ITEM NO. __________________________________________________
PROJECT __________________________________________________
LOCATION_________________________________________________
DATE _________________________ QTY. _______________________
Full-length
evaporator coil
and vertical fan
tower provide
evenly distributed
cooling.
MCR-33-101 &
MCR-33-102 SERIES
Roll-in & Pass-Thru
Blast Chillers
ROLL-IN MODELS
❑ MCR-33-101
PASS-THRU MODELS
❑ MCR-33-101PT
❑ MCR-33-102
❑ MCR-33-102PT
MCR-33-101
FEATURES
CONSTRUCTION
CONTROL PANEL
COOLING TIME
• Stainless steel interior and exterior
with polyurethane foamed-in-place
insulation
• Interior light
• Door gasket heater
• HACCP compliant recording features
• Surface mounted on exterior of blast
chiller
• On/off switch
• Digital readout of interior ambient
temperature
• Maximum load of 260 pounds of
food requires approximately 90 min-
utes per cooling cycle depending on
food density and input temperature
of food
• High velocity forced air convection
through evaporator coil
• Digital cycle timer
WARRANTY
• HACCP compliant recording ther-
mometer for blast chiller ambient
air temperature (requires printer to
have record)
• Microprocessor control system
enclosed in easily accessible box
• Automatic air defrost cycle
• Automatic hold cycle
• Standard limited one year extended
compressor (optional four year ex-
tended warranty available), one year
limited parts, limited 10 year panel
• 4 food temperature probes with se-
quential readout display in MCR-33-
101, 8 probes in MCR-33-102
• Automatic chill cycle control with
food temperature probes
• Audible alarm at end of chilling cycle
RACK
• Racks provided:
– MCR-33-101.............................. 1
– MCR-33-102.............................. 2
• Stainless steel construction
• Accomodates 26 pans, 12" x 20" x
21/2", two per each of 13 ledges
• Ledges on 41/2" spacing
• Each pan holds up to 10 pounds of
food for total rack quantity of 260 lbs.
• Rack dimensions: 241/2" wide x 27"
deep x 685/16" high
DOORS
• Door dimensions: 30" x 78"
• Flush mounted
• 36" high 16 ga. stainless steel kick-
plate on door exterior
OPTIONS
❑ Optional finishes
❑ Add suffix “C” for correctional
model
❑ Printer package
❑ Extended four year compressor
warranty
REFRIGERATION SYSTEM
• An air- or water-cooled condensing
unit will be supplied depending on
application.
• Rack mounted on heavy-duty swivel
casters
908 Highway 15 North • New Albany, MS 38652
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS
All condensing units must include a suction accumulator. Pull down time reflects time neces-
sary to lower listed quantity of food from 140°F to 40°F. All units listed contain R-404A refrigerant.
UNIT CONNECTION
SIZES
BTUH
@ -10°F
SUCTION
DIMENSIONS
SEE
DRAWING...
(PP. 4-5)
COND.
UNIT
MODEL*
RECEIVER
PUMPDOWN
CAP. @ 90%
SHIP
WT.
(LB/KG) MCA**
H.P. TEMP.** LIQUID SUCTION
MOP**
RLA**
LRA**
MCR-33-101, 200 LB. CAPACITY, 2 HOUR PULL DOWN TIME
MSLZ0101C
MHLZ0121B
MCLZ0111B
MCLZ0111C
3
3
3
3
10,653
11,559
10,372
10,343
3/8
1/2
1/2
1/2
7/8
1-1/8
7/8
M2
M2
M2
M2
11.4
11.4
11.4
11.4
200/91
260/118
330/150
330/150
20
30
24
19
30
45
35
25
11.1
19
14.7
10
77
105
86
7/8
82
MCR-33-101, 200 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME
MSLZ0151C
BSLZ0400B
BSLZ0400C
BSLZ0400E
BCLZ0280B
BCLZ0280C
BCLZ0280E
4
4
4
4
3
3
3
14,994
15,047
15,047
15,047
15,529
15,529
15,529
1/2
1/2
1/2
1/2
5/8
5/8
5/8
7/8
7/8
7/8
7/8
11/8
11/8
11/8
M2
C
C
C
C
11.4
41.5
41.5
41.5
41.5
41.5
41.5
230/105
510/232
510/232
510/232
505/230
505/230
505/230
32
42
32
20
32
32
20
40
60
40
20
40
35
20
15
26.8
15
8.2
15
99
129
99
50
105
112
56
C
C
12.6
6.2
MCR-33-101, 250 LB. CAPACITY, 2 HOUR PULL DOWN TIME
MSLZ0151C
MCLZ0141B
MCLZ0141C
BSLZ0400B
BSLZ0400C
BSLZ0400E
BCLZ0280B
BCLZ0280C
BCLZ0280E
4
3
3
4
4
4
3
3
3
14,994
13,799
13,903
15,047
15,047
15,047
15,529
15,529
15,529
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
7/8
13/8
11/8
7/8
7/8
7/8
11/8
11/8
11/8
M2
M2
M2
C
C
C
C
C
C
11.4
11.4
11.4
41.5
41.5
41.5
41.5
41.5
41.5
230/105
500/227
500/227
510/232
510/232
510/232
505/230
505/230
505/230
32
28
26
42
32
20
32
32
20
40
40
35
60
40
20
40
35
20
15
16.7
12.8
26.8
15
8.2
15
12.6
6.2
99
105
112
129
99
49.5
105
112
56
MCR-33-101, 250 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME
MSLZ0181C
MDLZ0201C
5
3
18,945
19,518
1/2
1/2
11/8
11/8
M3
M3
15.2
15.2
240/109
530/241
36
38
55
45
21.4
16.8
123
102
MCR-33-101, 250 LB. CAPACITY, 1.3 HOUR PULL DOWN TIME
BSLZ0600C
BCLZ0400C
BCLZ0400E
BSLZ0600E
6
4
4
6
21,651
21,531
21,531
21,651
1/2
5/8
5/8
1/2
7/8
13/8
13/8
7/8
C
C
C
C
41.5
41.5
41.5
41.5
550/250
530/230
530/230
550/250
41
44
22
21
60
60
30
25
23.9
26.3
10.2
9.3
156
161
60
70
MCR-33-101 250 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME
BCLZ0750C
BCLZ075UE
71/2
71/2
37,322
37,322
7/8
7/8
13/8
13/8
D
D
53.4
53.4
730/332
730/332
55
32
80
40
31.5
16.1
161
83
MCR-33-101 250 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME – WATER COOLED CONDENSING UNITS
SCLZ075WC 71/2
SCLZ075WE 71/2
39,600
39,600
5/8
5/8
13/8
13/8
D
D
78.4
78.4
730/332
750/341
50
32
80
40
31.5
16.1
161
83
MCR-33-102, 400 LB. CAPACITY, 2 HOUR PULL DOWN TIME
MSLZ0221C
MDLZ0231C
BCLZ040LC
6
4
4
23,018
22,958
23,171
1/2
1/2
5/8
11/8
11/8
13/8
M5
M3
C
17
15.2
41.5
250/114
530/241
530/241
39
42
45
60
60
70
23.9
26.3
26.3
156
161
161
MCR-33-102, 400 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME
MDLZ0291C 29,187 5/8 M5
13/8
MCR-33-102, 500 LB. CAPACITY, 2 HOUR PULL DOWN TIME
6
17
560/255
47
70
28.2
161
MDLZ0291C
BSLZ0750C
BCLZ0600C
BCLZ0600E
6
71/2
6
29,187
26,006
26,466
26,466
5/8
1/2
5/8
5/8
13/8
7/8
13/8
13/8
M5
C
C
17
560/255
550/250
560/255
560/255
47
54
46
26
70
80
70
35
28.2
30.9
28.2
13.3
161
189
161
80
41.5
41.5
41.5
2
C
**Based on 90°F ambient
***Electrical ratings for condensing unit only. See National
Electrical Code if units are combined on a single circuit.
*VOLTAGE KEY:
“B” suffix = 208-230 or 230 volt, 60 cycle, one phase
“C” suffix = 200-230 or 208-230 volt, 60 cycle, three phase
“E" suffix = 460 volt, 60 cycle, three phase
3
Download from Www.Somanuals.com. All Manuals Search And Download.
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS
UNIT CONNECTION
SIZES
BTUH
@ -10°F
SUCTION
DIMENSIONS RECEIVER
COND.
UNIT
MODEL*
SEE
DRAWING...
(PP. 4-5)
PUMP-
DOWN
SHIP
WT.
H.P. TEMP.** LIQUID SUCTION
CAP. @ 90% (LB/KG) MCA** MOP** RLA** LRA**
MCR-33-102, 500 LB. CAPACITY, 1.5 HOUR PULL DOWN TIME
MDLZ0331C
BCLZ0750C
BCLZ0750E
6
71/2
71/2
32,417
37,322
37,322
5/8
7/8
7/8
13/8
13/8
13/8
M5
D
D
17
53.4
53.4
560/255
730/332
730/332
50
55
32
70
80
40
30.3
31.5
16.1
150
161
83
MCR-33-102, 500 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME
BCLZ1500C
BCLZ1500E
15
15
70,782
70,782
7/8
7/8
15/8
15/8
F
F
116.1
116.1
990/450
990/450
90
51
125
70
52.6
26.3
278
139
MCR-33-102, 500 LB. CAPACITY, LESS THAN 1 HOUR PULL DOWN TIME – WATER-COOLED CONDENSING UNITS
SCLZ100WC 10
SCLZ100WE 10
54,800
54,800
7/8
7/8
13/8
13/8
E
E
105.3
105.3
910/414
910/414
66
34
100
50
42
18.6
215
106
*VOLTAGE KEY:
“B” suffix = 208-230 or 230 volt, 60 cycle, one phase
“C” suffix = 200-230 or 208-230 volt, 60 cycle, three phase
“E" suffix = 460 volt, 60 cycle, three phase
**Based on 90°F ambient
***Electrical ratings for condensing unit only. See National Electrical Code if units are combined on a single circuit.
BASE “C”
BASE “D”
BASE “E”
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MASTER-CHILL™ MCR-33-101 & MCR-33-102 SERIES
ROLL-IN & PASS-THRU BLAST CHILLERS
REFRIGERATION SYSTEM TECHNICAL SPECIFICATIONS (cont.)
BASE “F”
BASE “M2”
BASE “M3”
BASE “M5”
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BID SPECIFICATIONS
Item no. MCR-33-______
tain one 30" x 78" flush mount-
ed, polyurethane foamed door.
Pass-thru models will contain
two doors. Doors will be provid-
ed with a 36" high 16 ga. stainless
steel kickplate on the exterior.
Doors will also be supplied with a
hold-open feature, magnetic gas-
kets and gasket heater.
Blast chillers will be provided
with an air- or water-cooled con-
densing unit depending on ap-
plication requirements.
• Audible alarm at end of chill-
ing cycle
• Six programmable one-touch
preset chilling programs for
easy use
Blast chillers will be supplied
with stainless steel racks (one
rack for MCR-33-101/33-101PT,
two for MCR-33-102/33-102PT)
mounted on heavy-duty swivel
casters. Racks accommodate
26 pans, 12" x 20" x 21/2", two
per each of 13 ledges. Each pan
holds up to 10 lbs. of food for to-
tal rack quantity of 260 lbs. Di-
mensions of rack are 241/2" wide
x 27" deep x 685/16" high.
Provide______ (
) Roll-in or
Pass-thru Blast Chiller(s)
Master-Bilt model number
MCR-33-______.
Blast chiller to be provided
with stainless steel construction
and polyurethane foamed-in-
place insulation. Blast chiller will
feature high velocity forced air
convection through evaporator
coil.
Probes with sequential read-
out display will be supplied for
food temperature recording (four
probes in MCR-33-101 model,
eight in MCR-33-102).
Blast chiller will be equipped
with a standard exterior mount-
ed control panel featuring the
following:
An automatic chill cycle
control with food temperature
probes is also supplied.
A thermometer will be pro-
vided for recording blast chiller
ambient air temperature. Ther-
mometer will require optional
printer for record of tempera-
tures.
• On/off switch
Blast chillers to have standard
limited one year extended com-
pressor warranty (optional four
year extended warranty avail-
able) with one year limited parts
and limited 10 year for panels.
Blast chillers will be UL and
C-UL listed and UL EPH classified.
• Digital readout of interior ambi-
ent temperature and probe tem-
peratures
• Digital cycle timer for timed
chilling
• Microprocessor control system
enclosed in easily accessible box
• Automatic defrost cycle and
hold cycle
Roll-in blast chillers will con-
NOTE: All specifications subject to change without notice.
908 Highway 15 North • New Albany, MS 38652
1287 - 2/08-web
©Master-Bilt Products division of Standex International, Inc. All rights reserved. Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|