Marantz Stereo Receiver SR4000 User Manual

R
Model SR4000 User Guide  
AV Surround Receiver  
SR4000U DFU cover  
Page 5  
00.8.6, 0:51 PM  
Adobe PageM aker6.5J/PPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY  
INSTRUCTIONS  
READ BEFORE OPERATING EQUIPMENT  
This product was designed and manufactured to meet strict quality and  
safety standards. There are, however, some installation and operation  
precautions which you should be particularly aware of.  
11. Grounding or Polarization-This video product is equipped with a  
polarized alternating-current line plug (a plug having one blade  
wider than the other). This plug will fit into the power outlet only  
one way. This is a safety feature. If you are unable to insert the  
plug fully into the outlet, try reversing the plug. If the plug should  
still fail to fit, contact your electrician to replace your obsolete  
outlet. Do not defeat the safety purpose of the polarized plug.  
1. Read Instructions - All the safety and operating instructions  
should be read before the appliance is operated.  
2. Retain Instructions-The safety and operating instructions should  
be retained for future reference.  
3. Heed Warnings-All warnings on the appliance and in the  
operating instructions should be adhered to.  
4. Follow Instructions-All operating and use instructions should be  
followed.  
AC POLARIZED PLUG  
5. Cleaning-Unplug this video product from the wall outlet before  
cleaning. Do not use liquid cleaners or aerosol cleaners. Use a  
damp cloth for cleaning.  
12. Power-Cord Protection-Power-supply cords should be routed so  
that they are not likely to be walked on or pinched by items placed  
upon or against them, paying particular attention to cords at plugs,  
convenience receptacles, and the point where they exit from the  
appliance.  
6. Attachments-Do not use attachments not recommended by the  
video product manufacturer as they may cause hazards.  
13. Protective Attachment Plug - The appliance is equipped with an  
attachment plug having overload protection. This is a safety  
feature. See Instruction Manual for replacement or resetting of  
protective device. If replacement of the plug is required, be sure  
the service technician has used a replacement plug specified by  
the manufacturer that has the same overload protection as the  
original plug.  
7. Water and Moisture-Do not use this video product near water-for  
example, near a bath tub, wash bowl, kitchen sink, or laundry tub,  
in a wet basement, or near a swimming pool, and the like.  
8. Accessories-Do not place this video product on an unstable cart,  
stand, tripod, bracket, or table. The video product may fall,  
causing serious injury to a child or adult, and serious damage to  
the appliance. Use only with a cart, stand, tripod, bracket, or table  
recommended by the manufacturer, or sold with the video  
product. Any mounting of the appliance should follow the  
manufacturer’s instructions, and should use a mounting  
accessory recommended by the manufacturer.  
14. Outdoor Antenna Grounding-If an outside antenna or cable  
system is connected to the video product, be sure the antenna or  
cable system is grounded so as to provide some protection  
against voltage surges and built up static charges. Section 810 of  
the National Electrical Code, ANSI/NFPA No. 70-1984, provides  
information with respect to proper grounding of the mast and  
supporting structure, grounding of the lead-in wire to an antenna  
discharge unit, size of grounding conductors, location of antenna-  
discharge unit, connection to grounding electrodes, and  
requirements for the grounding electrode. See Figure 1.  
9. Ventilation-Slots and openings in the cabinet are provided for  
ventilation and to ensure reliable operation of the video product  
and to protect it from overheating, and these openings must not be  
blocked or covered. The openings should never be blocked by  
placing the video product on a bed, sofa, rug, or other similar  
surface. This video product should never be placed near or over a  
radiator or heat register. This video product should not be placed  
in a built-in installation such as a bookcase or rack unless proper  
ventilation is provided or the manufacturer’s instructions have  
been adhered to.  
15. Lightning-For added protection for this video product receiver  
during a lightning storm, or when it is left un-attended and unused  
for long periods of time, unplug it from the wall outlet and  
disconnect the antenna or cable system. This will prevent damage  
to the video product due to lightning and power-line surges.  
10. Power Sources-This video product should be operated only from  
the type of power source indicated on the marking label. If you are  
not sure of the type of power supply to your home, consult your  
appliance dealer or local power company. For video products  
intended to operate from battery power, or other sources, refer to  
the operating instructions.  
16. Power Lines-An outside antenna system should not be located in  
the vicinity of overhead power lines or other electric light or power  
circuits, or where it can fall into such power lines or circuits. When  
installing an outside antenna system, extreme care should be  
taken to keep from touching such power lines or circuits as contact  
with them might be fatal.  
17. Overloading-Do not overload wall outlets and extension cords as  
this can result in a risk of fire or electric shock.  
18. Object and Liquid Entry-Never push objects of any kind into this  
video product through openings as they may touch dangerous  
voltage points or short-out parts that could result in a fire or  
electric shock. Never spill liquid of any kind on the video product.  
i
SR4000U DFU cover  
Page 1  
00.8.6, 0:51 PM  
Adobe PageM aker6.5J/PPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19. Servicing-Do not attempt to service this video product yourself  
as opening or removing covers may expose you to dangerous  
voltage or other hazards. Refer all servicing to qualified service  
personnel.  
21. Replacement Parts-When replacement parts are required, be  
sure the service technician has used replacement parts specified  
by the manufacturer or have the same characteristics as the  
original part. Unauthorized substitutions may result in fire, electric  
shock or other hazards.  
20. Damage Requiring Service-Unplug this video product from the  
wall outlet and refer servicing to qualified service personnel  
under the following conditions:  
22. Safety Check-Upon completion of any service or repairs to this  
video product, ask the service technician to perform safety checks  
to determine that the video product is in proper operating  
condition.  
a. When the power-supply cord or plug is damaged.  
b. If liquid has been spilled, or objects have fallen into the video  
product.  
23. Carts and Stands-The appliance should be used only with a cart  
or stand that is recommended by the manufacturer.  
c. If the video product has been exposed to rain or water.  
24. An appliance and cart combination should be moved with care.  
Quick stops, excessive force, and uneven surfaces may cause the  
appliance and cart combination to overturn.  
d. If the video product does not operate normally by following the  
operating instructions. Adjust only those controls that are  
covered by the operating instructions as an improper  
adjustment of other controls may result in damage and will often  
require extensive work by a qualified technician to restore the  
video product to its normal operation.  
e. If the video product has been dropped or the cabinet has been  
damaged.  
f. When the video product exhibits a distinct change in  
performance-this indicates a need for service.  
FIGURE 1  
EXAMPLE OF ANTENNA GROUNDING ACCORDING TO  
NATIONAL ELECTRICAL CODE INSTRUCTIONS  
CONTAINED IN ARTICLE 810 - “RADIO AND TELEVISION EQUIPMENT”  
ANTENNA  
LEAD IN  
WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC - NATIONAL ELECTRICAL CODE  
This Class B digital apparatus meets all requirements of the Canadian  
Interference - Cansing Equipment Regulations.  
Cet appareil numérique de la Classe B respecte toutes les exigences  
du Règlement sur le matériel brouilleur du Canada.  
ii  
SR4000U DFU cover  
Page 2  
00.8.6, 0:51 PM  
Adobe PageM aker6.5J/PPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH ...................................................... 1  
FRANÇAIS.................................................. 19  
iii  
SR4000U DFU cover  
Page 3  
00.8.6, 0:51 PM  
Adobe PageM aker6.5J/PPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ1  
GENERAL INFORMATION  
General information  
Scope of supply...............................................................................1  
Maintenance ....................................................................................1  
Setup ...............................................................................................1  
Environmental information...............................................................1  
Trademark acknowledgment ...........................................................1  
Scope of supply  
This receiver is supplied including:  
– a remote control  
– 2 batteries for the remote control, size AA  
– a loop antenna  
– a wire antenna  
– this instruction booklet  
Controls...............................................................................................2  
Remote control  
Remote control usage .....................................................................3  
Remote control buttons ...................................................................4  
Programming the universal remote control .....................................5  
Maintenance  
Clean the receiver with a soft,  
slightly dampened, lint-free  
cloth. Do not use any cleaning  
agents as they may have a  
corrosive effect.  
Connectors..........................................................................................6  
Connections  
Audio connections ...........................................................................7  
Digital Audio connections ................................................................7  
Video connections ...........................................................................8  
Mains ...............................................................................................9  
Speaker connections .......................................................................9  
Antenna connections .......................................................................9  
Do not expose the receiver to  
humidity, rain, sand or  
excessive heat (caused by  
heating equipment or direct  
sunlight).  
System setup  
Positioning of the speakers ...........................................................10  
Speaker setup and testing.............................................................10  
Power handling..............................................................................10  
Headphones ..................................................................................10  
Setup  
Display...............................................................................................11  
Menus  
If you have stacked the components of your system, the  
receiver must be on top. Place the receiver on a flat, hard,  
stabile surface. Do not cover any vents and leave 50 cm  
above and 10 cm left and right of the receiver free for  
ventilation.  
Receiver menu...............................................................................12  
Source selection  
INPUT SELECTOR........................................................................13  
6 CH input selection ......................................................................13  
Reassigning a source selection.....................................................13  
Using one source selection for two or more appliances ...............13  
For good reception the loop antenna should not be placed on  
top of, or beneath VCRs, CD recorders, DVD players, TVs  
and other radiation sources.  
Playback, recording  
Playing a source............................................................................14  
Adjusting the sound.......................................................................14  
Recording from a source ...............................................................14  
Recording from the digital output ..................................................14  
Environmental information  
Surround sound  
All redundant packing material has been omitted. We have  
done our utmost to make the packaging easily separable into  
three mono materials: cardboard (box), polystyrene foam  
(buffer) and polyethylene (bags, protective foam sheet).  
About surround sound ...................................................................15  
Switching surround sound .............................................................15  
Surround sound settings................................................................15  
Tuner  
Tuning to radio stations .................................................................16  
Switching FM sensitivity ................................................................16  
Storing radio stations.....................................................................16  
Tuning to stored radio stations......................................................17  
Resorting stored radio station........................................................17  
Naming radio stations....................................................................17  
Clearing station names..................................................................17  
Your set consists of materials which can be recycled if  
disassembled by a specialized company. Please observe the  
local regulations regarding the disposal of packing materials,  
exhausted batteries and old equipment.  
Trademark acknowledgment  
Technical data  
Manufactured under license from Dolby Laboratories.  
“DOLBY”, “DOLBY DIGITAL”, “PRO LOGIC” and the double-  
D symbol 2 are trademarks of Dolby Laboratories.  
Confidential unpublished works. © 1992–1997 Dolby  
Laboratories. All rights reserved.  
Receiver.........................................................................................18  
Troubleshooting  
Warning .........................................................................................19  
Troubleshooting.............................................................................19  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ2  
CONTROLS  
q
w er t  
y
u
AV SURROUND RECEIVER SR4000  
3D SURROUND  
HALL  
INPUT SELECTOR  
VOLUME  
STANDBY  
PHONO  
DVD  
TUNER  
POWER ON/OFF  
CD  
CDR/  
TAPE  
TV  
VCR  
SAT  
SURROUND  
SURR.MODE  
BAND  
SENS.  
PREV  
MENU  
NEXT  
FRONT AV  
PHONES  
VIDEO  
L
AUDIO  
R
i
BASS  
TREBLE  
ON/OFF  
3D SURROUND  
NAME/FREQUENCY  
DISPLAY  
ENTER/OK  
LOUDNESS  
TUNER PRESET/  
MENU NAVIGATOR  
@
3
@
2
@
0
!
8
!
6
!
4
!
3
!
1
!
0
o
@
1
!
9
!
7
!
5
!
2
POWER ON/OFF  
TUNER PRESET / MENU NAVIGATOR  
q
..............Switches the receiver on and  
off.  
!
TUNER : switches to the next  
and previous stored radio  
station.  
w..........................................Sensor for the infrared remote  
control.  
e3D SURROUND ...............Control light for virtual 3D  
surround.  
MENU : moves upwards and  
downwards.  
PREV.  
rHALL ................................Control light for HALL.  
t..........................................Display  
!
...........................TUNER: searches radio stations.  
MENU: switches to the previous  
menu level.  
INPUT SELECTOR  
y
..........Selects the different audio and  
video connectors.  
MENU  
SENS.  
!
!
...............................Switches the menu on and off.  
...............................Switches between low and high  
tuner sensitivity  
VOLUME  
u
..........................Increases and decreases the  
volume level.  
FRONT AV  
TREBLE  
DISPLAY  
..........................Switches the brightness of the  
i
o
.......................Selects the FRONT AV input.  
...........................Adjusts the treble when used in  
combination with VOLUME.  
!
!
@
@
display.  
BAND  
...............................Switches the wavebands of the  
tuner.  
BASS  
!
!
!
................................Adjusts the bass when used in  
combination with VOLUME.  
NAME/FREQUENCY  
........Switches between name and  
frequency of the display.  
LOUDNESS  
......................Switches LOUDNESS on and  
SURR. MODE  
off.  
...........................TUNER : searches radio  
stations.  
...................Switches through the different  
surround effects.  
NEXT  
@3D SURROUND ...............Switches virtual 3D surround on  
MENU : switches to the next  
menu level.  
.....................Confirms selected menu values.  
and off.  
@SURROUND ON/OFF .............Switches the surround sound on  
and off.  
ENTER / OK  
!
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ3  
REMOTE CONTROL  
Remote control usage  
Open the battery  
compartment of the remote control  
and insert 2 alkaline batteries, type  
MUTE  
AA  
(R06, UM-3).  
Remove batteries if they are flat or  
if the remote control is not going to  
be used for a long time.  
PHONO TUNER  
CD  
CDR/TAPE  
TV  
VCR  
SAT  
DVD  
Batteries contain chemical substances, so they should  
be disposed of properly.  
1
2
5
8
0
3
6
The buttons on the remote control work the same way as the  
corresponding ones on the receiver.  
4
7
Important!  
9
You have to press a source button for longer than 2 seconds  
to switch the sound source on the receiver. Pressing a source  
button for less than 2 seconds will only switch the remote  
control to use the commands for the selected product.  
CABLE BOX  
MENU  
OK  
The remote control remains tuned to the selected source until  
another source button on the remote control is pressed.  
This enables you to operate additional sources (i. e. winding  
a tape) without changing the source on the receiver.  
VOL  
TV VOL  
+
+
This button is invalid.  
-
NEWS T/A  
-
CHANNEL/TRACK  
LOUDNESS  
FR.D.  
SOUND  
DVD REC  
CANCEL  
INDEX  
T-C  
AUDIO  
DISC  
NIGHT  
3D SURR.  
SURR.ON/OFF  
SURR.MODE  
TEST TONE  
SUB WOOFER  
REAR  
+
+
CHANNEL  
SYSTEM REMOTE CONTROLLER  
RC4000SR  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ4  
REMOTE CONTROL  
REC, DVD AUDIO.................CDR, VCR: Starts recording.  
DVD: Switches audio tracks.  
Remote control buttons  
MUTE.............................Mutes the sound of the receiver.  
.....................................Switches the receiver to  
standby.  
CANCEL, DVD ..................CD, CDR, SAT, VCR: Clears a  
program, cancels selections.  
DVD: Switches the view angle.  
PHONO, TUNER, CD,  
CDR/TAPE, TV,  
FR.D., DVD  
....................TUNER: Switches to  
FREQUENCY DIRECT.  
CD, CDR, VCR, DVD: Pauses  
playback.  
VCR,SAT, DVD .....................Switches the remote control to  
the commands of the different  
products. Selects the sources if  
pressed longer than 2 seconds.  
SAT only works with digital  
INDEX, DVD T-C...................VCR: Switches the index search  
on and off.  
SAT: Switches the themes on  
and off.  
DVD: Switches between title  
and chapter.  
satellite receivers.  
1–0.........................................Keys in numbers for tracks,  
stations or frequencies.  
Numbers consisting of two  
figures must be keyed in within  
2 seconds.  
DISC .....................................CD-, CDR-, DVD-Changers:  
Switches to the next disc.  
NIGHT....................................Switches NIGHT MODE on and  
off.  
3D SURR...............................Switches virtual 3D surround on  
and off.  
SURR. ON/OFF.....................Switches SURROUND SOUND on  
and off.  
CABLE BOX ..........................(USA only) Switches the remote  
control to the cable box codes.  
MENU ....................................Switches the menu on and off.  
OK..........................................Confirms menu options.  
Arrow buttons ........................TUNER: Moves in the menus.  
Right/left arrows are tuning  
+/- SUBWOOFER...........Increases/decreases the  
up/down.  
CD,CDR: Left/right arrows are  
subwoofer volume.  
+/- REAR ........................Increases/decreases the volume  
of the rear speakers. While test  
tone is on, the volume of the  
searching backwards / forwards,  
up/down arrows are selecting  
the next/previous track.  
speakers you are hearing can  
be increased/decreased with  
these buttons.  
+ VOL ...................................Increases the receiver volume.  
– VOL ....................................Decreases the receiver volume.  
i NEWS T/A.............................TUNER: Without function.  
TV: Switches teletext on and off.  
SAT: Switches the information text  
on and off.  
+ TV VOL ..........................Increases the TV volume.  
CD, CDR, VCR, DVD: Starts  
playback.  
SURR. MODE........................Scrolls through the different  
surround modes.  
TEST TONE ..........................Switches the test tone on and  
off. While test tone is on, the  
volume of the speakers you are  
hearing can be  
increased/decreased with  
+/- REAR.  
– TV VOL ..........................Decreases the TV volume.  
CD, CDR, VCR, DVD: Stops  
playback.  
CHANNEL/TRACK ........Selects the previous preset  
tuner station.  
VCR: Rewinds the tape.  
CD, CDR, DVD: Selects the  
previous track.  
TV: Selects the previous channel.  
CHANNEL/TRACK ........Selects the next preset tuner  
station.  
VCR: Fast forwards the tape.  
CD, CDR, DVD: Selects the  
next track.  
TV: Selects the next channel  
LOUDNESS...........................Switches LOUDNESS on and  
off.  
SOUND..................................Scrolls through the different  
smart sounds.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ5  
REMOTE CONTROL  
Once you have found and tested the codes for your various  
appliances, you may want to write them down here.  
Programming the universal remote control  
You can identify the universal remote control by the  
inscription Multibrand / Universal.  
PHONO........................................  
CD................................................  
CDR/TAPE...................................  
TV ................................................  
VCR .............................................  
SAT..............................................  
DVD .............................................  
CABLE BOX ................................  
The universal remote control must be programmed to use the  
codes for your appliances of different brands. This is done by  
keying in a 4-digit code or by scanning the codes until the  
correct one is found. We recommend to using the 4-digit  
code. This method is faster and more reliable. The code  
scanning method should be used only if you cannot find the  
code for one of your appliances. The codes are listed at the  
end of this book.  
Important!  
Use the remote control buttons for programming, not the  
buttons of the receiver or other appliances.  
Programming with the 4-digit code  
1 Keep the source button for the appliance which should be  
controlled and  
pressed for 3 seconds.  
2 Key in the 4-digit code for the appliance (codetable at the  
end of the booklet).  
Resetting the remote control  
1 Keep one of the source buttons and  
pressed for 3  
seconds.  
Notes: – If more than 4 digits are entered, the remote  
control will recognize only the ones keyed in first.  
– If you do not key in a code within 30 seconds the  
remote control will switch off the programming  
function without changing the code.  
2 Key in the 3-digit code 981.  
The remote control is now reset to all its original Marantz  
codes.  
– To program a new appliance, simply overwrite the  
old code by entering a new one.  
Scanning the codetable  
1 Switch on the appliance which should be controlled.  
2 Keep the source button for the appliance which should be  
controlled and  
pressed for 3 seconds.  
3 Press and release  
again.  
The remote control sends the codes for channel up or  
standby (depending on the selected source) for one  
brand after the other.  
4 As soon as the appliance reacts – switches to the next  
channel or to standby – press  
to confirm the code.  
The identified code will be used.  
• If the set does not react within 2 minutes, the code for this  
appliance is not stored in the remote control. The code of  
the remote control will remain unchanged.  
Note: When taking out the batteries of the remote control for  
more than 1 minute the codes must be reprogrammed.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:40 PM ージ6  
CONNECTORS  
!
7
8
!
9
@
@
9
@
0
2
@
1
3
@
4
5
@
@
7
r e  
#
1
#
0
!
@
@
@
6
8
AV SURROUND RECEIVER SR4000  
PHONO  
GND  
STANDBY  
FRONT  
AAMM LLOOOOPP  
ANTENNA  
POWER ON/OFF  
SPEAKERS  
CENTER  
R
L
REMOTE  
CONT.  
EACH SPEAKER  
FM 300  
DIGITAL AUDIO  
IN/OUT  
6  
AC OUTLET  
120W/1A MAX.SWITCHED  
6 CHANNEL/DVD  
INPUT  
VIDEO  
SUB WOOFER  
PRE-OUT  
120V  
60HZ  
DVD  
MON  
VCR  
SAT  
IN  
COAX  
1
2
SURROUND SPEAKERS  
EACH SPEAKER 6Ω  
IN  
IN  
OUT  
TV  
IN  
OUT  
CENTER  
SUB -  
WOOFER  
AUDIO  
CENTER  
COAX  
IN  
PHONES  
PHONO  
SURR. FRONT  
VCR  
SAT  
CD  
CDR/TAPE  
PRE-OUT  
VIDEO  
L
AUDIO  
R
L
COAX  
OUT  
R
IN  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
w
q
!6  
!
!
4
!
!
3
2
!
! i y  
0
5
1
o u  
t
Connectors  
6.3 mm headphone socket qPHONES  
Connectors name  
Connect to:  
A headphone with a 6.3 mm plug.  
at the front  
Audio and video inputs  
at the front  
wFRONT AV  
Audio and video out sockets of appliances such as video cameras  
and game consoles.  
FRONT SPEAKERS  
eR, L  
rCENTER  
tR, L  
uCDR/TAPE OUT  
iCDR/TAPE IN  
oCD IN  
Right and left front speaker.  
Center speaker.  
Right and left surround speaker.  
Input of a CD recorder or a tape deck.  
Output of a CD recorder or a tape deck.  
Output of a CD player.  
SURROUND SPEAKERS  
AUDIO IN/OUT  
!SAT IN  
!VCR OUT  
!VCR IN  
Output of a satellite system.  
Input of a video recorder.  
Output of a video recorder.  
Output of a TV.  
!TV IN  
!PHONO IN  
!PHONO GND  
!COAX OUT  
Output of a turntable with MM coil.  
Ground cable of a turntable.  
Coaxial input of digital appliances such as CD recorders or MD  
recorders.  
DIGITAL AUDIO IN/OUT  
!COAX 2 IN  
!COAX 1 IN  
!OPTICAL IN  
Coaxial output of digital appliances.  
Coaxial output of digital appliances.  
Optical output of digital appliances such as DVD players, CD players,  
CD recorders or MD players.  
6-channel input  
VIDEO IN/OUT  
@ 6 CHANNEL/DVD INPUT 6-channel output of appliances such as DVD or Laserdisc players.  
@DVD IN  
@MON OUT  
@VCR IN  
@VCR OUT  
@SAT IN  
Output of a DVD player.  
Input of a monitor (e. g. the TV).  
Output of a video recorder.  
Input of a video recorder (for recording).  
Output of a satellite system..  
Antenna connectors  
Preamplified outputs  
@
AM LOOP  
Frame antenna supplied.  
Wire antenna supplied or exterior antenna.  
Input of a amplifier of center sperker.  
@FM 300  
yCENTER PRE-OUT  
@
SUBWOOFER PRE-OUT Input of a powered subwoofer.  
Remote control bus  
Mains outlets  
Mains lead  
@REMOTE CONT.  
#AC OUTLET  
#
Connect to a component equipped with MARANTZ remote control jack  
Supplies same voltage as mains. Up to 100 W total permitted load.  
After all other connections have been made, connect the  
mains lead to the wall socket.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ7  
CONNECTIONS  
Audio connections  
There are analogue and digital connectors available on some  
appliances. If possible use the digital connection; usually this  
will result in better sound quality. See “Reassigning a source  
selection” on how to use the digital connectors of the  
receiver.  
MONITOR / TV  
Because of a different kind of output signal, the use of Dolby  
Digital Laserdisc requires an optional AC-3 RF demodulator.  
TURN TABLE  
DVD PLAYER  
(6 Channel Output)  
PHONO  
GND  
FRONT  
AAMM LLOOOOPP  
SPEAKERS  
CENTER  
R
L
ANTENNA  
REMOTE  
CONT.  
EACH SPEAKER  
FM 300  
DIGITAL AUDIO  
IN/OUT  
6  
AC OUTLET  
120W/1A MAX.SWITCHED  
120V 60HZ  
6
INPUT  
CHANNDVD  
VIDEO  
SUB WOOFER  
PRE-OUT  
DVD  
MON  
VCR  
SAT  
IN  
COAX  
IN  
1
2
SURROUND SPEAKERS  
EACH SPEAKER 6Ω  
IN  
OUT  
TV  
IN  
OUT  
CENTER  
SUB -  
WOOFER  
AUDIO  
CENTER  
PRE-OUT  
COAX  
IN  
PHONO  
SURR. FRONT  
VCR  
SAT  
CD  
CDR/TAPE  
L
COAX  
OUT  
R
IN  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
CD RECORDER  
IN  
OUT  
VCR  
AUDIO OUT  
AUDIO IN  
CD PLAYER  
SAT RECEIVER  
Digital Audio connections  
DVD PLAYER  
(6 Channel Output)  
PHONO  
GND  
FRONT  
AAMM LLOOOOPP  
SPEAKERS  
CENTER  
R
L
ANTENNA  
REMOTE  
CONT.  
EACH SPEAKER  
FM 300Ω  
DIGITAL AUDIO  
IN/OUT  
6Ω  
AC OUTLET  
120W/1A MAX.SWITCHED  
120V 60HZ  
6 CHANNEL/DVD  
INPUT  
VIDEO  
SUB WOOFER  
PRE-OUT  
DVD  
MON  
VCR  
SAT  
COAX  
IN  
1
2
SURROUND SPEAKERS  
EACH SPEAKER 6Ω  
IN  
OUT  
TV  
IN  
OUT  
IN  
CENTER  
SUB -  
WOOFER  
AUDIO  
CENTER  
PRE-OUT  
COAX  
IN  
PHONO  
SURR. FRONT  
VCR  
SAT  
CD  
CDR/TAPE  
L
COAX  
OUT  
R
IN  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
CD RECORDER  
CD PLAYER  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ8  
CONNECTIONS  
Video connections  
DVD PLAYER  
MONITOR / TV  
PHONO  
GND  
FRONT  
AAMM LLOOOOPP  
ANTENNA  
SPEAKERS  
CENTER  
R
L
REMOTE  
CONT.  
EACH SPEAKER  
FM 300Ω  
DIGITAL AUDIO  
IN/OUT  
6Ω  
AC OUTLET  
120W/1A MAX.SWITCHED  
120V 60HZ  
6
INPUT  
CHANNEL/DVD  
VIDEO  
SUB WOOFER  
PRE-OUT  
DVD  
MON  
VCR  
SAT  
IN  
COAX  
IN  
1
2
SURROUND SPEAKERS  
EACH SPEAKER 6Ω  
IN  
OUT  
TV  
IN  
OUT  
CENTER  
SUB -  
WOOFER  
AUDIO  
CENTER  
PRE-OUT  
COAX  
IN  
PHONO  
SURR. FRONT  
VCR  
SAT  
CD  
CDR/TAPE  
L
COAX  
OUT  
R
IN  
IN  
IN  
OUT  
IN  
IN  
IN  
OUT  
VCR  
VIDEO OUT  
VIDEO IN  
SAT RECEIVER  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ9  
CONNECTIONS  
Mains  
Antenna connections  
AM antenna  
The type plate is located on the rear of the receiver.  
The loop antenna supplied is for indoor use only. Position the  
antenna as far away as possible from the receiver, the TV,  
the cables, a DVD player, a VCR and other radiation sources.  
1 Check whether the mains voltage as shown on the type  
plate corresponds to your local mains voltage. If it does not,  
consult your dealer or service organization.  
1 Fit the plug of the frame antenna to AM LOOP as shown  
2 Connect the mains cable to the wall socket.  
below.  
To disconnect the set from the mains completely, remove the  
mains plug from the wall socket.  
2 Turn the antenna for optimum reception.  
ANTENNA  
Speaker connections  
Some of the speaker connections on the receiver are screw  
connectors and some are click-fit connectors. Use them as  
shown below.  
O
LO  
M
A
FM antenna  
The wire antenna supplied can only be used to receive  
nearby stations. For better reception we recommend using a  
cable antenna system or an outdoor antenna.  
1
1
2
2
3
3
1 Open the FM 300 click-fits by pushing the lever down as  
shown below.  
2 Insert each wire of the antenna into one hole.  
m
8 m  
3 Close the click-fits using the lever.  
1 Always connect the coloured (or marked) wire to the red  
terminal and the black (or unmarked) wire to the black  
terminal.  
4 Move the antenna in different positions for optimum  
reception.  
2 Connect:  
– Left front speaker to L  
– Right front speaker to R  
– Center speaker to CENTER  
– Left surround speaker to SURROUND L  
– Right surround speaker to SURROUND R  
m
8 m  
1
2
3
The unit complies with the FCC-Rules, Part 15. Operation  
is subject to the following two conditions:  
1. This device may not cause harmful interference, and  
2. This device must accept any interference received,  
including interference that may cause undesired  
operation.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ10  
SYSTEM SETUP  
CENTER  
Speaker setup and testing  
The relative volume of the speakers must be adjusted for  
optimal surround sound. You should be at your usual listening  
position when adjusting the speaker volume. See “Receiver  
menus” on how to set up the receiver for the used speakers.  
RIGHT  
LEFT  
1 Press POWER ON / OFF to switch on the receiver.  
SURROUND  
(REAR)  
SURROUND  
(REAR)  
RIGHT  
LEFT  
2 Press TEST TONE on the remote control.  
A test tone coming from the different speakers, except  
the subwoofer, is heard.  
Positioning of the speakers  
General hints for positioning  
Avoid positioning the speakers in a corner or on the floor as  
this will boost the bass tones too much. Placing the speakers  
behind curtains, furniture, etc. will reduce the treble response.  
The listener should always be able to ”see” the speakers.  
3 Press +/- REAR on the remote control to  
increase/decrease the volume of the actual speaker. The  
best result is achieved when all speakers have equal  
volume in the listening position.  
4 Press TEST TONE on the remote control.  
The test tone stops.  
Each room has different acoustic characteristics and the  
positioning possibilities are often limited. You can find the  
best position for your speakers by referring to the picture  
above.  
Note: If you are not completely satisfied with the volume  
settings, we recommend making minor adjustments to  
them during surround sound playback.  
As a minimum we recommend 5 speakers (2 front, a center,  
2 surround) for good surround sound. It is possible to  
reproduce some kind of surround sound with fewer speakers.  
This is done by redirecting the signals which are foreseen for  
the missing speakers to the existing ones. See “Menus” on  
how to set up the receiver correctly for the number and size  
of the speakers used.  
Power handling  
If the receiver is used at very high power, it can produce  
distortions which may seriously damage your speakers.  
If distortions occur, reduce the volume and the tone controls  
to a level where the sound is acceptable again.  
Positioning the front speakers  
The front speakers should be placed right and left in front of  
the listening position like usual stereo speakers.  
To avoid overheating of the set a safety circuit has been  
built in. Therefore your set may disconnect under  
extreme conditions. If this happens, switch the set off  
and let it cool down before reusing it.  
Positioning the center speaker  
The center speaker should be placed in the center between  
the two front speakers, e. g. underneath or on top of the TV.  
The best height for the center speaker is the height of the  
listener’s ears (while seated).  
Headphones  
Connecting headphones to PHONES will switch off the  
speakers. The receiver switches to  
and surround  
sound will be reduced to a stereo signal which is reproducible  
by standard headphones.  
Positioning the surround speakers  
The surround speakers should face each other and be in line  
with, or slightly behind the listener.  
Disconnecting the headphones switches on the speakers  
again. If you wish to enjoy surround sound again, switch the  
receiver back to surround sound.  
Positioning the subwoofer  
A subwoofer can be used to enhance the bass performance  
of your system dramatically. The subwoofer can be positioned  
anywhere in the room, because it is not possible to locate the  
source of deep tones. Nevertheless, you should not place the  
subwoofer in the middle of a room, since the bass could be  
severely weakened. Do not place any object on the  
subwoofer.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ11  
DISPLAY  
Status lights  
Display  
The display of the receiver is divided into 3 sections, which  
are to be used for the following:  
Speaker diagram  
Signs showing you various settings and information about the  
status of the receiver.  
PRESET .....................Tuner is tuned to a preset radio station.  
SENS HI.....................Tuner is switched to high sensitivity.  
SENS LO....................Tuner is switched to low sensitivity.  
STEREO.....................An FM station is being received in stereo.  
SMART SOUND ...........One of the preset sound settings of the  
receiver is being used.  
A rectangle with a letter in it shows that a speaker has been  
selected in the setup menu. However, the subwoofer indicator  
will only light when a subwoofer signal is available. If only a  
letter is shown, this speaker is not used and its sound is  
reproduced by the other speakers.  
HALL.........................HALL effect is on.  
ANA ..........................Analogue input is being used for the  
playing source.  
NIGHT.......................NIGHT MODE is on.  
COAX 1 .....................Coaxial digital input COAX 1 is being  
used for the playing source.  
COAX 2 ....................Coaxial digital input COAX 2 is being  
used for the playing source.  
......virtual 3D surround  
SURROUND ................surround sound is reproduced  
DIGITAL SURROUND ....digital surround sound is reproduced  
L, R ..........................front left and right speaker  
C..............................center speaker  
SL, SR.......................surround speakers  
SW............................subwoofer  
DOWNMIX..................Incoming multi channel signals are being  
reduced to fewer output signals  
Menu indication  
(depending on the number of speakers).  
OPT ..........................Optical digital input OPTICAL IN is being  
used for the playing source.  
LOUDNESS.................LOUDNESS is switched on.  
These signs show you if the menu is on or off and indicate in  
which direction you may move.  
Information area  
MENU .......................Menu is on.  
............................You may move backwards to the  
previous menu topic using  
PREV. (“left” key on the remote control).  
............................You may move up in an option list  
using MENU NAVIGATOR (“up” key on  
the remote control).  
This area is used for feedback of the receiver, tuner  
frequencies, menu options, values and scrolling text  
messages.  
............................You may move down in an option list  
using MENU NAVIGATOR (“down” key  
on the remote control).  
............................You may move forward to the next menu  
topic using NEXT (“right” key on the  
remote control).  
OK............................You may confirm the displayed value.  
0
MENU  
OK  
VOL  
TV VOL  
+
+
-
-
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 1:13 PM ージ12  
MENUS  
Receiver menu  
The receiver is equipped with a menu system. The menu is  
used for the setup of the receiver. The different menu options  
are related to each other in a logical way. Let’s assume you  
have no center speaker connected, and therefore switched  
Chooses the speaker sizes of the used speakers, for  
optimal sound reproduction. indicates a speaker  
which can reproduce frequencies lower than 50 Hz. If  
is set to  
. If  
,
can  
only be set to  
,
is set to  
can only be set to  
to  
. If you try to use  
, a message will be  
and consequently a subwoofer must be connected.  
scrolled that this is not possible  
(
).  
Subwoofer present: yes/no  
The menu always works the same way. Arrows in the display  
show you the possible moving directions.  
Left and right front speakers: small/large  
Center speaker: small/large  
1 Press MENU.  
MENU, and  
is displayed.  
Rear speakers: small/large  
You can exit the menu at any time by pressing MENU.  
Distance between the usual listening position and the  
speakers. This defines the delay time for the surround sound.  
2 Turn MENU NAVIGATOR until the desired option (or a  
value) is displayed.  
Distance to front speakers: 1…10 m (3…30 ft)  
Distance to center speaker: 1…10 m (3…30 ft)  
Distance to rear speakers: 1…10 m (3…30 ft)  
3 Press NEXT to choose the displayed option (or  
ENTER / OK to confirm a value).  
• You can leave any option (values remain unchanged) by  
pressing PREV.  
Assigns the audio input connectors to the different source  
selections chosen with INPUT SELECTOR (see “SOURCE  
SELECTION” for details).  
Menu structure  
Switches sound effects.  
virtual 3D surround: 0…100 %  
Digital coaxial input 1, COAX 1 IN  
Digital coaxial input 2, COAX 2 IN  
Digital optical input, OPTICAL IN  
Analogue audio input SAT IN  
Analogue audio input VCR IN  
Analogue audio input TV IN  
Adjusts the relative volume balance between the  
connected speakers.  
Test tone: on/off  
Volume front left speaker: –50…+50  
Volume front right speaker: –50…+50  
Volume center speaker: –50…+50  
Volume rear left speaker: –50…+50  
Volume rear right speaker: –50…+50  
Volume subwoofer: –50…+50  
Analogue audio input CDR IN  
Analogue audio input CD IN  
Analogue audio input 6 CHANNEL IN  
Setup for preset radio stations (see TUNER for  
details).  
Stores radio stations automatically  
Stores radio stations manually  
Selects the used speakers.  
Subwoofer present: yes/no  
Center speaker present: yes/no  
Rear speakers present: yes/no  
Allows to assign names to stored radio  
stations  
Resorts stored radio stations  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ13  
SOURCE SELECTION  
Using one source selection for two or more  
appliances  
INPUT SELECTOR  
When selecting a source by turning INPUT SELECTOR,  
You may assign more than one source to a source selection.  
This can be useful when products are connected one after  
the other in a chain.  
the audio and video inputs with the corresponding name are  
activated. The incoming signal is reproduced by all audio and  
– if the source includes a video signal – video outputs of the  
receiver.  
Example: A VCR is connected to the TV but only the TV is  
connected to the receiver. Both INPUT SELECTOR  
settings, TV as well as VCR, have to use the TV  
input connectors.  
Source selected .........Connectors used  
DVD .............................COAX 1 digital audio input and  
DVD IN video input  
PHONO........................PHONO IN audio input  
1 Choose  
NEXT 3.  
from the menu and press  
TUNER ........................The tuner part of the receiver is used,  
all inputs are switched off.  
CD................................CD IN audio input  
2 Turn INPUT SELECTOR to select the source which should  
be reassigned (e. g. ).  
CDR/TAPE...................CDR/TAPE IN audio input  
The name of the source is displayed and the light of the  
TV ................................TV IN audio input and  
no video input  
source flashes.  
VCR .............................VCR IN audio input and  
VCR IN video input  
3 Turn MENU NAVIGATOR to select the input connectors  
which should be used (e. g.  
).  
SAT..............................SAT IN audio input and  
SAT IN video input  
4 Press ENTER / OK to confirm your selection.  
is displayed briefly.  
6 CH input selection  
5
This source selection is now using the chosen audio input (e. g.  
The 6 channel input connectors can be assigned to any of the  
available sources (excluding TUNER and PHONO). The  
assignment can be done via the  
the menu.  
uses the TV IN input connectors,  
is  
displayed briefly when switching to VCR).  
option in  
See below for more details.  
Reassigning a source selection  
If a source is selected with INPUT SELECTOR the standard  
audio input is used. To change this, the source selection must  
be reassigned to another audio input.  
Example: Reassigning  
from the analogue CD IN audio  
input to the digital COAX 2 IN audio input.  
1 Choose  
NEXT 3.  
from the menu and press  
2 Turn INPUT SELECTOR to select the source which should  
be reassigned (e. g. ).  
The name of the source is displayed and the light of the  
source flashes.  
3 Turn MENU NAVIGATOR to select the input connectors  
which should be used (e. g.  
).  
4 Press ENTER / OK to confirm your selection.  
is displayed briefly.  
5 This source selection is now using the chosen audio input  
(e. g. uses the COAX 2 IN input connectors, COAX  
lights when switching to CD).  
2
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ14  
PLAYBACK, RECORDING  
Playing a source  
Recording from a source  
1 Press POWER ON / OFF to switch on the receiver.  
If you wish to record from a source you must select it with  
INPUT SELECTOR. The incoming signal is reproduced by all  
audio and – if the source includes a video signal – video  
outputs of the receiver. The sound settings do not affect the  
recording.  
2 Turn INPUT SELECTOR to select a source.  
The name of the source is displayed.  
• You can select the FRONT AV input by pressing FRONT  
AV.  
1 Turn INPUT SELECTOR (or press FRONT AV) to select  
the source you want to record from.  
3 Start playback of the source as usual.  
The name of the source is displayed.  
2 Prepare the desired recording appliance. It must be  
connected to one of the outputs of the receiver.  
Adjusting the sound  
• Turn VOLUME to adjust the volume.  
and the volume level between and  
is  
3 Start recording on the recording appliance.  
displayed.  
4 Start the playback of the source as usual.  
1 Press BASS or TREBLE.  
or  
and the actual value are displayed  
Notes: – The audio and video signal of VCR IN is not  
reproduced by VCR OUT. The same applies to  
the audio signal of CDR/TAPE IN to CDR/TAPE  
OUT.  
briefly. Then  
is scrolled.  
2 Turn VOLUME to adjust the bass or treble.  
We recommend not to use the digital output  
COAX OUT of the receiver to record from an  
analogue source. Use the analogue output  
CDR/TAPE instead.  
or  
and the actual value are  
displayed.  
Note : If VOLUME is not turned within 5 seconds or if any  
other control is used, the bass or treble adjustment is  
switched off.  
Recording from the digital output  
It is possible to connect a digital recorder to the digital output of  
the receiver. In this way, all signals coming from the digital  
inputs can be recorded directly on the connected audio  
recorder. The receiver will also convert all signals coming from  
the analogue inputs to the digital output.  
• Press SOUND on the remote control to scroll through the  
built-in smart sounds:  
and  
,
,
,
. (  
is the  
userdefined bass and treble setting.)  
SMART SOUND is displayed and the name of the chosen  
sound profile is scrolled once if smart sound is on.  
The receiver can be used to record digitally a multichannel  
surround sound audio signal (Dolby Digital) from, for example,  
DVD to CD-R. The receiver will convert the digital multichannel  
signal into a stereo signal without loss of relevant sound  
information.  
• Press LOUDNESS to switch loudness either on or off.  
LOUDNESS is displayed if loudness is on.  
Notes: – Do not use the 3D SURROUND feature while  
making digital recordings as this will distort the  
digital audio signal.  
When recording a Dolby Digital signal, each track  
must be recorded individually.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ15  
SURROUND SOUND  
About surround sound  
Surround sound settings  
Surround sound gives you a complete new listening  
sensation. You will have the feeling of being in the middle of  
the action, because sound is coming from everywhere around  
you. Look out for TV broadcasts, audio and video tapes and  
discs with the 3 or 1 marks which are  
encoded for multichannel surround sound. You should prefer  
Dolby Digital to get the best out of your receiver.  
The sound reproduction is enhanced and a slight echo is  
added. This gives the impression of being in a large room.  
Can only be used in stereo mode.  
The surround mode enables normal surround sound  
reproduction with 4 or 5 speakers. Depending on the source  
material, Dolby Surround Pro Logic, Dolby Digital is reproduced.  
Notice that DVDs do not always carry full multichannel  
surround. To be sure that a disc is multichannel encoded  
consult your dealer.  
,
In addition to  
, the surround mode used –  
Most ordinary stereo tapes and discs can be replayed using  
surround sound settings with good results. If the reproduction  
is distorted in surround mode, switch to normal stereo mode.  
depending on the source material – will be displayed. In case  
of digital surround, the sound format AC-3 (for Dolby Digital) will  
be displayed, followed by the sound channels, available on the  
source (e. g. DVD).  
The availabilty of the various surround sound modes  
described depends on the number of speakers used and the  
incoming sound information.  
Example:  
Dolby Digital, 3 front channels,  
2 surround channels and a  
subwoofer channel.  
Dolby Digital, 3 front channels, 1  
(mono) surround channel without  
subwoofer signal.  
Switching surround sound  
With surround sound on, you can switch through the different  
surround modes. Note that the possibilities are related to  
speaker setup defined in the receivers menu.  
The surround sound is muted. 3 Stereo lets you listen to  
surround sound without using the surround speakers.  
If a digital surround signal is detected, the receiver will scroll  
either  
.
1 Press SURROUND ON/OFF to switch on the surround  
sound.  
The surround mode in use is scrolled.  
The sound of the rear channel is simulated by the front  
speakers. Surround sound is simulated through the front left,  
right and center speakers. The position of the listener  
influences the surround effect. The area where the effect is  
best is shown in grey.  
2 Press SURR. MODE repeatedly to listen to the different  
surround modes (if available).  
The chosen mode and the speakers used are  
displayed. If the incoming multichannel signals are  
reduced to fewer output signals, DOWNMIX is displayed.  
CENTER  
RIGHT  
LEFT  
3 Press 3D SURROUND to switch virtual 3D surround either  
on or off.  
A light indicates if virtual 3D surround is on.  
4 Press SURROUND ON/OFF to switch off the surround  
sound.  
is scrolled.  
All sound is reproduced and played through the front left and  
right speakers. This enables standard stereo reproduction.  
NIGHT MODE (only on the remote control)  
The loud parts of the sound are lowered and the soft  
passages are raised. You can enjoy surround sound without  
disturbing sleeping children or neighbours. Night mode only  
works with Dolby Digital, and only if supported by the source  
material.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:41 PM ージ16  
TUNER  
Tuning to radio stations  
Storing radio stations  
You can search for radio stations by scanning the frequency  
You may store up to 30 radio stations in the memory. The  
receiver can select and program radio stations by itself or you  
can choose them yourself.  
band. You can also key in the frequency of a known radio  
station. If an FM station is being broadcast and received in  
stereo, STEREO is shown.  
Automatic programming  
Searching for radio stations  
1 Choose  
from the menu and press NEXT  
.
1 Turn INPUT SELECTOR to select the tuner.  
is displayed.  
2 Choose  
and press NEXT  
.
The preset number where programming will start, the  
2 Select a waveband by pressing BAND repeatedly.  
waveband and are displayed.  
The selected waveband is displayed.  
3 Turn TUNER PRESET to change the preset number where  
3 Keep or pressed for approximately 1 second.  
programming should start.  
is displayed and the tuner tunes to a station  
with sufficient strength.  
4 Use BAND to switch to the desired waveband.  
4 Repeat this procedure until you find the desired station.  
5 Press ENTER / OK to start programming.  
flashes and all available radio  
stations are programmed, this may take a few minutes.  
• To fine tune to a weak transmitter, briefly press or as  
often as necessary for optimum reception.  
Programming is done when  
flashing.  
stops  
Tuning to a radio station by frequency (with the remote  
control only)  
Manual programming  
1 Press TUNER.  
1 Choose  
from the menu and press NEXT  
and press NEXT  
.
is displayed.  
2 Choose  
.
2 Press TUNER again to select a different waveband.  
The selected waveband is displayed.  
A preset number, the waveband and the frequency are  
displayed.  
3 Press FR. D..  
3 Turn TUNER PRESET to change to the preset number  
_ is displayed.  
where the radio station should be stored.  
4 Use 1–0 to key in the frequency of a radio station.  
4 Tune to the desired radio station (see “Searching for radio  
stations”).  
Note: Only valid numbers within the frequency range of the  
tuner can be keyed in.  
5 Press ENTER / OK to confirm your selection.  
is displayed briefly. The radio station is  
programmed at the chosen preset number.  
Switching FM sensitivity  
You can switch the tuner to a lower search sensitivity, to  
search for stations with a strong signal only (FM only).  
6 Select and store all desired radio stations this way.  
1 Turn INPUT SELECTOR to select the tuner.  
is displayed.  
2 Press SENS. on the receiver.  
Either SENS HI or SENS LO is displayed for 5 seconds.  
Note: While searching for radio stations, the actual sensitivity  
is displayed. In this case, SENS LO means the tuner is  
only looking for radio stations with a strong signal.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:42 PM ージ17  
TUNER  
Tuning to stored radio stations  
Naming radio stations  
1 Turn INPUT SELECTOR to TUNER to select the tuner.  
is displayed.  
It is possible to assign a name to any of the preset radio  
stations.  
2 Turn TUNER PRESET to select a preset radio station.  
PRESET, the preset number and station are displayed.  
1 Choose  
from the menu and press NEXT  
and press NEXT  
.
2 Choose  
.
A preset radio station is displayed.  
Resorting stored radio stations  
After programming radio stations, you might want to change  
3 Turn TUNER PRESET to select the preset to be renamed.  
their sequence.  
allows you to exchange the  
positions of presets.  
4 Press ENTER / OK to confirm your selection.  
The existing name or ________ is displayed.  
1 Choose  
from the menu and press NEXT  
and press NEXT  
.
5 Turn TUNER PRESET to select a letter and NEXT or  
PREV. to move to the next or previous position.  
2 Choose  
.
PRESET, a preset number and station are displayed.  
3 Turn TUNER PRESET to select a preset station.  
4 Press ENTER / OK to confirm the selection.  
6 After you have entered the entire name, press ENTER / OK  
to confirm.  
is displayed and the name is stored.  
The selected preset number  
and a second  
Clearing station names  
preset number are displayed.  
1 Use the menu option  
, choose  
.
5 Turn TUNER PRESET to select the other preset station.  
A preset radio station is displayed.  
6 Press ENTER / OK to confirm the exchange.  
2 Turn MENU NAVIGATOR to select the name to be cleared.  
3 Press ENTER / OK to confirm your selection.  
is displayed briefly and these two  
preset numbers are swapped.  
4 Press PREV. while the first letter is flashing.  
is flashing to the left of the station name.  
5 Press ENTER / OK to clear the station name.  
Or, if you have changed your mind,  
press PREV. to leave the station name as it is.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:42 PM ージ18  
TECHNICAL DATA  
Receiver  
Subject to modification without notice.  
General  
Power consumption .................................................... 195 W  
Standby power consumption...........................................< 2 W  
Dimensions, w × h × d...........................440 × 138 × 394 mm  
Weight.............................................................................9.4 kg  
Amplifier part (0.7 % THD, 6 / 8 , 1 kHz)  
Output power, stereo mode..............................2 × 100 / 80 W  
Output power, surround mode  
Front...........................................................2 × 100 / 80 W  
Center...............................................................100 / 80 W  
Surround ......................................................2 × 50 / 40 W  
Bass ...............................................................±9 dB at 100 Hz  
Treble .............................................................±9 dB at 10 kHz  
Loudness+6 dB at 100 Hz (-30 dB); +3 dB at 10 kHz (-30 dB)  
Total harmonic distortion........................0.05 % at 1 kHz, 1 W  
Frequency response...............................20–30,000 Hz, 1 dB  
S/N ratio....................................................................... 82 dB  
Stereo separation (1 kHz)............................................ 45 dB  
Crosstalk (1 kHz)........................................................ -65 dB  
Inputs  
Linear inputs ..................................................250 mV at 47 k  
Front AV.........................................................250 mV at 22 k  
Phono.................................................................5 mV at 47 k  
Digital coaxial .............................................75 acc. IEC 958  
Outputs  
Power supply AC outlets (switched)...........totally max. 120 W  
Linear outputs ..................................................250 mV at 1 k  
Digital coaxial .............................................75 acc. IEC 958  
Digital optical ..................................................................toslink  
Subwoofer pre-out ...............................................0.8 V at 1 k  
Center pre-out......................................................0.8 V at 1 k  
Headphones....................................8–600 (3 V e.m.f., 60 )  
Speakers.......................................................................... 6  
Tuner part  
Wave range  
FM............................................................87.5–108.0 MHz  
AM..............................................................530–1,700 kHz  
Sensitivity  
Stereo FM ................................................................41 dBf  
Mono FM..................................................................17 dBf  
Total harmonic distortion  
Stereo FM .................................................................0.8 %  
Mono FM...................................................................0.9 %  
Frequency response................................63–12,500 Hz 1 dB  
S/N ratio  
Stereo FM .................................................................55 dB  
Mono FM...................................................................60 dB  
Channel separation...........................................27 dB at 1 kHz  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(Eng) DFU 00.8.6 0:42 PM ージ19  
TROUBLESHOOTING  
If a fault occurs, first check the points listed below before  
taking the speakers for repair.  
WARNING  
Under no circumstances should you try to repair  
anything by yourself, as this will invalidate the  
guarantee. Do not open the set as there is a risk of  
electric shock.  
If you are unable to solve a problem by following these hints,  
consult your dealer or service center.  
PROBLEM  
POSSIBLE CAUSE  
SOLUTION  
No sound  
VOLUME is not correctly adjusted.  
Headphones are connected.  
The wrong source is selected.  
Adjust the VOLUME.  
Disconnect headphones.  
Turn INPUT SELECTOR to select the correct  
source.  
No sound on the  
left or right side  
One speaker is wrongly connected.  
A speaker cable is damaged.  
Connect the speaker properly.  
Replace the cable.  
Volume balance in the receiver menu is  
wrongly adjusted.  
Adjust  
in the receiver menu.  
and  
Poor sound or no sound at  
the center or surround  
speakers  
SURROUND mode is not switched on.  
Press SURROUND ON/OFF to switch on the  
surround sound.  
Surround and/or center speakers are not  
(properly) connected.  
Connect the speakers properly.  
Surround and/or center speakers are  
Set speaker present to  
.
switched off in the  
menu.  
A speaker cable is damaged.  
Speakers are not in phase.  
Replace the cable.  
Poor bass sound  
Bad sound  
Connect the coloured (or marked) wires to the  
coloured terminals and the black (or unmarked)  
wires to the black terminals.  
Badly matching setting for the given type of  
music or sound.  
Correct the sound settings on the receiver.  
Surround sound level is  
too low or too high  
The level of the surround sound is not  
properly adjusted.  
Adjust the level of the surround sound on  
the receiver.  
Center sound level is too  
low or too high  
The sound level of the center channel is not  
properly adjusted.  
Adjust the level of the center channel  
on the receiver.  
Only center speaker is  
heard in Dolby Surround  
Pro Logic  
A mono signal is reproduced.  
Choose a different sound source or switch off  
surround sound.  
Bad radio reception,  
automatic programming  
does not work properly  
Receiver or antenna is positioned near a  
radiation source such as a TV, CD player,  
CD recorder, DVD player, etc.  
Change the position of the interfering unit  
or try to switch it off.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(code) DFU 00.8.6 1:00 PM ージ39  
Samsung......................0067, 0171  
Scientific Atlanta ..........0035, 0044, 0504  
Seam ...........................0537  
Signal...........................0042, 0067  
Signature .....................0038  
CABLE BOX  
ABC .............................0030, 0035, 0038, 0040, 0028, 0034,  
0041, 0044  
Allegro..........................0180, 0342  
Antronix........................0049, 0234  
Archer ..........................0049, 0180, 0234, 0824  
Belcor...........................0083  
Bell & Howell ...............0041  
Cable Star....................0083  
Cabletenna ..................0049  
Cableview ....................0049  
Sprucer ........................0048  
Starcom .......................0030, 0042  
Stargate .......................0067, 0042, 0824  
Starquest .....................0042  
Sylvania .......................0028  
TFC..............................0337  
TV86 ............................0090  
Tandy...........................0285  
Century ........................0180  
Citizen..........................0180, 0342  
Colour Voice ................0052, 0058  
Comtronics...................0067  
Contec .........................0046  
Digi...............................0664  
Eastern ........................0029  
Emerson ......................0824  
Everquest.....................0042, 0067  
Focus...........................0427  
France Telecom...........0923  
TeleCaption .................0248  
Teleview.......................0067  
Texscan .......................0028  
Timeless ......................0445  
Tocom..........................0039, 0040  
Toshiba........................0027  
Tusa.............................0042  
Unika............................0234, 0180, 0049  
United Artists ...............0034  
Universal......................0234, 0049, 0083, 0218, 0180  
Viewstar.......................0285, 0054, 0090  
Westminster.................0132  
GC Electronics.............0083, 0234  
Garrard ........................0180  
Gemini .........................0269, 0042  
General Instrument......0303, 0503, 0038, 0837  
GoldStar.......................0067, 0171  
Goodmind ....................0824  
Hamlin..........................0047, 0036, 0286, 0061  
Hitachi..........................0038  
Zenith...........................0027, 0552, 0081, 0035, 0042, 0234  
Zentek..........................0427  
CD  
ADC .............................0045  
Adcom..........................0261, 0182  
Aiwa.............................0151, 0039, 0184  
Akai..............................0183  
Anthem ........................0924  
Audio Alchemy.............0221  
Audio-Technica............0197  
BSR .............................0272, 0221  
Burmester ....................0447  
California Audio Lab ....0056  
Carrera.........................0221  
Carver..........................0184, 0206, 0464  
Craig ............................0642  
Crown ..........................0149  
Curtis Mathes...............0056  
DAK .............................0272  
DBX .............................0281  
DKK .............................0027  
Denon ..........................0030, 0061, 0900  
Emerson ......................0182, 0191, 0332, 0496  
Fisher...........................0115, 0206, 0201, 0369  
GE................................0036  
Garrard ........................0307, 0272, 0420, 0447, 0452  
Genexxa ......................0059, 0191, 0332  
GoldStar.......................0444  
Harman/Kardon ...........0200, 0184, 0453  
Hitachi..........................0059, 0182  
JVC..............................0099, 0682, 0685  
Kenwood......................0055, 0217, 0708, 0853, 0064  
Kodak...........................0314  
Hytex............................0034  
Jasco ...........................0042, 0180, 0342  
Jerrold..........................0030, 0039, 0303, 0038, 0041, 0042,  
0051, 0503, 0837  
Linsay ..........................0467  
Magnavox ....................0054, 0041  
Memorex......................0027  
Movie Time ..................0090, 0183  
NAP .............................0034  
NSC .............................0183, 0090  
Novaplex......................0645  
Oak ..............................0046, 0034  
Optimus .......................0048  
Panasonic....................0048, 0134, 0027  
Panther ........................0664  
Paragon .......................0027  
Philips ..........................0052, 0058, 0269, 0317, 0054, 0180  
Pioneer ........................0171, 0050, 0560  
Popular Mechanics ......0427  
Proscan........................0048  
Pulsar...........................0027  
Quasar.........................0027  
RCA .............................0048  
Radio Shack ................0824, 0042, 0342, 0910  
Realistic .......................0234  
Recoton .......................0427  
Regal ...........................0286, 0047  
Regency.......................0029  
Rembrandt...................0038  
Runco ..........................0027  
SL Marx .......................0067  
Krell..............................0184  
Kyocera........................0045  
LXI ...............................0332  
Linn..............................0184  
Luxman........................0120  
MCS.............................0056, 0070  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(code) DFU 00.8.6 1:00 PM ージ40  
MGA.............................0110  
MTC.............................0447  
Magnavox ....................0184, 0553, 0332  
Marantz........................0184, 0056, 0207, 0462  
McIntosh ......................0314  
Onkyo ..........................0162, 0163, 0309  
Optimus .......................0247, 0054, 0364, 0466  
Panasonic....................0256  
Philips ..........................0056  
Pioneer ........................0054, 0247, 0126  
Proscan........................0053  
Mission.........................0184  
Mitsubishi.....................0110  
NAD .............................0046  
RCA .............................0053  
Revox...........................0217  
NEC .............................0261, 0070  
NSM.............................0184  
Nakamichi....................0174  
Sansui..........................0036, 0056  
Sharp ...........................0258  
Sherwood.....................0364  
Nikko............................0197, 0191, 0201  
Onkyo ..........................0128, 0895  
Optimus .......................0447, 0495, 0059, 0453, 0206, 0223,  
0464, 0202, 0332, 0064, 0114, 0172,  
0221, 0307, 0369, 0027  
Panasonic....................0056, 0394, 0330, 0779  
Parasound ...................0447, 0221  
Philips ..........................0184, 0314  
Pioneer ........................0059, 0495, 0271, 0332  
Proscan........................0080  
Proton ..........................0184  
QED.............................0184  
Quasar.........................0056  
RCA .............................0080, 0332, 0036, 0182, 0206, 0791  
Realistic .......................0182, 0202, 0191, 0206, 0207, 0447  
Rotel ............................0184, 0447, 0924  
SAE..............................0184  
Sony.............................0270, 0197, 0318  
Teac.............................0335, 0316  
Technics ......................0256  
Victor............................0300  
Wards ..........................0054  
Yamaha .......................0121, 0124  
DVD  
Harman/Kardon ...........0609  
JVC..............................0585  
Kenwood......................0561  
Magnavox ....................0530  
Mitsubishi.....................0548  
Onkyo ..........................0530  
Optimus .......................0552  
Panasonic....................0517  
Philips ..........................0566, 0530  
Pioneer ........................0552, 0598  
Proscan........................0549  
RCA .............................0549  
Samsung......................0600  
Sony.............................0560  
Technics ......................0517  
Thomson......................0578  
Toshiba........................0530  
Yamaha .......................0572, 0517  
Zenith...........................0618, 0530  
STS..............................0045  
Sansui..........................0229, 0184, 0332  
Sanyo...........................0114, 0206  
Scott.............................0191, 0182, 0332  
Sears ...........................0332  
Sharp ...........................0064, 0207, 0888  
Sherwood.....................0141, 0207, 0223, 0453  
Shure ...........................0070  
Sony.............................0027, 0212, 0631, 0517, 0632  
Soundesign..................0172, 0452  
Sylvania .......................0184  
Tascam........................0447  
TV  
Teac.............................0420, 0447, 0201, 0207  
Technics ......................0056, 0330, 0234  
Toshiba........................0046  
Vector Research..........0221, 0444  
Victor............................0099  
Wards ..........................0080, 0184  
Yamaha .......................0214, 0063, 0197  
Yorx .............................0488  
A-Mark .........................0030  
AOC.............................0079, 0030, 0212, 0046, 0057  
Abex.............................0059  
Admiral.........................0120  
Adventura ....................0073  
Aiko..............................0119  
Akai..............................0057  
Alaron ..........................0206  
Zenith...........................0642  
Allegro..........................0747, 0801  
Ambassador.................0204  
Ampro ..........................0778  
Anam ...........................0207  
Anam National .............0082  
Archer ..........................0030  
Audiovox......................0119, 0030, 0207, 0478, 0650  
Aumark ........................0087  
Baysonic ......................0207  
Belcor...........................0046  
Bell & Howell ...............0043, 0181  
Bradford.......................0207  
Brockwood...................0046  
Broksonic.....................0030, 0263, 0490  
CCE .............................0064, 0244  
TAPE  
Aiwa.............................0224, 0227, 0056  
Akai..............................0310  
Carver..........................0056  
Denon ..........................0103  
Fisher...........................0101  
Garrard ........................0335, 0466  
Harman/Kardon ...........0209, 0056  
JVC..............................0271, 0300  
Kenwood......................0098, 0097, 0260  
Magnavox ....................0056  
Marantz........................0056, 0036  
Mitsubishi.....................0310  
NAD .............................0171  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(code) DFU 00.8.6 1:00 PM ージ41  
CXC .............................0207  
Candle .........................0213, 0073, 0057, 0083  
Capehart......................0079  
MGA.............................0177, 0046, 0057, 0205  
MTC.............................0087, 0046, 0057, 0212, 0083  
Magnavox ....................0081, 0214, 0051, 0123, 0047, 0213,  
0057, 0413, 0206  
Carnivale......................0057  
Carver..........................0081  
Celebrity.......................0027  
Cineral .........................0478, 0119  
Citizen..........................0213, 0073, 0083, 0057, 0066, 0087,  
0119, 0307  
Majestic........................0043  
Marantz........................0081, 0064, 0057  
Matsushita ...................0078, 0277  
Megatron......................0030, 0172, 0205  
Memorex......................0205, 0043, 0083, 0087, 0177, 0181,  
0277  
Clairtone ......................0212  
Concerto ......................0083  
Contec .........................0184, 0207, 0212  
Craig ............................0207  
Midland ........................0044, 0059, 0066, 0074, 0078, 0162  
Minutz ..........................0048  
Mitsubishi.....................0177, 0046, 0205, 0120  
Motorola.......................0082, 0120  
Multitech ......................0244, 0207  
NAD .............................0183, 0193, 0205  
NEC .............................0057, 0046, 0083, 0524  
NTC .............................0119  
Crosley.........................0081  
Crown ..........................0066, 0207  
Curtis Mathes...............0087, 0057, 0181, 0043, 0066, 0074,  
0078, 0081, 0083, 0120, 0172, 0193,  
0478, 0493  
Daewoo........................0119, 0650, 0046, 0651, 0478, 0066  
Daytron ........................0046, 0066  
Denon ..........................0172  
Dumont ........................0044, 0046  
Dwin.............................0747, 0801  
Dynatech......................0244  
Electroband..................0027, 0212  
Electrohome.................0408  
Emerson ......................0263, 0207, 0205, 0206, 0490, 0204,  
0309, 0307, 0651, 0066, 0212, 0650,  
0046, 0065, 0181  
Envision .......................0057  
Fisher...........................0181, 0186  
Fujitsu ..........................0206  
Funai............................0207, 0198, 0206  
Futuretech....................0207  
GE................................0048, 0054, 0074, 0082, 0078, 0205,  
0162, 0309, 0478, 0120  
Gibralter.......................0044, 0046, 0057  
Go Video......................0087  
GoldStar.......................0028, 0205, 0057, 0046, 0059, 0066,  
0083  
Gradiente.....................0083, 0080  
Grundig........................0064, 0222  
Grunpy.........................0206, 0207  
Hallmark.......................0205  
Nikko............................0205, 0044, 0074, 0057, 0119, 0181,  
0183  
Noshi............................0045  
Onwa ...........................0207  
Optimus .......................0277, 0193, 0181  
Optonica ......................0120, 0192  
Orion............................0263, 0206, 0490  
Panasonic....................0078, 0277, 0082, 0028, 0074, 0080,  
0081, 0087, 0120, 0172, 0177, 0181,  
0183, 0192, 0205  
Penney.........................0074, 0057, 0087, 0048, 0054, 0162,  
0045, 0205, 0078, 0066, 0046, 0030,  
0059, 0083, 0183  
Philco...........................0047, 0046, 0057, 0081, 0123, 0172,  
0490, 0051, 0213, 0214  
Philips ..........................0081, 0044, 0047, 0066, 0064, 0027,  
0045, 0046, 0048, 0051, 0054, 0079  
Pilot..............................0046, 0057, 0066  
Pioneer ........................0193, 0065  
Portland .......................0119, 0046, 0066  
Prism............................0078  
Proscan........................0074, 0057  
Proton ..........................0493, 0205, 0030, 0079  
Pulsar...........................0044, 0046  
Quasar.........................0078, 0082, 0277, 0192  
RCA .............................0074, 0045, 0162, 0046, 0065, 0078,  
0117, 0120  
Harley Davidson ..........0206  
Harman/Kardon ...........0081  
Harvard........................0207  
Radio Shack ................0192, 0207, 0205, 0057, 0066, 0046,  
0181, 0059, 0074, 0083  
Hitachi..........................0172, 0178, 0065, 0083, 0059  
Infinity ..........................0081  
Inteq.............................0044  
Realistic .......................0192, 0207, 0181, 0057, 0066, 0205,  
0046, 0059, 0083  
Rhapsody.....................0212  
JBL...............................0081  
JCB..............................0027  
JVC..............................0080  
Janeil ...........................0073  
Runco ..........................0044, 0524, 0057  
SSS..............................0046, 0207  
Sampo .........................0057, 0059, 0066, 0079  
Samsung......................0087, 0059, 0205, 0046, 0057, 0066,  
0083, 0064  
KEC .............................0207  
KTV..............................0307, 0207, 0212, 0244, 0066, 0057  
Kaypani........................0079  
Kenwood......................0057, 0046  
Kloss............................0073, 0051  
LG................................0083  
Samsux........................0066  
Sansei..........................0478  
Sansui..........................0490  
Sanyo...........................0181, 0186, 0173  
Scimitsu .......................0046  
LXI ...............................0181, 0205, 0074, 0044, 0081, 0183  
Loewe ..........................0539  
Logik ............................0043  
Scotch..........................0205  
Scott.............................0263, 0205, 0206, 0207, 0046  
Sears ...........................0186, 0181, 0173, 0183, 0081, 0083,  
0198, 0205, 0074, 0206  
Luxman........................0083  
MEI ..............................0212  
Semivox.......................0207  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(code) DFU 00.8.6 1:00 PM ージ42  
Semp ...........................0183  
Sharp ...........................0192, 0120, 0413, 0066, 0184  
Shogun ........................0046  
Signature .....................0043  
Simpson.......................0213, 0214  
Sony.............................0027, 0138, 0107  
Soundesign..................0205, 0207, 0206, 0213  
Spectricon....................0030  
Craig ............................0064, 0074, 0099, 0267, 0298  
Curtis Mathes...............0062, 0068, 0087, 0189  
Cybernex .....................0078, 0267  
Daewoo........................0305, 0588, 0047, 0072  
Daytron ........................0047  
Denon ..........................0069  
Dynatech......................0027  
Electrohome.................0064  
Squareview..................0198  
Starlite..........................0207  
Electrophonic...............0064  
Emerex ........................0059  
Supre-Macy .................0073  
Supreme ......................0027  
Sylvania .......................0081, 0047, 0123, 0057, 0408, 0051,  
0213, 0214  
Emerson ......................0211, 0029, 0148, 0236, 0063, 0238,  
0305, 0321, 0115, 0235, 0506, 0088,  
0239, 0588, 0095, 0322, 0388, 0027,  
0064, 0070  
Symphonic...................0198  
TMK .............................0083, 0204, 0205  
Tandy...........................0120  
Fisher...........................0074, 0131, 0081, 0093  
Fuji...............................0060, 0062  
Funai............................0027  
Tatung..........................0030, 0082  
Technics ......................0078, 0277, 0044, 0074  
Technol Ace.................0206  
Techwood ....................0030, 0078, 0083  
Teknika ........................0213, 0043, 0206, 0046, 0066, 0081,  
0207, 0083, 0119, 0177, 0087  
GE................................0062, 0087, 0229, 0075, 0267  
Garrard ........................0027  
Go Video......................0459, 0553  
GoldStar.......................0064, 0065  
Gradiente.....................0035, 0027  
HI-Q .............................0074  
Telefunken...................0083  
Toshiba........................0183, 0087, 0181  
Tosonic ........................0212  
Harley Davidson ..........0027  
Harman/Kardon ...........0108, 0065  
Harwood ......................0095, 0099  
Headquarter.................0073  
Totevision ....................0066  
Trical............................0184  
Universal......................0054, 0048  
Vector Research..........0057  
Hitachi..........................0069, 0132, 0027, 0068  
JVC..............................0094, 0035, 0068  
Jensen .........................0068  
Victor............................0080  
Vidikron........................0081  
KEC .............................0064, 0305  
KLH..............................0099  
Vidtech.........................0046, 0205  
Viking...........................0073  
Wards ..........................0081, 0192, 0205, 0183, 0043, 0047,  
0048, 0123, 0138, 0214, 0054, 0107,  
0206, 0046, 0057, 0083, 0162  
Kenwood......................0068, 0094, 0065, 0073  
Kodak...........................0062, 0064  
LXI ...............................0064  
Lloyd‘s..........................0027, 0235  
Logik ............................0099  
White Westinghouse....0651, 0650  
Yamaha .......................0046, 0057  
Zenith...........................0044, 0043, 0119, 0173  
Zonda...........................0030  
MEI ..............................0062  
MGA.............................0070, 0088, 0267  
MGN Technology.........0267  
MTC.............................0027, 0267  
Magnasonic .................0305  
Magnavox ....................0062, 0108, 0027, 0066, 0176  
Magnin.........................0267  
Marantz........................0108, 0065, 0062  
Marta............................0064  
Matsushita ...................0062, 0481, 0189  
Memorex......................0131, 0074, 0027, 0064, 0062, 0075,  
0267, 0334, 0073, 0066  
Metz.............................0033, 0064, 0189, 0323  
Minolta .........................0132, 0069  
Mitsubishi.....................0070, 0088, 0094, 0075  
Motorola.......................0062, 0075  
Multitech ......................0027, 0099  
NAD .............................0085  
NAP .............................0060, 0061, 0062, 0064, 0066, 0069,  
0093, 0132  
NEC .............................0065, 0067, 0068, 0094, 0131  
Nikko............................0064  
Nikon............................0061, 0280  
Noblex..........................0267  
Olympus.......................0062  
Optimus .......................0085, 0075, 0064, 0459, 0131, 0189,  
0481  
Optonica ......................0089  
VCR  
Admiral.........................0075  
Adventura ....................0027  
Aiko..............................0305  
Aiwa.............................0334, 0027, 0064  
Akai..............................0133, 0080, 0088, 0068  
American High .............0062  
Asha.............................0267  
Audiovox......................0064  
Beaumark ....................0267  
Bell & Howell ...............0131  
Blaupunkt.....................0033  
Broksonic.....................0211, 0148, 0388, 0029, 0236, 0238,  
0322, 0506  
CCE .............................0099, 0305  
Calix.............................0064  
Canon ..........................0062  
Capehart......................0047  
Carver..........................0108  
Cineral .........................0305  
Citizen..........................0305, 0064  
Colt ..............................0099  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SR4000U(code) DFU 00.8.6 1:00 PM ージ43  
Orion............................0506, 0322, 0029, 0211  
Panasonic....................0062, 0104, 0189, 0252, 0481  
Penney.........................0062, 0267, 0064, 0065, 0069, 0067,  
0081  
Pentax..........................0069, 0132  
Philco...........................0062, 0506, 0236  
Philips ..........................0108, 0062, 0089  
Pilot..............................0064  
Pioneer ........................0085, 0094  
Portland .......................0047  
Profitronic.....................0267  
Proscan........................0087, 0229  
Protec ..........................0099  
Pulsar...........................0066, 0078  
Quarter.........................0073  
SAT  
AlphaStar.....................0799  
Astro Industries............0122  
BSR .............................0122  
Capetronic ...................0122  
Channel Master ...........0045, 0239  
Chaparral.....................0080, 0236, 0243  
DX Antenna .................0068  
Drake ...........................0091, 0272, 0045  
Echostar.......................0307, 0802, 0175, 0186, 0296  
Expressvu....................0802  
General Instrument......0388, 0896, 0654  
Grundig........................0200  
HTS..............................0802  
Hitachi..........................0846  
Homecable...................0265  
Hughes Network Syst. ..0776  
Hytek............................0122  
IQ.................................0237  
IQ Prism.......................0237  
JVC..............................0802  
Janeil ...........................0179  
Quartz..........................0073  
Quasar.........................0062, 0189, 0104, 0481  
RCA .............................0087, 0176, 0229, 0069, 0132, 0104,  
0133, 0062, 0075, 0267  
Radio Shack ................0027  
Radix............................0064  
Randex ........................0064  
Realistic .......................0074, 0027, 0131, 0075, 0064, 0062,  
0089, 0073, 0093  
Ricoh............................0061, 0280  
Runco ..........................0066  
Jerrold..........................0388, 0654  
Legend.........................0296  
Macom.........................0045  
Magnavox ....................0749, 0751  
Memorex......................0296, 0751  
Next Level....................0896  
Panasonic....................0179, 0728  
Philips ..........................0227, 0126, 0749, 0751  
President......................0101  
Primestar .....................0654, 0388  
Proscan........................0593  
RCA .............................0593, 0170, 0882  
Radio Shack ................0593  
Realistic .......................0079  
STS..............................0237, 0068  
Sony.............................0666  
Star Choice..................0896  
Star Trak......................0207  
STS..............................0069  
Samsung......................0267, 0072, 0080, 0078  
Sanky...........................0066, 0075  
Sansui..........................0506, 0068, 0298, 0027, 0094  
Sanyo...........................0073, 0074, 0131, 0267  
Scott.............................0211, 0148, 0238, 0072, 0237, 0239,  
0070  
Sears ...........................0069, 0132, 0081, 0073, 0064, 0074,  
0131, 0027, 0062, 0093  
Semp ...........................0072  
Sharp ...........................0075, 0089  
Shintom........................0099  
Shogun ........................0078, 0267  
Signature .....................0062  
Singer ..........................0099  
Toshiba........................0109, 0817  
Uniden .........................0265, 0397, 0079, 0101, 0751, 0103,  
0749  
Sony.............................0060, 0061, 0059, 0280, 0062, 0027  
Sunpak.........................0280  
Sylvania .......................0062, 0108, 0027, 0070  
Symphonic...................0027  
Zenith...........................0091, 0883, 0272  
TMK .............................0063, 0235, 0267  
Tatung..........................0068  
Teac.............................0027, 0068  
Technics ......................0062, 0189, 0066, 0087, 0229  
Teknika ........................0027, 0062, 0064  
Thomas........................0027  
Toshiba........................0072, 0239, 0237, 0093, 0070  
Totevision ....................0064, 0267  
Unitech.........................0267  
Vector ..........................0072  
Vector Research..........0065, 0067  
Video Concepts ...........0067, 0088, 0072  
Videosonic ...................0267  
Wards ..........................0062, 0075, 0089, 0027, 0087, 0074,  
0072, 0267, 0239, 0069, 0099, 0176,  
0108  
White Westinghouse....0305  
XR-1000.......................0099, 0027, 0062  
Yamaha .......................0065, 0068  
Zenith...........................0066, 0060, 0061, 0027, 0506  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
COUNTRY  
AUSTRALIA  
AUSTRIA  
BELGIUM  
BULGARIA  
CANADA  
COMPANY  
ADDRESS  
Scan audio Pty. Ltd.  
Huber & Prohaska GmbH  
Van der Heyden Audio N.V.  
Ariescommerce GmbH  
Lenbrook Industries Limited  
Empire Hifi systems Ltd.  
Audio International  
Hi-Fi Klubben Denmark  
V.V.& SONS  
4 Station Street, Thornleigh NSW 2120, Australia  
Taborstraße 95 / Ladestraße 1, Gebäude Hangartner, A-1200 Wien, Austria  
Brusselbaan 278, 9320 Erembodegem, Belgium  
Makedonia Blvd. 16, 1606 Sofia, Bulgaria  
633 Granite Court, Pickering, Ontario  
CYPRUS  
P.O. Box 5604, Nicosia, Cyprus  
CZECH REPUBLIC  
DENMARK  
DUBAI  
Fugnerova 1, 67801 Blansko, Czech Republic  
Aboulevarden 1, DK-8000 Arhus C., Denmark  
P.O. Box 105, Dubai, U.A.E.  
ESTONIA  
F.Y.R.O.M.  
FINLAND  
Audio International Baltic  
T.P. KODI  
Lo Hu 12, EE0026 Tallin, Estonia  
ul.Cedomir Kantargiev 21a, Skopje, Former Yugoslavian Republic of Macedonija  
Uudenmaankatu 4-6, SF-00120 Helsinki, Finland  
A division of Marantz Europe B.V., P.O. Box 301, 92 156 Suresnes Cedex, France  
Hakenbusch 3, 49078 Osnabrück, Germany  
Hi-Fi Klubi Finland  
Marantz France  
FRANCE  
GERMANY  
GREECE  
Marantz Deutschland  
Adamco S.A.  
188, Hippocratous Street, 11471 Athens, Greece  
Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
Unit 1706, Metroplaza ll, 223 Hing Fong Road, Kwai Fong, N.T., Kowloon, Hong Kong  
Terez Krt.31, 1067 Budapest, Hungary  
HEADQUARTERS EUROPE: Marantz Europe B.V.  
HONG KONG  
HUNGARY  
ICELAND  
Marantz Asia Ltd.  
Infovox Ltd.  
Radiobudin HF  
Marantz India  
Skipholti 19, P.O. Box 424, 121 Reykjavik, Iceland  
c/o Philips India Ltd., Plot 80, Bhosari Industrial Estate Pune - 411026, India  
5th floor no 878 Philips Building Enghelab ave, P.O. 11365/7844 Tehran, Iran  
Clonskeagh, Dublin 14, Ireland  
INDIA  
IRAN  
Home Co.  
IRELAND  
Marantz Ireland  
Elmor Ltd.  
ISRAEL  
52 Heh Beiyar Street, Kikar Hamedina, Tel Aviv, Israel  
Via Casati 23, 20052 Monza (Milano), Italy, Servizio Consumatori 1678-20026, Numero Verde  
35-1 Sagami Ohno 7-Chome, Sagamihara-shi, Kanagawa 228-8505,Japan  
#604 Electro-officetel, 16-58, 3GA Hangang-ro, Yongsan-ku, Seoul 140-013 Korea  
P.O. Box 8196, Salmiah 22052, Kuwait  
ITALY  
Marantz Italy  
JAPAN  
Marantz Japan Inc.  
Mk Enterprises Ltd.  
alAlamiah Electronics Intl.  
Ace Ltd.  
KOREA  
KUWAIT  
LATVIA  
61, LacPlesa Str., Riga LV 1011, Latvia  
LEBANON  
LITHUANIA  
MALAYSIA  
MALTA  
AZ Electronics S.A., 1,  
A Accapella Ltd.  
P.O. Box 11 2833, Beirut, Lebanon  
Ausros, Vartu G5, Pasazo Skg., 2001 Vilnius, Lithuania  
Wo Kee Hong Electronics Sdn. Bhd. 102 Jalan SS 21/35, Damansara Utama, 47400 Petaling Jaya, Selangordarul Ehsan, Malaysia  
Doneo Co Ltd.  
78 The Strand, Sliema SLM07, Malta  
MAURITIUS  
NETHERLANDS  
NEW ZEALAND  
NORWAY  
OMAN  
SKR Electronics Ltd.  
Marantz Trading  
P.O. Box 685, Bell Village, Port Louis, Mauritius  
A division of Marantz Europe B.V., Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
4 Station Street, Thornleigh NSW 2120, Australia  
Scan audio Pty. Ltd.  
Hi-Fi Klubben Norway  
Mustafa & Jawad Trading CO.  
Marantz Polska  
Lillegrensen 7, N-0159 Oslo, Norway  
P.O. Box 1918, Ruwi, Oman  
POLAND  
Ul. Marszalkowska 45/49, 00-648 Warszawa, Poland  
PORTUGAL  
PROFESSIONAL EUROPE  
PROFESSIONAL U.S.A.  
QATAR  
Corel2  
Comércio de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal  
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.  
Distributed by: Superscope Technologies Inc., 1000 Corporate Blvd. Ste.D, Aurora, Illino  
P.O. Box 49, Doha, Qatar  
Marantz Professional Products  
Marantz Professional Products  
Almana & Partners W.W.L.  
Vision +  
REUNION  
ROMANIA  
RUSSIA  
180 Rue du Marechal Leclerc, 97400 Saint Denis, Ile de la Reunion  
Soseaua Bucuresti, Ploiesti 10, Sector 1, Bucharest, Romania  
Bld. 2, 7 Montazhnaya Street, 107497 Moscow, Russia  
Alltrom SRL  
Trade Company SV  
Ultimate Fidelity  
SAUDI ARABIA  
SINGAPORE  
SLOVAKIA  
SLOVENIA  
SOUTH AFRICA  
SPAIN  
Sameria Comm. Center, Roadah Dist., P.O. Box 7760, Jeddah 21472, Saudi Arabia  
Wo Kee Hong Centre, 29 Leng Kee Road, Singapore 159099, Singapore  
Nam. SNP 10, 96001 Zvolem, Slovakia  
Forward Marketing (S) Pte. Ltd.  
Audio International Slovakia  
Bofex  
Smartinska 152, HALA V/3, 61000 Ljubljana, Slovenia  
Coherent Imports (PTY) Ltd.  
Marantz Spain  
P.O. Box 1614, Alberton, 1450, South Africa  
Martinez Villergas 2, Apartado 2065, Madrid 28027, Spain  
Tegnersgatan 21, S-412 52 Gotenborg, Sweden  
SWEDEN  
Hi-Fi Klubben A.B.  
Sound Company AG  
Covecolor  
SWITZERLAND  
TAHITI  
Postfach, 8010 Zürich, Switzerland  
Av. Prince Hinoi, Cours de l'union sacré, P.O. Box 2334, Papeete, Tahiti  
6th No 148 Sung Kiang Road, Taipei 10429, Taiwan R.O.C.  
746-750 Mahachai Road, Wangburapa, Bangkok 10200, Thailand  
Sanayi Ve Ticaret Ltd. Sti., Selvi Kokak, No. 4/1, Senlikkoy, 34810 Florya, Istanbul, Turkey  
Kingsbridge House, Padbury Oaks, 575-583 Bath Road, Longford, Middlesex UB7 0EH, U.K.  
440 Medinah Road, Roselle, IL 60172, U.S.A.  
TAIWAN  
Pai-Yuing Co. Ltd.  
MRZ Standard Co. Ltd.  
Penta Elektronic  
THAILAND  
TURKEY  
U.K.  
Marantz Hifi UK Ltd.  
Marantz America Inc.  
ITM  
U.S.A.  
YUGOSLAVIA  
EXPORT  
Ljutice Bogdana la, Belgrade, Yugoslavia  
Marantz Trading  
A division of Marantz Europe B.V., Building SFF-2, P.O. Box 80002, 5600 JB Eindhoven, The Netherlands  
Manufactured under license from Dolby Laboratories. “Dolby”, and “Pro Logic”, are trademarks of Dolby Laboratories. Confidential Unpublished  
Works. © 1992-1997 Dolby Laboratories, Inc. All rights reserved.  
is a registered trademark.  
Printed in Singapore  
99 / 08 MIT  
284W851250  
3104 215 3618.1  
SR4000U DFU cover  
Page 4  
00.8.6, 0:51 PM  
Adobe PageM aker6.5J/PPC  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Lincoln Electric Welder 4R90 User Manual
Lopi Indoor Fireplace Clean Face Gas Fireplace User Manual
Lucent Technologies Network Card MS+DSL User Manual
Mackie Recording Equipment XD 2 User Manual
Magnavox TV DVD Combo 32MD350B User Manual
Makita Cordless Drill 6223DE User Manual
Mamp;S Systems Speaker WG100C User Manual
McCulloch Blower MAC GB 275 User Manual
McCulloch Lawn Mower 96041016500 User Manual
Midland Radio Camcorder XTC300 User Manual