WSX
Hyperbolic folded bass horn
features
Q
Q
Q
7ft (2.1 metre) folded-horn subwoofer
Maximum efficiency deep bass reproduction
Mirror image stacking capability
applications
Q
Q
Q
Bass ground stack for W8 and W8C
Outdoor bass line source
Contemporary dance music subwoofer
The WSX is a folded horn subwoofer which has been specifically designed to reproduce very deep bass
frequencies with maximum efficiency, speed and impact. It is intended to be used with Martin Wavefront Series
loudspeakers such as the W8 and W8C and also the W8 line array enclosures in the most demanding touring
situations where extreme levels of bass are required. It is also ideal for reproducing the concentrated bass
energy of contemporary dance music in club environments.
It features a powerful 600 Watt, 18" (460mm) driver with magnet structure and suspensions specially
engineered for very large linear excursion. The internal 'S' shaped folded horn - a Martin hallmark - is over 7
feet (2.1 metres) long and couples the driver to the airload by means of a modified hyperbolic expansion law.
This results in an efficiency typically 5dB greater than ported direct radiator sub-bass systems and contributes
to the exceptionally fast transient characteristic of the WSX.
The WSX is designed to be ground stacked and ultimate performance is achieved by close coupling a stack of
four or more WSX's mirror imaged on their sides to increase the combined horn mouth area. For large
outdoor systems, stacking mirror imaged pairs up to six or more high will form a tall line source which will
focus the bass into the audience yet retain good horizontal coverage.
The WSX is constructed from multi-laminate birch ply and is fully equipped for touring with rear castors and
bar handles.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
1 of 3
Download from Www.Somanuals.com. All Manuals Search And Download.
WSX
Hyperbolic folded bass horn
technical specifications
architectural and engineering specifications
TYPE
Hyperbolic folded bass horn
The loudspeaker system shall be of the horn-loaded
sub-bass type consisting of one 18" (460mm) long
excursion low frequency transducer loaded with a
hyperbolic horn flare folded in a plywood enclosure.
The loudspeaker shall be operated with a separate
electronic controller for dedicated sub-bass use.
FREQUENCY RESPONSE (1) 35Hz-150Hz 3dB
-10dB @ 28Hz
DRIVERS
RATED POWER (2)
RECOMMENDED AMPLIFIER 550-1000W into 4 ohms
18" (460mm) long excursion
600W AES, 2400 peak
SENSITIVITY (3)
105dB
MAXIMUM SPL (4)
NOMINAL IMPEDANCE
CROSSOVER
FINISH
PROTECTIVE GRILLE
CONNECTORS
132dB continuous, 138dB peak
8 ohms
150Hz or below
Textured grey paint
Grey perforated steel
2 x Neutrik NL8
(W) 572mm x (H) 1066mm x (D) 936mm (1067mm)
(W) 22.5ins x (H) 42ins x (D) 36.9ins (42ins)
95kg (209lbs)
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
38Hz-150Hz 3dB.
DIMENSIONS (inc. wheels)
WEIGHT
Power handling shall be 600W AES, 2400W peak.
Rated impedance shall be 8 ohms.
Maximum SPL measured at 1 metre on axis shall be
132dB continuous, 138dB peak.
Dimensions (W) 572mm x (H) 1066mm x (D) 1065mm
(22.5ins x 42ins x 41.9ins).
accessories
WSXLID
Lid and cabinet fittings
Weight 96kg (211.6lbs).
The loudspeaker system shall be the Martin Audio
WSX.
N o t e s
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4π) space at 2 metres using band limited pink noise, then referred to 1 metre.
Tr a d e D e s c r i p t i o n s A c t
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
3 of 3
Download from Www.Somanuals.com. All Manuals Search And Download.
|