Marshall Electronics
11
Standard Accessories
1910 East Maple Ave.
El Segundo, CA 90245
Accessories Supplied with the V-R151P-4A
Tel.: 800-800-6608 • 310-333-0606
Fax: 310-333-0688
• Users manual
• “Brick” type 12vdc power supply with 4 Pin Female XLR connector
• “V” Mount battery adapter
• VESA 75 Mount
Email: [email protected]
12
Optional Accessories
Desk Stand - VP-LCD171H-ST-01 - Use for Desk Top
V-R151P-4A Users Guide
1
2
3
4
5
Product Overview
Features
Specifications
Setup
Connectors
Front Panel Indicators and Controls
Menu Functions
6
7
8
9
PC Formats Supported from VGA and DVI Connectors
Video Formats Supported By Component and DVI Inputs
Video Formats Supported By Composite and S-Video Inputs
Standard Accessories
10
11
13
Warranty
Marshall Electronics warranties to the first consumer, that this V-R151P-4A 15 inch LCD rack mounted monitor will, under normal use, be free from defects in workmanship and materials, when
received in its original container, for a period of one year from the purchase date.
This warranty is extended to the purchasing end user only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase provided with a warranty claim, Marshall
Electronics reserves the right not to honor the warranty set forth above. Therefore, labor and parts may be charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in design or construction, voids this warranty. No
sales personnel of the seller, nor any other person is authorized to make any warranties other than those described above, or to extend the duration of any warranties on behalf of Marshall
Electronics, beyond the time period described above.
12
13
Optional Accessories
Warranty
An extra note about LCD displays: It is considered normal for a minimal amount of pixels, not to exceed three, to fail on the periphery of the display active viewing area. Marshall Electronics
has the option to reserve service for display pixel failure if deemed unobtrusive to effective use of the monitor by our technicians.
Due to constant effort to improve products and product features, specifications may change without notice.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Connectors
12 VDC from
power supply
4 Pin Male XLR
Pin 4 - Pos
Pin 1- Neg
VESA 75mm
Attach Points
VGA/XGA Connector
PIN#
SIGNAL
RED
PIN#
9
SIGNAL
NC
NC
NC
NC
HSYNC
VSYNC
NC
1
2
3
4
5
6
7
8
GREEN
BLUE
NC
GND
RED SHIELD
GREEN SHIELD
BLUE SHIELD
10
11
12
13
14
15
S-Video IN
4 Pin Din (Female)
Pin1 - GND
Pin2 - GND
Tally IN HD-15 Female
Pin3 – Y in
Pin4 – C in
Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Gnd -
Pin5-
Pin8-
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-
Pin15-
Pin6-
Pin7-
4 Composite
Video Inputs
6
Front Panel Indicators and Controls
Note: MENU select will toggle through 5 menus, PICTURE, SCREEN, FUNCTION, SOURCE and TV
7
Menu Functions
1. Picture Menu (Use UP/DOWN/LEFT/RIGHT buttons to select function)
YPrPb
9
9
9
9
S-Video
9
9
9
9
Video
9
9
9
9
PC DVI
9 9
9 9
Brightness
Contrast
Sharpness
Tint
Phase
9 9
9 9
Color
9
9
9
Color temp
Marshall Electronics
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Function Menu (Use UP/DOWN/LEFT/RIGHT buttons to select function)
YPrPb
S-Video
Video
PC DVI
9 9
9 9
9 9
9 9
Auto Configure
DPMS
9
9
9
9
9
9
Reset
9
9
9
OSD Time Out
Sleep Timer
Language
AUTO Configure – Used for PC signals to auto fit image to screen.
DPMS – When selected to ON, the Digital Power Management System will place the monitor into standby when there is no
input signal for 12 seconds and will automatically turn on the monitor when a signal is applied to the last selected source.
Reset – Restores the monitor to factory settings
OSD TIME-OUT – Set time in seconds (0 to 60) for OSD to drop from screen after last button push
SLEEP TIMER – Used to automatically turn monitor off after programmed delay
Language – Not Used
3. Screen Menu (Use UP/ DOWN/ LEFT/ RIGHT buttons to select function)
YPrPb
S-Video Video
PC
DVI
H-Position
V-Position
Frequency
9 9
9 9
9 9
V-Position – Use LEFT and RIGHT buttons to adjust horizontal position of the PC Image
H-Position – Use LEFT and RIGHT buttons to adjust wertical position of the PC Image
Frequency – Use LEFT and RIGHT buttons to adjust the pixel clock width of the PC Image
4. Source Menu (Use UP/ DOWN/ LEFT/ RIGHT buttons to select function)
YPrPb
S-Video
9
9
9
9
Video
9
9
9
9
PC
DVI
Analog RBG (PC)
9
9
9
9
9 9
9 9
9 9
9 9
Composite Video
S-VHS Video
YPrPb
Analog RGB – Select the on screen source display to be from the HD-15 PC connector on the rear of the unit.
Composite Video – Select the on screen source display to be from the 4 BNC(Video) connectors on the rear of the unit.
S-VHS Video – Select the on screen source display to be from the 4 Pin S-Video Connector
YPrPb – Select the on screen display to be from the component 3 BNC YPrPb connectors
DVI – Select the on screen display to be from the DVI Digital Connector
5. Alternate Menu Functions
Menu is shown by holding down ALT and then pressing the MENU button. (ALT+MENU).
Function selection and cursor movement is performed with the source selection buttons.
V-R151P-4A Useers Guide
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|