when your child’s foot is lifted from
the pedal.
Six month limited warranty on 6 volt battery.
For the original purchaser, this one year limited warranty covers the
®
®
Power Wheels ride-on vehicle (purchased from Power Wheels )
against defects in materials and workmanship. The six month lim-
ited warranty applies only to the 6 volt battery included by Power
To Back-Up
®
Wheels with the original purchase of the vehicle.
This warranty covers normal use and does not cover the
®
Power Wheels vehicle or battery if it has been damaged by unrea-
sonable use, neglect, accident, abuse, misuse, improper service
or other causes not arising out of defects in materials or workman-
ship. Evidence of any attempt at consumer repair will void
this warranty.
THIS WARRANTY DOES NOT COVER, AND IS INTENDED TO
• Once your child is comfortable operating the vehicle in forward,
introduce reverse.
IMPORTANT! To prevent damage to the motors, stop the vehicle
before switching between forward and reverse.
®
EXCLUDE, ANY LIABILITY ON THE PART OF POWER WHEELS ,
WHETHER UNDER THIS WARRANTY OR IMPLIED BY LAW, FOR
ANY INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH OF
WARRANTY. SOME STATES DO NOT ALLOW THE EXCLUSION OR
LIMITATION, SO THIS LIMITATION MAY NOT APPLY TO YOU.
• Push the bottom button to drive in reverse
• Press down on the foot pedal . The vehicle moves backwards at
a maximum of 21/2 mph
.
Should you need service or assistance with your vehicle dur-
ing the warranty period, do not return the vehicle to the store.
.
®
Power Wheels has provided a nationwide network of authorized
• Help your child practice steering to learn how far and how quickly
to turn the steering wheel when driving in reverse.
service centers. For the location of the authorized service center
®
call 1-800-348-0751. Power Wheels is continually expanding our
Authorized Service Center Network. If there is not an authorized
service center in your area, please call Consumer Relations for
information, 1-800-348-0751.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM
STATE TO STATE. PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
N9732pr-0920
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still
experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751 between 9 AM and 7 PM
(EST) Monday through Friday and 11 AM - 5 PM (EST) Saturday. Or, contact your local Power Wheels® authorized service center.
For the location nearest you, please visit us on-line at www.powerwheels.com, or call 1-800-348-0751.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle does not run
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector is
tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Charger is not working
Tripped thermal fuse
There is no sure way to tell if your charger is working unless
you have a volt meter. If you suspect there is a problem with
your charger, contact your local Power Wheels® authorized
service center. They can test your charger for you.
The built-in thermal fuse may "trip" and shut down operation of
the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has "tripped," remove your foot from
the pedal and wait approximately 25 seconds before operating
the vehicle again. To avoid repeated automatic shutdowns, do
not overload the vehicle by exceeding the 50 lb (23 kg)
maximum weight capacity or by towing anything behind the
vehicle. Do not drive up hills or run into fixed objects, which
can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center.
Loose wire or loose connectors
Dead battery
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor harness connector
and that there are no loose wires around the motors.
If your battery is old or if you have not followed Battery
Care instructions, your battery may be dead. If you are
unsure whether or not the battery is dead, you can have
it tested at your local Power Wheels® authorized
service center.
Electrical switch damage
The electrical switches can become corroded due to
exposure to water or moisture, or can jam due to loose dirt,
sand or gravel. Contact your local Power Wheels® authorized
service center for diagnosis and repair.
Motor damage
Contact your local Power Wheels® authorized service center
for diagnosis and repair.
Vehicle was running but
suddenly stopped
Loose wire or loose connectors
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the motor harness con-
nector, and that there are no loose wires around the motors.
N9732pr-0920
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
The built-in thermal fuse may "trip" and shut down operation of
the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has "tripped," remove your foot from
the pedal and wait approximately 25 seconds before operating
the vehicle again. To avoid repeated automatic shutdowns, do
not overload the vehicle by exceeding the 50 lb (23 kg)
maximum weight capacity or by towing anything behind the
vehicle. Do not drive up hills or run into fixed objects, which
can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center.
Vehicle was running but
suddenly stopped (cont.)
Tripped thermal fuse
Short run time (Less than
1 - 3 hours per charge)
Undercharged battery
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the
battery longer than 30 hours.
Check all wires and connectors. Make sure the battery
connector is tightly plugged into the charger connector, and
that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Overcharged battery
Do not charge the battery longer than 30 hours. If you
suspect that your battery is damaged as a result of
overcharging, contact your local Power Wheels® authorized
service center. They can test the battery for you.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with a
Power Wheels® 6 Volt (4.0 amp/hr.) battery with built-in
thermal fuse. Do not substitute parts.
Tripped thermal fuse
Undercharged battery
Battery needs charging
The built-in thermal fuse may "trip" and shut down operation of
the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has "tripped," remove your foot from
the pedal and wait approximately 25 seconds before operating
the vehicle again. To avoid repeated automatic shutdowns, do
not overload the vehicle by exceeding the 50 lb (23 kg)
maximum weight capacity or by towing anything behind the
vehicle. Do not drive up hills or run into fixed objects, which
can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center.
Vehicle runs sluggishly
Charge the battery. A new battery should have been
charged for at least 18 hours before using the vehicle for
the first time. After first-time use, recharge the battery for
at least 14 hours after each use. Never charge the battery
longer than 30 hours.
Check all connectors. Make sure the battery connector
is tightly plugged into the charger connector, and that the
charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON”.
Be sure to charge the battery after each use.
Battery is old and will not
accept full charge
Even with proper care, a rechargeable battery does not
last forever. Average battery life is 1 to 3 years depending
on vehicle use and use conditions. Replace only with a
Power Wheels® 6 Volt (4.0 amp/hr.) battery with built-in
thermal fuse. Do not substitute parts.
N9732pr-0920
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle runs sluggishly (cont.)
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing
more than one rider at one time, exceeding the 50 lb.
maximum weight capacity, or by towing objects behind the
vehicle. If the vehicle is overloaded, the built-in thermal fuse in
the battery may "trip." Once a fuse has "tripped," remove your
foot from the pedal and wait approximately 25 seconds before
operating the vehicle again. Adjust the driving conditions
to prevent repeated automatic shutdowns.
Driving conditions are too stressful
Loose wire or connector
Use only on generally level ground.
Sometimes the vehicle doesn’t
run, but other times it does
Check all wires around the motors and all connectors to
make sure they are tight.
Motor or electrical switch damage
Loose wire or connector
“Dead Spot” on motor
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
When the foot pedal is pressed,
the vehicle won’t run without
a push
Check all wires around the motors and all connectors
to make sure they are tight.
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Battery’s thermal fuse constantly
"trips", but the vehicle is not
overloaded nor the driving
conditions too severe
Damaged battery
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Child is switching between
FORWARD and REVERSE
without stopping
Teach your child to stop the vehicle before switching
direction.
Loud clacking or grinding
noise from a motor-gearbox
Broken gears
Contact your local Power Wheels® authorized service
center for diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason
for concern. Some chargers do not
get warm during use.
No action required.
If your charger does not get warm during
use, it does not mean that it is not working properly.
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to
make noise and swell slightly while
charging and is not reason for concern.
No action required.
If your battery does not make noise or swell slightly
during charging, it does not mean that it is
not accepting the charge.
N9732pr-0920
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first-time use, you must
charge the battery 18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle is not used or stored.
Do not return
yourvehicle to the store!
Or contact your local independently owned and operated
Power Wheels® Authorized Service Center.
Jeep and the Jeep grille design are registered trademarks of DaimlerChrysler Corporation and are used under license.
Jeep® and the Jeep® grille design are registered trademarks of DaimlerChrysler Company, LLC.
Jeep® Wrangler® and its trade dress are used under license from DaimlerChrysler Company, LLC. ©DaimlerChrysler Company, LLC 2008.
BARBIE and associated trademarks and trade dress are owned by, and used under license from Mattel, Inc. ©2008 Mattel, Inc. All Rights Reserved.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2008 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN MEXICO
N9732pr-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|