10 Switch Settings, Functions and Indicators
Marshall Electronics
Tally Indicators
1910 East Maple Ave.
El Segundo, CA 90245
Tel.: 800-800-6608 • Fax: 310-333-0688
Email: [email protected]
V-R65P-HD
Users Guide
Power On/Off
selection switch
Input Source selectors.
Selected source will
illuminate the indicator.
Flashing indicates
Screen adjustments
TINT adjust is not
available for PAL, Digital,
or Component signal
standards.
Function Control Table
BUTTON FUNCTION
Illuminates Red
when power is applied.
Turns Green when
monitor is switched on
BARS
Bars On/Off
(overrides video input)
no signal present.
Component button
toggles:
Tap 1-YPrPb interlace,
Tap 2-YprPb Progressive,
Tap 3-VGA
BARS + ZOOM
MARK
Sharpness
(Toggles 4 Settings plus off)
Frame Aspect Shaded
Overlay
Tap Once-14:9
Tap Twice –13:9
Tap Thrice – 4:3
Tap 4 times –1.85:1
Tap 5 times – 2.35:1
Hold MARK for
2 seconds
Center & Safe area display
(Toggle On/Off)
ZOOM
Tap once – Mono
Tap Twice-Zoom Mono
Tap Thrice-Zoom Color
Tap four times-Normal
Product Overview 1
Hold BARS for
2 seconds
Blue only display
(Toggle On/Off)
Features
Standard Accessories
Optional Accessories
2
3
4
Hold ZOOM for
2 seconds
16:9/4:3 aspect toggle
11 Warranty
Marshall Electronics warranties to the first consumer, that this V-R65P-HD portable monitor will, under normal use, be free from defects in work-
manship and materials, when received in its original container, for a period of one year from the purchase date.
This warranty is extended to the first consumer only and proof of purchase is necessary to honor the warranty. If there is no proof of purchase pro-
vided with a warranty claim, Marshall Electronics reserves the right, not to honor the warranty set forth above. Therefore, labor and parts may be
charged to you.
This warranty does not apply to product exterior and cosmetics. Misuse, abnormal service or handling, improper alterations or modifications in
design or construction, voids this warranty. No sales personnel of the seller, nor any other person is authorized to make any warranties other than
those described above, or to extend the duration of any warranties on behalf of Marshall Electronics, beyond the time period described above.
Prior to any warranty repair, a Return Material Authorization (RMA) must be issued by the dealer/distributor that sold the V-R65P-HD to the original
user. Returned products must be clearly identified with the RMA number on the outside packaging.
Electrical Specifications
Mechanical Specification
Faceplate Cleaning
5
6
7
Operational Setup
8
Input Connectors
9
Marshall Electronics reserves the right to repair or replace warranted products after evaluation by the factory repair depot.
Switch Settings, Functions and Indicators
Warranty
10
11
Due to constant effort to improve products and product features, specifications may change without notice.
© Marshall Electronics • 1910 East Maple Avenue • El Segundo, CA • Product and features subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories (continued)
8 Operational Setup
1.Unpack the V-R65P-HD and accompanying V-PS12-5V-1 power supply. Physically inspect for any damage that may
have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at 800-800-
6608. If you are not located within the continental united states call +1 310-333-0606.
Use to replace damaged or scratched protective
cover for screen
Replacement
Protection Screen
V-R65-RPS
2.Connect required cables for signal input and output.
Please note that power must be applied to the V-R65P-HD for the HDSDI/SDI and composite outputs to be
activated. All BNC connectors should be rated for 75Ω.
Rack-mount kit A
Rack-mount kit B
V-R65-1M
V-R65-2M
(Image not available)
(Image not available)
Single monitor mount for 19” rack
Dual monitor mount for 19” rack
3.Plug the V-PS12-5V-1 power supply into the A.C. source
Please note that power can be supplied from a variety of DC sources, such as batteries or Vehicle power.
Input power range is 10.7 to 15 Volt D.C. In operation, the V-R65P-HD will draw approx. 0.8 amp.
Attach twist lock power connection from V-PS12-5V-1 power supply to the back of the unit.
Component input cable
Power Adapter Cable
Power Adapter Cable
Mount for IDX Batteries
RGB-5HD15-X
HD-15 to BNC break out cable
(X = Length in feet 6, 10, 15, 20)
Use with Anton Bauer D-type connection
4.Turn on the V-R65P-HD by depressing the power switch located on the front of the unit.
V-PAC-D
9 Input Connectors
V-PAC-XLR
V-R65-BA
IDX-VL-2Plus
IDX-VL-4
Use with 4 Pin XLR connections
Attaches to V-R65P-HD monitor
* Tally lamps active when connected to ground
Tally IN DB-15 Female
Pin8-
Pin1- Green
Pin2- Red
Pin3-Amber
Pin4 Gnd -
Pin5-
HDSDI or SDI in.
270Mbs to 1.5Gbs
Automatically
terminates to 75Ω
Refer to Table 3
for signal types
Composite Video IN
NTSC/PAL
Component Video
or VGA INPUT
HD-15 Female refer
to Table 1 for signal
pin outs and Table 2
for Signal Types
Pin 9-
Pin10-
Pin11-
Pin12-
Pin13-
Pin14-
Pin15-
Automatically
terminates
2-channel sequential charger with a built-in 60W power sup-
ply. Charges 2 ENDURA E series batteries in fewer than 5
hours. One 10’ XLR cable included.only 2 lbs
to 75Ω
Sequential 2 channel
charger
Pin6-
Pin7-
Economically charges 4 ENDURA E series batteries in under
6 hours using Full Power Charge (FPC) method
Sequential 4 channel
charger
Simultaneous 4 channel
charger
IDX-VL-4S
IDX-E50S
IDX-E50
Charges 4 ENDURA E series batteries in 2.5 hours or less
V-Mount battery pack with 3 LED power Indicator
55 W Lithium Battery
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
55 W Lithium Battery
with Power Link
Re-Clocked
HDSDI/SDI Output.
Signal in equals
signal out
Active
Composite
Output
10.7 to 15 VDC
V-PS12-5V-1 power supply is
included
Left Pin - Pos. Right Pin- Neg
V-Mount battery pack with 3 LED power Indicator
82 W Lithium Battery
IDX-E80S
V-Mount Battery Pack with PowerLink includes accurate
Power Status Display and supports Digi-View
82 W Lithium Battery
with Power Link
IDX-E80
Marshall Electronics
V-R65P-HD Users Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
V-R65P-HD shown with side mount configuration of V-R65-BA adaptor
and IDX-E50S battery installed
5 Electrical Specifications
Display (Viewing Area)
Viewing Angles
Resolution (RGB Dots)
Contrast Ratio
Dot Pitch
6.5” (5.67”H × 3.10”V) (144.0mm x 78.24mm)
130°H x 120°V
800H x RGBx480V (1.2 million pixels)
400:1
IDX-E50S
V-R65-BA
0.163 mm
Pixel Response
Brightness
System
<25ms
400 cd/m²
NTSC/PAL auto recognition for composite video
Composite with loop (BNC)
HDSDI/SDI with re-clocked output (BNC)
Multiple Analog Format HD-15
Inputs
6 Mechanical Specification
Dimensions
Approx. Weight
7.25”W x 4.25”H x 2.5”D
3 lbs
Power Consumption
Display Viewing Area
12VDC, 5.0 Amps max - UL Class 2 (supply included)
6.5” (5.67”H x 3.10”V) (144.0mm x 78.24mm)
V-R65P-HD shown with V-LCD4-MT camera hot shoe mount attached plus rear mount
configuration of V-R65-BA adaptor and IDX-E50S battery
7 Faceplate Cleaning
When cleaning the faceplate it is very important to use non-abrasive and ammonia free cleaning agents and a clean
micro fiber clothe, or cheese clothe. Do not use paper towels. Paper towel fibers are too coarse and will scratch the
surface of the Plexiglas faceplate. Paper towels may also leave streaks on the surface.
Antistatic and fingerprint resistant Plexiglas cleaning agents are recommended.
IDX-E50S
V-R65-BA
V-LCD4-MT
V-R65P-HD shown with V-H700P hood attached plus side mount configuration of
V-R65-BA adaptor and IDX-E50S battery
Marshall Electronics
V-R65P-HD Users Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
|